net: use bool values to pass bool param of phy_init_eee()

The 2nd param of phy_init_eee(): clk_stop_enable is a bool param, use
true or false instead of 1/0.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220123152241.1480-1-jszhang@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 3867f3d..a3b9899 100644 (file)
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -2186,7 +2186,7 @@ int b53_eee_init(struct dsa_switch *ds, int port, struct phy_device *phy)
 {
        int ret;
 
-       ret = phy_init_eee(phy, 0);
+       ret = phy_init_eee(phy, false);
        if (ret)
                return 0;
 

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index b82512e..bc77a26 100644 (file)
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2846,7 +2846,7 @@ static void mt753x_phylink_mac_link_up(struct dsa_switch *ds, int port,
                        mcr |= PMCR_RX_FC_EN;
        }
 
-       if (mode == MLO_AN_PHY && phydev && phy_init_eee(phydev, 0) >= 0) {
+       if (mode == MLO_AN_PHY && phydev && phy_init_eee(phydev, false) >= 0) {
                switch (speed) {
                case SPEED_1000:
                        mcr |= PMCR_FORCE_EEE1G;

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 87f1056..cfe0911 100644 (file)
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -1368,7 +1368,7 @@ static int bcmgenet_set_eee(struct net_device *dev, struct ethtool_eee *e)
        if (!p->eee_enabled) {
                bcmgenet_eee_enable_set(dev, false);
        } else {
-               ret = phy_init_eee(dev->phydev, 0);
+               ret = phy_init_eee(dev->phydev, false);
                if (ret) {
                        netif_err(priv, hw, dev, "EEE initialization failed\n");
                        return ret;

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 796133d..11227f5 100644 (file)
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -2797,7 +2797,7 @@ static int fec_enet_eee_mode_set(struct net_device *ndev, bool enable)
        int ret = 0;
 
        if (enable) {
-               ret = phy_init_eee(ndev->phydev, 0);
+               ret = phy_init_eee(ndev->phydev, false);
                if (ret)
                        return ret;
 

diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 309bd3e..57c708b 100644 (file)
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -4212,7 +4212,7 @@ static void mvneta_mac_link_up(struct phylink_config *config,
        mvneta_port_up(pp);
 
        if (phy && pp->eee_enabled) {
-               pp->eee_active = phy_init_eee(phy, 0) >= 0;
+               pp->eee_active = phy_init_eee(phy, false) >= 0;
                mvneta_set_eee(pp, pp->eee_active && pp->tx_lpi_enabled);
        }
 }

diff --git a/drivers/net/ethernet/microchip/lan743x_ethtool.c b/drivers/net/ethernet/microchip/lan743x_ethtool.c
index 91a755e..5f1e7b8 100644 (file)
--- a/drivers/net/ethernet/microchip/lan743x_ethtool.c
+++ b/drivers/net/ethernet/microchip/lan743x_ethtool.c
@@ -750,7 +750,7 @@ static int lan743x_ethtool_set_eee(struct net_device *netdev,
        }
 
        if (eee->eee_enabled) {
-               ret = phy_init_eee(phydev, 0);
+               ret = phy_init_eee(phydev, false);
                if (ret) {
                        netif_err(adapter, drv, adapter->netdev,
                                  "EEE initialization failed\n");

diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
index 32161a5..77a0d9d 100644 (file)
--- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
@@ -127,7 +127,7 @@ bool sxgbe_eee_init(struct sxgbe_priv_data * const priv)
        /* MAC core supports the EEE feature. */
        if (priv->hw_cap.eee) {
                /* Check if the PHY supports EEE */
-               if (phy_init_eee(ndev->phydev, 1))
+               if (phy_init_eee(ndev->phydev, true))
                        return false;
 
                priv->eee_active = 1;