arm64: dts: renesas: rzg2ul-smarc: Include SoM DTSI into board DTS
authorLad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Thu, 15 Sep 2022 16:52:55 +0000 (17:52 +0100)
committerGeert Uytterhoeven <geert+renesas@glider.be>
Mon, 19 Sep 2022 11:53:47 +0000 (13:53 +0200)
Move including the rzg2ul-smarc-som.dtsi from the carrier board
rzg2ul-smarc.dtsi to the actual RZ/G2UL SMARC EVK board dts
r9a07g043u11-smarc.dts. Also move the SW_SW0_DEV_SEL and
SW_ET0_EN_N macros to board dts as they are used by SoM and carrier
board DTS/I.

This is in preparation of re-using the SoM and carrier board DTSIs
for RZ/Five SMARC EVK.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220915165256.352843-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts
arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi

index 121e552..059885a 100644 (file)
@@ -6,7 +6,19 @@
  */
 
 /dts-v1/;
+
+/*
+ * DIP-Switch SW1 setting
+ * 1 : High; 0: Low
+ * SW1-2 : SW_SD0_DEV_SEL      (0: uSD; 1: eMMC)
+ * SW1-3 : SW_ET0_EN_N         (0: ETHER0; 1: CAN0, CAN1, SSI1, RSPI1)
+ * Please change below macros according to SW1 setting on the SoM
+ */
+#define SW_SW0_DEV_SEL 1
+#define SW_ET0_EN_N    1
+
 #include "r9a07g043.dtsi"
+#include "rzg2ul-smarc-som.dtsi"
 #include "rzg2ul-smarc.dtsi"
 
 / {
index f9835c1..2a1331e 100644 (file)
@@ -5,17 +5,6 @@
  * Copyright (C) 2022 Renesas Electronics Corp.
  */
 
-/*
- * DIP-Switch SW1 setting
- * 1 : High; 0: Low
- * SW1-2 : SW_SD0_DEV_SEL      (0: uSD; 1: eMMC)
- * SW1-3 : SW_ET0_EN_N         (0: ETHER0; 1: CAN0, CAN1, SSI1, RSPI1)
- * Please change below macros according to SW1 setting
- */
-#define SW_SW0_DEV_SEL 1
-#define SW_ET0_EN_N    1
-
-#include "rzg2ul-smarc-som.dtsi"
 #include "rzg2ul-smarc-pinfunction.dtsi"
 #include "rz-smarc-common.dtsi"