MPC512x: add support for ARIA board
authorWolfgang Denk <wd@denx.de>
Sat, 16 May 2009 08:47:46 +0000 (10:47 +0200)
committerWolfgang Denk <wd@denx.de>
Fri, 12 Jun 2009 18:47:16 +0000 (20:47 +0200)
ARIA is a MPC5121E based COM Express module by Dave/DENX.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: John Rigby <jcrigby@gmail.com>
MAINTAINERS
MAKEALL
Makefile
board/davedenx/aria/Makefile [new file with mode: 0644]
board/davedenx/aria/aria.c [new file with mode: 0644]
board/davedenx/aria/config.mk [new file with mode: 0644]
include/configs/aria.h [new file with mode: 0644]

index bf076b9..bba6ce9 100644 (file)
@@ -75,6 +75,8 @@ Wolfgang Denk <wd@denx.de>
        IceCube_5100    MGT5100
        IceCube_5200    MPC5200
 
+       ARIA            MPC5121e
+
        AMX860          MPC860
        ETX094          MPC850
        FPS850L         MPC850
diff --git a/MAKEALL b/MAKEALL
index 0e5f315..fd31252 100755 (executable)
--- a/MAKEALL
+++ b/MAKEALL
@@ -77,6 +77,7 @@ LIST_5xxx="           \
 #########################################################################
 
 LIST_512x="            \
+       aria            \
        mpc5121ads      \
 "
 
index a43617e..3c9d853 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -821,6 +821,9 @@ v38b_config: unconfig
 ## MPC512x Systems
 #########################################################################
 
+aria_config:   unconfig
+       @$(MKCONFIG) -a aria ppc mpc512x aria davedenx
+
 mpc5121ads_config \
 mpc5121ads_rev2_config \
        : unconfig
@@ -830,7 +833,6 @@ mpc5121ads_rev2_config      \
        fi
        @$(MKCONFIG) -a mpc5121ads ppc mpc512x mpc5121ads freescale
 
-
 #########################################################################
 ## MPC8xx Systems
 #########################################################################
diff --git a/board/davedenx/aria/Makefile b/board/davedenx/aria/Makefile
new file mode 100644 (file)
index 0000000..2e3d73a
--- /dev/null
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2009 Wolfgang Denk <wd@denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB    = $(obj)lib$(BOARD).a
+
+COBJS-y        := $(BOARD).o
+
+COBJS  := $(COBJS-y)
+SRCS   := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS   := $(addprefix $(obj),$(COBJS))
+SOBJS  := $(addprefix $(obj),$(SOBJS))
+
+$(LIB):        $(obj).depend $(OBJS)
+       $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+       rm -f $(SOBJS) $(OBJS)
+
+distclean:     clean
+       rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/davedenx/aria/aria.c b/board/davedenx/aria/aria.c
new file mode 100644 (file)
index 0000000..f44c352
--- /dev/null
@@ -0,0 +1,316 @@
+/*
+ * (C) Copyright 2009 Wolfgang Denk <wd@denx.de>
+ * (C) Copyright 2009 Dave Srl www.dave.eu
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <asm/bitops.h>
+#include <command.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <fdt_support.h>
+#ifdef CONFIG_MISC_INIT_R
+#include <i2c.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern int mpc5121_diu_init(void);
+extern void ide_set_reset(int idereset);
+
+/* Clocks in use */
+#define SCCR1_CLOCKS_EN        (CLOCK_SCCR1_CFG_EN |                           \
+                        CLOCK_SCCR1_LPC_EN |                           \
+                        CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) |       \
+                        CLOCK_SCCR1_PSCFIFO_EN |                       \
+                        CLOCK_SCCR1_DDR_EN |                           \
+                        CLOCK_SCCR1_FEC_EN |                           \
+                        CLOCK_SCCR1_PATA_EN |                          \
+                        CLOCK_SCCR1_PCI_EN |                           \
+                        CLOCK_SCCR1_TPR_EN)
+
+#define SCCR2_CLOCKS_EN        (CLOCK_SCCR2_MEM_EN |           \
+                        CLOCK_SCCR2_SPDIF_EN |         \
+                        CLOCK_SCCR2_DIU_EN |           \
+                        CLOCK_SCCR2_I2C_EN)
+
+#define CSAW_START(start)      ((start) & 0xFFFF0000)
+#define CSAW_STOP(start, size) (((start) + (size) - 1) >> 16)
+
+long int fixed_sdram(void);
+
+int board_early_init_f(void)
+{
+       volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+       u32 spridr;
+
+       /*
+        * Initialize Local Window for the On Board FPGA access
+        */
+       out_be32(&im->sysconf.lpcs2aw,
+               CSAW_START(CONFIG_SYS_ARIA_FPGA_BASE) |
+               CSAW_STOP(CONFIG_SYS_ARIA_FPGA_BASE, CONFIG_SYS_ARIA_FPGA_SIZE)
+       );
+       out_be32(&im->lpc.cs_cfg[2], CONFIG_SYS_CS2_CFG);
+
+       /*
+        * According to MPC5121e RM, configuring local access windows should
+        * be followed by a dummy read of the config register that was
+        * modified last and an isync
+        */
+       in_be32(&im->sysconf.lpcs2aw);
+       __asm__ __volatile__ ("isync");
+
+       /*
+        * Initialize Local Window for the On Board SRAM access
+        */
+       out_be32(&im->sysconf.lpcs6aw,
+               CSAW_START(CONFIG_SYS_ARIA_SRAM_BASE) |
+               CSAW_STOP(CONFIG_SYS_ARIA_SRAM_BASE, CONFIG_SYS_ARIA_SRAM_SIZE)
+       );
+       out_be32(&im->lpc.cs_cfg[6], CONFIG_SYS_CS6_CFG);
+
+       /*
+        * According to MPC5121e RM, configuring local access windows should
+        * be followed by a dummy read of the config register that was
+        * modified last and an isync
+        */
+       in_be32(&im->sysconf.lpcs6aw);
+       __asm__ __volatile__ ("isync");
+
+       /*
+        * Configure Flash Speed
+        */
+       out_be32(&im->lpc.cs_cfg[0], CONFIG_SYS_CS0_CFG);
+
+       spridr = in_be32(&im->sysconf.spridr);
+
+       if (SVR_MJREV(spridr) >= 2)
+               out_be32(&im->lpc.altr, CONFIG_SYS_CS_ALETIMING);
+
+       /*
+        * Enable clocks
+        */
+       out_be32(&im->clk.sccr[0], SCCR1_CLOCKS_EN);
+       out_be32(&im->clk.sccr[1], SCCR2_CLOCKS_EN);
+#if defined(CONFIG_IIM) || defined(CONFIG_CMD_FUSE)
+       setbits_be32(&im->clk.sccr[1], CLOCK_SCCR2_IIM_EN);
+#endif
+
+       return 0;
+}
+
+phys_size_t initdram (int board_type)
+{
+       return fixed_sdram();
+}
+
+/*
+ * fixed sdram init:
+ * The board doesn't use memory modules that have serial presence
+ * detect or similar mechanism for discovery of the DRAM settings
+ */
+long int fixed_sdram (void)
+{
+       volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+       u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024;
+       u32 msize_log2 = __ilog2(msize);
+       u32 i;
+
+       /* Initialize IO Control */
+       out_be32(&im->io_ctrl.io_control_mem, IOCTRL_MUX_DDR);
+
+       /* Initialize DDR Local Window */
+       out_be32(&im->sysconf.ddrlaw.bar, CONFIG_SYS_DDR_BASE & 0xFFFFF000);
+       out_be32(&im->sysconf.ddrlaw.ar, msize_log2 - 1);
+
+       /*
+        * According to MPC5121e RM, configuring local access windows should
+        * be followed by a dummy read of the config register that was
+        * modified last and an isync
+        */
+       in_be32(&im->sysconf.ddrlaw.ar);
+       __asm__ __volatile__ ("isync");
+
+       /* Enable DDR */
+       out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG_EN);
+
+       /* Initialize DDR Priority Manager */
+       out_be32(&im->mddrc.prioman_config1, CONFIG_SYS_MDDRCGRP_PM_CFG1);
+       out_be32(&im->mddrc.prioman_config2, CONFIG_SYS_MDDRCGRP_PM_CFG2);
+       out_be32(&im->mddrc.hiprio_config, CONFIG_SYS_MDDRCGRP_HIPRIO_CFG);
+       out_be32(&im->mddrc.lut_table0_main_upper, CONFIG_SYS_MDDRCGRP_LUT0_MU);
+       out_be32(&im->mddrc.lut_table0_main_lower, CONFIG_SYS_MDDRCGRP_LUT0_ML);
+       out_be32(&im->mddrc.lut_table1_main_upper, CONFIG_SYS_MDDRCGRP_LUT1_MU);
+       out_be32(&im->mddrc.lut_table1_main_lower, CONFIG_SYS_MDDRCGRP_LUT1_ML);
+       out_be32(&im->mddrc.lut_table2_main_upper, CONFIG_SYS_MDDRCGRP_LUT2_MU);
+       out_be32(&im->mddrc.lut_table2_main_lower, CONFIG_SYS_MDDRCGRP_LUT2_ML);
+       out_be32(&im->mddrc.lut_table3_main_upper, CONFIG_SYS_MDDRCGRP_LUT3_MU);
+       out_be32(&im->mddrc.lut_table3_main_lower, CONFIG_SYS_MDDRCGRP_LUT3_ML);
+       out_be32(&im->mddrc.lut_table4_main_upper, CONFIG_SYS_MDDRCGRP_LUT4_MU);
+       out_be32(&im->mddrc.lut_table4_main_lower, CONFIG_SYS_MDDRCGRP_LUT4_ML);
+       out_be32(&im->mddrc.lut_table0_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT0_AU);
+       out_be32(&im->mddrc.lut_table0_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT0_AL);
+       out_be32(&im->mddrc.lut_table1_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT1_AU);
+       out_be32(&im->mddrc.lut_table1_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT1_AL);
+       out_be32(&im->mddrc.lut_table2_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT2_AU);
+       out_be32(&im->mddrc.lut_table2_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT2_AL);
+       out_be32(&im->mddrc.lut_table3_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT3_AU);
+       out_be32(&im->mddrc.lut_table3_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT3_AL);
+       out_be32(&im->mddrc.lut_table4_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT4_AU);
+       out_be32(&im->mddrc.lut_table4_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT4_AL);
+
+       /* Initialize MDDRC */
+       out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG);
+       out_be32(&im->mddrc.ddr_time_config0, CONFIG_SYS_MDDRC_TIME_CFG0);
+       out_be32(&im->mddrc.ddr_time_config1, CONFIG_SYS_MDDRC_TIME_CFG1);
+       out_be32(&im->mddrc.ddr_time_config2, CONFIG_SYS_MDDRC_TIME_CFG2);
+
+       /* Initialize DDR */
+       for (i = 0; i < 10; i++)
+               out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
+
+       out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL);
+       out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
+       out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH);
+       out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
+       out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH);
+       out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
+       out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP);
+       out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
+       out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM2);
+       out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
+       out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL);
+       out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM2);
+       out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM3);
+       out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EN_DLL);
+       out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP);
+       out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL);
+       out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH);
+       out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP);
+       out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_OCD_DEFAULT);
+       out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL);
+       out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
+
+       /* Start MDDRC */
+       out_be32(&im->mddrc.ddr_time_config0, CONFIG_SYS_MDDRC_TIME_CFG0_RUN);
+       out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG_RUN);
+
+       return msize;
+}
+
+int misc_init_r(void)
+{
+       u32 tmp;
+
+       /* we use I2C-2 for on-board eeprom */
+       i2c_set_bus_num(2);
+
+       tmp = in_be32((u32*)CONFIG_SYS_ARIA_FPGA_BASE);
+       printf("FPGA:  %u-%u.%u.%u\n",
+               (tmp & 0xFF000000) >> 24,
+               (tmp & 0x00FF0000) >> 16,
+               (tmp & 0x0000FF00) >>  8,
+                tmp & 0x000000FF
+       );
+
+#ifdef CONFIG_FSL_DIU_FB
+# if   !(defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE))
+       mpc5121_diu_init();
+# endif
+#endif
+       return 0;
+}
+
+static  iopin_t ioregs_init[] = {
+       /*
+        * FEC
+        */
+
+       /* FEC on PSCx_x*/
+       {
+               offsetof(struct ioctrl512x, io_control_psc0_0), 5, 0,
+               IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+               IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+       },
+       {
+               offsetof(struct ioctrl512x, io_control_psc1_0), 10, 0,
+               IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+               IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+       },
+       {
+               offsetof(struct ioctrl512x, io_control_spdif_txclk), 3, 0,
+               IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+               IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+       },
+
+       /*
+        * DIU
+        */
+       /* FUNC2=DIU CLK */
+       {
+               offsetof(struct ioctrl512x, io_control_psc6_0), 1, 0,
+               IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+               IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
+       },
+       /* FUNC2=DIU_HSYNC */
+       {
+               offsetof(struct ioctrl512x, io_control_psc6_1), 1, 0,
+               IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+               IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+       },
+       /* FUNC2=DIUVSYNC Sets Next 26 to DIU Pads */
+       {
+               offsetof(struct ioctrl512x, io_control_psc6_4), 26, 0,
+               IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+               IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+       },
+       /*
+        * On board SRAM
+        */
+       /* FUNC2=/LPC CS6 */
+       {
+               offsetof(struct ioctrl512x, io_control_j1850_rx), 1, 0,
+               IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+               IO_PIN_PUE(1) | IO_PIN_ST(1) | IO_PIN_DS(3)
+       },
+};
+
+
+int checkboard (void)
+{
+       puts("Board: ARIA\n");
+
+       /* initialize function mux & slew rate IO inter alia on IO Pins  */
+
+       iopin_initialize(ioregs_init, ARRAY_SIZE(ioregs_init));
+
+       return 0;
+}
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+       ft_cpu_setup(blob, bd);
+       fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
+}
+#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
diff --git a/board/davedenx/aria/config.mk b/board/davedenx/aria/config.mk
new file mode 100644 (file)
index 0000000..838a018
--- /dev/null
@@ -0,0 +1,23 @@
+#
+# (C) Copyright 2009 Wolfgang Denk <wd@denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE  =   0xFFF00000
diff --git a/include/configs/aria.h b/include/configs/aria.h
new file mode 100644 (file)
index 0000000..58f67a4
--- /dev/null
@@ -0,0 +1,554 @@
+/*
+ * (C) Copyright 2009 Wolfgang Denk <wd@denx.de>
+ * (C) Copyright 2009, DAVE Srl <www.dave.eu>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Aria board configuration file
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_ARIA 1
+/*
+ * Memory map for the ARIA board:
+ *
+ * 0x0000_0000-0x0FFF_FFFF     DDR RAM (256 MB)
+ * 0x3000_0000-0x3001_FFFF     On Chip SRAM (128 KB)
+ * 0x3010_0000-0x3011_FFFF     On Board SRAM (128 KB) - CS6
+ * 0x3020_0000-0x3021_FFFF     FPGA (128 KB) - CS2
+ * 0x8000_0000-0x803F_FFFF     IMMR (4 MB)
+ * 0x8400_0000-0x82FF_FFFF     PCI I/O space (16 MB)
+ * 0xA000_0000-0xAFFF_FFFF     PCI memory space (256 MB)
+ * 0xB000_0000-0xBFFF_FFFF     PCI memory mapped I/O space (256 MB)
+ * 0xFC00_0000-0xFFFF_FFFF     NOR Boot FLASH (64 MB)
+ */
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_E300            1       /* E300 Family */
+#define CONFIG_MPC512X         1       /* MPC512X family */
+#define CONFIG_FSL_DIU_FB      1       /* FSL DIU */
+#define CONFIG_FSL_DIU_LOGO_BMP        1       /* Don't include FSL DIU binary bmp */
+
+/* video */
+#undef CONFIG_VIDEO
+
+#if defined(CONFIG_VIDEO)
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#endif
+
+/* CONFIG_PCI is defined at config time */
+
+#define CONFIG_SYS_MPC512X_CLKIN       33000000        /* in Hz */
+
+#define CONFIG_BOARD_EARLY_INIT_F              /* call board_early_init_f() */
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_SYS_IMMR                        0x80000000
+#define CONFIG_SYS_DIU_ADDR            (CONFIG_SYS_IMMR+0x2100)
+
+#define CONFIG_SYS_MEMTEST_START       0x00200000      /* memtest region */
+#define CONFIG_SYS_MEMTEST_END         0x00400000
+
+/*
+ * DDR Setup - manually set all parameters as there's no SPD etc.
+ */
+#define CONFIG_SYS_DDR_SIZE            256             /* MB */
+#define CONFIG_SYS_DDR_BASE            0x00000000
+#define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_BASE
+
+/* DDR Controller Configuration
+ *
+ * SYS_CFG:
+ *     [31:31] MDDRC Soft Reset:       Diabled
+ *     [30:30] DRAM CKE pin:           Enabled
+ *     [29:29] DRAM CLK:               Enabled
+ *     [28:28] Command Mode:           Enabled (For initialization only)
+ *     [27:25] DRAM Row Select:        dram_row[15:0] = magenta_address[25:10]
+ *     [24:21] DRAM Bank Select:       dram_bank[1:0] = magenta_address[11:10]
+ *     [20:19] Read Test:              DON'T USE
+ *     [18:18] Self Refresh:           Enabled
+ *     [17:17] 16bit Mode:             Disabled
+ *     [16:13] Ready Delay:            2
+ *     [12:12] Half DQS Delay:         Disabled
+ *     [11:11] Quarter DQS Delay:      Disabled
+ *     [10:08] Write Delay:            2
+ *     [07:07] Early ODT:              Disabled
+ *     [06:06] On DIE Termination:     Disabled
+ *     [05:05] FIFO Overflow Clear:    DON'T USE here
+ *     [04:04] FIFO Underflow Clear:   DON'T USE here
+ *     [03:03] FIFO Overflow Pending:  DON'T USE here
+ *     [02:02] FIFO Underlfow Pending: DON'T USE here
+ *     [01:01] FIFO Overlfow Enabled:  Enabled
+ *     [00:00] FIFO Underflow Enabled: Enabled
+ * TIME_CFG0
+ *     [31:16] DRAM Refresh Time:      0 CSB clocks
+ *     [15:8]  DRAM Command Time:      0 CSB clocks
+ *     [07:00] DRAM Precharge Time:    0 CSB clocks
+ * TIME_CFG1
+ *     [31:26] DRAM tRFC:
+ *     [25:21] DRAM tWR1:
+ *     [20:17] DRAM tWRT1:
+ *     [16:11] DRAM tDRR:
+ *     [10:05] DRAM tRC:
+ *     [04:00] DRAM tRAS:
+ * TIME_CFG2
+ *     [31:28] DRAM tRCD:
+ *     [27:23] DRAM tFAW:
+ *     [22:19] DRAM tRTW1:
+ *     [18:15] DRAM tCCD:
+ *     [14:10] DRAM tRTP:
+ *     [09:05] DRAM tRP:
+ *     [04:00] DRAM tRPA
+ */
+#define CONFIG_SYS_MDDRC_SYS_CFG       0xF8604A00
+#define CONFIG_SYS_MDDRC_SYS_CFG_RUN   0xE8604A00
+/*#define CONFIG_SYS_MDDRC_TIME_CFG1   0x54EC1168 */
+  #define CONFIG_SYS_MDDRC_TIME_CFG1   0x55D81189
+/*#define CONFIG_SYS_MDDRC_TIME_CFG2   0x35210864 */
+  #define CONFIG_SYS_MDDRC_TIME_CFG2   0x34790863
+
+#define CONFIG_SYS_MDDRC_SYS_CFG_EN    0xF0000000
+#define CONFIG_SYS_MDDRC_TIME_CFG0     0x00003D2E
+/*#define CONFIG_SYS_MDDRC_TIME_CFG0_RUN       0x06183D2E */
+#define CONFIG_SYS_MDDRC_TIME_CFG0_RUN 0x030C3D2E
+
+#define CONFIG_SYS_MICRON_NOP          0x01380000
+#define CONFIG_SYS_MICRON_PCHG_ALL     0x01100400
+#define CONFIG_SYS_MICRON_EM2          0x01020000
+#define CONFIG_SYS_MICRON_EM3          0x01030000
+#define CONFIG_SYS_MICRON_EN_DLL       0x01010000
+#define CONFIG_SYS_MICRON_RFSH         0x01080000
+#define CONFIG_SYS_MICRON_INIT_DEV_OP  0x01000432
+#define CONFIG_SYS_MICRON_OCD_DEFAULT  0x01010780
+
+/* DDR Priority Manager Configuration */
+#define CONFIG_SYS_MDDRCGRP_PM_CFG1    0x00077777
+#define CONFIG_SYS_MDDRCGRP_PM_CFG2    0x00000000
+#define CONFIG_SYS_MDDRCGRP_HIPRIO_CFG 0x00000001
+#define CONFIG_SYS_MDDRCGRP_LUT0_MU    0xFFEEDDCC
+#define CONFIG_SYS_MDDRCGRP_LUT0_ML    0xBBAAAAAA
+#define CONFIG_SYS_MDDRCGRP_LUT1_MU    0x66666666
+#define CONFIG_SYS_MDDRCGRP_LUT1_ML    0x55555555
+#define CONFIG_SYS_MDDRCGRP_LUT2_MU    0x44444444
+#define CONFIG_SYS_MDDRCGRP_LUT2_ML    0x44444444
+#define CONFIG_SYS_MDDRCGRP_LUT3_MU    0x55555555
+#define CONFIG_SYS_MDDRCGRP_LUT3_ML    0x55555558
+#define CONFIG_SYS_MDDRCGRP_LUT4_MU    0x11111111
+#define CONFIG_SYS_MDDRCGRP_LUT4_ML    0x11111122
+#define CONFIG_SYS_MDDRCGRP_LUT0_AU    0xaaaaaaaa
+#define CONFIG_SYS_MDDRCGRP_LUT0_AL    0xaaaaaaaa
+#define CONFIG_SYS_MDDRCGRP_LUT1_AU    0x66666666
+#define CONFIG_SYS_MDDRCGRP_LUT1_AL    0x66666666
+#define CONFIG_SYS_MDDRCGRP_LUT2_AU    0x11111111
+#define CONFIG_SYS_MDDRCGRP_LUT2_AL    0x11111111
+#define CONFIG_SYS_MDDRCGRP_LUT3_AU    0x11111111
+#define CONFIG_SYS_MDDRCGRP_LUT3_AL    0x11111111
+#define CONFIG_SYS_MDDRCGRP_LUT4_AU    0x11111111
+#define CONFIG_SYS_MDDRCGRP_LUT4_AL    0x11111111
+
+/*
+ * NOR FLASH on the Local Bus
+ */
+#define CONFIG_SYS_FLASH_CFI                           /* use the CFI code */
+#define CONFIG_FLASH_CFI_DRIVER                                /* use the CFI driver */
+#define CONFIG_SYS_FLASH_BASE          0xF8000000      /* start of FLASH */
+#define CONFIG_SYS_FLASH_SIZE          0x08000000      /* max flash size */
+
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#define CONFIG_SYS_MAX_FLASH_BANKS     1               /* number of banks */
+#define CONFIG_SYS_FLASH_BANKS_LIST    {CONFIG_SYS_FLASH_BASE}
+#define CONFIG_SYS_MAX_FLASH_SECT      1024            /* max sectors */
+
+#undef CONFIG_SYS_FLASH_CHECKSUM
+
+#define CONFIG_SYS_SRAM_BASE           0x30000000
+#define CONFIG_SYS_SRAM_SIZE           0x00020000      /* 128 KB */
+
+#define CONFIG_SYS_ARIA_SRAM_BASE      0x30020000
+#define CONFIG_SYS_ARIA_SRAM_SIZE      0x20000         /* 128 KB */
+
+#define CONFIG_SYS_ARIA_FPGA_BASE      (CONFIG_SYS_ARIA_SRAM_BASE + \
+                                        CONFIG_SYS_ARIA_SRAM_SIZE)
+#define CONFIG_SYS_ARIA_FPGA_SIZE      0x20000         /* 128 KB */
+
+#define CONFIG_SYS_CS0_CFG             0x05059150
+#define CONFIG_SYS_CS2_CFG             (       (5 << 24) | \
+                                               (5 << 16) | \
+                                               (1 << 15) | \
+                                               (0 << 14) | \
+                                               (0 << 13) | \
+                                               (1 << 12) | \
+                                               (0 << 10) | \
+                                               (3 <<  8) | /* 32 bit */ \
+                                               (0 <<  7) | \
+                                               (1 <<  6) | \
+                                               (1 <<  4) | \
+                                               (0 <<  3) | \
+                                               (0 <<  2) | \
+                                               (0 <<  1) | \
+                                               (0 <<  0)   \
+                                       )
+#define CONFIG_SYS_CS6_CFG             0x05059150
+
+/* Use alternative CS timing for CS0 and CS2 */
+#define CONFIG_SYS_CS_ALETIMING        0x00000005
+
+/* Use SRAM for initial stack */
+#define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_SRAM_BASE
+#define CONFIG_SYS_INIT_RAM_END                CONFIG_SYS_SRAM_SIZE
+
+#define CONFIG_SYS_GBL_DATA_SIZE       0x100
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - \
+                                        CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
+
+#define CONFIG_SYS_MONITOR_BASE                TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN         (256 * 1024)
+
+#ifdef CONFIG_FSL_DIU_FB
+#define CONFIG_SYS_MALLOC_LEN          (6 * 1024 * 1024)
+#else
+#define CONFIG_SYS_MALLOC_LEN          (512 * 1024)
+#endif
+
+/* FPGA */
+#define CONFIG_ARIA_FPGA               1
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX              1
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_PSC_CONSOLE             3       /* console on PSC3 */
+#if CONFIG_PSC_CONSOLE != 3
+#error CONFIG_PSC_CONSOLE must be 3
+#endif
+
+#define CONFIG_BAUDRATE                        115200  /* ... at 115200 bps */
+#define CONFIG_SYS_BAUDRATE_TABLE  \
+       {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
+#define CONSOLE_FIFO_TX_SIZE           FIFOC_PSC3_TX_SIZE
+#define CONSOLE_FIFO_TX_ADDR           FIFOC_PSC3_TX_ADDR
+#define CONSOLE_FIFO_RX_SIZE           FIFOC_PSC3_RX_SIZE
+#define CONSOLE_FIFO_RX_ADDR           FIFOC_PSC3_RX_ADDR
+
+#define CONFIG_CMDLINE_EDITING         1       /* command line history */
+/* Use the HUSH parser */
+#define CONFIG_SYS_HUSH_PARSER
+#ifdef  CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
+#endif
+
+/*
+ * PCI
+ */
+#ifdef CONFIG_PCI
+
+#define CONFIG_SYS_PCI_MEM_BASE                0xA0000000
+#define CONFIG_SYS_PCI_MEM_PHYS                CONFIG_SYS_PCI_MEM_BASE
+#define CONFIG_SYS_PCI_MEM_SIZE                0x10000000      /* 256M */
+#define CONFIG_SYS_PCI_MMIO_BASE       (CONFIG_SYS_PCI_MEM_BASE + \
+                                        CONFIG_SYS_PCI_MEM_SIZE)
+#define CONFIG_SYS_PCI_MMIO_PHYS       CONFIG_SYS_PCI_MMIO_BASE
+#define CONFIG_SYS_PCI_MMIO_SIZE       0x10000000      /* 256M */
+#define CONFIG_SYS_PCI_IO_BASE         0x00000000
+#define CONFIG_SYS_PCI_IO_PHYS         0x84000000
+#define CONFIG_SYS_PCI_IO_SIZE         0x01000000      /* 16M */
+
+#define CONFIG_PCI_PNP                 /* do pci plug-and-play */
+
+#define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup */
+
+#endif
+
+/* I2C */
+#define CONFIG_HARD_I2C                        /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C                 /* so disable bit-banged I2C */
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_I2C_CMD_TREE
+
+/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SPEED           100000
+#define CONFIG_SYS_I2C_SLAVE           0x7F
+#if 0
+#define CONFIG_SYS_I2C_NOPROBES        {{0,0x69}}      /* Don't probe these addrs */
+#endif
+
+/*
+ * IIM - IC Identification Module
+ */
+#undef CONFIG_IIM
+
+/*
+ * EEPROM configuration for Atmel AT24C32A-10TQ-2.7:
+ * 16-bit addresses, 10ms write delay, 32-Byte Page Write Mode
+ */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         2
+#define CONFIG_SYS_I2C_EEPROM_ADDR             0x50
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      5
+
+/*
+ * Ethernet configuration
+ */
+#define CONFIG_MPC512x_FEC             1
+#define CONFIG_NET_MULTI
+#define CONFIG_PHY_ADDR                        0x17
+#define CONFIG_MII                     1       /* MII PHY management */
+#define CONFIG_FEC_AN_TIMEOUT          1
+#define CONFIG_HAS_ETH0
+
+/*
+ * Environment
+ */
+#define CONFIG_ENV_IS_IN_FLASH 1
+/* This has to be a multiple of the flash sector size */
+#define CONFIG_ENV_ADDR                        (CONFIG_SYS_MONITOR_BASE + \
+                                        CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_ENV_SIZE                        0x2000
+#define CONFIG_ENV_SECT_SIZE           0x20000 /* one sector (256K) */
+
+/* Address and size of Redundant Environment Sector    */
+#define CONFIG_ENV_ADDR_REDUND         (CONFIG_ENV_ADDR + \
+                                        CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND         (CONFIG_ENV_SIZE)
+
+#define CONFIG_LOADS_ECHO              1
+#define CONFIG_SYS_LOADS_BAUD_CHANGE   1
+
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_FUSE
+#define CONFIG_CMD_I2C
+#undef CONFIG_CMD_IDE
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+
+#if defined(CONFIG_PCI)
+#define CONFIG_CMD_PCI
+#endif
+
+#if defined(CONFIG_CMD_IDE)
+#define CONFIG_DOS_PARTITION
+#define CONFIG_MAC_PARTITION
+#define CONFIG_ISO_PARTITION
+#endif /* defined(CONFIG_CMD_IDE) */
+
+/*
+ * Watchdog timeout = CONFIG_SYS_WATCHDOG_VALUE * 65536 / IPS clock.
+ * For example, when IPS is set to 66MHz and CONFIG_SYS_WATCHDOG_VALUE
+ * is set to 0xFFFF, watchdog timeouts after about 64s. For details
+ * refer to chapter 36 of the MPC5121e Reference Manual.
+ */
+/* #define CONFIG_WATCHDOG */          /* enable watchdog */
+#define CONFIG_SYS_WATCHDOG_VALUE 0xFFFF
+
+ /*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP                    /* undef to save memory */
+#define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
+#define CONFIG_SYS_PROMPT      "=> "           /* Monitor Command Prompt */
+
+#ifdef CONFIG_CMD_KGDB
+# define CONFIG_SYS_CBSIZE     1024            /* Console I/O Buffer Size */
+#else
+# define CONFIG_SYS_CBSIZE     256             /* Console I/O Buffer Size */
+#endif
+
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE      (CONFIG_SYS_CBSIZE + \
+                                sizeof(CONFIG_SYS_PROMPT) + 16)
+/* max number of command args */
+#define CONFIG_SYS_MAXARGS     32
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE
+
+#define CONFIG_SYS_HZ          1000
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_SYS_BOOTMAPSZ   (8 << 20)
+
+/* Cache Configuration */
+#define CONFIG_SYS_DCACHE_SIZE         32768
+#define CONFIG_SYS_CACHELINE_SIZE      32
+#ifdef CONFIG_CMD_KGDB
+#define CONFIG_SYS_CACHELINE_SHIFT     5       /* log base 2 of 32 */
+#endif
+
+#define CONFIG_SYS_HID0_INIT           0x000000000
+#define CONFIG_SYS_HID0_FINAL          (HID0_ENABLE_MACHINE_CHECK | \
+                                        HID0_ICE)
+#define CONFIG_SYS_HID2        HID2_HBE
+
+#define CONFIG_HIGH_BATS               1       /* High BATs supported */
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD                  0x01
+#define BOOTFLAG_WARM                  0x02
+
+#ifdef CONFIG_CMD_KGDB
+#define CONFIG_KGDB_BAUDRATE           230400  /* speed of kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX          2       /* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_TIMESTAMP
+
+#define CONFIG_HOSTNAME                        aria
+#define CONFIG_BOOTFILE                        aria/uImage
+#define CONFIG_ROOTPATH                        /opt/eldk/ppc_6xx
+
+#define CONFIG_LOADADDR                        400000  /* default load addr */
+
+#define CONFIG_BOOTDELAY       5       /* -1 disables auto-boot */
+#undef  CONFIG_BOOTARGS                        /* the boot command will set bootargs */
+
+#define CONFIG_BAUDRATE                115200
+
+#define CONFIG_PREBOOT "echo;" \
+       "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
+       "echo"
+
+#define        CONFIG_EXTRA_ENV_SETTINGS                                       \
+       "u-boot_addr_r=200000\0"                                        \
+       "kernel_addr_r=600000\0"                                        \
+       "fdt_addr_r=880000\0"                                           \
+       "ramdisk_addr_r=900000\0"                                       \
+       "u-boot_addr=FFF00000\0"                                        \
+       "kernel_addr=FFC40000\0"                                        \
+       "fdt_addr=FFEC0000\0"                                           \
+       "ramdisk_addr=FC040000\0"                                       \
+       "ramdiskfile=aria/uRamdisk\0"                           \
+       "u-boot=aria/u-boot.bin\0"                                      \
+       "fdtfile=aria/aria.dtb\0"                                       \
+       "netdev=eth0\0"                                                 \
+       "consdev=ttyPSC0\0"                                             \
+       "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
+               "nfsroot=${serverip}:${rootpath}\0"                     \
+       "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
+       "addip=setenv bootargs ${bootargs} "                            \
+               "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
+               ":${hostname}:${netdev}:off panic=1\0"                  \
+       "addtty=setenv bootargs ${bootargs} "                           \
+               "console=${consdev},${baudrate}\0"                      \
+       "flash_nfs=run nfsargs addip addtty;"                           \
+               "bootm ${kernel_addr} - ${fdt_addr}\0"                  \
+       "flash_self=run ramargs addip addtty;"                          \
+               "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"    \
+       "net_nfs=tftp ${kernel_addr_r} ${bootfile};"                    \
+               "tftp ${fdt_addr_r} ${fdtfile};"                        \
+               "run nfsargs addip addtty;"                             \
+               "bootm ${kernel_addr_r} - ${fdt_addr_r}\0"              \
+       "net_self=tftp ${kernel_addr_r} ${bootfile};"                   \
+               "tftp ${ramdisk_addr_r} ${ramdiskfile};"                \
+               "tftp ${fdt_addr_r} ${fdtfile};"                        \
+               "run ramargs addip addtty;"                             \
+               "bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}\0"\
+       "load=tftp ${u-boot_addr_r} ${u-boot}\0"                        \
+       "update=protect off ${u-boot_addr} +${filesize};"               \
+               "era ${u-boot_addr} +${filesize};"                      \
+               "cp.b ${u-boot_addr_r} ${u-boot_addr} ${filesize}\0"    \
+       "upd=run load update\0"                                         \
+       ""
+
+#define CONFIG_BOOTCOMMAND     "run flash_self"
+
+#define CONFIG_OF_LIBFDT       1
+#define CONFIG_OF_BOARD_SETUP  1
+#define CONFIG_OF_SUPPORT_OLD_DEVICE_TREES     1
+
+#define OF_CPU                 "PowerPC,5121@0"
+#define OF_SOC_COMPAT          "fsl,mpc5121-immr"
+#define OF_TBCLK               (bd->bi_busfreq / 4)
+#define OF_STDOUT_PATH         "/soc@80000000/serial@11300"
+
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff
+ *-----------------------------------------------------------------------
+ */
+
+#undef  CONFIG_IDE_8xx_PCCARD          /* Use IDE with PC Card Adapter */
+#undef CONFIG_IDE_8xx_DIRECT           /* Direct IDE    not supported  */
+#undef CONFIG_IDE_LED                  /* LED   for IDE not supported  */
+
+#define CONFIG_IDE_RESET               /* reset for IDE supported      */
+#define CONFIG_IDE_PREINIT
+
+#define CONFIG_SYS_IDE_MAXBUS          1       /* 1 IDE bus            */
+#define CONFIG_SYS_IDE_MAXDEVICE       2       /* 1 drive per IDE bus  */
+
+#define CONFIG_SYS_ATA_IDE0_OFFSET     0x0000
+#define CONFIG_SYS_ATA_BASE_ADDR       get_pata_base()
+
+/* Offset for data I/O                 RefMan MPC5121EE Table 28-10    */
+#define CONFIG_SYS_ATA_DATA_OFFSET     (0x00A0)
+
+/* Offset for normal register accesses */
+#define CONFIG_SYS_ATA_REG_OFFSET      (CONFIG_SYS_ATA_DATA_OFFSET)
+
+/* Offset for alternate registers      RefMan MPC5121EE Table 28-23    */
+#define CONFIG_SYS_ATA_ALT_OFFSET      (0x00D8)
+
+/* Interval between registers  */
+#define CONFIG_SYS_ATA_STRIDE          4
+
+#define ATA_BASE_ADDR                  get_pata_base()
+
+/*
+ * Control register bit definitions
+ */
+#define FSL_ATA_CTRL_FIFO_RST_B                0x80000000
+#define FSL_ATA_CTRL_ATA_RST_B         0x40000000
+#define FSL_ATA_CTRL_FIFO_TX_EN                0x20000000
+#define FSL_ATA_CTRL_FIFO_RCV_EN       0x10000000
+#define FSL_ATA_CTRL_DMA_PENDING       0x08000000
+#define FSL_ATA_CTRL_DMA_ULTRA         0x04000000
+#define FSL_ATA_CTRL_DMA_WRITE         0x02000000
+#define FSL_ATA_CTRL_IORDY_EN          0x01000000
+
+#endif /* __CONFIG_H */