config LIRC
bool "LIRC user interface"
- depends on RC_CORE
help
Enable this option to enable the Linux Infrared Remote
Control user interface (e.g. /dev/lirc*). This interface
menuconfig RC_DECODERS
bool "Remote controller decoders"
- depends on RC_CORE
if RC_DECODERS
config IR_NEC_DECODER
tristate "Enable IR raw decoder for the NEC protocol"
- depends on RC_CORE
select BITREVERSE
help
config IR_RC5_DECODER
tristate "Enable IR raw decoder for the RC-5 protocol"
- depends on RC_CORE
select BITREVERSE
help
config IR_RC6_DECODER
tristate "Enable IR raw decoder for the RC6 protocol"
- depends on RC_CORE
select BITREVERSE
help
config IR_JVC_DECODER
tristate "Enable IR raw decoder for the JVC protocol"
- depends on RC_CORE
select BITREVERSE
help
config IR_SONY_DECODER
tristate "Enable IR raw decoder for the Sony protocol"
- depends on RC_CORE
select BITREVERSE
help
config IR_SANYO_DECODER
tristate "Enable IR raw decoder for the Sanyo protocol"
- depends on RC_CORE
select BITREVERSE
help
config IR_SHARP_DECODER
tristate "Enable IR raw decoder for the Sharp protocol"
- depends on RC_CORE
select BITREVERSE
help
config IR_MCE_KBD_DECODER
tristate "Enable IR raw decoder for the MCE keyboard/mouse protocol"
- depends on RC_CORE
select BITREVERSE
help
config IR_XMP_DECODER
tristate "Enable IR raw decoder for the XMP protocol"
- depends on RC_CORE
select BITREVERSE
help
config IR_IMON_DECODER
tristate "Enable IR raw decoder for the iMON protocol"
- depends on RC_CORE
help
Enable this option if you have iMON PAD or Antec Veris infrared
remote control and you would like to use it with a raw IR
config IR_RCMM_DECODER
tristate "Enable IR raw decoder for the RC-MM protocol"
- depends on RC_CORE
help
Enable this option when you have IR with RC-MM protocol, and
you need the software decoder. The driver supports 12,
menuconfig RC_DEVICES
bool "Remote Controller devices"
- depends on RC_CORE
if RC_DEVICES
config RC_ATI_REMOTE
tristate "ATI / X10 based USB RF remote controls"
- depends on USB_ARCH_HAS_HCD
- depends on RC_CORE
- select USB
+ depends on USB
help
Say Y here if you want to use an X10 based USB remote control.
These are RF remotes with USB receivers.
config IR_ENE
tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)"
depends on PNP || COMPILE_TEST
- depends on RC_CORE
help
Say Y here to enable support for integrated infrared receiver
/transceiver made by ENE.
config IR_HIX5HD2
tristate "Hisilicon hix5hd2 IR remote control"
- depends on RC_CORE
depends on OF || COMPILE_TEST
help
Say Y here if you want to use hisilicon hix5hd2 remote control.
config IR_IMON
tristate "SoundGraph iMON Receiver and Display"
- depends on USB_ARCH_HAS_HCD
- depends on RC_CORE
- select USB
+ depends on USB
help
Say Y here if you want to use a SoundGraph iMON (aka Antec Veris)
IR Receiver and/or LCD/VFD/VGA display.
config IR_IMON_RAW
tristate "SoundGraph iMON Receiver (early raw IR models)"
- depends on USB_ARCH_HAS_HCD
- depends on RC_CORE
- select USB
+ depends on USB
help
Say Y here if you want to use a SoundGraph iMON IR Receiver,
early raw models.
config IR_MCEUSB
tristate "Windows Media Center Ed. eHome Infrared Transceiver"
- depends on USB_ARCH_HAS_HCD
- depends on RC_CORE
- select USB
+ depends on USB
help
Say Y here if you want to use a Windows Media Center Edition
eHome Infrared Transceiver.
config IR_ITE_CIR
tristate "ITE Tech Inc. IT8712/IT8512 Consumer Infrared Transceiver"
depends on PNP || COMPILE_TEST
- depends on RC_CORE
help
Say Y here to enable support for integrated infrared receivers
/transceivers made by ITE Tech Inc. These are found in
config IR_FINTEK
tristate "Fintek Consumer Infrared Transceiver"
depends on PNP || COMPILE_TEST
- depends on RC_CORE
help
Say Y here to enable support for integrated infrared receiver
/transceiver made by Fintek. This chip is found on assorted
config IR_MESON
tristate "Amlogic Meson IR remote receiver"
- depends on RC_CORE
depends on ARCH_MESON || COMPILE_TEST
help
Say Y if you want to use the IR remote receiver available
config IR_MTK
tristate "Mediatek IR remote receiver"
- depends on RC_CORE
depends on ARCH_MEDIATEK || COMPILE_TEST
help
Say Y if you want to use the IR remote receiver available
config IR_NUVOTON
tristate "Nuvoton w836x7hg Consumer Infrared Transceiver"
depends on PNP || COMPILE_TEST
- depends on RC_CORE
help
Say Y here to enable support for integrated infrared receiver
/transceiver made by Nuvoton (formerly Winbond). This chip is
config IR_REDRAT3
tristate "RedRat3 IR Transceiver"
- depends on USB_ARCH_HAS_HCD
- depends on RC_CORE
+ depends on USB
select NEW_LEDS
select LEDS_CLASS
- select USB
help
Say Y here if you want to use a RedRat3 Infrared Transceiver.
config IR_STREAMZAP
tristate "Streamzap PC Remote IR Receiver"
- depends on USB_ARCH_HAS_HCD
- depends on RC_CORE
- select USB
+ depends on USB
help
Say Y here if you want to use a Streamzap PC Remote
Infrared Receiver.
config IR_WINBOND_CIR
tristate "Winbond IR remote control"
depends on (X86 && PNP) || COMPILE_TEST
- depends on RC_CORE
select NEW_LEDS
select LEDS_CLASS
select BITREVERSE
config IR_IGORPLUGUSB
tristate "IgorPlug-USB IR Receiver"
- depends on USB_ARCH_HAS_HCD
- depends on RC_CORE
- select USB
+ depends on USB
help
Say Y here if you want to use the IgorPlug-USB IR Receiver by
Igor Cesko. This device is included on the Fit-PC2.
config IR_IGUANA
tristate "IguanaWorks USB IR Transceiver"
- depends on USB_ARCH_HAS_HCD
- depends on RC_CORE
- select USB
+ depends on USB
help
Say Y here if you want to use the IguanaWorks USB IR Transceiver.
Both infrared receive and send are supported. If you want to
config IR_TTUSBIR
tristate "TechnoTrend USB IR Receiver"
- depends on USB_ARCH_HAS_HCD
- depends on RC_CORE
- select USB
+ depends on USB
select NEW_LEDS
select LEDS_CLASS
help
config RC_LOOPBACK
tristate "Remote Control Loopback Driver"
- depends on RC_CORE
help
Say Y here if you want support for the remote control loopback
driver which allows TX data to be sent back as RX data.
config IR_GPIO_CIR
tristate "GPIO IR remote control"
- depends on RC_CORE
depends on (OF && GPIOLIB) || COMPILE_TEST
help
Say Y if you want to use GPIO based IR Receiver.
config IR_GPIO_TX
tristate "GPIO IR Bit Banging Transmitter"
- depends on RC_CORE
depends on LIRC
depends on (OF && GPIOLIB) || COMPILE_TEST
help
config IR_PWM_TX
tristate "PWM IR transmitter"
- depends on RC_CORE
depends on LIRC
depends on PWM
depends on OF || COMPILE_TEST
config RC_ST
tristate "ST remote control receiver"
- depends on RC_CORE
depends on ARCH_STI || COMPILE_TEST
help
Say Y here if you want support for ST remote control driver
config IR_SUNXI
tristate "SUNXI IR remote control"
- depends on RC_CORE
depends on ARCH_SUNXI || COMPILE_TEST
help
Say Y if you want to use sunXi internal IR Controller
config IR_SERIAL
tristate "Homebrew Serial Port Receiver"
- depends on RC_CORE
help
Say Y if you want to use Homebrew Serial Port Receivers and
Transceivers.
config IR_SIR
tristate "Built-in SIR IrDA port"
- depends on RC_CORE
help
Say Y if you want to use a IrDA SIR port Transceivers.
config RC_XBOX_DVD
tristate "Xbox DVD Movie Playback Kit"
- depends on RC_CORE
- depends on USB_ARCH_HAS_HCD
- select USB
+ depends on USB
help
Say Y here if you want to use the Xbox DVD Movie Playback Kit.
These are IR remotes with USB receivers for the Original Xbox (2001).
config IR_TOY
tristate "Infrared Toy and IR Droid"
- depends on RC_CORE
- depends on USB_ARCH_HAS_HCD
+ depends on USB
help
Say Y here if you want to use the Infrared Toy or IR Droid, USB
versions.