Remove qemu_mips boards because DM migration doesn't make sense.
The board support for qemu_mips is already marked as deprecated
in Qemu in favour of the Malta board. Also qemu_mips support
has been removed from Linux a long time ago.
The official replacement is the Malta board. The same Malta U-Boot
image can be used with Qemu and on physical hardware.
All combinations of Big Endian and Little Endian as well as 32 bit
and 64 bit are supported.
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
qemu_arm64:
TEST_PY_BD: "qemu_arm64"
TEST_PY_TEST_SPEC: "not sleep"
- qemu_mips:
- TEST_PY_BD: "qemu_mips"
- TEST_PY_TEST_SPEC: "not sleep"
- qemu_mipsel:
- TEST_PY_BD: "qemu_mipsel"
- TEST_PY_TEST_SPEC: "not sleep"
- qemu_mips64:
- TEST_PY_BD: "qemu_mips64"
- TEST_PY_TEST_SPEC: "not sleep"
- qemu_mips64el:
- TEST_PY_BD: "qemu_mips64el"
- TEST_PY_TEST_SPEC: "not sleep"
qemu_malta:
TEST_PY_BD: "malta"
TEST_PY_ID: "--id qemu"
TEST_PY_TEST_SPEC: "not sleep"
<<: *buildman_and_testpy_dfn
-qemu_mips test.py:
- variables:
- TEST_PY_BD: "qemu_mips"
- TEST_PY_TEST_SPEC: "not sleep"
- <<: *buildman_and_testpy_dfn
-
-qemu_mipsel test.py:
- variables:
- TEST_PY_BD: "qemu_mipsel"
- TEST_PY_TEST_SPEC: "not sleep"
- <<: *buildman_and_testpy_dfn
-
-qemu_mips64 test.py:
- variables:
- TEST_PY_BD: "qemu_mips64"
- TEST_PY_TEST_SPEC: "not sleep"
- <<: *buildman_and_testpy_dfn
-
-qemu_mips64el test.py:
- variables:
- TEST_PY_BD: "qemu_mips64el"
- TEST_PY_TEST_SPEC: "not sleep"
- <<: *buildman_and_testpy_dfn
-
qemu_malta test.py:
variables:
TEST_PY_BD: "malta"
prompt "Target select"
optional
-config TARGET_QEMU_MIPS
- bool "Support qemu-mips"
- select ROM_EXCEPTION_VECTORS
- select SUPPORTS_BIG_ENDIAN
- select SUPPORTS_CPU_MIPS32_R1
- select SUPPORTS_CPU_MIPS32_R2
- select SUPPORTS_CPU_MIPS64_R1
- select SUPPORTS_CPU_MIPS64_R2
- select SUPPORTS_LITTLE_ENDIAN
-
config TARGET_MALTA
bool "Support malta"
select DM
source "board/imgtec/boston/Kconfig"
source "board/imgtec/malta/Kconfig"
source "board/imgtec/xilfpga/Kconfig"
-source "board/qemu-mips/Kconfig"
source "arch/mips/mach-ath79/Kconfig"
source "arch/mips/mach-mscc/Kconfig"
source "arch/mips/mach-bmips/Kconfig"
+++ /dev/null
-if TARGET_QEMU_MIPS
-
-config SYS_BOARD
- default "qemu-mips"
-
-config SYS_CONFIG_NAME
- default "qemu-mips" if 32BIT
- default "qemu-mips64" if 64BIT
-
-config SYS_TEXT_BASE
- default 0xbfc00000 if 32BIT
- default 0xffffffffbfc00000 if 64BIT
-
-config SYS_DCACHE_SIZE
- default 16384
-
-config SYS_DCACHE_LINE_SIZE
- default 32
-
-config SYS_ICACHE_SIZE
- default 16384
-
-config SYS_ICACHE_LINE_SIZE
- default 32
-
-endif
+++ /dev/null
-QEMU-MIPS BOARD
-M: Vlad Lungu <vlad.lungu@windriver.com>
-S: Maintained
-F: board/qemu-mips/
-F: include/configs/qemu-mips.h
-F: configs/qemu_mips_defconfig
-
-QEMU_MIPSEL BOARD
-#M: -
-S: Maintained
-F: configs/qemu_mipsel_defconfig
-F: include/configs/qemu-mips64.h
-F: configs/qemu_mips64_defconfig
-F: configs/qemu_mips64el_defconfig
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-
-obj-y = qemu-mips.o
-obj-y += lowlevel_init.o
+++ /dev/null
-/* Memory sub-system initialization code */
-
-#include <config.h>
-#include <asm/regdef.h>
-#include <asm/mipsregs.h>
-
- .text
- .set noreorder
- .set mips32
-
- .globl lowlevel_init
-lowlevel_init:
-
- /*
- * Step 2) Establish Status Register
- * (set BEV, clear ERL, clear EXL, clear IE)
- */
- li t1, 0x00400000
- mtc0 t1, CP0_STATUS
-
- /*
- * Step 3) Establish CP0 Config0
- * (set K0=3)
- */
- li t1, 0x00000003
- mtc0 t1, CP0_CONFIG
-
- /*
- * Step 7) Establish Cause
- * (set IV bit)
- */
- li t1, 0x00800000
- mtc0 t1, CP0_CAUSE
-
- /* Establish Wired (and Random) */
- mtc0 zero, CP0_WIRED
- nop
-
- jr ra
- nop
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2007
- * Vlad Lungu vlad.lungu@windriver.com
- */
-
-#include <common.h>
-#include <command.h>
-#include <init.h>
-#include <net.h>
-#include <asm/global_data.h>
-#include <asm/mipsregs.h>
-#include <asm/io.h>
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int dram_init(void)
-{
- /* Sdram is setup by assembler code */
- /* If memory could be changed, we should return the true value here */
- gd->ram_size = MEM_SIZE * 1024 * 1024;
-
- return 0;
-}
-
-int checkboard(void)
-{
- u32 proc_id;
- u32 config1;
-
- proc_id = read_c0_prid();
- printf("Board: Qemu -M mips CPU: ");
- switch (proc_id) {
- case 0x00018000:
- printf("4Kc");
- break;
- case 0x00018400:
- printf("4KEcR1");
- break;
- case 0x00019000:
- printf("4KEc");
- break;
- case 0x00019300:
- config1 = read_c0_config1();
- if (config1 & 1)
- printf("24Kf");
- else
- printf("24Kc");
- break;
- case 0x00019500:
- printf("34Kf");
- break;
- case 0x00000400:
- printf("R4000");
- break;
- case 0x00018100:
- config1 = read_c0_config1();
- if (config1 & 1)
- printf("5Kf");
- else
- printf("5Kc");
- break;
- case 0x000182a0:
- printf("20Kc");
- break;
-
- default:
- printf("unknown");
- }
- printf(" proc_id=0x%x\n", proc_id);
-
- return 0;
-}
-
-int misc_init_r(void)
-{
- set_io_port_base(0);
- return 0;
-}
-
-int board_eth_init(struct bd_info *bis)
-{
- return ne2k_register();
-}
+++ /dev/null
-CONFIG_MIPS=y
-CONFIG_SYS_TEXT_BASE=0xFFFFFFFFBFC00000
-CONFIG_ENV_SIZE=0x8000
-CONFIG_ENV_SECT_SIZE=0x8000
-CONFIG_TARGET_QEMU_MIPS=y
-CONFIG_CPU_MIPS64_R1=y
-CONFIG_BOOTDELAY=10
-CONFIG_MISC_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="qemu-mips64 # "
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_IDE=y
-# CONFIG_CMD_LOADB is not set
-# CONFIG_CMD_LOADS is not set
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_RARP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-# CONFIG_ISO_PARTITION is not set
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xFFFFFFFFBFFF8000
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SYS_NS16550=y
-CONFIG_LZMA=y
+++ /dev/null
-CONFIG_MIPS=y
-CONFIG_SYS_TEXT_BASE=0xFFFFFFFFBFC00000
-CONFIG_ENV_SIZE=0x8000
-CONFIG_ENV_SECT_SIZE=0x8000
-CONFIG_TARGET_QEMU_MIPS=y
-CONFIG_SYS_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS64_R1=y
-CONFIG_BOOTDELAY=10
-CONFIG_MISC_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="qemu-mips64el # "
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_IDE=y
-# CONFIG_CMD_LOADB is not set
-# CONFIG_CMD_LOADS is not set
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_RARP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-# CONFIG_ISO_PARTITION is not set
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xFFFFFFFFBFFF8000
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SYS_NS16550=y
-CONFIG_LZMA=y
+++ /dev/null
-CONFIG_MIPS=y
-CONFIG_SYS_TEXT_BASE=0xBFC00000
-CONFIG_ENV_SIZE=0x8000
-CONFIG_ENV_SECT_SIZE=0x8000
-CONFIG_TARGET_QEMU_MIPS=y
-CONFIG_BOOTDELAY=10
-CONFIG_MISC_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="qemu-mips # "
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_IDE=y
-# CONFIG_CMD_LOADB is not set
-# CONFIG_CMD_LOADS is not set
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-# CONFIG_ISO_PARTITION is not set
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xBFFF8000
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SYS_NS16550=y
-CONFIG_LZMA=y
+++ /dev/null
-CONFIG_MIPS=y
-CONFIG_SYS_TEXT_BASE=0xBFC00000
-CONFIG_ENV_SIZE=0x8000
-CONFIG_ENV_SECT_SIZE=0x8000
-CONFIG_TARGET_QEMU_MIPS=y
-CONFIG_SYS_LITTLE_ENDIAN=y
-CONFIG_BOOTDELAY=10
-CONFIG_MISC_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="qemu-mipsel # "
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_IDE=y
-# CONFIG_CMD_LOADB is not set
-# CONFIG_CMD_LOADS is not set
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-# CONFIG_ISO_PARTITION is not set
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xBFFF8000
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SYS_NS16550=y
-CONFIG_LZMA=y
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- */
-
-/*
- * This file contains the configuration parameters for qemu-mips target.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_QEMU_MIPS
-
-#define CONFIG_TIMESTAMP /* Print image info with timestamp */
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "addmisc=setenv bootargs ${bootargs} " \
- "console=ttyS0,${baudrate} " \
- "panic=1\0" \
- "bootfile=/tftpboot/vmlinux\0" \
- "load=tftp 80500000 ${u-boot}\0" \
- ""
-
-#define CONFIG_BOOTCOMMAND "bootp;bootelf"
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-#define CONFIG_DRIVER_NE2000
-#define CONFIG_DRIVER_NE2000_BASE 0xb4000300
-
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-#define CONFIG_SYS_NS16550_CLK 115200
-#define CONFIG_SYS_NS16550_COM1 0xb40003f8
-
-#ifdef CONFIG_SYS_BIG_ENDIAN
-#define CONFIG_IDE_SWAP_IO
-#endif
-
-#define CONFIG_SYS_IDE_MAXBUS 2
-#define CONFIG_SYS_ATA_IDE0_OFFSET 0x1f0
-#define CONFIG_SYS_ATA_IDE1_OFFSET 0x170
-#define CONFIG_SYS_ATA_DATA_OFFSET 0
-#define CONFIG_SYS_ATA_REG_OFFSET 0
-#define CONFIG_SYS_ATA_BASE_ADDR 0xb4000000
-
-#define CONFIG_SYS_IDE_MAXDEVICE 4
-
-/*
- * Miscellaneous configurable options
- */
-
-#define CONFIG_SYS_MALLOC_LEN (256 << 10)
-
-#define CONFIG_SYS_BOOTPARAMS_LEN 128*1024
-
-#define CONFIG_SYS_MHZ 132
-
-#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000)
-
-/* Cached addr */
-#define CONFIG_SYS_SDRAM_BASE 0x80000000
-
-/* default load address */
-#define CONFIG_SYS_LOAD_ADDR 0x81000000
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-/* The following #defines are needed to get flash environment right */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-
-#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
-
-/* We boot from this flash, selected with dip switch */
-#define CONFIG_SYS_FLASH_BASE 0xbfc00000
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 128
-
-/* Address and size of Primary Environment Sector */
-
-#define MEM_SIZE 128
-
-#endif /* __CONFIG_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- */
-
-/*
- * This file contains the configuration parameters for qemu-mips64 target.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_QEMU_MIPS
-
-#define CONFIG_TIMESTAMP /* Print image info with timestamp */
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "addmisc=setenv bootargs ${bootargs} " \
- "console=ttyS0,${baudrate} " \
- "panic=1\0" \
- "bootfile=/tftpboot/vmlinux\0" \
- "load=tftp ffffffff80500000 ${u-boot}\0" \
- ""
-
-#define CONFIG_BOOTCOMMAND "bootp;bootelf"
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-#define CONFIG_DRIVER_NE2000
-#define CONFIG_DRIVER_NE2000_BASE 0xffffffffb4000300
-
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-#define CONFIG_SYS_NS16550_CLK 115200
-#define CONFIG_SYS_NS16550_COM1 0xffffffffb40003f8
-
-#ifdef CONFIG_SYS_BIG_ENDIAN
-#define CONFIG_IDE_SWAP_IO
-#endif
-
-#define CONFIG_SYS_IDE_MAXBUS 2
-#define CONFIG_SYS_ATA_IDE0_OFFSET 0x1f0
-#define CONFIG_SYS_ATA_IDE1_OFFSET 0x170
-#define CONFIG_SYS_ATA_DATA_OFFSET 0
-#define CONFIG_SYS_ATA_REG_OFFSET 0
-#define CONFIG_SYS_ATA_BASE_ADDR 0xffffffffb4000000
-
-#define CONFIG_SYS_IDE_MAXDEVICE 4
-
-/*
- * Miscellaneous configurable options
- */
-
-#define CONFIG_SYS_MALLOC_LEN (256 << 10)
-
-#define CONFIG_SYS_BOOTPARAMS_LEN 128*1024
-
-#define CONFIG_SYS_MHZ 132
-
-#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000)
-
-/* Cached addr */
-#define CONFIG_SYS_SDRAM_BASE 0xffffffff80000000
-
-/* default load address */
-#define CONFIG_SYS_LOAD_ADDR 0xffffffff81000000
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-/* The following #defines are needed to get flash environment right */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-
-#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
-
-/* We boot from this flash, selected with dip switch */
-#define CONFIG_SYS_FLASH_BASE 0xffffffffbfc00000
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 128
-
-/* Address and size of Primary Environment Sector */
-
-#define MEM_SIZE 128
-
-#endif /* __CONFIG_H */
CONFIG_PXA_VGA
CONFIG_PXA_VIDEO
CONFIG_QBMAN_CLK_DIV
-CONFIG_QEMU_MIPS
CONFIG_QIXIS_I2C_ACCESS
CONFIG_QSPI
CONFIG_QUOTA
projects / platform / kernel / u-boot.git / commitdiff