if FIT
+config FIT_EXTERNAL_OFFSET
+ hex "Text Base"
+ default 0x0
+ help
+ This specifies a data offset in fit image.
+ The offset is from data payload offset to the beginning of
+ fit image header. When specifies a offset, specific data
+ could be put in the hole between data payload and fit image
+ header, such as CSF data on i.MX platform.
+
config FIT_ENABLE_SHA256_SUPPORT
bool "Support SHA256 checksum of FIT image contents"
default y
>$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
quiet_cmd_mkfitimage = MKIMAGE $@
-cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(U_BOOT_ITS) -E $@ \
+cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(U_BOOT_ITS) -E $@ -p $(CONFIG_FIT_EXTERNAL_OFFSET)\
>$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
quiet_cmd_cat = CAT $@
@echo >&2 "See doc/README.fdt-control for more info."
@echo >&2 "===================================================="
endif
+ifeq ($(CONFIG_SPI),y)
+ifneq ($(CONFIG_DM_SPI)$(CONFIG_OF_CONTROL),yy)
+ @echo >&2 "===================== WARNING ======================"
+ @echo >&2 "This board does not use CONFIG_DM_SPI. Please update"
+ @echo >&2 "the board before v2019.04 for no dm conversion"
+ @echo >&2 "and v2019.07 for partially dm converted drivers."
+ @echo >&2 "Failure to update can lead to driver/board removal"
+ @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+ @echo >&2 "===================================================="
+endif
+endif
+ifeq ($(CONFIG_SPI_FLASH),y)
+ifneq ($(CONFIG_DM_SPI_FLASH)$(CONFIG_OF_CONTROL),yy)
+ @echo >&2 "===================== WARNING ======================"
+ @echo >&2 "This board does not use CONFIG_DM_SPI_FLASH. Please update"
+ @echo >&2 "the board to use CONFIG_SPI_FLASH before the v2019.07 release."
+ @echo >&2 "Failure to update by the deadline may result in board removal."
+ @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+ @echo >&2 "===================================================="
+endif
+endif
@# Check that this build does not use CONFIG options that we do not
@# know about unless they are in Kconfig. All the existing CONFIG
@# options are whitelisted, so new ones should not be added.
SPL: spl/u-boot-spl.bin FORCE
$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+ifeq ($(CONFIG_ARCH_IMX8M), y)
+flash.bin: spl/u-boot-spl.bin u-boot.itb FORCE
+ $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+endif
+
u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL u-boot.bin FORCE
$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
select DM
select OF_CONTROL
-config ARCH_MX8M
+config ARCH_IMX8M
bool "NXP i.MX8M platform"
select ARM64
select DM
source "arch/arm/mach-imx/imx8/Kconfig"
-source "arch/arm/mach-imx/mx8m/Kconfig"
+source "arch/arm/mach-imx/imx8m/Kconfig"
source "arch/arm/mach-imx/mxs/Kconfig"
libs-y += arch/arm/lib/
ifeq ($(CONFIG_SPL_BUILD),y)
-ifneq (,$(CONFIG_MX23)$(CONFIG_MX28)$(CONFIG_MX35)$(filter $(SOC), mx25 mx5 mx6 mx7 mx35 mx8m))
+ifneq (,$(CONFIG_MX23)$(CONFIG_MX28)$(CONFIG_MX35)$(filter $(SOC), mx25 mx5 mx6 mx7 mx35 imx8m))
libs-y += arch/arm/mach-imx/
endif
else
-ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx7 mx7ulp mx31 mx35 mxs mx8m imx8 vf610))
+ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx7 mx7ulp mx31 mx35 mxs imx8m imx8 vf610))
libs-y += arch/arm/mach-imx/
endif
endif
This architecture supports Freescale ARMv8 SoCs with Chassis generation 2,
for example LS1043A.
+
+Watchdog support Overview
+-------------------
+Support watchdog driver for LSCH2. The driver is disabled in default.
+You can enable it by setting CONFIG_IMX_WATCHDOG.
+Use following config to set watchdog timeout, if this config is not defined,
+the default timeout value is 128s which is the maximum. Set 10 seconds for
+example:
+ #define CONFIG_WATCHDOG_TIMEOUT_MSECS 10000
+Set CONFIG_WATCHDOG_RESET_DISABLE to disable reset watchdog, so that the
+watchdog will not be fed in u-boot.
dtb-$(CONFIG_ARCH_IMX8) += fsl-imx8qxp-mek.dtb
+dtb-$(CONFIG_ARCH_IMX8M) += fsl-imx8mq-evk.dtb
+
dtb-$(CONFIG_RCAR_GEN3) += \
r8a7795-h3ulcb-u-boot.dtb \
r8a7795-salvator-x-u-boot.dtb \
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+/dts-v1/;
+
+/* First 128KB is for PSCI ATF. */
+/memreserve/ 0x40000000 0x00020000;
+
+#include "fsl-imx8mq.dtsi"
+
+/ {
+ model = "Freescale i.MX8MQ EVK";
+ compatible = "fsl,imx8mq-evk", "fsl,imx8mq";
+
+ chosen {
+ bootargs = "console=ttymxc0,115200 earlycon=ec_imx6q,0x30860000,115200";
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_usdhc2_vmmc: usdhc2_vmmc {
+ compatible = "regulator-fixed";
+ regulator-name = "VSD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+ };
+
+ pwmleds {
+ compatible = "pwm-leds";
+
+ ledpwm2 {
+ label = "PWM2";
+ pwms = <&pwm2 0 50000>;
+ max-brightness = <255>;
+ };
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+
+ imx8mq-evk {
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3
+ MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x23
+ MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
+ MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
+ MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
+ MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
+ MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
+ MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
+ MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
+ MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
+ MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
+ MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
+ MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
+ MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
+ MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f
+ MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x4000007f
+ MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x4000007f
+ >;
+ };
+
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_GPIO1_IO13_PWM2_OUT 0x16
+ >;
+ };
+
+ pinctrl_qspi: qspigrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x82
+ MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82
+ MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82
+ MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82
+ MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82
+ MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82
+
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83
+ MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3
+ MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3
+ MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3
+ MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3
+ MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3
+ MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3
+ MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3
+ MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3
+ MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3
+ MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83
+ MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x85
+ MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc5
+ MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc5
+ MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc5
+ MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc5
+ MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc5
+ MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc5
+ MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc5
+ MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc5
+ MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc5
+ MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x85
+ MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x87
+ MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc7
+ MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc7
+ MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc7
+ MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc7
+ MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc7
+ MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc7
+ MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc7
+ MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc7
+ MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc7
+ MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x87
+ MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2grpgpio {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41
+ MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83
+ MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3
+ MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3
+ MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3
+ MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3
+ MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3
+ MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x85
+ MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc5
+ MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc5
+ MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc5
+ MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc5
+ MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc5
+ MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x87
+ MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc7
+ MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc7
+ MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc7
+ MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc7
+ MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc7
+ MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1
+ >;
+ };
+
+ pinctrl_sai2: sai2grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6
+ MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6
+ MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK 0xd6
+ MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6
+ MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0xd6
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
+ >;
+ };
+ };
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy0>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ at803x,led-act-blind-workaround;
+ at803x,eee-disabled;
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pmic: pfuze100@08 {
+ compatible = "fsl,pfuze100";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-always-on;
+ };
+
+ sw1c_reg: sw1c {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-always-on;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3ab {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-always-on;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ regulator-always-on;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "disabled";
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>;
+ status = "okay";
+};
+
+&lcdif {
+ status = "okay";
+ disp-dev = "mipi_dsi_northwest";
+ display = <&display0>;
+
+ display0: display@0 {
+ bits-per-pixel = <24>;
+ bus-width = <24>;
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <9200000>;
+ hactive = <480>;
+ vactive = <272>;
+ hfront-porch = <8>;
+ hback-porch = <4>;
+ hsync-len = <41>;
+ vback-porch = <2>;
+ vfront-porch = <4>;
+ vsync-len = <10>;
+
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};
+
+&qspi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qspi>;
+ status = "okay";
+
+ flash0: n25q256a@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,n25q256a";
+ spi-max-frequency = <29000000>;
+ spi-nor,ddr-quad-read-dummy = <6>;
+ };
+};
+
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ bus-width = <4>;
+ cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <®_usdhc2_vmmc>;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
regulator-max-microvolt = <1400000>;
regulator-always-on;
regulator-boot-on;
-
- /* for rockchip boot on */
- rockchip,pwm_id= <2>;
- rockchip,pwm_voltage = <1000000>;
+ regulator-init-microvolt = <950000>;
};
};
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
+ spi0: spi@54006000 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006000 0x100>;
+ interrupts = <0 39 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
+ spi1: spi@54006100 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006100 0x100>;
+ interrupts = <0 216 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
<&mio_clk 12>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
<&mio_rst 12>;
+ phy-names = "usb";
+ phys = <&usb_phy0>;
has-transaction-translator;
};
<&mio_clk 13>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
<&mio_rst 13>;
+ phy-names = "usb";
+ phys = <&usb_phy1>;
has-transaction-translator;
};
<&mio_clk 14>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
<&mio_rst 14>;
+ phy-names = "usb";
+ phys = <&usb_phy2>;
has-transaction-translator;
};
pinctrl: pinctrl {
compatible = "socionext,uniphier-ld11-pinctrl";
};
+
+ usb-phy {
+ compatible = "socionext,uniphier-ld11-usb2-phy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb_phy0: phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+
+ usb_phy1: phy@1 {
+ reg = <1>;
+ #phy-cells = <0>;
+ };
+
+ usb_phy2: phy@2 {
+ reg = <2>;
+ #phy-cells = <0>;
+ };
+ };
};
soc-glue@5f900000 {
interrupts = <0 65 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
- clocks = <&sys_clk 2>;
+ clock-names = "nand", "nand_x", "ecc";
+ clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
resets = <&sys_rst 2>;
};
};
};
};
+&usb {
+ status = "okay";
+};
+
&nand {
status = "okay";
};
drive-strength = <9>;
};
};
+
+&usb {
+ status = "okay";
+};
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
+ spi0: spi@54006000 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006000 0x100>;
+ interrupts = <0 39 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
+ spi1: spi@54006100 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006100 0x100>;
+ interrupts = <0 216 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
+ spi2: spi@54006200 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006200 0x100>;
+ interrupts = <0 229 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi2>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
+ spi3: spi@54006300 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006300 0x100>;
+ interrupts = <0 230 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi3>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
efuse@200 {
compatible = "socionext,uniphier-efuse";
reg = <0x200 0x68>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* USB cells */
+ usb_rterm0: trim@54,4 {
+ reg = <0x54 1>;
+ bits = <4 2>;
+ };
+ usb_rterm1: trim@55,4 {
+ reg = <0x55 1>;
+ bits = <4 2>;
+ };
+ usb_rterm2: trim@58,4 {
+ reg = <0x58 1>;
+ bits = <4 2>;
+ };
+ usb_rterm3: trim@59,4 {
+ reg = <0x59 1>;
+ bits = <4 2>;
+ };
+ usb_sel_t0: trim@54,0 {
+ reg = <0x54 1>;
+ bits = <0 4>;
+ };
+ usb_sel_t1: trim@55,0 {
+ reg = <0x55 1>;
+ bits = <0 4>;
+ };
+ usb_sel_t2: trim@58,0 {
+ reg = <0x58 1>;
+ bits = <0 4>;
+ };
+ usb_sel_t3: trim@59,0 {
+ reg = <0x59 1>;
+ bits = <0 4>;
+ };
+ usb_hs_i0: trim@56,0 {
+ reg = <0x56 1>;
+ bits = <0 4>;
+ };
+ usb_hs_i2: trim@5a,0 {
+ reg = <0x5a 1>;
+ bits = <0 4>;
+ };
};
};
};
};
+ _usb: usb@65a00000 {
+ compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+ status = "disabled";
+ reg = <0x65a00000 0xcd00>;
+ interrupt-names = "host";
+ interrupts = <0 134 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb1>,
+ <&pinctrl_usb2>, <&pinctrl_usb3>;
+ clock-names = "ref", "bus_early", "suspend";
+ clocks = <&sys_clk 14>, <&sys_clk 14>, <&sys_clk 14>;
+ resets = <&usb_rst 15>;
+ phys = <&usb_hsphy0>, <&usb_hsphy1>,
+ <&usb_hsphy2>, <&usb_hsphy3>,
+ <&usb_ssphy0>, <&usb_ssphy1>;
+ dr_mode = "host";
+ };
+
+ usb-glue@65b00000 {
+ compatible = "socionext,uniphier-ld20-dwc3-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65b00000 0x400>;
+
+ usb_rst: reset@0 {
+ compatible = "socionext,uniphier-ld20-usb3-reset";
+ reg = <0x0 0x4>;
+ #reset-cells = <1>;
+ clock-names = "link";
+ clocks = <&sys_clk 14>;
+ reset-names = "link";
+ resets = <&sys_rst 14>;
+ };
+
+ usb_vbus0: regulator@100 {
+ compatible = "socionext,uniphier-ld20-usb3-regulator";
+ reg = <0x100 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 14>;
+ reset-names = "link";
+ resets = <&sys_rst 14>;
+ };
+
+ usb_vbus1: regulator@110 {
+ compatible = "socionext,uniphier-ld20-usb3-regulator";
+ reg = <0x110 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 14>;
+ reset-names = "link";
+ resets = <&sys_rst 14>;
+ };
+
+ usb_vbus2: regulator@120 {
+ compatible = "socionext,uniphier-ld20-usb3-regulator";
+ reg = <0x120 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 14>;
+ reset-names = "link";
+ resets = <&sys_rst 14>;
+ };
+
+ usb_vbus3: regulator@130 {
+ compatible = "socionext,uniphier-ld20-usb3-regulator";
+ reg = <0x130 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 14>;
+ reset-names = "link";
+ resets = <&sys_rst 14>;
+ };
+
+ usb_hsphy0: hs-phy@200 {
+ compatible = "socionext,uniphier-ld20-usb3-hsphy";
+ reg = <0x200 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 16>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 16>;
+ vbus-supply = <&usb_vbus0>;
+ nvmem-cell-names = "rterm", "sel_t", "hs_i";
+ nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>,
+ <&usb_hs_i0>;
+ };
+
+ usb_hsphy1: hs-phy@210 {
+ compatible = "socionext,uniphier-ld20-usb3-hsphy";
+ reg = <0x210 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 16>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 16>;
+ vbus-supply = <&usb_vbus1>;
+ nvmem-cell-names = "rterm", "sel_t", "hs_i";
+ nvmem-cells = <&usb_rterm1>, <&usb_sel_t1>,
+ <&usb_hs_i0>;
+ };
+
+ usb_hsphy2: hs-phy@220 {
+ compatible = "socionext,uniphier-ld20-usb3-hsphy";
+ reg = <0x220 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 17>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 17>;
+ vbus-supply = <&usb_vbus2>;
+ nvmem-cell-names = "rterm", "sel_t", "hs_i";
+ nvmem-cells = <&usb_rterm2>, <&usb_sel_t2>,
+ <&usb_hs_i2>;
+ };
+
+ usb_hsphy3: hs-phy@230 {
+ compatible = "socionext,uniphier-ld20-usb3-hsphy";
+ reg = <0x230 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 17>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 17>;
+ vbus-supply = <&usb_vbus3>;
+ nvmem-cell-names = "rterm", "sel_t", "hs_i";
+ nvmem-cells = <&usb_rterm3>, <&usb_sel_t3>,
+ <&usb_hs_i2>;
+ };
+
+ usb_ssphy0: ss-phy@300 {
+ compatible = "socionext,uniphier-ld20-usb3-ssphy";
+ reg = <0x300 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 18>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 18>;
+ vbus-supply = <&usb_vbus0>;
+ };
+
+ usb_ssphy1: ss-phy@310 {
+ compatible = "socionext,uniphier-ld20-usb3-ssphy";
+ reg = <0x310 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 19>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 19>;
+ vbus-supply = <&usb_vbus1>;
+ };
+ };
+
+ /* FIXME: U-Boot own node */
usb: usb@65b00000 {
compatible = "socionext,uniphier-ld20-dwc3";
reg = <0x65b00000 0x1000>;
interrupts = <0 65 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
- clocks = <&sys_clk 2>;
+ clock-names = "nand", "nand_x", "ecc";
+ clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
resets = <&sys_rst 2>;
};
};
cache-level = <2>;
};
+ spi: spi@54006000 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006000 0x100>;
+ interrupts = <0 39 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
interrupts = <0 65 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand2cs>;
- clocks = <&sys_clk 2>;
+ clock-names = "nand", "nand_x", "ecc";
+ clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
resets = <&sys_rst 2>;
};
};
function = "sd1";
};
+ pinctrl_spi0: spi0 {
+ groups = "spi0";
+ function = "spi0";
+ };
+
+ pinctrl_spi1: spi1 {
+ groups = "spi1";
+ function = "spi1";
+ };
+
+ pinctrl_spi2: spi2 {
+ groups = "spi2";
+ function = "spi2";
+ };
+
+ pinctrl_spi3: spi3 {
+ groups = "spi3";
+ function = "spi3";
+ };
+
pinctrl_system_bus: system-bus {
groups = "system_bus", "system_bus_cs1";
function = "system_bus";
status = "okay";
};
-&usb0 {
+&usb2 {
status = "okay";
};
-&usb1 {
+&usb3 {
status = "okay";
};
};
};
-&usb2 {
+&usb0 {
status = "okay";
};
-&usb3 {
+&usb1 {
status = "okay";
};
status = "okay";
};
-&usb0 {
+&usb2 {
status = "okay";
};
-&usb1 {
+&usb3 {
status = "okay";
};
};
};
-&usb2 {
+&usb0 {
status = "okay";
};
-&usb3 {
+&usb1 {
status = "okay";
};
cache-level = <2>;
};
+ spi0: spi@54006000 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006000 0x100>;
+ interrupts = <0 39 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
<&mio_clk 12>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
<&mio_rst 12>;
+ phy-names = "usb";
+ phys = <&usb_phy0>;
has-transaction-translator;
};
<&mio_clk 13>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
<&mio_rst 13>;
+ phy-names = "usb";
+ phys = <&usb_phy1>;
has-transaction-translator;
};
pinctrl: pinctrl {
compatible = "socionext,uniphier-pro4-pinctrl";
};
+
+ usb-phy {
+ compatible = "socionext,uniphier-pro4-usb2-phy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb_phy0: phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+
+ usb_phy1: phy@1 {
+ reg = <1>;
+ #phy-cells = <0>;
+ };
+
+ usb_phy2: phy@2 {
+ reg = <2>;
+ #phy-cells = <0>;
+ vbus-supply = <&usb0_vbus>;
+ };
+
+ usb_phy3: phy@3 {
+ reg = <3>;
+ #phy-cells = <0>;
+ vbus-supply = <&usb1_vbus>;
+ };
+ };
};
soc-glue@5f900000 {
};
};
+ _usb0: usb@65a00000 {
+ compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+ status = "disabled";
+ reg = <0x65a00000 0xcd00>;
+ interrupt-names = "host", "peripheral";
+ interrupts = <0 134 4>, <0 135 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0>;
+ clock-names = "ref", "bus_early", "suspend";
+ clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+ resets = <&usb0_rst 4>;
+ phys = <&usb_phy2>, <&usb0_ssphy>;
+ dr_mode = "host";
+ };
+
+ usb-glue@65b00000 {
+ compatible = "socionext,uniphier-pro4-dwc3-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65b00000 0x100>;
+
+ usb0_vbus: regulator@0 {
+ compatible = "socionext,uniphier-pro4-usb3-regulator";
+ reg = <0 0x10>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 14>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 14>;
+ };
+
+ usb0_ssphy: ss-phy@10 {
+ compatible = "socionext,uniphier-pro4-usb3-ssphy";
+ reg = <0x10 0x10>;
+ #phy-cells = <0>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 14>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 14>;
+ vbus-supply = <&usb0_vbus>;
+ };
+
+ usb0_rst: reset@40 {
+ compatible = "socionext,uniphier-pro4-usb3-reset";
+ reg = <0x40 0x4>;
+ #reset-cells = <1>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 14>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 14>;
+ };
+ };
+
+ /* FIXME: U-Boot own node */
usb0: usb@65b00000 {
compatible = "socionext,uniphier-pro4-dwc3";
status = "disabled";
};
};
+ _usb1: usb@65c00000 {
+ compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+ status = "disabled";
+ reg = <0x65c00000 0xcd00>;
+ interrupt-names = "host", "peripheral";
+ interrupts = <0 137 4>, <0 138 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>;
+ clock-names = "ref", "bus_early", "suspend";
+ clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+ resets = <&usb1_rst 4>;
+ phys = <&usb_phy3>;
+ dr_mode = "host";
+ };
+
+ usb-glue@65d00000 {
+ compatible = "socionext,uniphier-pro4-dwc3-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65d00000 0x100>;
+
+ usb1_vbus: regulator@0 {
+ compatible = "socionext,uniphier-pro4-usb3-regulator";
+ reg = <0 0x10>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 15>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 15>;
+ };
+
+ usb1_rst: reset@40 {
+ compatible = "socionext,uniphier-pro4-usb3-reset";
+ reg = <0x40 0x4>;
+ #reset-cells = <1>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 15>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 15>;
+ };
+ };
+
+ /* FIXME: U-Boot own node */
usb1: usb@65d00000 {
compatible = "socionext,uniphier-pro4-dwc3";
status = "disabled";
interrupts = <0 65 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
- clocks = <&sys_clk 2>;
+ clock-names = "nand", "nand_x", "ecc";
+ clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
resets = <&sys_rst 2>;
};
};
cache-level = <3>;
};
+ spi0: spi@54006000 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006000 0x100>;
+ interrupts = <0 39 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
+ spi1: spi@54006100 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006100 0x100>;
+ interrupts = <0 216 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
interrupts = <0 65 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand2cs>;
- clocks = <&sys_clk 2>;
+ clock-names = "nand", "nand_x", "ecc";
+ clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
resets = <&sys_rst 2>;
};
cache-level = <2>;
};
+ spi0: spi@54006000 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006000 0x100>;
+ interrupts = <0 39 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
+ spi1: spi@54006100 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006100 0x100>;
+ interrupts = <0 216 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
};
};
+ _usb0: usb@65a00000 {
+ compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+ status = "disabled";
+ reg = <0x65a00000 0xcd00>;
+ interrupt-names = "host", "peripheral";
+ interrupts = <0 134 4>, <0 135 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>;
+ clock-names = "ref", "bus_early", "suspend";
+ clocks = <&sys_clk 14>, <&sys_clk 14>, <&sys_clk 14>;
+ resets = <&usb0_rst 15>;
+ phys = <&usb0_hsphy0>, <&usb0_hsphy1>,
+ <&usb0_ssphy0>, <&usb0_ssphy1>;
+ dr_mode = "host";
+ };
+
+ usb-glue@65b00000 {
+ compatible = "socionext,uniphier-pxs2-dwc3-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65b00000 0x400>;
+
+ usb0_rst: reset@0 {
+ compatible = "socionext,uniphier-pxs2-usb3-reset";
+ reg = <0x0 0x4>;
+ #reset-cells = <1>;
+ clock-names = "link";
+ clocks = <&sys_clk 14>;
+ reset-names = "link";
+ resets = <&sys_rst 14>;
+ };
+
+ usb0_vbus0: regulator@100 {
+ compatible = "socionext,uniphier-pxs2-usb3-regulator";
+ reg = <0x100 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 14>;
+ reset-names = "link";
+ resets = <&sys_rst 14>;
+ };
+
+ usb0_vbus1: regulator@110 {
+ compatible = "socionext,uniphier-pxs2-usb3-regulator";
+ reg = <0x110 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 14>;
+ reset-names = "link";
+ resets = <&sys_rst 14>;
+ };
+
+ usb0_hsphy0: hs-phy@200 {
+ compatible = "socionext,uniphier-pxs2-usb3-hsphy";
+ reg = <0x200 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 16>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 16>;
+ vbus-supply = <&usb0_vbus0>;
+ };
+
+ usb0_hsphy1: hs-phy@210 {
+ compatible = "socionext,uniphier-pxs2-usb3-hsphy";
+ reg = <0x210 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 16>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 16>;
+ vbus-supply = <&usb0_vbus1>;
+ };
+
+ usb0_ssphy0: ss-phy@300 {
+ compatible = "socionext,uniphier-pxs2-usb3-ssphy";
+ reg = <0x300 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 17>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 17>;
+ vbus-supply = <&usb0_vbus0>;
+ };
+
+ usb0_ssphy1: ss-phy@310 {
+ compatible = "socionext,uniphier-pxs2-usb3-ssphy";
+ reg = <0x310 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 18>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 18>;
+ vbus-supply = <&usb0_vbus1>;
+ };
+ };
+
+ /* FIXME: U-Boot own node */
usb0: usb@65b00000 {
compatible = "socionext,uniphier-pxs2-dwc3";
status = "disabled";
};
};
+ _usb1: usb@65c00000 {
+ compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+ status = "disabled";
+ reg = <0x65c00000 0xcd00>;
+ interrupt-names = "host", "peripheral";
+ interrupts = <0 137 4>, <0 138 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>;
+ clock-names = "ref", "bus_early", "suspend";
+ clocks = <&sys_clk 15>, <&sys_clk 15>, <&sys_clk 15>;
+ resets = <&usb1_rst 15>;
+ phys = <&usb1_hsphy0>, <&usb1_hsphy1>, <&usb1_ssphy0>;
+ dr_mode = "host";
+ };
+
+ usb-glue@65d00000 {
+ compatible = "socionext,uniphier-pxs2-dwc3-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65d00000 0x400>;
+
+ usb1_rst: reset@0 {
+ compatible = "socionext,uniphier-pxs2-usb3-reset";
+ reg = <0x0 0x4>;
+ #reset-cells = <1>;
+ clock-names = "link";
+ clocks = <&sys_clk 15>;
+ reset-names = "link";
+ resets = <&sys_rst 15>;
+ };
+
+ usb1_vbus0: regulator@100 {
+ compatible = "socionext,uniphier-pxs2-usb3-regulator";
+ reg = <0x100 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 15>;
+ reset-names = "link";
+ resets = <&sys_rst 15>;
+ };
+
+ usb1_vbus1: regulator@110 {
+ compatible = "socionext,uniphier-pxs2-usb3-regulator";
+ reg = <0x110 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 15>;
+ reset-names = "link";
+ resets = <&sys_rst 15>;
+ };
+
+ usb1_hsphy0: hs-phy@200 {
+ compatible = "socionext,uniphier-pxs2-usb3-hsphy";
+ reg = <0x200 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 15>, <&sys_clk 20>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 15>, <&sys_rst 20>;
+ vbus-supply = <&usb1_vbus0>;
+ };
+
+ usb1_hsphy1: hs-phy@210 {
+ compatible = "socionext,uniphier-pxs2-usb3-hsphy";
+ reg = <0x210 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 15>, <&sys_clk 20>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 15>, <&sys_rst 20>;
+ vbus-supply = <&usb1_vbus1>;
+ };
+
+ usb1_ssphy0: ss-phy@300 {
+ compatible = "socionext,uniphier-pxs2-usb3-ssphy";
+ reg = <0x300 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 15>, <&sys_clk 21>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 15>, <&sys_rst 21>;
+ vbus-supply = <&usb1_vbus0>;
+ };
+ };
+
+ /* FIXME: U-Boot own node */
usb1: usb@65d00000 {
compatible = "socionext,uniphier-pxs2-dwc3";
status = "disabled";
interrupts = <0 65 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand2cs>;
- clocks = <&sys_clk 2>;
+ clock-names = "nand", "nand_x", "ecc";
+ clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
resets = <&sys_rst 2>;
};
};
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
+ spi0: spi@54006000 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006000 0x100>;
+ interrupts = <0 39 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
+ spi1: spi@54006100 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006100 0x100>;
+ interrupts = <0 216 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
efuse@200 {
compatible = "socionext,uniphier-efuse";
reg = <0x200 0x68>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* USB cells */
+ usb_rterm0: trim@54,4 {
+ reg = <0x54 1>;
+ bits = <4 2>;
+ };
+ usb_rterm1: trim@55,4 {
+ reg = <0x55 1>;
+ bits = <4 2>;
+ };
+ usb_rterm2: trim@58,4 {
+ reg = <0x58 1>;
+ bits = <4 2>;
+ };
+ usb_rterm3: trim@59,4 {
+ reg = <0x59 1>;
+ bits = <4 2>;
+ };
+ usb_sel_t0: trim@54,0 {
+ reg = <0x54 1>;
+ bits = <0 4>;
+ };
+ usb_sel_t1: trim@55,0 {
+ reg = <0x55 1>;
+ bits = <0 4>;
+ };
+ usb_sel_t2: trim@58,0 {
+ reg = <0x58 1>;
+ bits = <0 4>;
+ };
+ usb_sel_t3: trim@59,0 {
+ reg = <0x59 1>;
+ bits = <0 4>;
+ };
+ usb_hs_i0: trim@56,0 {
+ reg = <0x56 1>;
+ bits = <0 4>;
+ };
+ usb_hs_i2: trim@5a,0 {
+ reg = <0x5a 1>;
+ bits = <0 4>;
+ };
};
};
};
};
+ _usb0: usb@65a00000 {
+ compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+ status = "disabled";
+ reg = <0x65a00000 0xcd00>;
+ interrupt-names = "host", "peripheral";
+ interrupts = <0 134 4>, <0 135 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>;
+ clock-names = "ref", "bus_early", "suspend";
+ clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+ resets = <&usb0_rst 15>;
+ phys = <&usb0_hsphy0>, <&usb0_hsphy1>,
+ <&usb0_ssphy0>, <&usb0_ssphy1>;
+ dr_mode = "host";
+ };
+
+ usb-glue@65b00000 {
+ compatible = "socionext,uniphier-pxs3-dwc3-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65b00000 0x400>;
+
+ usb0_rst: reset@0 {
+ compatible = "socionext,uniphier-pxs3-usb3-reset";
+ reg = <0x0 0x4>;
+ #reset-cells = <1>;
+ clock-names = "link";
+ clocks = <&sys_clk 12>;
+ reset-names = "link";
+ resets = <&sys_rst 12>;
+ };
+
+ usb0_vbus0: regulator@100 {
+ compatible = "socionext,uniphier-pxs3-usb3-regulator";
+ reg = <0x100 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 12>;
+ reset-names = "link";
+ resets = <&sys_rst 12>;
+ };
+
+ usb0_vbus1: regulator@110 {
+ compatible = "socionext,uniphier-pxs3-usb3-regulator";
+ reg = <0x110 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 12>;
+ reset-names = "link";
+ resets = <&sys_rst 12>;
+ };
+
+ usb0_hsphy0: hs-phy@200 {
+ compatible = "socionext,uniphier-pxs3-usb3-hsphy";
+ reg = <0x200 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 12>, <&sys_clk 16>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 12>, <&sys_rst 16>;
+ vbus-supply = <&usb0_vbus0>;
+ nvmem-cell-names = "rterm", "sel_t", "hs_i";
+ nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>,
+ <&usb_hs_i0>;
+ };
+
+ usb0_hsphy1: hs-phy@210 {
+ compatible = "socionext,uniphier-pxs3-usb3-hsphy";
+ reg = <0x210 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 12>, <&sys_clk 16>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 12>, <&sys_rst 16>;
+ vbus-supply = <&usb0_vbus1>;
+ nvmem-cell-names = "rterm", "sel_t", "hs_i";
+ nvmem-cells = <&usb_rterm1>, <&usb_sel_t1>,
+ <&usb_hs_i0>;
+ };
+
+ usb0_ssphy0: ss-phy@300 {
+ compatible = "socionext,uniphier-pxs3-usb3-ssphy";
+ reg = <0x300 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 12>, <&sys_clk 17>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 12>, <&sys_rst 17>;
+ vbus-supply = <&usb0_vbus0>;
+ };
+
+ usb0_ssphy1: ss-phy@310 {
+ compatible = "socionext,uniphier-pxs3-usb3-ssphy";
+ reg = <0x310 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 12>, <&sys_clk 18>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 12>, <&sys_rst 18>;
+ vbus-supply = <&usb0_vbus1>;
+ };
+ };
+
+ /* FIXME: U-Boot own node */
usb0: usb@65b00000 {
compatible = "socionext,uniphier-pxs3-dwc3";
status = "disabled";
};
};
+ _usb1: usb@65c00000 {
+ compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+ status = "disabled";
+ reg = <0x65c00000 0xcd00>;
+ interrupt-names = "host", "peripheral";
+ interrupts = <0 137 4>, <0 138 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>;
+ clock-names = "ref", "bus_early", "suspend";
+ clocks = <&sys_clk 13>, <&sys_clk 13>, <&sys_clk 13>;
+ resets = <&usb1_rst 15>;
+ phys = <&usb1_hsphy0>, <&usb1_hsphy1>,
+ <&usb1_ssphy0>;
+ dr_mode = "host";
+ };
+
+ usb-glue@65d00000 {
+ compatible = "socionext,uniphier-pxs3-dwc3-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65d00000 0x400>;
+
+ usb1_rst: reset@0 {
+ compatible = "socionext,uniphier-pxs3-usb3-reset";
+ reg = <0x0 0x4>;
+ #reset-cells = <1>;
+ clock-names = "link";
+ clocks = <&sys_clk 13>;
+ reset-names = "link";
+ resets = <&sys_rst 13>;
+ };
+
+ usb1_vbus0: regulator@100 {
+ compatible = "socionext,uniphier-pxs3-usb3-regulator";
+ reg = <0x100 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 13>;
+ reset-names = "link";
+ resets = <&sys_rst 13>;
+ };
+
+ usb1_vbus1: regulator@110 {
+ compatible = "socionext,uniphier-pxs3-usb3-regulator";
+ reg = <0x110 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 13>;
+ reset-names = "link";
+ resets = <&sys_rst 13>;
+ };
+
+ usb1_hsphy0: hs-phy@200 {
+ compatible = "socionext,uniphier-pxs3-usb3-hsphy";
+ reg = <0x200 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy", "phy-ext";
+ clocks = <&sys_clk 13>, <&sys_clk 20>,
+ <&sys_clk 14>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 13>, <&sys_rst 20>;
+ vbus-supply = <&usb1_vbus0>;
+ nvmem-cell-names = "rterm", "sel_t", "hs_i";
+ nvmem-cells = <&usb_rterm2>, <&usb_sel_t2>,
+ <&usb_hs_i2>;
+ };
+
+ usb1_hsphy1: hs-phy@210 {
+ compatible = "socionext,uniphier-pxs3-usb3-hsphy";
+ reg = <0x210 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy", "phy-ext";
+ clocks = <&sys_clk 13>, <&sys_clk 20>,
+ <&sys_clk 14>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 13>, <&sys_rst 20>;
+ vbus-supply = <&usb1_vbus1>;
+ nvmem-cell-names = "rterm", "sel_t", "hs_i";
+ nvmem-cells = <&usb_rterm3>, <&usb_sel_t3>,
+ <&usb_hs_i2>;
+ };
+
+ usb1_ssphy0: ss-phy@300 {
+ compatible = "socionext,uniphier-pxs3-usb3-ssphy";
+ reg = <0x300 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy", "phy-ext";
+ clocks = <&sys_clk 13>, <&sys_clk 21>,
+ <&sys_clk 14>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 13>, <&sys_rst 21>;
+ vbus-supply = <&usb1_vbus0>;
+ };
+ };
+
+ /* FIXME: U-Boot own node */
usb1: usb@65d00000 {
compatible = "socionext,uniphier-pxs3-dwc3";
status = "disabled";
interrupts = <0 65 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
- clocks = <&sys_clk 2>;
+ clock-names = "nand", "nand_x", "ecc";
+ clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
resets = <&sys_rst 2>;
};
};
cache-level = <2>;
};
+ spi: spi@54006000 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006000 0x100>;
+ interrupts = <0 39 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
interrupts = <0 65 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand2cs>;
- clocks = <&sys_clk 2>;
+ clock-names = "nand", "nand_x", "ecc";
+ clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
resets = <&sys_rst 2>;
};
};
status = "disabled";
};
+ iomuxc: iomuxc@40048000 {
+ compatible = "fsl,vf610-iomuxc";
+ reg = <0x40048000 0x1000>;
+ fsl,mux_mask = <0x700000>;
+ };
+
gpio0: gpio@40049000 {
compatible = "fsl,vf610-gpio";
reg = <0x400ff000 0x40>;
--- /dev/null
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DTS_VF610_PINFUNC_H
+#define __DTS_VF610_PINFUNC_H
+
+/*
+ * The pin function ID for VF610 is a tuple of:
+ * <mux_reg input_reg mux_mode input_val>
+ */
+
+#define ALT0 0x0
+#define ALT1 0x1
+#define ALT2 0x2
+#define ALT3 0x3
+#define ALT4 0x4
+#define ALT5 0x5
+#define ALT6 0x6
+#define ALT7 0x7
+
+
+#define VF610_PAD_PTA6__GPIO_0 0x000 0x000 ALT0 0x0
+#define VF610_PAD_PTA6__RMII_CLKOUT 0x000 0x000 ALT1 0x0
+#define VF610_PAD_PTA6__RMII_CLKIN 0x000 0x2F0 ALT2 0x0
+#define VF610_PAD_PTA6__DCU1_TCON11 0x000 0x000 ALT4 0x0
+#define VF610_PAD_PTA6__DCU1_R2 0x000 0x000 ALT7 0x0
+#define VF610_PAD_PTA8__GPIO_1 0x004 0x000 ALT0 0x0
+#define VF610_PAD_PTA8__TCLK 0x004 0x000 ALT1 0x0
+#define VF610_PAD_PTA8__DCU0_R0 0x004 0x000 ALT4 0x0
+#define VF610_PAD_PTA8__MLB_CLK 0x004 0x354 ALT7 0x0
+#define VF610_PAD_PTA9__GPIO_2 0x008 0x000 ALT0 0x0
+#define VF610_PAD_PTA9__TDI 0x008 0x000 ALT1 0x0
+#define VF610_PAD_PTA9__RMII_CLKOUT 0x008 0x000 ALT2 0x0
+#define VF610_PAD_PTA9__RMII_CLKIN 0x008 0x2F0 ALT3 0x1
+#define VF610_PAD_PTA9__DCU0_R1 0x008 0x000 ALT4 0x0
+#define VF610_PAD_PTA9__WDOG_B 0x008 0x000 ALT6 0x0
+#define VF610_PAD_PTA10__GPIO_3 0x00C 0x000 ALT0 0x0
+#define VF610_PAD_PTA10__TDO 0x00C 0x000 ALT1 0x0
+#define VF610_PAD_PTA10__EXT_AUDIO_MCLK 0x00C 0x2EC ALT2 0x0
+#define VF610_PAD_PTA10__DCU0_G0 0x00C 0x000 ALT4 0x0
+#define VF610_PAD_PTA10__ENET_TS_CLKIN 0x00C 0x2F4 ALT6 0x0
+#define VF610_PAD_PTA10__MLB_SIGNAL 0x00C 0x35C ALT7 0x0
+#define VF610_PAD_PTA11__GPIO_4 0x010 0x000 ALT0 0x0
+#define VF610_PAD_PTA11__TMS 0x010 0x000 ALT1 0x0
+#define VF610_PAD_PTA11__DCU0_G1 0x010 0x000 ALT4 0x0
+#define VF610_PAD_PTA11__MLB_DATA 0x010 0x358 ALT7 0x0
+#define VF610_PAD_PTA12__GPIO_5 0x014 0x000 ALT0 0x0
+#define VF610_PAD_PTA12__TRACECK 0x014 0x000 ALT1 0x0
+#define VF610_PAD_PTA12__EXT_AUDIO_MCLK 0x014 0x2EC ALT2 0x1
+#define VF610_PAD_PTA12__VIU_DATA13 0x014 0x000 ALT6 0x0
+#define VF610_PAD_PTA12__I2C0_SCL 0x014 0x33C ALT7 0x0
+#define VF610_PAD_PTA16__GPIO_6 0x018 0x000 ALT0 0x0
+#define VF610_PAD_PTA16__TRACED0 0x018 0x000 ALT1 0x0
+#define VF610_PAD_PTA16__USB0_VBUS_EN 0x018 0x000 ALT2 0x0
+#define VF610_PAD_PTA16__ADC1_SE0 0x018 0x000 ALT3 0x0
+#define VF610_PAD_PTA16__LCD29 0x018 0x000 ALT4 0x0
+#define VF610_PAD_PTA16__SAI2_TX_BCLK 0x018 0x370 ALT5 0x0
+#define VF610_PAD_PTA16__VIU_DATA14 0x018 0x000 ALT6 0x0
+#define VF610_PAD_PTA16__I2C0_SDA 0x018 0x340 ALT7 0x0
+#define VF610_PAD_PTA17__GPIO_7 0x01C 0x000 ALT0 0x0
+#define VF610_PAD_PTA17__TRACED1 0x01C 0x000 ALT1 0x0
+#define VF610_PAD_PTA17__USB0_VBUS_OC 0x01C 0x000 ALT2 0x0
+#define VF610_PAD_PTA17__ADC1_SE1 0x01C 0x000 ALT3 0x0
+#define VF610_PAD_PTA17__LCD30 0x01C 0x000 ALT4 0x0
+#define VF610_PAD_PTA17__USB0_SOF_PULSE 0x01C 0x000 ALT5 0x0
+#define VF610_PAD_PTA17__VIU_DATA15 0x01C 0x000 ALT6 0x0
+#define VF610_PAD_PTA17__I2C1_SCL 0x01C 0x344 ALT7 0x0
+#define VF610_PAD_PTA18__GPIO_8 0x020 0x000 ALT0 0x0
+#define VF610_PAD_PTA18__TRACED2 0x020 0x000 ALT1 0x0
+#define VF610_PAD_PTA18__ADC0_SE0 0x020 0x000 ALT2 0x0
+#define VF610_PAD_PTA18__FTM1_QD_PHA 0x020 0x334 ALT3 0x0
+#define VF610_PAD_PTA18__LCD31 0x020 0x000 ALT4 0x0
+#define VF610_PAD_PTA18__SAI2_TX_DATA 0x020 0x000 ALT5 0x0
+#define VF610_PAD_PTA18__VIU_DATA16 0x020 0x000 ALT6 0x0
+#define VF610_PAD_PTA18__I2C1_SDA 0x020 0x348 ALT7 0x0
+#define VF610_PAD_PTA19__GPIO_9 0x024 0x000 ALT0 0x0
+#define VF610_PAD_PTA19__TRACED3 0x024 0x000 ALT1 0x0
+#define VF610_PAD_PTA19__ADC0_SE1 0x024 0x000 ALT2 0x0
+#define VF610_PAD_PTA19__FTM1_QD_PHB 0x024 0x338 ALT3 0x0
+#define VF610_PAD_PTA19__LCD32 0x024 0x000 ALT4 0x0
+#define VF610_PAD_PTA19__SAI2_TX_SYNC 0x024 0x000 ALT5 0x0
+#define VF610_PAD_PTA19__VIU_DATA17 0x024 0x000 ALT6 0x0
+#define VF610_PAD_PTA19__QSPI1_A_QSCK 0x024 0x374 ALT7 0x0
+#define VF610_PAD_PTA20__GPIO_10 0x028 0x000 ALT0 0x0
+#define VF610_PAD_PTA20__TRACED4 0x028 0x000 ALT1 0x0
+#define VF610_PAD_PTA20__LCD33 0x028 0x000 ALT4 0x0
+#define VF610_PAD_PTA20__UART3_TX 0x028 0x394 ALT6 0x0
+#define VF610_PAD_PTA20__DCU1_HSYNC 0x028 0x000 ALT7 0x0
+#define VF610_PAD_PTA21__GPIO_11 0x02C 0x000 ALT0 0x0
+#define VF610_PAD_PTA21__TRACED5 0x02C 0x000 ALT1 0x0
+#define VF610_PAD_PTA21__SAI2_RX_BCLK 0x02C 0x364 ALT5 0x0
+#define VF610_PAD_PTA21__UART3_RX 0x02C 0x390 ALT6 0x0
+#define VF610_PAD_PTA21__DCU1_VSYNC 0x02C 0x000 ALT7 0x0
+#define VF610_PAD_PTA22__GPIO_12 0x030 0x000 ALT0 0x0
+#define VF610_PAD_PTA22__TRACED6 0x030 0x000 ALT1 0x0
+#define VF610_PAD_PTA22__SAI2_RX_DATA 0x030 0x368 ALT5 0x0
+#define VF610_PAD_PTA22__I2C2_SCL 0x030 0x34C ALT6 0x0
+#define VF610_PAD_PTA22__DCU1_TAG 0x030 0x000 ALT7 0x0
+#define VF610_PAD_PTA23__GPIO_13 0x034 0x000 ALT0 0x0
+#define VF610_PAD_PTA23__TRACED7 0x034 0x000 ALT1 0x0
+#define VF610_PAD_PTA23__SAI2_RX_SYNC 0x034 0x36C ALT5 0x0
+#define VF610_PAD_PTA23__I2C2_SDA 0x034 0x350 ALT6 0x0
+#define VF610_PAD_PTA23__DCU1_DE 0x034 0x000 ALT7 0x0
+#define VF610_PAD_PTA24__GPIO_14 0x038 0x000 ALT0 0x0
+#define VF610_PAD_PTA24__TRACED8 0x038 0x000 ALT1 0x0
+#define VF610_PAD_PTA24__USB1_VBUS_EN 0x038 0x000 ALT2 0x0
+#define VF610_PAD_PTA24__ESDHC1_CLK 0x038 0x000 ALT5 0x0
+#define VF610_PAD_PTA24__DCU1_TCON4 0x038 0x000 ALT6 0x0
+#define VF610_PAD_PTA24__DDR_TEST_PAD_CTRL 0x038 0x000 ALT7 0x0
+#define VF610_PAD_PTA25__GPIO_15 0x03C 0x000 ALT0 0x0
+#define VF610_PAD_PTA25__TRACED9 0x03C 0x000 ALT1 0x0
+#define VF610_PAD_PTA25__USB1_VBUS_OC 0x03C 0x000 ALT2 0x0
+#define VF610_PAD_PTA25__ESDHC1_CMD 0x03C 0x000 ALT5 0x0
+#define VF610_PAD_PTA25__DCU1_TCON5 0x03C 0x000 ALT6 0x0
+#define VF610_PAD_PTA26__GPIO_16 0x040 0x000 ALT0 0x0
+#define VF610_PAD_PTA26__TRACED10 0x040 0x000 ALT1 0x0
+#define VF610_PAD_PTA26__SAI3_TX_BCLK 0x040 0x000 ALT2 0x0
+#define VF610_PAD_PTA26__ESDHC1_DAT0 0x040 0x000 ALT5 0x0
+#define VF610_PAD_PTA26__DCU1_TCON6 0x040 0x000 ALT6 0x0
+#define VF610_PAD_PTA27__GPIO_17 0x044 0x000 ALT0 0x0
+#define VF610_PAD_PTA27__TRACED11 0x044 0x000 ALT1 0x0
+#define VF610_PAD_PTA27__SAI3_RX_BCLK 0x044 0x000 ALT2 0x0
+#define VF610_PAD_PTA27__ESDHC1_DAT1 0x044 0x000 ALT5 0x0
+#define VF610_PAD_PTA27__DCU1_TCON7 0x044 0x000 ALT6 0x0
+#define VF610_PAD_PTA28__GPIO_18 0x048 0x000 ALT0 0x0
+#define VF610_PAD_PTA28__TRACED12 0x048 0x000 ALT1 0x0
+#define VF610_PAD_PTA28__SAI3_RX_DATA 0x048 0x000 ALT2 0x0
+#define VF610_PAD_PTA28__ENET1_1588_TMR0 0x048 0x000 ALT3 0x0
+#define VF610_PAD_PTA28__UART4_TX 0x048 0x000 ALT4 0x0
+#define VF610_PAD_PTA28__ESDHC1_DATA2 0x048 0x000 ALT5 0x0
+#define VF610_PAD_PTA28__DCU1_TCON8 0x048 0x000 ALT6 0x0
+#define VF610_PAD_PTA29__GPIO_19 0x04C 0x000 ALT0 0x0
+#define VF610_PAD_PTA29__TRACED13 0x04C 0x000 ALT1 0x0
+#define VF610_PAD_PTA29__SAI3_TX_DATA 0x04C 0x000 ALT2 0x0
+#define VF610_PAD_PTA29__ENET1_1588_TMR1 0x04C 0x000 ALT3 0x0
+#define VF610_PAD_PTA29__UART4_RX 0x04C 0x000 ALT4 0x0
+#define VF610_PAD_PTA29__ESDHC1_DAT3 0x04C 0x000 ALT5 0x0
+#define VF610_PAD_PTA29__DCU1_TCON9 0x04C 0x000 ALT6 0x0
+#define VF610_PAD_PTA30__GPIO_20 0x050 0x000 ALT0 0x0
+#define VF610_PAD_PTA30__TRACED14 0x050 0x000 ALT1 0x0
+#define VF610_PAD_PTA30__SAI3_RX_SYNC 0x050 0x000 ALT2 0x0
+#define VF610_PAD_PTA30__ENET1_1588_TMR2 0x050 0x000 ALT3 0x0
+#define VF610_PAD_PTA30__UART4_RTS 0x050 0x000 ALT4 0x0
+#define VF610_PAD_PTA30__I2C3_SCL 0x050 0x000 ALT5 0x0
+#define VF610_PAD_PTA30__UART3_TX 0x050 0x394 ALT7 0x1
+#define VF610_PAD_PTA31__GPIO_21 0x054 0x000 ALT0 0x0
+#define VF610_PAD_PTA31__TRACED15 0x054 0x000 ALT1 0x0
+#define VF610_PAD_PTA31__SAI3_TX_SYNC 0x054 0x000 ALT2 0x0
+#define VF610_PAD_PTA31__ENET1_1588_TMR3 0x054 0x000 ALT3 0x0
+#define VF610_PAD_PTA31__UART4_CTS 0x054 0x000 ALT4 0x0
+#define VF610_PAD_PTA31__I2C3_SDA 0x054 0x000 ALT5 0x0
+#define VF610_PAD_PTA31__UART3_RX 0x054 0x390 ALT7 0x1
+#define VF610_PAD_PTB0__GPIO_22 0x058 0x000 ALT0 0x0
+#define VF610_PAD_PTB0__FTM0_CH0 0x058 0x000 ALT1 0x0
+#define VF610_PAD_PTB0__ADC0_SE2 0x058 0x000 ALT2 0x0
+#define VF610_PAD_PTB0__TRACE_CTL 0x058 0x000 ALT3 0x0
+#define VF610_PAD_PTB0__LCD34 0x058 0x000 ALT4 0x0
+#define VF610_PAD_PTB0__SAI2_RX_BCLK 0x058 0x364 ALT5 0x1
+#define VF610_PAD_PTB0__VIU_DATA18 0x058 0x000 ALT6 0x0
+#define VF610_PAD_PTB0__QSPI1_A_QPCS0 0x058 0x000 ALT7 0x0
+#define VF610_PAD_PTB1__GPIO_23 0x05C 0x000 ALT0 0x0
+#define VF610_PAD_PTB1__FTM0_CH1 0x05C 0x000 ALT1 0x0
+#define VF610_PAD_PTB1__ADC0_SE3 0x05C 0x000 ALT2 0x0
+#define VF610_PAD_PTB1__SRC_RCON30 0x05C 0x000 ALT3 0x0
+#define VF610_PAD_PTB1__LCD35 0x05C 0x000 ALT4 0x0
+#define VF610_PAD_PTB1__SAI2_RX_DATA 0x05C 0x368 ALT5 0x1
+#define VF610_PAD_PTB1__VIU_DATA19 0x05C 0x000 ALT6 0x0
+#define VF610_PAD_PTB1__QSPI1_A_DATA3 0x05C 0x000 ALT7 0x0
+#define VF610_PAD_PTB2__GPIO_24 0x060 0x000 ALT0 0x0
+#define VF610_PAD_PTB2__FTM0_CH2 0x060 0x000 ALT1 0x0
+#define VF610_PAD_PTB2__ADC1_SE2 0x060 0x000 ALT2 0x0
+#define VF610_PAD_PTB2__SRC_RCON31 0x060 0x000 ALT3 0x0
+#define VF610_PAD_PTB2__LCD36 0x060 0x000 ALT4 0x0
+#define VF610_PAD_PTB2__SAI2_RX_SYNC 0x060 0x36C ALT5 0x1
+#define VF610_PAD_PTB2__VIDEO_IN0_DATA20 0x060 0x000 ALT6 0x0
+#define VF610_PAD_PTB2__QSPI1_A_DATA2 0x060 0x000 ALT7 0x0
+#define VF610_PAD_PTB3__GPIO_25 0x064 0x000 ALT0 0x0
+#define VF610_PAD_PTB3__FTM0_CH3 0x064 0x000 ALT1 0x0
+#define VF610_PAD_PTB3__ADC1_SE3 0x064 0x000 ALT2 0x0
+#define VF610_PAD_PTB3__PDB_EXTRIG 0x064 0x000 ALT3 0x0
+#define VF610_PAD_PTB3__LCD37 0x064 0x000 ALT4 0x0
+#define VF610_PAD_PTB3__VIU_DATA21 0x064 0x000 ALT6 0x0
+#define VF610_PAD_PTB3__QSPI1_A_DATA1 0x064 0x000 ALT7 0x0
+#define VF610_PAD_PTB4__GPIO_26 0x068 0x000 ALT0 0x0
+#define VF610_PAD_PTB4__FTM0_CH4 0x068 0x000 ALT1 0x0
+#define VF610_PAD_PTB4__UART1_TX 0x068 0x380 ALT2 0x0
+#define VF610_PAD_PTB4__ADC0_SE4 0x068 0x000 ALT3 0x0
+#define VF610_PAD_PTB4__LCD38 0x068 0x000 ALT4 0x0
+#define VF610_PAD_PTB4__VIU_FID 0x068 0x3A8 ALT5 0x0
+#define VF610_PAD_PTB4__VIU_DATA22 0x068 0x000 ALT6 0x0
+#define VF610_PAD_PTB4__QSPI1_A_DATA0 0x068 0x000 ALT7 0x0
+#define VF610_PAD_PTB5__GPIO_27 0x06C 0x000 ALT0 0x0
+#define VF610_PAD_PTB5__FTM0_CH5 0x06C 0x000 ALT1 0x0
+#define VF610_PAD_PTB5__UART1_RX 0x06C 0x37C ALT2 0x0
+#define VF610_PAD_PTB5__ADC1_SE4 0x06C 0x000 ALT3 0x0
+#define VF610_PAD_PTB5__LCD39 0x06C 0x000 ALT4 0x0
+#define VF610_PAD_PTB5__VIU_DE 0x06C 0x3A4 ALT5 0x0
+#define VF610_PAD_PTB5__QSPI1_A_DQS 0x06C 0x000 ALT7 0x0
+#define VF610_PAD_PTB6__GPIO_28 0x070 0x000 ALT0 0x0
+#define VF610_PAD_PTB6__FTM0_CH6 0x070 0x000 ALT1 0x0
+#define VF610_PAD_PTB6__UART1_RTS 0x070 0x000 ALT2 0x0
+#define VF610_PAD_PTB6__QSPI0_QPCS1_A 0x070 0x000 ALT3 0x0
+#define VF610_PAD_PTB6__LCD_LCD40 0x070 0x000 ALT4 0x0
+#define VF610_PAD_PTB6__FB_CLKOUT 0x070 0x000 ALT5 0x0
+#define VF610_PAD_PTB6__VIU_HSYNC 0x070 0x000 ALT6 0x0
+#define VF610_PAD_PTB6__UART2_TX 0x070 0x38C ALT7 0x0
+#define VF610_PAD_PTB7__GPIO_29 0x074 0x000 ALT0 0x0
+#define VF610_PAD_PTB7__FTM0_CH7 0x074 0x000 ALT1 0x0
+#define VF610_PAD_PTB7__UART1_CTS 0x074 0x378 ALT2 0x0
+#define VF610_PAD_PTB7__QSPI0_B_QPCS1 0x074 0x000 ALT3 0x0
+#define VF610_PAD_PTB7__LCD41 0x074 0x000 ALT4 0x0
+#define VF610_PAD_PTB7__VIU_VSYNC 0x074 0x000 ALT6 0x0
+#define VF610_PAD_PTB7__UART2_RX 0x074 0x388 ALT7 0x0
+#define VF610_PAD_PTB8__GPIO_30 0x078 0x000 ALT0 0x0
+#define VF610_PAD_PTB8__FTM1_CH0 0x078 0x32C ALT1 0x0
+#define VF610_PAD_PTB8__FTM1_QD_PHA 0x078 0x334 ALT3 0x1
+#define VF610_PAD_PTB8__VIU_DE 0x078 0x3A4 ALT5 0x1
+#define VF610_PAD_PTB8__DCU1_R6 0x078 0x000 ALT7 0x0
+#define VF610_PAD_PTB9__GPIO_31 0x07C 0x000 ALT0 0x0
+#define VF610_PAD_PTB9__FTM1_CH1 0x07C 0x330 ALT1 0x0
+#define VF610_PAD_PTB9__FTM1_QD_PHB 0x07C 0x338 ALT3 0x1
+#define VF610_PAD_PTB9__DCU1_R7 0x07C 0x000 ALT7 0x0
+#define VF610_PAD_PTB10__GPIO_32 0x080 0x000 ALT0 0x0
+#define VF610_PAD_PTB10__UART0_TX 0x080 0x000 ALT1 0x0
+#define VF610_PAD_PTB10__DCU0_TCON4 0x080 0x000 ALT4 0x0
+#define VF610_PAD_PTB10__VIU_DE 0x080 0x3A4 ALT5 0x2
+#define VF610_PAD_PTB10__CKO1 0x080 0x000 ALT6 0x0
+#define VF610_PAD_PTB10__ENET_TS_CLKIN 0x080 0x2F4 ALT7 0x1
+#define VF610_PAD_PTB11__GPIO_33 0x084 0x000 ALT0 0x0
+#define VF610_PAD_PTB11__UART0_RX 0x084 0x000 ALT1 0x0
+#define VF610_PAD_PTB11__DCU0_TCON5 0x084 0x000 ALT4 0x0
+#define VF610_PAD_PTB11__SNVS_ALARM_OUT_B 0x084 0x000 ALT5 0x0
+#define VF610_PAD_PTB11__CKO2 0x084 0x000 ALT6 0x0
+#define VF610_PAD_PTB11_ENET0_1588_TMR0 0x084 0x304 ALT7 0x0
+#define VF610_PAD_PTB12__GPIO_34 0x088 0x000 ALT0 0x0
+#define VF610_PAD_PTB12__UART0_RTS 0x088 0x000 ALT1 0x0
+#define VF610_PAD_PTB12__DSPI0_CS5 0x088 0x000 ALT3 0x0
+#define VF610_PAD_PTB12__DCU0_TCON6 0x088 0x000 ALT4 0x0
+#define VF610_PAD_PTB12__FB_AD1 0x088 0x000 ALT5 0x0
+#define VF610_PAD_PTB12__NMI 0x088 0x000 ALT6 0x0
+#define VF610_PAD_PTB12__ENET0_1588_TMR1 0x088 0x308 ALT7 0x0
+#define VF610_PAD_PTB13__GPIO_35 0x08C 0x000 ALT0 0x0
+#define VF610_PAD_PTB13__UART0_CTS 0x08C 0x000 ALT1 0x0
+#define VF610_PAD_PTB13__DSPI0_CS4 0x08C 0x000 ALT3 0x0
+#define VF610_PAD_PTB13__DCU0_TCON7 0x08C 0x000 ALT4 0x0
+#define VF610_PAD_PTB13__FB_AD0 0x08C 0x000 ALT5 0x0
+#define VF610_PAD_PTB13__TRACE_CTL 0x08C 0x000 ALT6 0x0
+#define VF610_PAD_PTB14__GPIO_36 0x090 0x000 ALT0 0x0
+#define VF610_PAD_PTB14__CAN0_RX 0x090 0x000 ALT1 0x0
+#define VF610_PAD_PTB14__I2C0_SCL 0x090 0x33C ALT2 0x1
+#define VF610_PAD_PTB14__DCU0_TCON8 0x090 0x000 ALT4 0x0
+#define VF610_PAD_PTB14__DCU1_PCLK 0x090 0x000 ALT7 0x0
+#define VF610_PAD_PTB15__GPIO_37 0x094 0x000 ALT0 0x0
+#define VF610_PAD_PTB15__CAN0_TX 0x094 0x000 ALT1 0x0
+#define VF610_PAD_PTB15__I2C0_SDA 0x094 0x340 ALT2 0x1
+#define VF610_PAD_PTB15__DCU0_TCON9 0x094 0x000 ALT4 0x0
+#define VF610_PAD_PTB15__VIU_PIX_CLK 0x094 0x3AC ALT7 0x0
+#define VF610_PAD_PTB16__GPIO_38 0x098 0x000 ALT0 0x0
+#define VF610_PAD_PTB16__CAN1_RX 0x098 0x000 ALT1 0x0
+#define VF610_PAD_PTB16__I2C1_SCL 0x098 0x344 ALT2 0x1
+#define VF610_PAD_PTB16__DCU0_TCON10 0x098 0x000 ALT4 0x0
+#define VF610_PAD_PTB17__GPIO_39 0x09C 0x000 ALT0 0x0
+#define VF610_PAD_PTB17__CAN1_TX 0x09C 0x000 ALT1 0x0
+#define VF610_PAD_PTB17__I2C1_SDA 0x09C 0x348 ALT2 0x1
+#define VF610_PAD_PTB17__DCU0_TCON11 0x09C 0x000 ALT4 0x0
+#define VF610_PAD_PTB18__GPIO_40 0x0A0 0x000 ALT0 0x0
+#define VF610_PAD_PTB18__DSPI0_CS1 0x0A0 0x000 ALT1 0x0
+#define VF610_PAD_PTB18__EXT_AUDIO_MCLK 0x0A0 0x2EC ALT2 0x2
+#define VF610_PAD_PTB18__VIU_DATA9 0x0A0 0x000 ALT6 0x0
+#define VF610_PAD_PTB19__GPIO_41 0x0A4 0x000 ALT0 0x0
+#define VF610_PAD_PTB19__DSPI0_CS0 0x0A4 0x000 ALT1 0x0
+#define VF610_PAD_PTB19__VIU_DATA10 0x0A4 0x000 ALT6 0x0
+#define VF610_PAD_PTB20__GPIO_42 0x0A8 0x000 ALT0 0x0
+#define VF610_PAD_PTB20__DSPI0_SIN 0x0A8 0x000 ALT1 0x0
+#define VF610_PAD_PTB20__LCD42 0x0A8 0x000 ALT4 0x0
+#define VF610_PAD_PTB20__VIU_DATA11 0x0A8 0x000 ALT6 0x0
+#define VF610_PAD_PTB21__GPIO_43 0x0AC 0x000 ALT0 0x0
+#define VF610_PAD_PTB21__DSPI0_SOUT 0x0AC 0x000 ALT1 0x0
+#define VF610_PAD_PTB21__LCD43 0x0AC 0x000 ALT4 0x0
+#define VF610_PAD_PTB21__VIU_DATA12 0x0AC 0x000 ALT6 0x0
+#define VF610_PAD_PTB21__DCU1_PCLK 0x0AC 0x000 ALT7 0x0
+#define VF610_PAD_PTB22__GPIO_44 0x0B0 0x000 ALT0 0x0
+#define VF610_PAD_PTB22__DSPI0_SCK 0x0B0 0x000 ALT1 0x0
+#define VF610_PAD_PTB22__VLCD 0x0B0 0x000 ALT4 0x0
+#define VF610_PAD_PTB22__VIU_FID 0x0B0 0x3A8 ALT5 0x1
+#define VF610_PAD_PTC0__GPIO_45 0x0B4 0x000 ALT0 0x0
+#define VF610_PAD_PTC0__ENET_RMII0_MDC 0x0B4 0x000 ALT1 0x0
+#define VF610_PAD_PTC0__FTM1_CH0 0x0B4 0x32C ALT2 0x1
+#define VF610_PAD_PTC0__DSPI0_CS3 0x0B4 0x000 ALT3 0x0
+#define VF610_PAD_PTC0__ESAI_SCKT 0x0B4 0x310 ALT4 0x0
+#define VF610_PAD_PTC0__ESDHC0_CLK 0x0B4 0x000 ALT5 0x0
+#define VF610_PAD_PTC0__VIU_DATA0 0x0B4 0x000 ALT6 0x0
+#define VF610_PAD_PTC0__SRC_RCON18 0x0B4 0x398 ALT7 0x0
+#define VF610_PAD_PTC1__GPIO_46 0x0B8 0x000 ALT0 0x0
+#define VF610_PAD_PTC1__ENET_RMII0_MDIO 0x0B8 0x000 ALT1 0x0
+#define VF610_PAD_PTC1__FTM1_CH1 0x0B8 0x330 ALT2 0x1
+#define VF610_PAD_PTC1__DSPI0_CS2 0x0B8 0x000 ALT3 0x0
+#define VF610_PAD_PTC1__ESAI_FST 0x0B8 0x30C ALT4 0x0
+#define VF610_PAD_PTC1__ESDHC0_CMD 0x0B8 0x000 ALT5 0x0
+#define VF610_PAD_PTC1__VIU_DATA1 0x0B8 0x000 ALT6 0x0
+#define VF610_PAD_PTC1__SRC_RCON19 0x0B8 0x39C ALT7 0x0
+#define VF610_PAD_PTC2__GPIO_47 0x0BC 0x000 ALT0 0x0
+#define VF610_PAD_PTC2__ENET_RMII0_CRS 0x0BC 0x000 ALT1 0x0
+#define VF610_PAD_PTC2__UART1_TX 0x0BC 0x380 ALT2 0x1
+#define VF610_PAD_PTC2__ESAI_SDO0 0x0BC 0x314 ALT4 0x0
+#define VF610_PAD_PTC2__ESDHC0_DAT0 0x0BC 0x000 ALT5 0x0
+#define VF610_PAD_PTC2__VIU_DATA2 0x0BC 0x000 ALT6 0x0
+#define VF610_PAD_PTC2__SRC_RCON20 0x0BC 0x3A0 ALT7 0x0
+#define VF610_PAD_PTC3__GPIO_48 0x0C0 0x000 ALT0 0x0
+#define VF610_PAD_PTC3__ENET_RMII0_RXD1 0x0C0 0x000 ALT1 0x0
+#define VF610_PAD_PTC3__UART1_RX 0x0C0 0x37C ALT2 0x1
+#define VF610_PAD_PTC3__ESAI_SDO1 0x0C0 0x318 ALT4 0x0
+#define VF610_PAD_PTC3__ESDHC0_DAT1 0x0C0 0x000 ALT5 0x0
+#define VF610_PAD_PTC3__VIU_DATA3 0x0C0 0x000 ALT6 0x0
+#define VF610_PAD_PTC3__DCU0_R0 0x0C0 0x000 ALT7 0x0
+#define VF610_PAD_PTC4__GPIO_49 0x0C4 0x000 ALT0 0x0
+#define VF610_PAD_PTC4__ENET_RMII0_RXD0 0x0C4 0x000 ALT1 0x0
+#define VF610_PAD_PTC4__UART1_RTS 0x0C4 0x000 ALT2 0x0
+#define VF610_PAD_PTC4__DSPI1_CS1 0x0C4 0x000 ALT3 0x0
+#define VF610_PAD_PTC4__ESAI_SDO2 0x0C4 0x31C ALT4 0x0
+#define VF610_PAD_PTC4__ESDHC0_DAT2 0x0C4 0x000 ALT5 0x0
+#define VF610_PAD_PTC4__VIU_DATA4 0x0C4 0x000 ALT6 0x0
+#define VF610_PAD_PTC4__DCU0_R1 0x0C4 0x000 ALT7 0x0
+#define VF610_PAD_PTC5__GPIO_50 0x0C8 0x000 ALT0 0x0
+#define VF610_PAD_PTC5__ENET_RMII0_RXER 0x0C8 0x000 ALT1 0x0
+#define VF610_PAD_PTC5__UART1_CTS 0x0C8 0x378 ALT2 0x1
+#define VF610_PAD_PTC5__DSPI1_CS0 0x0C8 0x300 ALT3 0x0
+#define VF610_PAD_PTC5__ESAI_SDO3 0x0C8 0x320 ALT4 0x0
+#define VF610_PAD_PTC5__ESDHC0_DAT3 0x0C8 0x000 ALT5 0x0
+#define VF610_PAD_PTC5__VIU_DATA5 0x0C8 0x000 ALT6 0x0
+#define VF610_PAD_PTC5__DCU0_G0 0x0C8 0x000 ALT7 0x0
+#define VF610_PAD_PTC6__GPIO_51 0x0CC 0x000 ALT0 0x0
+#define VF610_PAD_PTC6__ENET_RMII0_TXD1 0x0CC 0x000 ALT1 0x0
+#define VF610_PAD_PTC6__DSPI1_SIN 0x0CC 0x2FC ALT3 0x0
+#define VF610_PAD_PTC6__ESAI_SDI0 0x0CC 0x328 ALT4 0x0
+#define VF610_PAD_PTC6__ESDHC0_WP 0x0CC 0x000 ALT5 0x0
+#define VF610_PAD_PTC6__VIU_DATA6 0x0CC 0x000 ALT6 0x0
+#define VF610_PAD_PTC6__DCU0_G1 0x0CC 0x000 ALT7 0x0
+#define VF610_PAD_PTC7__GPIO_52 0x0D0 0x000 ALT0 0x0
+#define VF610_PAD_PTC7__ENET_RMII0_TXD0 0x0D0 0x000 ALT1 0x0
+#define VF610_PAD_PTC7__DSPI1_SOUT 0x0D0 0x000 ALT3 0x0
+#define VF610_PAD_PTC7__ESAI_SDI1 0x0D0 0x324 ALT4 0x0
+#define VF610_PAD_PTC7__VIU_DATA7 0x0D0 0x000 ALT6 0x0
+#define VF610_PAD_PTC7__DCU0_B0 0x0D0 0x000 ALT7 0x0
+#define VF610_PAD_PTC8__GPIO_53 0x0D4 0x000 ALT0 0x0
+#define VF610_PAD_PTC8__ENET_RMII0_TXEN 0x0D4 0x000 ALT1 0x0
+#define VF610_PAD_PTC8__DSPI1_SCK 0x0D4 0x2F8 ALT3 0x0
+#define VF610_PAD_PTC8__VIU_DATA8 0x0D4 0x000 ALT6 0x0
+#define VF610_PAD_PTC8__DCU0_B1 0x0D4 0x000 ALT7 0x0
+#define VF610_PAD_PTC9__GPIO_54 0x0D8 0x000 ALT0 0x0
+#define VF610_PAD_PTC9__ENET_RMII1_MDC 0x0D8 0x000 ALT1 0x0
+#define VF610_PAD_PTC9__ESAI_SCKT 0x0D8 0x310 ALT3 0x1
+#define VF610_PAD_PTC9__MLB_CLK 0x0D8 0x354 ALT6 0x1
+#define VF610_PAD_PTC9__DEBUG_OUT0 0x0D8 0x000 ALT7 0x0
+#define VF610_PAD_PTC10__GPIO_55 0x0DC 0x000 ALT0 0x0
+#define VF610_PAD_PTC10__ENET_RMII1_MDIO 0x0DC 0x000 ALT1 0x0
+#define VF610_PAD_PTC10__ESAI_FST 0x0DC 0x30C ALT3 0x1
+#define VF610_PAD_PTC10__MLB_SIGNAL 0x0DC 0x35C ALT6 0x1
+#define VF610_PAD_PTC10__DEBUG_OUT1 0x0DC 0x000 ALT7 0x0
+#define VF610_PAD_PTC11__GPIO_56 0x0E0 0x000 ALT0 0x0
+#define VF610_PAD_PTC11__ENET_RMII1_CRS 0x0E0 0x000 ALT1 0x0
+#define VF610_PAD_PTC11__ESAI_SDO0 0x0E0 0x314 ALT3 0x1
+#define VF610_PAD_PTC11__MLB_DATA 0x0E0 0x358 ALT6 0x1
+#define VF610_PAD_PTC11__DEBUG_OUT 0x0E0 0x000 ALT7 0x0
+#define VF610_PAD_PTC12__GPIO_57 0x0E4 0x000 ALT0 0x0
+#define VF610_PAD_PTC12__ENET_RMII1_RXD1 0x0E4 0x000 ALT1 0x0
+#define VF610_PAD_PTC12__ESAI_SDO1 0x0E4 0x318 ALT3 0x1
+#define VF610_PAD_PTC12__SAI2_TX_BCLK 0x0E4 0x370 ALT5 0x1
+#define VF610_PAD_PTC12__DEBUG_OUT3 0x0E4 0x000 ALT7 0x0
+#define VF610_PAD_PTC13__GPIO_58 0x0E8 0x000 ALT0 0x0
+#define VF610_PAD_PTC13__ENET_RMII1_RXD0 0x0E8 0x000 ALT1 0x0
+#define VF610_PAD_PTC13__ESAI_SDO2 0x0E8 0x31C ALT3 0x1
+#define VF610_PAD_PTC13__SAI2_RX_BCLK 0x0E8 0x364 ALT5 0x2
+#define VF610_PAD_PTC13__DEBUG_OUT4 0x0E8 0x000 ALT7 0x0
+#define VF610_PAD_PTC14__GPIO_59 0x0EC 0x000 ALT0 0x0
+#define VF610_PAD_PTC14__ENET_RMII1_RXER 0x0EC 0x000 ALT1 0x0
+#define VF610_PAD_PTC14__ESAI_SDO3 0x0EC 0x320 ALT3 0x1
+#define VF610_PAD_PTC14__UART5_TX 0x0EC 0x000 ALT4 0x0
+#define VF610_PAD_PTC14__SAI2_RX_DATA 0x0EC 0x368 ALT5 0x2
+#define VF610_PAD_PTC14__ADC0_SE6 0x0EC 0x000 ALT6 0x0
+#define VF610_PAD_PTC14__DEBUG_OUT5 0x0EC 0x000 ALT7 0x0
+#define VF610_PAD_PTC15__GPIO_60 0x0F0 0x000 ALT0 0x0
+#define VF610_PAD_PTC15__ENET_RMII1_TXD1 0x0F0 0x000 ALT1 0x0
+#define VF610_PAD_PTC15__ESAI_SDI0 0x0F0 0x328 ALT3 0x1
+#define VF610_PAD_PTC15__UART5_RX 0x0F0 0x000 ALT4 0x0
+#define VF610_PAD_PTC15__SAI2_TX_DATA 0x0F0 0x000 ALT5 0x0
+#define VF610_PAD_PTC15__ADC0_SE7 0x0F0 0x000 ALT6 0x0
+#define VF610_PAD_PTC15__DEBUG_OUT6 0x0F0 0x000 ALT7 0x0
+#define VF610_PAD_PTC16__GPIO_61 0x0F4 0x000 ALT0 0x0
+#define VF610_PAD_PTC16__ENET_RMII1_TXD0 0x0F4 0x000 ALT1 0x0
+#define VF610_PAD_PTC16__ESAI_SDI1 0x0F4 0x324 ALT3 0x1
+#define VF610_PAD_PTC16__UART5_RTS 0x0F4 0x000 ALT4 0x0
+#define VF610_PAD_PTC16__SAI2_RX_SYNC 0x0F4 0x36C ALT5 0x2
+#define VF610_PAD_PTC16__ADC1_SE6 0x0F4 0x000 ALT6 0x0
+#define VF610_PAD_PTC16__DEBUG_OUT7 0x0F4 0x000 ALT7 0x0
+#define VF610_PAD_PTC17__GPIO_62 0x0F8 0x000 ALT0 0x0
+#define VF610_PAD_PTC17__ENET_RMII1_TXEN 0x0F8 0x000 ALT1 0x0
+#define VF610_PAD_PTC17__ADC1_SE7 0x0F8 0x000 ALT3 0x0
+#define VF610_PAD_PTC17__UART5_CTS 0x0F8 0x000 ALT4 0x0
+#define VF610_PAD_PTC17__SAI2_TX_SYNC 0x0F8 0x374 ALT5 0x1
+#define VF610_PAD_PTC17__USB1_SOF_PULSE 0x0F8 0x000 ALT6 0x0
+#define VF610_PAD_PTC17__DEBUG_OUT8 0x0F8 0x000 ALT7 0x0
+#define VF610_PAD_PTD31__GPIO_63 0x0FC 0x000 ALT0 0x0
+#define VF610_PAD_PTD31__FB_AD31 0x0FC 0x000 ALT1 0x0
+#define VF610_PAD_PTD31__NF_IO15 0x0FC 0x000 ALT2 0x0
+#define VF610_PAD_PTD31__FTM3_CH0 0x0FC 0x000 ALT4 0x0
+#define VF610_PAD_PTD31__DSPI2_CS1 0x0FC 0x000 ALT5 0x0
+#define VF610_PAD_PTD31__DEBUG_OUT9 0x0FC 0x000 ALT7 0x0
+#define VF610_PAD_PTD30__GPIO_64 0x100 0x000 ALT0 0x0
+#define VF610_PAD_PTD30__FB_AD30 0x100 0x000 ALT1 0x0
+#define VF610_PAD_PTD30__NF_IO14 0x100 0x000 ALT2 0x0
+#define VF610_PAD_PTD30__FTM3_CH1 0x100 0x000 ALT4 0x0
+#define VF610_PAD_PTD30__DSPI2_CS0 0x100 0x000 ALT5 0x0
+#define VF610_PAD_PTD30__DEBUG_OUT10 0x100 0x000 ALT7 0x0
+#define VF610_PAD_PTD29__GPIO_65 0x104 0x000 ALT0 0x0
+#define VF610_PAD_PTD29__FB_AD29 0x104 0x000 ALT1 0x0
+#define VF610_PAD_PTD29__NF_IO13 0x104 0x000 ALT2 0x0
+#define VF610_PAD_PTD29__FTM3_CH2 0x104 0x000 ALT4 0x0
+#define VF610_PAD_PTD29__DSPI2_SIN 0x104 0x000 ALT5 0x0
+#define VF610_PAD_PTD29__DEBUG_OUT11 0x104 0x000 ALT7 0x0
+#define VF610_PAD_PTD28__GPIO_66 0x108 0x000 ALT0 0x0
+#define VF610_PAD_PTD28__FB_AD28 0x108 0x000 ALT1 0x0
+#define VF610_PAD_PTD28__NF_IO12 0x108 0x000 ALT2 0x0
+#define VF610_PAD_PTD28__I2C2_SCL 0x108 0x34C ALT3 0x1
+#define VF610_PAD_PTD28__FTM3_CH3 0x108 0x000 ALT4 0x0
+#define VF610_PAD_PTD28__DSPI2_SOUT 0x108 0x000 ALT5 0x0
+#define VF610_PAD_PTD28__DEBUG_OUT12 0x108 0x000 ALT7 0x0
+#define VF610_PAD_PTD27__GPIO_67 0x10C 0x000 ALT0 0x0
+#define VF610_PAD_PTD27__FB_AD27 0x10C 0x000 ALT1 0x0
+#define VF610_PAD_PTD27__NF_IO11 0x10C 0x000 ALT2 0x0
+#define VF610_PAD_PTD27__I2C2_SDA 0x10C 0x350 ALT3 0x1
+#define VF610_PAD_PTD27__FTM3_CH4 0x10C 0x000 ALT4 0x0
+#define VF610_PAD_PTD27__DSPI2_SCK 0x10C 0x000 ALT5 0x0
+#define VF610_PAD_PTD27__DEBUG_OUT13 0x10C 0x000 ALT7 0x0
+#define VF610_PAD_PTD26__GPIO_68 0x110 0x000 ALT0 0x0
+#define VF610_PAD_PTD26__FB_AD26 0x110 0x000 ALT1 0x0
+#define VF610_PAD_PTD26__NF_IO10 0x110 0x000 ALT2 0x0
+#define VF610_PAD_PTD26__FTM3_CH5 0x110 0x000 ALT4 0x0
+#define VF610_PAD_PTD26__ESDHC1_WP 0x110 0x000 ALT5 0x0
+#define VF610_PAD_PTD26__DEBUG_OUT14 0x110 0x000 ALT7 0x0
+#define VF610_PAD_PTD25__GPIO_69 0x114 0x000 ALT0 0x0
+#define VF610_PAD_PTD25__FB_AD25 0x114 0x000 ALT1 0x0
+#define VF610_PAD_PTD25__NF_IO9 0x114 0x000 ALT2 0x0
+#define VF610_PAD_PTD25__FTM3_CH6 0x114 0x000 ALT4 0x0
+#define VF610_PAD_PTD25__DEBUG_OUT15 0x114 0x000 ALT7 0x0
+#define VF610_PAD_PTD24__GPIO_70 0x118 0x000 ALT0 0x0
+#define VF610_PAD_PTD24__FB_AD24 0x118 0x000 ALT1 0x0
+#define VF610_PAD_PTD24__NF_IO8 0x118 0x000 ALT2 0x0
+#define VF610_PAD_PTD24__FTM3_CH7 0x118 0x000 ALT4 0x0
+#define VF610_PAD_PTD24__DEBUG_OUT16 0x118 0x000 ALT7 0x0
+#define VF610_PAD_PTD23__GPIO_71 0x11C 0x000 ALT0 0x0
+#define VF610_PAD_PTD23__FB_AD23 0x11C 0x000 ALT1 0x0
+#define VF610_PAD_PTD23__NF_IO7 0x11C 0x000 ALT2 0x0
+#define VF610_PAD_PTD23__FTM2_CH0 0x11C 0x000 ALT3 0x0
+#define VF610_PAD_PTD23__ENET0_1588_TMR0 0x11C 0x304 ALT4 0x1
+#define VF610_PAD_PTD23__ESDHC0_DAT4 0x11C 0x000 ALT5 0x0
+#define VF610_PAD_PTD23__UART2_TX 0x11C 0x38C ALT6 0x1
+#define VF610_PAD_PTD23__DCU1_R3 0x11C 0x000 ALT7 0x0
+#define VF610_PAD_PTD22__GPIO_72 0x120 0x000 ALT0 0x0
+#define VF610_PAD_PTD22__FB_AD22 0x120 0x000 ALT1 0x0
+#define VF610_PAD_PTD22__NF_IO6 0x120 0x000 ALT2 0x0
+#define VF610_PAD_PTD22__FTM2_CH1 0x120 0x000 ALT3 0x0
+#define VF610_PAD_PTD22__ENET0_1588_TMR1 0x120 0x308 ALT4 0x1
+#define VF610_PAD_PTD22__ESDHC0_DAT5 0x120 0x000 ALT5 0x0
+#define VF610_PAD_PTD22__UART2_RX 0x120 0x388 ALT6 0x1
+#define VF610_PAD_PTD22__DCU1_R4 0x120 0x000 ALT7 0x0
+#define VF610_PAD_PTD21__GPIO_73 0x124 0x000 ALT0 0x0
+#define VF610_PAD_PTD21__FB_AD21 0x124 0x000 ALT1 0x0
+#define VF610_PAD_PTD21__NF_IO5 0x124 0x000 ALT2 0x0
+#define VF610_PAD_PTD21__ENET0_1588_TMR2 0x124 0x000 ALT4 0x0
+#define VF610_PAD_PTD21__ESDHC0_DAT6 0x124 0x000 ALT5 0x0
+#define VF610_PAD_PTD21__UART2_RTS 0x124 0x000 ALT6 0x0
+#define VF610_PAD_PTD21__DCU1_R5 0x124 0x000 ALT7 0x0
+#define VF610_PAD_PTD20__GPIO_74 0x128 0x000 ALT0 0x0
+#define VF610_PAD_PTD20__FB_AD20 0x128 0x000 ALT1 0x0
+#define VF610_PAD_PTD20__NF_IO4 0x128 0x000 ALT2 0x0
+#define VF610_PAD_PTD20__ENET0_1588_TMR3 0x128 0x000 ALT4 0x0
+#define VF610_PAD_PTD20__ESDHC0_DAT7 0x128 0x000 ALT5 0x0
+#define VF610_PAD_PTD20__UART2_CTS 0x128 0x384 ALT6 0x0
+#define VF610_PAD_PTD20__DCU1_R0 0x128 0x000 ALT7 0x0
+#define VF610_PAD_PTD19__GPIO_75 0x12C 0x000 ALT0 0x0
+#define VF610_PAD_PTD19__FB_AD19 0x12C 0x000 ALT1 0x0
+#define VF610_PAD_PTD19__NF_IO3 0x12C 0x000 ALT2 0x0
+#define VF610_PAD_PTD19__ESAI_SCKR 0x12C 0x000 ALT3 0x0
+#define VF610_PAD_PTD19__I2C0_SCL 0x12C 0x33C ALT4 0x2
+#define VF610_PAD_PTD19__FTM2_QD_PHA 0x12C 0x000 ALT5 0x0
+#define VF610_PAD_PTD19__DCU1_R1 0x12C 0x000 ALT7 0x0
+#define VF610_PAD_PTD18__GPIO_76 0x130 0x000 ALT0 0x0
+#define VF610_PAD_PTD18__FB_AD18 0x130 0x000 ALT1 0x0
+#define VF610_PAD_PTD18__NF_IO2 0x130 0x000 ALT2 0x0
+#define VF610_PAD_PTD18__ESAI_FSR 0x130 0x000 ALT3 0x0
+#define VF610_PAD_PTD18__I2C0_SDA 0x130 0x340 ALT4 0x2
+#define VF610_PAD_PTD18__FTM2_QD_PHB 0x130 0x000 ALT5 0x0
+#define VF610_PAD_PTD18__DCU1_G0 0x130 0x000 ALT7 0x0
+#define VF610_PAD_PTD17__GPIO_77 0x134 0x000 ALT0 0x0
+#define VF610_PAD_PTD17__FB_AD17 0x134 0x000 ALT1 0x0
+#define VF610_PAD_PTD17__NF_IO1 0x134 0x000 ALT2 0x0
+#define VF610_PAD_PTD17__ESAI_HCKR 0x134 0x000 ALT3 0x0
+#define VF610_PAD_PTD17__I2C1_SCL 0x134 0x344 ALT4 0x2
+#define VF610_PAD_PTD17__DCU1_G1 0x134 0x000 ALT7 0x0
+#define VF610_PAD_PTD16__GPIO_78 0x138 0x000 ALT0 0x0
+#define VF610_PAD_PTD16__FB_AD16 0x138 0x000 ALT1 0x0
+#define VF610_PAD_PTD16__NF_IO0 0x138 0x000 ALT2 0x0
+#define VF610_PAD_PTD16__ESAI_HCKT 0x138 0x000 ALT3 0x0
+#define VF610_PAD_PTD16__I2C1_SDA 0x138 0x348 ALT4 0x2
+#define VF610_PAD_PTD16__DCU1_G2 0x138 0x000 ALT7 0x0
+#define VF610_PAD_PTD0__GPIO_79 0x13C 0x000 ALT0 0x0
+#define VF610_PAD_PTD0__QSPI0_A_QSCK 0x13C 0x000 ALT1 0x0
+#define VF610_PAD_PTD0__UART2_TX 0x13C 0x38C ALT2 0x2
+#define VF610_PAD_PTD0__FB_AD15 0x13C 0x000 ALT4 0x0
+#define VF610_PAD_PTD0__SPDIF_EXTCLK 0x13C 0x000 ALT5 0x0
+#define VF610_PAD_PTD0__DEBUG_OUT17 0x13C 0x000 ALT7 0x0
+#define VF610_PAD_PTD1__GPIO_80 0x140 0x000 ALT0 0x0
+#define VF610_PAD_PTD1__QSPI0_A_CS0 0x140 0x000 ALT1 0x0
+#define VF610_PAD_PTD1__UART2_RX 0x140 0x388 ALT2 0x2
+#define VF610_PAD_PTD1__FB_AD14 0x140 0x000 ALT4 0x0
+#define VF610_PAD_PTD1__SPDIF_IN1 0x140 0x000 ALT5 0x0
+#define VF610_PAD_PTD1__DEBUG_OUT18 0x140 0x000 ALT7 0x0
+#define VF610_PAD_PTD2__GPIO_81 0x144 0x000 ALT0 0x0
+#define VF610_PAD_PTD2__QSPI0_A_DATA3 0x144 0x000 ALT1 0x0
+#define VF610_PAD_PTD2__UART2_RTS 0x144 0x000 ALT2 0x0
+#define VF610_PAD_PTD2__DSPI1_CS3 0x144 0x000 ALT3 0x0
+#define VF610_PAD_PTD2__FB_AD13 0x144 0x000 ALT4 0x0
+#define VF610_PAD_PTD2__SPDIF_OUT1 0x144 0x000 ALT5 0x0
+#define VF610_PAD_PTD2__DEBUG_OUT19 0x144 0x000 ALT7 0x0
+#define VF610_PAD_PTD3__GPIO_82 0x148 0x000 ALT0 0x0
+#define VF610_PAD_PTD3__QSPI0_A_DATA2 0x148 0x000 ALT1 0x0
+#define VF610_PAD_PTD3__UART2_CTS 0x148 0x384 ALT2 0x1
+#define VF610_PAD_PTD3__DSPI1_CS2 0x148 0x000 ALT3 0x0
+#define VF610_PAD_PTD3__FB_AD12 0x148 0x000 ALT4 0x0
+#define VF610_PAD_PTD3__SPDIF_PLOCK 0x148 0x000 ALT5 0x0
+#define VF610_PAD_PTD3__DEBUG_OUT20 0x148 0x000 ALT7 0x0
+#define VF610_PAD_PTD4__GPIO_83 0x14C 0x000 ALT0 0x0
+#define VF610_PAD_PTD4__QSPI0_A_DATA1 0x14C 0x000 ALT1 0x0
+#define VF610_PAD_PTD4__DSPI1_CS1 0x14C 0x000 ALT3 0x0
+#define VF610_PAD_PTD4__FB_AD11 0x14C 0x000 ALT4 0x0
+#define VF610_PAD_PTD4__SPDIF_SRCLK 0x14C 0x000 ALT5 0x0
+#define VF610_PAD_PTD4__DEBUG_OUT21 0x14C 0x000 ALT7 0x0
+#define VF610_PAD_PTD5__GPIO_84 0x150 0x000 ALT0 0x0
+#define VF610_PAD_PTD5__QSPI0_A_DATA0 0x150 0x000 ALT1 0x0
+#define VF610_PAD_PTD5__DSPI1_CS0 0x150 0x300 ALT3 0x1
+#define VF610_PAD_PTD5__FB_AD10 0x150 0x000 ALT4 0x0
+#define VF610_PAD_PTD5__DEBUG_OUT22 0x150 0x000 ALT7 0x0
+#define VF610_PAD_PTD6__GPIO_85 0x154 0x000 ALT0 0x0
+#define VF610_PAD_PTD6__QSPI1_A_DQS 0x154 0x000 ALT1 0x0
+#define VF610_PAD_PTD6__DSPI1_SIN 0x154 0x2FC ALT3 0x1
+#define VF610_PAD_PTD6__FB_AD9 0x154 0x000 ALT4 0x0
+#define VF610_PAD_PTD6__DEBUG_OUT23 0x154 0x000 ALT7 0x0
+#define VF610_PAD_PTD7__GPIO_86 0x158 0x000 ALT0 0x0
+#define VF610_PAD_PTD7__QSPI0_B_QSCK 0x158 0x000 ALT1 0x0
+#define VF610_PAD_PTD7__DSPI1_SOUT 0x158 0x000 ALT3 0x0
+#define VF610_PAD_PTD7__FB_AD8 0x158 0x000 ALT4 0x0
+#define VF610_PAD_PTD7__DEBUG_OUT24 0x158 0x000 ALT7 0x0
+#define VF610_PAD_PTD8__GPIO_87 0x15C 0x000 ALT0 0x0
+#define VF610_PAD_PTD8__QSPI0_B_CS0 0x15C 0x000 ALT1 0x0
+#define VF610_PAD_PTD8__FB_CLKOUT 0x15C 0x000 ALT2 0x0
+#define VF610_PAD_PTD8__DSPI1_SCK 0x15C 0x2F8 ALT3 0x1
+#define VF610_PAD_PTD8__FB_AD7 0x15C 0x000 ALT4 0x0
+#define VF610_PAD_PTD8__DEBUG_OUT25 0x15C 0x000 ALT7 0x0
+#define VF610_PAD_PTD9__GPIO_88 0x160 0x000 ALT0 0x0
+#define VF610_PAD_PTD9__QSPI0_B_DATA3 0x160 0x000 ALT1 0x0
+#define VF610_PAD_PTD9__DSPI3_CS1 0x160 0x000 ALT2 0x0
+#define VF610_PAD_PTD9__FB_AD6 0x160 0x000 ALT4 0x0
+#define VF610_PAD_PTD9__SAI1_TX_SYNC 0x160 0x360 ALT6 0x0
+#define VF610_PAD_PTD9__DCU1_B0 0x160 0x000 ALT7 0x0
+#define VF610_PAD_PTD10__GPIO_89 0x164 0x000 ALT0 0x0
+#define VF610_PAD_PTD10__QSPI0_B_DATA2 0x164 0x000 ALT1 0x0
+#define VF610_PAD_PTD10__DSPI3_CS0 0x164 0x000 ALT2 0x0
+#define VF610_PAD_PTD10__FB_AD5 0x164 0x000 ALT4 0x0
+#define VF610_PAD_PTD10__DCU1_B1 0x164 0x000 ALT7 0x0
+#define VF610_PAD_PTD11__GPIO_90 0x168 0x000 ALT0 0x0
+#define VF610_PAD_PTD11__QSPI0_B_DATA1 0x168 0x000 ALT1 0x0
+#define VF610_PAD_PTD11__DSPI3_SIN 0x168 0x000 ALT2 0x0
+#define VF610_PAD_PTD11__FB_AD4 0x168 0x000 ALT4 0x0
+#define VF610_PAD_PTD11__DEBUG_OUT26 0x168 0x000 ALT7 0x0
+#define VF610_PAD_PTD12__GPIO_91 0x16C 0x000 ALT0 0x0
+#define VF610_PAD_PTD12__QSPI0_B_DATA0 0x16C 0x000 ALT1 0x0
+#define VF610_PAD_PTD12__DSPI3_SOUT 0x16C 0x000 ALT2 0x0
+#define VF610_PAD_PTD12__FB_AD3 0x16C 0x000 ALT4 0x0
+#define VF610_PAD_PTD12__DEBUG_OUT27 0x16C 0x000 ALT7 0x0
+#define VF610_PAD_PTD13__GPIO_92 0x170 0x000 ALT0 0x0
+#define VF610_PAD_PTD13__QSPI0_B_DQS 0x170 0x000 ALT1 0x0
+#define VF610_PAD_PTD13__DSPI3_SCK 0x170 0x000 ALT2 0x0
+#define VF610_PAD_PTD13__FB_AD2 0x170 0x000 ALT4 0x0
+#define VF610_PAD_PTD13__DEBUG_OUT28 0x170 0x000 ALT7 0x0
+#define VF610_PAD_PTB23__GPIO_93 0x174 0x000 ALT0 0x0
+#define VF610_PAD_PTB23__SAI0_TX_BCLK 0x174 0x000 ALT1 0x0
+#define VF610_PAD_PTB23__UART1_TX 0x174 0x380 ALT2 0x2
+#define VF610_PAD_PTB23__SRC_RCON18 0x174 0x398 ALT3 0x1
+#define VF610_PAD_PTB23__FB_MUXED_ALE 0x174 0x000 ALT4 0x0
+#define VF610_PAD_PTB23__FB_TS_B 0x174 0x000 ALT5 0x0
+#define VF610_PAD_PTB23__UART3_RTS 0x174 0x000 ALT6 0x0
+#define VF610_PAD_PTB23__DCU1_G3 0x174 0x000 ALT7 0x0
+#define VF610_PAD_PTB24__GPIO_94 0x178 0x000 ALT0 0x0
+#define VF610_PAD_PTB24__SAI0_RX_BCLK 0x178 0x000 ALT1 0x0
+#define VF610_PAD_PTB24__UART1_RX 0x178 0x37C ALT2 0x2
+#define VF610_PAD_PTB24__SRC_RCON19 0x178 0x39C ALT3 0x1
+#define VF610_PAD_PTB24__FB_MUXED_TSIZ0 0x178 0x000 ALT4 0x0
+#define VF610_PAD_PTB24__NF_WE_B 0x178 0x000 ALT5 0x0
+#define VF610_PAD_PTB24__UART3_CTS 0x178 0x000 ALT6 0x0
+#define VF610_PAD_PTB24__DCU1_G4 0x178 0x000 ALT7 0x0
+#define VF610_PAD_PTB25__GPIO_95 0x17C 0x000 ALT0 0x0
+#define VF610_PAD_PTB25__SAI0_RX_DATA 0x17C 0x000 ALT1 0x0
+#define VF610_PAD_PTB25__UART1_RTS 0x17C 0x000 ALT2 0x0
+#define VF610_PAD_PTB25__SRC_RCON20 0x17C 0x3A0 ALT3 0x1
+#define VF610_PAD_PTB25__FB_CS1_B 0x17C 0x000 ALT4 0x0
+#define VF610_PAD_PTB25__NF_CE0_B 0x17C 0x000 ALT5 0x0
+#define VF610_PAD_PTB25__DCU1_G5 0x17C 0x000 ALT7 0x0
+#define VF610_PAD_PTB26__GPIO_96 0x180 0x000 ALT0 0x0
+#define VF610_PAD_PTB26__SAI0_TX_DATA 0x180 0x000 ALT1 0x0
+#define VF610_PAD_PTB26__UART1_CTS 0x180 0x378 ALT2 0x2
+#define VF610_PAD_PTB26__SRC_RCON21 0x180 0x000 ALT3 0x0
+#define VF610_PAD_PTB26__FB_CS0_B 0x180 0x000 ALT4 0x0
+#define VF610_PAD_PTB26__NF_CE1_B 0x180 0x000 ALT5 0x0
+#define VF610_PAD_PTB26__DCU1_G6 0x180 0x000 ALT7 0x0
+#define VF610_PAD_PTB27__GPIO_97 0x184 0x000 ALT0 0x0
+#define VF610_PAD_PTB27__SAI0_RX_SYNC 0x184 0x000 ALT1 0x0
+#define VF610_PAD_PTB27__SRC_RCON22 0x184 0x000 ALT3 0x0
+#define VF610_PAD_PTB27__FB_OE_B 0x184 0x000 ALT4 0x0
+#define VF610_PAD_PTB27__FB_MUXED_TBST_B 0x184 0x000 ALT5 0x0
+#define VF610_PAD_PTB27__NF_RE_B 0x184 0x000 ALT6 0x0
+#define VF610_PAD_PTB27__DCU1_G7 0x184 0x000 ALT7 0x0
+#define VF610_PAD_PTB28__GPIO_98 0x188 0x000 ALT0 0x0
+#define VF610_PAD_PTB28__SAI0_TX_SYNC 0x188 0x000 ALT1 0x0
+#define VF610_PAD_PTB28__SRC_RCON23 0x188 0x000 ALT3 0x0
+#define VF610_PAD_PTB28__FB_RW_B 0x188 0x000 ALT4 0x0
+#define VF610_PAD_PTB28__DCU1_B6 0x188 0x000 ALT7 0x0
+#define VF610_PAD_PTC26__GPIO_99 0x18C 0x000 ALT0 0x0
+#define VF610_PAD_PTC26__SAI1_TX_BCLK 0x18C 0x000 ALT1 0x0
+#define VF610_PAD_PTC26__DSPI0_CS5 0x18C 0x000 ALT2 0x0
+#define VF610_PAD_PTC26__SRC_RCON24 0x18C 0x000 ALT3 0x0
+#define VF610_PAD_PTC26__FB_TA_B 0x18C 0x000 ALT4 0x0
+#define VF610_PAD_PTC26__NF_RB_B 0x18C 0x000 ALT5 0x0
+#define VF610_PAD_PTC26__DCU1_B7 0x18C 0x000 ALT7 0x0
+#define VF610_PAD_PTC27__GPIO_100 0x190 0x000 ALT0 0x0
+#define VF610_PAD_PTC27__SAI1_RX_BCLK 0x190 0x000 ALT1 0x0
+#define VF610_PAD_PTC27__DSPI0_CS4 0x190 0x000 ALT2 0x0
+#define VF610_PAD_PTC27__SRC_RCON25 0x190 0x000 ALT3 0x0
+#define VF610_PAD_PTC27__FB_BE3_B 0x190 0x000 ALT4 0x0
+#define VF610_PAD_PTC27__FB_CS3_B 0x190 0x000 ALT5 0x0
+#define VF610_PAD_PTC27__NF_ALE 0x190 0x000 ALT6 0x0
+#define VF610_PAD_PTC27__DCU1_B2 0x190 0x000 ALT7 0x0
+#define VF610_PAD_PTC28__GPIO_101 0x194 0x000 ALT0 0x0
+#define VF610_PAD_PTC28__SAI1_RX_DATA 0x194 0x000 ALT1 0x0
+#define VF610_PAD_PTC28__DSPI0_CS3 0x194 0x000 ALT2 0x0
+#define VF610_PAD_PTC28__SRC_RCON26 0x194 0x000 ALT3 0x0
+#define VF610_PAD_PTC28__FB_BE2_B 0x194 0x000 ALT4 0x0
+#define VF610_PAD_PTC28__FB_CS2_B 0x194 0x000 ALT5 0x0
+#define VF610_PAD_PTC28__NF_CLE 0x194 0x000 ALT6 0x0
+#define VF610_PAD_PTC28__DCU1_B3 0x194 0x000 ALT7 0x0
+#define VF610_PAD_PTC29__GPIO_102 0x198 0x000 ALT0 0x0
+#define VF610_PAD_PTC29__SAI1_TX_DATA 0x198 0x000 ALT1 0x0
+#define VF610_PAD_PTC29__DSPI0_CS2 0x198 0x000 ALT2 0x0
+#define VF610_PAD_PTC29__SRC_RCON27 0x198 0x000 ALT3 0x0
+#define VF610_PAD_PTC29__FB_BE1_B 0x198 0x000 ALT4 0x0
+#define VF610_PAD_PTC29__FB_MUXED_TSIZE1 0x198 0x000 ALT5 0x0
+#define VF610_PAD_PTC29__DCU1_B4 0x198 0x000 ALT7 0x0
+#define VF610_PAD_PTC30__GPIO_103 0x19C 0x000 ALT0 0x0
+#define VF610_PAD_PTC30__SAI1_RX_SYNC 0x19C 0x000 ALT1 0x0
+#define VF610_PAD_PTC30__DSPI1_CS2 0x19C 0x000 ALT2 0x0
+#define VF610_PAD_PTC30__SRC_RCON28 0x19C 0x000 ALT3 0x0
+#define VF610_PAD_PTC30__FB_MUXED_BE0_B 0x19C 0x000 ALT4 0x0
+#define VF610_PAD_PTC30__FB_TSIZ0 0x19C 0x000 ALT5 0x0
+#define VF610_PAD_PTC30__ADC0_SE5 0x19C 0x000 ALT6 0x0
+#define VF610_PAD_PTC30__DCU1_B5 0x19C 0x000 ALT7 0x0
+#define VF610_PAD_PTC31__GPIO_104 0x1A0 0x000 ALT0 0x0
+#define VF610_PAD_PTC31__SAI1_TX_SYNC 0x1A0 0x360 ALT1 0x1
+#define VF610_PAD_PTC31__SRC_RCON29 0x1A0 0x000 ALT3 0x0
+#define VF610_PAD_PTC31__ADC1_SE5 0x1A0 0x000 ALT6 0x0
+#define VF610_PAD_PTC31__DCU1_B6 0x1A0 0x000 ALT7 0x0
+#define VF610_PAD_PTE0__GPIO_105 0x1A4 0x000 ALT0 0x0
+#define VF610_PAD_PTE0__DCU0_HSYNC 0x1A4 0x000 ALT1 0x0
+#define VF610_PAD_PTE0__SRC_BMODE1 0x1A4 0x000 ALT2 0x0
+#define VF610_PAD_PTE0__LCD0 0x1A4 0x000 ALT4 0x0
+#define VF610_PAD_PTE0__DEBUG_OUT29 0x1A4 0x000 ALT7 0x0
+#define VF610_PAD_PTE1__GPIO_106 0x1A8 0x000 ALT0 0x0
+#define VF610_PAD_PTE1__DCU0_VSYNC 0x1A8 0x000 ALT1 0x0
+#define VF610_PAD_PTE1__SRC_BMODE0 0x1A8 0x000 ALT2 0x0
+#define VF610_PAD_PTE1__LCD1 0x1A8 0x000 ALT4 0x0
+#define VF610_PAD_PTE1__DEBUG_OUT30 0x1A8 0x000 ALT7 0x0
+#define VF610_PAD_PTE2__GPIO_107 0x1AC 0x000 ALT0 0x0
+#define VF610_PAD_PTE2__DCU0_PCLK 0x1AC 0x000 ALT1 0x0
+#define VF610_PAD_PTE2__LCD2 0x1AC 0x000 ALT4 0x0
+#define VF610_PAD_PTE2__DEBUG_OUT31 0x1AC 0x000 ALT7 0x0
+#define VF610_PAD_PTE3__GPIO_108 0x1B0 0x000 ALT0 0x0
+#define VF610_PAD_PTE3__DCU0_TAG 0x1B0 0x000 ALT1 0x0
+#define VF610_PAD_PTE3__LCD3 0x1B0 0x000 ALT4 0x0
+#define VF610_PAD_PTE3__DEBUG_OUT32 0x1B0 0x000 ALT7 0x0
+#define VF610_PAD_PTE4__GPIO_109 0x1B4 0x000 ALT0 0x0
+#define VF610_PAD_PTE4__DCU0_DE 0x1B4 0x000 ALT1 0x0
+#define VF610_PAD_PTE4__LCD4 0x1B4 0x000 ALT4 0x0
+#define VF610_PAD_PTE4__DEBUG_OUT33 0x1B4 0x000 ALT7 0x0
+#define VF610_PAD_PTE5__GPIO_110 0x1B8 0x000 ALT0 0x0
+#define VF610_PAD_PTE5__DCU0_R0 0x1B8 0x000 ALT1 0x0
+#define VF610_PAD_PTE5__LCD5 0x1B8 0x000 ALT4 0x0
+#define VF610_PAD_PTE5__DEBUG_OUT34 0x1B8 0x000 ALT7 0x0
+#define VF610_PAD_PTE6__GPIO_111 0x1BC 0x000 ALT0 0x0
+#define VF610_PAD_PTE6__DCU0_R1 0x1BC 0x000 ALT1 0x0
+#define VF610_PAD_PTE6__LCD6 0x1BC 0x000 ALT4 0x0
+#define VF610_PAD_PTE6__DEBUG_OUT35 0x1BC 0x000 ALT7 0x0
+#define VF610_PAD_PTE7__GPIO_112 0x1C0 0x000 ALT0 0x0
+#define VF610_PAD_PTE7__DCU0_R2 0x1C0 0x000 ALT1 0x0
+#define VF610_PAD_PTE7__SRC_RCON0 0x1C0 0x000 ALT3 0x0
+#define VF610_PAD_PTE7__LCD7 0x1C0 0x000 ALT4 0x0
+#define VF610_PAD_PTE7__DEBUG_OUT36 0x1C0 0x000 ALT7 0x0
+#define VF610_PAD_PTE8__GPIO_113 0x1C4 0x000 ALT0 0x0
+#define VF610_PAD_PTE8__DCU0_R3 0x1C4 0x000 ALT1 0x0
+#define VF610_PAD_PTE8__SRC_RCON1 0x1C4 0x000 ALT3 0x0
+#define VF610_PAD_PTE8__LCD8 0x1C4 0x000 ALT4 0x0
+#define VF610_PAD_PTE8__DEBUG_OUT37 0x1C4 0x000 ALT7 0x0
+#define VF610_PAD_PTE9__GPIO_114 0x1C8 0x000 ALT0 0x0
+#define VF610_PAD_PTE9__DCU0_R4 0x1C8 0x000 ALT1 0x0
+#define VF610_PAD_PTE9__SRC_RCON2 0x1C8 0x000 ALT3 0x0
+#define VF610_PAD_PTE9__LCD9 0x1C8 0x000 ALT4 0x0
+#define VF610_PAD_PTE9__DEBUG_OUT38 0x1C8 0x000 ALT7 0x0
+#define VF610_PAD_PTE10__GPIO_115 0x1CC 0x000 ALT0 0x0
+#define VF610_PAD_PTE10__DCU0_R5 0x1CC 0x000 ALT1 0x0
+#define VF610_PAD_PTE10__SRC_RCON3 0x1CC 0x000 ALT3 0x0
+#define VF610_PAD_PTE10__LCD10 0x1CC 0x000 ALT4 0x0
+#define VF610_PAD_PTE10__DEBUG_OUT39 0x1CC 0x000 ALT7 0x0
+#define VF610_PAD_PTE11__GPIO_116 0x1D0 0x000 ALT0 0x0
+#define VF610_PAD_PTE11__DCU0_R6 0x1D0 0x000 ALT1 0x0
+#define VF610_PAD_PTE11__SRC_RCON4 0x1D0 0x000 ALT3 0x0
+#define VF610_PAD_PTE11__LCD11 0x1D0 0x000 ALT4 0x0
+#define VF610_PAD_PTE11__DEBUG_OUT40 0x1D0 0x000 ALT7 0x0
+#define VF610_PAD_PTE12__GPIO_117 0x1D4 0x000 ALT0 0x0
+#define VF610_PAD_PTE12__DCU0_R7 0x1D4 0x000 ALT1 0x0
+#define VF610_PAD_PTE12__DSPI1_CS3 0x1D4 0x000 ALT2 0x0
+#define VF610_PAD_PTE12__SRC_RCON5 0x1D4 0x000 ALT3 0x0
+#define VF610_PAD_PTE12__LCD12 0x1D4 0x000 ALT4 0x0
+#define VF610_PAD_PTE12__LPT_ALT0 0x1D4 0x000 ALT7 0x0
+#define VF610_PAD_PTE13__GPIO_118 0x1D8 0x000 ALT0 0x0
+#define VF610_PAD_PTE13__DCU0_G0 0x1D8 0x000 ALT1 0x0
+#define VF610_PAD_PTE13__LCD13 0x1D8 0x000 ALT4 0x0
+#define VF610_PAD_PTE13__DEBUG_OUT41 0x1D8 0x000 ALT7 0x0
+#define VF610_PAD_PTE14__GPIO_119 0x1DC 0x000 ALT0 0x0
+#define VF610_PAD_PTE14__DCU0_G1 0x1DC 0x000 ALT1 0x0
+#define VF610_PAD_PTE14__LCD14 0x1DC 0x000 ALT4 0x0
+#define VF610_PAD_PTE14__DEBUG_OUT42 0x1DC 0x000 ALT7 0x0
+#define VF610_PAD_PTE15__GPIO_120 0x1E0 0x000 ALT0 0x0
+#define VF610_PAD_PTE15__DCU0_G2 0x1E0 0x000 ALT1 0x0
+#define VF610_PAD_PTE15__SRC_RCON6 0x1E0 0x000 ALT3 0x0
+#define VF610_PAD_PTE15__LCD15 0x1E0 0x000 ALT4 0x0
+#define VF610_PAD_PTE15__DEBUG_OUT43 0x1E0 0x000 ALT7 0x0
+#define VF610_PAD_PTE16__GPIO_121 0x1E4 0x000 ALT0 0x0
+#define VF610_PAD_PTE16__DCU0_G3 0x1E4 0x000 ALT1 0x0
+#define VF610_PAD_PTE16__SRC_RCON7 0x1E4 0x000 ALT3 0x0
+#define VF610_PAD_PTE16__LCD16 0x1E4 0x000 ALT4 0x0
+#define VF610_PAD_PTE17__GPIO_122 0x1E8 0x000 ALT0 0x0
+#define VF610_PAD_PTE17__DCU0_G4 0x1E8 0x000 ALT1 0x0
+#define VF610_PAD_PTE17__SRC_RCON8 0x1E8 0x000 ALT3 0x0
+#define VF610_PAD_PTE17__LCD17 0x1E8 0x000 ALT4 0x0
+#define VF610_PAD_PTE18__GPIO_123 0x1EC 0x000 ALT0 0x0
+#define VF610_PAD_PTE18__DCU0_G5 0x1EC 0x000 ALT1 0x0
+#define VF610_PAD_PTE18__SRC_RCON9 0x1EC 0x000 ALT3 0x0
+#define VF610_PAD_PTE18__LCD18 0x1EC 0x000 ALT4 0x0
+#define VF610_PAD_PTE19__GPIO_124 0x1F0 0x000 ALT0 0x0
+#define VF610_PAD_PTE19__DCU0_G6 0x1F0 0x000 ALT1 0x0
+#define VF610_PAD_PTE19__SRC_RCON10 0x1F0 0x000 ALT3 0x0
+#define VF610_PAD_PTE19__LCD19 0x1F0 0x000 ALT4 0x0
+#define VF610_PAD_PTE19__I2C0_SCL 0x1F0 0x33C ALT5 0x3
+#define VF610_PAD_PTE20__GPIO_125 0x1F4 0x000 ALT0 0x0
+#define VF610_PAD_PTE20__DCU0_G7 0x1F4 0x000 ALT1 0x0
+#define VF610_PAD_PTE20__SRC_RCON11 0x1F4 0x000 ALT3 0x0
+#define VF610_PAD_PTE20__LCD20 0x1F4 0x000 ALT4 0x0
+#define VF610_PAD_PTE20__I2C0_SDA 0x1F4 0x340 ALT5 0x3
+#define VF610_PAD_PTE20__EWM_IN 0x1F4 0x000 ALT7 0x0
+#define VF610_PAD_PTE21__GPIO_126 0x1F8 0x000 ALT0 0x0
+#define VF610_PAD_PTE21__DCU0_B0 0x1F8 0x000 ALT1 0x0
+#define VF610_PAD_PTE21__LCD21 0x1F8 0x000 ALT4 0x0
+#define VF610_PAD_PTE22__GPIO_127 0x1FC 0x000 ALT0 0x0
+#define VF610_PAD_PTE22__DCU0_B1 0x1FC 0x000 ALT1 0x0
+#define VF610_PAD_PTE22__LCD22 0x1FC 0x000 ALT4 0x0
+#define VF610_PAD_PTE23__GPIO_128 0x200 0x000 ALT0 0x0
+#define VF610_PAD_PTE23__DCU0_B2 0x200 0x000 ALT1 0x0
+#define VF610_PAD_PTE23__SRC_RCON12 0x200 0x000 ALT3 0x0
+#define VF610_PAD_PTE23__LCD23 0x200 0x000 ALT4 0x0
+#define VF610_PAD_PTE24__GPIO_129 0x204 0x000 ALT0 0x0
+#define VF610_PAD_PTE24__DCU0_B3 0x204 0x000 ALT1 0x0
+#define VF610_PAD_PTE24__SRC_RCON13 0x204 0x000 ALT3 0x0
+#define VF610_PAD_PTE24__LCD24 0x204 0x000 ALT4 0x0
+#define VF610_PAD_PTE25__GPIO_130 0x208 0x000 ALT0 0x0
+#define VF610_PAD_PTE25__DCU0_B4 0x208 0x000 ALT1 0x0
+#define VF610_PAD_PTE25__SRC_RCON14 0x208 0x000 ALT3 0x0
+#define VF610_PAD_PTE25__LCD25 0x208 0x000 ALT4 0x0
+#define VF610_PAD_PTE26__GPIO_131 0x20C 0x000 ALT0 0x0
+#define VF610_PAD_PTE26__DCU0_B5 0x20C 0x000 ALT1 0x0
+#define VF610_PAD_PTE26__SRC_RCON15 0x20C 0x000 ALT3 0x0
+#define VF610_PAD_PTE26__LCD26 0x20C 0x000 ALT4 0x0
+#define VF610_PAD_PTE27__GPIO_132 0x210 0x000 ALT0 0x0
+#define VF610_PAD_PTE27__DCU0_B6 0x210 0x000 ALT1 0x0
+#define VF610_PAD_PTE27__SRC_RCON16 0x210 0x000 ALT3 0x0
+#define VF610_PAD_PTE27__LCD27 0x210 0x000 ALT4 0x0
+#define VF610_PAD_PTE27__I2C1_SCL 0x210 0x344 ALT5 0x3
+#define VF610_PAD_PTE28__GPIO_133 0x214 0x000 ALT0 0x0
+#define VF610_PAD_PTE28__DCU0_B7 0x214 0x000 ALT1 0x0
+#define VF610_PAD_PTE28__SRC_RCON17 0x214 0x000 ALT3 0x0
+#define VF610_PAD_PTE28__LCD28 0x214 0x000 ALT4 0x0
+#define VF610_PAD_PTE28__I2C1_SDA 0x214 0x348 ALT5 0x3
+#define VF610_PAD_PTE28__EWM_OUT 0x214 0x000 ALT7 0x0
+#define VF610_PAD_PTA7__GPIO_134 0x218 0x000 ALT0 0x0
+#define VF610_PAD_PTA7__VIU_PIX_CLK 0x218 0x3AC ALT1 0x1
+
+#endif
#define MXC_CPU_MX6QP 0x69
#define MXC_CPU_MX7S 0x71 /* dummy ID */
#define MXC_CPU_MX7D 0x72
-#define MXC_CPU_MX8MQ 0x82
+#define MXC_CPU_IMX8MQ 0x82
#define MXC_CPU_IMX8QXP_A0 0x90 /* dummy ID */
#define MXC_CPU_IMX8QXP 0x92 /* dummy ID */
#define MXC_CPU_MX7ULP 0xE1 /* Temporally hard code */
#define MXC_SOC_MX6 0x60
#define MXC_SOC_MX7 0x70
-#define MXC_SOC_MX8M 0x80
+#define MXC_SOC_IMX8M 0x80
#define MXC_SOC_IMX8 0x90 /* dummy */
#define MXC_SOC_MX7ULP 0xE0 /* dummy */
#define CHIP_REV_1_2 0x12
#define CHIP_REV_1_5 0x15
#define CHIP_REV_2_0 0x20
+#define CHIP_REV_2_1 0x21
#define CHIP_REV_2_5 0x25
#define CHIP_REV_3_0 0x30
#include <linux/bitops.h>
+#define MHZ(X) ((X) * 1000000UL)
+
enum pll_clocks {
ANATOP_ARM_PLL,
ANATOP_GPU_PLL,
FRAC_PLL_OUT_1600M,
};
+#define DRAM_BYPASS_ROOT_CONFIG(_rate, _m, _p, _s, _k) \
+ { \
+ .clk = (_rate), \
+ .alt_root_sel = (_m), \
+ .alt_pre_div = (_p), \
+ .apb_root_sel = (_s), \
+ .apb_pre_div = (_k), \
+ }
+
+struct dram_bypass_clk_setting {
+ ulong clk;
+ int alt_root_sel;
+ enum root_pre_div alt_pre_div;
+ int apb_root_sel;
+ enum root_pre_div apb_pre_div;
+};
+
+void dram_pll_init(ulong pll_val);
+void dram_enable_bypass(ulong clk_val);
+void dram_disable_bypass(void);
u32 imx_get_fecclk(void);
u32 imx_get_uartclk(void);
int clock_init(void);
* Copyright 2017 NXP
*/
-#ifndef _ASM_ARCH_MX8M_CRM_REGS_H
-#define _ASM_ARCH_MX8M_CRM_REGS_H
+#ifndef _ASM_ARCH_IMX8M_CRM_REGS_H
+#define _ASM_ARCH_IMX8M_CRM_REGS_H
/* Dummy header, some imx-common code needs this file */
#endif
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2017 NXP
+ */
+
+#ifndef __ASM_ARCH_IMX8M_DDR_H
+#define __ASM_ARCH_IMX8M_DDR_H
+
+#include <asm/io.h>
+#include <asm/types.h>
+#include <asm/arch/ddr.h>
+
+#define DDRC_DDR_SS_GPR0 0x3d000000
+#define DDRC_IPS_BASE_ADDR_0 0x3f400000
+#define IP2APB_DDRPHY_IPS_BASE_ADDR(X) (0x3c000000 + (X * 0x2000000))
+#define DDRPHY_MEM(X) (0x3c000000 + (X * 0x2000000) + 0x50000)
+
+struct ddrc_freq {
+ u32 res0[8];
+ u32 derateen;
+ u32 derateint;
+ u32 res1[10];
+ u32 rfshctl0;
+ u32 res2[4];
+ u32 rfshtmg;
+ u32 rfshtmg1;
+ u32 res3[28];
+ u32 init3;
+ u32 init4;
+ u32 res;
+ u32 init6;
+ u32 init7;
+ u32 res4[4];
+ u32 dramtmg0;
+ u32 dramtmg1;
+ u32 dramtmg2;
+ u32 dramtmg3;
+ u32 dramtmg4;
+ u32 dramtmg5;
+ u32 dramtmg6;
+ u32 dramtmg7;
+ u32 dramtmg8;
+ u32 dramtmg9;
+ u32 dramtmg10;
+ u32 dramtmg11;
+ u32 dramtmg12;
+ u32 dramtmg13;
+ u32 dramtmg14;
+ u32 dramtmg15;
+ u32 dramtmg16;
+ u32 dramtmg17;
+ u32 res5[10];
+ u32 mramtmg0;
+ u32 mramtmg1;
+ u32 mramtmg4;
+ u32 mramtmg9;
+ u32 zqctl0;
+ u32 res6[3];
+ u32 dfitmg0;
+ u32 dfitmg1;
+ u32 res7[7];
+ u32 dfitmg2;
+ u32 dfitmg3;
+ u32 res8[33];
+ u32 odtcfg;
+};
+
+struct imx8m_ddrc_regs {
+ u32 mstr;
+ u32 stat;
+ u32 mstr1;
+ u32 res1;
+ u32 mrctrl0;
+ u32 mrctrl1;
+ u32 mrstat;
+ u32 mrctrl2;
+ u32 derateen;
+ u32 derateint;
+ u32 mstr2;
+ u32 res2;
+ u32 pwrctl;
+ u32 pwrtmg;
+ u32 hwlpctl;
+ u32 hwffcctl;
+ u32 hwffcstat;
+ u32 res3[3];
+ u32 rfshctl0;
+ u32 rfshctl1;
+ u32 rfshctl2;
+ u32 rfshctl4;
+ u32 rfshctl3;
+ u32 rfshtmg;
+ u32 rfshtmg1;
+ u32 res4;
+ u32 ecccfg0;
+ u32 ecccfg1;
+ u32 eccstat;
+ u32 eccclr;
+ u32 eccerrcnt;
+ u32 ecccaddr0;
+ u32 ecccaddr1;
+ u32 ecccsyn0;
+ u32 ecccsyn1;
+ u32 ecccsyn2;
+ u32 eccbitmask0;
+ u32 eccbitmask1;
+ u32 eccbitmask2;
+ u32 eccuaddr0;
+ u32 eccuaddr1;
+ u32 eccusyn0;
+ u32 eccusyn1;
+ u32 eccusyn2;
+ u32 eccpoisonaddr0;
+ u32 eccpoisonaddr1;
+ u32 crcparctl0;
+ u32 crcparctl1;
+ u32 crcparctl2;
+ u32 crcparstat;
+ u32 init0;
+ u32 init1;
+ u32 init2;
+ u32 init3;
+ u32 init4;
+ u32 init5;
+ u32 init6;
+ u32 init7;
+ u32 dimmctl;
+ u32 rankctl;
+ u32 res5;
+ u32 chctl;
+ u32 dramtmg0;
+ u32 dramtmg1;
+ u32 dramtmg2;
+ u32 dramtmg3;
+ u32 dramtmg4;
+ u32 dramtmg5;
+ u32 dramtmg6;
+ u32 dramtmg7;
+ u32 dramtmg8;
+ u32 dramtmg9;
+ u32 dramtmg10;
+ u32 dramtmg11;
+ u32 dramtmg12;
+ u32 dramtmg13;
+ u32 dramtmg14;
+ u32 dramtmg15;
+ u32 dramtmg16;
+ u32 dramtmg17;
+ u32 res6[10];
+ u32 mramtmg0;
+ u32 mramtmg1;
+ u32 mramtmg4;
+ u32 mramtmg9;
+ u32 zqctl0;
+ u32 zqctl1;
+ u32 zqctl2;
+ u32 zqstat;
+ u32 dfitmg0;
+ u32 dfitmg1;
+ u32 dfilpcfg0;
+ u32 dfilpcfg1;
+ u32 dfiupd0;
+ u32 dfiupd1;
+ u32 dfiupd2;
+ u32 res7;
+ u32 dfimisc;
+ u32 dfitmg2;
+ u32 dfitmg3;
+ u32 dfistat;
+ u32 dbictl;
+ u32 dfiphymstr;
+ u32 res8[14];
+ u32 addrmap0;
+ u32 addrmap1;
+ u32 addrmap2;
+ u32 addrmap3;
+ u32 addrmap4;
+ u32 addrmap5;
+ u32 addrmap6;
+ u32 addrmap7;
+ u32 addrmap8;
+ u32 addrmap9;
+ u32 addrmap10;
+ u32 addrmap11;
+ u32 res9[4];
+ u32 odtcfg;
+ u32 odtmap;
+ u32 res10[2];
+ u32 sched;
+ u32 sched1;
+ u32 sched2;
+ u32 perfhpr1;
+ u32 res11;
+ u32 perflpr1;
+ u32 res12;
+ u32 perfwr1;
+ u32 res13[4];
+ u32 dqmap0;
+ u32 dqmap1;
+ u32 dqmap2;
+ u32 dqmap3;
+ u32 dqmap4;
+ u32 dqmap5;
+ u32 res14[26];
+ u32 dbg0;
+ u32 dbg1;
+ u32 dbgcam;
+ u32 dbgcmd;
+ u32 dbgstat;
+ u32 res15[3];
+ u32 swctl;
+ u32 swstat;
+ u32 res16[2];
+ u32 ocparcfg0;
+ u32 ocparcfg1;
+ u32 ocparcfg2;
+ u32 ocparcfg3;
+ u32 ocparstat0;
+ u32 ocparstat1;
+ u32 ocparwlog0;
+ u32 ocparwlog1;
+ u32 ocparwlog2;
+ u32 ocparawlog0;
+ u32 ocparawlog1;
+ u32 ocparrlog0;
+ u32 ocparrlog1;
+ u32 ocpararlog0;
+ u32 ocpararlog1;
+ u32 poisoncfg;
+ u32 poisonstat;
+ u32 adveccindex;
+ union {
+ u32 adveccstat;
+ u32 eccapstat;
+ };
+ u32 eccpoisonpat0;
+ u32 eccpoisonpat1;
+ u32 eccpoisonpat2;
+ u32 res17[6];
+ u32 caparpoisonctl;
+ u32 caparpoisonstat;
+ u32 res18[2];
+ u32 dynbsmstat;
+ u32 res19[18];
+ u32 pstat;
+ u32 pccfg;
+ struct {
+ u32 pcfgr;
+ u32 pcfgw;
+ u32 pcfgc;
+ struct {
+ u32 pcfgidmaskch0;
+ u32 pcfidvaluech0;
+ } pcfgid[16];
+ u32 pctrl;
+ u32 pcfgqos0;
+ u32 pcfgqos1;
+ u32 pcfgwqos0;
+ u32 pcfgwqos1;
+ u32 res[4];
+ } pcfg[16];
+ struct {
+ u32 sarbase;
+ u32 sarsize;
+ } sar[4];
+ u32 sbrctl;
+ u32 sbrstat;
+ u32 sbrwdata0;
+ u32 sbrwdata1;
+ u32 pdch;
+ u32 res20[755];
+ /* umctl2_regs_dch1 */
+ u32 ch1_stat;
+ u32 res21[2];
+ u32 ch1_mrctrl0;
+ u32 ch1_mrctrl1;
+ u32 ch1_mrstat;
+ u32 ch1_mrctrl2;
+ u32 res22[4];
+ u32 ch1_pwrctl;
+ u32 ch1_pwrtmg;
+ u32 ch1_hwlpctl;
+ u32 res23[15];
+ u32 ch1_eccstat;
+ u32 ch1_eccclr;
+ u32 ch1_eccerrcnt;
+ u32 ch1_ecccaddr0;
+ u32 ch1_ecccaddr1;
+ u32 ch1_ecccsyn0;
+ u32 ch1_ecccsyn1;
+ u32 ch1_ecccsyn2;
+ u32 ch1_eccbitmask0;
+ u32 ch1_eccbitmask1;
+ u32 ch1_eccbitmask2;
+ u32 ch1_eccuaddr0;
+ u32 ch1_eccuaddr1;
+ u32 ch1_eccusyn0;
+ u32 ch1_eccusyn1;
+ u32 ch1_eccusyn2;
+ u32 res24[2];
+ u32 ch1_crcparctl0;
+ u32 res25[2];
+ u32 ch1_crcparstat;
+ u32 res26[46];
+ u32 ch1_zqctl2;
+ u32 ch1_zqstat;
+ u32 res27[11];
+ u32 ch1_dfistat;
+ u32 res28[33];
+ u32 ch1_odtmap;
+ u32 res29[47];
+ u32 ch1_dbg1;
+ u32 ch1_dbgcam;
+ u32 ch1_dbgcmd;
+ u32 ch1_dbgstat;
+ u32 res30[123];
+ /* umctl2_regs_freq1 */
+ struct ddrc_freq freq1;
+ u32 res31[109];
+ /* umctl2_regs_addrmap_alt */
+ u32 addrmap0_alt;
+ u32 addrmap1_alt;
+ u32 addrmap2_alt;
+ u32 addrmap3_alt;
+ u32 addrmap4_alt;
+ u32 addrmap5_alt;
+ u32 addrmap6_alt;
+ u32 addrmap7_alt;
+ u32 addrmap8_alt;
+ u32 addrmap9_alt;
+ u32 addrmap10_alt;
+ u32 addrmap11_alt;
+ u32 res32[758];
+ /* umctl2_regs_freq2 */
+ struct ddrc_freq freq2;
+ u32 res33[879];
+ /* umctl2_regs_freq3 */
+ struct ddrc_freq freq3;
+};
+
+struct imx8m_ddrphy_regs {
+ u32 reg[0xf0000];
+};
+
+/* PHY State */
+enum pstate {
+ PS0,
+ PS1,
+ PS2,
+ PS3,
+};
+
+enum msg_response {
+ TRAIN_SUCCESS = 0x7,
+ TRAIN_STREAM_START = 0x8,
+ TRAIN_FAIL = 0xff,
+};
+
+#define DDRC_MSTR(X) (DDRC_IPS_BASE_ADDR(X) + 0x00)
+#define DDRC_STAT(X) (DDRC_IPS_BASE_ADDR(X) + 0x04)
+#define DDRC_MSTR1(X) (DDRC_IPS_BASE_ADDR(X) + 0x08)
+#define DDRC_MRCTRL0(X) (DDRC_IPS_BASE_ADDR(X) + 0x10)
+#define DDRC_MRCTRL1(X) (DDRC_IPS_BASE_ADDR(X) + 0x14)
+#define DDRC_MRSTAT(X) (DDRC_IPS_BASE_ADDR(X) + 0x18)
+#define DDRC_MRCTRL2(X) (DDRC_IPS_BASE_ADDR(X) + 0x1c)
+#define DDRC_DERATEEN(X) (DDRC_IPS_BASE_ADDR(X) + 0x20)
+#define DDRC_DERATEINT(X) (DDRC_IPS_BASE_ADDR(X) + 0x24)
+#define DDRC_MSTR2(X) (DDRC_IPS_BASE_ADDR(X) + 0x28)
+#define DDRC_PWRCTL(X) (DDRC_IPS_BASE_ADDR(X) + 0x30)
+#define DDRC_PWRTMG(X) (DDRC_IPS_BASE_ADDR(X) + 0x34)
+#define DDRC_HWLPCTL(X) (DDRC_IPS_BASE_ADDR(X) + 0x38)
+#define DDRC_HWFFCCTL(X) (DDRC_IPS_BASE_ADDR(X) + 0x3c)
+#define DDRC_HWFFCSTAT(X) (DDRC_IPS_BASE_ADDR(X) + 0x40)
+#define DDRC_RFSHCTL0(X) (DDRC_IPS_BASE_ADDR(X) + 0x50)
+#define DDRC_RFSHCTL1(X) (DDRC_IPS_BASE_ADDR(X) + 0x54)
+#define DDRC_RFSHCTL2(X) (DDRC_IPS_BASE_ADDR(X) + 0x58)
+#define DDRC_RFSHCTL3(X) (DDRC_IPS_BASE_ADDR(X) + 0x60)
+#define DDRC_RFSHTMG(X) (DDRC_IPS_BASE_ADDR(X) + 0x64)
+#define DDRC_ECCCFG0(X) (DDRC_IPS_BASE_ADDR(X) + 0x70)
+#define DDRC_ECCCFG1(X) (DDRC_IPS_BASE_ADDR(X) + 0x74)
+#define DDRC_ECCSTAT(X) (DDRC_IPS_BASE_ADDR(X) + 0x78)
+#define DDRC_ECCCLR(X) (DDRC_IPS_BASE_ADDR(X) + 0x7c)
+#define DDRC_ECCERRCNT(X) (DDRC_IPS_BASE_ADDR(X) + 0x80)
+#define DDRC_ECCCADDR0(X) (DDRC_IPS_BASE_ADDR(X) + 0x84)
+#define DDRC_ECCCADDR1(X) (DDRC_IPS_BASE_ADDR(X) + 0x88)
+#define DDRC_ECCCSYN0(X) (DDRC_IPS_BASE_ADDR(X) + 0x8c)
+#define DDRC_ECCCSYN1(X) (DDRC_IPS_BASE_ADDR(X) + 0x90)
+#define DDRC_ECCCSYN2(X) (DDRC_IPS_BASE_ADDR(X) + 0x94)
+#define DDRC_ECCBITMASK0(X) (DDRC_IPS_BASE_ADDR(X) + 0x98)
+#define DDRC_ECCBITMASK1(X) (DDRC_IPS_BASE_ADDR(X) + 0x9c)
+#define DDRC_ECCBITMASK2(X) (DDRC_IPS_BASE_ADDR(X) + 0xa0)
+#define DDRC_ECCUADDR0(X) (DDRC_IPS_BASE_ADDR(X) + 0xa4)
+#define DDRC_ECCUADDR1(X) (DDRC_IPS_BASE_ADDR(X) + 0xa8)
+#define DDRC_ECCUSYN0(X) (DDRC_IPS_BASE_ADDR(X) + 0xac)
+#define DDRC_ECCUSYN1(X) (DDRC_IPS_BASE_ADDR(X) + 0xb0)
+#define DDRC_ECCUSYN2(X) (DDRC_IPS_BASE_ADDR(X) + 0xb4)
+#define DDRC_ECCPOISONADDR0(X) (DDRC_IPS_BASE_ADDR(X) + 0xb8)
+#define DDRC_ECCPOISONADDR1(X) (DDRC_IPS_BASE_ADDR(X) + 0xbc)
+#define DDRC_CRCPARCTL0(X) (DDRC_IPS_BASE_ADDR(X) + 0xc0)
+#define DDRC_CRCPARCTL1(X) (DDRC_IPS_BASE_ADDR(X) + 0xc4)
+#define DDRC_CRCPARCTL2(X) (DDRC_IPS_BASE_ADDR(X) + 0xc8)
+#define DDRC_CRCPARSTAT(X) (DDRC_IPS_BASE_ADDR(X) + 0xcc)
+#define DDRC_INIT0(X) (DDRC_IPS_BASE_ADDR(X) + 0xd0)
+#define DDRC_INIT1(X) (DDRC_IPS_BASE_ADDR(X) + 0xd4)
+#define DDRC_INIT2(X) (DDRC_IPS_BASE_ADDR(X) + 0xd8)
+#define DDRC_INIT3(X) (DDRC_IPS_BASE_ADDR(X) + 0xdc)
+#define DDRC_INIT4(X) (DDRC_IPS_BASE_ADDR(X) + 0xe0)
+#define DDRC_INIT5(X) (DDRC_IPS_BASE_ADDR(X) + 0xe4)
+#define DDRC_INIT6(X) (DDRC_IPS_BASE_ADDR(X) + 0xe8)
+#define DDRC_INIT7(X) (DDRC_IPS_BASE_ADDR(X) + 0xec)
+#define DDRC_DIMMCTL(X) (DDRC_IPS_BASE_ADDR(X) + 0xf0)
+#define DDRC_RANKCTL(X) (DDRC_IPS_BASE_ADDR(X) + 0xf4)
+#define DDRC_DRAMTMG0(X) (DDRC_IPS_BASE_ADDR(X) + 0x100)
+#define DDRC_DRAMTMG1(X) (DDRC_IPS_BASE_ADDR(X) + 0x104)
+#define DDRC_DRAMTMG2(X) (DDRC_IPS_BASE_ADDR(X) + 0x108)
+#define DDRC_DRAMTMG3(X) (DDRC_IPS_BASE_ADDR(X) + 0x10c)
+#define DDRC_DRAMTMG4(X) (DDRC_IPS_BASE_ADDR(X) + 0x110)
+#define DDRC_DRAMTMG5(X) (DDRC_IPS_BASE_ADDR(X) + 0x114)
+#define DDRC_DRAMTMG6(X) (DDRC_IPS_BASE_ADDR(X) + 0x118)
+#define DDRC_DRAMTMG7(X) (DDRC_IPS_BASE_ADDR(X) + 0x11c)
+#define DDRC_DRAMTMG8(X) (DDRC_IPS_BASE_ADDR(X) + 0x120)
+#define DDRC_DRAMTMG9(X) (DDRC_IPS_BASE_ADDR(X) + 0x124)
+#define DDRC_DRAMTMG10(X) (DDRC_IPS_BASE_ADDR(X) + 0x128)
+#define DDRC_DRAMTMG11(X) (DDRC_IPS_BASE_ADDR(X) + 0x12c)
+#define DDRC_DRAMTMG12(X) (DDRC_IPS_BASE_ADDR(X) + 0x130)
+#define DDRC_DRAMTMG13(X) (DDRC_IPS_BASE_ADDR(X) + 0x134)
+#define DDRC_DRAMTMG14(X) (DDRC_IPS_BASE_ADDR(X) + 0x138)
+#define DDRC_DRAMTMG15(X) (DDRC_IPS_BASE_ADDR(X) + 0x13C)
+#define DDRC_DRAMTMG16(X) (DDRC_IPS_BASE_ADDR(X) + 0x140)
+#define DDRC_DRAMTMG17(X) (DDRC_IPS_BASE_ADDR(X) + 0x144)
+#define DDRC_ZQCTL0(X) (DDRC_IPS_BASE_ADDR(X) + 0x180)
+#define DDRC_ZQCTL1(X) (DDRC_IPS_BASE_ADDR(X) + 0x184)
+#define DDRC_ZQCTL2(X) (DDRC_IPS_BASE_ADDR(X) + 0x188)
+#define DDRC_ZQSTAT(X) (DDRC_IPS_BASE_ADDR(X) + 0x18c)
+#define DDRC_DFITMG0(X) (DDRC_IPS_BASE_ADDR(X) + 0x190)
+#define DDRC_DFITMG1(X) (DDRC_IPS_BASE_ADDR(X) + 0x194)
+#define DDRC_DFILPCFG0(X) (DDRC_IPS_BASE_ADDR(X) + 0x198)
+#define DDRC_DFILPCFG1(X) (DDRC_IPS_BASE_ADDR(X) + 0x19c)
+#define DDRC_DFIUPD0(X) (DDRC_IPS_BASE_ADDR(X) + 0x1a0)
+#define DDRC_DFIUPD1(X) (DDRC_IPS_BASE_ADDR(X) + 0x1a4)
+#define DDRC_DFIUPD2(X) (DDRC_IPS_BASE_ADDR(X) + 0x1a8)
+#define DDRC_DFIMISC(X) (DDRC_IPS_BASE_ADDR(X) + 0x1b0)
+#define DDRC_DFITMG2(X) (DDRC_IPS_BASE_ADDR(X) + 0x1b4)
+#define DDRC_DFITMG3(X) (DDRC_IPS_BASE_ADDR(X) + 0x1b8)
+#define DDRC_DFISTAT(X) (DDRC_IPS_BASE_ADDR(X) + 0x1bc)
+#define DDRC_DBICTL(X) (DDRC_IPS_BASE_ADDR(X) + 0x1c0)
+#define DDRC_DFIPHYMSTR(X) (DDRC_IPS_BASE_ADDR(X) + 0x1c4)
+#define DDRC_TRAINCTL0(X) (DDRC_IPS_BASE_ADDR(X) + 0x1d0)
+#define DDRC_TRAINCTL1(X) (DDRC_IPS_BASE_ADDR(X) + 0x1d4)
+#define DDRC_TRAINCTL2(X) (DDRC_IPS_BASE_ADDR(X) + 0x1d8)
+#define DDRC_TRAINSTAT(X) (DDRC_IPS_BASE_ADDR(X) + 0x1dc)
+#define DDRC_ADDRMAP0(X) (DDRC_IPS_BASE_ADDR(X) + 0x200)
+#define DDRC_ADDRMAP1(X) (DDRC_IPS_BASE_ADDR(X) + 0x204)
+#define DDRC_ADDRMAP2(X) (DDRC_IPS_BASE_ADDR(X) + 0x208)
+#define DDRC_ADDRMAP3(X) (DDRC_IPS_BASE_ADDR(X) + 0x20c)
+#define DDRC_ADDRMAP4(X) (DDRC_IPS_BASE_ADDR(X) + 0x210)
+#define DDRC_ADDRMAP5(X) (DDRC_IPS_BASE_ADDR(X) + 0x214)
+#define DDRC_ADDRMAP6(X) (DDRC_IPS_BASE_ADDR(X) + 0x218)
+#define DDRC_ADDRMAP7(X) (DDRC_IPS_BASE_ADDR(X) + 0x21c)
+#define DDRC_ADDRMAP8(X) (DDRC_IPS_BASE_ADDR(X) + 0x220)
+#define DDRC_ADDRMAP9(X) (DDRC_IPS_BASE_ADDR(X) + 0x224)
+#define DDRC_ADDRMAP10(X) (DDRC_IPS_BASE_ADDR(X) + 0x228)
+#define DDRC_ADDRMAP11(X) (DDRC_IPS_BASE_ADDR(X) + 0x22c)
+#define DDRC_ODTCFG(X) (DDRC_IPS_BASE_ADDR(X) + 0x240)
+#define DDRC_ODTMAP(X) (DDRC_IPS_BASE_ADDR(X) + 0x244)
+#define DDRC_SCHED(X) (DDRC_IPS_BASE_ADDR(X) + 0x250)
+#define DDRC_SCHED1(X) (DDRC_IPS_BASE_ADDR(X) + 0x254)
+#define DDRC_PERFHPR1(X) (DDRC_IPS_BASE_ADDR(X) + 0x25c)
+#define DDRC_PERFLPR1(X) (DDRC_IPS_BASE_ADDR(X) + 0x264)
+#define DDRC_PERFWR1(X) (DDRC_IPS_BASE_ADDR(X) + 0x26c)
+#define DDRC_PERFVPR1(X) (DDRC_IPS_BASE_ADDR(X) + 0x274)
+#define DDRC_PERFVPW1(X) (DDRC_IPS_BASE_ADDR(X) + 0x278)
+#define DDRC_DQMAP0(X) (DDRC_IPS_BASE_ADDR(X) + 0x280)
+#define DDRC_DQMAP1(X) (DDRC_IPS_BASE_ADDR(X) + 0x284)
+#define DDRC_DQMAP2(X) (DDRC_IPS_BASE_ADDR(X) + 0x288)
+#define DDRC_DQMAP3(X) (DDRC_IPS_BASE_ADDR(X) + 0x28c)
+#define DDRC_DQMAP4(X) (DDRC_IPS_BASE_ADDR(X) + 0x290)
+#define DDRC_DQMAP5(X) (DDRC_IPS_BASE_ADDR(X) + 0x294)
+#define DDRC_DBG0(X) (DDRC_IPS_BASE_ADDR(X) + 0x300)
+#define DDRC_DBG1(X) (DDRC_IPS_BASE_ADDR(X) + 0x304)
+#define DDRC_DBGCAM(X) (DDRC_IPS_BASE_ADDR(X) + 0x308)
+#define DDRC_DBGCMD(X) (DDRC_IPS_BASE_ADDR(X) + 0x30c)
+#define DDRC_DBGSTAT(X) (DDRC_IPS_BASE_ADDR(X) + 0x310)
+#define DDRC_SWCTL(X) (DDRC_IPS_BASE_ADDR(X) + 0x320)
+#define DDRC_SWSTAT(X) (DDRC_IPS_BASE_ADDR(X) + 0x324)
+#define DDRC_OCPARCFG0(X) (DDRC_IPS_BASE_ADDR(X) + 0x330)
+#define DDRC_OCPARCFG1(X) (DDRC_IPS_BASE_ADDR(X) + 0x334)
+#define DDRC_OCPARCFG2(X) (DDRC_IPS_BASE_ADDR(X) + 0x338)
+#define DDRC_OCPARCFG3(X) (DDRC_IPS_BASE_ADDR(X) + 0x33c)
+#define DDRC_OCPARSTAT0(X) (DDRC_IPS_BASE_ADDR(X) + 0x340)
+#define DDRC_OCPARSTAT1(X) (DDRC_IPS_BASE_ADDR(X) + 0x344)
+#define DDRC_OCPARWLOG0(X) (DDRC_IPS_BASE_ADDR(X) + 0x348)
+#define DDRC_OCPARWLOG1(X) (DDRC_IPS_BASE_ADDR(X) + 0x34c)
+#define DDRC_OCPARWLOG2(X) (DDRC_IPS_BASE_ADDR(X) + 0x350)
+#define DDRC_OCPARAWLOG0(X) (DDRC_IPS_BASE_ADDR(X) + 0x354)
+#define DDRC_OCPARAWLOG1(X) (DDRC_IPS_BASE_ADDR(X) + 0x358)
+#define DDRC_OCPARRLOG0(X) (DDRC_IPS_BASE_ADDR(X) + 0x35c)
+#define DDRC_OCPARRLOG1(X) (DDRC_IPS_BASE_ADDR(X) + 0x360)
+#define DDRC_OCPARARLOG0(X) (DDRC_IPS_BASE_ADDR(X) + 0x364)
+#define DDRC_OCPARARLOG1(X) (DDRC_IPS_BASE_ADDR(X) + 0x368)
+#define DDRC_POISONCFG(X) (DDRC_IPS_BASE_ADDR(X) + 0x36C)
+#define DDRC_POISONSTAT(X) (DDRC_IPS_BASE_ADDR(X) + 0x370)
+
+#define DDRC_PSTAT(X) (DDRC_IPS_BASE_ADDR(X) + 0x3fc)
+#define DDRC_PCCFG(X) (DDRC_IPS_BASE_ADDR(X) + 0x400)
+#define DDRC_PCFGR_0(X) (DDRC_IPS_BASE_ADDR(X) + 0x404)
+#define DDRC_PCFGR_1(X) (DDRC_IPS_BASE_ADDR(X) + 1 * 0xb0 + 0x404)
+#define DDRC_PCFGR_2(X) (DDRC_IPS_BASE_ADDR(X) + 2 * 0xb0 + 0x404)
+#define DDRC_PCFGR_3(X) (DDRC_IPS_BASE_ADDR(X) + 3 * 0xb0 + 0x404)
+#define DDRC_PCFGW_0(X) (DDRC_IPS_BASE_ADDR(X) + 0x408)
+#define DDRC_PCFGW_1(X) (DDRC_IPS_BASE_ADDR(X) + 1 * 0xb0 + 0x408)
+#define DDRC_PCFGW_2(X) (DDRC_IPS_BASE_ADDR(X) + 2 * 0xb0 + 0x408)
+#define DDRC_PCFGW_3(X) (DDRC_IPS_BASE_ADDR(X) + 3 * 0xb0 + 0x408)
+#define DDRC_PCFGC_0(X) (DDRC_IPS_BASE_ADDR(X) + 0x40c)
+#define DDRC_PCFGIDMASKCH(X) (DDRC_IPS_BASE_ADDR(X) + 0x410)
+#define DDRC_PCFGIDVALUECH(X) (DDRC_IPS_BASE_ADDR(X) + 0x414)
+#define DDRC_PCTRL_0(X) (DDRC_IPS_BASE_ADDR(X) + 0x490)
+#define DDRC_PCTRL_1(X) (DDRC_IPS_BASE_ADDR(X) + 0x490 + 1 * 0xb0)
+#define DDRC_PCTRL_2(X) (DDRC_IPS_BASE_ADDR(X) + 0x490 + 2 * 0xb0)
+#define DDRC_PCTRL_3(X) (DDRC_IPS_BASE_ADDR(X) + 0x490 + 3 * 0xb0)
+#define DDRC_PCFGQOS0_0(X) (DDRC_IPS_BASE_ADDR(X) + 0x494)
+#define DDRC_PCFGQOS1_0(X) (DDRC_IPS_BASE_ADDR(X) + 0x498)
+#define DDRC_PCFGWQOS0_0(X) (DDRC_IPS_BASE_ADDR(X) + 0x49c)
+#define DDRC_PCFGWQOS1_0(X) (DDRC_IPS_BASE_ADDR(X) + 0x4a0)
+#define DDRC_SARBASE0(X) (DDRC_IPS_BASE_ADDR(X) + 0xf04)
+#define DDRC_SARSIZE0(X) (DDRC_IPS_BASE_ADDR(X) + 0xf08)
+#define DDRC_SBRCTL(X) (DDRC_IPS_BASE_ADDR(X) + 0xf24)
+#define DDRC_SBRSTAT(X) (DDRC_IPS_BASE_ADDR(X) + 0xf28)
+#define DDRC_SBRWDATA0(X) (DDRC_IPS_BASE_ADDR(X) + 0xf2c)
+#define DDRC_SBRWDATA1(X) (DDRC_IPS_BASE_ADDR(X) + 0xf30)
+#define DDRC_PDCH(X) (DDRC_IPS_BASE_ADDR(X) + 0xf34)
+
+#define DDRC_FREQ1_DERATEEN(X) (DDRC_IPS_BASE_ADDR(X) + 0x2020)
+#define DDRC_FREQ1_DERATEINT(X) (DDRC_IPS_BASE_ADDR(X) + 0x2024)
+#define DDRC_FREQ1_RFSHCTL0(X) (DDRC_IPS_BASE_ADDR(X) + 0x2050)
+#define DDRC_FREQ1_RFSHTMG(X) (DDRC_IPS_BASE_ADDR(X) + 0x2064)
+#define DDRC_FREQ1_INIT3(X) (DDRC_IPS_BASE_ADDR(X) + 0x20dc)
+#define DDRC_FREQ1_INIT4(X) (DDRC_IPS_BASE_ADDR(X) + 0x20e0)
+#define DDRC_FREQ1_INIT6(X) (DDRC_IPS_BASE_ADDR(X) + 0x20e8)
+#define DDRC_FREQ1_INIT7(X) (DDRC_IPS_BASE_ADDR(X) + 0x20ec)
+#define DDRC_FREQ1_DRAMTMG0(X) (DDRC_IPS_BASE_ADDR(X) + 0x2100)
+#define DDRC_FREQ1_DRAMTMG1(X) (DDRC_IPS_BASE_ADDR(X) + 0x2104)
+#define DDRC_FREQ1_DRAMTMG2(X) (DDRC_IPS_BASE_ADDR(X) + 0x2108)
+#define DDRC_FREQ1_DRAMTMG3(X) (DDRC_IPS_BASE_ADDR(X) + 0x210c)
+#define DDRC_FREQ1_DRAMTMG4(X) (DDRC_IPS_BASE_ADDR(X) + 0x2110)
+#define DDRC_FREQ1_DRAMTMG5(X) (DDRC_IPS_BASE_ADDR(X) + 0x2114)
+#define DDRC_FREQ1_DRAMTMG6(X) (DDRC_IPS_BASE_ADDR(X) + 0x2118)
+#define DDRC_FREQ1_DRAMTMG7(X) (DDRC_IPS_BASE_ADDR(X) + 0x211c)
+#define DDRC_FREQ1_DRAMTMG8(X) (DDRC_IPS_BASE_ADDR(X) + 0x2120)
+#define DDRC_FREQ1_DRAMTMG9(X) (DDRC_IPS_BASE_ADDR(X) + 0x2124)
+#define DDRC_FREQ1_DRAMTMG10(X) (DDRC_IPS_BASE_ADDR(X) + 0x2128)
+#define DDRC_FREQ1_DRAMTMG11(X) (DDRC_IPS_BASE_ADDR(X) + 0x212c)
+#define DDRC_FREQ1_DRAMTMG12(X) (DDRC_IPS_BASE_ADDR(X) + 0x2130)
+#define DDRC_FREQ1_DRAMTMG13(X) (DDRC_IPS_BASE_ADDR(X) + 0x2134)
+#define DDRC_FREQ1_DRAMTMG14(X) (DDRC_IPS_BASE_ADDR(X) + 0x2138)
+#define DDRC_FREQ1_DRAMTMG15(X) (DDRC_IPS_BASE_ADDR(X) + 0x213C)
+#define DDRC_FREQ1_DRAMTMG16(X) (DDRC_IPS_BASE_ADDR(X) + 0x2140)
+#define DDRC_FREQ1_DRAMTMG17(X) (DDRC_IPS_BASE_ADDR(X) + 0x2144)
+#define DDRC_FREQ1_ZQCTL0(X) (DDRC_IPS_BASE_ADDR(X) + 0x2180)
+#define DDRC_FREQ1_DFITMG0(X) (DDRC_IPS_BASE_ADDR(X) + 0x2190)
+#define DDRC_FREQ1_DFITMG1(X) (DDRC_IPS_BASE_ADDR(X) + 0x2194)
+#define DDRC_FREQ1_DFITMG2(X) (DDRC_IPS_BASE_ADDR(X) + 0x21b4)
+#define DDRC_FREQ1_DFITMG3(X) (DDRC_IPS_BASE_ADDR(X) + 0x21b8)
+#define DDRC_FREQ1_ODTCFG(X) (DDRC_IPS_BASE_ADDR(X) + 0x2240)
+
+#define DDRC_FREQ2_DERATEEN(X) (DDRC_IPS_BASE_ADDR(X) + 0x3020)
+#define DDRC_FREQ2_DERATEINT(X) (DDRC_IPS_BASE_ADDR(X) + 0x3024)
+#define DDRC_FREQ2_RFSHCTL0(X) (DDRC_IPS_BASE_ADDR(X) + 0x3050)
+#define DDRC_FREQ2_RFSHTMG(X) (DDRC_IPS_BASE_ADDR(X) + 0x3064)
+#define DDRC_FREQ2_INIT3(X) (DDRC_IPS_BASE_ADDR(X) + 0x30dc)
+#define DDRC_FREQ2_INIT4(X) (DDRC_IPS_BASE_ADDR(X) + 0x30e0)
+#define DDRC_FREQ2_INIT6(X) (DDRC_IPS_BASE_ADDR(X) + 0x30e8)
+#define DDRC_FREQ2_INIT7(X) (DDRC_IPS_BASE_ADDR(X) + 0x30ec)
+#define DDRC_FREQ2_DRAMTMG0(X) (DDRC_IPS_BASE_ADDR(X) + 0x3100)
+#define DDRC_FREQ2_DRAMTMG1(X) (DDRC_IPS_BASE_ADDR(X) + 0x3104)
+#define DDRC_FREQ2_DRAMTMG2(X) (DDRC_IPS_BASE_ADDR(X) + 0x3108)
+#define DDRC_FREQ2_DRAMTMG3(X) (DDRC_IPS_BASE_ADDR(X) + 0x310c)
+#define DDRC_FREQ2_DRAMTMG4(X) (DDRC_IPS_BASE_ADDR(X) + 0x3110)
+#define DDRC_FREQ2_DRAMTMG5(X) (DDRC_IPS_BASE_ADDR(X) + 0x3114)
+#define DDRC_FREQ2_DRAMTMG6(X) (DDRC_IPS_BASE_ADDR(X) + 0x3118)
+#define DDRC_FREQ2_DRAMTMG7(X) (DDRC_IPS_BASE_ADDR(X) + 0x311c)
+#define DDRC_FREQ2_DRAMTMG8(X) (DDRC_IPS_BASE_ADDR(X) + 0x3120)
+#define DDRC_FREQ2_DRAMTMG9(X) (DDRC_IPS_BASE_ADDR(X) + 0x3124)
+#define DDRC_FREQ2_DRAMTMG10(X) (DDRC_IPS_BASE_ADDR(X) + 0x3128)
+#define DDRC_FREQ2_DRAMTMG11(X) (DDRC_IPS_BASE_ADDR(X) + 0x312c)
+#define DDRC_FREQ2_DRAMTMG12(X) (DDRC_IPS_BASE_ADDR(X) + 0x3130)
+#define DDRC_FREQ2_DRAMTMG13(X) (DDRC_IPS_BASE_ADDR(X) + 0x3134)
+#define DDRC_FREQ2_DRAMTMG14(X) (DDRC_IPS_BASE_ADDR(X) + 0x3138)
+#define DDRC_FREQ2_DRAMTMG15(X) (DDRC_IPS_BASE_ADDR(X) + 0x313C)
+#define DDRC_FREQ2_DRAMTMG16(X) (DDRC_IPS_BASE_ADDR(X) + 0x3140)
+#define DDRC_FREQ2_DRAMTMG17(X) (DDRC_IPS_BASE_ADDR(X) + 0x3144)
+#define DDRC_FREQ2_ZQCTL0(X) (DDRC_IPS_BASE_ADDR(X) + 0x3180)
+#define DDRC_FREQ2_DFITMG0(X) (DDRC_IPS_BASE_ADDR(X) + 0x3190)
+#define DDRC_FREQ2_DFITMG1(X) (DDRC_IPS_BASE_ADDR(X) + 0x3194)
+#define DDRC_FREQ2_DFITMG2(X) (DDRC_IPS_BASE_ADDR(X) + 0x31b4)
+#define DDRC_FREQ2_DFITMG3(X) (DDRC_IPS_BASE_ADDR(X) + 0x31b8)
+#define DDRC_FREQ2_ODTCFG(X) (DDRC_IPS_BASE_ADDR(X) + 0x3240)
+
+#define DDRC_FREQ3_DERATEEN(X) (DDRC_IPS_BASE_ADDR(X) + 0x4020)
+#define DDRC_FREQ3_DERATEINT(X) (DDRC_IPS_BASE_ADDR(X) + 0x4024)
+#define DDRC_FREQ3_RFSHCTL0(X) (DDRC_IPS_BASE_ADDR(X) + 0x4050)
+#define DDRC_FREQ3_RFSHTMG(X) (DDRC_IPS_BASE_ADDR(X) + 0x4064)
+#define DDRC_FREQ3_INIT3(X) (DDRC_IPS_BASE_ADDR(X) + 0x40dc)
+#define DDRC_FREQ3_INIT4(X) (DDRC_IPS_BASE_ADDR(X) + 0x40e0)
+#define DDRC_FREQ3_INIT6(X) (DDRC_IPS_BASE_ADDR(X) + 0x40e8)
+#define DDRC_FREQ3_INIT7(X) (DDRC_IPS_BASE_ADDR(X) + 0x40ec)
+#define DDRC_FREQ3_DRAMTMG0(X) (DDRC_IPS_BASE_ADDR(X) + 0x4100)
+#define DDRC_FREQ3_DRAMTMG1(X) (DDRC_IPS_BASE_ADDR(X) + 0x4104)
+#define DDRC_FREQ3_DRAMTMG2(X) (DDRC_IPS_BASE_ADDR(X) + 0x4108)
+#define DDRC_FREQ3_DRAMTMG3(X) (DDRC_IPS_BASE_ADDR(X) + 0x410c)
+#define DDRC_FREQ3_DRAMTMG4(X) (DDRC_IPS_BASE_ADDR(X) + 0x4110)
+#define DDRC_FREQ3_DRAMTMG5(X) (DDRC_IPS_BASE_ADDR(X) + 0x4114)
+#define DDRC_FREQ3_DRAMTMG6(X) (DDRC_IPS_BASE_ADDR(X) + 0x4118)
+#define DDRC_FREQ3_DRAMTMG7(X) (DDRC_IPS_BASE_ADDR(X) + 0x411c)
+#define DDRC_FREQ3_DRAMTMG8(X) (DDRC_IPS_BASE_ADDR(X) + 0x4120)
+#define DDRC_FREQ3_DRAMTMG9(X) (DDRC_IPS_BASE_ADDR(X) + 0x4124)
+#define DDRC_FREQ3_DRAMTMG10(X) (DDRC_IPS_BASE_ADDR(X) + 0x4128)
+#define DDRC_FREQ3_DRAMTMG11(X) (DDRC_IPS_BASE_ADDR(X) + 0x412c)
+#define DDRC_FREQ3_DRAMTMG12(X) (DDRC_IPS_BASE_ADDR(X) + 0x4130)
+#define DDRC_FREQ3_DRAMTMG13(X) (DDRC_IPS_BASE_ADDR(X) + 0x4134)
+#define DDRC_FREQ3_DRAMTMG14(X) (DDRC_IPS_BASE_ADDR(X) + 0x4138)
+#define DDRC_FREQ3_DRAMTMG15(X) (DDRC_IPS_BASE_ADDR(X) + 0x413C)
+#define DDRC_FREQ3_DRAMTMG16(X) (DDRC_IPS_BASE_ADDR(X) + 0x4140)
+
+#define DDRC_FREQ3_ZQCTL0(X) (DDRC_IPS_BASE_ADDR(X) + 0x4180)
+#define DDRC_FREQ3_DFITMG0(X) (DDRC_IPS_BASE_ADDR(X) + 0x4190)
+#define DDRC_FREQ3_DFITMG1(X) (DDRC_IPS_BASE_ADDR(X) + 0x4194)
+#define DDRC_FREQ3_DFITMG2(X) (DDRC_IPS_BASE_ADDR(X) + 0x41b4)
+#define DDRC_FREQ3_DFITMG3(X) (DDRC_IPS_BASE_ADDR(X) + 0x41b8)
+#define DDRC_FREQ3_ODTCFG(X) (DDRC_IPS_BASE_ADDR(X) + 0x4240)
+#define DDRC_DFITMG0_SHADOW(X) (DDRC_IPS_BASE_ADDR(X) + 0x2190)
+#define DDRC_DFITMG1_SHADOW(X) (DDRC_IPS_BASE_ADDR(X) + 0x2194)
+#define DDRC_DFITMG2_SHADOW(X) (DDRC_IPS_BASE_ADDR(X) + 0x21b4)
+#define DDRC_DFITMG3_SHADOW(X) (DDRC_IPS_BASE_ADDR(X) + 0x21b8)
+#define DDRC_ODTCFG_SHADOW(X) (DDRC_IPS_BASE_ADDR(X) + 0x2240)
+
+#define DDRPHY_CalBusy(X) (IP2APB_DDRPHY_IPS_BASE_ADDR(X) + 4 * 0x020097)
+
+#define DRC_PERF_MON_BASE_ADDR(X) (0x3d800000 + ((X) * 0x2000000))
+#define DRC_PERF_MON_CNT0_CTL(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x0)
+#define DRC_PERF_MON_CNT1_CTL(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x4)
+#define DRC_PERF_MON_CNT2_CTL(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x8)
+#define DRC_PERF_MON_CNT3_CTL(X) (DRC_PERF_MON_BASE_ADDR(X) + 0xC)
+#define DRC_PERF_MON_CNT0_DAT(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x20)
+#define DRC_PERF_MON_CNT1_DAT(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x24)
+#define DRC_PERF_MON_CNT2_DAT(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x28)
+#define DRC_PERF_MON_CNT3_DAT(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x2C)
+#define DRC_PERF_MON_MRR0_DAT(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x40)
+#define DRC_PERF_MON_MRR1_DAT(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x44)
+#define DRC_PERF_MON_MRR2_DAT(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x48)
+#define DRC_PERF_MON_MRR3_DAT(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x4C)
+#define DRC_PERF_MON_MRR4_DAT(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x50)
+#define DRC_PERF_MON_MRR5_DAT(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x54)
+#define DRC_PERF_MON_MRR6_DAT(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x58)
+#define DRC_PERF_MON_MRR7_DAT(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x5C)
+#define DRC_PERF_MON_MRR8_DAT(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x60)
+#define DRC_PERF_MON_MRR9_DAT(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x64)
+#define DRC_PERF_MON_MRR10_DAT(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x68)
+#define DRC_PERF_MON_MRR11_DAT(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x6C)
+#define DRC_PERF_MON_MRR12_DAT(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x70)
+#define DRC_PERF_MON_MRR13_DAT(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x74)
+#define DRC_PERF_MON_MRR14_DAT(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x78)
+#define DRC_PERF_MON_MRR15_DAT(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x7C)
+
+/* user data type */
+enum fw_type {
+ FW_1D_IMAGE,
+ FW_2D_IMAGE,
+};
+
+struct dram_cfg_param {
+ unsigned int reg;
+ unsigned int val;
+};
+
+struct dram_fsp_msg {
+ unsigned int drate;
+ enum fw_type fw_type;
+ struct dram_cfg_param *fsp_cfg;
+ unsigned int fsp_cfg_num;
+};
+
+struct dram_timing_info {
+ /* umctl2 config */
+ struct dram_cfg_param *ddrc_cfg;
+ unsigned int ddrc_cfg_num;
+ /* ddrphy config */
+ struct dram_cfg_param *ddrphy_cfg;
+ unsigned int ddrphy_cfg_num;
+ /* ddr fsp train info */
+ struct dram_fsp_msg *fsp_msg;
+ unsigned int fsp_msg_num;
+ /* ddr phy trained CSR */
+ struct dram_cfg_param *ddrphy_trained_csr;
+ unsigned int ddrphy_trained_csr_num;
+ /* ddr phy PIE */
+ struct dram_cfg_param *ddrphy_pie;
+ unsigned int ddrphy_pie_num;
+ /* initialized drate table */
+ unsigned int fsp_table[4];
+};
+
+extern struct dram_timing_info dram_timing;
+
+void ddr_load_train_firmware(enum fw_type type);
+void ddr_init(struct dram_timing_info *timing_info);
+void ddr_cfg_phy(struct dram_timing_info *timing_info);
+void load_lpddr4_phy_pie(void);
+void ddrphy_trained_csr_save(struct dram_cfg_param *param, unsigned int num);
+void dram_config_save(struct dram_timing_info *info, unsigned long base);
+
+/* utils function for ddr phy training */
+void wait_ddrphy_training_complete(void);
+void ddrphy_init_set_dfi_clk(unsigned int drate);
+void ddrphy_init_read_msg_block(enum fw_type type);
+
+static inline void reg32_write(unsigned long addr, u32 val)
+{
+ writel(val, addr);
+}
+
+static inline u32 reg32_read(unsigned long addr)
+{
+ return readl(addr);
+}
+
+static inline void reg32setbit(unsigned long addr, u32 bit)
+{
+ setbits_le32(addr, (1 << bit));
+}
+
+#define dwc_ddrphy_apb_wr(addr, data) \
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * (addr), data)
+#define dwc_ddrphy_apb_rd(addr) \
+ reg32_read(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * (addr))
+
+extern struct dram_cfg_param ddrphy_trained_csr[];
+extern uint32_t ddrphy_trained_csr_num;
+
+#endif
* Copyright 2017 NXP
*/
-#ifndef __ASM_ARCH_MX8M_GPIO_H
-#define __ASM_ARCH_MX8M_GPIO_H
+#ifndef __ASM_ARCH_IMX8M_GPIO_H
+#define __ASM_ARCH_IMX8M_GPIO_H
#include <asm/mach-imx/gpio.h>
* Copyright 2017 NXP
*/
-#ifndef __ASM_ARCH_MX8M_REGS_H__
-#define __ASM_ARCH_MX8M_REGS_H__
+#ifndef __ASM_ARCH_IMX8M_REGS_H__
+#define __ASM_ARCH_IMX8M_REGS_H__
#include <asm/mach-imx/regs-lcdif.h>
* Copyright (C) 2017 NXP
*/
-#ifndef __ASM_ARCH_MX8MQ_PINS_H__
-#define __ASM_ARCH_MX8MQ_PINS_H__
+#ifndef __ASM_ARCH_IMX8MQ_PINS_H__
+#define __ASM_ARCH_IMX8MQ_PINS_H__
#include <asm/mach-imx/iomux-v3.h>
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ */
+
+#ifndef __LPDDR4_DEFINE_H_
+#define __LPDDR4_DEFINE_H_
+
+#define LPDDR4_DVFS_DBI
+#define DDR_ONE_RANK
+/* #define LPDDR4_DBI_ON */
+#define DFI_BUG_WR
+#define M845S_4GBx2
+#define PRETRAIN
+
+/* DRAM MR setting */
+#ifdef LPDDR4_DBI_ON
+#define LPDDR4_MR3 0xf1
+#define LPDDR4_PHY_DMIPinPresent 0x1
+#else
+#define LPDDR4_MR3 0x31
+#define LPDDR4_PHY_DMIPinPresent 0x0
+#endif
+
+#ifdef DDR_ONE_RANK
+#define LPDDR4_CS 0x1
+#else
+#define LPDDR4_CS 0x3
+#endif
+
+/* PHY training feature */
+#define LPDDR4_HDT_CTL_2D 0xC8
+#define LPDDR4_HDT_CTL_3200_1D 0xC8
+#define LPDDR4_HDT_CTL_400_1D 0xC8
+#define LPDDR4_HDT_CTL_100_1D 0xC8
+
+/* 400/100 training seq */
+#define LPDDR4_TRAIN_SEQ_P2 0x121f
+#define LPDDR4_TRAIN_SEQ_P1 0x121f
+#define LPDDR4_TRAIN_SEQ_P0 0x121f
+#define LPDDR4_TRAIN_SEQ_100 0x121f
+#define LPDDR4_TRAIN_SEQ_400 0x121f
+
+/* 2D share & weight */
+#define LPDDR4_2D_WEIGHT 0x1f7f
+#define LPDDR4_2D_SHARE 1
+#define LPDDR4_CATRAIN_3200_1d 0
+#define LPDDR4_CATRAIN_400 0
+#define LPDDR4_CATRAIN_100 0
+#define LPDDR4_CATRAIN_3200_2d 0
+
+/* MRS parameter */
+/* for LPDDR4 Rtt */
+#define LPDDR4_RTT40 6
+#define LPDDR4_RTT48 5
+#define LPDDR4_RTT60 4
+#define LPDDR4_RTT80 3
+#define LPDDR4_RTT120 2
+#define LPDDR4_RTT240 1
+#define LPDDR4_RTT_DIS 0
+
+/* for LPDDR4 Ron */
+#define LPDDR4_RON34 7
+#define LPDDR4_RON40 6
+#define LPDDR4_RON48 5
+#define LPDDR4_RON60 4
+#define LPDDR4_RON80 3
+
+#define LPDDR4_PHY_ADDR_RON60 0x1
+#define LPDDR4_PHY_ADDR_RON40 0x3
+#define LPDDR4_PHY_ADDR_RON30 0x7
+#define LPDDR4_PHY_ADDR_RON24 0xf
+#define LPDDR4_PHY_ADDR_RON20 0x1f
+
+/* for read channel */
+#define LPDDR4_RON LPDDR4_RON40
+#define LPDDR4_PHY_RTT 30
+#define LPDDR4_PHY_VREF_VALUE 17
+
+/* for write channel */
+#define LPDDR4_PHY_RON 30
+#define LPDDR4_PHY_ADDR_RON LPDDR4_PHY_ADDR_RON40
+#define LPDDR4_RTT_DQ LPDDR4_RTT40
+#define LPDDR4_RTT_CA LPDDR4_RTT40
+#define LPDDR4_RTT_CA_BANK0 LPDDR4_RTT40
+#define LPDDR4_RTT_CA_BANK1 LPDDR4_RTT40
+#define LPDDR4_VREF_VALUE_CA ((1 << 6) | (0xd))
+#define LPDDR4_VREF_VALUE_DQ_RANK0 ((1 << 6) | (0xd))
+#define LPDDR4_VREF_VALUE_DQ_RANK1 ((1 << 6) | (0xd))
+#define LPDDR4_MR22_RANK0 ((0 << 5) | (1 << 4) | (0 << 3) | \
+ (LPDDR4_RTT40))
+#define LPDDR4_MR22_RANK1 ((1 << 5) | (1 << 4) | (1 << 3) | \
+ (LPDDR4_RTT40))
+
+#define LPDDR4_MR3_PU_CAL 1
+
+#endif /* __LPDDR4_DEFINE_H__ */
* Copyright (C) 2017 NXP
*/
-#ifndef __ARCH_MX8M_SYS_PROTO_H
-#define __ARCH_MX8M_SYS_PROTO_H
+#ifndef __ARCH_IMX8M_SYS_PROTO_H
+#define __ARCH_NMX8M_SYS_PROTO_H
#include <asm/mach-imx/sys_proto.h>
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2017 NXP
- */
-
-#ifndef __ASM_ARCH_MX8M_DDR_H
-#define __ASM_ARCH_MX8M_DDR_H
-
-#define DDRC_DDR_SS_GPR0 0x3d000000
-#define DDRC_IPS_BASE_ADDR_0 0x3f400000
-#define IP2APB_DDRPHY_IPS_BASE_ADDR(X) (0x3c000000 + (X * 0x2000000))
-#define DDRPHY_MEM(X) (0x3c000000 + (X * 0x2000000) + 0x50000)
-
-struct ddrc_freq {
- u32 res0[8];
- u32 derateen;
- u32 derateint;
- u32 res1[10];
- u32 rfshctl0;
- u32 res2[4];
- u32 rfshtmg;
- u32 rfshtmg1;
- u32 res3[28];
- u32 init3;
- u32 init4;
- u32 res;
- u32 init6;
- u32 init7;
- u32 res4[4];
- u32 dramtmg0;
- u32 dramtmg1;
- u32 dramtmg2;
- u32 dramtmg3;
- u32 dramtmg4;
- u32 dramtmg5;
- u32 dramtmg6;
- u32 dramtmg7;
- u32 dramtmg8;
- u32 dramtmg9;
- u32 dramtmg10;
- u32 dramtmg11;
- u32 dramtmg12;
- u32 dramtmg13;
- u32 dramtmg14;
- u32 dramtmg15;
- u32 dramtmg16;
- u32 dramtmg17;
- u32 res5[10];
- u32 mramtmg0;
- u32 mramtmg1;
- u32 mramtmg4;
- u32 mramtmg9;
- u32 zqctl0;
- u32 res6[3];
- u32 dfitmg0;
- u32 dfitmg1;
- u32 res7[7];
- u32 dfitmg2;
- u32 dfitmg3;
- u32 res8[33];
- u32 odtcfg;
-};
-
-struct imx8m_ddrc_regs {
- u32 mstr;
- u32 stat;
- u32 mstr1;
- u32 res1;
- u32 mrctrl0;
- u32 mrctrl1;
- u32 mrstat;
- u32 mrctrl2;
- u32 derateen;
- u32 derateint;
- u32 mstr2;
- u32 res2;
- u32 pwrctl;
- u32 pwrtmg;
- u32 hwlpctl;
- u32 hwffcctl;
- u32 hwffcstat;
- u32 res3[3];
- u32 rfshctl0;
- u32 rfshctl1;
- u32 rfshctl2;
- u32 rfshctl4;
- u32 rfshctl3;
- u32 rfshtmg;
- u32 rfshtmg1;
- u32 res4;
- u32 ecccfg0;
- u32 ecccfg1;
- u32 eccstat;
- u32 eccclr;
- u32 eccerrcnt;
- u32 ecccaddr0;
- u32 ecccaddr1;
- u32 ecccsyn0;
- u32 ecccsyn1;
- u32 ecccsyn2;
- u32 eccbitmask0;
- u32 eccbitmask1;
- u32 eccbitmask2;
- u32 eccuaddr0;
- u32 eccuaddr1;
- u32 eccusyn0;
- u32 eccusyn1;
- u32 eccusyn2;
- u32 eccpoisonaddr0;
- u32 eccpoisonaddr1;
- u32 crcparctl0;
- u32 crcparctl1;
- u32 crcparctl2;
- u32 crcparstat;
- u32 init0;
- u32 init1;
- u32 init2;
- u32 init3;
- u32 init4;
- u32 init5;
- u32 init6;
- u32 init7;
- u32 dimmctl;
- u32 rankctl;
- u32 res5;
- u32 chctl;
- u32 dramtmg0;
- u32 dramtmg1;
- u32 dramtmg2;
- u32 dramtmg3;
- u32 dramtmg4;
- u32 dramtmg5;
- u32 dramtmg6;
- u32 dramtmg7;
- u32 dramtmg8;
- u32 dramtmg9;
- u32 dramtmg10;
- u32 dramtmg11;
- u32 dramtmg12;
- u32 dramtmg13;
- u32 dramtmg14;
- u32 dramtmg15;
- u32 dramtmg16;
- u32 dramtmg17;
- u32 res6[10];
- u32 mramtmg0;
- u32 mramtmg1;
- u32 mramtmg4;
- u32 mramtmg9;
- u32 zqctl0;
- u32 zqctl1;
- u32 zqctl2;
- u32 zqstat;
- u32 dfitmg0;
- u32 dfitmg1;
- u32 dfilpcfg0;
- u32 dfilpcfg1;
- u32 dfiupd0;
- u32 dfiupd1;
- u32 dfiupd2;
- u32 res7;
- u32 dfimisc;
- u32 dfitmg2;
- u32 dfitmg3;
- u32 dfistat;
- u32 dbictl;
- u32 dfiphymstr;
- u32 res8[14];
- u32 addrmap0;
- u32 addrmap1;
- u32 addrmap2;
- u32 addrmap3;
- u32 addrmap4;
- u32 addrmap5;
- u32 addrmap6;
- u32 addrmap7;
- u32 addrmap8;
- u32 addrmap9;
- u32 addrmap10;
- u32 addrmap11;
- u32 res9[4];
- u32 odtcfg;
- u32 odtmap;
- u32 res10[2];
- u32 sched;
- u32 sched1;
- u32 sched2;
- u32 perfhpr1;
- u32 res11;
- u32 perflpr1;
- u32 res12;
- u32 perfwr1;
- u32 res13[4];
- u32 dqmap0;
- u32 dqmap1;
- u32 dqmap2;
- u32 dqmap3;
- u32 dqmap4;
- u32 dqmap5;
- u32 res14[26];
- u32 dbg0;
- u32 dbg1;
- u32 dbgcam;
- u32 dbgcmd;
- u32 dbgstat;
- u32 res15[3];
- u32 swctl;
- u32 swstat;
- u32 res16[2];
- u32 ocparcfg0;
- u32 ocparcfg1;
- u32 ocparcfg2;
- u32 ocparcfg3;
- u32 ocparstat0;
- u32 ocparstat1;
- u32 ocparwlog0;
- u32 ocparwlog1;
- u32 ocparwlog2;
- u32 ocparawlog0;
- u32 ocparawlog1;
- u32 ocparrlog0;
- u32 ocparrlog1;
- u32 ocpararlog0;
- u32 ocpararlog1;
- u32 poisoncfg;
- u32 poisonstat;
- u32 adveccindex;
- union {
- u32 adveccstat;
- u32 eccapstat;
- };
- u32 eccpoisonpat0;
- u32 eccpoisonpat1;
- u32 eccpoisonpat2;
- u32 res17[6];
- u32 caparpoisonctl;
- u32 caparpoisonstat;
- u32 res18[2];
- u32 dynbsmstat;
- u32 res19[18];
- u32 pstat;
- u32 pccfg;
- struct {
- u32 pcfgr;
- u32 pcfgw;
- u32 pcfgc;
- struct {
- u32 pcfgidmaskch0;
- u32 pcfidvaluech0;
- } pcfgid[16];
- u32 pctrl;
- u32 pcfgqos0;
- u32 pcfgqos1;
- u32 pcfgwqos0;
- u32 pcfgwqos1;
- u32 res[4];
- } pcfg[16];
- struct {
- u32 sarbase;
- u32 sarsize;
- } sar[4];
- u32 sbrctl;
- u32 sbrstat;
- u32 sbrwdata0;
- u32 sbrwdata1;
- u32 pdch;
- u32 res20[755];
- /* umctl2_regs_dch1 */
- u32 ch1_stat;
- u32 res21[2];
- u32 ch1_mrctrl0;
- u32 ch1_mrctrl1;
- u32 ch1_mrstat;
- u32 ch1_mrctrl2;
- u32 res22[4];
- u32 ch1_pwrctl;
- u32 ch1_pwrtmg;
- u32 ch1_hwlpctl;
- u32 res23[15];
- u32 ch1_eccstat;
- u32 ch1_eccclr;
- u32 ch1_eccerrcnt;
- u32 ch1_ecccaddr0;
- u32 ch1_ecccaddr1;
- u32 ch1_ecccsyn0;
- u32 ch1_ecccsyn1;
- u32 ch1_ecccsyn2;
- u32 ch1_eccbitmask0;
- u32 ch1_eccbitmask1;
- u32 ch1_eccbitmask2;
- u32 ch1_eccuaddr0;
- u32 ch1_eccuaddr1;
- u32 ch1_eccusyn0;
- u32 ch1_eccusyn1;
- u32 ch1_eccusyn2;
- u32 res24[2];
- u32 ch1_crcparctl0;
- u32 res25[2];
- u32 ch1_crcparstat;
- u32 res26[46];
- u32 ch1_zqctl2;
- u32 ch1_zqstat;
- u32 res27[11];
- u32 ch1_dfistat;
- u32 res28[33];
- u32 ch1_odtmap;
- u32 res29[47];
- u32 ch1_dbg1;
- u32 ch1_dbgcam;
- u32 ch1_dbgcmd;
- u32 ch1_dbgstat;
- u32 res30[123];
- /* umctl2_regs_freq1 */
- struct ddrc_freq freq1;
- u32 res31[109];
- /* umctl2_regs_addrmap_alt */
- u32 addrmap0_alt;
- u32 addrmap1_alt;
- u32 addrmap2_alt;
- u32 addrmap3_alt;
- u32 addrmap4_alt;
- u32 addrmap5_alt;
- u32 addrmap6_alt;
- u32 addrmap7_alt;
- u32 addrmap8_alt;
- u32 addrmap9_alt;
- u32 addrmap10_alt;
- u32 addrmap11_alt;
- u32 res32[758];
- /* umctl2_regs_freq2 */
- struct ddrc_freq freq2;
- u32 res33[879];
- /* umctl2_regs_freq3 */
- struct ddrc_freq freq3;
-};
-
-struct imx8m_ddrphy_regs {
- u32 reg[0xf0000];
-};
-
-/* PHY State */
-enum pstate {
- PS0,
- PS1,
- PS2,
- PS3,
-};
-
-enum msg_response {
- TRAIN_SUCCESS = 0x7,
- TRAIN_STREAM_START = 0x8,
- TRAIN_FAIL = 0xff,
-};
-
-#endif
#define IOMUX_CONFIG_LPSR 0x20
#define MUX_MODE_LPSR ((iomux_v3_cfg_t)IOMUX_CONFIG_LPSR << \
MUX_MODE_SHIFT)
-#ifdef CONFIG_MX8M
+#ifdef CONFIG_IMX8M
#define PAD_CTL_DSE0 (0x0 << 0)
#define PAD_CTL_DSE1 (0x1 << 0)
#define PAD_CTL_DSE2 (0x2 << 0)
defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL) || \
defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) || \
defined(CONFIG_MX7) || defined(CONFIG_MX7ULP) || \
- defined(CONFIG_MX8M)
+ defined(CONFIG_IMX8M)
mxs_reg_32(hw_lcdif_ctrl2) /* 0x20 */
#endif
mxs_reg_32(hw_lcdif_transfer_count) /* 0x20/0x30 */
defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL) || \
defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) || \
defined(CONFIG_MX7) || defined(CONFIG_MX7ULP) || \
- defined(CONFIG_MX8M)
+ defined(CONFIG_IMX8M)
mxs_reg_32(hw_lcdif_crc_stat) /* 0x1a0 */
#endif
mxs_reg_32(hw_lcdif_lcdif_stat) /* 0x1d0/0x1b0 */
defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL) || \
defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) || \
defined(CONFIG_MX7) || defined(CONFIG_MX7ULP) || \
- defined(CONFIG_MX8M)
+ defined(CONFIG_IMX8M)
mxs_reg_32(hw_lcdif_thres)
mxs_reg_32(hw_lcdif_as_ctrl)
mxs_reg_32(hw_lcdif_as_buf)
#define is_mx6() (is_soc_type(MXC_SOC_MX6))
#define is_mx7() (is_soc_type(MXC_SOC_MX7))
-#define is_mx8m() (is_soc_type(MXC_SOC_MX8M))
+#define is_imx8m() (is_soc_type(MXC_SOC_IMX8M))
#define is_imx8() (is_soc_type(MXC_SOC_IMX8))
#define is_mx6dqp() (is_cpu_type(MXC_CPU_MX6QP) || is_cpu_type(MXC_CPU_MX6DP))
#define is_mx7ulp() (is_cpu_type(MXC_CPU_MX7ULP))
+#define is_imx8mq() (is_cpu_type(MXC_CPU_IMX8MQ))
#define is_imx8qxp() (is_cpu_type(MXC_CPU_IMX8QXP))
#ifdef CONFIG_MX6
#
# (C) Copyright 2011 Freescale Semiconductor, Inc.
-ifeq ($(SOC),$(filter $(SOC),mx25 mx35 mx5 mx6 mx7 mx8m vf610))
+ifeq ($(SOC),$(filter $(SOC),mx25 mx35 mx5 mx6 mx7 imx8m vf610))
obj-y = iomux-v3.o
endif
-ifeq ($(SOC),$(filter $(SOC),mx8m))
+ifeq ($(SOC),$(filter $(SOC),imx8m))
+ifneq ($(CONFIG_SPL_BUILD),y)
obj-$(CONFIG_IMX_BOOTAUX) += imx_bootaux.o
+endif
obj-$(CONFIG_ENV_IS_IN_MMC) += mmc_env.o
obj-$(CONFIG_FEC_MXC) += mac.o
obj-$(CONFIG_SYS_I2C_MXC) += i2c-mxv7.o
obj-$(CONFIG_GPT_TIMER) += timer.o
obj-$(CONFIG_SYS_I2C_MXC) += i2c-mxv7.o
endif
-ifeq ($(SOC),$(filter $(SOC),mx7 mx6 mxs mx8m))
+ifeq ($(SOC),$(filter $(SOC),mx7 mx6 mxs imx8m))
obj-y += misc.o
obj-$(CONFIG_SPL_BUILD) += spl.o
endif
ifeq ($(CONFIG_ARCH_IMX8), y)
CNTR_DEPFILES := $(srctree)/tools/imx_cntr_image.sh
IMAGE_TYPE := imx8image
-DEPFILE_EXISTS := $(shell if [ -f u-boot-dtb.cfgout ]; then $(CNTR_DEPFILES) u-boot-dtb.cfgout; echo $$?; fi)
+DEPFILE_EXISTS := $(shell $(CPP) $(cpp_flags) -x c -o u-boot-dtb.cfgout $(srctree)/$(IMX_CONFIG); if [ -f u-boot-dtb.cfgout ]; then $(CNTR_DEPFILES) u-boot-dtb.cfgout; echo $$?; fi)
+else ifeq ($(CONFIG_ARCH_IMX8M), y)
+IMAGE_TYPE := imx8mimage
+IMX8M_DEPFILES := $(srctree)/tools/imx8m_image.sh
+DEPFILE_EXISTS := $(shell $(CPP) $(cpp_flags) -x c -o spl/u-boot-spl.cfgout $(srctree)/$(IMX_CONFIG);if [ -f spl/u-boot-spl.cfgout ]; then $(IMX8M_DEPFILES) spl/u-boot-spl.cfgout 0; echo $$?; fi)
else
IMAGE_TYPE := imximage
DEPFILE_EXISTS := 0
endif
endif
+ifdef CONFIG_ARM64
+ifeq ($(CONFIG_ARCH_IMX8M), y)
+SPL:
+
+MKIMAGEFLAGS_flash.bin = -n spl/u-boot-spl.cfgout \
+ -T $(IMAGE_TYPE) -e $(CONFIG_SPL_TEXT_BASE)
+flash.bin: MKIMAGEOUTPUT = flash.log
+
+spl/u-boot-spl-ddr.bin: spl/u-boot-spl.bin spl/u-boot-spl.cfgout FORCE
+ifeq ($(DEPFILE_EXISTS),0)
+ $(IMX8M_DEPFILES) spl/u-boot-spl.cfgout 1
+endif
+
+flash.bin: spl/u-boot-spl-ddr.bin u-boot.itb FORCE
+ifeq ($(DEPFILE_EXISTS),0)
+ $(call if_changed,mkimage)
+endif
+endif
+
+else
MKIMAGEFLAGS_SPL = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) \
-T $(IMAGE_TYPE) -e $(CONFIG_SPL_TEXT_BASE)
SPL: MKIMAGEOUTPUT = SPL.log
spl/u-boot-nand-spl.imx: SPL FORCE
$(call if_changed,u-boot-nand-spl_imx)
+endif
targets += $(addprefix ../../../,SPL spl/u-boot-spl.cfgout u-boot-dtb.cfgout u-boot.cfgout u-boot.uim spl/u-boot-nand-spl.imx)
obj-$(CONFIG_MX6) += mx6/
obj-$(CONFIG_MX7) += mx7/
obj-$(CONFIG_ARCH_MX7ULP) += mx7ulp/
-obj-$(CONFIG_MX8M) += mx8m/
+obj-$(CONFIG_IMX8M) += imx8m/
obj-$(CONFIG_ARCH_IMX8) += imx8/
return "WDOG4";
case 0x00200:
return "TEMPSENSE";
-#elif defined(CONFIG_MX8M)
+#elif defined(CONFIG_IMX8M)
case 0x00100:
return "WDOG2";
case 0x00200:
const char *get_imx_type(u32 imxtype)
{
switch (imxtype) {
- case MXC_CPU_MX8MQ:
- return "8MQ"; /* Quad-core version of the mx8m */
+ case MXC_CPU_IMX8MQ:
+ return "8MQ"; /* Quad-core version of the imx8m */
case MXC_CPU_MX7S:
return "7S"; /* Single-core version of the mx7 */
case MXC_CPU_MX7D:
}
#endif
-#if !(defined(CONFIG_MX7) || defined(CONFIG_MX8M))
+#if !(defined(CONFIG_MX7) || defined(CONFIG_IMX8M))
u32 get_ahb_clk(void)
{
struct mxc_ccm_reg *imx_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
#endif
}
-#ifndef CONFIG_MX8M
+#ifndef CONFIG_IMX8M
void set_chipselect_size(int const cs_size)
{
unsigned int reg;
}
#endif
-#if defined(CONFIG_MX7) || defined(CONFIG_MX8M)
+#if defined(CONFIG_MX7) || defined(CONFIG_IMX8M)
/*
* OCOTP_TESTER3[9:8] (see Fusemap Description Table offset 0x440)
* defines a 2-bit SPEED_GRADING
}
#endif
-#if defined(CONFIG_MX7) || defined(CONFIG_MX8M)
+#if defined(CONFIG_MX7) || defined(CONFIG_IMX8M)
enum boot_device get_boot_device(void)
{
struct bootrom_sw_info **p =
case BOOT_TYPE_SPINOR:
boot_dev = SPI_NOR_BOOT;
break;
-#ifdef CONFIG_MX8M
+#ifdef CONFIG_IMX8M
case BOOT_TYPE_USB:
boot_dev = USB_BOOT;
break;
#include <common.h>
#include <config.h>
#include <fuse.h>
+#include <mapmem.h>
+#include <image.h>
#include <asm/io.h>
#include <asm/system.h>
#include <asm/arch/clock.h>
return 0;
}
+static ulong get_image_ivt_offset(ulong img_addr)
+{
+ const void *buf;
+
+ buf = map_sysmem(img_addr, 0);
+ switch (genimg_get_format(buf)) {
+#if defined(CONFIG_IMAGE_FORMAT_LEGACY)
+ case IMAGE_FORMAT_LEGACY:
+ return (image_get_image_size((image_header_t *)img_addr)
+ + 0x1000 - 1) & ~(0x1000 - 1);
+#endif
+#if IMAGE_ENABLE_FIT
+ case IMAGE_FORMAT_FIT:
+ return (fit_get_size(buf) + 0x1000 - 1) & ~(0x1000 - 1);
+#endif
+ default:
+ return 0;
+ }
+}
+
static int do_authenticate_image(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[])
{
ulong addr, length, ivt_offset;
int rcode = 0;
- if (argc < 4)
+ if (argc < 3)
return CMD_RET_USAGE;
addr = simple_strtoul(argv[1], NULL, 16);
length = simple_strtoul(argv[2], NULL, 16);
- ivt_offset = simple_strtoul(argv[3], NULL, 16);
+ if (argc == 3)
+ ivt_offset = get_image_ivt_offset(addr);
+ else
+ ivt_offset = simple_strtoul(argv[3], NULL, 16);
rcode = imx_hab_authenticate_image(addr, length, ivt_offset);
if (rcode == 0)
--- /dev/null
+if ARCH_IMX8M
+
+config IMX8M
+ bool
+ select ROM_UNIFIED_SECTIONS
+
+config SYS_SOC
+ default "imx8m"
+
+choice
+ prompt "NXP i.MX8M board select"
+ optional
+
+config TARGET_IMX8MQ_EVK
+ bool "imx8mq_evk"
+ select IMX8M
+ select IMX8M_LPDDR4
+
+endchoice
+
+source "board/freescale/imx8mq_evk/Kconfig"
+
+endif
return get_root_clk(ENET_AXI_CLK_ROOT);
}
-#ifdef CONFIG_SPL_BUILD
-void dram_pll_init(void)
+static struct dram_bypass_clk_setting imx8mq_dram_bypass_tbl[] = {
+ DRAM_BYPASS_ROOT_CONFIG(MHZ(100), 2, CLK_ROOT_PRE_DIV1, 2,
+ CLK_ROOT_PRE_DIV2),
+ DRAM_BYPASS_ROOT_CONFIG(MHZ(250), 3, CLK_ROOT_PRE_DIV2, 2,
+ CLK_ROOT_PRE_DIV2),
+ DRAM_BYPASS_ROOT_CONFIG(MHZ(400), 1, CLK_ROOT_PRE_DIV2, 3,
+ CLK_ROOT_PRE_DIV2),
+};
+
+void dram_enable_bypass(ulong clk_val)
{
- struct src *src = (struct src *)SRC_BASE_ADDR;
- void __iomem *pll_control_reg = &ana_pll->dram_pll_cfg0;
- u32 pwdn_mask = 0, pll_clke = 0, bypass1 = 0, bypass2 = 0;
- u32 val;
- int ret;
+ int i;
+ struct dram_bypass_clk_setting *config;
- setbits_le32(GPC_BASE_ADDR + 0xEC, BIT(7));
- setbits_le32(GPC_BASE_ADDR + 0xF8, BIT(5));
+ for (i = 0; i < ARRAY_SIZE(imx8mq_dram_bypass_tbl); i++) {
+ if (clk_val == imx8mq_dram_bypass_tbl[i].clk)
+ break;
+ }
+
+ if (i == ARRAY_SIZE(imx8mq_dram_bypass_tbl)) {
+ printf("No matched freq table %lu\n", clk_val);
+ return;
+ }
- pwdn_mask = SSCG_PLL_PD_MASK;
- pll_clke = SSCG_PLL_DRAM_PLL_CLKE_MASK;
- bypass1 = SSCG_PLL_BYPASS1_MASK;
- bypass2 = SSCG_PLL_BYPASS2_MASK;
+ config = &imx8mq_dram_bypass_tbl[i];
- /* Enable DDR1 and DDR2 domain */
- writel(SRC_DDR1_ENABLE_MASK, &src->ddr1_rcr);
- writel(SRC_DDR1_ENABLE_MASK, &src->ddr2_rcr);
+ clock_set_target_val(DRAM_ALT_CLK_ROOT, CLK_ROOT_ON |
+ CLK_ROOT_SOURCE_SEL(config->alt_root_sel) |
+ CLK_ROOT_PRE_DIV(config->alt_pre_div));
+ clock_set_target_val(DRAM_APB_CLK_ROOT, CLK_ROOT_ON |
+ CLK_ROOT_SOURCE_SEL(config->apb_root_sel) |
+ CLK_ROOT_PRE_DIV(config->apb_pre_div));
+ clock_set_target_val(DRAM_SEL_CFG, CLK_ROOT_ON |
+ CLK_ROOT_SOURCE_SEL(1));
+}
+
+void dram_disable_bypass(void)
+{
+ clock_set_target_val(DRAM_SEL_CFG, CLK_ROOT_ON |
+ CLK_ROOT_SOURCE_SEL(0));
+ clock_set_target_val(DRAM_APB_CLK_ROOT, CLK_ROOT_ON |
+ CLK_ROOT_SOURCE_SEL(4) |
+ CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV5));
+}
+
+#ifdef CONFIG_SPL_BUILD
+void dram_pll_init(ulong pll_val)
+{
+ u32 val;
+ void __iomem *pll_control_reg = &ana_pll->dram_pll_cfg0;
+ void __iomem *pll_cfg_reg2 = &ana_pll->dram_pll_cfg2;
+
+ /* Bypass */
+ setbits_le32(pll_control_reg, SSCG_PLL_BYPASS1_MASK);
+ setbits_le32(pll_control_reg, SSCG_PLL_BYPASS2_MASK);
+
+ switch (pll_val) {
+ case MHZ(800):
+ val = readl(pll_cfg_reg2);
+ val &= ~(SSCG_PLL_OUTPUT_DIV_VAL_MASK |
+ SSCG_PLL_FEEDBACK_DIV_F2_MASK |
+ SSCG_PLL_FEEDBACK_DIV_F1_MASK |
+ SSCG_PLL_REF_DIVR2_MASK);
+ val |= SSCG_PLL_OUTPUT_DIV_VAL(0);
+ val |= SSCG_PLL_FEEDBACK_DIV_F2_VAL(11);
+ val |= SSCG_PLL_FEEDBACK_DIV_F1_VAL(39);
+ val |= SSCG_PLL_REF_DIVR2_VAL(29);
+ writel(val, pll_cfg_reg2);
+ break;
+ case MHZ(600):
+ val = readl(pll_cfg_reg2);
+ val &= ~(SSCG_PLL_OUTPUT_DIV_VAL_MASK |
+ SSCG_PLL_FEEDBACK_DIV_F2_MASK |
+ SSCG_PLL_FEEDBACK_DIV_F1_MASK |
+ SSCG_PLL_REF_DIVR2_MASK);
+ val |= SSCG_PLL_OUTPUT_DIV_VAL(1);
+ val |= SSCG_PLL_FEEDBACK_DIV_F2_VAL(17);
+ val |= SSCG_PLL_FEEDBACK_DIV_F1_VAL(39);
+ val |= SSCG_PLL_REF_DIVR2_VAL(29);
+ writel(val, pll_cfg_reg2);
+ break;
+ case MHZ(400):
+ val = readl(pll_cfg_reg2);
+ val &= ~(SSCG_PLL_OUTPUT_DIV_VAL_MASK |
+ SSCG_PLL_FEEDBACK_DIV_F2_MASK |
+ SSCG_PLL_FEEDBACK_DIV_F1_MASK |
+ SSCG_PLL_REF_DIVR2_MASK);
+ val |= SSCG_PLL_OUTPUT_DIV_VAL(1);
+ val |= SSCG_PLL_FEEDBACK_DIV_F2_VAL(11);
+ val |= SSCG_PLL_FEEDBACK_DIV_F1_VAL(39);
+ val |= SSCG_PLL_REF_DIVR2_VAL(29);
+ writel(val, pll_cfg_reg2);
+ break;
+ case MHZ(167):
+ val = readl(pll_cfg_reg2);
+ val &= ~(SSCG_PLL_OUTPUT_DIV_VAL_MASK |
+ SSCG_PLL_FEEDBACK_DIV_F2_MASK |
+ SSCG_PLL_FEEDBACK_DIV_F1_MASK |
+ SSCG_PLL_REF_DIVR2_MASK);
+ val |= SSCG_PLL_OUTPUT_DIV_VAL(3);
+ val |= SSCG_PLL_FEEDBACK_DIV_F2_VAL(8);
+ val |= SSCG_PLL_FEEDBACK_DIV_F1_VAL(45);
+ val |= SSCG_PLL_REF_DIVR2_VAL(30);
+ writel(val, pll_cfg_reg2);
+ break;
+ default:
+ break;
+ }
/* Clear power down bit */
- clrbits_le32(pll_control_reg, pwdn_mask);
+ clrbits_le32(pll_control_reg, SSCG_PLL_PD_MASK);
/* Eanble ARM_PLL/SYS_PLL */
- setbits_le32(pll_control_reg, pll_clke);
+ setbits_le32(pll_control_reg, SSCG_PLL_DRAM_PLL_CLKE_MASK);
/* Clear bypass */
- clrbits_le32(pll_control_reg, bypass1);
+ clrbits_le32(pll_control_reg, SSCG_PLL_BYPASS1_MASK);
__udelay(100);
- clrbits_le32(pll_control_reg, bypass2);
+ clrbits_le32(pll_control_reg, SSCG_PLL_BYPASS2_MASK);
/* Wait lock */
- ret = readl_poll_timeout(pll_control_reg, val,
- val & SSCG_PLL_LOCK_MASK, 1);
- if (ret)
- printf("%s timeout\n", __func__);
+ while (!(readl(pll_control_reg) & SSCG_PLL_LOCK_MASK))
+ ;
}
int frac_pll_init(u32 pll, enum frac_pll_out_val val)
* Dump some clockes.
*/
#ifndef CONFIG_SPL_BUILD
-int do_mx8m_showclocks(cmd_tbl_t *cmdtp, int flag, int argc,
+int do_imx8m_showclocks(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[])
{
u32 freq;
}
U_BOOT_CMD(
- clocks, CONFIG_SYS_MAXARGS, 1, do_mx8m_showclocks,
+ clocks, CONFIG_SYS_MAXARGS, 1, do_imx8m_showclocks,
"display clocks",
""
);
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ */
+
+#define __ASSEMBLY__
+
+FIT
+BOOT_FROM sd
+SIGNED_HDMI signed_hdmi_imx8m.bin
+LOADER spl/u-boot-spl-ddr.bin 0x7E1000
+SECOND_LOADER u-boot.itb 0x40200000 0x60000
+
+DDR_FW lpddr4_pmu_train_1d_imem.bin
+DDR_FW lpddr4_pmu_train_1d_dmem.bin
+DDR_FW lpddr4_pmu_train_2d_imem.bin
+DDR_FW lpddr4_pmu_train_2d_dmem.bin
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
PTE_BLOCK_OUTER_SHARE
}, {
+ /* CAAM */
+ .virt = 0x100000UL,
+ .phys = 0x100000UL,
+ .size = 0x8000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+ PTE_BLOCK_NON_SHARE |
+ PTE_BLOCK_PXN | PTE_BLOCK_UXN
+ }, {
+ /* TCM */
+ .virt = 0x7C0000UL,
+ .phys = 0x7C0000UL,
+ .size = 0x80000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+ PTE_BLOCK_NON_SHARE |
+ PTE_BLOCK_PXN | PTE_BLOCK_UXN
+ }, {
/* OCRAM */
.virt = 0x900000UL,
.phys = 0x900000UL,
if (!boot_private_data)
return -EINVAL;
- stack = *(ulong *)boot_private_data;
- pc = *(ulong *)(boot_private_data + 4);
+ stack = *(u32 *)boot_private_data;
+ pc = *(u32 *)(boot_private_data + 4);
/* Set the stack and pc to M4 bootROM */
writel(stack, M4_BOOTROM_BASE_ADDR);
writel(pc, M4_BOOTROM_BASE_ADDR + 4);
/* Enable M4 */
-#ifdef CONFIG_MX8M
+#ifdef CONFIG_IMX8M
call_imx_sip(IMX_SIP_SRC, IMX_SIP_SRC_M4_START, 0, 0);
#else
clrsetbits_le32(SRC_BASE_ADDR + SRC_M4_REG_OFFSET,
int arch_auxiliary_core_check_up(u32 core_id)
{
-#ifdef CONFIG_MX8M
+#ifdef CONFIG_IMX8M
return call_imx_sip(IMX_SIP_SRC, IMX_SIP_SRC_M4_STARTED, 0, 0);
#else
unsigned int val;
--- /dev/null
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0+
+#
+# script to generate FIT image source for i.MX8MQ boards with
+# ARM Trusted Firmware and multiple device trees (given on the command line)
+#
+# usage: $0 <dt_name> [<dt_name> [<dt_name] ...]
+
+[ -z "$BL31" ] && BL31="bl31.bin"
+[ -z "$TEE_LOAD_ADDR" ] && TEE_LOAD_ADDR="0xfe000000"
+[ -z "$ATF_LOAD_ADDR" ] && ATF_LOAD_ADDR="0x00910000"
+
+if [ ! -f $BL31 ]; then
+ echo "ERROR: BL31 file $BL31 NOT found" >&2
+ exit 0
+else
+ echo "$BL31 size: " >&2
+ ls -lct $BL31 | awk '{print $5}' >&2
+fi
+
+BL32="tee.bin"
+
+if [ ! -f $BL32 ]; then
+ BL32=/dev/null
+else
+ echo "Building with TEE support, make sure your $BL31 is compiled with spd. If you do not want tee, please delete $BL31" >&2
+ echo "$BL32 size: " >&2
+ ls -lct $BL32 | awk '{print $5}' >&2
+fi
+
+BL33="u-boot-nodtb.bin"
+
+if [ ! -f $BL33 ]; then
+ echo "ERROR: $BL33 file NOT found" >&2
+ exit 0
+else
+ echo "u-boot-nodtb.bin size: " >&2
+ ls -lct u-boot-nodtb.bin | awk '{print $5}' >&2
+fi
+
+for dtname in $*
+do
+ echo "$dtname size: " >&2
+ ls -lct $dtname | awk '{print $5}' >&2
+done
+
+
+cat << __HEADER_EOF
+/dts-v1/;
+
+/ {
+ description = "Configuration to load ATF before U-Boot";
+
+ images {
+ uboot@1 {
+ description = "U-Boot (64-bit)";
+ data = /incbin/("$BL33");
+ type = "standalone";
+ arch = "arm64";
+ compression = "none";
+ load = <0x40200000>;
+ };
+ atf@1 {
+ description = "ARM Trusted Firmware";
+ data = /incbin/("$BL31");
+ type = "firmware";
+ arch = "arm64";
+ compression = "none";
+ load = <$ATF_LOAD_ADDR>;
+ entry = <$ATF_LOAD_ADDR>;
+ };
+__HEADER_EOF
+
+if [ -f $BL32 ]; then
+cat << __HEADER_EOF
+ tee@1 {
+ description = "TEE firmware";
+ data = /incbin/("$BL32");
+ type = "firmware";
+ arch = "arm64";
+ compression = "none";
+ load = <$TEE_LOAD_ADDR>;
+ entry = <$TEE_LOAD_ADDR>;
+ };
+__HEADER_EOF
+fi
+
+cnt=1
+for dtname in $*
+do
+ cat << __FDT_IMAGE_EOF
+ fdt@$cnt {
+ description = "$(basename $dtname .dtb)";
+ data = /incbin/("$dtname");
+ type = "flat_dt";
+ compression = "none";
+ };
+__FDT_IMAGE_EOF
+cnt=$((cnt+1))
+done
+
+cat << __CONF_HEADER_EOF
+ };
+ configurations {
+ default = "config@1";
+
+__CONF_HEADER_EOF
+
+cnt=1
+for dtname in $*
+do
+if [ -f $BL32 ]; then
+cat << __CONF_SECTION_EOF
+ config@$cnt {
+ description = "$(basename $dtname .dtb)";
+ firmware = "uboot@1";
+ loadables = "atf@1", "tee@1";
+ fdt = "fdt@$cnt";
+ };
+__CONF_SECTION_EOF
+else
+cat << __CONF_SECTION1_EOF
+ config@$cnt {
+ description = "$(basename $dtname .dtb)";
+ firmware = "uboot@1";
+ loadables = "atf@1";
+ fdt = "fdt@$cnt";
+ };
+__CONF_SECTION1_EOF
+fi
+cnt=$((cnt+1))
+done
+
+cat << __ITS_EOF
+ };
+};
+__ITS_EOF
config TARGET_EMBESTMX6BOARDS
bool "embestmx6boards"
select BOARD_LATE_INIT
+ select SUPPORT_SPL
config TARGET_GE_BX50V3
bool "General Electric Bx50v3"
+++ /dev/null
-if ARCH_MX8M
-
-config MX8M
- bool
- select ROM_UNIFIED_SECTIONS
-
-config SYS_SOC
- default "mx8m"
-
-endif
return BOOT_DEVICE_NONE;
}
-#elif defined(CONFIG_MX7) || defined(CONFIG_MX8M)
-/* Translate iMX7/MX8M boot device to the SPL boot device enumeration */
+#elif defined(CONFIG_MX7) || defined(CONFIG_IMX8M)
+/* Translate iMX7/i.MX8M boot device to the SPL boot device enumeration */
u32 spl_boot_device(void)
{
#if defined(CONFIG_MX7)
enum boot_device boot_device_spl = get_boot_device();
switch (boot_device_spl) {
+#if defined(CONFIG_MX7)
case SD1_BOOT:
case MMC1_BOOT:
case SD2_BOOT:
case SD3_BOOT:
case MMC3_BOOT:
return BOOT_DEVICE_MMC1;
+#elif defined(CONFIG_IMX8M)
+ case SD1_BOOT:
+ case MMC1_BOOT:
+ return BOOT_DEVICE_MMC1;
+ case SD2_BOOT:
+ case MMC2_BOOT:
+ return BOOT_DEVICE_MMC2;
+#endif
case NAND_BOOT:
return BOOT_DEVICE_NAND;
case SPI_NOR_BOOT:
return BOOT_DEVICE_NONE;
}
}
-#endif /* CONFIG_MX6 || CONFIG_MX7 || CONFIG_MX8M */
+#endif /* CONFIG_MX7 || CONFIG_IMX8M */
#ifdef CONFIG_SPL_USB_GADGET_SUPPORT
int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name)
debug("image entry point: 0x%lX\n", spl_image->entry_point);
- /* HAB looks for the CSF at the end of the authenticated data therefore,
- * we need to subtract the size of the CSF from the actual filesize */
- offset = spl_image->size - CONFIG_CSF_SIZE;
- if (!imx_hab_authenticate_image(spl_image->load_addr,
- offset + IVT_SIZE + CSF_PAD_SIZE,
- offset)) {
+ if (spl_image->flags & SPL_FIT_FOUND) {
image_entry();
} else {
+ /*
+ * HAB looks for the CSF at the end of the authenticated
+ * data therefore, we need to subtract the size of the
+ * CSF from the actual filesize
+ */
+ offset = spl_image->size - CONFIG_CSF_SIZE;
+ if (!imx_hab_authenticate_image(spl_image->load_addr,
+ offset + IVT_SIZE +
+ CSF_PAD_SIZE, offset)) {
+ image_entry();
+ } else {
+ puts("spl: ERROR: image authentication fail\n");
+ hang();
+ }
+ }
+}
+
+ulong board_spl_fit_size_align(ulong size)
+{
+ /*
+ * HAB authenticate_image requests the IVT offset is
+ * aligned to 0x1000
+ */
+
+ size = ALIGN(size, 0x1000);
+ size += CONFIG_CSF_SIZE;
+
+ return size;
+}
+
+void board_spl_fit_post_load(ulong load_addr, size_t length)
+{
+ u32 offset = length - CONFIG_CSF_SIZE;
+
+ if (imx_hab_authenticate_image(load_addr,
+ offset + IVT_SIZE + CSF_PAD_SIZE,
+ offset)) {
puts("spl: ERROR: image authentication unsuccessful\n");
hang();
}
-// SPDX-License-Identifier: GPL-2.0+
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
/*
- * (C) Copyright 2015 Google, Inc
+ * (C) Copyright 2015 Rockchip Electronics Co., Ltd
*/
#include <common.h>
#include <asm/io.h>
rank, col, bk, cs0_row, bw, row_3_4);
}
+ /*
+ * This is workaround for issue we can't get correct size for 4GB ram
+ * in 32bit system and available before we really need ram space
+ * out of 4GB, eg.enable ARM LAPE(rk3288 supports 8GB ram).
+ * The size of 4GB is '0x1 00000000', and this value will be truncated
+ * to 0 in 32bit system, and system can not get correct ram size.
+ * Rockchip SoCs reserve a blob of space for peripheral near 4GB,
+ * and we are now setting SDRAM_MAX_SIZE as max available space for
+ * ram in 4GB, so we can use this directly to workaround the issue.
+ * TODO:
+ * 1. update correct value for SDRAM_MAX_SIZE as what dram
+ * controller sees.
+ * 2. update board_get_usable_ram_top() and dram_init_banksize()
+ * to reserve memory for peripheral space after previous update.
+ */
+ if (size_mb > (SDRAM_MAX_SIZE >> 20))
+ size_mb = (SDRAM_MAX_SIZE >> 20);
+
return (size_t)size_mb << 20;
}
switch (uniphier_boot_device_raw()) {
case BOOT_DEVICE_MMC1:
printf("eMMC Boot");
- env_set("bootcmd", "run bootcmd_mmc0; run distro_bootcmd");
+ env_set("bootdev", "emmc");
break;
case BOOT_DEVICE_NAND:
printf("NAND Boot");
- env_set("bootcmd", "run bootcmd_ubifs0; run distro_bootcmd");
+ env_set("bootdev", "nand");
nand_denali_wp_disable();
break;
case BOOT_DEVICE_NOR:
printf("NOR Boot");
- env_set("bootcmd", "run tftpboot; run distro_bootcmd");
+ env_set("bootdev", "nor");
break;
case BOOT_DEVICE_USB:
printf("USB Boot");
- env_set("bootcmd", "run bootcmd_usb0; run distro_bootcmd");
+ env_set("bootdev", "usb");
break;
default:
printf("Unknown");
bootstage_mark(BOOTSTAGE_ID_RUN_OS);
- debug("## Transferring control to Linux (at address %08lx) ...\n",
+ debug("## Transferring control to kernel (at address %08lx) ...\n",
(ulong)kernel);
announce_and_cleanup(fake);
boot_jump_linux(images, flag);
return 0;
}
+
+int do_bootm_vxworks(int flag, int argc, char * const argv[],
+ bootm_headers_t *images)
+{
+ return do_bootm_linux(flag, argc, argv, images);
+}
F: include/configs/embestmx6boards.h
F: configs/marsboard_defconfig
F: configs/riotboard_defconfig
+F: configs/riotboard_spl_defconfig
return 0;
}
+
+#ifdef CONFIG_SPL_BUILD
+#include <spl.h>
+
+void board_init_f(ulong dummy)
+{
+ u32 cputype = cpu_type(get_cpu_rev());
+
+ switch (cputype) {
+ case MXC_CPU_MX6SOLO:
+ board_type = BOARD_IS_RIOTBOARD;
+ break;
+ case MXC_CPU_MX6D:
+ board_type = BOARD_IS_MARSBOARD;
+ break;
+ }
+ arch_cpu_init();
+
+ /* setup GP timer */
+ timer_init();
+
+#ifdef CONFIG_SPL_SERIAL_SUPPORT
+ setup_iomux_uart();
+ preloader_console_init();
+#endif
+}
+
+void board_boot_order(u32 *spl_boot_list)
+{
+ spl_boot_list[0] = BOOT_DEVICE_MMC1;
+}
+
+/*
+ * In order to jump to standard u-boot shell, you have to connect pin 5 of J13
+ * to pin 3 (ground).
+ */
+int spl_start_uboot(void)
+{
+ int gpio_key = IMX_GPIO_NR(4, 16);
+
+ gpio_direction_input(gpio_key);
+ if (gpio_get_value(gpio_key) == 0)
+ return 1;
+ else
+ return 0;
+}
+
+#endif
--- /dev/null
+if TARGET_IMX8MQ_EVK
+
+config SYS_BOARD
+ default "imx8mq_evk"
+
+config SYS_VENDOR
+ default "freescale"
+
+config SYS_CONFIG_NAME
+ default "imx8mq_evk"
+
+endif
--- /dev/null
+i.MX8MQ EVK BOARD
+M: Peng Fan <peng.fan@nxp.com>
+S: Maintained
+F: board/freescale/imx8mq_evk/
+F: include/configs/imx8mq_evk.h
+F: configs/imx8mq_evk_defconfig
--- /dev/null
+#
+# Copyright 2017 NXP
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += imx8mq_evk.o
+
+ifdef CONFIG_SPL_BUILD
+obj-y += spl.o
+obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing.o lpddr4_timing_b0.o
+endif
--- /dev/null
+U-Boot for the NXP i.MX8MQ EVK board
+
+Quick Start
+====================
+- Build the ARM Trusted firmware binary
+- Get ddr and hdmi fimware
+- Build U-Boot
+- Boot
+
+Get and Build the ARM Trusted firmware
+====================
+Get ATF from: https://source.codeaurora.org/external/imx/imx-atf
+branch: imx_4.14.62_1.0.0_beta
+$ make PLAT=imx8mq bl31
+
+Get the ddr and hdmi firmware
+====================
+Note: srctree is U-Boot source directory
+$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-7.9.bin
+$ chmod +x firmware-imx-7.9.bin
+$ cp firmware-imx-7.9/firmware/hdmi/cadence/signed_hdmi_imx8m.bin $(srctree)
+$ cp firmware-imx-7.9/firmware-imx-7.9/firmware/ddr/synopsys/lpddr4*.bin $(srctee)
+
+Build U-Boot
+====================
+$ export ARCH=arm64
+$ export CROSS_COMPILE=aarch64-poky-linux-
+$ make imx8mq_evk_defconfig
+$ make flash.bin
+
+Burn the flash.bin to MicroSD card offset 33KB
+$sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=33
+
+Boot
+====================
+Set Boot switch SW801: 1100 and Bmode: 10 to boot from Micro SD.
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <asm/mach-imx/iomux-v3.h>
+#include <asm-generic/gpio.h>
+#include <fsl_esdhc.h>
+#include <mmc.h>
+#include <asm/arch/imx8mq_pins.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/mach-imx/gpio.h>
+#include <asm/mach-imx/mxc_i2c.h>
+#include <asm/arch/clock.h>
+#include <spl.h>
+#include <power/pmic.h>
+#include <power/pfuze100_pmic.h>
+#include "../common/pfuze.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_FSEL1)
+
+#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_HYS | PAD_CTL_PUE)
+
+static iomux_v3_cfg_t const wdog_pads[] = {
+ IMX8MQ_PAD_GPIO1_IO02__WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const uart_pads[] = {
+ IMX8MQ_PAD_UART1_RXD__UART1_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
+ IMX8MQ_PAD_UART1_TXD__UART1_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+int board_early_init_f(void)
+{
+ struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
+
+ imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
+ set_wdog_reset(wdog);
+
+ imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ /* rom_pointer[1] contains the size of TEE occupies */
+ if (rom_pointer[1])
+ gd->ram_size = PHYS_SDRAM_SIZE - rom_pointer[1];
+ else
+ gd->ram_size = PHYS_SDRAM_SIZE;
+
+ return 0;
+}
+
+#ifdef CONFIG_FEC_MXC
+#define FEC_RST_PAD IMX_GPIO_NR(1, 9)
+static iomux_v3_cfg_t const fec1_rst_pads[] = {
+ IMX8MQ_PAD_GPIO1_IO09__GPIO1_IO9 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+static void setup_iomux_fec(void)
+{
+ imx_iomux_v3_setup_multiple_pads(fec1_rst_pads,
+ ARRAY_SIZE(fec1_rst_pads));
+
+ gpio_request(IMX_GPIO_NR(1, 9), "fec1_rst");
+ gpio_direction_output(IMX_GPIO_NR(1, 9), 0);
+ udelay(500);
+ gpio_direction_output(IMX_GPIO_NR(1, 9), 1);
+}
+
+static int setup_fec(void)
+{
+ struct iomuxc_gpr_base_regs *gpr =
+ (struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR;
+
+ setup_iomux_fec();
+
+ /* Use 125M anatop REF_CLK1 for ENET1, not from external */
+ clrsetbits_le32(&gpr->gpr[1], BIT(13) | BIT(17), 0);
+ return set_clk_enet(ENET_125MHZ);
+}
+
+int board_phy_config(struct phy_device *phydev)
+{
+ /* enable rgmii rxc skew and phy mode select to RGMII copper */
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x8);
+
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100);
+
+ if (phydev->drv->config)
+ phydev->drv->config(phydev);
+ return 0;
+}
+#endif
+
+int board_init(void)
+{
+#ifdef CONFIG_FEC_MXC
+ setup_fec();
+#endif
+
+ return 0;
+}
+
+int board_mmc_get_env_dev(int devno)
+{
+ return devno;
+}
+
+int board_late_init(void)
+{
+#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+ env_set("board_name", "EVK");
+ env_set("board_rev", "iMX8MQ");
+#endif
+
+ return 0;
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+#include <linux/kernel.h>
+#include <common.h>
+#include <asm/arch/ddr.h>
+#include <asm/arch/lpddr4_define.h>
+
+#define WR_POST_EXT_3200 /* recommened to define */
+
+struct dram_cfg_param lpddr4_ddrc_cfg[] = {
+ /* Start to config, default 3200mbps */
+ { DDRC_DBG1(0), 0x00000001 },
+ { DDRC_PWRCTL(0), 0x00000001 },
+ { DDRC_MSTR(0), 0xa3080020 },
+ { DDRC_MSTR2(0), 0x00000000 },
+ { DDRC_RFSHTMG(0), 0x006100E0 },
+ { DDRC_INIT0(0), 0xC003061B },
+ { DDRC_INIT1(0), 0x009D0000 },
+ { DDRC_INIT3(0), 0x00D4002D },
+#ifdef WR_POST_EXT_3200
+ { DDRC_INIT4(0), 0x00330008 },
+#else
+ { DDRC_INIT4(0), 0x00310008 },
+#endif
+ { DDRC_INIT6(0), 0x0066004a },
+ { DDRC_INIT7(0), 0x0006004a },
+
+ { DDRC_DRAMTMG0(0), 0x1A201B22 },
+ { DDRC_DRAMTMG1(0), 0x00060633 },
+ { DDRC_DRAMTMG3(0), 0x00C0C000 },
+ { DDRC_DRAMTMG4(0), 0x0F04080F },
+ { DDRC_DRAMTMG5(0), 0x02040C0C },
+ { DDRC_DRAMTMG6(0), 0x01010007 },
+ { DDRC_DRAMTMG7(0), 0x00000401 },
+ { DDRC_DRAMTMG12(0), 0x00020600 },
+ { DDRC_DRAMTMG13(0), 0x0C100002 },
+ { DDRC_DRAMTMG14(0), 0x000000E6 },
+ { DDRC_DRAMTMG17(0), 0x00A00050 },
+
+ { DDRC_ZQCTL0(0), 0x03200018 },
+ { DDRC_ZQCTL1(0), 0x028061A8 },
+ { DDRC_ZQCTL2(0), 0x00000000 },
+
+ { DDRC_DFITMG0(0), 0x0497820A },
+ { DDRC_DFITMG1(0), 0x00080303 },
+ { DDRC_DFIUPD0(0), 0xE0400018 },
+ { DDRC_DFIUPD1(0), 0x00DF00E4 },
+ { DDRC_DFIUPD2(0), 0x80000000 },
+ { DDRC_DFIMISC(0), 0x00000011 },
+ { DDRC_DFITMG2(0), 0x0000170A },
+
+ { DDRC_DBICTL(0), 0x00000001 },
+ { DDRC_DFIPHYMSTR(0), 0x00000001 },
+ { DDRC_RANKCTL(0), 0x00000c99 },
+ { DDRC_DRAMTMG2(0), 0x070E171a },
+
+ /* address mapping */
+ { DDRC_ADDRMAP0(0), 0x00000015 },
+ { DDRC_ADDRMAP3(0), 0x00000000 },
+ { DDRC_ADDRMAP4(0), 0x00001F1F },
+ /* bank interleave */
+ { DDRC_ADDRMAP1(0), 0x00080808 },
+ { DDRC_ADDRMAP5(0), 0x07070707 },
+ { DDRC_ADDRMAP6(0), 0x08080707 },
+
+ /* performance setting */
+ { DDRC_ODTCFG(0), 0x0b060908 },
+ { DDRC_ODTMAP(0), 0x00000000 },
+ { DDRC_SCHED(0), 0x29511505 },
+ { DDRC_SCHED1(0), 0x0000002c },
+ { DDRC_PERFHPR1(0), 0x5900575b },
+ { DDRC_PERFLPR1(0), 0x00000009 },
+ { DDRC_PERFWR1(0), 0x02005574 },
+ { DDRC_DBG0(0), 0x00000016 },
+ { DDRC_DBG1(0), 0x00000000 },
+ { DDRC_DBGCMD(0), 0x00000000 },
+ { DDRC_SWCTL(0), 0x00000001 },
+ { DDRC_POISONCFG(0), 0x00000011 },
+ { DDRC_PCCFG(0), 0x00000111 },
+ { DDRC_PCFGR_0(0), 0x000010f3 },
+ { DDRC_PCFGW_0(0), 0x000072ff },
+ { DDRC_PCTRL_0(0), 0x00000001 },
+ { DDRC_PCFGQOS0_0(0), 0x01110d00 },
+ { DDRC_PCFGQOS1_0(0), 0x00620790 },
+ { DDRC_PCFGWQOS0_0(0), 0x00100001 },
+ { DDRC_PCFGWQOS1_0(0), 0x0000041f },
+
+ /* Frequency 1: 400mbps */
+ { DDRC_FREQ1_DRAMTMG0(0), 0x0d0b010c },
+ { DDRC_FREQ1_DRAMTMG1(0), 0x00030410 },
+ { DDRC_FREQ1_DRAMTMG2(0), 0x0305090c },
+ { DDRC_FREQ1_DRAMTMG3(0), 0x00505006 },
+ { DDRC_FREQ1_DRAMTMG4(0), 0x05040305 },
+ { DDRC_FREQ1_DRAMTMG5(0), 0x0d0e0504 },
+ { DDRC_FREQ1_DRAMTMG6(0), 0x0a060004 },
+ { DDRC_FREQ1_DRAMTMG7(0), 0x0000090e },
+ { DDRC_FREQ1_DRAMTMG14(0), 0x00000032 },
+ { DDRC_FREQ1_DRAMTMG15(0), 0x00000000 },
+ { DDRC_FREQ1_DRAMTMG17(0), 0x0036001b },
+ { DDRC_FREQ1_DERATEINT(0), 0x7e9fbeb1 },
+ { DDRC_FREQ1_DFITMG0(0), 0x03818200 },
+ { DDRC_FREQ1_DFITMG2(0), 0x00000000 },
+ { DDRC_FREQ1_RFSHTMG(0), 0x000C001c },
+ { DDRC_FREQ1_INIT3(0), 0x00840000 },
+ { DDRC_FREQ1_INIT4(0), 0x00310008 },
+ { DDRC_FREQ1_INIT6(0), 0x0066004a },
+ { DDRC_FREQ1_INIT7(0), 0x0006004a },
+
+ /* Frequency 2: 100mbps */
+ { DDRC_FREQ2_DRAMTMG0(0), 0x0d0b010c },
+ { DDRC_FREQ2_DRAMTMG1(0), 0x00030410 },
+ { DDRC_FREQ2_DRAMTMG2(0), 0x0305090c },
+ { DDRC_FREQ2_DRAMTMG3(0), 0x00505006 },
+ { DDRC_FREQ2_DRAMTMG4(0), 0x05040305 },
+ { DDRC_FREQ2_DRAMTMG5(0), 0x0d0e0504 },
+ { DDRC_FREQ2_DRAMTMG6(0), 0x0a060004 },
+ { DDRC_FREQ2_DRAMTMG7(0), 0x0000090e },
+ { DDRC_FREQ2_DRAMTMG14(0), 0x00000032 },
+ { DDRC_FREQ2_DRAMTMG17(0), 0x0036001b },
+ { DDRC_FREQ2_DERATEINT(0), 0x7e9fbeb1 },
+ { DDRC_FREQ2_DFITMG0(0), 0x03818200 },
+ { DDRC_FREQ2_DFITMG2(0), 0x00000000 },
+ { DDRC_FREQ2_RFSHTMG(0), 0x00030007 },
+ { DDRC_FREQ2_INIT3(0), 0x00840000 },
+ { DDRC_FREQ2_INIT4(0), 0x00310008 },
+ { DDRC_FREQ2_INIT6(0), 0x0066004a },
+ { DDRC_FREQ2_INIT7(0), 0x0006004a },
+};
+
+/* PHY Initialize Configuration */
+struct dram_cfg_param lpddr4_ddrphy_cfg[] = {
+ { 0x20110, 0x02 },
+ { 0x20111, 0x03 },
+ { 0x20112, 0x04 },
+ { 0x20113, 0x05 },
+ { 0x20114, 0x00 },
+ { 0x20115, 0x01 },
+
+ { 0x1005f, 0x1ff },
+ { 0x1015f, 0x1ff },
+ { 0x1105f, 0x1ff },
+ { 0x1115f, 0x1ff },
+ { 0x1205f, 0x1ff },
+ { 0x1215f, 0x1ff },
+ { 0x1305f, 0x1ff },
+ { 0x1315f, 0x1ff },
+
+ { 0x11005f, 0x1ff },
+ { 0x11015f, 0x1ff },
+ { 0x11105f, 0x1ff },
+ { 0x11115f, 0x1ff },
+ { 0x11205f, 0x1ff },
+ { 0x11215f, 0x1ff },
+ { 0x11305f, 0x1ff },
+ { 0x11315f, 0x1ff },
+
+ { 0x21005f, 0x1ff },
+ { 0x21015f, 0x1ff },
+ { 0x21105f, 0x1ff },
+ { 0x21115f, 0x1ff },
+ { 0x21205f, 0x1ff },
+ { 0x21215f, 0x1ff },
+ { 0x21305f, 0x1ff },
+ { 0x21315f, 0x1ff },
+
+ { 0x55, 0x1ff },
+ { 0x1055, 0x1ff },
+ { 0x2055, 0x1ff },
+ { 0x3055, 0x1ff },
+ { 0x4055, 0x1ff },
+ { 0x5055, 0x1ff },
+ { 0x6055, 0x1ff },
+ { 0x7055, 0x1ff },
+ { 0x8055, 0x1ff },
+ { 0x9055, 0x1ff },
+
+ { 0x200c5, 0x19 },
+ { 0x1200c5, 0x7 },
+ { 0x2200c5, 0x7 },
+
+ { 0x2002e, 0x2 },
+ { 0x12002e, 0x2 },
+ { 0x22002e, 0x2 },
+
+ { 0x90204, 0x0 },
+ { 0x190204, 0x0 },
+ { 0x290204, 0x0 },
+
+#ifdef WR_POST_EXT_3200
+ { 0x20024, 0xeb },
+#else
+ { 0x20024, 0xab },
+#endif
+ { 0x2003a, 0x0 },
+ { 0x120024, 0xab },
+ { 0x2003a, 0x0 },
+ { 0x220024, 0xab },
+ { 0x2003a, 0x0 },
+ { 0x20056, 0x3 },
+ { 0x120056, 0xa },
+ { 0x220056, 0xa },
+ { 0x1004d, 0xe00 },
+ { 0x1014d, 0xe00 },
+ { 0x1104d, 0xe00 },
+ { 0x1114d, 0xe00 },
+ { 0x1204d, 0xe00 },
+ { 0x1214d, 0xe00 },
+ { 0x1304d, 0xe00 },
+ { 0x1314d, 0xe00 },
+ { 0x11004d, 0xe00 },
+ { 0x11014d, 0xe00 },
+ { 0x11104d, 0xe00 },
+ { 0x11114d, 0xe00 },
+ { 0x11204d, 0xe00 },
+ { 0x11214d, 0xe00 },
+ { 0x11304d, 0xe00 },
+ { 0x11314d, 0xe00 },
+ { 0x21004d, 0xe00 },
+ { 0x21014d, 0xe00 },
+ { 0x21104d, 0xe00 },
+ { 0x21114d, 0xe00 },
+ { 0x21204d, 0xe00 },
+ { 0x21214d, 0xe00 },
+ { 0x21304d, 0xe00 },
+ { 0x21314d, 0xe00 },
+
+ { 0x10049, 0xfbe },
+ { 0x10149, 0xfbe },
+ { 0x11049, 0xfbe },
+ { 0x11149, 0xfbe },
+ { 0x12049, 0xfbe },
+ { 0x12149, 0xfbe },
+ { 0x13049, 0xfbe },
+ { 0x13149, 0xfbe },
+ { 0x110049, 0xfbe },
+ { 0x110149, 0xfbe },
+ { 0x111049, 0xfbe },
+ { 0x111149, 0xfbe },
+ { 0x112049, 0xfbe },
+ { 0x112149, 0xfbe },
+ { 0x113049, 0xfbe },
+ { 0x113149, 0xfbe },
+ { 0x210049, 0xfbe },
+ { 0x210149, 0xfbe },
+ { 0x211049, 0xfbe },
+ { 0x211149, 0xfbe },
+ { 0x212049, 0xfbe },
+ { 0x212149, 0xfbe },
+ { 0x213049, 0xfbe },
+ { 0x213149, 0xfbe },
+
+ { 0x43, ((LPDDR4_PHY_ADDR_RON << 5) | LPDDR4_PHY_ADDR_RON) },
+ { 0x1043, ((LPDDR4_PHY_ADDR_RON << 5) | LPDDR4_PHY_ADDR_RON) },
+ { 0x2043, ((LPDDR4_PHY_ADDR_RON << 5) | LPDDR4_PHY_ADDR_RON) },
+ { 0x3043, ((LPDDR4_PHY_ADDR_RON << 5) | LPDDR4_PHY_ADDR_RON) },
+ { 0x4043, ((LPDDR4_PHY_ADDR_RON << 5) | LPDDR4_PHY_ADDR_RON) },
+ { 0x5043, ((LPDDR4_PHY_ADDR_RON << 5) | LPDDR4_PHY_ADDR_RON) },
+ { 0x6043, ((LPDDR4_PHY_ADDR_RON << 5) | LPDDR4_PHY_ADDR_RON) },
+ { 0x7043, ((LPDDR4_PHY_ADDR_RON << 5) | LPDDR4_PHY_ADDR_RON) },
+ { 0x8043, ((LPDDR4_PHY_ADDR_RON << 5) | LPDDR4_PHY_ADDR_RON) },
+ { 0x9043, ((LPDDR4_PHY_ADDR_RON << 5) | LPDDR4_PHY_ADDR_RON) },
+
+ { 0x20018, 0x3 },
+ { 0x20075, 0x4 },
+ { 0x20050, 0x0 },
+ { 0x20008, 0x320 },
+ { 0x120008, 0x64 },
+ { 0x220008, 0x19 },
+ { 0x20088, 0x9 },
+ { 0x200b2, 0x104 },
+ { 0x10043, 0x5a1 },
+ { 0x10143, 0x5a1 },
+ { 0x11043, 0x5a1 },
+ { 0x11143, 0x5a1 },
+ { 0x12043, 0x5a1 },
+ { 0x12143, 0x5a1 },
+ { 0x13043, 0x5a1 },
+ { 0x13143, 0x5a1 },
+ { 0x1200b2, 0x104 },
+ { 0x110043, 0x5a1 },
+ { 0x110143, 0x5a1 },
+ { 0x111043, 0x5a1 },
+ { 0x111143, 0x5a1 },
+ { 0x112043, 0x5a1 },
+ { 0x112143, 0x5a1 },
+ { 0x113043, 0x5a1 },
+ { 0x113143, 0x5a1 },
+ { 0x2200b2, 0x104 },
+ { 0x210043, 0x5a1 },
+ { 0x210143, 0x5a1 },
+ { 0x211043, 0x5a1 },
+ { 0x211143, 0x5a1 },
+ { 0x212043, 0x5a1 },
+ { 0x212143, 0x5a1 },
+ { 0x213043, 0x5a1 },
+ { 0x213143, 0x5a1 },
+ { 0x200fa, 0x1 },
+ { 0x1200fa, 0x1 },
+ { 0x2200fa, 0x1 },
+ { 0x20019, 0x1 },
+ { 0x120019, 0x1 },
+ { 0x220019, 0x1 },
+ { 0x200f0, 0x660 },
+ { 0x200f1, 0x0 },
+ { 0x200f2, 0x4444 },
+ { 0x200f3, 0x8888 },
+ { 0x200f4, 0x5665 },
+ { 0x200f5, 0x0 },
+ { 0x200f6, 0x0 },
+ { 0x200f7, 0xf000 },
+ { 0x20025, 0x0 },
+ { 0x2002d, 0x0 },
+ { 0x12002d, 0x0 },
+ { 0x22002d, 0x0 },
+
+ { 0x200c7, 0x80 },
+ { 0x1200c7, 0x80 },
+ { 0x2200c7, 0x80 },
+ { 0x200ca, 0x106 },
+ { 0x1200ca, 0x106 },
+ { 0x2200ca, 0x106 },
+};
+
+/* P0 message block paremeter for training firmware */
+struct dram_cfg_param lpddr4_fsp0_cfg[] = {
+ { 0xd0000, 0x0 },
+ { 0x54000, 0x0 },
+ { 0x54001, 0x0 },
+ { 0x54002, 0x0 },
+ { 0x54003, 0xc80 },
+ { 0x54004, 0x2 },
+ { 0x54005, ((LPDDR4_PHY_RON << 8) | LPDDR4_PHY_RTT) }, /* PHY Ron/Rtt */
+ { 0x54006, LPDDR4_PHY_VREF_VALUE },
+ { 0x54007, 0x0 },
+ { 0x54008, 0x131f },
+ { 0x54009, LPDDR4_HDT_CTL_3200_1D },
+ { 0x5400a, 0x0 },
+ { 0x5400b, 0x2 },
+ { 0x5400c, 0x0 },
+ { 0x5400d, (LPDDR4_CATRAIN_3200_1d << 8) },
+ { 0x5400e, 0x0 },
+ { 0x5400f, 0x0 },
+ { 0x54010, 0x0 },
+ { 0x54011, 0x0 },
+ { 0x54012, 0x310 },
+ { 0x54013, 0x0 },
+ { 0x54014, 0x0 },
+ { 0x54015, 0x0 },
+ { 0x54016, 0x0 },
+ { 0x54017, 0x0 },
+ { 0x54018, 0x0 },
+
+ { 0x54019, 0x2dd4 },
+#ifdef WR_POST_EXT_3200
+ { 0x5401a, (((LPDDR4_RON) << 3) | 0x3) },
+#else
+ { 0x5401a, (((LPDDR4_RON) << 3) | 0x1) },
+#endif
+ { 0x5401b, ((LPDDR4_VREF_VALUE_CA << 8) |
+ (LPDDR4_RTT_CA_BANK0 << 4) | LPDDR4_RTT_DQ) },
+ { 0x5401c, ((LPDDR4_VREF_VALUE_DQ_RANK0 << 8) | 0x08) },
+ { 0x5401d, 0x0 },
+ { 0x5401e, LPDDR4_MR22_RANK0 },
+ { 0x5401f, 0x2dd4 },
+#ifdef WR_POST_EXT_3200
+ { 0x54020, (((LPDDR4_RON) << 3) | 0x3) },
+#else
+ { 0x54020, (((LPDDR4_RON) << 3) | 0x1) },
+#endif
+ { 0x54021, ((LPDDR4_VREF_VALUE_CA << 8) |
+ (LPDDR4_RTT_CA_BANK1 << 4) | LPDDR4_RTT_DQ) },
+ { 0x54022, ((LPDDR4_VREF_VALUE_DQ_RANK1 << 8) | 0x08) },
+ { 0x54023, 0x0 },
+ { 0x54024, LPDDR4_MR22_RANK1 },
+
+ { 0x54025, 0x0 },
+ { 0x54026, 0x0 },
+ { 0x54027, 0x0 },
+ { 0x54028, 0x0 },
+ { 0x54029, 0x0 },
+ { 0x5402a, 0x0 },
+ { 0x5402b, 0x1000 },
+ { 0x5402c, 0x3 },
+ { 0x5402d, 0x0 },
+ { 0x5402e, 0x0 },
+ { 0x5402f, 0x0 },
+ { 0x54030, 0x0 },
+ { 0x54031, 0x0 },
+ { 0x54032, 0xd400 },
+ /* MR3/MR2 */
+#ifdef WR_POST_EXT_3200
+ { 0x54033, ((((LPDDR4_RON) << 3) | 0x3) << 8) | 0x2d /*0x312d*/ },
+#else
+ { 0x54033, ((((LPDDR4_RON) << 3) | 0x1) << 8) | 0x2d/*0x312d*/ },
+#endif
+ /* MR11/MR4 */
+ { 0x54034, (((LPDDR4_RTT_CA_BANK0 << 4) | LPDDR4_RTT_DQ) << 8) },
+ /* self:0x284d//MR13/MR12 */
+ { 0x54035, (0x0800 | LPDDR4_VREF_VALUE_CA)/*0x084d*/ },
+ /* MR16/MR14*/
+ { 0x54036, LPDDR4_VREF_VALUE_DQ_RANK0/*0x4d*/ },
+ { 0x54037, (LPDDR4_MR22_RANK0 << 8)/*0x500*/ },
+ /* MR1 */
+ { 0x54038, 0xd400 },
+ /* MR3/MR2 */
+#ifdef WR_POST_EXT_3200
+ { 0x54039, ((((LPDDR4_RON) << 3) | 0x3) << 8) | 0x2d/*0x312d*/ },
+#else
+ { 0x54039, ((((LPDDR4_RON) << 3) | 0x1) << 8) | 0x2d/*0x312d*/ },
+#endif
+ /* MR11/MR4 */
+ { 0x5403a, (((LPDDR4_RTT_CA_BANK1 << 4) | LPDDR4_RTT_DQ) << 8) },
+ /* self:0x284d//MR13/MR12 */
+ { 0x5403b, (0x0800 | LPDDR4_VREF_VALUE_CA)/*0x084d*/ },
+ /* MR16/MR14 */
+ { 0x5403c, LPDDR4_VREF_VALUE_DQ_RANK1/*0x4d*/ },
+ { 0x5403d, (LPDDR4_MR22_RANK1 << 8)/*0x500*/ },
+ /* { 0x5403d, 0x500 } */
+ { 0x5403d, (LPDDR4_MR22_RANK1 << 8)/*0x500*/ },
+ { 0x5403e, 0x0 },
+ { 0x5403f, 0x0 },
+ { 0x54040, 0x0 },
+ { 0x54041, 0x0 },
+ { 0x54042, 0x0 },
+ { 0x54043, 0x0 },
+ { 0x54044, 0x0 },
+ { 0xd0000, 0x1 },
+};
+
+/* P1 message block paremeter for training firmware */
+struct dram_cfg_param lpddr4_fsp1_cfg[] = {
+ { 0xd0000, 0x0 },
+ { 0x54000, 0x0 },
+ { 0x54001, 0x0 },
+ { 0x54002, 0x101 },
+ { 0x54003, 0x190 },
+ { 0x54004, 0x2 },
+ /* PHY Ron/Rtt */
+ { 0x54005, ((LPDDR4_PHY_RON << 8) | LPDDR4_PHY_RTT)/*0x2828*/ },
+ { 0x54006, LPDDR4_PHY_VREF_VALUE },
+ { 0x54007, 0x0 },
+ { 0x54008, LPDDR4_TRAIN_SEQ_400 },
+ { 0x54009, LPDDR4_HDT_CTL_400_1D },
+ { 0x5400a, 0x0 },
+ { 0x5400b, 0x2 },
+ { 0x5400c, 0x0 },
+ { 0x5400d, (LPDDR4_CATRAIN_400 << 8) },
+ { 0x5400e, 0x0 },
+ { 0x5400f, 0x0 },
+ { 0x54010, 0x0 },
+ { 0x54011, 0x0 },
+ { 0x54012, 0x310 },
+ { 0x54013, 0x0 },
+ { 0x54014, 0x0 },
+ { 0x54015, 0x0 },
+ { 0x54016, 0x0 },
+ { 0x54017, 0x0 },
+ { 0x54018, 0x0 },
+ { 0x54019, 0x84 },
+ /* MR4/MR3 */
+ { 0x5401a, (((LPDDR4_RON) << 3) | 0x1)/*0x31*/ },
+ /* MR12/MR11 */
+ { 0x5401b, ((LPDDR4_VREF_VALUE_CA << 8) | (LPDDR4_RTT_CA << 4) |
+ LPDDR4_RTT_DQ)/*0x4d46*/ },
+ /* self:0x4d28//MR14/MR13 */
+ { 0x5401c, ((LPDDR4_VREF_VALUE_DQ_RANK0 << 8) | 0x08)/*0x4d08*/ },
+ { 0x5401d, 0x0 },
+ { 0x5401e, LPDDR4_MR22_RANK0/*0x5*/ },
+ { 0x5401f, 0x84 },
+ { 0x54020, (((LPDDR4_RON) << 3) | 0x1)/*0x31*/ }, /* MR4/MR3 */
+ { 0x54021, ((LPDDR4_VREF_VALUE_CA << 8) | (LPDDR4_RTT_CA << 4) |
+ LPDDR4_RTT_DQ)/*0x4d46*/ },/* MR12/MR11 */
+ /* self:0x4d28//MR14/MR13 */
+ { 0x54022, ((LPDDR4_VREF_VALUE_DQ_RANK1 << 8) | 0x08)/*0x4d08*/ },
+ { 0x54023, 0x0 },
+ { 0x54024, LPDDR4_MR22_RANK1 },
+ { 0x54025, 0x0 },
+ { 0x54026, 0x0 },
+ { 0x54027, 0x0 },
+ { 0x54028, 0x0 },
+ { 0x54029, 0x0 },
+ { 0x5402a, 0x0 },
+ { 0x5402b, 0x1000 },
+ { 0x5402c, 0x3 },
+ { 0x5402d, 0x0 },
+ { 0x5402e, 0x0 },
+ { 0x5402f, 0x0 },
+ { 0x54030, 0x0 },
+ { 0x54031, 0x0 },
+ { 0x54032, 0x8400 },
+ { 0x54033, ((((LPDDR4_RON) << 3) | 0x1) << 8) | 0x00 },
+ { 0x54034, (((LPDDR4_RTT_CA << 4) | LPDDR4_RTT_DQ) << 8) },
+ { 0x54035, (0x0800 | LPDDR4_VREF_VALUE_CA) },
+ { 0x54036, LPDDR4_VREF_VALUE_DQ_RANK0 },
+ { 0x54037, (LPDDR4_MR22_RANK0 << 8) },
+ { 0x54038, 0x8400 },
+ { 0x54039, ((((LPDDR4_RON) << 3) | 0x1) << 8) | 0x00 },
+ { 0x5403a, (((LPDDR4_RTT_CA << 4) | LPDDR4_RTT_DQ) << 8) },
+ { 0x5403b, (0x0800 | LPDDR4_VREF_VALUE_CA) },
+ { 0x5403c, LPDDR4_VREF_VALUE_DQ_RANK1 },
+ { 0x5403d, (LPDDR4_MR22_RANK1 << 8) },
+ { 0x5403e, 0x0 },
+ { 0x5403f, 0x0 },
+ { 0x54040, 0x0 },
+ { 0x54041, 0x0 },
+ { 0x54042, 0x0 },
+ { 0x54043, 0x0 },
+ { 0x54044, 0x0 },
+ { 0xd0000, 0x1 },
+};
+
+/* P2 message block paremeter for training firmware */
+struct dram_cfg_param lpddr4_fsp2_cfg[] = {
+ { 0xd0000, 0x0 },
+ { 0x54000, 0x0 },
+ { 0x54001, 0x0 },
+ { 0x54002, 0x102 },
+ { 0x54003, 0x64 },
+ { 0x54004, 0x2 },
+ { 0x54005, ((LPDDR4_PHY_RON << 8) | LPDDR4_PHY_RTT) },
+ { 0x54006, LPDDR4_PHY_VREF_VALUE },
+ { 0x54007, 0x0 },
+ { 0x54008, LPDDR4_TRAIN_SEQ_100 },
+ { 0x54009, LPDDR4_HDT_CTL_100_1D },
+ { 0x5400a, 0x0 },
+ { 0x5400b, 0x2 },
+ { 0x5400c, 0x0 },
+ { 0x5400d, (LPDDR4_CATRAIN_100 << 8) },
+ { 0x5400e, 0x0 },
+ { 0x5400f, 0x0 },
+ { 0x54010, 0x0 },
+ { 0x54011, 0x0 },
+ { 0x54012, 0x310 },
+ { 0x54013, 0x0 },
+ { 0x54014, 0x0 },
+ { 0x54015, 0x0 },
+ { 0x54016, 0x0 },
+ { 0x54017, 0x0 },
+ { 0x54018, 0x0 },
+ { 0x54019, 0x84 },
+ { 0x5401a, (((LPDDR4_RON) << 3) | 0x1) },
+ { 0x5401b, ((LPDDR4_VREF_VALUE_CA << 8) | (LPDDR4_RTT_CA << 4) |
+ LPDDR4_RTT_DQ) },
+ { 0x5401c, ((LPDDR4_VREF_VALUE_DQ_RANK0 << 8) | 0x08) },
+ { 0x5401d, 0x0 },
+ { 0x5401e, LPDDR4_MR22_RANK0 },
+ { 0x5401f, 0x84 },
+ { 0x54020, (((LPDDR4_RON) << 3) | 0x1) },
+ { 0x54021, ((LPDDR4_VREF_VALUE_CA << 8) | (LPDDR4_RTT_CA << 4) |
+ LPDDR4_RTT_DQ) },
+ { 0x54022, ((LPDDR4_VREF_VALUE_DQ_RANK1 << 8) | 0x08) },
+ { 0x54023, 0x0 },
+ { 0x54024, LPDDR4_MR22_RANK1 },
+ { 0x54025, 0x0 },
+ { 0x54026, 0x0 },
+ { 0x54027, 0x0 },
+ { 0x54028, 0x0 },
+ { 0x54029, 0x0 },
+ { 0x5402a, 0x0 },
+ { 0x5402b, 0x1000 },
+ { 0x5402c, 0x3 },
+ { 0x5402d, 0x0 },
+ { 0x5402e, 0x0 },
+ { 0x5402f, 0x0 },
+ { 0x54030, 0x0 },
+ { 0x54031, 0x0 },
+ { 0x54032, 0x8400 },
+ { 0x54033, ((((LPDDR4_RON) << 3) | 0x1) << 8) | 0x00 },
+ { 0x54034, (((LPDDR4_RTT_CA << 4) | LPDDR4_RTT_DQ) << 8) },
+ { 0x54035, (0x0800 | LPDDR4_VREF_VALUE_CA) },
+ { 0x54036, LPDDR4_VREF_VALUE_DQ_RANK0 },
+ { 0x54037, (LPDDR4_MR22_RANK0 << 8) },
+ { 0x54038, 0x8400 },
+ { 0x54039, ((((LPDDR4_RON) << 3) | 0x1) << 8) | 0x00 },
+ { 0x5403a, (((LPDDR4_RTT_CA << 4) | LPDDR4_RTT_DQ) << 8) },
+ { 0x5403b, (0x0800 | LPDDR4_VREF_VALUE_CA) },
+ { 0x5403c, LPDDR4_VREF_VALUE_DQ_RANK1 },
+ { 0x5403d, (LPDDR4_MR22_RANK1 << 8) },
+ { 0x5403e, 0x0 },
+ { 0x5403f, 0x0 },
+ { 0x54040, 0x0 },
+ { 0x54041, 0x0 },
+ { 0x54042, 0x0 },
+ { 0x54043, 0x0 },
+ { 0x54044, 0x0 },
+ { 0xd0000, 0x1 },
+};
+
+/* P0 2D message block paremeter for training firmware */
+struct dram_cfg_param lpddr4_fsp0_2d_cfg[] = {
+ { 0xd0000, 0x0 },
+ { 0x54000, 0x0 },
+ { 0x54001, 0x0 },
+ { 0x54002, 0x0 },
+ { 0x54003, 0xc80 },
+ { 0x54004, 0x2 },
+ { 0x54005, ((LPDDR4_PHY_RON << 8) | LPDDR4_PHY_RTT) },
+ { 0x54006, LPDDR4_PHY_VREF_VALUE },
+ { 0x54007, 0x0 },
+ { 0x54008, 0x61 },
+ { 0x54009, LPDDR4_HDT_CTL_2D },
+ { 0x5400a, 0x0 },
+ { 0x5400b, 0x2 },
+ { 0x5400c, 0x0 },
+ { 0x5400d, (LPDDR4_CATRAIN_3200_2d << 8) },
+ { 0x5400e, 0x0 },
+ { 0x5400f, (LPDDR4_2D_SHARE << 8) | 0x00 },
+ { 0x54010, LPDDR4_2D_WEIGHT },
+ { 0x54011, 0x0 },
+ { 0x54012, 0x310 },
+ { 0x54013, 0x0 },
+ { 0x54014, 0x0 },
+ { 0x54015, 0x0 },
+ { 0x54016, 0x0 },
+ { 0x54017, 0x0 },
+ { 0x54018, 0x0 },
+ { 0x54019, 0x2dd4 },
+#ifdef WR_POST_EXT_3200
+ { 0x5401a, (((LPDDR4_RON) << 3) | 0x3) },
+#else
+ { 0x5401a, (((LPDDR4_RON) << 3) | 0x1) },
+#endif
+ { 0x5401b, ((LPDDR4_VREF_VALUE_CA << 8) |
+ (LPDDR4_RTT_CA_BANK0 << 4) | LPDDR4_RTT_DQ) },
+ { 0x5401c, ((LPDDR4_VREF_VALUE_DQ_RANK0 << 8) | 0x08) },
+ { 0x5401d, 0x0 },
+ { 0x5401e, LPDDR4_MR22_RANK0 },
+ { 0x5401f, 0x2dd4 },
+#ifdef WR_POST_EXT_3200
+ { 0x54020, (((LPDDR4_RON) << 3) | 0x3) },
+#else
+ { 0x54020, (((LPDDR4_RON) << 3) | 0x1) },
+#endif
+ { 0x54021, ((LPDDR4_VREF_VALUE_CA << 8) |
+ (LPDDR4_RTT_CA_BANK1 << 4) | LPDDR4_RTT_DQ) },
+ { 0x54022, ((LPDDR4_VREF_VALUE_DQ_RANK1 << 8) | 0x08) },
+ { 0x54023, 0x0 },
+ { 0x54024, LPDDR4_MR22_RANK1 },
+ { 0x54025, 0x0 },
+ { 0x54026, 0x0 },
+ { 0x54027, 0x0 },
+ { 0x54028, 0x0 },
+ { 0x54029, 0x0 },
+ { 0x5402a, 0x0 },
+ { 0x5402b, 0x1000 },
+ { 0x5402c, 0x3 },
+ { 0x5402d, 0x0 },
+ { 0x5402e, 0x0 },
+ { 0x5402f, 0x0 },
+ { 0x54030, 0x0 },
+ { 0x54031, 0x0 },
+
+ { 0x54032, 0xd400 },
+#ifdef WR_POST_EXT_3200
+ { 0x54033, ((((LPDDR4_RON) << 3) | 0x3) << 8) | 0x2d },
+#else
+ { 0x54033, ((((LPDDR4_RON) << 3) | 0x1) << 8) | 0x2d },
+#endif
+ { 0x54034, (((LPDDR4_RTT_CA_BANK0 << 4) | LPDDR4_RTT_DQ) << 8) },
+ { 0x54035, (0x0800 | LPDDR4_VREF_VALUE_CA) },
+ { 0x54036, LPDDR4_VREF_VALUE_DQ_RANK0 },
+ { 0x54037, (LPDDR4_MR22_RANK0 << 8) },
+ { 0x54038, 0xd400 },
+#ifdef WR_POST_EXT_3200
+ { 0x54039, ((((LPDDR4_RON) << 3) | 0x3) << 8) | 0x2d },
+#else
+ { 0x54039, ((((LPDDR4_RON) << 3) | 0x1) << 8) | 0x2d },
+#endif
+ { 0x5403a, (((LPDDR4_RTT_CA_BANK1 << 4) | LPDDR4_RTT_DQ) << 8) },
+ { 0x5403b, (0x0800 | LPDDR4_VREF_VALUE_CA) },
+ { 0x5403c, LPDDR4_VREF_VALUE_DQ_RANK1 },
+ { 0x5403d, (LPDDR4_MR22_RANK1 << 8) },
+ { 0x5403e, 0x0 },
+ { 0x5403f, 0x0 },
+ { 0x54040, 0x0 },
+ { 0x54041, 0x0 },
+ { 0x54042, 0x0 },
+ { 0x54043, 0x0 },
+ { 0x54044, 0x0 },
+ { 0xd0000, 0x1 },
+};
+
+/* DRAM PHY init engine image */
+struct dram_cfg_param lpddr4_phy_pie[] = {
+ { 0xd0000, 0x0 },
+ { 0x90000, 0x10 },
+ { 0x90001, 0x400 },
+ { 0x90002, 0x10e },
+ { 0x90003, 0x0 },
+ { 0x90004, 0x0 },
+ { 0x90005, 0x8 },
+ { 0x90029, 0xb },
+ { 0x9002a, 0x480 },
+ { 0x9002b, 0x109 },
+ { 0x9002c, 0x8 },
+ { 0x9002d, 0x448 },
+ { 0x9002e, 0x139 },
+ { 0x9002f, 0x8 },
+ { 0x90030, 0x478 },
+ { 0x90031, 0x109 },
+ { 0x90032, 0x0 },
+ { 0x90033, 0xe8 },
+ { 0x90034, 0x109 },
+ { 0x90035, 0x2 },
+ { 0x90036, 0x10 },
+ { 0x90037, 0x139 },
+ { 0x90038, 0xf },
+ { 0x90039, 0x7c0 },
+ { 0x9003a, 0x139 },
+ { 0x9003b, 0x44 },
+ { 0x9003c, 0x630 },
+ { 0x9003d, 0x159 },
+ { 0x9003e, 0x14f },
+ { 0x9003f, 0x630 },
+ { 0x90040, 0x159 },
+ { 0x90041, 0x47 },
+ { 0x90042, 0x630 },
+ { 0x90043, 0x149 },
+ { 0x90044, 0x4f },
+ { 0x90045, 0x630 },
+ { 0x90046, 0x179 },
+ { 0x90047, 0x8 },
+ { 0x90048, 0xe0 },
+ { 0x90049, 0x109 },
+ { 0x9004a, 0x0 },
+ { 0x9004b, 0x7c8 },
+ { 0x9004c, 0x109 },
+ { 0x9004d, 0x0 },
+ { 0x9004e, 0x1 },
+ { 0x9004f, 0x8 },
+ { 0x90050, 0x0 },
+ { 0x90051, 0x45a },
+ { 0x90052, 0x9 },
+ { 0x90053, 0x0 },
+ { 0x90054, 0x448 },
+ { 0x90055, 0x109 },
+ { 0x90056, 0x40 },
+ { 0x90057, 0x630 },
+ { 0x90058, 0x179 },
+ { 0x90059, 0x1 },
+ { 0x9005a, 0x618 },
+ { 0x9005b, 0x109 },
+ { 0x9005c, 0x40c0 },
+ { 0x9005d, 0x630 },
+ { 0x9005e, 0x149 },
+ { 0x9005f, 0x8 },
+ { 0x90060, 0x4 },
+ { 0x90061, 0x48 },
+ { 0x90062, 0x4040 },
+ { 0x90063, 0x630 },
+ { 0x90064, 0x149 },
+ { 0x90065, 0x0 },
+ { 0x90066, 0x4 },
+ { 0x90067, 0x48 },
+ { 0x90068, 0x40 },
+ { 0x90069, 0x630 },
+ { 0x9006a, 0x149 },
+ { 0x9006b, 0x10 },
+ { 0x9006c, 0x4 },
+ { 0x9006d, 0x18 },
+ { 0x9006e, 0x0 },
+ { 0x9006f, 0x4 },
+ { 0x90070, 0x78 },
+ { 0x90071, 0x549 },
+ { 0x90072, 0x630 },
+ { 0x90073, 0x159 },
+ { 0x90074, 0xd49 },
+ { 0x90075, 0x630 },
+ { 0x90076, 0x159 },
+ { 0x90077, 0x94a },
+ { 0x90078, 0x630 },
+ { 0x90079, 0x159 },
+ { 0x9007a, 0x441 },
+ { 0x9007b, 0x630 },
+ { 0x9007c, 0x149 },
+ { 0x9007d, 0x42 },
+ { 0x9007e, 0x630 },
+ { 0x9007f, 0x149 },
+ { 0x90080, 0x1 },
+ { 0x90081, 0x630 },
+ { 0x90082, 0x149 },
+ { 0x90083, 0x0 },
+ { 0x90084, 0xe0 },
+ { 0x90085, 0x109 },
+ { 0x90086, 0xa },
+ { 0x90087, 0x10 },
+ { 0x90088, 0x109 },
+ { 0x90089, 0x9 },
+ { 0x9008a, 0x3c0 },
+ { 0x9008b, 0x149 },
+ { 0x9008c, 0x9 },
+ { 0x9008d, 0x3c0 },
+ { 0x9008e, 0x159 },
+ { 0x9008f, 0x18 },
+ { 0x90090, 0x10 },
+ { 0x90091, 0x109 },
+ { 0x90092, 0x0 },
+ { 0x90093, 0x3c0 },
+ { 0x90094, 0x109 },
+ { 0x90095, 0x18 },
+ { 0x90096, 0x4 },
+ { 0x90097, 0x48 },
+ { 0x90098, 0x18 },
+ { 0x90099, 0x4 },
+ { 0x9009a, 0x58 },
+ { 0x9009b, 0xa },
+ { 0x9009c, 0x10 },
+ { 0x9009d, 0x109 },
+ { 0x9009e, 0x2 },
+ { 0x9009f, 0x10 },
+ { 0x900a0, 0x109 },
+ { 0x900a1, 0x5 },
+ { 0x900a2, 0x7c0 },
+ { 0x900a3, 0x109 },
+ { 0x900a4, 0x10 },
+ { 0x900a5, 0x10 },
+ { 0x900a6, 0x109 },
+ { 0x40000, 0x811 },
+ { 0x40020, 0x880 },
+ { 0x40040, 0x0 },
+ { 0x40060, 0x0 },
+ { 0x40001, 0x4008 },
+ { 0x40021, 0x83 },
+ { 0x40041, 0x4f },
+ { 0x40061, 0x0 },
+ { 0x40002, 0x4040 },
+ { 0x40022, 0x83 },
+ { 0x40042, 0x51 },
+ { 0x40062, 0x0 },
+ { 0x40003, 0x811 },
+ { 0x40023, 0x880 },
+ { 0x40043, 0x0 },
+ { 0x40063, 0x0 },
+ { 0x40004, 0x720 },
+ { 0x40024, 0xf },
+ { 0x40044, 0x1740 },
+ { 0x40064, 0x0 },
+ { 0x40005, 0x16 },
+ { 0x40025, 0x83 },
+ { 0x40045, 0x4b },
+ { 0x40065, 0x0 },
+ { 0x40006, 0x716 },
+ { 0x40026, 0xf },
+ { 0x40046, 0x2001 },
+ { 0x40066, 0x0 },
+ { 0x40007, 0x716 },
+ { 0x40027, 0xf },
+ { 0x40047, 0x2800 },
+ { 0x40067, 0x0 },
+ { 0x40008, 0x716 },
+ { 0x40028, 0xf },
+ { 0x40048, 0xf00 },
+ { 0x40068, 0x0 },
+ { 0x40009, 0x720 },
+ { 0x40029, 0xf },
+ { 0x40049, 0x1400 },
+ { 0x40069, 0x0 },
+ { 0x4000a, 0xe08 },
+ { 0x4002a, 0xc15 },
+ { 0x4004a, 0x0 },
+ { 0x4006a, 0x0 },
+ { 0x4000b, 0x623 },
+ { 0x4002b, 0x15 },
+ { 0x4004b, 0x0 },
+ { 0x4006b, 0x0 },
+ { 0x4000c, 0x4028 },
+ { 0x4002c, 0x80 },
+ { 0x4004c, 0x0 },
+ { 0x4006c, 0x0 },
+ { 0x4000d, 0xe08 },
+ { 0x4002d, 0xc1a },
+ { 0x4004d, 0x0 },
+ { 0x4006d, 0x0 },
+ { 0x4000e, 0x623 },
+ { 0x4002e, 0x1a },
+ { 0x4004e, 0x0 },
+ { 0x4006e, 0x0 },
+ { 0x4000f, 0x4040 },
+ { 0x4002f, 0x80 },
+ { 0x4004f, 0x0 },
+ { 0x4006f, 0x0 },
+ { 0x40010, 0x2604 },
+ { 0x40030, 0x15 },
+ { 0x40050, 0x0 },
+ { 0x40070, 0x0 },
+ { 0x40011, 0x708 },
+ { 0x40031, 0x5 },
+ { 0x40051, 0x0 },
+ { 0x40071, 0x2002 },
+ { 0x40012, 0x8 },
+ { 0x40032, 0x80 },
+ { 0x40052, 0x0 },
+ { 0x40072, 0x0 },
+ { 0x40013, 0x2604 },
+ { 0x40033, 0x1a },
+ { 0x40053, 0x0 },
+ { 0x40073, 0x0 },
+ { 0x40014, 0x708 },
+ { 0x40034, 0xa },
+ { 0x40054, 0x0 },
+ { 0x40074, 0x2002 },
+ { 0x40015, 0x4040 },
+ { 0x40035, 0x80 },
+ { 0x40055, 0x0 },
+ { 0x40075, 0x0 },
+ { 0x40016, 0x60a },
+ { 0x40036, 0x15 },
+ { 0x40056, 0x1200 },
+ { 0x40076, 0x0 },
+ { 0x40017, 0x61a },
+ { 0x40037, 0x15 },
+ { 0x40057, 0x1300 },
+ { 0x40077, 0x0 },
+ { 0x40018, 0x60a },
+ { 0x40038, 0x1a },
+ { 0x40058, 0x1200 },
+ { 0x40078, 0x0 },
+ { 0x40019, 0x642 },
+ { 0x40039, 0x1a },
+ { 0x40059, 0x1300 },
+ { 0x40079, 0x0 },
+ { 0x4001a, 0x4808 },
+ { 0x4003a, 0x880 },
+ { 0x4005a, 0x0 },
+ { 0x4007a, 0x0 },
+ { 0x900a7, 0x0 },
+ { 0x900a8, 0x790 },
+ { 0x900a9, 0x11a },
+ { 0x900aa, 0x8 },
+ { 0x900ab, 0x7aa },
+ { 0x900ac, 0x2a },
+ { 0x900ad, 0x10 },
+ { 0x900ae, 0x7b2 },
+ { 0x900af, 0x2a },
+ { 0x900b0, 0x0 },
+ { 0x900b1, 0x7c8 },
+ { 0x900b2, 0x109 },
+ { 0x900b3, 0x10 },
+ { 0x900b4, 0x2a8 },
+ { 0x900b5, 0x129 },
+ { 0x900b6, 0x8 },
+ { 0x900b7, 0x370 },
+ { 0x900b8, 0x129 },
+ { 0x900b9, 0xa },
+ { 0x900ba, 0x3c8 },
+ { 0x900bb, 0x1a9 },
+ { 0x900bc, 0xc },
+ { 0x900bd, 0x408 },
+ { 0x900be, 0x199 },
+ { 0x900bf, 0x14 },
+ { 0x900c0, 0x790 },
+ { 0x900c1, 0x11a },
+ { 0x900c2, 0x8 },
+ { 0x900c3, 0x4 },
+ { 0x900c4, 0x18 },
+ { 0x900c5, 0xe },
+ { 0x900c6, 0x408 },
+ { 0x900c7, 0x199 },
+ { 0x900c8, 0x8 },
+ { 0x900c9, 0x8568 },
+ { 0x900ca, 0x108 },
+ { 0x900cb, 0x18 },
+ { 0x900cc, 0x790 },
+ { 0x900cd, 0x16a },
+ { 0x900ce, 0x8 },
+ { 0x900cf, 0x1d8 },
+ { 0x900d0, 0x169 },
+ { 0x900d1, 0x10 },
+ { 0x900d2, 0x8558 },
+ { 0x900d3, 0x168 },
+ { 0x900d4, 0x70 },
+ { 0x900d5, 0x788 },
+ { 0x900d6, 0x16a },
+ { 0x900d7, 0x1ff8 },
+ { 0x900d8, 0x85a8 },
+ { 0x900d9, 0x1e8 },
+ { 0x900da, 0x50 },
+ { 0x900db, 0x798 },
+ { 0x900dc, 0x16a },
+ { 0x900dd, 0x60 },
+ { 0x900de, 0x7a0 },
+ { 0x900df, 0x16a },
+ { 0x900e0, 0x8 },
+ { 0x900e1, 0x8310 },
+ { 0x900e2, 0x168 },
+ { 0x900e3, 0x8 },
+ { 0x900e4, 0xa310 },
+ { 0x900e5, 0x168 },
+ { 0x900e6, 0xa },
+ { 0x900e7, 0x408 },
+ { 0x900e8, 0x169 },
+ { 0x900e9, 0x6e },
+ { 0x900ea, 0x0 },
+ { 0x900eb, 0x68 },
+ { 0x900ec, 0x0 },
+ { 0x900ed, 0x408 },
+ { 0x900ee, 0x169 },
+ { 0x900ef, 0x0 },
+ { 0x900f0, 0x8310 },
+ { 0x900f1, 0x168 },
+ { 0x900f2, 0x0 },
+ { 0x900f3, 0xa310 },
+ { 0x900f4, 0x168 },
+ { 0x900f5, 0x1ff8 },
+ { 0x900f6, 0x85a8 },
+ { 0x900f7, 0x1e8 },
+ { 0x900f8, 0x68 },
+ { 0x900f9, 0x798 },
+ { 0x900fa, 0x16a },
+ { 0x900fb, 0x78 },
+ { 0x900fc, 0x7a0 },
+ { 0x900fd, 0x16a },
+ { 0x900fe, 0x68 },
+ { 0x900ff, 0x790 },
+ { 0x90100, 0x16a },
+ { 0x90101, 0x8 },
+ { 0x90102, 0x8b10 },
+ { 0x90103, 0x168 },
+ { 0x90104, 0x8 },
+ { 0x90105, 0xab10 },
+ { 0x90106, 0x168 },
+ { 0x90107, 0xa },
+ { 0x90108, 0x408 },
+ { 0x90109, 0x169 },
+ { 0x9010a, 0x58 },
+ { 0x9010b, 0x0 },
+ { 0x9010c, 0x68 },
+ { 0x9010d, 0x0 },
+ { 0x9010e, 0x408 },
+ { 0x9010f, 0x169 },
+ { 0x90110, 0x0 },
+ { 0x90111, 0x8b10 },
+ { 0x90112, 0x168 },
+ { 0x90113, 0x0 },
+ { 0x90114, 0xab10 },
+ { 0x90115, 0x168 },
+ { 0x90116, 0x0 },
+ { 0x90117, 0x1d8 },
+ { 0x90118, 0x169 },
+ { 0x90119, 0x80 },
+ { 0x9011a, 0x790 },
+ { 0x9011b, 0x16a },
+ { 0x9011c, 0x18 },
+ { 0x9011d, 0x7aa },
+ { 0x9011e, 0x6a },
+ { 0x9011f, 0xa },
+ { 0x90120, 0x0 },
+ { 0x90121, 0x1e9 },
+ { 0x90122, 0x8 },
+ { 0x90123, 0x8080 },
+ { 0x90124, 0x108 },
+ { 0x90125, 0xf },
+ { 0x90126, 0x408 },
+ { 0x90127, 0x169 },
+ { 0x90128, 0xc },
+ { 0x90129, 0x0 },
+ { 0x9012a, 0x68 },
+ { 0x9012b, 0x9 },
+ { 0x9012c, 0x0 },
+ { 0x9012d, 0x1a9 },
+ { 0x9012e, 0x0 },
+ { 0x9012f, 0x408 },
+ { 0x90130, 0x169 },
+ { 0x90131, 0x0 },
+ { 0x90132, 0x8080 },
+ { 0x90133, 0x108 },
+ { 0x90134, 0x8 },
+ { 0x90135, 0x7aa },
+ { 0x90136, 0x6a },
+ { 0x90137, 0x0 },
+ { 0x90138, 0x8568 },
+ { 0x90139, 0x108 },
+ { 0x9013a, 0xb7 },
+ { 0x9013b, 0x790 },
+ { 0x9013c, 0x16a },
+ { 0x9013d, 0x1f },
+ { 0x9013e, 0x0 },
+ { 0x9013f, 0x68 },
+ { 0x90140, 0x8 },
+ { 0x90141, 0x8558 },
+ { 0x90142, 0x168 },
+ { 0x90143, 0xf },
+ { 0x90144, 0x408 },
+ { 0x90145, 0x169 },
+ { 0x90146, 0xc },
+ { 0x90147, 0x0 },
+ { 0x90148, 0x68 },
+ { 0x90149, 0x0 },
+ { 0x9014a, 0x408 },
+ { 0x9014b, 0x169 },
+ { 0x9014c, 0x0 },
+ { 0x9014d, 0x8558 },
+ { 0x9014e, 0x168 },
+ { 0x9014f, 0x8 },
+ { 0x90150, 0x3c8 },
+ { 0x90151, 0x1a9 },
+ { 0x90152, 0x3 },
+ { 0x90153, 0x370 },
+ { 0x90154, 0x129 },
+ { 0x90155, 0x20 },
+ { 0x90156, 0x2aa },
+ { 0x90157, 0x9 },
+ { 0x90158, 0x0 },
+ { 0x90159, 0x400 },
+ { 0x9015a, 0x10e },
+ { 0x9015b, 0x8 },
+ { 0x9015c, 0xe8 },
+ { 0x9015d, 0x109 },
+ { 0x9015e, 0x0 },
+ { 0x9015f, 0x8140 },
+ { 0x90160, 0x10c },
+ { 0x90161, 0x10 },
+ { 0x90162, 0x8138 },
+ { 0x90163, 0x10c },
+ { 0x90164, 0x8 },
+ { 0x90165, 0x7c8 },
+ { 0x90166, 0x101 },
+ { 0x90167, 0x8 },
+ { 0x90168, 0x0 },
+ { 0x90169, 0x8 },
+ { 0x9016a, 0x8 },
+ { 0x9016b, 0x448 },
+ { 0x9016c, 0x109 },
+ { 0x9016d, 0xf },
+ { 0x9016e, 0x7c0 },
+ { 0x9016f, 0x109 },
+ { 0x90170, 0x0 },
+ { 0x90171, 0xe8 },
+ { 0x90172, 0x109 },
+ { 0x90173, 0x47 },
+ { 0x90174, 0x630 },
+ { 0x90175, 0x109 },
+ { 0x90176, 0x8 },
+ { 0x90177, 0x618 },
+ { 0x90178, 0x109 },
+ { 0x90179, 0x8 },
+ { 0x9017a, 0xe0 },
+ { 0x9017b, 0x109 },
+ { 0x9017c, 0x0 },
+ { 0x9017d, 0x7c8 },
+ { 0x9017e, 0x109 },
+ { 0x9017f, 0x8 },
+ { 0x90180, 0x8140 },
+ { 0x90181, 0x10c },
+ { 0x90182, 0x0 },
+ { 0x90183, 0x1 },
+ { 0x90184, 0x8 },
+ { 0x90185, 0x8 },
+ { 0x90186, 0x4 },
+ { 0x90187, 0x8 },
+ { 0x90188, 0x8 },
+ { 0x90189, 0x7c8 },
+ { 0x9018a, 0x101 },
+ { 0x90006, 0x0 },
+ { 0x90007, 0x0 },
+ { 0x90008, 0x8 },
+ { 0x90009, 0x0 },
+ { 0x9000a, 0x0 },
+ { 0x9000b, 0x0 },
+ { 0xd00e7, 0x400 },
+ { 0x90017, 0x0 },
+ { 0x9001f, 0x2a },
+ { 0x90026, 0x6a },
+ { 0x400d0, 0x0 },
+ { 0x400d1, 0x101 },
+ { 0x400d2, 0x105 },
+ { 0x400d3, 0x107 },
+ { 0x400d4, 0x10f },
+ { 0x400d5, 0x202 },
+ { 0x400d6, 0x20a },
+ { 0x400d7, 0x20b },
+ { 0x2003a, 0x2 },
+ { 0x2000b, 0x64 },
+ { 0x2000c, 0xc8 },
+ { 0x2000d, 0x7d0 },
+ { 0x2000e, 0x2c },
+ { 0x12000b, 0xc },
+ { 0x12000c, 0x19 },
+ { 0x12000d, 0xfa },
+ { 0x12000e, 0x10 },
+ { 0x22000b, 0x3 },
+ { 0x22000c, 0x6 },
+ { 0x22000d, 0x3e },
+ { 0x22000e, 0x10 },
+ { 0x9000c, 0x0 },
+ { 0x9000d, 0x173 },
+ { 0x9000e, 0x60 },
+ { 0x9000f, 0x6110 },
+ { 0x90010, 0x2152 },
+ { 0x90011, 0xdfbd },
+ { 0x90012, 0x60 },
+ { 0x90013, 0x6152 },
+ { 0x20010, 0x5a },
+ { 0x20011, 0x3 },
+ { 0x40080, 0xe0 },
+ { 0x40081, 0x12 },
+ { 0x40082, 0xe0 },
+ { 0x40083, 0x12 },
+ { 0x40084, 0xe0 },
+ { 0x40085, 0x12 },
+ { 0x140080, 0xe0 },
+ { 0x140081, 0x12 },
+ { 0x140082, 0xe0 },
+ { 0x140083, 0x12 },
+ { 0x140084, 0xe0 },
+ { 0x140085, 0x12 },
+ { 0x240080, 0xe0 },
+ { 0x240081, 0x12 },
+ { 0x240082, 0xe0 },
+ { 0x240083, 0x12 },
+ { 0x240084, 0xe0 },
+ { 0x240085, 0x12 },
+ { 0x400fd, 0xf },
+ { 0x10011, 0x1 },
+ { 0x10012, 0x1 },
+ { 0x10013, 0x180 },
+ { 0x10018, 0x1 },
+ { 0x10002, 0x6209 },
+ { 0x100b2, 0x1 },
+ { 0x101b4, 0x1 },
+ { 0x102b4, 0x1 },
+ { 0x103b4, 0x1 },
+ { 0x104b4, 0x1 },
+ { 0x105b4, 0x1 },
+ { 0x106b4, 0x1 },
+ { 0x107b4, 0x1 },
+ { 0x108b4, 0x1 },
+ { 0x11011, 0x1 },
+ { 0x11012, 0x1 },
+ { 0x11013, 0x180 },
+ { 0x11018, 0x1 },
+ { 0x11002, 0x6209 },
+ { 0x110b2, 0x1 },
+ { 0x111b4, 0x1 },
+ { 0x112b4, 0x1 },
+ { 0x113b4, 0x1 },
+ { 0x114b4, 0x1 },
+ { 0x115b4, 0x1 },
+ { 0x116b4, 0x1 },
+ { 0x117b4, 0x1 },
+ { 0x118b4, 0x1 },
+ { 0x12011, 0x1 },
+ { 0x12012, 0x1 },
+ { 0x12013, 0x180 },
+ { 0x12018, 0x1 },
+ { 0x12002, 0x6209 },
+ { 0x120b2, 0x1 },
+ { 0x121b4, 0x1 },
+ { 0x122b4, 0x1 },
+ { 0x123b4, 0x1 },
+ { 0x124b4, 0x1 },
+ { 0x125b4, 0x1 },
+ { 0x126b4, 0x1 },
+ { 0x127b4, 0x1 },
+ { 0x128b4, 0x1 },
+ { 0x13011, 0x1 },
+ { 0x13012, 0x1 },
+ { 0x13013, 0x180 },
+ { 0x13018, 0x1 },
+ { 0x13002, 0x6209 },
+ { 0x130b2, 0x1 },
+ { 0x131b4, 0x1 },
+ { 0x132b4, 0x1 },
+ { 0x133b4, 0x1 },
+ { 0x134b4, 0x1 },
+ { 0x135b4, 0x1 },
+ { 0x136b4, 0x1 },
+ { 0x137b4, 0x1 },
+ { 0x138b4, 0x1 },
+ { 0x2003a, 0x2 },
+ { 0xc0080, 0x2 },
+ { 0xd0000, 0x1 },
+};
+
+struct dram_fsp_msg lpddr4_dram_fsp_msg[] = {
+ {
+ /* P0 3200mts 1D */
+ .drate = 3200,
+ .fw_type = FW_1D_IMAGE,
+ .fsp_cfg = lpddr4_fsp0_cfg,
+ .fsp_cfg_num = ARRAY_SIZE(lpddr4_fsp0_cfg),
+ },
+ {
+ /* P1 400mts 1D */
+ .drate = 400,
+ .fw_type = FW_1D_IMAGE,
+ .fsp_cfg = lpddr4_fsp1_cfg,
+ .fsp_cfg_num = ARRAY_SIZE(lpddr4_fsp1_cfg),
+ },
+ {
+ /* P1 100mts 1D */
+ .drate = 100,
+ .fw_type = FW_1D_IMAGE,
+ .fsp_cfg = lpddr4_fsp2_cfg,
+ .fsp_cfg_num = ARRAY_SIZE(lpddr4_fsp2_cfg),
+ },
+ {
+ /* P0 3200mts 2D */
+ .drate = 3200,
+ .fw_type = FW_2D_IMAGE,
+ .fsp_cfg = lpddr4_fsp0_2d_cfg,
+ .fsp_cfg_num = ARRAY_SIZE(lpddr4_fsp0_2d_cfg),
+ },
+};
+
+/* lpddr4 timing config params on EVK board */
+struct dram_timing_info dram_timing = {
+ .ddrc_cfg = lpddr4_ddrc_cfg,
+ .ddrc_cfg_num = ARRAY_SIZE(lpddr4_ddrc_cfg),
+ .ddrphy_cfg = lpddr4_ddrphy_cfg,
+ .ddrphy_cfg_num = ARRAY_SIZE(lpddr4_ddrphy_cfg),
+ .fsp_msg = lpddr4_dram_fsp_msg,
+ .fsp_msg_num = ARRAY_SIZE(lpddr4_dram_fsp_msg),
+ .ddrphy_pie = lpddr4_phy_pie,
+ .ddrphy_pie_num = ARRAY_SIZE(lpddr4_phy_pie),
+ .fsp_table = { 3200, 400, 100, },
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+#include <linux/kernel.h>
+#include <common.h>
+#include <asm/arch/ddr.h>
+#include <asm/arch/lpddr4_define.h>
+
+#define WR_POST_EXT_3200 /* recommened to define */
+
+static struct dram_cfg_param lpddr4_ddrc_cfg[] = {
+ /* Start to config, default 3200mbps */
+ /* dis_dq=1, indicates no reads or writes are issued to SDRAM */
+ { DDRC_DBG1(0), 0x00000001 },
+ /* selfref_en=1, SDRAM enter self-refresh state */
+ { DDRC_PWRCTL(0), 0x00000001 },
+ { DDRC_MSTR(0), 0xa3080020 },
+ { DDRC_MSTR2(0), 0x00000000 },
+ { DDRC_RFSHTMG(0), 0x006100E0 },
+ { DDRC_INIT0(0), 0xC003061B },
+ { DDRC_INIT1(0), 0x009D0000 },
+ { DDRC_INIT3(0), 0x00D4002D },
+#ifdef WR_POST_EXT_3200 /* recommened to define */
+ { DDRC_INIT4(0), 0x00330008 },
+#else
+ { DDRC_INIT4(0), 0x00310008 },
+#endif
+ { DDRC_INIT6(0), 0x0066004a },
+ { DDRC_INIT7(0), 0x0006004a },
+
+ { DDRC_DRAMTMG0(0), 0x1A201B22 },
+ { DDRC_DRAMTMG1(0), 0x00060633 },
+ { DDRC_DRAMTMG3(0), 0x00C0C000 },
+ { DDRC_DRAMTMG4(0), 0x0F04080F },
+ { DDRC_DRAMTMG5(0), 0x02040C0C },
+ { DDRC_DRAMTMG6(0), 0x01010007 },
+ { DDRC_DRAMTMG7(0), 0x00000401 },
+ { DDRC_DRAMTMG12(0), 0x00020600 },
+ { DDRC_DRAMTMG13(0), 0x0C100002 },
+ { DDRC_DRAMTMG14(0), 0x000000E6 },
+ { DDRC_DRAMTMG17(0), 0x00A00050 },
+
+ { DDRC_ZQCTL0(0), 0x03200018 },
+ { DDRC_ZQCTL1(0), 0x028061A8 },
+ { DDRC_ZQCTL2(0), 0x00000000 },
+
+ { DDRC_DFITMG0(0), 0x0497820A },
+ { DDRC_DFITMG1(0), 0x00080303 },
+ { DDRC_DFIUPD0(0), 0xE0400018 },
+ { DDRC_DFIUPD1(0), 0x00DF00E4 },
+ { DDRC_DFIUPD2(0), 0x80000000 },
+ { DDRC_DFIMISC(0), 0x00000011 },
+ { DDRC_DFITMG2(0), 0x0000170A },
+
+ { DDRC_DBICTL(0), 0x00000001 },
+ { DDRC_DFIPHYMSTR(0), 0x00000001 },
+
+ /* need be refined by ddrphy trained value */
+ { DDRC_RANKCTL(0), 0x00000c99 },
+ { DDRC_DRAMTMG2(0), 0x070E171a },
+
+ /* address mapping */
+ /* Address map is from MSB 29: r15, r14, cs, r13-r0, b2-b0, c9-c0 */
+ { DDRC_ADDRMAP0(0), 0x00000015 },
+ { DDRC_ADDRMAP3(0), 0x00000000 },
+ /* addrmap_col_b10 addrmap_col_b11 set to de-activated (5-bit width) */
+ { DDRC_ADDRMAP4(0), 0x00001F1F },
+ /* bank interleave */
+ /* addrmap_bank_b2, addrmap_bank_b1, addrmap_bank_b0 */
+ { DDRC_ADDRMAP1(0), 0x00080808 },
+ /* addrmap_row_b11 addrmap_row_b10_b2 addrmap_row_b1 addrmap_row_b0 */
+ { DDRC_ADDRMAP5(0), 0x07070707 },
+ /* addrmap_row_b15 addrmap_row_b14 addrmap_row_b13 addrmap_row_b12 */
+ { DDRC_ADDRMAP6(0), 0x08080707 },
+
+ /* 667mts frequency setting */
+ { DDRC_FREQ1_DERATEEN(0), 0x0000000 },
+ { DDRC_FREQ1_DERATEINT(0), 0x0800000 },
+ { DDRC_FREQ1_RFSHCTL0(0), 0x0210000 },
+ { DDRC_FREQ1_RFSHTMG(0), 0x014001E },
+ { DDRC_FREQ1_INIT3(0), 0x0140009 },
+ { DDRC_FREQ1_INIT4(0), 0x00310008 },
+ { DDRC_FREQ1_INIT6(0), 0x0066004a },
+ { DDRC_FREQ1_INIT7(0), 0x0006004a },
+ { DDRC_FREQ1_DRAMTMG0(0), 0xB070A07 },
+ { DDRC_FREQ1_DRAMTMG1(0), 0x003040A },
+ { DDRC_FREQ1_DRAMTMG2(0), 0x305080C },
+ { DDRC_FREQ1_DRAMTMG3(0), 0x0505000 },
+ { DDRC_FREQ1_DRAMTMG4(0), 0x3040203 },
+ { DDRC_FREQ1_DRAMTMG5(0), 0x2030303 },
+ { DDRC_FREQ1_DRAMTMG6(0), 0x2020004 },
+ { DDRC_FREQ1_DRAMTMG7(0), 0x0000302 },
+ { DDRC_FREQ1_DRAMTMG12(0), 0x0020310 },
+ { DDRC_FREQ1_DRAMTMG13(0), 0xA100002 },
+ { DDRC_FREQ1_DRAMTMG14(0), 0x0000020 },
+ { DDRC_FREQ1_DRAMTMG17(0), 0x0220011 },
+ { DDRC_FREQ1_ZQCTL0(0), 0x0A70005 },
+ { DDRC_FREQ1_DFITMG0(0), 0x3858202 },
+ { DDRC_FREQ1_DFITMG1(0), 0x0000404 },
+ { DDRC_FREQ1_DFITMG2(0), 0x0000502 },
+
+ /* performance setting */
+ { DDRC_ODTCFG(0), 0x0b060908 },
+ { DDRC_ODTMAP(0), 0x00000000 },
+ { DDRC_SCHED(0), 0x29511505 },
+ { DDRC_SCHED1(0), 0x0000002c },
+ { DDRC_PERFHPR1(0), 0x5900575b },
+ /* 150T starve and 0x90 max tran len */
+ { DDRC_PERFLPR1(0), 0x90000096 },
+ /* 300T starve and 0x10 max tran len */
+ { DDRC_PERFWR1(0), 0x1000012c },
+ { DDRC_DBG0(0), 0x00000016 },
+ { DDRC_DBG1(0), 0x00000000 },
+ { DDRC_DBGCMD(0), 0x00000000 },
+ { DDRC_SWCTL(0), 0x00000001 },
+ { DDRC_POISONCFG(0), 0x00000011 },
+ { DDRC_PCCFG(0), 0x00000111 },
+ { DDRC_PCFGR_0(0), 0x000010f3 },
+ { DDRC_PCFGW_0(0), 0x000072ff },
+ { DDRC_PCTRL_0(0), 0x00000001 },
+ /* disable Read Qos*/
+ { DDRC_PCFGQOS0_0(0), 0x00000e00 },
+ { DDRC_PCFGQOS1_0(0), 0x0062ffff },
+ /* disable Write Qos*/
+ { DDRC_PCFGWQOS0_0(0), 0x00000e00 },
+ { DDRC_PCFGWQOS1_0(0), 0x0000ffff },
+ { DDRC_FREQ1_DERATEEN(0), 0x00000202 },
+ { DDRC_FREQ1_DERATEINT(0), 0xec78f4b5 },
+ { DDRC_FREQ1_RFSHCTL0(0), 0x00618040 },
+ { DDRC_FREQ1_RFSHTMG(0), 0x00610090 },
+};
+
+/* PHY Initialize Configuration */
+static struct dram_cfg_param lpddr4_ddrphy_cfg[] = {
+ { 0x20110, 0x02 }, /* MapCAB0toDFI */
+ { 0x20111, 0x03 }, /* MapCAB1toDFI */
+ { 0x20112, 0x04 }, /* MapCAB2toDFI */
+ { 0x20113, 0x05 }, /* MapCAB3toDFI */
+ { 0x20114, 0x00 }, /* MapCAB4toDFI */
+ { 0x20115, 0x01 }, /* MapCAB5toDFI */
+
+ /* Initialize PHY Configuration */
+ { 0x1005f, 0x1ff },
+ { 0x1015f, 0x1ff },
+ { 0x1105f, 0x1ff },
+ { 0x1115f, 0x1ff },
+ { 0x1205f, 0x1ff },
+ { 0x1215f, 0x1ff },
+ { 0x1305f, 0x1ff },
+ { 0x1315f, 0x1ff },
+
+ { 0x11005f, 0x1ff },
+ { 0x11015f, 0x1ff },
+ { 0x11105f, 0x1ff },
+ { 0x11115f, 0x1ff },
+ { 0x11205f, 0x1ff },
+ { 0x11215f, 0x1ff },
+ { 0x11305f, 0x1ff },
+ { 0x11315f, 0x1ff },
+
+ { 0x21005f, 0x1ff },
+ { 0x21015f, 0x1ff },
+ { 0x21105f, 0x1ff },
+ { 0x21115f, 0x1ff },
+ { 0x21205f, 0x1ff },
+ { 0x21215f, 0x1ff },
+ { 0x21305f, 0x1ff },
+ { 0x21315f, 0x1ff },
+
+ { 0x55, 0x1ff },
+ { 0x1055, 0x1ff },
+ { 0x2055, 0x1ff },
+ { 0x3055, 0x1ff },
+ { 0x4055, 0x1ff },
+ { 0x5055, 0x1ff },
+ { 0x6055, 0x1ff },
+ { 0x7055, 0x1ff },
+ { 0x8055, 0x1ff },
+ { 0x9055, 0x1ff },
+ { 0x200c5, 0x19 },
+ { 0x1200c5, 0x7 },
+ { 0x2200c5, 0x7 },
+ { 0x2002e, 0x2 },
+ { 0x12002e, 0x1 },
+ { 0x22002e, 0x2 },
+ { 0x90204, 0x0 },
+ { 0x190204, 0x0 },
+ { 0x290204, 0x0 },
+
+ { 0x20024, 0xe3 },
+ { 0x2003a, 0x2 },
+ { 0x120024, 0xa3 },
+ { 0x2003a, 0x2 },
+ { 0x220024, 0xa3 },
+ { 0x2003a, 0x2 },
+
+ { 0x20056, 0x3 },
+ { 0x120056, 0xa },
+ { 0x220056, 0xa },
+
+ { 0x1004d, 0xe00 },
+ { 0x1014d, 0xe00 },
+ { 0x1104d, 0xe00 },
+ { 0x1114d, 0xe00 },
+ { 0x1204d, 0xe00 },
+ { 0x1214d, 0xe00 },
+ { 0x1304d, 0xe00 },
+ { 0x1314d, 0xe00 },
+ { 0x11004d, 0xe00 },
+ { 0x11014d, 0xe00 },
+ { 0x11104d, 0xe00 },
+ { 0x11114d, 0xe00 },
+ { 0x11204d, 0xe00 },
+ { 0x11214d, 0xe00 },
+ { 0x11304d, 0xe00 },
+ { 0x11314d, 0xe00 },
+ { 0x21004d, 0xe00 },
+ { 0x21014d, 0xe00 },
+ { 0x21104d, 0xe00 },
+ { 0x21114d, 0xe00 },
+ { 0x21204d, 0xe00 },
+ { 0x21214d, 0xe00 },
+ { 0x21304d, 0xe00 },
+ { 0x21314d, 0xe00 },
+
+ { 0x10049, 0xfbe },
+ { 0x10149, 0xfbe },
+ { 0x11049, 0xfbe },
+ { 0x11149, 0xfbe },
+ { 0x12049, 0xfbe },
+ { 0x12149, 0xfbe },
+ { 0x13049, 0xfbe },
+ { 0x13149, 0xfbe },
+
+ { 0x110049, 0xfbe },
+ { 0x110149, 0xfbe },
+ { 0x111049, 0xfbe },
+ { 0x111149, 0xfbe },
+ { 0x112049, 0xfbe },
+ { 0x112149, 0xfbe },
+ { 0x113049, 0xfbe },
+ { 0x113149, 0xfbe },
+
+ { 0x210049, 0xfbe },
+ { 0x210149, 0xfbe },
+ { 0x211049, 0xfbe },
+ { 0x211149, 0xfbe },
+ { 0x212049, 0xfbe },
+ { 0x212149, 0xfbe },
+ { 0x213049, 0xfbe },
+ { 0x213149, 0xfbe },
+
+ { 0x43, 0x63 },
+ { 0x1043, 0x63 },
+ { 0x2043, 0x63 },
+ { 0x3043, 0x63 },
+ { 0x4043, 0x63 },
+ { 0x5043, 0x63 },
+ { 0x6043, 0x63 },
+ { 0x7043, 0x63 },
+ { 0x8043, 0x63 },
+ { 0x9043, 0x63 },
+
+ { 0x20018, 0x3 },
+ { 0x20075, 0x4 },
+ { 0x20050, 0x0 },
+ { 0x20008, 0x320 },
+ { 0x120008, 0xa7 },
+ { 0x220008, 0x19 },
+ { 0x20088, 0x9 },
+ { 0x200b2, 0x104 },
+ { 0x10043, 0x5a1 },
+ { 0x10143, 0x5a1 },
+ { 0x11043, 0x5a1 },
+ { 0x11143, 0x5a1 },
+ { 0x12043, 0x5a1 },
+ { 0x12143, 0x5a1 },
+ { 0x13043, 0x5a1 },
+ { 0x13143, 0x5a1 },
+ { 0x1200b2, 0x104 },
+ { 0x110043, 0x5a1 },
+ { 0x110143, 0x5a1 },
+ { 0x111043, 0x5a1 },
+ { 0x111143, 0x5a1 },
+ { 0x112043, 0x5a1 },
+ { 0x112143, 0x5a1 },
+ { 0x113043, 0x5a1 },
+ { 0x113143, 0x5a1 },
+ { 0x2200b2, 0x104 },
+ { 0x210043, 0x5a1 },
+ { 0x210143, 0x5a1 },
+ { 0x211043, 0x5a1 },
+ { 0x211143, 0x5a1 },
+ { 0x212043, 0x5a1 },
+ { 0x212143, 0x5a1 },
+ { 0x213043, 0x5a1 },
+ { 0x213143, 0x5a1 },
+ { 0x200fa, 0x1 },
+ { 0x1200fa, 0x1 },
+ { 0x2200fa, 0x1 },
+ { 0x20019, 0x1 },
+ { 0x120019, 0x1 },
+ { 0x220019, 0x1 },
+ { 0x200f0, 0x600 },
+ { 0x200f1, 0x0 },
+ { 0x200f2, 0x4444 },
+ { 0x200f3, 0x8888 },
+ { 0x200f4, 0x5655 },
+ { 0x200f5, 0x0 },
+ { 0x200f6, 0x0 },
+ { 0x200f7, 0xf000 },
+ { 0x20025, 0x0 },
+ { 0x2002d, 0x0 },
+ { 0x12002d, 0x0 },
+ { 0x22002d, 0x0 },
+};
+
+/* P0 message block paremeter for training firmware */
+static struct dram_cfg_param lpddr4_fsp0_cfg[] = {
+ { 0xd0000, 0x0 },
+ { 0x54000, 0x0 },
+ { 0x54001, 0x0 },
+ { 0x54002, 0x0 },
+ { 0x54003, 0xc80 },
+ { 0x54004, 0x2 },
+ { 0x54005, ((LPDDR4_PHY_RON << 8) | LPDDR4_PHY_RTT) },
+ { 0x54006, LPDDR4_PHY_VREF_VALUE },
+ { 0x54007, 0x0 },
+ { 0x54008, 0x131f },
+ { 0x54009, LPDDR4_HDT_CTL_3200_1D },
+ { 0x5400a, 0x0 },
+ { 0x5400b, 0x2 },
+ { 0x5400c, 0x0 },
+ { 0x5400d, (LPDDR4_CATRAIN_3200_1d << 8) },
+ { 0x5400e, 0x0 },
+ { 0x5400f, 0x0 },
+ { 0x54010, 0x0 },
+ { 0x54011, 0x0 },
+ { 0x54012, 0x310 },
+ { 0x54013, 0x0 },
+ { 0x54014, 0x0 },
+ { 0x54015, 0x0 },
+ { 0x54016, 0x0 },
+ { 0x54017, 0x0 },
+ { 0x54018, 0x0 },
+ { 0x54019, 0x2dd4 },
+ { 0x5401a, (((LPDDR4_RON) << 3) | 0x3) },
+ { 0x5401b, ((LPDDR4_VREF_VALUE_CA << 8) |
+ (LPDDR4_RTT_CA_BANK0 << 4) | LPDDR4_RTT_DQ) },
+ { 0x5401c, ((LPDDR4_VREF_VALUE_DQ_RANK0 << 8) | 0x08) },
+ { 0x5401d, 0x0 },
+ { 0x5401e, LPDDR4_MR22_RANK0 },
+ { 0x5401f, 0x2dd4 },
+ { 0x54020, (((LPDDR4_RON) << 3) | 0x3) },
+ { 0x54021, ((LPDDR4_VREF_VALUE_CA << 8) |
+ (LPDDR4_RTT_CA_BANK1 << 4) | LPDDR4_RTT_DQ) },
+ { 0x54022, ((LPDDR4_VREF_VALUE_DQ_RANK1 << 8) | 0x08) },
+ { 0x54023, 0x0 },
+ { 0x54024, LPDDR4_MR22_RANK1 },
+ { 0x54025, 0x0 },
+ { 0x54026, 0x0 },
+ { 0x54027, 0x0 },
+ { 0x54028, 0x0 },
+ { 0x54029, 0x0 },
+ { 0x5402a, 0x0 },
+ { 0x5402b, 0x1000 },
+ { 0x5402c, 0x3 },
+ { 0x5402d, 0x0 },
+ { 0x5402e, 0x0 },
+ { 0x5402f, 0x0 },
+ { 0x54030, 0x0 },
+ { 0x54031, 0x0 },
+ { 0x54032, 0xd400 },
+ { 0x54033, ((((LPDDR4_RON) << 3) | 0x3) << 8) | 0x2d },
+ { 0x54034, (((LPDDR4_RTT_CA_BANK0 << 4) | LPDDR4_RTT_DQ) << 8) },
+ { 0x54035, (0x0800 | LPDDR4_VREF_VALUE_CA) },
+ { 0x54036, LPDDR4_VREF_VALUE_DQ_RANK0 },
+ { 0x54037, (LPDDR4_MR22_RANK0 << 8) },
+ { 0x54038, 0xd400 },
+ { 0x54039, ((((LPDDR4_RON) << 3) | 0x3) << 8) | 0x2d },
+ { 0x5403a, (((LPDDR4_RTT_CA_BANK1 << 4) | LPDDR4_RTT_DQ) << 8) },
+ { 0x5403b, (0x0800 | LPDDR4_VREF_VALUE_CA) },
+ { 0x5403c, LPDDR4_VREF_VALUE_DQ_RANK1 },
+ { 0x5403d, (LPDDR4_MR22_RANK1 << 8) },
+ { 0x5403d, (LPDDR4_MR22_RANK1 << 8) },
+ { 0x5403e, 0x0 },
+ { 0x5403f, 0x0 },
+ { 0x54040, 0x0 },
+ { 0x54041, 0x0 },
+ { 0x54042, 0x0 },
+ { 0x54043, 0x0 },
+ { 0x54044, 0x0 },
+ { 0xd0000, 0x1 },
+};
+
+/* P1 message block paremeter for training firmware */
+static struct dram_cfg_param lpddr4_fsp1_cfg[] = {
+ { 0xd0000, 0x0 },
+ { 0x54000, 0x0 },
+ { 0x54001, 0x0 },
+ { 0x54002, 0x1 },
+ { 0x54003, 0x29c },
+ { 0x54004, 0x2 },
+ { 0x54005, ((LPDDR4_PHY_RON << 8) | LPDDR4_PHY_RTT) },
+ { 0x54006, LPDDR4_PHY_VREF_VALUE },
+ { 0x54007, 0x0 },
+ { 0x54008, 0x121f },
+ { 0x54009, 0xc8 },
+ { 0x5400a, 0x0 },
+ { 0x5400b, 0x2 },
+ { 0x5400c, 0x0 },
+ { 0x5400d, 0x0 },
+ { 0x5400e, 0x0 },
+ { 0x5400f, 0x0 },
+ { 0x54010, 0x0 },
+ { 0x54011, 0x0 },
+ { 0x54012, 0x310 },
+ { 0x54013, 0x0 },
+ { 0x54014, 0x0 },
+ { 0x54015, 0x0 },
+ { 0x54016, 0x0 },
+ { 0x54017, 0x0 },
+ { 0x54018, 0x0 },
+ { 0x54019, 0x914 },
+ { 0x5401a, (((LPDDR4_RON) << 3) | 0x1) },
+ { 0x5401b, ((LPDDR4_VREF_VALUE_CA << 8) |
+ (LPDDR4_RTT_CA_BANK0 << 4) | LPDDR4_RTT_DQ) },
+ { 0x5401c, ((LPDDR4_VREF_VALUE_DQ_RANK0 << 8) | 0x08) },
+ { 0x5401e, 0x6 },
+ { 0x5401f, 0x914 },
+ { 0x54020, (((LPDDR4_RON) << 3) | 0x1) },
+ { 0x54021, ((LPDDR4_VREF_VALUE_CA << 8) |
+ (LPDDR4_RTT_CA_BANK1 << 4) | LPDDR4_RTT_DQ) },
+ { 0x54022, ((LPDDR4_VREF_VALUE_DQ_RANK1 << 8) | 0x08) },
+ { 0x54023, 0x0 },
+ { 0x54024, LPDDR4_MR22_RANK1 },
+ { 0x54025, 0x0 },
+ { 0x54026, 0x0 },
+ { 0x54027, 0x0 },
+ { 0x54028, 0x0 },
+ { 0x54029, 0x0 },
+ { 0x5402a, 0x0 },
+ { 0x5402b, 0x1000 },
+ { 0x5402c, 0x3 },
+ { 0x5402d, 0x0 },
+ { 0x5402e, 0x0 },
+ { 0x5402f, 0x0 },
+ { 0x54030, 0x0 },
+ { 0x54031, 0x0 },
+ { 0x54032, 0x1400 },
+ { 0x54033, ((((LPDDR4_RON) << 3) | 0x1) << 8) | 0x09 },
+ { 0x54034, (((LPDDR4_RTT_CA_BANK0 << 4) | LPDDR4_RTT_DQ) << 8) },
+ { 0x54035, (0x0800 | LPDDR4_VREF_VALUE_CA) },
+ { 0x54036, LPDDR4_VREF_VALUE_DQ_RANK0 },
+ { 0x54037, 0x600 },
+ { 0x54038, 0x1400 },
+ { 0x54039, ((((LPDDR4_RON) << 3) | 0x1) << 8) | 0x09 },
+ { 0x5403a, (((LPDDR4_RTT_CA_BANK1 << 4) | LPDDR4_RTT_DQ) << 8) },
+ { 0x5403b, (0x0800 | LPDDR4_VREF_VALUE_CA) },
+ { 0x5403c, LPDDR4_VREF_VALUE_DQ_RANK1 },
+ { 0x5403d, (LPDDR4_MR22_RANK1 << 8) },
+ { 0x5403e, 0x0 },
+ { 0x5403f, 0x0 },
+ { 0x54040, 0x0 },
+ { 0x54041, 0x0 },
+ { 0x54042, 0x0 },
+ { 0x54043, 0x0 },
+ { 0xd0000, 0x1 },
+
+};
+
+/* P0 2D message block paremeter for training firmware */
+static struct dram_cfg_param lpddr4_fsp0_2d_cfg[] = {
+ { 0xd0000, 0x0 },
+ { 0x54000, 0x0 },
+ { 0x54001, 0x0 },
+ { 0x54002, 0x0 },
+ { 0x54003, 0xc80 },
+ { 0x54004, 0x2 },
+ { 0x54005, ((LPDDR4_PHY_RON << 8) | LPDDR4_PHY_RTT) },
+ { 0x54006, LPDDR4_PHY_VREF_VALUE },
+ { 0x54007, 0x0 },
+ { 0x54008, 0x61 },
+ { 0x54009, LPDDR4_HDT_CTL_2D },
+ { 0x5400a, 0x0 },
+ { 0x5400b, 0x2 },
+ { 0x5400c, 0x0 },
+ { 0x5400d, (LPDDR4_CATRAIN_3200_2d << 8) },
+ { 0x5400e, 0x0 },
+ { 0x5400f, (LPDDR4_2D_SHARE << 8) | 0x00 },
+ { 0x54010, LPDDR4_2D_WEIGHT },
+ { 0x54011, 0x0 },
+ { 0x54012, 0x310 },
+ { 0x54013, 0x0 },
+ { 0x54014, 0x0 },
+ { 0x54015, 0x0 },
+ { 0x54016, 0x0 },
+ { 0x54017, 0x0 },
+ { 0x54018, 0x0 },
+ { 0x54024, 0x5 },
+ { 0x54019, 0x2dd4 },
+ { 0x5401a, (((LPDDR4_RON) << 3) | 0x3) },
+ { 0x5401b, ((LPDDR4_VREF_VALUE_CA << 8) |
+ (LPDDR4_RTT_CA_BANK0 << 4) | LPDDR4_RTT_DQ) },
+ { 0x5401c, ((LPDDR4_VREF_VALUE_DQ_RANK0 << 8) | 0x08) },
+ { 0x5401d, 0x0 },
+ { 0x5401e, LPDDR4_MR22_RANK0 },
+ { 0x5401f, 0x2dd4 },
+ { 0x54020, (((LPDDR4_RON) << 3) | 0x3) },
+ { 0x54021, ((LPDDR4_VREF_VALUE_CA << 8) |
+ (LPDDR4_RTT_CA_BANK1 << 4) | LPDDR4_RTT_DQ) },
+ { 0x54022, ((LPDDR4_VREF_VALUE_DQ_RANK1 << 8) | 0x08) },
+ { 0x54023, 0x0 },
+ { 0x54024, LPDDR4_MR22_RANK1 },
+ { 0x54025, 0x0 },
+ { 0x54026, 0x0 },
+ { 0x54027, 0x0 },
+ { 0x54028, 0x0 },
+ { 0x54029, 0x0 },
+ { 0x5402a, 0x0 },
+ { 0x5402b, 0x1000 },
+ { 0x5402c, 0x3 },
+ { 0x5402d, 0x0 },
+ { 0x5402e, 0x0 },
+ { 0x5402f, 0x0 },
+ { 0x54030, 0x0 },
+ { 0x54031, 0x0 },
+ { 0x54032, 0xd400 },
+ { 0x54033, ((((LPDDR4_RON) << 3) | 0x3) << 8) | 0x2d },
+ { 0x54034, (((LPDDR4_RTT_CA_BANK0 << 4) | LPDDR4_RTT_DQ) << 8) },
+ { 0x54035, (0x0800 | LPDDR4_VREF_VALUE_CA) },
+ { 0x54036, LPDDR4_VREF_VALUE_DQ_RANK0 },
+ { 0x54037, (LPDDR4_MR22_RANK0 << 8) },
+ { 0x54038, 0xd400 },
+ { 0x54039, ((((LPDDR4_RON) << 3) | 0x3) << 8) | 0x2d },
+ { 0x5403a, (((LPDDR4_RTT_CA_BANK1 << 4) | LPDDR4_RTT_DQ) << 8) },
+ { 0x5403b, (0x0800 | LPDDR4_VREF_VALUE_CA) },
+ { 0x5403c, LPDDR4_VREF_VALUE_DQ_RANK1 },
+ { 0x5403d, (LPDDR4_MR22_RANK1 << 8) },
+ { 0x5403e, 0x0 },
+ { 0x5403f, 0x0 },
+ { 0x54040, 0x0 },
+ { 0x54041, 0x0 },
+ { 0x54042, 0x0 },
+ { 0x54043, 0x0 },
+ { 0x54044, 0x0 },
+ { 0xd0000, 0x1 },
+
+};
+
+/* DRAM PHY init engine image */
+static struct dram_cfg_param lpddr4_phy_pie[] = {
+ { 0xd0000, 0x0 },
+ { 0x90000, 0x10 },
+ { 0x90001, 0x400 },
+ { 0x90002, 0x10e },
+ { 0x90003, 0x0 },
+ { 0x90004, 0x0 },
+ { 0x90005, 0x8 },
+ { 0x90029, 0xb },
+ { 0x9002a, 0x480 },
+ { 0x9002b, 0x109 },
+ { 0x9002c, 0x8 },
+ { 0x9002d, 0x448 },
+ { 0x9002e, 0x139 },
+ { 0x9002f, 0x8 },
+ { 0x90030, 0x478 },
+ { 0x90031, 0x109 },
+ { 0x90032, 0x0 },
+ { 0x90033, 0xe8 },
+ { 0x90034, 0x109 },
+ { 0x90035, 0x2 },
+ { 0x90036, 0x10 },
+ { 0x90037, 0x139 },
+ { 0x90038, 0xb },
+ { 0x90039, 0x7c0 },
+ { 0x9003a, 0x139 },
+ { 0x9003b, 0x44 },
+ { 0x9003c, 0x630 },
+ { 0x9003d, 0x159 },
+ { 0x9003e, 0x14f },
+ { 0x9003f, 0x630 },
+ { 0x90040, 0x159 },
+ { 0x90041, 0x47 },
+ { 0x90042, 0x630 },
+ { 0x90043, 0x149 },
+ { 0x90044, 0x4f },
+ { 0x90045, 0x630 },
+ { 0x90046, 0x179 },
+ { 0x90047, 0x8 },
+ { 0x90048, 0xe0 },
+ { 0x90049, 0x109 },
+ { 0x9004a, 0x0 },
+ { 0x9004b, 0x7c8 },
+ { 0x9004c, 0x109 },
+ { 0x9004d, 0x0 },
+ { 0x9004e, 0x1 },
+ { 0x9004f, 0x8 },
+ { 0x90050, 0x0 },
+ { 0x90051, 0x45a },
+ { 0x90052, 0x9 },
+ { 0x90053, 0x0 },
+ { 0x90054, 0x448 },
+ { 0x90055, 0x109 },
+ { 0x90056, 0x40 },
+ { 0x90057, 0x630 },
+ { 0x90058, 0x179 },
+ { 0x90059, 0x1 },
+ { 0x9005a, 0x618 },
+ { 0x9005b, 0x109 },
+ { 0x9005c, 0x40c0 },
+ { 0x9005d, 0x630 },
+ { 0x9005e, 0x149 },
+ { 0x9005f, 0x8 },
+ { 0x90060, 0x4 },
+ { 0x90061, 0x48 },
+ { 0x90062, 0x4040 },
+ { 0x90063, 0x630 },
+ { 0x90064, 0x149 },
+ { 0x90065, 0x0 },
+ { 0x90066, 0x4 },
+ { 0x90067, 0x48 },
+ { 0x90068, 0x40 },
+ { 0x90069, 0x630 },
+ { 0x9006a, 0x149 },
+ { 0x9006b, 0x10 },
+ { 0x9006c, 0x4 },
+ { 0x9006d, 0x18 },
+ { 0x9006e, 0x0 },
+ { 0x9006f, 0x4 },
+ { 0x90070, 0x78 },
+ { 0x90071, 0x549 },
+ { 0x90072, 0x630 },
+ { 0x90073, 0x159 },
+ { 0x90074, 0xd49 },
+ { 0x90075, 0x630 },
+ { 0x90076, 0x159 },
+ { 0x90077, 0x94a },
+ { 0x90078, 0x630 },
+ { 0x90079, 0x159 },
+ { 0x9007a, 0x441 },
+ { 0x9007b, 0x630 },
+ { 0x9007c, 0x149 },
+ { 0x9007d, 0x42 },
+ { 0x9007e, 0x630 },
+ { 0x9007f, 0x149 },
+ { 0x90080, 0x1 },
+ { 0x90081, 0x630 },
+ { 0x90082, 0x149 },
+ { 0x90083, 0x0 },
+ { 0x90084, 0xe0 },
+ { 0x90085, 0x109 },
+ { 0x90086, 0xa },
+ { 0x90087, 0x10 },
+ { 0x90088, 0x109 },
+ { 0x90089, 0x9 },
+ { 0x9008a, 0x3c0 },
+ { 0x9008b, 0x149 },
+ { 0x9008c, 0x9 },
+ { 0x9008d, 0x3c0 },
+ { 0x9008e, 0x159 },
+ { 0x9008f, 0x18 },
+ { 0x90090, 0x10 },
+ { 0x90091, 0x109 },
+ { 0x90092, 0x0 },
+ { 0x90093, 0x3c0 },
+ { 0x90094, 0x109 },
+ { 0x90095, 0x18 },
+ { 0x90096, 0x4 },
+ { 0x90097, 0x48 },
+ { 0x90098, 0x18 },
+ { 0x90099, 0x4 },
+ { 0x9009a, 0x58 },
+ { 0x9009b, 0xa },
+ { 0x9009c, 0x10 },
+ { 0x9009d, 0x109 },
+ { 0x9009e, 0x2 },
+ { 0x9009f, 0x10 },
+ { 0x900a0, 0x109 },
+ { 0x900a1, 0x5 },
+ { 0x900a2, 0x7c0 },
+ { 0x900a3, 0x109 },
+ { 0x900a4, 0xd },
+ { 0x900a5, 0x7c0 },
+ { 0x900a6, 0x109 },
+ { 0x900a7, 0x4 },
+ { 0x900a8, 0x7c0 },
+ { 0x900a9, 0x109 },
+ { 0x40000, 0x811 },
+ { 0x40020, 0x880 },
+ { 0x40040, 0x0 },
+ { 0x40060, 0x0 },
+ { 0x40001, 0x4008 },
+ { 0x40021, 0x83 },
+ { 0x40041, 0x4f },
+ { 0x40061, 0x0 },
+ { 0x40002, 0x4040 },
+ { 0x40022, 0x83 },
+ { 0x40042, 0x51 },
+ { 0x40062, 0x0 },
+ { 0x40003, 0x811 },
+ { 0x40023, 0x880 },
+ { 0x40043, 0x0 },
+ { 0x40063, 0x0 },
+ { 0x40004, 0x720 },
+ { 0x40024, 0xf },
+ { 0x40044, 0x1740 },
+ { 0x40064, 0x0 },
+ { 0x40005, 0x16 },
+ { 0x40025, 0x83 },
+ { 0x40045, 0x4b },
+ { 0x40065, 0x0 },
+ { 0x40006, 0x716 },
+ { 0x40026, 0xf },
+ { 0x40046, 0x2001 },
+ { 0x40066, 0x0 },
+ { 0x40007, 0x716 },
+ { 0x40027, 0xf },
+ { 0x40047, 0x2800 },
+ { 0x40067, 0x0 },
+ { 0x40008, 0x716 },
+ { 0x40028, 0xf },
+ { 0x40048, 0xf00 },
+ { 0x40068, 0x0 },
+ { 0x40009, 0x720 },
+ { 0x40029, 0xf },
+ { 0x40049, 0x1400 },
+ { 0x40069, 0x0 },
+ { 0x4000a, 0xe08 },
+ { 0x4002a, 0xc15 },
+ { 0x4004a, 0x0 },
+ { 0x4006a, 0x0 },
+ { 0x4000b, 0x623 },
+ { 0x4002b, 0x15 },
+ { 0x4004b, 0x0 },
+ { 0x4006b, 0x0 },
+ { 0x4000c, 0x4028 },
+ { 0x4002c, 0x80 },
+ { 0x4004c, 0x0 },
+ { 0x4006c, 0x0 },
+ { 0x4000d, 0xe08 },
+ { 0x4002d, 0xc1a },
+ { 0x4004d, 0x0 },
+ { 0x4006d, 0x0 },
+ { 0x4000e, 0x623 },
+ { 0x4002e, 0x1a },
+ { 0x4004e, 0x0 },
+ { 0x4006e, 0x0 },
+ { 0x4000f, 0x4040 },
+ { 0x4002f, 0x80 },
+ { 0x4004f, 0x0 },
+ { 0x4006f, 0x0 },
+ { 0x40010, 0x2604 },
+ { 0x40030, 0x15 },
+ { 0x40050, 0x0 },
+ { 0x40070, 0x0 },
+ { 0x40011, 0x708 },
+ { 0x40031, 0x5 },
+ { 0x40051, 0x0 },
+ { 0x40071, 0x2002 },
+ { 0x40012, 0x8 },
+ { 0x40032, 0x80 },
+ { 0x40052, 0x0 },
+ { 0x40072, 0x0 },
+ { 0x40013, 0x2604 },
+ { 0x40033, 0x1a },
+ { 0x40053, 0x0 },
+ { 0x40073, 0x0 },
+ { 0x40014, 0x708 },
+ { 0x40034, 0xa },
+ { 0x40054, 0x0 },
+ { 0x40074, 0x2002 },
+ { 0x40015, 0x4040 },
+ { 0x40035, 0x80 },
+ { 0x40055, 0x0 },
+ { 0x40075, 0x0 },
+ { 0x40016, 0x60a },
+ { 0x40036, 0x15 },
+ { 0x40056, 0x1200 },
+ { 0x40076, 0x0 },
+ { 0x40017, 0x61a },
+ { 0x40037, 0x15 },
+ { 0x40057, 0x1300 },
+ { 0x40077, 0x0 },
+ { 0x40018, 0x60a },
+ { 0x40038, 0x1a },
+ { 0x40058, 0x1200 },
+ { 0x40078, 0x0 },
+ { 0x40019, 0x642 },
+ { 0x40039, 0x1a },
+ { 0x40059, 0x1300 },
+ { 0x40079, 0x0 },
+ { 0x4001a, 0x4808 },
+ { 0x4003a, 0x880 },
+ { 0x4005a, 0x0 },
+ { 0x4007a, 0x0 },
+ { 0x900aa, 0x0 },
+ { 0x900ab, 0x790 },
+ { 0x900ac, 0x11a },
+ { 0x900ad, 0x8 },
+ { 0x900ae, 0x7aa },
+ { 0x900af, 0x2a },
+ { 0x900b0, 0x10 },
+ { 0x900b1, 0x7b2 },
+ { 0x900b2, 0x2a },
+ { 0x900b3, 0x0 },
+ { 0x900b4, 0x7c8 },
+ { 0x900b5, 0x109 },
+ { 0x900b6, 0x10 },
+ { 0x900b7, 0x10 },
+ { 0x900b8, 0x109 },
+ { 0x900b9, 0x10 },
+ { 0x900ba, 0x2a8 },
+ { 0x900bb, 0x129 },
+ { 0x900bc, 0x8 },
+ { 0x900bd, 0x370 },
+ { 0x900be, 0x129 },
+ { 0x900bf, 0xa },
+ { 0x900c0, 0x3c8 },
+ { 0x900c1, 0x1a9 },
+ { 0x900c2, 0xc },
+ { 0x900c3, 0x408 },
+ { 0x900c4, 0x199 },
+ { 0x900c5, 0x14 },
+ { 0x900c6, 0x790 },
+ { 0x900c7, 0x11a },
+ { 0x900c8, 0x8 },
+ { 0x900c9, 0x4 },
+ { 0x900ca, 0x18 },
+ { 0x900cb, 0xe },
+ { 0x900cc, 0x408 },
+ { 0x900cd, 0x199 },
+ { 0x900ce, 0x8 },
+ { 0x900cf, 0x8568 },
+ { 0x900d0, 0x108 },
+ { 0x900d1, 0x18 },
+ { 0x900d2, 0x790 },
+ { 0x900d3, 0x16a },
+ { 0x900d4, 0x8 },
+ { 0x900d5, 0x1d8 },
+ { 0x900d6, 0x169 },
+ { 0x900d7, 0x10 },
+ { 0x900d8, 0x8558 },
+ { 0x900d9, 0x168 },
+ { 0x900da, 0x70 },
+ { 0x900db, 0x788 },
+ { 0x900dc, 0x16a },
+ { 0x900dd, 0x1ff8 },
+ { 0x900de, 0x85a8 },
+ { 0x900df, 0x1e8 },
+ { 0x900e0, 0x50 },
+ { 0x900e1, 0x798 },
+ { 0x900e2, 0x16a },
+ { 0x900e3, 0x60 },
+ { 0x900e4, 0x7a0 },
+ { 0x900e5, 0x16a },
+ { 0x900e6, 0x8 },
+ { 0x900e7, 0x8310 },
+ { 0x900e8, 0x168 },
+ { 0x900e9, 0x8 },
+ { 0x900ea, 0xa310 },
+ { 0x900eb, 0x168 },
+ { 0x900ec, 0xa },
+ { 0x900ed, 0x408 },
+ { 0x900ee, 0x169 },
+ { 0x900ef, 0x6e },
+ { 0x900f0, 0x0 },
+ { 0x900f1, 0x68 },
+ { 0x900f2, 0x0 },
+ { 0x900f3, 0x408 },
+ { 0x900f4, 0x169 },
+ { 0x900f5, 0x0 },
+ { 0x900f6, 0x8310 },
+ { 0x900f7, 0x168 },
+ { 0x900f8, 0x0 },
+ { 0x900f9, 0xa310 },
+ { 0x900fa, 0x168 },
+ { 0x900fb, 0x1ff8 },
+ { 0x900fc, 0x85a8 },
+ { 0x900fd, 0x1e8 },
+ { 0x900fe, 0x68 },
+ { 0x900ff, 0x798 },
+ { 0x90100, 0x16a },
+ { 0x90101, 0x78 },
+ { 0x90102, 0x7a0 },
+ { 0x90103, 0x16a },
+ { 0x90104, 0x68 },
+ { 0x90105, 0x790 },
+ { 0x90106, 0x16a },
+ { 0x90107, 0x8 },
+ { 0x90108, 0x8b10 },
+ { 0x90109, 0x168 },
+ { 0x9010a, 0x8 },
+ { 0x9010b, 0xab10 },
+ { 0x9010c, 0x168 },
+ { 0x9010d, 0xa },
+ { 0x9010e, 0x408 },
+ { 0x9010f, 0x169 },
+ { 0x90110, 0x58 },
+ { 0x90111, 0x0 },
+ { 0x90112, 0x68 },
+ { 0x90113, 0x0 },
+ { 0x90114, 0x408 },
+ { 0x90115, 0x169 },
+ { 0x90116, 0x0 },
+ { 0x90117, 0x8b10 },
+ { 0x90118, 0x168 },
+ { 0x90119, 0x0 },
+ { 0x9011a, 0xab10 },
+ { 0x9011b, 0x168 },
+ { 0x9011c, 0x0 },
+ { 0x9011d, 0x1d8 },
+ { 0x9011e, 0x169 },
+ { 0x9011f, 0x80 },
+ { 0x90120, 0x790 },
+ { 0x90121, 0x16a },
+ { 0x90122, 0x18 },
+ { 0x90123, 0x7aa },
+ { 0x90124, 0x6a },
+ { 0x90125, 0xa },
+ { 0x90126, 0x0 },
+ { 0x90127, 0x1e9 },
+ { 0x90128, 0x8 },
+ { 0x90129, 0x8080 },
+ { 0x9012a, 0x108 },
+ { 0x9012b, 0xf },
+ { 0x9012c, 0x408 },
+ { 0x9012d, 0x169 },
+ { 0x9012e, 0xc },
+ { 0x9012f, 0x0 },
+ { 0x90130, 0x68 },
+ { 0x90131, 0x9 },
+ { 0x90132, 0x0 },
+ { 0x90133, 0x1a9 },
+ { 0x90134, 0x0 },
+ { 0x90135, 0x408 },
+ { 0x90136, 0x169 },
+ { 0x90137, 0x0 },
+ { 0x90138, 0x8080 },
+ { 0x90139, 0x108 },
+ { 0x9013a, 0x8 },
+ { 0x9013b, 0x7aa },
+ { 0x9013c, 0x6a },
+ { 0x9013d, 0x0 },
+ { 0x9013e, 0x8568 },
+ { 0x9013f, 0x108 },
+ { 0x90140, 0xb7 },
+ { 0x90141, 0x790 },
+ { 0x90142, 0x16a },
+ { 0x90143, 0x1f },
+ { 0x90144, 0x0 },
+ { 0x90145, 0x68 },
+ { 0x90146, 0x8 },
+ { 0x90147, 0x8558 },
+ { 0x90148, 0x168 },
+ { 0x90149, 0xf },
+ { 0x9014a, 0x408 },
+ { 0x9014b, 0x169 },
+ { 0x9014c, 0xc },
+ { 0x9014d, 0x0 },
+ { 0x9014e, 0x68 },
+ { 0x9014f, 0x0 },
+ { 0x90150, 0x408 },
+ { 0x90151, 0x169 },
+ { 0x90152, 0x0 },
+ { 0x90153, 0x8558 },
+ { 0x90154, 0x168 },
+ { 0x90155, 0x8 },
+ { 0x90156, 0x3c8 },
+ { 0x90157, 0x1a9 },
+ { 0x90158, 0x3 },
+ { 0x90159, 0x370 },
+ { 0x9015a, 0x129 },
+ { 0x9015b, 0x20 },
+ { 0x9015c, 0x2aa },
+ { 0x9015d, 0x9 },
+ { 0x9015e, 0x0 },
+ { 0x9015f, 0x400 },
+ { 0x90160, 0x10e },
+ { 0x90161, 0x8 },
+ { 0x90162, 0xe8 },
+ { 0x90163, 0x109 },
+ { 0x90164, 0x0 },
+ { 0x90165, 0x8140 },
+ { 0x90166, 0x10c },
+ { 0x90167, 0x10 },
+ { 0x90168, 0x8138 },
+ { 0x90169, 0x10c },
+ { 0x9016a, 0x8 },
+ { 0x9016b, 0x7c8 },
+ { 0x9016c, 0x101 },
+ { 0x9016d, 0x8 },
+ { 0x9016e, 0x0 },
+ { 0x9016f, 0x8 },
+ { 0x90170, 0x8 },
+ { 0x90171, 0x448 },
+ { 0x90172, 0x109 },
+ { 0x90173, 0xf },
+ { 0x90174, 0x7c0 },
+ { 0x90175, 0x109 },
+ { 0x90176, 0x0 },
+ { 0x90177, 0xe8 },
+ { 0x90178, 0x109 },
+ { 0x90179, 0x47 },
+ { 0x9017a, 0x630 },
+ { 0x9017b, 0x109 },
+ { 0x9017c, 0x8 },
+ { 0x9017d, 0x618 },
+ { 0x9017e, 0x109 },
+ { 0x9017f, 0x8 },
+ { 0x90180, 0xe0 },
+ { 0x90181, 0x109 },
+ { 0x90182, 0x0 },
+ { 0x90183, 0x7c8 },
+ { 0x90184, 0x109 },
+ { 0x90185, 0x8 },
+ { 0x90186, 0x8140 },
+ { 0x90187, 0x10c },
+ { 0x90188, 0x0 },
+ { 0x90189, 0x1 },
+ { 0x9018a, 0x8 },
+ { 0x9018b, 0x8 },
+ { 0x9018c, 0x4 },
+ { 0x9018d, 0x8 },
+ { 0x9018e, 0x8 },
+ { 0x9018f, 0x7c8 },
+ { 0x90190, 0x101 },
+ { 0x90006, 0x0 },
+ { 0x90007, 0x0 },
+ { 0x90008, 0x8 },
+ { 0x90009, 0x0 },
+ { 0x9000a, 0x0 },
+ { 0x9000b, 0x0 },
+ { 0xd00e7, 0x400 },
+ { 0x90017, 0x0 },
+ { 0x9001f, 0x2b },
+ { 0x90026, 0x6c },
+ { 0x400d0, 0x0 },
+ { 0x400d1, 0x101 },
+ { 0x400d2, 0x105 },
+ { 0x400d3, 0x107 },
+ { 0x400d4, 0x10f },
+ { 0x400d5, 0x202 },
+ { 0x400d6, 0x20a },
+ { 0x400d7, 0x20b },
+ { 0x2003a, 0x2 },
+ { 0x2000b, 0x64 },
+ { 0x2000c, 0xc8 },
+ { 0x2000d, 0x7d0 },
+ { 0x2000e, 0x2c },
+ { 0x12000b, 0x14 },
+ { 0x12000c, 0x29 },
+ { 0x12000d, 0x1a1 },
+ { 0x12000e, 0x10 },
+ { 0x22000b, 0x3 },
+ { 0x22000c, 0x6 },
+ { 0x22000d, 0x3e },
+ { 0x22000e, 0x10 },
+ { 0x9000c, 0x0 },
+ { 0x9000d, 0x173 },
+ { 0x9000e, 0x60 },
+ { 0x9000f, 0x6110 },
+ { 0x90010, 0x2152 },
+ { 0x90011, 0xdfbd },
+ { 0x90012, 0x60 },
+ { 0x90013, 0x6152 },
+ { 0x20010, 0x5a },
+ { 0x20011, 0x3 },
+ { 0x40080, 0xe0 },
+ { 0x40081, 0x12 },
+ { 0x40082, 0xe0 },
+ { 0x40083, 0x12 },
+ { 0x40084, 0xe0 },
+ { 0x40085, 0x12 },
+ { 0x140080, 0xe0 },
+ { 0x140081, 0x12 },
+ { 0x140082, 0xe0 },
+ { 0x140083, 0x12 },
+ { 0x140084, 0xe0 },
+ { 0x140085, 0x12 },
+ { 0x240080, 0xe0 },
+ { 0x240081, 0x12 },
+ { 0x240082, 0xe0 },
+ { 0x240083, 0x12 },
+ { 0x240084, 0xe0 },
+ { 0x240085, 0x12 },
+ { 0x400fd, 0xf },
+ { 0x10011, 0x1 },
+ { 0x10012, 0x1 },
+ { 0x10013, 0x180 },
+ { 0x10018, 0x1 },
+ { 0x10002, 0x6209 },
+ { 0x100b2, 0x1 },
+ { 0x101b4, 0x1 },
+ { 0x102b4, 0x1 },
+ { 0x103b4, 0x1 },
+ { 0x104b4, 0x1 },
+ { 0x105b4, 0x1 },
+ { 0x106b4, 0x1 },
+ { 0x107b4, 0x1 },
+ { 0x108b4, 0x1 },
+ { 0x11011, 0x1 },
+ { 0x11012, 0x1 },
+ { 0x11013, 0x180 },
+ { 0x11018, 0x1 },
+ { 0x11002, 0x6209 },
+ { 0x110b2, 0x1 },
+ { 0x111b4, 0x1 },
+ { 0x112b4, 0x1 },
+ { 0x113b4, 0x1 },
+ { 0x114b4, 0x1 },
+ { 0x115b4, 0x1 },
+ { 0x116b4, 0x1 },
+ { 0x117b4, 0x1 },
+ { 0x118b4, 0x1 },
+ { 0x12011, 0x1 },
+ { 0x12012, 0x1 },
+ { 0x12013, 0x180 },
+ { 0x12018, 0x1 },
+ { 0x12002, 0x6209 },
+ { 0x120b2, 0x1 },
+ { 0x121b4, 0x1 },
+ { 0x122b4, 0x1 },
+ { 0x123b4, 0x1 },
+ { 0x124b4, 0x1 },
+ { 0x125b4, 0x1 },
+ { 0x126b4, 0x1 },
+ { 0x127b4, 0x1 },
+ { 0x128b4, 0x1 },
+ { 0x13011, 0x1 },
+ { 0x13012, 0x1 },
+ { 0x13013, 0x180 },
+ { 0x13018, 0x1 },
+ { 0x13002, 0x6209 },
+ { 0x130b2, 0x1 },
+ { 0x131b4, 0x1 },
+ { 0x132b4, 0x1 },
+ { 0x133b4, 0x1 },
+ { 0x134b4, 0x1 },
+ { 0x135b4, 0x1 },
+ { 0x136b4, 0x1 },
+ { 0x137b4, 0x1 },
+ { 0x138b4, 0x1 },
+ { 0x20089, 0x1 },
+ { 0x20088, 0x19 },
+ { 0xc0080, 0x2 },
+ { 0xd0000, 0x1 },
+};
+
+static struct dram_fsp_msg lpddr4_dram_fsp_msg[] = {
+ {
+ /* P0 3200mts 1D */
+ .drate = 3200,
+ .fw_type = FW_1D_IMAGE,
+ .fsp_cfg = lpddr4_fsp0_cfg,
+ .fsp_cfg_num = ARRAY_SIZE(lpddr4_fsp0_cfg),
+ },
+ {
+ /* P1 667mts 1D */
+ .drate = 667,
+ .fw_type = FW_1D_IMAGE,
+ .fsp_cfg = lpddr4_fsp1_cfg,
+ .fsp_cfg_num = ARRAY_SIZE(lpddr4_fsp1_cfg),
+ },
+ {
+ /* P0 3200mts 2D */
+ .drate = 3200,
+ .fw_type = FW_2D_IMAGE,
+ .fsp_cfg = lpddr4_fsp0_2d_cfg,
+ .fsp_cfg_num = ARRAY_SIZE(lpddr4_fsp0_2d_cfg),
+ },
+};
+
+/* lpddr4 timing config params on EVK board */
+struct dram_timing_info dram_timing_b0 = {
+ .ddrc_cfg = lpddr4_ddrc_cfg,
+ .ddrc_cfg_num = ARRAY_SIZE(lpddr4_ddrc_cfg),
+ .ddrphy_cfg = lpddr4_ddrphy_cfg,
+ .ddrphy_cfg_num = ARRAY_SIZE(lpddr4_ddrphy_cfg),
+ .fsp_msg = lpddr4_dram_fsp_msg,
+ .fsp_msg_num = ARRAY_SIZE(lpddr4_dram_fsp_msg),
+ .ddrphy_pie = lpddr4_phy_pie,
+ .ddrphy_pie_num = ARRAY_SIZE(lpddr4_phy_pie),
+ /*
+ * this table must be initialized if DDRPHY bypass mode is
+ * not used: all fsp drate > 666MTS.
+ */
+ .fsp_table = { 3200, 667, },
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <asm/arch/ddr.h>
+#include <asm/arch/imx8mq_pins.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/clock.h>
+#include <asm/mach-imx/iomux-v3.h>
+#include <asm/mach-imx/gpio.h>
+#include <asm/mach-imx/mxc_i2c.h>
+#include <fsl_esdhc.h>
+#include <mmc.h>
+#include <power/pmic.h>
+#include <power/pfuze100_pmic.h>
+#include <spl.h>
+#include "../common/pfuze.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern struct dram_timing_info dram_timing_b0;
+
+void spl_dram_init(void)
+{
+ /* ddr init */
+ if ((get_cpu_rev() & 0xfff) == CHIP_REV_2_1)
+ ddr_init(&dram_timing);
+ else
+ ddr_init(&dram_timing_b0);
+}
+
+#define I2C_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_HYS | PAD_CTL_PUE)
+#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
+struct i2c_pads_info i2c_pad_info1 = {
+ .scl = {
+ .i2c_mode = IMX8MQ_PAD_I2C1_SCL__I2C1_SCL | PC,
+ .gpio_mode = IMX8MQ_PAD_I2C1_SCL__GPIO5_IO14 | PC,
+ .gp = IMX_GPIO_NR(5, 14),
+ },
+ .sda = {
+ .i2c_mode = IMX8MQ_PAD_I2C1_SDA__I2C1_SDA | PC,
+ .gpio_mode = IMX8MQ_PAD_I2C1_SDA__GPIO5_IO15 | PC,
+ .gp = IMX_GPIO_NR(5, 15),
+ },
+};
+
+#define USDHC2_CD_GPIO IMX_GPIO_NR(2, 12)
+#define USDHC1_PWR_GPIO IMX_GPIO_NR(2, 10)
+#define USDHC2_PWR_GPIO IMX_GPIO_NR(2, 19)
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+ struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+ int ret = 0;
+
+ switch (cfg->esdhc_base) {
+ case USDHC1_BASE_ADDR:
+ ret = 1;
+ break;
+ case USDHC2_BASE_ADDR:
+ ret = !gpio_get_value(USDHC2_CD_GPIO);
+ return ret;
+ }
+
+ return 1;
+}
+
+#define USDHC_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_HYS | PAD_CTL_PUE | \
+ PAD_CTL_FSEL2)
+#define USDHC_GPIO_PAD_CTRL (PAD_CTL_PUE | PAD_CTL_DSE1)
+
+static iomux_v3_cfg_t const usdhc1_pads[] = {
+ IMX8MQ_PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ IMX8MQ_PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ IMX8MQ_PAD_SD1_DATA0__USDHC1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ IMX8MQ_PAD_SD1_DATA1__USDHC1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ IMX8MQ_PAD_SD1_DATA2__USDHC1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ IMX8MQ_PAD_SD1_DATA3__USDHC1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ IMX8MQ_PAD_SD1_DATA4__USDHC1_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ IMX8MQ_PAD_SD1_DATA5__USDHC1_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ IMX8MQ_PAD_SD1_DATA6__USDHC1_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ IMX8MQ_PAD_SD1_DATA7__USDHC1_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ IMX8MQ_PAD_SD1_RESET_B__GPIO2_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const usdhc2_pads[] = {
+ IMX8MQ_PAD_SD2_CLK__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), /* 0xd6 */
+ IMX8MQ_PAD_SD2_CMD__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), /* 0xd6 */
+ IMX8MQ_PAD_SD2_DATA0__USDHC2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), /* 0xd6 */
+ IMX8MQ_PAD_SD2_DATA1__USDHC2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), /* 0xd6 */
+ IMX8MQ_PAD_SD2_DATA2__USDHC2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), /* 0x16 */
+ IMX8MQ_PAD_SD2_DATA3__USDHC2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), /* 0xd6 */
+ IMX8MQ_PAD_SD2_CD_B__GPIO2_IO12 | MUX_PAD_CTRL(USDHC_GPIO_PAD_CTRL),
+ IMX8MQ_PAD_SD2_RESET_B__GPIO2_IO19 | MUX_PAD_CTRL(USDHC_GPIO_PAD_CTRL),
+};
+
+static struct fsl_esdhc_cfg usdhc_cfg[2] = {
+ {USDHC1_BASE_ADDR, 0, 8},
+ {USDHC2_BASE_ADDR, 0, 4},
+};
+
+int board_mmc_init(bd_t *bis)
+{
+ int i, ret;
+ /*
+ * According to the board_mmc_init() the following map is done:
+ * (U-Boot device node) (Physical Port)
+ * mmc0 USDHC1
+ * mmc1 USDHC2
+ */
+ for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
+ switch (i) {
+ case 0:
+ init_clk_usdhc(0);
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(USDHC1_CLK_ROOT);
+ imx_iomux_v3_setup_multiple_pads(usdhc1_pads,
+ ARRAY_SIZE(usdhc1_pads));
+ gpio_request(USDHC1_PWR_GPIO, "usdhc1_reset");
+ gpio_direction_output(USDHC1_PWR_GPIO, 0);
+ udelay(500);
+ gpio_direction_output(USDHC1_PWR_GPIO, 1);
+ break;
+ case 1:
+ init_clk_usdhc(1);
+ usdhc_cfg[1].sdhc_clk = mxc_get_clock(USDHC2_CLK_ROOT);
+ imx_iomux_v3_setup_multiple_pads(usdhc2_pads,
+ ARRAY_SIZE(usdhc2_pads));
+ gpio_request(USDHC2_PWR_GPIO, "usdhc2_reset");
+ gpio_direction_output(USDHC2_PWR_GPIO, 0);
+ udelay(500);
+ gpio_direction_output(USDHC2_PWR_GPIO, 1);
+ break;
+ default:
+ printf("Warning: you configured more USDHC controllers(%d) than supported by the board\n", i + 1);
+ return -EINVAL;
+ }
+
+ ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_POWER
+#define I2C_PMIC 0
+int power_init_board(void)
+{
+ struct pmic *p;
+ int ret;
+ unsigned int reg;
+
+ ret = power_pfuze100_init(I2C_PMIC);
+ if (ret)
+ return -ENODEV;
+
+ p = pmic_get("PFUZE100");
+ ret = pmic_probe(p);
+ if (ret)
+ return -ENODEV;
+
+ pmic_reg_read(p, PFUZE100_DEVICEID, ®);
+ printf("PMIC: PFUZE100 ID=0x%02x\n", reg);
+
+ pmic_reg_read(p, PFUZE100_SW3AVOL, ®);
+ if ((reg & 0x3f) != 0x18) {
+ reg &= ~0x3f;
+ reg |= 0x18;
+ pmic_reg_write(p, PFUZE100_SW3AVOL, reg);
+ }
+
+ ret = pfuze_mode_init(p, APS_PFM);
+ if (ret < 0)
+ return ret;
+
+ /* set SW3A standby mode to off */
+ pmic_reg_read(p, PFUZE100_SW3AMODE, ®);
+ reg &= ~0xf;
+ reg |= APS_OFF;
+ pmic_reg_write(p, PFUZE100_SW3AMODE, reg);
+
+ return 0;
+}
+#endif
+
+void spl_board_init(void)
+{
+ puts("Normal Boot\n");
+}
+
+#ifdef CONFIG_SPL_LOAD_FIT
+int board_fit_config_name_match(const char *name)
+{
+ /* Just empty function now - can't decide what to choose */
+ debug("%s: %s\n", __func__, name);
+
+ return 0;
+}
+#endif
+
+void board_init_f(ulong dummy)
+{
+ int ret;
+
+ /* Clear global data */
+ memset((void *)gd, 0, sizeof(gd_t));
+
+ arch_cpu_init();
+
+ init_uart_clk(0);
+
+ board_early_init_f();
+
+ timer_init();
+
+ preloader_console_init();
+
+ /* Clear the BSS. */
+ memset(__bss_start, 0, __bss_end - __bss_start);
+
+ ret = spl_init();
+ if (ret) {
+ debug("spl_init() failed: %d\n", ret);
+ hang();
+ }
+
+ enable_tzc380();
+
+ /* Adjust pmic voltage to 1.0V for 800M */
+ setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
+
+ power_init_board();
+
+ /* DDR initialization */
+ spl_dram_init();
+
+ board_init_r(NULL, 0);
+}
*/
#define __ASSEMBLY__
-#include <config.h>
/* Boot from SD, sector size 0x400 */
BOOT_FROM SD 0x400
config SYS_CONFIG_NAME
default "ge_bx50v3"
+source "board/ge/common/Kconfig"
+
endif
#include "../../../drivers/net/e1000.h"
DECLARE_GLOBAL_DATA_PTR;
-struct vpd_cache;
-
static int confidx = 3; /* Default to b850v3. */
static struct vpd_cache vpd;
-#ifndef CONFIG_SYS_I2C_EEPROM_ADDR
-# define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
-# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#endif
-
-#ifndef CONFIG_SYS_I2C_EEPROM_BUS
-#define CONFIG_SYS_I2C_EEPROM_BUS 4
-#endif
-
#define NC_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
PAD_CTL_HYS)
#define VPD_MAC_ADDRESS_LENGTH 6
struct vpd_cache {
+ bool is_read;
u8 product_id;
u8 has;
unsigned char mac1[VPD_MAC_ADDRESS_LENGTH];
/*
* Extracts MAC and product information from the VPD.
*/
-static int vpd_callback(void *userdata, u8 id, u8 version, u8 type,
+static int vpd_callback(struct vpd_cache *vpd, u8 id, u8 version, u8 type,
size_t size, u8 const *data)
{
- struct vpd_cache *vpd = (struct vpd_cache *)userdata;
-
if (id == VPD_BLOCK_HWID && version == 1 && type != VPD_TYPE_INVALID &&
size >= 1) {
vpd->product_id = data[0];
int fec_index = -1;
int i210_index = -1;
+ if (!vpd->is_read) {
+ printf("VPD wasn't read");
+ return;
+ }
+
switch (vpd->product_id) {
case VPD_PRODUCT_B450:
env_set("confidx", "1");
eth_env_set_enetaddr_by_index("eth", i210_index, vpd->mac2);
}
-static int read_vpd(uint eeprom_bus)
-{
- int res;
- int size = 1024;
- uint8_t *data;
- unsigned int current_i2c_bus = i2c_get_bus_num();
-
- res = i2c_set_bus_num(eeprom_bus);
- if (res < 0)
- return res;
-
- data = (uint8_t *)malloc(size);
- if (!data)
- return -ENOMEM;
-
- res = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0,
- CONFIG_SYS_I2C_EEPROM_ADDR_LEN, data, size);
-
- if (res == 0) {
- memset(&vpd, 0, sizeof(vpd));
- vpd_reader(size, data, &vpd, vpd_callback);
- }
-
- free(data);
-
- i2c_set_bus_num(current_i2c_bus);
- return res;
-}
-
int board_eth_init(bd_t *bis)
{
setup_iomux_enet();
setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info3);
- read_vpd(CONFIG_SYS_I2C_EEPROM_BUS);
-
- set_confidx(&vpd);
+ if (!read_vpd(&vpd, vpd_callback)) {
+ vpd.is_read = true;
+ set_confidx(&vpd);
+ }
gpio_direction_output(SUS_S3_OUT, 1);
gpio_direction_output(WIFI_EN, 1);
--- /dev/null
+config SYS_VPD_EEPROM_I2C_ADDR
+ hex "I2C address of the EEPROM device used for VPD"
+ help
+ VPD = Vital Product Data
+
+config SYS_VPD_EEPROM_I2C_BUS
+ int "I2C bus of the EEPROM device used for VPD."
+
+config SYS_VPD_EEPROM_SIZE
+ int "Size in bytes of the EEPROM device used for VPD"
+
+config SYS_VPD_EEPROM_I2C_ADDR_LEN
+ int "Number of bytes to use for VPD EEPROM address"
+ default 1
#include "vpd_reader.h"
+#include <i2c.h>
#include <linux/bch.h>
#include <stdlib.h>
static const u8 ECC_BLOCK_ID = 0xFF;
-int vpd_reader(size_t size, u8 *data, void *userdata,
- int (*fn)(void *userdata, u8 id, u8 version, u8 type,
- size_t size, u8 const *data))
+static int vpd_reader(size_t size, u8 *data, struct vpd_cache *userdata,
+ int (*fn)(struct vpd_cache *, u8 id, u8 version, u8 type,
+ size_t size, u8 const *data))
{
if (size < HEADER_BLOCK_LEN || !data || !fn)
return -EINVAL;
return ret;
}
}
+
+int read_vpd(struct vpd_cache *cache,
+ int (*process_block)(struct vpd_cache *, u8 id, u8 version,
+ u8 type, size_t size, u8 const *data))
+{
+ static const size_t size = CONFIG_SYS_VPD_EEPROM_SIZE;
+
+ int res;
+ u8 *data;
+ unsigned int current_i2c_bus = i2c_get_bus_num();
+
+ res = i2c_set_bus_num(CONFIG_SYS_VPD_EEPROM_I2C_BUS);
+ if (res < 0)
+ return res;
+
+ data = malloc(size);
+ if (!data)
+ return -ENOMEM;
+
+ res = i2c_read(CONFIG_SYS_VPD_EEPROM_I2C_ADDR, 0,
+ CONFIG_SYS_VPD_EEPROM_I2C_ADDR_LEN,
+ data, size);
+ if (res == 0)
+ res = vpd_reader(size, data, cache, process_block);
+
+ free(data);
+
+ i2c_set_bus_num(current_i2c_bus);
+ return res;
+}
#include "common.h"
+struct vpd_cache;
+
/*
- * Read VPD from given data, verify content, and call callback
- * for each vital product data block.
+ * Read VPD from given data, verify content, call callback for each vital
+ * product data block.
+ *
+ * cache: structure used by process block to store VPD information
+ * process_block: callback called for each VPD data block
*
* Returns Non-zero on error. Negative numbers encode errno.
*/
-int vpd_reader(size_t size, u8 *data, void *userdata,
- int (*fn)(void *userdata, u8 id, u8 version, u8 type,
- size_t size, u8 const *data));
+int read_vpd(struct vpd_cache *cache,
+ int (*process_block)(struct vpd_cache *,
+ u8 id, u8 version, u8 type,
+ size_t size, u8 const *data));
config SYS_CONFIG_NAME
default "mx53ppd"
+source "board/ge/common/Kconfig"
+
endif
DECLARE_GLOBAL_DATA_PTR;
-/* Index of I2C1, SEGMENT 1 (see CONFIG_SYS_I2C_BUSES). */
-#define VPD_EEPROM_BUS 2
-
-/* Address of 24C08 EEPROM. */
-#define VPD_EEPROM_ADDR 0x50
-#define VPD_EEPROM_ADDR_LEN 1
-
static u32 mx53_dram_size[2];
phys_size_t get_effective_memsize(void)
/*
* Extracts MAC and product information from the VPD.
*/
-static int vpd_callback(void *userdata, u8 id, u8 version, u8 type, size_t size,
- u8 const *data)
+static int vpd_callback(struct vpd_cache *userdata, u8 id, u8 version,
+ u8 type, size_t size, u8 const *data)
{
- struct vpd_cache *vpd = (struct vpd_cache *)userdata;
+ struct vpd_cache *vpd = userdata;
if (id == VPD_BLOCK_HWID && version == 1 && type != VPD_TYPE_INVALID &&
size >= 1) {
eth_env_set_enetaddr("ethaddr", vpd->mac1);
}
-static int read_vpd(uint eeprom_bus)
-{
- struct vpd_cache vpd;
- int res;
- int size = 1024;
- u8 *data;
- unsigned int current_i2c_bus = i2c_get_bus_num();
-
- res = i2c_set_bus_num(eeprom_bus);
- if (res < 0)
- return res;
-
- data = malloc(size);
- if (!data)
- return -ENOMEM;
-
- res = i2c_read(VPD_EEPROM_ADDR, 0, VPD_EEPROM_ADDR_LEN, data, size);
- if (res == 0) {
- memset(&vpd, 0, sizeof(vpd));
- vpd_reader(size, data, &vpd, vpd_callback);
- process_vpd(&vpd);
- }
-
- free(data);
-
- i2c_set_bus_num(current_i2c_bus);
- return res;
-}
-
int board_init(void)
{
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
int board_late_init(void)
{
int res;
+ struct vpd_cache vpd;
- read_vpd(VPD_EEPROM_BUS);
+ memset(&vpd, 0, sizeof(vpd));
+ res = read_vpd(&vpd, vpd_callback);
+ if (!res)
+ process_vpd(&vpd);
+ else
+ printf("Can't read VPD");
res = clock_1GHz();
if (res != 0)
power_failed |= axp_set_sw(IS_ENABLED(CONFIG_AXP_SW_ON));
#endif
#endif
+ printf("DRAM:");
+ gd->ram_size = sunxi_dram_init();
+ printf(" %d MiB\n", (int)(gd->ram_size >> 20));
+ if (!gd->ram_size)
+ hang();
+
+ sunxi_spl_store_dram_size(gd->ram_size);
/*
* Only clock up the CPU to full speed if we are reasonably
if (!power_failed)
clock_set_pll1(CONFIG_SYS_CLK_FREQ);
else
- printf("Error setting up the power controller.\n"
- "CPU frequency not set.\n");
-
- printf("DRAM:");
- gd->ram_size = sunxi_dram_init();
- printf(" %d MiB\n", (int)(gd->ram_size >> 20));
- if (!gd->ram_size)
- hang();
-
- sunxi_spl_store_dram_size(gd->ram_size);
+ printf("Failed to set core voltage! Can't set CPU frequency\n");
}
#endif
printf(" %8d", file_cbfs_size(file));
switch (type) {
+ case CBFS_TYPE_BOOTBLOCK:
+ type_name = "bootblock";
+ break;
+ case CBFS_TYPE_CBFSHEADER:
+ type_name = "cbfs header";
+ break;
case CBFS_TYPE_STAGE:
type_name = "stage";
break;
case CBFS_TYPE_PAYLOAD:
type_name = "payload";
break;
+ case CBFS_TYPE_FIT:
+ type_name = "fit";
+ break;
case CBFS_TYPE_OPTIONROM:
type_name = "option rom";
break;
case CBFS_TYPE_MICROCODE:
type_name = "microcode";
break;
- case CBFS_COMPONENT_CMOS_DEFAULT:
+ case CBFS_TYPE_FSP:
+ type_name = "fsp";
+ break;
+ case CBFS_TYPE_MRC:
+ type_name = "mrc";
+ break;
+ case CBFS_TYPE_MMA:
+ type_name = "mma";
+ break;
+ case CBFS_TYPE_EFI:
+ type_name = "efi";
+ break;
+ case CBFS_TYPE_STRUCT:
+ type_name = "struct";
+ break;
+ case CBFS_TYPE_CMOS_DEFAULT:
type_name = "cmos default";
break;
- case CBFS_COMPONENT_CMOS_LAYOUT:
+ case CBFS_TYPE_SPD:
+ type_name = "spd";
+ break;
+ case CBFS_TYPE_MRC_CACHE:
+ type_name = "mrc cache";
+ break;
+ case CBFS_TYPE_CMOS_LAYOUT:
type_name = "cmos layout";
break;
case -1:
#if defined(CONFIG_BOOTM_VXWORKS) && \
(defined(CONFIG_PPC) || defined(CONFIG_ARM))
-void do_bootvx_fdt(bootm_headers_t *images)
+static void do_bootvx_fdt(bootm_headers_t *images)
{
#if defined(CONFIG_OF_LIBFDT)
int ret;
puts("## vxWorks terminated\n");
}
-static int do_bootm_vxworks(int flag, int argc, char * const argv[],
- bootm_headers_t *images)
+int do_bootm_vxworks(int flag, int argc, char * const argv[],
+ bootm_headers_t *images)
{
if (flag != BOOTM_STATE_OS_GO)
return 0;
[IH_OS_PLAN9] = do_bootm_plan9,
#endif
#if defined(CONFIG_BOOTM_VXWORKS) && \
- (defined(CONFIG_PPC) || defined(CONFIG_ARM))
+ (defined(CONFIG_PPC) || defined(CONFIG_ARM) || defined(CONFIG_RISCV))
[IH_OS_VXWORKS] = do_bootm_vxworks,
#endif
#if defined(CONFIG_CMD_ELF)
{ IH_TYPE_KWBIMAGE, "kwbimage", "Kirkwood Boot Image",},
{ IH_TYPE_IMXIMAGE, "imximage", "Freescale i.MX Boot Image",},
{ IH_TYPE_IMX8IMAGE, "imx8image", "NXP i.MX8 Boot Image",},
+ { IH_TYPE_IMX8MIMAGE, "imx8mimage", "NXP i.MX8M Boot Image",},
{ IH_TYPE_INVALID, "invalid", "Invalid Image", },
{ IH_TYPE_MULTI, "multi", "Multi-File Image", },
{ IH_TYPE_OMAPIMAGE, "omapimage", "TI OMAP SPL With GP CH",},
bool "Remove functionality from SPL FIT loading to reduce size"
depends on SPL_FIT
default y if MACH_SUN50I || MACH_SUN50I_H5 || MACH_SUN50I_H6
+ default y if ARCH_IMX8M
help
Enable this to reduce the size of the FIT image loading code
in SPL, if space for the SPL binary is very tight.
#define CONFIG_SYS_BOOTM_LEN (64 << 20)
#endif
+__weak void board_spl_fit_post_load(ulong load_addr, size_t length)
+{
+}
+
+__weak ulong board_spl_fit_size_align(ulong size)
+{
+ return size;
+}
+
/**
* spl_fit_get_image_name(): By using the matching configuration subnode,
* retrieve the name of an image, specified by a property name and an index
*/
size = fdt_totalsize(fit);
size = (size + 3) & ~3;
+ size = board_spl_fit_size_align(size);
base_offset = (size + 3) & ~3;
/*
fit = spl_get_load_buffer(-hsize, hsize);
sectors = get_aligned_image_size(info, size, 0);
count = info->read(info, sector, sectors, fit);
- debug("fit read sector %lx, sectors=%d, dst=%p, count=%lu\n",
- sector, sectors, fit, count);
+ debug("fit read sector %lx, sectors=%d, dst=%p, count=%lu, size=0x%lx\n",
+ sector, sectors, fit, count, size);
+
if (count == 0)
return -EIO;
if (spl_image->entry_point == FDT_ERROR || spl_image->entry_point == 0)
spl_image->entry_point = spl_image->load_addr;
+ spl_image->flags |= SPL_FIT_FOUND;
+
+#ifdef CONFIG_SECURE_BOOT
+ board_spl_fit_post_load((ulong)fit, size);
+#endif
+
return 0;
}
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="imx7d-sdb"
# CONFIG_ENV_IS_IN_MMC is not set
CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_DM_MMC=y
CONFIG_FSL_ESDHC=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_SPI_FLASH_SST=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_MII=y
+CONFIG_DM_REGULATOR=y
CONFIG_SPI=y
CONFIG_MXC_SPI=y
CONFIG_USB=y
+CONFIG_DM_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_MXC_USB_OTG_HACTIVE=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_CI_UDC=y
-CONFIG_OF_LIBFDT=y
CONFIG_CMD_GPT=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PART=y
-# CONFIG_CMD_PCI is not set
# CONFIG_CMD_NFS is not set
CONFIG_CMD_TIMER=y
CONFIG_CMD_HASH=y
CONFIG_BOOTDELAY=1
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
+
+# monitor's EEPROM is connected to the bus through the mux channel 1
+# (the number is the offset in CONFIG_SYS_I2C_BUSES)
+CONFIG_SYS_VPD_EEPROM_I2C_BUS=4
+# Address of Atmel 24C08 EEPROM
+CONFIG_SYS_VPD_EEPROM_I2C_ADDR=0x50
+CONFIG_SYS_VPD_EEPROM_I2C_ADDR_LEN=1
+CONFIG_SYS_VPD_EEPROM_SIZE=1024
+
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_LAST_STAGE_INIT=y
--- /dev/null
+CONFIG_ARM=y
+CONFIG_ARCH_IMX8M=y
+CONFIG_SYS_TEXT_BASE=0x40200000
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_TARGET_IMX8MQ_EVK=y
+CONFIG_SAVED_DRAM_TIMING_BASE=0x40000000
+CONFIG_DEFAULT_DEVICE_TREE="fsl-imx8mq-evk"
+CONFIG_OF_LIST="fsl-imx8mq-evk"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/imx8m/imximage.cfg"
+CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
+CONFIG_FIT=y
+CONFIG_SPL_LOAD_FIT=y
+#CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
+CONFIG_SPL=y
+CONFIG_SPL_BOARD_INIT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_OF_CONTROL=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_DM_MMC=y
+CONFIG_DM_ETH=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX8M=y
+CONFIG_SYS_I2C_MXC=y
+CONFIG_DM_PMIC_PFUZE100=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_PFUZE100=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_DM_THERMAL=y
+CONFIG_FS_FAT=y
+CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_ARCH_MISC_INIT=y
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_HUSH_PARSER=y
+# CONFIG_CMD_BOOTEFI is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_MMC=y
CONFIG_LED_STATUS=y
CONFIG_LED_STATUS_GPIO=y
CONFIG_LED_STATUS0=y
-CONFIG_LED_STATUS_BIT=59
+CONFIG_LED_STATUS_BIT=778
CONFIG_LED_STATUS_STATE=2
CONFIG_LED_STATUS_BOOT_ENABLE=y
CONFIG_LED_STATUS_BOOT=0
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
+
+# monitor's EEPROM is connected to the bus through the mux channel 1
+# (the number is the offset in CONFIG_SYS_I2C_BUSES)
+# (there is also Frame EEPROM connected to the channel 4 (bus 4))
+CONFIG_SYS_VPD_EEPROM_I2C_BUS=2
+# Address of Atmel 24C08 EEPROM
+CONFIG_SYS_VPD_EEPROM_I2C_ADDR=0x50
+CONFIG_SYS_VPD_EEPROM_I2C_ADDR_LEN=1
+CONFIG_SYS_VPD_EEPROM_SIZE=1024
+
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_MISC_INIT_R=y
CONFIG_HUSH_PARSER=y
CONFIG_PINCTRL=y
CONFIG_SPL_PINCTRL=y
CONFIG_PINCTRL_ROCKCHIP_RK3399=y
+CONFIG_PINCTRL_ROCKCHIP_RK3399_FULL=y
CONFIG_DM_PMIC=y
CONFIG_DM_PMIC_FAN53555=y
CONFIG_PMIC_RK8XX=y
CONFIG_SPL_DM_REGULATOR=y
+CONFIG_REGULATOR_PWM=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_SPL_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
--- /dev/null
+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_SYS_TEXT_BASE=0x17800000
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_TARGET_EMBESTMX6BOARDS=y
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL=y
+CONFIG_SPL_LIBDISK_SUPPORT=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,SPL,MX6S,DDR_MB=1024"
+CONFIG_BOOTCOMMAND="run finduuid; run distro_bootcmd"
+# CONFIG_CONSOLE_MUX is not set
+CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_RAW_IMAGE_SUPPORT=y
+CONFIG_SPL_EXT_SUPPORT=y
+CONFIG_SPL_OS_BOOT=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_DM=y
+CONFIG_FSL_ESDHC=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_SST=y
+CONFIG_PHYLIB=y
+CONFIG_MII=y
+CONFIG_SPI=y
+CONFIG_MXC_SPI=y
+CONFIG_DM_THERMAL=y
+CONFIG_USB=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_VIDEO=y
+# CONFIG_VIDEO_SW_CURSOR is not set
+CONFIG_OF_LIBFDT=y
+CONFIG_SPL_OF_LIBFDT=y
CONFIG_MICRO_SUPPORT_CARD=y
CONFIG_NR_DRAM_BANKS=3
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
+CONFIG_BOOTCOMMAND="run ${bootdev}script; run ${bootdev}boot"
CONFIG_LOGLEVEL=6
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SPL_NOR_SUPPORT=y
CONFIG_MICRO_SUPPORT_CARD=y
CONFIG_NR_DRAM_BANKS=3
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
+CONFIG_BOOTCOMMAND="run ${bootdev}script; run ${bootdev}boot"
CONFIG_LOGLEVEL=6
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SPL_NOR_SUPPORT=y
CONFIG_MICRO_SUPPORT_CARD=y
CONFIG_NR_DRAM_BANKS=3
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
+CONFIG_BOOTCOMMAND="run ${bootdev}script; run ${bootdev}boot"
CONFIG_LOGLEVEL=6
CONFIG_CMD_CONFIG=y
CONFIG_CMD_IMLS=y
CONFIG_IMX_RDC=y
CONFIG_IMX_BOOTAUX=y
CONFIG_NR_DRAM_BANKS=1
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/warp7/imximage.cfg"
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_BOOTD is not set
--- /dev/null
+NXP i.MX (MXC) One wire bus master controller
+=======================
+
+Child nodes are required in device tree. The driver will detect
+the devices serial number and then search in the child nodes in the device tree
+for the proper node and try to match it with the device.
+
+Also check doc/device-tree-bindings/w1-eeprom for possible child nodes drivers
+
+Driver:
+- drivers/w1/mxc_w1.c
+
+Required properties:
+- compatible : should be one of
+ "fsl,imx21-owire", "fsl,imx27-owire", "fsl,imx31-owire", "fsl,imx25-owire"
+ "fsl,imx25-owire", "fsl,imx35-owire", "fsl,imx50-owire", "fsl,imx53-owire"
+
+- reg : Address and length of the register set for the device
+
+Optional:
+* none
+
+Example:
+ onewire {
+ compatible = "fsl,imx53-owire";
+ reg = <0x63fa4000 0x4000>;
+ };
+
+Example with child:
+ onewire {
+ compatible = "fsl,imx53-owire";
+ reg = <0x63fa4000 0x4000>;
+
+ eeprom1: eeprom@0 {
+ compatible = "maxim,ds24xxx";
+ };
+ };
Board Maintainers should submit the patches for enabling DM_SPI and DM_SPI_FLASH
to move the migration with in the deadline.
-Status: In progress
-Deadline: 2018.09
-
No dm conversion yet:
drivers/spi/cf_spi.c
drivers/spi/fsl_espi.c
drivers/spi/sh_spi.c
drivers/spi/soft_spi_legacy.c
+ Status: In progress
+ Deadline: 2019.04
+
Partially converted:
drivers/spi/atcspi200_spi.c
drivers/spi/davinci_spi.c
drivers/spi/omap3_spi.c
drivers/spi/ti_qspi.c
+ Status: In progress
+ Deadline: 2019.07
+
--
Jagan Teki <jagan@openedev.com>
+12/24/2018
03/14/2018
We have set 255 heads, 63 sector. We have to set the cylinder.
The value to be set can be calculated with:
- cilynder = <total size> / <heads> / <sectors> / <blocksize>
+ cylinder = <total size> / <heads> / <sectors> / <blocksize>
in this example,
1981284352 / 255 / 63 / 512 = 239.x = 239
TAG [LAST]
- LAST :: Flag denoting the last section in the file
- - After a "TAG" unstruction, any of the following instructions may follow
+ - After a "TAG" instruction, any of the following instructions may follow
in any order and any quantity:
NOOP
- An optional flags lines can be one of the following:
DISPLAYPROGRESS
- - Enable boot progress output form the BootROM.
+ - Enable boot progress output from the BootROM.
- If the boot progress output from the BootROM is enabled, the BootROM will
produce a letter on the Debug UART for each instruction it started processing.
obj-$(CONFIG_ARMADA_38X) += ddr/marvell/a38x/
obj-$(CONFIG_ARMADA_XP) += ddr/marvell/axp/
obj-$(CONFIG_ALTERA_SDRAM) += ddr/altera/
+obj-$(CONFIG_ARCH_IMX8M) += ddr/imx/imx8m/
obj-$(CONFIG_SPL_POWER_SUPPORT) += power/ power/pmic/
obj-$(CONFIG_SPL_POWER_SUPPORT) += power/regulator/
obj-$(CONFIG_SPL_POWER_DOMAIN) += power/domain/
#include "clk-uniphier.h"
-/* Denali driver requires clk_x rate (clk: 50MHz, clk_x & ecc_clk: 200MHz) */
#define UNIPHIER_LD4_SYS_CLK_NAND(_id) \
- UNIPHIER_CLK_RATE(128, 200000000), \
+ UNIPHIER_CLK_RATE(128, 50000000), \
UNIPHIER_CLK_GATE((_id), 128, 0x2104, 2)
#define UNIPHIER_LD11_SYS_CLK_NAND(_id) \
- UNIPHIER_CLK_RATE(128, 200000000), \
+ UNIPHIER_CLK_RATE(128, 50000000), \
UNIPHIER_CLK_GATE((_id), 128, 0x210c, 0)
const struct uniphier_clk_data uniphier_pxs2_sys_clk_data[] = {
defined(CONFIG_ARCH_UNIPHIER_PRO4) || defined(CONFIG_ARCH_UNIPHIER_PRO5) ||\
defined(CONFIG_ARCH_UNIPHIER_PXS2) || defined(CONFIG_ARCH_UNIPHIER_LD6B)
UNIPHIER_LD4_SYS_CLK_NAND(2),
+ UNIPHIER_CLK_RATE(3, 200000000),
UNIPHIER_CLK_GATE_SIMPLE(6, 0x2104, 12), /* ether (Pro4, PXs2) */
UNIPHIER_CLK_GATE_SIMPLE(7, 0x2104, 5), /* ether-gb (Pro4) */
UNIPHIER_CLK_GATE_SIMPLE(8, 0x2104, 10), /* stdmac */
const struct uniphier_clk_data uniphier_ld20_sys_clk_data[] = {
#if defined(CONFIG_ARCH_UNIPHIER_LD11) || defined(CONFIG_ARCH_UNIPHIER_LD20)
UNIPHIER_LD11_SYS_CLK_NAND(2),
+ UNIPHIER_CLK_RATE(3, 200000000),
UNIPHIER_CLK_GATE_SIMPLE(6, 0x210c, 6), /* ether */
UNIPHIER_CLK_GATE_SIMPLE(8, 0x210c, 8), /* stdmac */
UNIPHIER_CLK_GATE_SIMPLE(14, 0x210c, 14), /* usb30 (LD20) */
const struct uniphier_clk_data uniphier_pxs3_sys_clk_data[] = {
#if defined(CONFIG_ARCH_UNIPHIER_PXS3)
UNIPHIER_LD11_SYS_CLK_NAND(2),
+ UNIPHIER_CLK_RATE(3, 200000000),
UNIPHIER_CLK_GATE_SIMPLE(6, 0x210c, 9), /* ether0 */
UNIPHIER_CLK_GATE_SIMPLE(7, 0x210c, 10), /* ether1 */
UNIPHIER_CLK_GATE_SIMPLE(12, 0x210c, 4), /* usb30 (gio0) */
source "drivers/ddr/altera/Kconfig"
+source "drivers/ddr/imx/Kconfig"
--- /dev/null
+source "drivers/ddr/imx/imx8m/Kconfig"
--- /dev/null
+config IMX8M_DRAM
+ bool "imx8m dram"
+
+config IMX8M_LPDDR4
+ bool "imx8m lpddr4"
+ select IMX8M_DRAM
+ help
+ Select the i.MX8M LPDDR4 driver support on i.MX8M SOC.
+
+config IMX8M_DDR4
+ bool "imx8m ddr4"
+ select IMX8M_DRAM
+ help
+ Select the i.MX8M DDR4 driver support on i.MX8M SOC.
+
+config SAVED_DRAM_TIMING_BASE
+ hex "Define the base address for saved dram timing"
+ help
+ after DRAM is trained, need to save the dram related timming
+ info into memory for low power use. OCRAM_S is used for this
+ purpose on i.MX8MM.
+ default 0x180000
--- /dev/null
+#
+# Copyright 2018 NXP
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+ifdef CONFIG_SPL_BUILD
+obj-$(CONFIG_IMX8M_DRAM) += helper.o ddrphy_utils.o ddrphy_train.o ddrphy_csr.o
+obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_init.o
+obj-$(CONFIG_IMX8M_DDR4) += ddr4_init.o
+endif
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <asm/arch/ddr.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/imx8m_ddr.h>
+#include <asm/arch/sys_proto.h>
+
+void ddr4_cfg_umctl2(struct dram_cfg_param *ddrc_cfg, int num)
+{
+ int i = 0;
+
+ for (i = 0; i < num; i++) {
+ reg32_write(ddrc_cfg->reg, ddrc_cfg->val);
+ ddrc_cfg++;
+ }
+}
+
+void ddr_init(struct dram_timing_info *dram_timing)
+{
+ volatile unsigned int tmp_t;
+ /*
+ * assert [0]ddr1_preset_n, [1]ddr1_core_reset_n,
+ * [2]ddr1_phy_reset, [3]ddr1_phy_pwrokin_n,
+ * [4]src_system_rst_b!
+ */
+ reg32_write(SRC_DDRC_RCR_ADDR, 0x8F00003F);
+ /* deassert [4]src_system_rst_b! */
+ reg32_write(SRC_DDRC_RCR_ADDR, 0x8F00000F);
+
+ /*
+ * change the clock source of dram_apb_clk_root
+ * to source 4 --800MHz/4
+ */
+ clock_set_target_val(DRAM_APB_CLK_ROOT, CLK_ROOT_ON |
+ CLK_ROOT_SOURCE_SEL(4) |
+ CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV4));
+
+ dram_pll_init(DRAM_PLL_OUT_600M);
+
+ reg32_write(0x303A00EC, 0x0000ffff); /* PGC_CPU_MAPPING */
+ reg32setbit(0x303A00F8, 5); /* PU_PGC_SW_PUP_REQ */
+
+ /* release [0]ddr1_preset_n, [3]ddr1_phy_pwrokin_n */
+ reg32_write(SRC_DDRC_RCR_ADDR, 0x8F000006);
+
+ reg32_write(DDRC_DBG1(0), 0x00000001);
+ reg32_write(DDRC_PWRCTL(0), 0x00000001);
+
+ while (0 != (0x7 & reg32_read(DDRC_STAT(0))))
+ ;
+
+ /* config the uMCTL2's registers */
+ ddr4_cfg_umctl2(dram_timing->ddrc_cfg, dram_timing->ddrc_cfg_num);
+
+ reg32_write(DDRC_RFSHCTL3(0), 0x00000001);
+ /* RESET: <ctn> DEASSERTED */
+ /* RESET: <a Port 0 DEASSERTED(0) */
+ reg32_write(SRC_DDRC_RCR_ADDR, 0x8F000004);
+ reg32_write(SRC_DDRC_RCR_ADDR, 0x8F000000);
+
+ reg32_write(DDRC_DBG1(0), 0x00000000);
+ reg32_write(DDRC_PWRCTL(0), 0x00000aa);
+ reg32_write(DDRC_SWCTL(0), 0x00000000);
+
+ reg32_write(DDRC_DFIMISC(0), 0x00000000);
+
+ /* config the DDR PHY's registers */
+ ddr_cfg_phy(dram_timing);
+
+ do {
+ tmp_t = reg32_read(IP2APB_DDRPHY_IPS_BASE_ADDR(0) +
+ 4 * 0x00020097);
+ } while (tmp_t != 0);
+
+ reg32_write(DDRC_DFIMISC(0), 0x00000020);
+
+ /* wait DFISTAT.dfi_init_complete to 1 */
+ while (0 == (0x1 & reg32_read(DDRC_DFISTAT(0))))
+ ;
+
+ /* clear DFIMISC.dfi_init_complete_en */
+ reg32_write(DDRC_DFIMISC(0), 0x00000000);
+ /* set DFIMISC.dfi_init_complete_en again */
+ reg32_write(DDRC_DFIMISC(0), 0x00000001);
+ reg32_write(DDRC_PWRCTL(0), 0x0000088);
+
+ /*
+ * set SWCTL.sw_done to enable quasi-dynamic register
+ * programming outside reset.
+ */
+ reg32_write(DDRC_SWCTL(0), 0x00000001);
+ /* wait SWSTAT.sw_done_ack to 1 */
+ while (0 == (0x1 & reg32_read(DDRC_SWSTAT(0))))
+ ;
+
+ /* wait STAT to normal state */
+ while (0x1 != (0x7 & reg32_read(DDRC_STAT(0))))
+ ;
+
+ reg32_write(DDRC_PWRCTL(0), 0x0000088);
+ reg32_write(DDRC_PCTRL_0(0), 0x00000001);
+ /* dis_auto-refresh is set to 0 */
+ reg32_write(DDRC_RFSHCTL3(0), 0x00000000);
+
+ /* save the dram timing config into memory */
+ dram_config_save(dram_timing, CONFIG_SAVED_DRAM_TIMING_BASE);
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+#include <linux/kernel.h>
+#include <asm/arch/ddr.h>
+
+/* ddr phy trained csr */
+struct dram_cfg_param ddrphy_trained_csr[] = {
+ { 0x200b2, 0x0 },
+ { 0x1200b2, 0x0 },
+ { 0x2200b2, 0x0 },
+ { 0x200cb, 0x0 },
+ { 0x10043, 0x0 },
+ { 0x110043, 0x0 },
+ { 0x210043, 0x0 },
+ { 0x10143, 0x0 },
+ { 0x110143, 0x0 },
+ { 0x210143, 0x0 },
+ { 0x11043, 0x0 },
+ { 0x111043, 0x0 },
+ { 0x211043, 0x0 },
+ { 0x11143, 0x0 },
+ { 0x111143, 0x0 },
+ { 0x211143, 0x0 },
+ { 0x12043, 0x0 },
+ { 0x112043, 0x0 },
+ { 0x212043, 0x0 },
+ { 0x12143, 0x0 },
+ { 0x112143, 0x0 },
+ { 0x212143, 0x0 },
+ { 0x13043, 0x0 },
+ { 0x113043, 0x0 },
+ { 0x213043, 0x0 },
+ { 0x13143, 0x0 },
+ { 0x113143, 0x0 },
+ { 0x213143, 0x0 },
+ { 0x80, 0x0 },
+ { 0x100080, 0x0 },
+ { 0x200080, 0x0 },
+ { 0x1080, 0x0 },
+ { 0x101080, 0x0 },
+ { 0x201080, 0x0 },
+ { 0x2080, 0x0 },
+ { 0x102080, 0x0 },
+ { 0x202080, 0x0 },
+ { 0x3080, 0x0 },
+ { 0x103080, 0x0 },
+ { 0x203080, 0x0 },
+ { 0x4080, 0x0 },
+ { 0x104080, 0x0 },
+ { 0x204080, 0x0 },
+ { 0x5080, 0x0 },
+ { 0x105080, 0x0 },
+ { 0x205080, 0x0 },
+ { 0x6080, 0x0 },
+ { 0x106080, 0x0 },
+ { 0x206080, 0x0 },
+ { 0x7080, 0x0 },
+ { 0x107080, 0x0 },
+ { 0x207080, 0x0 },
+ { 0x8080, 0x0 },
+ { 0x108080, 0x0 },
+ { 0x208080, 0x0 },
+ { 0x9080, 0x0 },
+ { 0x109080, 0x0 },
+ { 0x209080, 0x0 },
+ { 0x10080, 0x0 },
+ { 0x110080, 0x0 },
+ { 0x210080, 0x0 },
+ { 0x10180, 0x0 },
+ { 0x110180, 0x0 },
+ { 0x210180, 0x0 },
+ { 0x11080, 0x0 },
+ { 0x111080, 0x0 },
+ { 0x211080, 0x0 },
+ { 0x11180, 0x0 },
+ { 0x111180, 0x0 },
+ { 0x211180, 0x0 },
+ { 0x12080, 0x0 },
+ { 0x112080, 0x0 },
+ { 0x212080, 0x0 },
+ { 0x12180, 0x0 },
+ { 0x112180, 0x0 },
+ { 0x212180, 0x0 },
+ { 0x13080, 0x0 },
+ { 0x113080, 0x0 },
+ { 0x213080, 0x0 },
+ { 0x13180, 0x0 },
+ { 0x113180, 0x0 },
+ { 0x213180, 0x0 },
+ { 0x10081, 0x0 },
+ { 0x110081, 0x0 },
+ { 0x210081, 0x0 },
+ { 0x10181, 0x0 },
+ { 0x110181, 0x0 },
+ { 0x210181, 0x0 },
+ { 0x11081, 0x0 },
+ { 0x111081, 0x0 },
+ { 0x211081, 0x0 },
+ { 0x11181, 0x0 },
+ { 0x111181, 0x0 },
+ { 0x211181, 0x0 },
+ { 0x12081, 0x0 },
+ { 0x112081, 0x0 },
+ { 0x212081, 0x0 },
+ { 0x12181, 0x0 },
+ { 0x112181, 0x0 },
+ { 0x212181, 0x0 },
+ { 0x13081, 0x0 },
+ { 0x113081, 0x0 },
+ { 0x213081, 0x0 },
+ { 0x13181, 0x0 },
+ { 0x113181, 0x0 },
+ { 0x213181, 0x0 },
+ { 0x100d0, 0x0 },
+ { 0x1100d0, 0x0 },
+ { 0x2100d0, 0x0 },
+ { 0x101d0, 0x0 },
+ { 0x1101d0, 0x0 },
+ { 0x2101d0, 0x0 },
+ { 0x110d0, 0x0 },
+ { 0x1110d0, 0x0 },
+ { 0x2110d0, 0x0 },
+ { 0x111d0, 0x0 },
+ { 0x1111d0, 0x0 },
+ { 0x2111d0, 0x0 },
+ { 0x120d0, 0x0 },
+ { 0x1120d0, 0x0 },
+ { 0x2120d0, 0x0 },
+ { 0x121d0, 0x0 },
+ { 0x1121d0, 0x0 },
+ { 0x2121d0, 0x0 },
+ { 0x130d0, 0x0 },
+ { 0x1130d0, 0x0 },
+ { 0x2130d0, 0x0 },
+ { 0x131d0, 0x0 },
+ { 0x1131d0, 0x0 },
+ { 0x2131d0, 0x0 },
+ { 0x100d1, 0x0 },
+ { 0x1100d1, 0x0 },
+ { 0x2100d1, 0x0 },
+ { 0x101d1, 0x0 },
+ { 0x1101d1, 0x0 },
+ { 0x2101d1, 0x0 },
+ { 0x110d1, 0x0 },
+ { 0x1110d1, 0x0 },
+ { 0x2110d1, 0x0 },
+ { 0x111d1, 0x0 },
+ { 0x1111d1, 0x0 },
+ { 0x2111d1, 0x0 },
+ { 0x120d1, 0x0 },
+ { 0x1120d1, 0x0 },
+ { 0x2120d1, 0x0 },
+ { 0x121d1, 0x0 },
+ { 0x1121d1, 0x0 },
+ { 0x2121d1, 0x0 },
+ { 0x130d1, 0x0 },
+ { 0x1130d1, 0x0 },
+ { 0x2130d1, 0x0 },
+ { 0x131d1, 0x0 },
+ { 0x1131d1, 0x0 },
+ { 0x2131d1, 0x0 },
+ { 0x10068, 0x0 },
+ { 0x10168, 0x0 },
+ { 0x10268, 0x0 },
+ { 0x10368, 0x0 },
+ { 0x10468, 0x0 },
+ { 0x10568, 0x0 },
+ { 0x10668, 0x0 },
+ { 0x10768, 0x0 },
+ { 0x10868, 0x0 },
+ { 0x11068, 0x0 },
+ { 0x11168, 0x0 },
+ { 0x11268, 0x0 },
+ { 0x11368, 0x0 },
+ { 0x11468, 0x0 },
+ { 0x11568, 0x0 },
+ { 0x11668, 0x0 },
+ { 0x11768, 0x0 },
+ { 0x11868, 0x0 },
+ { 0x12068, 0x0 },
+ { 0x12168, 0x0 },
+ { 0x12268, 0x0 },
+ { 0x12368, 0x0 },
+ { 0x12468, 0x0 },
+ { 0x12568, 0x0 },
+ { 0x12668, 0x0 },
+ { 0x12768, 0x0 },
+ { 0x12868, 0x0 },
+ { 0x13068, 0x0 },
+ { 0x13168, 0x0 },
+ { 0x13268, 0x0 },
+ { 0x13368, 0x0 },
+ { 0x13468, 0x0 },
+ { 0x13568, 0x0 },
+ { 0x13668, 0x0 },
+ { 0x13768, 0x0 },
+ { 0x13868, 0x0 },
+ { 0x10069, 0x0 },
+ { 0x10169, 0x0 },
+ { 0x10269, 0x0 },
+ { 0x10369, 0x0 },
+ { 0x10469, 0x0 },
+ { 0x10569, 0x0 },
+ { 0x10669, 0x0 },
+ { 0x10769, 0x0 },
+ { 0x10869, 0x0 },
+ { 0x11069, 0x0 },
+ { 0x11169, 0x0 },
+ { 0x11269, 0x0 },
+ { 0x11369, 0x0 },
+ { 0x11469, 0x0 },
+ { 0x11569, 0x0 },
+ { 0x11669, 0x0 },
+ { 0x11769, 0x0 },
+ { 0x11869, 0x0 },
+ { 0x12069, 0x0 },
+ { 0x12169, 0x0 },
+ { 0x12269, 0x0 },
+ { 0x12369, 0x0 },
+ { 0x12469, 0x0 },
+ { 0x12569, 0x0 },
+ { 0x12669, 0x0 },
+ { 0x12769, 0x0 },
+ { 0x12869, 0x0 },
+ { 0x13069, 0x0 },
+ { 0x13169, 0x0 },
+ { 0x13269, 0x0 },
+ { 0x13369, 0x0 },
+ { 0x13469, 0x0 },
+ { 0x13569, 0x0 },
+ { 0x13669, 0x0 },
+ { 0x13769, 0x0 },
+ { 0x13869, 0x0 },
+ { 0x1008c, 0x0 },
+ { 0x11008c, 0x0 },
+ { 0x21008c, 0x0 },
+ { 0x1018c, 0x0 },
+ { 0x11018c, 0x0 },
+ { 0x21018c, 0x0 },
+ { 0x1108c, 0x0 },
+ { 0x11108c, 0x0 },
+ { 0x21108c, 0x0 },
+ { 0x1118c, 0x0 },
+ { 0x11118c, 0x0 },
+ { 0x21118c, 0x0 },
+ { 0x1208c, 0x0 },
+ { 0x11208c, 0x0 },
+ { 0x21208c, 0x0 },
+ { 0x1218c, 0x0 },
+ { 0x11218c, 0x0 },
+ { 0x21218c, 0x0 },
+ { 0x1308c, 0x0 },
+ { 0x11308c, 0x0 },
+ { 0x21308c, 0x0 },
+ { 0x1318c, 0x0 },
+ { 0x11318c, 0x0 },
+ { 0x21318c, 0x0 },
+ { 0x1008d, 0x0 },
+ { 0x11008d, 0x0 },
+ { 0x21008d, 0x0 },
+ { 0x1018d, 0x0 },
+ { 0x11018d, 0x0 },
+ { 0x21018d, 0x0 },
+ { 0x1108d, 0x0 },
+ { 0x11108d, 0x0 },
+ { 0x21108d, 0x0 },
+ { 0x1118d, 0x0 },
+ { 0x11118d, 0x0 },
+ { 0x21118d, 0x0 },
+ { 0x1208d, 0x0 },
+ { 0x11208d, 0x0 },
+ { 0x21208d, 0x0 },
+ { 0x1218d, 0x0 },
+ { 0x11218d, 0x0 },
+ { 0x21218d, 0x0 },
+ { 0x1308d, 0x0 },
+ { 0x11308d, 0x0 },
+ { 0x21308d, 0x0 },
+ { 0x1318d, 0x0 },
+ { 0x11318d, 0x0 },
+ { 0x21318d, 0x0 },
+ { 0x100c0, 0x0 },
+ { 0x1100c0, 0x0 },
+ { 0x2100c0, 0x0 },
+ { 0x101c0, 0x0 },
+ { 0x1101c0, 0x0 },
+ { 0x2101c0, 0x0 },
+ { 0x102c0, 0x0 },
+ { 0x1102c0, 0x0 },
+ { 0x2102c0, 0x0 },
+ { 0x103c0, 0x0 },
+ { 0x1103c0, 0x0 },
+ { 0x2103c0, 0x0 },
+ { 0x104c0, 0x0 },
+ { 0x1104c0, 0x0 },
+ { 0x2104c0, 0x0 },
+ { 0x105c0, 0x0 },
+ { 0x1105c0, 0x0 },
+ { 0x2105c0, 0x0 },
+ { 0x106c0, 0x0 },
+ { 0x1106c0, 0x0 },
+ { 0x2106c0, 0x0 },
+ { 0x107c0, 0x0 },
+ { 0x1107c0, 0x0 },
+ { 0x2107c0, 0x0 },
+ { 0x108c0, 0x0 },
+ { 0x1108c0, 0x0 },
+ { 0x2108c0, 0x0 },
+ { 0x110c0, 0x0 },
+ { 0x1110c0, 0x0 },
+ { 0x2110c0, 0x0 },
+ { 0x111c0, 0x0 },
+ { 0x1111c0, 0x0 },
+ { 0x2111c0, 0x0 },
+ { 0x112c0, 0x0 },
+ { 0x1112c0, 0x0 },
+ { 0x2112c0, 0x0 },
+ { 0x113c0, 0x0 },
+ { 0x1113c0, 0x0 },
+ { 0x2113c0, 0x0 },
+ { 0x114c0, 0x0 },
+ { 0x1114c0, 0x0 },
+ { 0x2114c0, 0x0 },
+ { 0x115c0, 0x0 },
+ { 0x1115c0, 0x0 },
+ { 0x2115c0, 0x0 },
+ { 0x116c0, 0x0 },
+ { 0x1116c0, 0x0 },
+ { 0x2116c0, 0x0 },
+ { 0x117c0, 0x0 },
+ { 0x1117c0, 0x0 },
+ { 0x2117c0, 0x0 },
+ { 0x118c0, 0x0 },
+ { 0x1118c0, 0x0 },
+ { 0x2118c0, 0x0 },
+ { 0x120c0, 0x0 },
+ { 0x1120c0, 0x0 },
+ { 0x2120c0, 0x0 },
+ { 0x121c0, 0x0 },
+ { 0x1121c0, 0x0 },
+ { 0x2121c0, 0x0 },
+ { 0x122c0, 0x0 },
+ { 0x1122c0, 0x0 },
+ { 0x2122c0, 0x0 },
+ { 0x123c0, 0x0 },
+ { 0x1123c0, 0x0 },
+ { 0x2123c0, 0x0 },
+ { 0x124c0, 0x0 },
+ { 0x1124c0, 0x0 },
+ { 0x2124c0, 0x0 },
+ { 0x125c0, 0x0 },
+ { 0x1125c0, 0x0 },
+ { 0x2125c0, 0x0 },
+ { 0x126c0, 0x0 },
+ { 0x1126c0, 0x0 },
+ { 0x2126c0, 0x0 },
+ { 0x127c0, 0x0 },
+ { 0x1127c0, 0x0 },
+ { 0x2127c0, 0x0 },
+ { 0x128c0, 0x0 },
+ { 0x1128c0, 0x0 },
+ { 0x2128c0, 0x0 },
+ { 0x130c0, 0x0 },
+ { 0x1130c0, 0x0 },
+ { 0x2130c0, 0x0 },
+ { 0x131c0, 0x0 },
+ { 0x1131c0, 0x0 },
+ { 0x2131c0, 0x0 },
+ { 0x132c0, 0x0 },
+ { 0x1132c0, 0x0 },
+ { 0x2132c0, 0x0 },
+ { 0x133c0, 0x0 },
+ { 0x1133c0, 0x0 },
+ { 0x2133c0, 0x0 },
+ { 0x134c0, 0x0 },
+ { 0x1134c0, 0x0 },
+ { 0x2134c0, 0x0 },
+ { 0x135c0, 0x0 },
+ { 0x1135c0, 0x0 },
+ { 0x2135c0, 0x0 },
+ { 0x136c0, 0x0 },
+ { 0x1136c0, 0x0 },
+ { 0x2136c0, 0x0 },
+ { 0x137c0, 0x0 },
+ { 0x1137c0, 0x0 },
+ { 0x2137c0, 0x0 },
+ { 0x138c0, 0x0 },
+ { 0x1138c0, 0x0 },
+ { 0x2138c0, 0x0 },
+ { 0x100c1, 0x0 },
+ { 0x1100c1, 0x0 },
+ { 0x2100c1, 0x0 },
+ { 0x101c1, 0x0 },
+ { 0x1101c1, 0x0 },
+ { 0x2101c1, 0x0 },
+ { 0x102c1, 0x0 },
+ { 0x1102c1, 0x0 },
+ { 0x2102c1, 0x0 },
+ { 0x103c1, 0x0 },
+ { 0x1103c1, 0x0 },
+ { 0x2103c1, 0x0 },
+ { 0x104c1, 0x0 },
+ { 0x1104c1, 0x0 },
+ { 0x2104c1, 0x0 },
+ { 0x105c1, 0x0 },
+ { 0x1105c1, 0x0 },
+ { 0x2105c1, 0x0 },
+ { 0x106c1, 0x0 },
+ { 0x1106c1, 0x0 },
+ { 0x2106c1, 0x0 },
+ { 0x107c1, 0x0 },
+ { 0x1107c1, 0x0 },
+ { 0x2107c1, 0x0 },
+ { 0x108c1, 0x0 },
+ { 0x1108c1, 0x0 },
+ { 0x2108c1, 0x0 },
+ { 0x110c1, 0x0 },
+ { 0x1110c1, 0x0 },
+ { 0x2110c1, 0x0 },
+ { 0x111c1, 0x0 },
+ { 0x1111c1, 0x0 },
+ { 0x2111c1, 0x0 },
+ { 0x112c1, 0x0 },
+ { 0x1112c1, 0x0 },
+ { 0x2112c1, 0x0 },
+ { 0x113c1, 0x0 },
+ { 0x1113c1, 0x0 },
+ { 0x2113c1, 0x0 },
+ { 0x114c1, 0x0 },
+ { 0x1114c1, 0x0 },
+ { 0x2114c1, 0x0 },
+ { 0x115c1, 0x0 },
+ { 0x1115c1, 0x0 },
+ { 0x2115c1, 0x0 },
+ { 0x116c1, 0x0 },
+ { 0x1116c1, 0x0 },
+ { 0x2116c1, 0x0 },
+ { 0x117c1, 0x0 },
+ { 0x1117c1, 0x0 },
+ { 0x2117c1, 0x0 },
+ { 0x118c1, 0x0 },
+ { 0x1118c1, 0x0 },
+ { 0x2118c1, 0x0 },
+ { 0x120c1, 0x0 },
+ { 0x1120c1, 0x0 },
+ { 0x2120c1, 0x0 },
+ { 0x121c1, 0x0 },
+ { 0x1121c1, 0x0 },
+ { 0x2121c1, 0x0 },
+ { 0x122c1, 0x0 },
+ { 0x1122c1, 0x0 },
+ { 0x2122c1, 0x0 },
+ { 0x123c1, 0x0 },
+ { 0x1123c1, 0x0 },
+ { 0x2123c1, 0x0 },
+ { 0x124c1, 0x0 },
+ { 0x1124c1, 0x0 },
+ { 0x2124c1, 0x0 },
+ { 0x125c1, 0x0 },
+ { 0x1125c1, 0x0 },
+ { 0x2125c1, 0x0 },
+ { 0x126c1, 0x0 },
+ { 0x1126c1, 0x0 },
+ { 0x2126c1, 0x0 },
+ { 0x127c1, 0x0 },
+ { 0x1127c1, 0x0 },
+ { 0x2127c1, 0x0 },
+ { 0x128c1, 0x0 },
+ { 0x1128c1, 0x0 },
+ { 0x2128c1, 0x0 },
+ { 0x130c1, 0x0 },
+ { 0x1130c1, 0x0 },
+ { 0x2130c1, 0x0 },
+ { 0x131c1, 0x0 },
+ { 0x1131c1, 0x0 },
+ { 0x2131c1, 0x0 },
+ { 0x132c1, 0x0 },
+ { 0x1132c1, 0x0 },
+ { 0x2132c1, 0x0 },
+ { 0x133c1, 0x0 },
+ { 0x1133c1, 0x0 },
+ { 0x2133c1, 0x0 },
+ { 0x134c1, 0x0 },
+ { 0x1134c1, 0x0 },
+ { 0x2134c1, 0x0 },
+ { 0x135c1, 0x0 },
+ { 0x1135c1, 0x0 },
+ { 0x2135c1, 0x0 },
+ { 0x136c1, 0x0 },
+ { 0x1136c1, 0x0 },
+ { 0x2136c1, 0x0 },
+ { 0x137c1, 0x0 },
+ { 0x1137c1, 0x0 },
+ { 0x2137c1, 0x0 },
+ { 0x138c1, 0x0 },
+ { 0x1138c1, 0x0 },
+ { 0x2138c1, 0x0 },
+ { 0x10020, 0x0 },
+ { 0x110020, 0x0 },
+ { 0x210020, 0x0 },
+ { 0x11020, 0x0 },
+ { 0x111020, 0x0 },
+ { 0x211020, 0x0 },
+ { 0x12020, 0x0 },
+ { 0x112020, 0x0 },
+ { 0x212020, 0x0 },
+ { 0x13020, 0x0 },
+ { 0x113020, 0x0 },
+ { 0x213020, 0x0 },
+ { 0x20072, 0x0 },
+ { 0x20073, 0x0 },
+ { 0x20074, 0x0 },
+ { 0x100aa, 0x0 },
+ { 0x110aa, 0x0 },
+ { 0x120aa, 0x0 },
+ { 0x130aa, 0x0 },
+ { 0x20010, 0x0 },
+ { 0x120010, 0x0 },
+ { 0x220010, 0x0 },
+ { 0x20011, 0x0 },
+ { 0x120011, 0x0 },
+ { 0x220011, 0x0 },
+ { 0x100ae, 0x0 },
+ { 0x1100ae, 0x0 },
+ { 0x2100ae, 0x0 },
+ { 0x100af, 0x0 },
+ { 0x1100af, 0x0 },
+ { 0x2100af, 0x0 },
+ { 0x110ae, 0x0 },
+ { 0x1110ae, 0x0 },
+ { 0x2110ae, 0x0 },
+ { 0x110af, 0x0 },
+ { 0x1110af, 0x0 },
+ { 0x2110af, 0x0 },
+ { 0x120ae, 0x0 },
+ { 0x1120ae, 0x0 },
+ { 0x2120ae, 0x0 },
+ { 0x120af, 0x0 },
+ { 0x1120af, 0x0 },
+ { 0x2120af, 0x0 },
+ { 0x130ae, 0x0 },
+ { 0x1130ae, 0x0 },
+ { 0x2130ae, 0x0 },
+ { 0x130af, 0x0 },
+ { 0x1130af, 0x0 },
+ { 0x2130af, 0x0 },
+ { 0x20020, 0x0 },
+ { 0x120020, 0x0 },
+ { 0x220020, 0x0 },
+ { 0x100a0, 0x0 },
+ { 0x100a1, 0x0 },
+ { 0x100a2, 0x0 },
+ { 0x100a3, 0x0 },
+ { 0x100a4, 0x0 },
+ { 0x100a5, 0x0 },
+ { 0x100a6, 0x0 },
+ { 0x100a7, 0x0 },
+ { 0x110a0, 0x0 },
+ { 0x110a1, 0x0 },
+ { 0x110a2, 0x0 },
+ { 0x110a3, 0x0 },
+ { 0x110a4, 0x0 },
+ { 0x110a5, 0x0 },
+ { 0x110a6, 0x0 },
+ { 0x110a7, 0x0 },
+ { 0x120a0, 0x0 },
+ { 0x120a1, 0x0 },
+ { 0x120a2, 0x0 },
+ { 0x120a3, 0x0 },
+ { 0x120a4, 0x0 },
+ { 0x120a5, 0x0 },
+ { 0x120a6, 0x0 },
+ { 0x120a7, 0x0 },
+ { 0x130a0, 0x0 },
+ { 0x130a1, 0x0 },
+ { 0x130a2, 0x0 },
+ { 0x130a3, 0x0 },
+ { 0x130a4, 0x0 },
+ { 0x130a5, 0x0 },
+ { 0x130a6, 0x0 },
+ { 0x130a7, 0x0 },
+ { 0x2007c, 0x0 },
+ { 0x12007c, 0x0 },
+ { 0x22007c, 0x0 },
+ { 0x2007d, 0x0 },
+ { 0x12007d, 0x0 },
+ { 0x22007d, 0x0 },
+ { 0x400fd, 0x0 },
+ { 0x400c0, 0x0 },
+ { 0x90201, 0x0 },
+ { 0x190201, 0x0 },
+ { 0x290201, 0x0 },
+ { 0x90202, 0x0 },
+ { 0x190202, 0x0 },
+ { 0x290202, 0x0 },
+ { 0x90203, 0x0 },
+ { 0x190203, 0x0 },
+ { 0x290203, 0x0 },
+ { 0x90204, 0x0 },
+ { 0x190204, 0x0 },
+ { 0x290204, 0x0 },
+ { 0x90205, 0x0 },
+ { 0x190205, 0x0 },
+ { 0x290205, 0x0 },
+ { 0x90206, 0x0 },
+ { 0x190206, 0x0 },
+ { 0x290206, 0x0 },
+ { 0x90207, 0x0 },
+ { 0x190207, 0x0 },
+ { 0x290207, 0x0 },
+ { 0x90208, 0x0 },
+ { 0x190208, 0x0 },
+ { 0x290208, 0x0 },
+ { 0x10062, 0x0 },
+ { 0x10162, 0x0 },
+ { 0x10262, 0x0 },
+ { 0x10362, 0x0 },
+ { 0x10462, 0x0 },
+ { 0x10562, 0x0 },
+ { 0x10662, 0x0 },
+ { 0x10762, 0x0 },
+ { 0x10862, 0x0 },
+ { 0x11062, 0x0 },
+ { 0x11162, 0x0 },
+ { 0x11262, 0x0 },
+ { 0x11362, 0x0 },
+ { 0x11462, 0x0 },
+ { 0x11562, 0x0 },
+ { 0x11662, 0x0 },
+ { 0x11762, 0x0 },
+ { 0x11862, 0x0 },
+ { 0x12062, 0x0 },
+ { 0x12162, 0x0 },
+ { 0x12262, 0x0 },
+ { 0x12362, 0x0 },
+ { 0x12462, 0x0 },
+ { 0x12562, 0x0 },
+ { 0x12662, 0x0 },
+ { 0x12762, 0x0 },
+ { 0x12862, 0x0 },
+ { 0x13062, 0x0 },
+ { 0x13162, 0x0 },
+ { 0x13262, 0x0 },
+ { 0x13362, 0x0 },
+ { 0x13462, 0x0 },
+ { 0x13562, 0x0 },
+ { 0x13662, 0x0 },
+ { 0x13762, 0x0 },
+ { 0x13862, 0x0 },
+ { 0x20077, 0x0 },
+ { 0x10001, 0x0 },
+ { 0x11001, 0x0 },
+ { 0x12001, 0x0 },
+ { 0x13001, 0x0 },
+ { 0x10040, 0x0 },
+ { 0x10140, 0x0 },
+ { 0x10240, 0x0 },
+ { 0x10340, 0x0 },
+ { 0x10440, 0x0 },
+ { 0x10540, 0x0 },
+ { 0x10640, 0x0 },
+ { 0x10740, 0x0 },
+ { 0x10840, 0x0 },
+ { 0x10030, 0x0 },
+ { 0x10130, 0x0 },
+ { 0x10230, 0x0 },
+ { 0x10330, 0x0 },
+ { 0x10430, 0x0 },
+ { 0x10530, 0x0 },
+ { 0x10630, 0x0 },
+ { 0x10730, 0x0 },
+ { 0x10830, 0x0 },
+ { 0x11040, 0x0 },
+ { 0x11140, 0x0 },
+ { 0x11240, 0x0 },
+ { 0x11340, 0x0 },
+ { 0x11440, 0x0 },
+ { 0x11540, 0x0 },
+ { 0x11640, 0x0 },
+ { 0x11740, 0x0 },
+ { 0x11840, 0x0 },
+ { 0x11030, 0x0 },
+ { 0x11130, 0x0 },
+ { 0x11230, 0x0 },
+ { 0x11330, 0x0 },
+ { 0x11430, 0x0 },
+ { 0x11530, 0x0 },
+ { 0x11630, 0x0 },
+ { 0x11730, 0x0 },
+ { 0x11830, 0x0 },
+ { 0x12040, 0x0 },
+ { 0x12140, 0x0 },
+ { 0x12240, 0x0 },
+ { 0x12340, 0x0 },
+ { 0x12440, 0x0 },
+ { 0x12540, 0x0 },
+ { 0x12640, 0x0 },
+ { 0x12740, 0x0 },
+ { 0x12840, 0x0 },
+ { 0x12030, 0x0 },
+ { 0x12130, 0x0 },
+ { 0x12230, 0x0 },
+ { 0x12330, 0x0 },
+ { 0x12430, 0x0 },
+ { 0x12530, 0x0 },
+ { 0x12630, 0x0 },
+ { 0x12730, 0x0 },
+ { 0x12830, 0x0 },
+ { 0x13040, 0x0 },
+ { 0x13140, 0x0 },
+ { 0x13240, 0x0 },
+ { 0x13340, 0x0 },
+ { 0x13440, 0x0 },
+ { 0x13540, 0x0 },
+ { 0x13640, 0x0 },
+ { 0x13740, 0x0 },
+ { 0x13840, 0x0 },
+ { 0x13030, 0x0 },
+ { 0x13130, 0x0 },
+ { 0x13230, 0x0 },
+ { 0x13330, 0x0 },
+ { 0x13430, 0x0 },
+ { 0x13530, 0x0 },
+ { 0x13630, 0x0 },
+ { 0x13730, 0x0 },
+ { 0x13830, 0x0 },
+};
+
+uint32_t ddrphy_trained_csr_num = ARRAY_SIZE(ddrphy_trained_csr);
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+#include <common.h>
+#include <linux/kernel.h>
+#include <asm/arch/ddr.h>
+#include <asm/arch/lpddr4_define.h>
+
+void ddr_cfg_phy(struct dram_timing_info *dram_timing)
+{
+ struct dram_cfg_param *dram_cfg;
+ struct dram_fsp_msg *fsp_msg;
+ unsigned int num;
+ int i = 0;
+ int j = 0;
+
+ /* initialize PHY configuration */
+ dram_cfg = dram_timing->ddrphy_cfg;
+ num = dram_timing->ddrphy_cfg_num;
+ for (i = 0; i < num; i++) {
+ /* config phy reg */
+ dwc_ddrphy_apb_wr(dram_cfg->reg, dram_cfg->val);
+ dram_cfg++;
+ }
+
+ /* load the frequency setpoint message block config */
+ fsp_msg = dram_timing->fsp_msg;
+ for (i = 0; i < dram_timing->fsp_msg_num; i++) {
+ debug("DRAM PHY training for %dMTS\n", fsp_msg->drate);
+ /* set dram PHY input clocks to desired frequency */
+ ddrphy_init_set_dfi_clk(fsp_msg->drate);
+
+ /* load the dram training firmware image */
+ dwc_ddrphy_apb_wr(0xd0000, 0x0);
+ ddr_load_train_firmware(fsp_msg->fw_type);
+
+ /* load the frequency set point message block parameter */
+ dram_cfg = fsp_msg->fsp_cfg;
+ num = fsp_msg->fsp_cfg_num;
+ for (j = 0; j < num; j++) {
+ dwc_ddrphy_apb_wr(dram_cfg->reg, dram_cfg->val);
+ dram_cfg++;
+ }
+
+ /*
+ * -------------------- excute the firmware --------------------
+ * Running the firmware is a simply process to taking the
+ * PMU out of reset and stall, then the firwmare will be run
+ * 1. reset the PMU;
+ * 2. begin the excution;
+ * 3. wait for the training done;
+ * 4. read the message block result.
+ * -------------------------------------------------------------
+ */
+ dwc_ddrphy_apb_wr(0xd0000, 0x1);
+ dwc_ddrphy_apb_wr(0xd0099, 0x9);
+ dwc_ddrphy_apb_wr(0xd0099, 0x1);
+ dwc_ddrphy_apb_wr(0xd0099, 0x0);
+
+ /* Wait for the training firmware to complete */
+ wait_ddrphy_training_complete();
+
+ /* Halt the microcontroller. */
+ dwc_ddrphy_apb_wr(0xd0099, 0x1);
+
+ /* Read the Message Block results */
+ dwc_ddrphy_apb_wr(0xd0000, 0x0);
+ ddrphy_init_read_msg_block(fsp_msg->fw_type);
+ dwc_ddrphy_apb_wr(0xd0000, 0x1);
+
+ fsp_msg++;
+ }
+
+ /* Load PHY Init Engine Image */
+ dram_cfg = dram_timing->ddrphy_pie;
+ num = dram_timing->ddrphy_pie_num;
+ for (i = 0; i < num; i++) {
+ dwc_ddrphy_apb_wr(dram_cfg->reg, dram_cfg->val);
+ dram_cfg++;
+ }
+
+ /* save the ddr PHY trained CSR in memory for low power use */
+ ddrphy_trained_csr_save(ddrphy_trained_csr, ddrphy_trained_csr_num);
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+* Copyright 2018 NXP
+*/
+
+#include <common.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <asm/arch/ddr.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/ddr.h>
+#include <asm/arch/lpddr4_define.h>
+
+static inline void poll_pmu_message_ready(void)
+{
+ unsigned int reg;
+
+ do {
+ reg = reg32_read(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0xd0004);
+ } while (reg & 0x1);
+}
+
+static inline void ack_pmu_message_receive(void)
+{
+ unsigned int reg;
+
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0xd0031, 0x0);
+
+ do {
+ reg = reg32_read(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0xd0004);
+ } while (!(reg & 0x1));
+
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0xd0031, 0x1);
+}
+
+static inline unsigned int get_mail(void)
+{
+ unsigned int reg;
+
+ poll_pmu_message_ready();
+
+ reg = reg32_read(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0xd0032);
+
+ ack_pmu_message_receive();
+
+ return reg;
+}
+
+static inline unsigned int get_stream_message(void)
+{
+ unsigned int reg, reg2;
+
+ poll_pmu_message_ready();
+
+ reg = reg32_read(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0xd0032);
+
+ reg2 = reg32_read(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0xd0034);
+
+ reg2 = (reg2 << 16) | reg;
+
+ ack_pmu_message_receive();
+
+ return reg2;
+}
+
+static inline void decode_major_message(unsigned int mail)
+{
+ debug("[PMU Major message = 0x%08x]\n", mail);
+}
+
+static inline void decode_streaming_message(void)
+{
+ unsigned int string_index, arg __maybe_unused;
+ int i = 0;
+
+ string_index = get_stream_message();
+ debug("PMU String index = 0x%08x\n", string_index);
+ while (i < (string_index & 0xffff)) {
+ arg = get_stream_message();
+ debug("arg[%d] = 0x%08x\n", i, arg);
+ i++;
+ }
+
+ debug("\n");
+}
+
+void wait_ddrphy_training_complete(void)
+{
+ unsigned int mail;
+
+ while (1) {
+ mail = get_mail();
+ decode_major_message(mail);
+ if (mail == 0x08) {
+ decode_streaming_message();
+ } else if (mail == 0x07) {
+ debug("Training PASS\n");
+ break;
+ } else if (mail == 0xff) {
+ printf("Training FAILED\n");
+ break;
+ }
+ }
+}
+
+void ddrphy_init_set_dfi_clk(unsigned int drate)
+{
+ switch (drate) {
+ case 3200:
+ dram_pll_init(MHZ(800));
+ dram_disable_bypass();
+ break;
+ case 3000:
+ dram_pll_init(MHZ(750));
+ dram_disable_bypass();
+ break;
+ case 2400:
+ dram_pll_init(MHZ(600));
+ dram_disable_bypass();
+ break;
+ case 1600:
+ dram_pll_init(MHZ(400));
+ dram_disable_bypass();
+ break;
+ case 667:
+ dram_pll_init(MHZ(167));
+ dram_disable_bypass();
+ break;
+ case 400:
+ dram_enable_bypass(MHZ(400));
+ break;
+ case 100:
+ dram_enable_bypass(MHZ(100));
+ break;
+ default:
+ return;
+ }
+}
+
+void ddrphy_init_read_msg_block(enum fw_type type)
+{
+}
+
+void lpddr4_mr_write(unsigned int mr_rank, unsigned int mr_addr,
+ unsigned int mr_data)
+{
+ unsigned int tmp;
+ /*
+ * 1. Poll MRSTAT.mr_wr_busy until it is 0.
+ * This checks that there is no outstanding MR transaction.
+ * No writes should be performed to MRCTRL0 and MRCTRL1 if
+ * MRSTAT.mr_wr_busy = 1.
+ */
+ do {
+ tmp = reg32_read(DDRC_MRSTAT(0));
+ } while (tmp & 0x1);
+ /*
+ * 2. Write the MRCTRL0.mr_type, MRCTRL0.mr_addr, MRCTRL0.mr_rank and
+ * (for MRWs) MRCTRL1.mr_data to define the MR transaction.
+ */
+ reg32_write(DDRC_MRCTRL0(0), (mr_rank << 4));
+ reg32_write(DDRC_MRCTRL1(0), (mr_addr << 8) | mr_data);
+ reg32setbit(DDRC_MRCTRL0(0), 31);
+}
+
+unsigned int lpddr4_mr_read(unsigned int mr_rank, unsigned int mr_addr)
+{
+ unsigned int tmp;
+
+ reg32_write(DRC_PERF_MON_MRR0_DAT(0), 0x1);
+ do {
+ tmp = reg32_read(DDRC_MRSTAT(0));
+ } while (tmp & 0x1);
+
+ reg32_write(DDRC_MRCTRL0(0), (mr_rank << 4) | 0x1);
+ reg32_write(DDRC_MRCTRL1(0), (mr_addr << 8));
+ reg32setbit(DDRC_MRCTRL0(0), 31);
+ do {
+ tmp = reg32_read(DRC_PERF_MON_MRR0_DAT(0));
+ } while ((tmp & 0x8) == 0);
+ tmp = reg32_read(DRC_PERF_MON_MRR1_DAT(0));
+ tmp = tmp & 0xff;
+ reg32_write(DRC_PERF_MON_MRR0_DAT(0), 0x4);
+
+ return tmp;
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+#include <common.h>
+#include <spl.h>
+#include <asm/io.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <asm/arch/ddr.h>
+#include <asm/arch/ddr.h>
+#include <asm/arch/lpddr4_define.h>
+#include <asm/sections.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define IMEM_LEN 32768 /* byte */
+#define DMEM_LEN 16384 /* byte */
+#define IMEM_2D_OFFSET 49152
+
+#define IMEM_OFFSET_ADDR 0x00050000
+#define DMEM_OFFSET_ADDR 0x00054000
+#define DDR_TRAIN_CODE_BASE_ADDR IP2APB_DDRPHY_IPS_BASE_ADDR(0)
+
+/* We need PHY iMEM PHY is 32KB padded */
+void ddr_load_train_firmware(enum fw_type type)
+{
+ u32 tmp32, i;
+ u32 error = 0;
+ unsigned long pr_to32, pr_from32;
+ unsigned long fw_offset = type ? IMEM_2D_OFFSET : 0;
+ unsigned long imem_start = (unsigned long)&_end + fw_offset;
+ unsigned long dmem_start = imem_start + IMEM_LEN;
+
+ pr_from32 = imem_start;
+ pr_to32 = DDR_TRAIN_CODE_BASE_ADDR + 4 * IMEM_OFFSET_ADDR;
+ for (i = 0x0; i < IMEM_LEN; ) {
+ tmp32 = readl(pr_from32);
+ writew(tmp32 & 0x0000ffff, pr_to32);
+ pr_to32 += 4;
+ writew((tmp32 >> 16) & 0x0000ffff, pr_to32);
+ pr_to32 += 4;
+ pr_from32 += 4;
+ i += 4;
+ }
+
+ pr_from32 = dmem_start;
+ pr_to32 = DDR_TRAIN_CODE_BASE_ADDR + 4 * DMEM_OFFSET_ADDR;
+ for (i = 0x0; i < DMEM_LEN; ) {
+ tmp32 = readl(pr_from32);
+ writew(tmp32 & 0x0000ffff, pr_to32);
+ pr_to32 += 4;
+ writew((tmp32 >> 16) & 0x0000ffff, pr_to32);
+ pr_to32 += 4;
+ pr_from32 += 4;
+ i += 4;
+ }
+
+ debug("check ddr4_pmu_train_imem code\n");
+ pr_from32 = imem_start;
+ pr_to32 = DDR_TRAIN_CODE_BASE_ADDR + 4 * IMEM_OFFSET_ADDR;
+ for (i = 0x0; i < IMEM_LEN; ) {
+ tmp32 = (readw(pr_to32) & 0x0000ffff);
+ pr_to32 += 4;
+ tmp32 += ((readw(pr_to32) & 0x0000ffff) << 16);
+
+ if (tmp32 != readl(pr_from32)) {
+ debug("%lx %lx\n", pr_from32, pr_to32);
+ error++;
+ }
+ pr_from32 += 4;
+ pr_to32 += 4;
+ i += 4;
+ }
+ if (error)
+ printf("check ddr4_pmu_train_imem code fail=%d\n", error);
+ else
+ debug("check ddr4_pmu_train_imem code pass\n");
+
+ debug("check ddr4_pmu_train_dmem code\n");
+ pr_from32 = dmem_start;
+ pr_to32 = DDR_TRAIN_CODE_BASE_ADDR + 4 * DMEM_OFFSET_ADDR;
+ for (i = 0x0; i < DMEM_LEN;) {
+ tmp32 = (readw(pr_to32) & 0x0000ffff);
+ pr_to32 += 4;
+ tmp32 += ((readw(pr_to32) & 0x0000ffff) << 16);
+ if (tmp32 != readl(pr_from32)) {
+ debug("%lx %lx\n", pr_from32, pr_to32);
+ error++;
+ }
+ pr_from32 += 4;
+ pr_to32 += 4;
+ i += 4;
+ }
+
+ if (error)
+ printf("check ddr4_pmu_train_dmem code fail=%d", error);
+ else
+ debug("check ddr4_pmu_train_dmem code pass\n");
+}
+
+void ddrphy_trained_csr_save(struct dram_cfg_param *ddrphy_csr,
+ unsigned int num)
+{
+ int i = 0;
+
+ /* enable the ddrphy apb */
+ dwc_ddrphy_apb_wr(0xd0000, 0x0);
+ dwc_ddrphy_apb_wr(0xc0080, 0x3);
+ for (i = 0; i < num; i++) {
+ ddrphy_csr->val = dwc_ddrphy_apb_rd(ddrphy_csr->reg);
+ ddrphy_csr++;
+ }
+ /* disable the ddrphy apb */
+ dwc_ddrphy_apb_wr(0xc0080, 0x2);
+ dwc_ddrphy_apb_wr(0xd0000, 0x1);
+}
+
+void dram_config_save(struct dram_timing_info *timing_info,
+ unsigned long saved_timing_base)
+{
+ int i = 0;
+ struct dram_timing_info *saved_timing = (struct dram_timing_info *)saved_timing_base;
+ struct dram_cfg_param *cfg;
+
+ saved_timing->ddrc_cfg_num = timing_info->ddrc_cfg_num;
+ saved_timing->ddrphy_cfg_num = timing_info->ddrphy_cfg_num;
+ saved_timing->ddrphy_trained_csr_num = ddrphy_trained_csr_num;
+ saved_timing->ddrphy_pie_num = timing_info->ddrphy_pie_num;
+
+ /* save the fsp table */
+ for (i = 0; i < 4; i++)
+ saved_timing->fsp_table[i] = timing_info->fsp_table[i];
+
+ cfg = (struct dram_cfg_param *)(saved_timing_base +
+ sizeof(*timing_info));
+
+ /* save ddrc config */
+ saved_timing->ddrc_cfg = cfg;
+ for (i = 0; i < timing_info->ddrc_cfg_num; i++) {
+ cfg->reg = timing_info->ddrc_cfg[i].reg;
+ cfg->val = timing_info->ddrc_cfg[i].val;
+ cfg++;
+ }
+
+ /* save ddrphy config */
+ saved_timing->ddrphy_cfg = cfg;
+ for (i = 0; i < timing_info->ddrphy_cfg_num; i++) {
+ cfg->reg = timing_info->ddrphy_cfg[i].reg;
+ cfg->val = timing_info->ddrphy_cfg[i].val;
+ cfg++;
+ }
+
+ /* save the ddrphy csr */
+ saved_timing->ddrphy_trained_csr = cfg;
+ for (i = 0; i < ddrphy_trained_csr_num; i++) {
+ cfg->reg = ddrphy_trained_csr[i].reg;
+ cfg->val = ddrphy_trained_csr[i].val;
+ cfg++;
+ }
+
+ /* save the ddrphy pie */
+ saved_timing->ddrphy_pie = cfg;
+ for (i = 0; i < timing_info->ddrphy_pie_num; i++) {
+ cfg->reg = timing_info->ddrphy_pie[i].reg;
+ cfg->val = timing_info->ddrphy_pie[i].val;
+ cfg++;
+ }
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+* Copyright 2018 NXP
+*
+*/
+
+#include <common.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <asm/arch/ddr.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/ddr.h>
+#include <asm/arch/lpddr4_define.h>
+#include <asm/arch/sys_proto.h>
+
+void lpddr4_cfg_umctl2(struct dram_cfg_param *ddrc_cfg, int num)
+{
+ int i = 0;
+
+ for (i = 0; i < num; i++) {
+ reg32_write(ddrc_cfg->reg, ddrc_cfg->val);
+ ddrc_cfg++;
+ }
+}
+
+void ddr_init(struct dram_timing_info *dram_timing)
+{
+ unsigned int tmp;
+
+ debug("DDRINFO: start lpddr4 ddr init\n");
+ /* step 1: reset */
+ if (is_imx8mq()) {
+ reg32_write(SRC_DDRC_RCR_ADDR + 0x04, 0x8F00000F);
+ reg32_write(SRC_DDRC_RCR_ADDR, 0x8F00000F);
+ reg32_write(SRC_DDRC_RCR_ADDR + 0x04, 0x8F000000);
+ } else {
+ reg32_write(SRC_DDRC_RCR_ADDR, 0x8F00001F);
+ reg32_write(SRC_DDRC_RCR_ADDR, 0x8F00000F);
+ }
+
+ mdelay(100);
+
+ debug("DDRINFO: reset done\n");
+ /*
+ * change the clock source of dram_apb_clk_root:
+ * source 4 800MHz /4 = 200MHz
+ */
+ clock_set_target_val(DRAM_APB_CLK_ROOT, CLK_ROOT_ON |
+ CLK_ROOT_SOURCE_SEL(4) |
+ CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV4));
+
+ /* disable iso */
+ reg32_write(0x303A00EC, 0x0000ffff); /* PGC_CPU_MAPPING */
+ reg32setbit(0x303A00F8, 5); /* PU_PGC_SW_PUP_REQ */
+
+ debug("DDRINFO: cfg clk\n");
+ dram_pll_init(MHZ(750));
+
+ /*
+ * release [0]ddr1_preset_n, [1]ddr1_core_reset_n,
+ * [2]ddr1_phy_reset, [3]ddr1_phy_pwrokin_n
+ */
+ reg32_write(SRC_DDRC_RCR_ADDR, 0x8F000006);
+
+ /*step2 Configure uMCTL2's registers */
+ debug("DDRINFO: ddrc config start\n");
+ lpddr4_cfg_umctl2(dram_timing->ddrc_cfg, dram_timing->ddrc_cfg_num);
+ debug("DDRINFO: ddrc config done\n");
+
+ /*
+ * step3 de-assert all reset
+ * RESET: <core_ddrc_rstn> DEASSERTED
+ * RESET: <aresetn> for Port 0 DEASSERT(0)ED
+ */
+ reg32_write(SRC_DDRC_RCR_ADDR, 0x8F000004);
+ reg32_write(SRC_DDRC_RCR_ADDR, 0x8F000000);
+
+ reg32_write(DDRC_DBG1(0), 0x00000000);
+ /* step4 */
+ /* [0]dis_auto_refresh=1 */
+ reg32_write(DDRC_RFSHCTL3(0), 0x00000011);
+
+ /* [8]--1: lpddr4_sr allowed; [5]--1: software entry to SR */
+ reg32_write(DDRC_PWRCTL(0), 0x000000a8);
+
+ do {
+ tmp = reg32_read(DDRC_STAT(0));
+ } while ((tmp & 0x33f) != 0x223);
+
+ reg32_write(DDRC_DDR_SS_GPR0, 0x01); /* LPDDR4 mode */
+
+ /* step5 */
+ reg32_write(DDRC_SWCTL(0), 0x00000000);
+
+ /* step6 */
+ tmp = reg32_read(DDRC_MSTR2(0));
+ if (tmp == 0x2)
+ reg32_write(DDRC_DFIMISC(0), 0x00000210);
+ else if (tmp == 0x1)
+ reg32_write(DDRC_DFIMISC(0), 0x00000110);
+ else
+ reg32_write(DDRC_DFIMISC(0), 0x00000010);
+
+ /* step7 [0]--1: disable quasi-dynamic programming */
+ reg32_write(DDRC_SWCTL(0), 0x00000001);
+
+ /* step8 Configure LPDDR4 PHY's registers */
+ debug("DDRINFO:ddrphy config start\n");
+ ddr_cfg_phy(dram_timing);
+ debug("DDRINFO: ddrphy config done\n");
+
+ /*
+ * step14 CalBusy.0 =1, indicates the calibrator is actively
+ * calibrating. Wait Calibrating done.
+ */
+ do {
+ tmp = reg32_read(DDRPHY_CalBusy(0));
+ } while ((tmp & 0x1));
+
+ debug("DDRINFO:ddrphy calibration done\n");
+
+ /* step15 [0]--0: to enable quasi-dynamic programming */
+ reg32_write(DDRC_SWCTL(0), 0x00000000);
+
+ /* step16 */
+ tmp = reg32_read(DDRC_MSTR2(0));
+ if (tmp == 0x2)
+ reg32_write(DDRC_DFIMISC(0), 0x00000230);
+ else if (tmp == 0x1)
+ reg32_write(DDRC_DFIMISC(0), 0x00000130);
+ else
+ reg32_write(DDRC_DFIMISC(0), 0x00000030);
+
+ /* step17 [0]--1: disable quasi-dynamic programming */
+ reg32_write(DDRC_SWCTL(0), 0x00000001);
+ /* step18 wait DFISTAT.dfi_init_complete to 1 */
+ do {
+ tmp = reg32_read(DDRC_DFISTAT(0));
+ } while ((tmp & 0x1) == 0x0);
+
+ /* step19 */
+ reg32_write(DDRC_SWCTL(0), 0x00000000);
+
+ /* step20~22 */
+ tmp = reg32_read(DDRC_MSTR2(0));
+ if (tmp == 0x2) {
+ reg32_write(DDRC_DFIMISC(0), 0x00000210);
+ /* set DFIMISC.dfi_init_complete_en again */
+ reg32_write(DDRC_DFIMISC(0), 0x00000211);
+ } else if (tmp == 0x1) {
+ reg32_write(DDRC_DFIMISC(0), 0x00000110);
+ /* set DFIMISC.dfi_init_complete_en again */
+ reg32_write(DDRC_DFIMISC(0), 0x00000111);
+ } else {
+ /* clear DFIMISC.dfi_init_complete_en */
+ reg32_write(DDRC_DFIMISC(0), 0x00000010);
+ /* set DFIMISC.dfi_init_complete_en again */
+ reg32_write(DDRC_DFIMISC(0), 0x00000011);
+ }
+
+ /* step23 [5]selfref_sw=0; */
+ reg32_write(DDRC_PWRCTL(0), 0x00000008);
+ /* step24 sw_done=1 */
+ reg32_write(DDRC_SWCTL(0), 0x00000001);
+
+ /* step25 wait SWSTAT.sw_done_ack to 1 */
+ do {
+ tmp = reg32_read(DDRC_SWSTAT(0));
+ } while ((tmp & 0x1) == 0x0);
+
+#ifdef DFI_BUG_WR
+ reg32_write(DDRC_DFIPHYMSTR(0), 0x00000001);
+#endif
+ /* wait STAT.operating_mode([1:0] for ddr3) to normal state */
+ do {
+ tmp = reg32_read(DDRC_STAT(0));
+ } while ((tmp & 0x3) != 0x1);
+
+ /* step26 */
+ reg32_write(DDRC_RFSHCTL3(0), 0x00000010);
+
+ /* enable port 0 */
+ reg32_write(DDRC_PCTRL_0(0), 0x00000001);
+ debug("DDRINFO: ddrmix config done\n");
+
+ /* save the dram timing config into memory */
+ dram_config_save(dram_timing, CONFIG_SAVED_DRAM_TIMING_BASE);
+}
[2] = GPIO3_BASE_ADDR,
#if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX51) || \
defined(CONFIG_MX53) || defined(CONFIG_MX6) || \
- defined(CONFIG_MX7) || defined(CONFIG_MX8M) || \
+ defined(CONFIG_MX7) || defined(CONFIG_IMX8M) || \
defined(CONFIG_ARCH_IMX8)
[3] = GPIO4_BASE_ADDR,
#endif
#if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_MX6) || \
- defined(CONFIG_MX7) || defined(CONFIG_MX8M) || \
+ defined(CONFIG_MX7) || defined(CONFIG_IMX8M) || \
defined(CONFIG_ARCH_IMX8)
[4] = GPIO5_BASE_ADDR,
-#if !(defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) || defined(CONFIG_MX8M))
+#if !(defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) || defined(CONFIG_IMX8M))
[5] = GPIO6_BASE_ADDR,
#endif
#endif
{ 2, (struct gpio_regs *)GPIO3_BASE_ADDR },
#if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX51) || \
defined(CONFIG_MX53) || defined(CONFIG_MX6) || \
- defined(CONFIG_MX8M) || defined(CONFIG_ARCH_IMX8)
+ defined(CONFIG_IMX8M) || defined(CONFIG_ARCH_IMX8)
{ 3, (struct gpio_regs *)GPIO4_BASE_ADDR },
#endif
#if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_MX6) || \
- defined(CONFIG_MX8M) || defined(CONFIG_ARCH_IMX8)
+ defined(CONFIG_IMX8M) || defined(CONFIG_ARCH_IMX8)
{ 4, (struct gpio_regs *)GPIO5_BASE_ADDR },
-#ifndef CONFIG_MX8M
+#ifndef CONFIG_IMX8M
{ 5, (struct gpio_regs *)GPIO6_BASE_ADDR },
#endif
#endif
{ "gpio_mxc", &mxc_plat[2] },
#if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX51) || \
defined(CONFIG_MX53) || defined(CONFIG_MX6) || \
- defined(CONFIG_MX8M) || defined(CONFIG_ARCH_IMX8)
+ defined(CONFIG_IMX8M) || defined(CONFIG_ARCH_IMX8)
{ "gpio_mxc", &mxc_plat[3] },
#endif
#if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_MX6) || \
- defined(CONFIG_MX8M) || defined(CONFIG_ARCH_IMX8)
+ defined(CONFIG_IMX8M) || defined(CONFIG_ARCH_IMX8)
{ "gpio_mxc", &mxc_plat[4] },
-#ifndef CONFIG_MX8M
+#ifndef CONFIG_IMX8M
{ "gpio_mxc", &mxc_plat[5] },
#endif
#endif
#define BM_OUT_STATUS_DED 0x00000400
#define BM_OUT_STATUS_LOCKED 0x00000800
#define BM_OUT_STATUS_PROGFAIL 0x00001000
-#elif defined(CONFIG_MX8M)
+#elif defined(CONFIG_IMX8M)
#define BM_CTRL_ADDR 0x000000ff
#else
#define BM_CTRL_ADDR 0x0000007f
#elif defined(CONFIG_MX7ULP)
#define FUSE_BANK_SIZE 0x80
#define FUSE_BANKS 31
-#elif defined(CONFIG_MX8M)
+#elif defined(CONFIG_IMX8M)
#define FUSE_BANK_SIZE 0x40
#define FUSE_BANKS 64
#else
u32 wr_unlock = write ? BV_CTRL_WR_UNLOCK_KEY : 0;
#ifdef CONFIG_MX7
u32 addr = bank;
-#elif defined CONFIG_MX8M
+#elif defined CONFIG_IMX8M
u32 addr = bank << 2 | word;
#else
u32 addr;
int timeout;
struct fsl_esdhc *regs = priv->esdhc_regs;
#if defined(CONFIG_FSL_LAYERSCAPE) || defined(CONFIG_S32V234) || \
- defined(CONFIG_IMX8) || defined(CONFIG_MX8M)
+ defined(CONFIG_IMX8) || defined(CONFIG_IMX8M)
dma_addr_t addr;
#endif
uint wml_value;
esdhc_clrsetbits32(®s->wml, WML_RD_WML_MASK, wml_value);
#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
#if defined(CONFIG_FSL_LAYERSCAPE) || defined(CONFIG_S32V234) || \
- defined(CONFIG_IMX8) || defined(CONFIG_MX8M)
+ defined(CONFIG_IMX8) || defined(CONFIG_IMX8M)
addr = virt_to_phys((void *)(data->dest));
if (upper_32_bits(addr))
printf("Error found for upper 32 bits\n");
wml_value << 16);
#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
#if defined(CONFIG_FSL_LAYERSCAPE) || defined(CONFIG_S32V234) || \
- defined(CONFIG_IMX8) || defined(CONFIG_MX8M)
+ defined(CONFIG_IMX8) || defined(CONFIG_IMX8M)
addr = virt_to_phys((void *)(data->src));
if (upper_32_bits(addr))
printf("Error found for upper 32 bits\n");
unsigned size = roundup(ARCH_DMA_MINALIGN,
data->blocks*data->blocksize);
#if defined(CONFIG_FSL_LAYERSCAPE) || defined(CONFIG_S32V234) || \
- defined(CONFIG_IMX8) || defined(CONFIG_MX8M)
+ defined(CONFIG_IMX8) || defined(CONFIG_IMX8M)
dma_addr_t addr;
addr = virt_to_phys((void *)(data->dest));
The driver supports a maximum 2k page size. The driver
currently does not support hardware ECC.
+if NAND_VF610_NFC
+
+config NAND_VF610_NFC_DT
+ bool "Support Vybrid's vf610 NAND controller as a DT device"
+ depends on OF_CONTROL && MTD
+ help
+ Enable the driver for Vybrid's vf610 NAND flash on platforms
+ using device tree.
+
choice
prompt "Hardware ECC strength"
depends on NAND_VF610_NFC
endchoice
+endif
+
config NAND_PXA3XX
bool "Support for NAND on PXA3xx and Armada 370/XP/38x"
select SYS_NAND_SELF_INIT
#define DENALI_INVALID_BANK -1
#define DENALI_NR_BANKS 4
-/*
- * The bus interface clock, clk_x, is phase aligned with the core clock. The
- * clk_x is an integral multiple N of the core clk. The value N is configured
- * at IP delivery time, and its available value is 4, 5, or 6. We need to align
- * to the largest value to make it work with any possible configuration.
- */
-#define DENALI_CLK_X_MULT 6
-
static inline struct denali_nand_info *mtd_to_denali(struct mtd_info *mtd)
{
return container_of(mtd_to_nand(mtd), struct denali_nand_info, nand);
}
iowrite32(DMA_ENABLE__FLAG, denali->reg + DMA_ENABLE);
+ /*
+ * The ->setup_dma() hook kicks DMA by using the data/command
+ * interface, which belongs to a different AXI port from the
+ * register interface. Read back the register to avoid a race.
+ */
+ ioread32(denali->reg + DMA_ENABLE);
denali_reset_irq(denali);
denali->setup_dma(denali, dma_addr, page, write);
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
const struct nand_sdr_timings *timings;
- unsigned long t_clk;
+ unsigned long t_x, mult_x;
int acc_clks, re_2_we, re_2_re, we_2_re, addr_2_data;
int rdwr_en_lo, rdwr_en_hi, rdwr_en_lo_hi, cs_setup;
int addr_2_data_mask;
return PTR_ERR(timings);
/* clk_x period in picoseconds */
- t_clk = DIV_ROUND_DOWN_ULL(1000000000000ULL, denali->clk_x_rate);
- if (!t_clk)
+ t_x = DIV_ROUND_DOWN_ULL(1000000000000ULL, denali->clk_x_rate);
+ if (!t_x)
+ return -EINVAL;
+
+ /*
+ * The bus interface clock, clk_x, is phase aligned with the core clock.
+ * The clk_x is an integral multiple N of the core clk. The value N is
+ * configured at IP delivery time, and its available value is 4, 5, 6.
+ */
+ mult_x = DIV_ROUND_CLOSEST_ULL(denali->clk_x_rate, denali->clk_rate);
+ if (mult_x < 4 || mult_x > 6)
return -EINVAL;
if (chipnr == NAND_DATA_IFACE_CHECK_ONLY)
return 0;
/* tREA -> ACC_CLKS */
- acc_clks = DIV_ROUND_UP(timings->tREA_max, t_clk);
+ acc_clks = DIV_ROUND_UP(timings->tREA_max, t_x);
acc_clks = min_t(int, acc_clks, ACC_CLKS__VALUE);
tmp = ioread32(denali->reg + ACC_CLKS);
iowrite32(tmp, denali->reg + ACC_CLKS);
/* tRWH -> RE_2_WE */
- re_2_we = DIV_ROUND_UP(timings->tRHW_min, t_clk);
+ re_2_we = DIV_ROUND_UP(timings->tRHW_min, t_x);
re_2_we = min_t(int, re_2_we, RE_2_WE__VALUE);
tmp = ioread32(denali->reg + RE_2_WE);
iowrite32(tmp, denali->reg + RE_2_WE);
/* tRHZ -> RE_2_RE */
- re_2_re = DIV_ROUND_UP(timings->tRHZ_max, t_clk);
+ re_2_re = DIV_ROUND_UP(timings->tRHZ_max, t_x);
re_2_re = min_t(int, re_2_re, RE_2_RE__VALUE);
tmp = ioread32(denali->reg + RE_2_RE);
* With WE_2_RE properly set, the Denali controller automatically takes
* care of the delay; the driver need not set NAND_WAIT_TCCS.
*/
- we_2_re = DIV_ROUND_UP(max(timings->tCCS_min, timings->tWHR_min),
- t_clk);
+ we_2_re = DIV_ROUND_UP(max(timings->tCCS_min, timings->tWHR_min), t_x);
we_2_re = min_t(int, we_2_re, TWHR2_AND_WE_2_RE__WE_2_RE);
tmp = ioread32(denali->reg + TWHR2_AND_WE_2_RE);
if (denali->revision < 0x0501)
addr_2_data_mask >>= 1;
- addr_2_data = DIV_ROUND_UP(timings->tADL_min, t_clk);
+ addr_2_data = DIV_ROUND_UP(timings->tADL_min, t_x);
addr_2_data = min_t(int, addr_2_data, addr_2_data_mask);
tmp = ioread32(denali->reg + TCWAW_AND_ADDR_2_DATA);
/* tREH, tWH -> RDWR_EN_HI_CNT */
rdwr_en_hi = DIV_ROUND_UP(max(timings->tREH_min, timings->tWH_min),
- t_clk);
+ t_x);
rdwr_en_hi = min_t(int, rdwr_en_hi, RDWR_EN_HI_CNT__VALUE);
tmp = ioread32(denali->reg + RDWR_EN_HI_CNT);
iowrite32(tmp, denali->reg + RDWR_EN_HI_CNT);
/* tRP, tWP -> RDWR_EN_LO_CNT */
- rdwr_en_lo = DIV_ROUND_UP(max(timings->tRP_min, timings->tWP_min),
- t_clk);
+ rdwr_en_lo = DIV_ROUND_UP(max(timings->tRP_min, timings->tWP_min), t_x);
rdwr_en_lo_hi = DIV_ROUND_UP(max(timings->tRC_min, timings->tWC_min),
- t_clk);
- rdwr_en_lo_hi = max(rdwr_en_lo_hi, DENALI_CLK_X_MULT);
+ t_x);
+ rdwr_en_lo_hi = max_t(int, rdwr_en_lo_hi, mult_x);
rdwr_en_lo = max(rdwr_en_lo, rdwr_en_lo_hi - rdwr_en_hi);
rdwr_en_lo = min_t(int, rdwr_en_lo, RDWR_EN_LO_CNT__VALUE);
iowrite32(tmp, denali->reg + RDWR_EN_LO_CNT);
/* tCS, tCEA -> CS_SETUP_CNT */
- cs_setup = max3((int)DIV_ROUND_UP(timings->tCS_min, t_clk) - rdwr_en_lo,
- (int)DIV_ROUND_UP(timings->tCEA_max, t_clk) - acc_clks,
+ cs_setup = max3((int)DIV_ROUND_UP(timings->tCS_min, t_x) - rdwr_en_lo,
+ (int)DIV_ROUND_UP(timings->tCEA_max, t_x) - acc_clks,
0);
cs_setup = min_t(int, cs_setup, CS_SETUP_CNT__VALUE);
struct denali_nand_info {
struct nand_chip nand;
+ unsigned long clk_rate; /* core clock rate */
unsigned long clk_x_rate; /* bus interface clock rate */
int active_bank; /* currently selected bank */
struct udevice *dev;
{
struct denali_nand_info *denali = dev_get_priv(dev);
const struct denali_dt_data *data;
- struct clk clk;
+ struct clk clk, clk_x, clk_ecc;
struct resource res;
int ret;
denali->host = devm_ioremap(dev, res.start, resource_size(&res));
- ret = clk_get_by_index(dev, 0, &clk);
+ ret = clk_get_by_name(dev, "nand", &clk);
+ if (ret)
+ ret = clk_get_by_index(dev, 0, &clk);
if (ret)
return ret;
+ ret = clk_get_by_name(dev, "nand_x", &clk_x);
+ if (ret)
+ clk_x.dev = NULL;
+
+ ret = clk_get_by_name(dev, "ecc", &clk_ecc);
+ if (ret)
+ clk_ecc.dev = NULL;
+
ret = clk_enable(&clk);
if (ret)
return ret;
- denali->clk_x_rate = clk_get_rate(&clk);
+ if (clk_x.dev) {
+ ret = clk_enable(&clk_x);
+ if (ret)
+ return ret;
+ }
+
+ if (clk_ecc.dev) {
+ ret = clk_enable(&clk_ecc);
+ if (ret)
+ return ret;
+ }
+
+ if (clk_x.dev) {
+ denali->clk_rate = clk_get_rate(&clk);
+ denali->clk_x_rate = clk_get_rate(&clk_x);
+ } else {
+ /*
+ * Hardcode the clock rates for the backward compatibility.
+ * This works for both SOCFPGA and UniPhier.
+ */
+ dev_notice(dev,
+ "necessary clock is missing. default clock rates are used.\n");
+ denali->clk_rate = 50000000;
+ denali->clk_x_rate = 200000000;
+ }
return denali_init(denali);
}
{"SDTNRGAMA 64G 3.3V 8-bit",
{ .id = {0x45, 0xde, 0x94, 0x93, 0x76, 0x50} },
SZ_16K, SZ_8K, SZ_4M, 0, 6, 1280, NAND_ECC_INFO(40, SZ_1K) },
+ {"H27UBG8T2BTR-BC 32G 3.3V 8-bit",
+ { .id = {0xad, 0xd7, 0x94, 0xda, 0x74, 0xc3} },
+ SZ_8K, SZ_4K, SZ_2M, NAND_NEED_SCRAMBLING, 6, 640,
+ NAND_ECC_INFO(40, SZ_1K), 0 },
{"H27UCG8T2ATR-BC 64G 3.3V 8-bit",
{ .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} },
SZ_8K, SZ_8K, SZ_2M, NAND_NEED_SCRAMBLING, 6, 640,
#include <nand.h>
#include <errno.h>
#include <asm/io.h>
+#if CONFIG_NAND_VF610_NFC_DT
+#include <dm.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#endif
/* Register Offsets */
#define NFC_FLASH_CMD1 0x3F00
.flash_bbt = 1,
};
- nfc = malloc(sizeof(*nfc));
+ nfc = calloc(1, sizeof(*nfc));
if (!nfc) {
printf(KERN_ERR "%s: Memory exhausted!\n", __func__);
return -ENOMEM;
return err;
}
+#if CONFIG_NAND_VF610_NFC_DT
+static const struct udevice_id vf610_nfc_dt_ids[] = {
+ {
+ .compatible = "fsl,vf610-nfc",
+ },
+ { /* sentinel */ }
+};
+
+static int vf610_nfc_dt_probe(struct udevice *dev)
+{
+ struct resource res;
+ int ret;
+
+ ret = dev_read_resource(dev, 0, &res);
+ if (ret)
+ return ret;
+
+ return vf610_nfc_nand_init(0, devm_ioremap(dev, res.start,
+ resource_size(&res)));
+}
+
+U_BOOT_DRIVER(vf610_nfc_dt) = {
+ .name = "vf610-nfc-dt",
+ .id = UCLASS_MTD,
+ .of_match = vf610_nfc_dt_ids,
+ .probe = vf610_nfc_dt_probe,
+};
+
+void board_nand_init(void)
+{
+ struct udevice *dev;
+ int ret;
+
+ ret = uclass_get_device_by_driver(UCLASS_MTD,
+ DM_GET_DRIVER(vf610_nfc_dt),
+ &dev);
+ if (ret && ret != -ENODEV)
+ pr_err("Failed to initialize NAND controller. (error %d)\n",
+ ret);
+}
+#else
void board_nand_init(void)
{
int err = vf610_nfc_nand_init(0, (void __iomem *)CONFIG_SYS_NAND_BASE);
if (err)
printf("VF610 NAND init failed (err %d)\n", err);
}
+#endif /* CONFIG_NAND_VF610_NFC_DT */
writel(0x00000000, &fec->eth->gaddr2);
/* Do not access reserved register */
- if (!is_mx6ul() && !is_mx6ull() && !is_mx8m()) {
+ if (!is_mx6ul() && !is_mx6ull() && !is_imx8m()) {
/* clear MIB RAM */
for (i = mib_ptr; i <= mib_ptr + 0xfc; i += 4)
writel(0, i);
the GPIO definitions and pin control functions for each available
multiplex function.
+config PINCTRL_ROCKCHIP_RK3399_FULL
+ bool "Rockchip rk3399 pin control driver (full)"
+ depends on PINCTRL_FULL && PINCTRL_ROCKCHIP_RK3399
+ help
+ Support full pin multiplexing control on Rockchip rk3399 SoCs.
+
+ This enables the full pinctrl driver for the RK3399.
+ Contrary to the non-full pinctrl driver, this will evaluate
+ the board DTB to get the pinctrl settings.
+
config PINCTRL_ROCKCHIP_RV1108
bool "Rockchip rv1108 pin control driver"
depends on DM
is different from the linux one, this is a simple implementation,
only parses the 'fsl,pins' property and configures related
registers.
+
+config PINCTRL_VYBRID
+ bool "Vybrid (vf610) pinctrl driver"
+ depends on ARCH_VF610 && PINCTRL_FULL
+ select DEVRES
+ select PINCTRL_IMX
+ help
+ Say Y here to enable the Vybrid (vf610) pinctrl driver
+
+ This provides a simple pinctrl driver for Vybrid SoC familiy,
+ vf610. This feature depends on device tree
+ configuration. This driver is different from the linux one,
+ this is a simple implementation, only parses the 'fsl,pins'
+ property and configure related registers.
obj-$(CONFIG_PINCTRL_IMX7ULP) += pinctrl-imx7ulp.o
obj-$(CONFIG_PINCTRL_IMX_SCU) += pinctrl-scu.o
obj-$(CONFIG_PINCTRL_IMX8) += pinctrl-imx8.o
+obj-$(CONFIG_PINCTRL_VYBRID) += pinctrl-vf610.o
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 DENX Software Engineering
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <dm/pinctrl.h>
+
+#include "pinctrl-imx.h"
+
+static struct imx_pinctrl_soc_info vf610_pinctrl_soc_info = {
+ .flags = SHARE_MUX_CONF_REG | ZERO_OFFSET_VALID,
+};
+
+static int vf610_pinctrl_probe(struct udevice *dev)
+{
+ struct imx_pinctrl_soc_info *info =
+ (struct imx_pinctrl_soc_info *)dev_get_driver_data(dev);
+
+ return imx_pinctrl_probe(dev, info);
+}
+
+static const struct udevice_id vf610_pinctrl_match[] = {
+ { .compatible = "fsl,vf610-iomuxc",
+ .data = (ulong)&vf610_pinctrl_soc_info },
+ { /* sentinel */ }
+};
+
+U_BOOT_DRIVER(vf610_pinctrl) = {
+ .name = "vf610-pinctrl",
+ .id = UCLASS_PINCTRL,
+ .of_match = of_match_ptr(vf610_pinctrl_match),
+ .probe = vf610_pinctrl_probe,
+ .remove = imx_pinctrl_remove,
+ .priv_auto_alloc_size = sizeof(struct imx_pinctrl_priv),
+ .ops = &imx_pinctrl_ops,
+ .flags = DM_FLAG_PRE_RELOC,
+};
return flags;
}
+/*
+ * TODO: this function is temporary for v2019.01.
+ * It should be renamed to pinctrl_decode_pin_config(),
+ * the original pinctrl_decode_pin_config() function should
+ * be removed and all callers of the original function should
+ * be migrated to use the new one.
+ */
+int pinctrl_decode_pin_config_dm(struct udevice *dev)
+{
+ int pinconfig = 0;
+
+ if (dev->uclass->uc_drv->id != UCLASS_PINCONFIG)
+ return -EINVAL;
+
+ if (dev_read_bool(dev, "bias-pull-up"))
+ pinconfig |= 1 << PIN_CONFIG_BIAS_PULL_UP;
+ else if (dev_read_bool(dev, "bias-pull-down"))
+ pinconfig |= 1 << PIN_CONFIG_BIAS_PULL_DOWN;
+
+ return pinconfig;
+}
+
#if CONFIG_IS_ENABLED(PINCTRL_FULL)
/**
* pinctrl_config_one() - apply pinctrl settings for a single node
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ * (C) 2018 Theobroma Systems Design und Consulting GmbH
*/
#include <common.h>
#include <asm/arch/clock.h>
#include <dm/pinctrl.h>
+#if CONFIG_IS_ENABLED(PINCTRL_ROCKCHIP_RK3399_FULL)
+static const u32 RK_GRF_P_PULLUP = 1;
+static const u32 RK_GRF_P_PULLDOWN = 2;
+#endif /* PINCTRL_ROCKCHIP_RK3399_FULL */
+
struct rk3399_pinctrl_priv {
struct rk3399_grf_regs *grf;
struct rk3399_pmugrf_regs *pmugrf;
+ struct rockchip_pin_bank *banks;
+};
+
+#if CONFIG_IS_ENABLED(PINCTRL_ROCKCHIP_RK3399_FULL)
+/* Location of pinctrl/pinconf registers. */
+enum rk_grf_location {
+ RK_GRF,
+ RK_PMUGRF,
+};
+
+/**
+ * @nr_pins: number of pins in this bank
+ * @grf_location: location of pinctrl/pinconf registers
+ * @bank_num: number of the bank, to account for holes
+ * @iomux: array describing the 4 iomux sources of the bank
+ */
+struct rockchip_pin_bank {
+ u8 nr_pins;
+ enum rk_grf_location grf_location;
+ size_t iomux_offset;
+ size_t pupd_offset;
+};
+
+#define PIN_BANK(pins, grf, iomux, pupd) \
+ { \
+ .nr_pins = pins, \
+ .grf_location = grf, \
+ .iomux_offset = iomux, \
+ .pupd_offset = pupd, \
+ }
+
+static struct rockchip_pin_bank rk3399_pin_banks[] = {
+ PIN_BANK(16, RK_PMUGRF,
+ offsetof(struct rk3399_pmugrf_regs, gpio0a_iomux),
+ offsetof(struct rk3399_pmugrf_regs, gpio0_p)),
+ PIN_BANK(32, RK_PMUGRF,
+ offsetof(struct rk3399_pmugrf_regs, gpio1a_iomux),
+ offsetof(struct rk3399_pmugrf_regs, gpio1_p)),
+ PIN_BANK(32, RK_GRF,
+ offsetof(struct rk3399_grf_regs, gpio2a_iomux),
+ offsetof(struct rk3399_grf_regs, gpio2_p)),
+ PIN_BANK(32, RK_GRF,
+ offsetof(struct rk3399_grf_regs, gpio3a_iomux),
+ offsetof(struct rk3399_grf_regs, gpio3_p)),
+ PIN_BANK(32, RK_GRF,
+ offsetof(struct rk3399_grf_regs, gpio4a_iomux),
+ offsetof(struct rk3399_grf_regs, gpio4_p)),
};
+static void rk_pinctrl_get_info(uintptr_t base, u32 index, uintptr_t *addr,
+ u32 *shift, u32 *mask)
+{
+ /*
+ * In general we four subsequent 32-bit configuration registers
+ * per bank (e.g. GPIO2A_P, GPIO2B_P, GPIO2C_P, GPIO2D_P).
+ * The configuration for each pin has two bits.
+ *
+ * @base...contains the address to the first register.
+ * @index...defines the pin within the bank (0..31).
+ * @addr...will be the address of the actual register to use
+ * @shift...will be the bit position in the configuration register
+ * @mask...will be the (unshifted) mask
+ */
+
+ const u32 pins_per_register = 8;
+ const u32 config_bits_per_pin = 2;
+
+ /* Get the address of the configuration register. */
+ *addr = base + (index / pins_per_register) * sizeof(u32);
+
+ /* Get the bit offset within the configuration register. */
+ *shift = (index & (pins_per_register - 1)) * config_bits_per_pin;
+
+ /* Get the (unshifted) mask for the configuration pins. */
+ *mask = ((1 << config_bits_per_pin) - 1);
+
+ pr_debug("%s: addr=0x%lx, mask=0x%x, shift=0x%x\n",
+ __func__, *addr, *mask, *shift);
+}
+
+static void rk3399_pinctrl_set_pin_iomux(uintptr_t grf_addr,
+ struct rockchip_pin_bank *bank,
+ u32 index, u32 muxval)
+{
+ uintptr_t iomux_base, addr;
+ u32 shift, mask;
+
+ iomux_base = grf_addr + bank->iomux_offset;
+ rk_pinctrl_get_info(iomux_base, index, &addr, &shift, &mask);
+
+ /* Set pinmux register */
+ rk_clrsetreg(addr, mask << shift, muxval << shift);
+}
+
+static void rk3399_pinctrl_set_pin_pupd(uintptr_t grf_addr,
+ struct rockchip_pin_bank *bank,
+ u32 index, int pinconfig)
+{
+ uintptr_t pupd_base, addr;
+ u32 shift, mask, pupdval;
+
+ /* Fast path in case there's nothing to do. */
+ if (!pinconfig)
+ return;
+
+ if (pinconfig & (1 << PIN_CONFIG_BIAS_PULL_UP))
+ pupdval = RK_GRF_P_PULLUP;
+ else if (pinconfig & (1 << PIN_CONFIG_BIAS_PULL_DOWN))
+ pupdval = RK_GRF_P_PULLDOWN;
+ else
+ /* Flag not supported. */
+ pr_warn("%s: Unsupported pinconfig flag: 0x%x\n", __func__,
+ pinconfig);
+ return;
+
+ pupd_base = grf_addr + (uintptr_t)bank->pupd_offset;
+ rk_pinctrl_get_info(pupd_base, index, &addr, &shift, &mask);
+
+ /* Set pull-up/pull-down regisrer */
+ rk_clrsetreg(addr, mask << shift, pupdval << shift);
+}
+
+static int rk3399_pinctrl_set_pin(struct udevice *dev, u32 banknum, u32 index,
+ u32 muxval, int pinconfig)
+{
+ struct rk3399_pinctrl_priv *priv = dev_get_priv(dev);
+ struct rockchip_pin_bank *bank = &priv->banks[banknum];
+ uintptr_t grf_addr;
+
+ pr_debug("%s: 0x%x 0x%x 0x%x 0x%x\n", __func__, banknum, index, muxval,
+ pinconfig);
+
+ if (bank->grf_location == RK_GRF)
+ grf_addr = (uintptr_t)priv->grf;
+ else if (bank->grf_location == RK_PMUGRF)
+ grf_addr = (uintptr_t)priv->pmugrf;
+ else
+ return -EINVAL;
+
+ rk3399_pinctrl_set_pin_iomux(grf_addr, bank, index, muxval);
+
+ rk3399_pinctrl_set_pin_pupd(grf_addr, bank, index, pinconfig);
+ return 0;
+}
+
+static int rk3399_pinctrl_set_state(struct udevice *dev, struct udevice *config)
+{
+ /*
+ * The order of the fields in this struct must match the order of
+ * the fields in the "rockchip,pins" property.
+ */
+ struct rk_pin {
+ u32 banknum;
+ u32 index;
+ u32 muxval;
+ u32 phandle;
+ } __packed;
+
+ u32 *fields = NULL;
+ const int fields_per_pin = 4;
+ int num_fields, num_pins;
+ int ret;
+ int size;
+ int i;
+ struct rk_pin *pin;
+
+ pr_debug("%s: %s\n", __func__, config->name);
+
+ size = dev_read_size(config, "rockchip,pins");
+ if (size < 0)
+ return -EINVAL;
+
+ num_fields = size / sizeof(u32);
+ num_pins = num_fields / fields_per_pin;
+
+ if (num_fields * sizeof(u32) != size ||
+ num_pins * fields_per_pin != num_fields) {
+ pr_warn("Invalid number of rockchip,pins fields.\n");
+ return -EINVAL;
+ }
+
+ fields = calloc(num_fields, sizeof(u32));
+ if (!fields)
+ return -ENOMEM;
+
+ ret = dev_read_u32_array(config, "rockchip,pins", fields, num_fields);
+ if (ret) {
+ pr_warn("%s: Failed to read rockchip,pins fields.\n",
+ config->name);
+ goto end;
+ }
+
+ pin = (struct rk_pin *)fields;
+ for (i = 0; i < num_pins; i++, pin++) {
+ struct udevice *dev_pinconfig;
+ int pinconfig;
+
+ ret = uclass_get_device_by_phandle_id(UCLASS_PINCONFIG,
+ pin->phandle,
+ &dev_pinconfig);
+ if (ret) {
+ pr_debug("Could not get pinconfig device\n");
+ goto end;
+ }
+
+ pinconfig = pinctrl_decode_pin_config_dm(dev_pinconfig);
+ if (pinconfig < 0) {
+ pr_warn("Could not parse pinconfig\n");
+ goto end;
+ }
+
+ ret = rk3399_pinctrl_set_pin(dev, pin->banknum, pin->index,
+ pin->muxval, pinconfig);
+ if (ret) {
+ pr_warn("Could not set pinctrl settings\n");
+ goto end;
+ }
+ }
+
+end:
+ free(fields);
+ return ret;
+}
+
+#endif /* PINCTRL_ROCKCHIP_RK3399_FULL */
+
static void pinctrl_rk3399_pwm_config(struct rk3399_grf_regs *grf,
struct rk3399_pmugrf_regs *pmugrf, int pwm_id)
{
}
static struct pinctrl_ops rk3399_pinctrl_ops = {
+#if CONFIG_IS_ENABLED(PINCTRL_ROCKCHIP_RK3399_FULL)
+ .set_state = rk3399_pinctrl_set_state,
+#endif
.set_state_simple = rk3399_pinctrl_set_state_simple,
.request = rk3399_pinctrl_request,
.get_periph_id = rk3399_pinctrl_get_periph_id,
priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
priv->pmugrf = syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF);
debug("%s: grf=%p, pmugrf=%p\n", __func__, priv->grf, priv->pmugrf);
+#if CONFIG_IS_ENABLED(PINCTRL_ROCKCHIP_RK3399_FULL)
+ priv->banks = rk3399_pin_banks;
+#endif /* PINCTRL_ROCKCHIP_RK3399_FULL */
return ret;
}
This driver is controlled by a device tree node
which includes voltage limits.
+config SPL_REGULATOR_PWM
+ bool "Enable Driver for PWM regulators in SPL"
+ depends on REGULATOR_PWM
+ help
+ This config enables implementation of driver-model regulator uclass
+ features for PWM regulators in SPL.
+
config DM_REGULATOR_MAX77686
bool "Enable Driver Model for REGULATOR MAX77686"
depends on DM_REGULATOR && DM_PMIC_MAX77686
obj-$(CONFIG_REGULATOR_AS3722) += as3722_regulator.o
obj-$(CONFIG_DM_REGULATOR_MAX77686) += max77686.o
obj-$(CONFIG_$(SPL_)DM_PMIC_PFUZE100) += pfuze100.o
-obj-$(CONFIG_REGULATOR_PWM) += pwm_regulator.o
+obj-$(CONFIG_$(SPL_)REGULATOR_PWM) += pwm_regulator.o
obj-$(CONFIG_$(SPL_)DM_REGULATOR_FAN53555) += fan53555.o
obj-$(CONFIG_$(SPL_)DM_REGULATOR_FIXED) += fixed.o
obj-$(CONFIG_$(SPL_)DM_REGULATOR_GPIO) += gpio-regulator.o
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
/*
* (C) Copyright 2017 Rockchip Electronics Co., Ltd.
*/
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
/*
* (C) Copyright 2015 Google, Inc
* Copyright 2014 Rockchip Inc.
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
/*
* (C) Copyright 2017 Rockchip Electronics Co., Ltd
*/
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
/*
* (C) Copyright 2015 Google, Inc
* Copyright 2014 Rockchip Inc.
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
/*
* (C) Copyright 2017 Rockchip Electronics Co., Ltd.
*/
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
/*
* (C) Copyright 2016-2017 Rockchip Inc.
*
while (len--) {
byte = readb(&priv->regs->rxdata);
- *priv->rx_buf++ = byte;
+ if (priv->rx_buf)
+ *priv->rx_buf++ = byte;
}
}
help
Emulate a 1-wire bus using a GPIO.
+config W1_MXC
+ bool "Enable 1-wire controller on i.MX processors"
+ default no
+ depends on ARCH_MX25 || ARCH_MX31 || ARCH_MX5
+ help
+ Support the one wire controller found in some members of the NXP
+ i.MX SoC family.
+ There are currently two silicon variants:
+ V1: i.MX21, i.MX27, i.MX31, i.MX51
+ V2: i.MX25, i.MX35, i.MX50, i.MX53
+ Newer i.MX SoCs such as the i.MX6 do not have one wire controllers.
+
+ The driver supports both silicon variants.
+
endif
endmenu
obj-$(CONFIG_W1) += w1-uclass.o
obj-$(CONFIG_W1_GPIO) += w1-gpio.o
+obj-$(CONFIG_W1_MXC) += mxc_w1.o
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for one wire controller in some i.MX Socs
+ *
+ * There are currently two silicon variants:
+ * V1: i.MX21, i.MX27, i.MX31, i.MX51
+ * V2: i.MX25, i.MX35, i.MX50, i.MX53
+ * Newer i.MX SoCs such as the i.MX6 do not have one wire controllers.
+ *
+ * The V1 controller only supports single bit operations.
+ * The V2 controller is backwards compatible on the register level but adds
+ * byte size operations and a "search ROM accelerator mode"
+ *
+ * This driver does not currently support the search ROM accelerator
+ *
+ * Copyright (c) 2018 Flowbird
+ * Martin Fuzzey <martin.fuzzey@flowbird.group>
+ */
+
+#include <asm/arch/clock.h>
+#include <common.h>
+#include <dm.h>
+#include <linux/io.h>
+#include <w1.h>
+
+struct mxc_w1_regs {
+ u16 control;
+#define MXC_W1_CONTROL_RPP BIT(7)
+#define MXC_W1_CONTROL_PST BIT(6)
+#define MXC_W1_CONTROL_WR(x) BIT(5 - (x))
+#define MXC_W1_CONTROL_RDST BIT(3)
+
+ u16 time_divider;
+ u16 reset;
+
+ /* Registers below on V2 silicon only */
+ u16 command;
+ u16 tx_rx;
+ u16 interrupt;
+#define MXC_W1_INTERRUPT_TBE BIT(2)
+#define MXC_W1_INTERRUPT_TSRE BIT(3)
+#define MXC_W1_INTERRUPT_RBF BIT(4)
+#define MXC_W1_INTERRUPT_RSRF BIT(5)
+
+ u16 interrupt_en;
+};
+
+struct mxc_w1_pdata {
+ struct mxc_w1_regs *regs;
+};
+
+/*
+ * this is the low level routine to read/write a bit on the One Wire
+ * interface on the hardware. It does write 0 if parameter bit is set
+ * to 0, otherwise a write 1/read.
+ */
+static u8 mxc_w1_touch_bit(struct mxc_w1_pdata *pdata, u8 bit)
+{
+ u16 *ctrl_addr = &pdata->regs->control;
+ u16 mask = MXC_W1_CONTROL_WR(bit);
+ unsigned int timeout_cnt = 400; /* Takes max. 120us according to
+ * datasheet.
+ */
+
+ writew(mask, ctrl_addr);
+
+ while (timeout_cnt--) {
+ if (!(readw(ctrl_addr) & mask))
+ break;
+
+ udelay(1);
+ }
+
+ return (readw(ctrl_addr) & MXC_W1_CONTROL_RDST) ? 1 : 0;
+}
+
+static u8 mxc_w1_read_byte(struct udevice *dev)
+{
+ struct mxc_w1_pdata *pdata = dev_get_platdata(dev);
+ struct mxc_w1_regs *regs = pdata->regs;
+ u16 status;
+
+ if (dev_get_driver_data(dev) < 2) {
+ int i;
+ u8 ret = 0;
+
+ for (i = 0; i < 8; i++)
+ ret |= (mxc_w1_touch_bit(pdata, 1) << i);
+
+ return ret;
+ }
+
+ readw(®s->tx_rx);
+ writew(0xFF, ®s->tx_rx);
+
+ do {
+ udelay(1); /* Without this bytes are sometimes duplicated... */
+ status = readw(®s->interrupt);
+ } while (!(status & MXC_W1_INTERRUPT_RBF));
+
+ return (u8)readw(®s->tx_rx);
+}
+
+static void mxc_w1_write_byte(struct udevice *dev, u8 byte)
+{
+ struct mxc_w1_pdata *pdata = dev_get_platdata(dev);
+ struct mxc_w1_regs *regs = pdata->regs;
+ u16 status;
+
+ if (dev_get_driver_data(dev) < 2) {
+ int i;
+
+ for (i = 0; i < 8; i++)
+ mxc_w1_touch_bit(pdata, (byte >> i) & 0x1);
+
+ return;
+ }
+
+ readw(®s->tx_rx);
+ writew(byte, ®s->tx_rx);
+
+ do {
+ udelay(1);
+ status = readw(®s->interrupt);
+ } while (!(status & MXC_W1_INTERRUPT_TSRE));
+}
+
+static bool mxc_w1_reset(struct udevice *dev)
+{
+ struct mxc_w1_pdata *pdata = dev_get_platdata(dev);
+ u16 reg_val;
+
+ writew(MXC_W1_CONTROL_RPP, &pdata->regs->control);
+
+ do {
+ reg_val = readw(&pdata->regs->control);
+ } while (reg_val & MXC_W1_CONTROL_RPP);
+
+ return !(reg_val & MXC_W1_CONTROL_PST);
+}
+
+static u8 mxc_w1_triplet(struct udevice *dev, bool bdir)
+{
+ struct mxc_w1_pdata *pdata = dev_get_platdata(dev);
+ u8 id_bit = mxc_w1_touch_bit(pdata, 1);
+ u8 comp_bit = mxc_w1_touch_bit(pdata, 1);
+ u8 retval;
+
+ if (id_bit && comp_bit)
+ return 0x03; /* error */
+
+ if (!id_bit && !comp_bit) {
+ /* Both bits are valid, take the direction given */
+ retval = bdir ? 0x04 : 0;
+ } else {
+ /* Only one bit is valid, take that direction */
+ bdir = id_bit;
+ retval = id_bit ? 0x05 : 0x02;
+ }
+
+ mxc_w1_touch_bit(pdata, bdir);
+
+ return retval;
+}
+
+static int mxc_w1_ofdata_to_platdata(struct udevice *dev)
+{
+ struct mxc_w1_pdata *pdata = dev_get_platdata(dev);
+ fdt_addr_t addr;
+
+ addr = devfdt_get_addr(dev);
+ if (addr == FDT_ADDR_T_NONE)
+ return -EINVAL;
+
+ pdata->regs = (struct mxc_w1_regs *)addr;
+
+ return 0;
+};
+
+static int mxc_w1_probe(struct udevice *dev)
+{
+ struct mxc_w1_pdata *pdata = dev_get_platdata(dev);
+ unsigned int clkrate = mxc_get_clock(MXC_IPG_PERCLK);
+ unsigned int clkdiv;
+
+ if (clkrate < 10000000) {
+ dev_err(dev, "input clock frequency (%u Hz) too low\n",
+ clkrate);
+ return -EINVAL;
+ }
+
+ clkdiv = clkrate / 1000000;
+ clkrate /= clkdiv;
+ if (clkrate < 980000 || clkrate > 1020000) {
+ dev_err(dev, "Incorrect time base frequency %u Hz\n", clkrate);
+ return -EINVAL;
+ }
+
+ writew(clkdiv - 1, &pdata->regs->time_divider);
+
+ return 0;
+}
+
+static const struct w1_ops mxc_w1_ops = {
+ .read_byte = mxc_w1_read_byte,
+ .reset = mxc_w1_reset,
+ .triplet = mxc_w1_triplet,
+ .write_byte = mxc_w1_write_byte,
+};
+
+static const struct udevice_id mxc_w1_id[] = {
+ { .compatible = "fsl,imx21-owire", .data = 1 },
+ { .compatible = "fsl,imx27-owire", .data = 1 },
+ { .compatible = "fsl,imx31-owire", .data = 1 },
+ { .compatible = "fsl,imx51-owire", .data = 1 },
+
+ { .compatible = "fsl,imx25-owire", .data = 2 },
+ { .compatible = "fsl,imx35-owire", .data = 2 },
+ { .compatible = "fsl,imx50-owire", .data = 2 },
+ { .compatible = "fsl,imx53-owire", .data = 2 },
+ { },
+};
+
+U_BOOT_DRIVER(mxc_w1_drv) = {
+ .id = UCLASS_W1,
+ .name = "mxc_w1_drv",
+ .of_match = mxc_w1_id,
+ .ofdata_to_platdata = mxc_w1_ofdata_to_platdata,
+ .ops = &mxc_w1_ops,
+ .platdata_auto_alloc_size = sizeof(struct mxc_w1_pdata),
+ .probe = mxc_w1_probe,
+};
config HW_WATCHDOG
bool
+config WATCHDOG_RESET_DISABLE
+ bool "Disable reset watchdog"
+ help
+ Disable reset watchdog, which can let WATCHDOG_RESET invalid, so
+ that the watchdog will not be fed in u-boot.
+
config BCM2835_WDT
bool "Enable BCM2835/2836 watchdog driver"
select HW_WATCHDOG
obj-$(CONFIG_FTWDT010_WATCHDOG) += ftwdt010_wdt.o
ifneq (,$(filter $(SOC), mx25 mx31 mx35 mx5 mx6 mx7 vf610))
obj-y += imx_watchdog.o
+else
+obj-$(CONFIG_IMX_WATCHDOG) += imx_watchdog.o
endif
obj-$(CONFIG_S5P) += s5p_wdt.o
obj-$(CONFIG_XILINX_TB_WATCHDOG) += xilinx_tb_wdt.o
#include <asm/io.h>
#include <watchdog.h>
#include <asm/arch/imx-regs.h>
+#ifdef CONFIG_FSL_LSCH2
+#include <asm/arch/immap_lsch2.h>
+#endif
#include <fsl_wdog.h>
#ifdef CONFIG_IMX_WATCHDOG
void hw_watchdog_reset(void)
{
+#ifndef CONFIG_WATCHDOG_RESET_DISABLE
struct watchdog_regs *wdog = (struct watchdog_regs *)WDOG1_BASE_ADDR;
writew(0x5555, &wdog->wsr);
writew(0xaaaa, &wdog->wsr);
+#endif /* CONFIG_WATCHDOG_RESET_DISABLE*/
}
void hw_watchdog_init(void)
#define CONFIG_WATCHDOG_TIMEOUT_MSECS 128000
#endif
timeout = (CONFIG_WATCHDOG_TIMEOUT_MSECS / 500) - 1;
+#ifdef CONFIG_FSL_LSCH2
+ writew((WCR_WDA | WCR_SRS | WCR_WDE) << 8 | timeout, &wdog->wcr);
+#else
writew(WCR_WDZST | WCR_WDBG | WCR_WDE | WCR_WDT | WCR_SRS |
WCR_WDA | SET_WCR_WT(timeout), &wdog->wcr);
+#endif /* CONFIG_FSL_LSCH2*/
hw_watchdog_reset();
}
#endif
}
swap_file_header(&header, fileHeader);
- if (header.offset < sizeof(struct cbfs_fileheader) ||
- header.offset > header.len) {
+ if (header.offset < sizeof(struct cbfs_fileheader)) {
file_cbfs_result = CBFS_BAD_FILE;
return -1;
}
start_of_rom = (u8 *)(end_of_rom + 1 - cbfs_header.rom_size);
- file_cbfs_fill_cache(start_of_rom + cbfs_header.offset,
- cbfs_header.rom_size, cbfs_header.align);
+ file_cbfs_fill_cache(start_of_rom, cbfs_header.rom_size,
+ cbfs_header.align);
if (file_cbfs_result == CBFS_SUCCESS)
initialized = 1;
}
bootm_headers_t *images);
extern boot_os_fn do_bootm_linux;
+extern boot_os_fn do_bootm_vxworks;
+
int do_bootelf(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
void lynxkdi_boot(image_header_t *hdr);
};
enum cbfs_filetype {
+ CBFS_TYPE_BOOTBLOCK = 0x01,
+ CBFS_TYPE_CBFSHEADER = 0x02,
CBFS_TYPE_STAGE = 0x10,
CBFS_TYPE_PAYLOAD = 0x20,
+ CBFS_TYPE_FIT = 0x21,
CBFS_TYPE_OPTIONROM = 0x30,
CBFS_TYPE_BOOTSPLASH = 0x40,
CBFS_TYPE_RAW = 0x50,
CBFS_TYPE_VSA = 0x51,
CBFS_TYPE_MBI = 0x52,
CBFS_TYPE_MICROCODE = 0x53,
- CBFS_COMPONENT_CMOS_DEFAULT = 0xaa,
- CBFS_COMPONENT_CMOS_LAYOUT = 0x01aa
+ CBFS_TYPE_FSP = 0x60,
+ CBFS_TYPE_MRC = 0x61,
+ CBFS_TYPE_MMA = 0x62,
+ CBFS_TYPE_EFI = 0x63,
+ CBFS_TYPE_STRUCT = 0x70,
+ CBFS_TYPE_CMOS_DEFAULT = 0xaa,
+ CBFS_TYPE_SPD = 0xab,
+ CBFS_TYPE_MRC_CACHE = 0xac,
+ CBFS_TYPE_CMOS_LAYOUT = 0x01aa
};
struct cbfs_header {
#include <asm/ibmpc.h>
-/* ACPI */
-
-/* Boot */
-#define CONFIG_BOOTCOMMAND "run bootcmd"
-
-/* DISK Partition support */
-
/* Miscellaneous configurable options */
#define CONFIG_SYS_CBSIZE 2048
#define CONFIG_ENV_OFFSET_REDUND (6 * 1024 * 1024)
#define CONFIG_SUPPORT_EMMC_BOOT
-/* PCI */
-#define CONFIG_CMD_PCI
-
/* RTC */
#define CONFIG_SYS_ISA_IO_BASE_ADDRESS 0
#include "mx6_common.h"
+#ifdef CONFIG_SPL
+#include "imx6_spl.h"
+/* RiOTboard */
+#define CONFIG_SYS_SPL_ARGS_ADDR 0x13000000
+#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage"
+#define CONFIG_SPL_FS_LOAD_ARGS_NAME "imx6dl-riotboard.dtb"
+
+#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0 /* offset 69KB */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0 /* offset 69KB */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0 /* offset 69KB */
+
+#endif
+
/* 256M RAM (minimum), 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
* 1M script, 1M pxe and the ramdisk at the end */
#define MEM_LAYOUT_ENV_SETTINGS \
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ */
+
+#ifndef __IMX8M_EVK_H
+#define __IMX8M_EVK_H
+
+#include <linux/sizes.h>
+#include <asm/arch/imx-regs.h>
+
+#ifdef CONFIG_SECURE_BOOT
+#define CONFIG_CSF_SIZE 0x2000 /* 8K region */
+#endif
+
+#define CONFIG_SPL_TEXT_BASE 0x7E1000
+#define CONFIG_SPL_MAX_SIZE (124 * 1024)
+#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
+
+#ifdef CONFIG_SPL_BUILD
+/*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
+#define CONFIG_SPL_WATCHDOG_SUPPORT
+#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
+#define CONFIG_SPL_POWER_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"
+#define CONFIG_SPL_STACK 0x187FF0
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_BSS_START_ADDR 0x00180000
+#define CONFIG_SPL_BSS_MAX_SIZE 0x2000 /* 8 KB */
+#define CONFIG_SYS_SPL_MALLOC_START 0x42200000
+#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 /* 512 KB */
+#define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000
+#define CONFIG_SYS_ICACHE_OFF
+#define CONFIG_SYS_DCACHE_OFF
+
+/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
+#define CONFIG_MALLOC_F_ADDR 0x182000
+/* For RAW image gives a error info not panic */
+#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
+
+#undef CONFIG_DM_MMC
+#undef CONFIG_DM_PMIC
+#undef CONFIG_DM_PMIC_PFUZE100
+
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
+#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
+
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_PFUZE100
+#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
+#endif
+
+#define CONFIG_REMAKE_ELF
+
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_LATE_INIT
+
+#undef CONFIG_CMD_EXPORTENV
+#undef CONFIG_CMD_IMPORTENV
+#undef CONFIG_CMD_IMLS
+
+#undef CONFIG_CMD_CRC32
+#undef CONFIG_BOOTM_NETBSD
+
+/* ENET Config */
+/* ENET1 */
+#if defined(CONFIG_CMD_NET)
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+#define CONFIG_MII
+#define CONFIG_ETHPRIME "FEC"
+
+#define CONFIG_FEC_MXC
+#define CONFIG_FEC_XCV_TYPE RGMII
+#define CONFIG_FEC_MXC_PHYADDR 0
+#define FEC_QUIRK_ENET_MAC
+
+#define CONFIG_PHY_GIGE
+#define IMX_FEC_BASE 0x30BE0000
+
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_ATHEROS
+#endif
+
+#define CONFIG_MFG_ENV_SETTINGS \
+ "mfgtool_args=setenv bootargs console=${console},${baudrate} " \
+ "rdinit=/linuxrc " \
+ "g_mass_storage.stall=0 g_mass_storage.removable=1 " \
+ "g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\
+ "g_mass_storage.iSerialNumber=\"\" "\
+ "clk_ignore_unused "\
+ "\0" \
+ "initrd_addr=0x43800000\0" \
+ "initrd_high=0xffffffff\0" \
+ "bootcmd_mfg=run mfgtool_args;booti ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \
+/* Initial environment variables */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ CONFIG_MFG_ENV_SETTINGS \
+ "script=boot.scr\0" \
+ "image=Image\0" \
+ "console=ttymxc0,115200 earlycon=ec_imx6q,0x30860000,115200\0" \
+ "fdt_addr=0x43000000\0" \
+ "fdt_high=0xffffffffffffffff\0" \
+ "boot_fdt=try\0" \
+ "fdt_file=fsl-imx8mq-evk.dtb\0" \
+ "initrd_addr=0x43800000\0" \
+ "initrd_high=0xffffffffffffffff\0" \
+ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
+ "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
+ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+ "mmcautodetect=yes\0" \
+ "mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \
+ "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+ "bootscript=echo Running bootscript from mmc ...; " \
+ "source\0" \
+ "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+ "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+ "mmcboot=echo Booting from mmc ...; " \
+ "run mmcargs; " \
+ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+ "if run loadfdt; then " \
+ "booti ${loadaddr} - ${fdt_addr}; " \
+ "else " \
+ "echo WARN: Cannot load the DT; " \
+ "fi; " \
+ "else " \
+ "echo wait for boot; " \
+ "fi;\0" \
+ "netargs=setenv bootargs console=${console} " \
+ "root=/dev/nfs " \
+ "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
+ "netboot=echo Booting from net ...; " \
+ "run netargs; " \
+ "if test ${ip_dyn} = yes; then " \
+ "setenv get_cmd dhcp; " \
+ "else " \
+ "setenv get_cmd tftp; " \
+ "fi; " \
+ "${get_cmd} ${loadaddr} ${image}; " \
+ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+ "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
+ "booti ${loadaddr} - ${fdt_addr}; " \
+ "else " \
+ "echo WARN: Cannot load the DT; " \
+ "fi; " \
+ "else " \
+ "booti; " \
+ "fi;\0"
+
+#define CONFIG_BOOTCOMMAND \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
+ "if run loadbootscript; then " \
+ "run bootscript; " \
+ "else " \
+ "if run loadimage; then " \
+ "run mmcboot; " \
+ "else run netboot; " \
+ "fi; " \
+ "fi; " \
+ "else booti ${loadaddr} - ${fdt_addr}; fi"
+
+/* Link Definitions */
+#define CONFIG_LOADADDR 0x40480000
+
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+
+#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
+#define CONFIG_SYS_INIT_RAM_SIZE 0x80000
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_ENV_OFFSET (64 * SZ_64K)
+#define CONFIG_ENV_SIZE 0x1000
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 1 /* USDHC2 */
+#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN ((CONFIG_ENV_SIZE + (2 * 1024)) * 1024)
+
+#define CONFIG_SYS_SDRAM_BASE 0x40000000
+#define PHYS_SDRAM 0x40000000
+#define PHYS_SDRAM_SIZE 0xC0000000 /* 3GB DDR */
+
+#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
+ (PHYS_SDRAM_SIZE >> 1))
+
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE UART1_BASE_ADDR
+
+/* Monitor Command Prompt */
+#undef CONFIG_SYS_PROMPT
+#define CONFIG_SYS_PROMPT "u-boot=> "
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_CBSIZE 1024
+#define CONFIG_SYS_MAXARGS 64
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+
+#define CONFIG_IMX_BOOTAUX
+
+#define CONFIG_CMD_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_FSL_USDHC
+
+#define CONFIG_SYS_FSL_USDHC_NUM 2
+#define CONFIG_SYS_FSL_ESDHC_ADDR 0
+
+#define CONFIG_DOS_PARTITION
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_EXT4_WRITE
+#define CONFIG_CMD_FAT
+
+#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
+#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
+
+#define CONFIG_MXC_GPIO
+
+#define CONFIG_MXC_OCOTP
+#define CONFIG_CMD_FUSE
+
+/* I2C Configs */
+#define CONFIG_SYS_I2C_SPEED 100000
+
+#define CONFIG_OF_SYSTEM_SETUP
+
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_DM_PMIC
+#endif
+
+#endif
#define CONFIG_SYS_NAND_BASE 0x40000000
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ONFI_DETECTION
+#define CONFIG_SYS_NAND_USE_FLASH_BBT
#endif
/* DMA stuff, needed for GPMI/MXS NAND support */
/* FLASH and environment organization */
#define CONFIG_ENV_SIZE SZ_8K
-#define CONFIG_ENV_OFFSET (8 * SZ_64K)
+/* Environment starts at 768k = 768 * 1024 = 786432 */
+#define CONFIG_ENV_OFFSET 786432
+/*
+ * Detect overlap between U-Boot image and environment area in build-time
+ *
+ * CONFIG_BOARD_SIZE_LIMIT = CONFIG_ENV_OFFSET - u-boot.img offset
+ * CONFIG_BOARD_SIZE_LIMIT = 768k - 69k = 699k = 715776
+ *
+ * Currently CONFIG_BOARD_SIZE_LIMIT does not handle expressions, so
+ * write the direct value here
+ */
+#define CONFIG_BOARD_SIZE_LIMIT 715776
+
#define CONFIG_SYS_FSL_USDHC_NUM 2
#define CONFIG_SYS_MMC_ENV_DEV 0
"third_image=u-boot.bin\0"
#endif
+#define CONFIG_PREBOOT "env exist ${bootdev}preboot && run ${bootdev}preboot"
+
#define CONFIG_ROOTPATH "/nfs/root/path"
#define CONFIG_NFSBOOTCOMMAND \
"setenv bootargs $bootargs root=/dev/nfs rw " \
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"initrd_high=0xffffffffffffffff\0" \
+ "script=boot.scr\0" \
"scriptaddr=0x85000000\0" \
"nor_base=0x42000000\0" \
+ "emmcboot=mmcsetn && run bootcmd_mmc${mmc_first_dev}\0" \
+ "nandboot=run bootcmd_ubifs0\0" \
+ "norboot=run tftpboot\0" \
+ "usbboot=run bootcmd_usb0\0" \
+ "emmcscript=setenv devtype mmc && " \
+ "mmcsetn && " \
+ "setenv devnum ${mmc_first_dev} && " \
+ "run loadscript_fat\0" \
+ "nandscript=echo Running ${script} from ubi ... && " \
+ "ubi part UBI && " \
+ "ubifsmount ubi0:boot && " \
+ "ubifsload ${loadaddr} ${script} && " \
+ "source\0" \
+ "norscript=echo Running ${script} from tftp ... && " \
+ "tftpboot ${script} &&" \
+ "source\0" \
+ "usbscript=usb start && " \
+ "setenv devtype usb && " \
+ "setenv devnum 0 && " \
+ "run loadscript_fat\0" \
+ "loadscript_fat=echo Running ${script} from ${devtype}${devnum} ... && " \
+ "load ${devtype} ${devnum}:1 ${loadaddr} ${script} && " \
+ "source\0" \
"sramupdate=setexpr tmp_addr $nor_base + 0x50000 &&" \
"tftpboot $tmp_addr $second_image && " \
"setexpr tmp_addr $nor_base + 0x70000 && " \
int pinctrl_decode_pin_config(const void *blob, int node);
/**
+ * pinctrl_decode_pin_config_dm() - decode pin configuration flags
+ *
+ * This decodes some of the PIN_CONFIG values into flags, with each value
+ * being (1 << pin_cfg). This does not support things with values like the
+ * slew rate.
+ *
+ * @pinconfig: Pinconfig udevice
+ * @return decoded flag value, or -ve on error
+ */
+int pinctrl_decode_pin_config_dm(struct udevice *dev);
+
+/**
* pinctrl_get_gpio_mux() - get the mux value for a particular GPIO
*
* This allows the raw mux value for a GPIO to be obtained. It is
#define FLASH_OFFSET_NOR 0x1000
#define FLASH_OFFSET_SATA FLASH_OFFSET_STANDARD
#define FLASH_OFFSET_QSPI 0x1000
+#define FLASH_OFFSET_FLEXSPI 0x1000
/* Initial Load Region Size */
#define FLASH_LOADSIZE_UNDEFINED 0xFFFFFFFF
/* Command tags and parameters */
#define IVT_HEADER_TAG 0xD1
#define IVT_VERSION 0x40
+#define IVT_VERSION_V3 0x41
#define DCD_HEADER_TAG 0xD2
#define DCD_VERSION 0x40
#define DCD_WRITE_DATA_COMMAND_TAG 0xCC
CMD_CHECK_BITS_CLR,
CMD_CSF,
CMD_PLUGIN,
+ /* Follwoing on i.MX8MQ/MM */
+ CMD_FIT,
+ CMD_SIGNED_HDMI,
+ CMD_LOADER,
+ CMD_SECOND_LOADER,
+ CMD_DDR_FW,
};
enum imximage_fld_types {
enum imximage_version {
IMXIMAGE_VER_INVALID = -1,
IMXIMAGE_V1 = 1,
- IMXIMAGE_V2
+ IMXIMAGE_V2,
+ IMXIMAGE_V3
};
typedef struct {
} data;
} imx_header_v2_t;
+typedef struct {
+ flash_header_v2_t fhdr;
+ boot_data_t boot_data;
+ uint32_t padding[5];
+} imx_header_v3_t;
+
/* The header must be aligned to 4k on MX53 for NAND boot */
struct imx_header {
union {
(((__x) - ((__d) / 2)) / (__d)); \
} \
)
+/*
+ * Same as above but for u64 dividends. divisor must be a 32-bit
+ * number.
+ */
+#define DIV_ROUND_CLOSEST_ULL(x, divisor)( \
+{ \
+ typeof(divisor) __d = divisor; \
+ unsigned long long _tmp = (x) + (__d) / 2; \
+ do_div(_tmp, __d); \
+ _tmp; \
+} \
+)
/*
* Multiplies an integer by a fraction, while avoiding unnecessary
struct spl_load_info *info, ulong sector, void *fdt);
#define SPL_COPY_PAYLOAD_ONLY 1
+#define SPL_FIT_FOUND 2
/* SPL common functions */
void preloader_console_init(void);
void board_return_to_bootrom(void);
/**
+ * board_spl_fit_post_load - allow process images after loading finished
+ *
+ */
+void board_spl_fit_post_load(ulong load_addr, size_t length);
+
+/**
+ * board_spl_fit_size_align - specific size align before processing payload
+ *
+ */
+ulong board_spl_fit_size_align(ulong size);
+
+/**
* spl_perform_fixups() - arch/board-specific callback before processing
* the boot-payload
*/
int do_bootvx(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
void boot_prep_vxworks(bootm_headers_t *images);
void boot_jump_vxworks(bootm_headers_t *images);
-void do_bootvx_fdt(bootm_headers_t *images);
#endif
imagetool.o \
imximage.o \
imx8image.o \
+ imx8mimage.o \
kwbimage.o \
lib/md5.o \
lpc32xximage.o \
void pbl_load_uboot(int fd, struct image_tool_params *mparams);
int zynqmpbif_copy_image(int fd, struct image_tool_params *mparams);
int imx8image_copy_image(int fd, struct image_tool_params *mparams);
+int imx8mimage_copy_image(int fd, struct image_tool_params *mparams);
#define ___cat(a, b) a ## b
#define __cat(a, b) ___cat(a, b)
--- /dev/null
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0+
+#
+# script to check whether the file exists in imximage.cfg for i.MX8M
+#
+
+file=$1
+
+post_process=$2
+
+blobs=`awk '/^SIGNED_HDMI/ {print $2} /^LOADER/ {print $2} /^SECOND_LOADER/ {print $2} /^DDR_FW/ {print $2}' $file`
+for f in $blobs; do
+ tmp=$srctree/$f
+
+ if [ $f == "spl/u-boot-spl-ddr.bin" ] || [ $f == "u-boot.itb" ]; then
+ continue
+ fi
+
+ if [ -f $f ]; then
+ continue
+ fi
+
+ if [ ! -f $tmp ]; then
+ echo "WARNING '$tmp' not found, resulting binary is not-functional" >&2
+ exit 1
+ fi
+
+ sed -in "s;$f;$tmp;" $file
+done
+
+if [ $post_process == 1 ]; then
+ if [ -f $srctree/lpddr4_pmu_train_1d_imem.bin ]; then
+ objcopy -I binary -O binary --pad-to 0x8000 --gap-fill=0x0 $srctree/lpddr4_pmu_train_1d_imem.bin lpddr4_pmu_train_1d_imem_pad.bin
+ objcopy -I binary -O binary --pad-to 0x4000 --gap-fill=0x0 $srctree/lpddr4_pmu_train_1d_dmem.bin lpddr4_pmu_train_1d_dmem_pad.bin
+ objcopy -I binary -O binary --pad-to 0x8000 --gap-fill=0x0 $srctree/lpddr4_pmu_train_2d_imem.bin lpddr4_pmu_train_2d_imem_pad.bin
+ cat lpddr4_pmu_train_1d_imem_pad.bin lpddr4_pmu_train_1d_dmem_pad.bin > lpddr4_pmu_train_1d_fw.bin
+ cat lpddr4_pmu_train_2d_imem_pad.bin $srctree/lpddr4_pmu_train_2d_dmem.bin > lpddr4_pmu_train_2d_fw.bin
+ cat spl/u-boot-spl.bin lpddr4_pmu_train_1d_fw.bin lpddr4_pmu_train_2d_fw.bin > spl/u-boot-spl-ddr.bin
+ rm -f lpddr4_pmu_train_1d_fw.bin lpddr4_pmu_train_2d_fw.bin lpddr4_pmu_train_1d_imem_pad.bin lpddr4_pmu_train_1d_dmem_pad.bin lpddr4_pmu_train_2d_imem_pad.bin
+ fi
+fi
+
+exit 0
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ *
+ * Peng Fan <peng.fan@nxp.com>
+ */
+
+
+#include "imagetool.h"
+#include <image.h>
+#include "imximage.h"
+#include "compiler.h"
+
+static uint32_t ap_start_addr, sld_start_addr, sld_src_off;
+static char *ap_img, *sld_img, *signed_hdmi;
+static imx_header_v3_t imx_header[2]; /* At most there are 3 IVT headers */
+static uint32_t rom_image_offset;
+static uint32_t sector_size = 0x200;
+static uint32_t image_off;
+static uint32_t sld_header_off;
+static uint32_t ivt_offset;
+static uint32_t using_fit;
+
+#define CSF_SIZE 0x2000
+#define HDMI_IVT_ID 0
+#define IMAGE_IVT_ID 1
+
+#define HDMI_FW_SIZE 0x17000 /* Use Last 0x1000 for IVT and CSF */
+#define ALIGN_SIZE 0x1000
+#define ALIGN(x,a) __ALIGN_MASK((x), (__typeof__(x))(a) - 1, a)
+#define __ALIGN_MASK(x,mask,mask2) (((x) + (mask)) / (mask2) * (mask2))
+
+static uint32_t get_cfg_value(char *token, char *name, int linenr)
+{
+ char *endptr;
+ uint32_t value;
+
+ errno = 0;
+ value = strtoul(token, &endptr, 16);
+ if (errno || token == endptr) {
+ fprintf(stderr, "Error: %s[%d] - Invalid hex data(%s)\n",
+ name, linenr, token);
+ exit(EXIT_FAILURE);
+ }
+ return value;
+}
+
+int imx8mimage_check_params(struct image_tool_params *params)
+{
+ return 0;
+}
+
+static void imx8mimage_set_header(void *ptr, struct stat *sbuf, int ifd,
+ struct image_tool_params *params)
+{
+}
+
+static void imx8mimage_print_header(const void *ptr)
+{
+}
+
+static int imx8mimage_check_image_types(uint8_t type)
+{
+ return (type == IH_TYPE_IMX8MIMAGE) ? EXIT_SUCCESS : EXIT_FAILURE;
+}
+
+static table_entry_t imx8mimage_cmds[] = {
+ {CMD_BOOT_FROM, "BOOT_FROM", "boot command", },
+ {CMD_FIT, "FIT", "fit image", },
+ {CMD_SIGNED_HDMI, "SIGNED_HDMI", "signed hdmi image", },
+ {CMD_LOADER, "LOADER", "loader image", },
+ {CMD_SECOND_LOADER, "SECOND_LOADER", "2nd loader image", },
+ {CMD_DDR_FW, "DDR_FW", "ddr firmware", },
+ {-1, "", "", },
+};
+
+static table_entry_t imx8mimage_ivt_offset[] = {
+ {0x400, "sd", "sd/emmc",},
+ {0x400, "emmc_fastboot", "emmc fastboot",},
+ {0x1000, "fspi", "flexspi", },
+ {-1, "", "Invalid", },
+};
+
+static void parse_cfg_cmd(int32_t cmd, char *token, char *name, int lineno)
+{
+ switch (cmd) {
+ case CMD_BOOT_FROM:
+ ivt_offset = get_table_entry_id(imx8mimage_ivt_offset,
+ "imx8mimage ivt offset",
+ token);
+ if (!strncmp(token, "sd", 2))
+ rom_image_offset = 0x8000;
+ break;
+ case CMD_LOADER:
+ ap_img = token;
+ break;
+ case CMD_SECOND_LOADER:
+ sld_img = token;
+ break;
+ case CMD_SIGNED_HDMI:
+ signed_hdmi = token;
+ case CMD_FIT:
+ using_fit = 1;
+ break;
+ case CMD_DDR_FW:
+ /* Do nothing */
+ break;
+ }
+}
+
+static void parse_cfg_fld(int32_t *cmd, char *token,
+ char *name, int lineno, int fld)
+{
+ switch (fld) {
+ case CFG_COMMAND:
+ *cmd = get_table_entry_id(imx8mimage_cmds,
+ "imx8mimage commands", token);
+ if (*cmd < 0) {
+ fprintf(stderr, "Error: %s[%d] - Invalid command" "(%s)\n",
+ name, lineno, token);
+ exit(EXIT_FAILURE);
+ }
+ break;
+ case CFG_REG_SIZE:
+ parse_cfg_cmd(*cmd, token, name, lineno);
+ break;
+ case CFG_REG_ADDRESS:
+ switch (*cmd) {
+ case CMD_LOADER:
+ ap_start_addr = get_cfg_value(token, name, lineno);
+ break;
+ case CMD_SECOND_LOADER:
+ sld_start_addr = get_cfg_value(token, name, lineno);
+ break;
+ }
+ break;
+ case CFG_REG_VALUE:
+ switch (*cmd) {
+ case CMD_SECOND_LOADER:
+ sld_src_off = get_cfg_value(token, name, lineno);
+ break;
+ }
+ default:
+ break;
+ }
+}
+
+static uint32_t parse_cfg_file(char *name)
+{
+ FILE *fd = NULL;
+ char *line = NULL;
+ char *token, *saveptr1, *saveptr2;
+ int lineno = 0;
+ int fld;
+ size_t len;
+ int32_t cmd;
+
+ fd = fopen(name, "r");
+ if (fd == 0) {
+ fprintf(stderr, "Error: %s - Can't open cfg file\n", name);
+ exit(EXIT_FAILURE);
+ }
+
+ /*
+ * Very simple parsing, line starting with # are comments
+ * and are dropped
+ */
+ while ((getline(&line, &len, fd)) > 0) {
+ lineno++;
+
+ token = strtok_r(line, "\r\n", &saveptr1);
+ if (!token)
+ continue;
+
+ /* Check inside the single line */
+ for (fld = CFG_COMMAND, cmd = CFG_INVALID,
+ line = token; ; line = NULL, fld++) {
+ token = strtok_r(line, " \t", &saveptr2);
+ if (!token)
+ break;
+
+ /* Drop all text starting with '#' as comments */
+ if (token[0] == '#')
+ break;
+
+ parse_cfg_fld(&cmd, token, name, lineno, fld);
+ }
+ }
+
+ return 0;
+}
+
+static void fill_zero(int ifd, int size, int offset)
+{
+ int fill_size;
+ uint8_t zeros[4096];
+ int ret;
+
+ memset(zeros, 0, sizeof(zeros));
+
+ ret = lseek(ifd, offset, SEEK_SET);
+ if (ret < 0) {
+ fprintf(stderr, "%s seek: %s\n", __func__, strerror(errno));
+ exit(EXIT_FAILURE);
+ }
+
+ while (size) {
+ if (size > 4096)
+ fill_size = 4096;
+ else
+ fill_size = size;
+
+ if (write(ifd, (char *)&zeros, fill_size) != fill_size) {
+ fprintf(stderr, "Write error: %s\n",
+ strerror(errno));
+ exit(EXIT_FAILURE);
+ }
+
+ size -= fill_size;
+ };
+}
+
+static void copy_file(int ifd, const char *datafile, int pad, int offset,
+ int datafile_offset)
+{
+ int dfd;
+ struct stat sbuf;
+ unsigned char *ptr;
+ int tail;
+ int zero = 0;
+ uint8_t zeros[4096];
+ int size, ret;
+
+ memset(zeros, 0, sizeof(zeros));
+
+ dfd = open(datafile, O_RDONLY | O_BINARY);
+ if (dfd < 0) {
+ fprintf(stderr, "Can't open %s: %s\n",
+ datafile, strerror(errno));
+ exit(EXIT_FAILURE);
+ }
+
+ if (fstat(dfd, &sbuf) < 0) {
+ fprintf(stderr, "Can't stat %s: %s\n",
+ datafile, strerror(errno));
+ exit(EXIT_FAILURE);
+ }
+
+ ptr = mmap(0, sbuf.st_size, PROT_READ, MAP_SHARED, dfd, 0);
+ if (ptr == MAP_FAILED) {
+ fprintf(stderr, "Can't read %s: %s\n",
+ datafile, strerror(errno));
+ exit(EXIT_FAILURE);
+ }
+
+ size = sbuf.st_size - datafile_offset;
+ ret = lseek(ifd, offset, SEEK_SET);
+ if (ret < 0) {
+ fprintf(stderr, "lseek ifd fail\n");
+ exit(EXIT_FAILURE);
+ }
+
+ if (write(ifd, ptr + datafile_offset, size) != size) {
+ fprintf(stderr, "Write error %s\n",
+ strerror(errno));
+ exit(EXIT_FAILURE);
+ }
+
+ tail = size % 4;
+ pad = pad - size;
+ if (pad == 1 && tail != 0) {
+ if (write(ifd, (char *)&zero, 4 - tail) != 4 - tail) {
+ fprintf(stderr, "Write error on %s\n",
+ strerror(errno));
+ exit(EXIT_FAILURE);
+ }
+ } else if (pad > 1) {
+ while (pad > 0) {
+ int todo = sizeof(zeros);
+
+ if (todo > pad)
+ todo = pad;
+ if (write(ifd, (char *)&zeros, todo) != todo) {
+ fprintf(stderr, "Write error: %s\n",
+ strerror(errno));
+ exit(EXIT_FAILURE);
+ }
+ pad -= todo;
+ }
+ }
+
+ munmap((void *)ptr, sbuf.st_size);
+ close(dfd);
+}
+
+/* Return this IVT offset in the final output file */
+static int generate_ivt_for_fit(int fd, int fit_offset, uint32_t ep,
+ uint32_t *fit_load_addr)
+{
+ image_header_t image_header;
+ int ret;
+
+ uint32_t fit_size, load_addr;
+ int align_len = 64 - 1; /* 64 is cacheline size */
+
+ ret = lseek(fd, fit_offset, SEEK_SET);
+ if (ret < 0) {
+ fprintf(stderr, "lseek fd fail for fit\n");
+ exit(EXIT_FAILURE);
+ }
+
+ if (read(fd, (char *)&image_header, sizeof(image_header_t)) !=
+ sizeof(image_header_t)) {
+ fprintf(stderr, "generate_ivt_for_fit read failed: %s\n",
+ strerror(errno));
+ exit(EXIT_FAILURE);
+ }
+
+ if (be32_to_cpu(image_header.ih_magic) != FDT_MAGIC) {
+ fprintf(stderr, "%s error: not a FIT file\n", __func__);
+ exit(EXIT_FAILURE);
+ }
+
+ fit_size = fdt_totalsize(&image_header);
+ fit_size = (fit_size + 3) & ~3;
+
+ fit_size = ALIGN(fit_size, ALIGN_SIZE);
+
+ ret = lseek(fd, fit_offset + fit_size, SEEK_SET);
+ if (ret < 0) {
+ fprintf(stderr, "lseek fd fail for fit\n");
+ exit(EXIT_FAILURE);
+ }
+
+ /*
+ * ep is the u-boot entry. SPL loads the FIT before the u-boot
+ * address. 0x2000 is for CSF_SIZE
+ */
+ load_addr = (ep - (fit_size + CSF_SIZE) - 512 - align_len) &
+ ~align_len;
+
+ flash_header_v2_t ivt_header = { { 0xd1, 0x2000, 0x40 },
+ load_addr, 0, 0, 0,
+ (load_addr + fit_size),
+ (load_addr + fit_size + 0x20),
+ 0 };
+
+ if (write(fd, &ivt_header, sizeof(flash_header_v2_t)) !=
+ sizeof(flash_header_v2_t)) {
+ fprintf(stderr, "IVT writing error on fit image\n");
+ exit(EXIT_FAILURE);
+ }
+
+ *fit_load_addr = load_addr;
+
+ return fit_offset + fit_size;
+}
+
+static void dump_header_v2(imx_header_v3_t *imx_header, int index)
+{
+ const char *ivt_name[2] = {"HDMI FW", "LOADER IMAGE"};
+
+ fprintf(stdout, "========= IVT HEADER [%s] =========\n",
+ ivt_name[index]);
+ fprintf(stdout, "header.tag: \t\t0x%x\n",
+ imx_header[index].fhdr.header.tag);
+ fprintf(stdout, "header.length: \t\t0x%x\n",
+ imx_header[index].fhdr.header.length);
+ fprintf(stdout, "header.version: \t0x%x\n",
+ imx_header[index].fhdr.header.version);
+ fprintf(stdout, "entry: \t\t\t0x%x\n",
+ imx_header[index].fhdr.entry);
+ fprintf(stdout, "reserved1: \t\t0x%x\n",
+ imx_header[index].fhdr.reserved1);
+ fprintf(stdout, "dcd_ptr: \t\t0x%x\n",
+ imx_header[index].fhdr.dcd_ptr);
+ fprintf(stdout, "boot_data_ptr: \t\t0x%x\n",
+ imx_header[index].fhdr.boot_data_ptr);
+ fprintf(stdout, "self: \t\t\t0x%x\n",
+ imx_header[index].fhdr.self);
+ fprintf(stdout, "csf: \t\t\t0x%x\n",
+ imx_header[index].fhdr.csf);
+ fprintf(stdout, "reserved2: \t\t0x%x\n",
+ imx_header[index].fhdr.reserved2);
+
+ fprintf(stdout, "boot_data.start: \t0x%x\n",
+ imx_header[index].boot_data.start);
+ fprintf(stdout, "boot_data.size: \t0x%x\n",
+ imx_header[index].boot_data.size);
+ fprintf(stdout, "boot_data.plugin: \t0x%x\n",
+ imx_header[index].boot_data.plugin);
+}
+
+void build_image(int ofd)
+{
+ int file_off, header_hdmi_off = 0, header_image_off;
+ int hdmi_fd, ap_fd, sld_fd;
+ uint32_t sld_load_addr = 0;
+ uint32_t csf_off, sld_csf_off = 0;
+ int ret;
+ struct stat sbuf;
+
+ if (!ap_img) {
+ fprintf(stderr, "No LOADER image specificed\n");
+ exit(EXIT_FAILURE);
+ }
+
+ file_off = 0;
+
+ if (signed_hdmi) {
+ header_hdmi_off = file_off + ivt_offset;
+
+ hdmi_fd = open(signed_hdmi, O_RDONLY | O_BINARY);
+ if (hdmi_fd < 0) {
+ fprintf(stderr, "%s: Can't open: %s\n",
+ signed_hdmi, strerror(errno));
+ exit(EXIT_FAILURE);
+ }
+
+ if (fstat(hdmi_fd, &sbuf) < 0) {
+ fprintf(stderr, "%s: Can't stat: %s\n",
+ signed_hdmi, strerror(errno));
+ exit(EXIT_FAILURE);
+ }
+ close(hdmi_fd);
+
+ /*
+ * Aligned to 104KB = 92KB FW image + 0x8000
+ * (IVT and alignment) + 0x4000 (second IVT + CSF)
+ */
+ file_off += ALIGN(sbuf.st_size,
+ HDMI_FW_SIZE + 0x2000 + 0x1000);
+ }
+
+ header_image_off = file_off + ivt_offset;
+
+ ap_fd = open(ap_img, O_RDONLY | O_BINARY);
+ if (ap_fd < 0) {
+ fprintf(stderr, "%s: Can't open: %s\n",
+ ap_img, strerror(errno));
+ exit(EXIT_FAILURE);
+ }
+ if (fstat(ap_fd, &sbuf) < 0) {
+ fprintf(stderr, "%s: Can't stat: %s\n",
+ ap_img, strerror(errno));
+ exit(EXIT_FAILURE);
+ }
+ close(ap_fd);
+
+ imx_header[IMAGE_IVT_ID].fhdr.header.tag = IVT_HEADER_TAG; /* 0xD1 */
+ imx_header[IMAGE_IVT_ID].fhdr.header.length =
+ cpu_to_be16(sizeof(flash_header_v2_t));
+ imx_header[IMAGE_IVT_ID].fhdr.header.version = IVT_VERSION_V3; /* 0x41 */
+ imx_header[IMAGE_IVT_ID].fhdr.entry = ap_start_addr;
+ imx_header[IMAGE_IVT_ID].fhdr.self = ap_start_addr -
+ sizeof(imx_header_v3_t);
+ imx_header[IMAGE_IVT_ID].fhdr.dcd_ptr = 0;
+ imx_header[IMAGE_IVT_ID].fhdr.boot_data_ptr =
+ imx_header[IMAGE_IVT_ID].fhdr.self +
+ offsetof(imx_header_v3_t, boot_data);
+ imx_header[IMAGE_IVT_ID].boot_data.start =
+ imx_header[IMAGE_IVT_ID].fhdr.self - ivt_offset;
+ imx_header[IMAGE_IVT_ID].boot_data.size =
+ ALIGN(sbuf.st_size + sizeof(imx_header_v3_t) + ivt_offset,
+ sector_size);
+
+ image_off = header_image_off + sizeof(imx_header_v3_t);
+ file_off += imx_header[IMAGE_IVT_ID].boot_data.size;
+
+ imx_header[IMAGE_IVT_ID].boot_data.plugin = 0;
+ imx_header[IMAGE_IVT_ID].fhdr.csf =
+ imx_header[IMAGE_IVT_ID].boot_data.start +
+ imx_header[IMAGE_IVT_ID].boot_data.size;
+
+ imx_header[IMAGE_IVT_ID].boot_data.size += CSF_SIZE; /* 8K region dummy CSF */
+
+ csf_off = file_off;
+ file_off += CSF_SIZE;
+
+ /* Second boot loader image */
+ if (sld_img) {
+ if (!using_fit) {
+ fprintf(stderr, "Not support no fit\n");
+ exit(EXIT_FAILURE);
+ } else {
+ sld_header_off = sld_src_off - rom_image_offset;
+ /*
+ * Record the second bootloader relative offset in
+ * image's IVT reserved1
+ */
+ imx_header[IMAGE_IVT_ID].fhdr.reserved1 =
+ sld_header_off - header_image_off;
+ sld_fd = open(sld_img, O_RDONLY | O_BINARY);
+ if (sld_fd < 0) {
+ fprintf(stderr, "%s: Can't open: %s\n",
+ sld_img, strerror(errno));
+ exit(EXIT_FAILURE);
+ }
+
+ if (fstat(sld_fd, &sbuf) < 0) {
+ fprintf(stderr, "%s: Can't stat: %s\n",
+ sld_img, strerror(errno));
+ exit(EXIT_FAILURE);
+ }
+
+ close(sld_fd);
+
+ file_off = sld_header_off;
+ file_off += sbuf.st_size + sizeof(image_header_t);
+ }
+ }
+
+ if (signed_hdmi) {
+ header_hdmi_off -= ivt_offset;
+ ret = lseek(ofd, header_hdmi_off, SEEK_SET);
+ if (ret < 0) {
+ fprintf(stderr, "lseek ofd fail for hdmi\n");
+ exit(EXIT_FAILURE);
+ }
+
+ /* The signed HDMI FW has 0x400 IVT offset, need remove it */
+ copy_file(ofd, signed_hdmi, 0, header_hdmi_off, 0x400);
+ }
+
+ /* Main Image */
+ header_image_off -= ivt_offset;
+ image_off -= ivt_offset;
+ ret = lseek(ofd, header_image_off, SEEK_SET);
+ if (ret < 0) {
+ fprintf(stderr, "lseek ofd fail\n");
+ exit(EXIT_FAILURE);
+ }
+
+ /* Write image header */
+ if (write(ofd, &imx_header[IMAGE_IVT_ID], sizeof(imx_header_v3_t)) !=
+ sizeof(imx_header_v3_t)) {
+ fprintf(stderr, "error writing image hdr\n");
+ exit(1);
+ }
+
+ copy_file(ofd, ap_img, 0, image_off, 0);
+
+ csf_off -= ivt_offset;
+ fill_zero(ofd, CSF_SIZE, csf_off);
+
+ if (sld_img) {
+ sld_header_off -= ivt_offset;
+ ret = lseek(ofd, sld_header_off, SEEK_SET);
+ if (ret < 0) {
+ fprintf(stderr, "lseek ofd fail for sld_img\n");
+ exit(EXIT_FAILURE);
+ }
+
+ /* Write image header */
+ if (!using_fit) {
+ /* TODO */
+ } else {
+ copy_file(ofd, sld_img, 0, sld_header_off, 0);
+ sld_csf_off =
+ generate_ivt_for_fit(ofd, sld_header_off,
+ sld_start_addr,
+ &sld_load_addr) + 0x20;
+ }
+ }
+
+ if (!signed_hdmi)
+ dump_header_v2(imx_header, 0);
+ dump_header_v2(imx_header, 1);
+
+ fprintf(stdout, "========= OFFSET dump =========");
+ if (signed_hdmi) {
+ fprintf(stdout, "\nSIGNED HDMI FW:\n");
+ fprintf(stdout, " header_hdmi_off \t0x%x\n",
+ header_hdmi_off);
+ }
+
+ fprintf(stdout, "\nLoader IMAGE:\n");
+ fprintf(stdout, " header_image_off \t0x%x\n image_off \t\t0x%x\n csf_off \t\t0x%x\n",
+ header_image_off, image_off, csf_off);
+ fprintf(stdout, " spl hab block: \t0x%x 0x%x 0x%x\n",
+ imx_header[IMAGE_IVT_ID].fhdr.self, header_image_off,
+ csf_off - header_image_off);
+
+ fprintf(stdout, "\nSecond Loader IMAGE:\n");
+ fprintf(stdout, " sld_header_off \t0x%x\n",
+ sld_header_off);
+ fprintf(stdout, " sld_csf_off \t\t0x%x\n",
+ sld_csf_off);
+ fprintf(stdout, " sld hab block: \t0x%x 0x%x 0x%x\n",
+ sld_load_addr, sld_header_off, sld_csf_off - sld_header_off);
+}
+
+int imx8mimage_copy_image(int outfd, struct image_tool_params *mparams)
+{
+ /*
+ * SECO FW is a container image, this is to calculate the
+ * 2nd container offset.
+ */
+ fprintf(stdout, "parsing %s\n", mparams->imagename);
+ parse_cfg_file(mparams->imagename);
+
+ build_image(outfd);
+
+ return 0;
+}
+
+/*
+ * imx8mimage parameters
+ */
+U_BOOT_IMAGE_TYPE(
+ imx8mimage,
+ "NXP i.MX8M Boot Image support",
+ 0,
+ NULL,
+ imx8mimage_check_params,
+ NULL,
+ imx8mimage_print_header,
+ imx8mimage_set_header,
+ NULL,
+ imx8mimage_check_image_types,
+ NULL,
+ NULL
+);
blobs=`awk '/^APPEND/ {print $2} /^IMAGE/ || /^DATA/ {print $3}' $file`
for f in $blobs; do
tmp=$srctree/$f
- if [ $f == "u-boot-dtb.bin" ]; then
+ if [ $f = "u-boot-dtb.bin" ]; then
continue
fi
ret = imx8image_copy_image(ifd, ¶ms);
if (ret)
return ret;
+ } else if (params.type == IH_TYPE_IMX8MIMAGE) {
+ /* i.MX8M has special Image format */
+ int ret;
+
+ ret = imx8mimage_copy_image(ifd, ¶ms);
+ if (ret)
+ return ret;
} else {
copy_file(ifd, params.datafile, pad_len);
}
projects / platform / kernel / u-boot.git / commitdiff