cxl/pci: Implement wait for media active
authorBen Widawsky <ben.widawsky@intel.com>
Mon, 24 Jan 2022 00:31:13 +0000 (16:31 -0800)
committerDan Williams <dan.j.williams@intel.com>
Wed, 9 Feb 2022 06:57:31 +0000 (22:57 -0800)
CXL 2.0 8.1.3.8.2 states:

  Memory_Active: When set, indicates that the CXL Range 1 memory is
  fully initialized and available for software use. Must be set within
  Range 1. Memory_Active_Timeout of deassertion of reset to CXL device
  if CXL.mem HwInit Mode=1

Unfortunately, Memory_Active can take quite a long time depending on
media size (up to 256s per 2.0 spec). Provide a callback for the
eventual establishment of CXL.mem operations via the 'cxl_mem' driver
the 'struct cxl_memdev'. The implementation waits for 60s by default for
now and can be overridden by the mbox_ready_time module parameter.

Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
[djbw: switch to sleeping wait]
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/164298427373.3018233.9309741847039301834.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
drivers/cxl/cxlmem.h
drivers/cxl/pci.c
tools/testing/cxl/test/mem.c

index 00f55f4..e70838e 100644 (file)
@@ -132,6 +132,7 @@ struct cxl_endpoint_dvsec_info {
  * @component_reg_phys: register base of component registers
  * @info: Cached DVSEC information about the device.
  * @mbox_send: @dev specific transport for transmitting mailbox commands
+ * @wait_media_ready: @dev specific method to await media ready
  *
  * See section 8.2.9.5.2 Capacity Configuration and Label Storage for
  * details on capacity parameters.
@@ -165,6 +166,7 @@ struct cxl_dev_state {
        struct cxl_endpoint_dvsec_info info;
 
        int (*mbox_send)(struct cxl_dev_state *cxlds, struct cxl_mbox_cmd *cmd);
+       int (*wait_media_ready)(struct cxl_dev_state *cxlds);
 };
 
 enum cxl_opcode {
index 6b32702..c01bd44 100644 (file)
@@ -49,7 +49,7 @@
 static unsigned short mbox_ready_timeout = 60;
 module_param(mbox_ready_timeout, ushort, 0644);
 MODULE_PARM_DESC(mbox_ready_timeout,
-                "seconds to wait for mailbox ready status");
+                "seconds to wait for mailbox ready / memory active status");
 
 static int cxl_pci_mbox_wait_for_doorbell(struct cxl_dev_state *cxlds)
 {
@@ -418,6 +418,51 @@ static int wait_for_valid(struct cxl_dev_state *cxlds)
        return -ETIMEDOUT;
 }
 
+/*
+ * Wait up to @mbox_ready_timeout for the device to report memory
+ * active.
+ */
+static int wait_for_media_ready(struct cxl_dev_state *cxlds)
+{
+       struct pci_dev *pdev = to_pci_dev(cxlds->dev);
+       int d = cxlds->cxl_dvsec;
+       bool active = false;
+       u64 md_status;
+       int rc, i;
+
+       rc = wait_for_valid(cxlds);
+       if (rc)
+               return rc;
+
+       for (i = mbox_ready_timeout; i; i--) {
+               u32 temp;
+               int rc;
+
+               rc = pci_read_config_dword(
+                       pdev, d + CXL_DVSEC_RANGE_SIZE_LOW(0), &temp);
+               if (rc)
+                       return rc;
+
+               active = FIELD_GET(CXL_DVSEC_MEM_ACTIVE, temp);
+               if (active)
+                       break;
+               msleep(1000);
+       }
+
+       if (!active) {
+               dev_err(&pdev->dev,
+                       "timeout awaiting memory active after %d seconds\n",
+                       mbox_ready_timeout);
+               return -ETIMEDOUT;
+       }
+
+       md_status = readq(cxlds->regs.memdev + CXLMDEV_STATUS_OFFSET);
+       if (!CXLMDEV_READY(md_status))
+               return -EIO;
+
+       return 0;
+}
+
 static int cxl_dvsec_ranges(struct cxl_dev_state *cxlds)
 {
        struct cxl_endpoint_dvsec_info *info = &cxlds->info;
@@ -528,6 +573,8 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
                dev_warn(&pdev->dev,
                         "Device DVSEC not present, skip CXL.mem init\n");
 
+       cxlds->wait_media_ready = wait_for_media_ready;
+
        rc = cxl_setup_regs(pdev, CXL_REGLOC_RBI_MEMDEV, &map);
        if (rc)
                return rc;
index 8c2086c..3af3f94 100644 (file)
@@ -4,6 +4,7 @@
 #include <linux/platform_device.h>
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
+#include <linux/delay.h>
 #include <linux/sizes.h>
 #include <linux/bits.h>
 #include <cxlmem.h>
@@ -236,6 +237,12 @@ static int cxl_mock_mbox_send(struct cxl_dev_state *cxlds, struct cxl_mbox_cmd *
        return rc;
 }
 
+static int cxl_mock_wait_media_ready(struct cxl_dev_state *cxlds)
+{
+       msleep(100);
+       return 0;
+}
+
 static void label_area_release(void *lsa)
 {
        vfree(lsa);
@@ -262,6 +269,7 @@ static int cxl_mock_mem_probe(struct platform_device *pdev)
                return PTR_ERR(cxlds);
 
        cxlds->mbox_send = cxl_mock_mbox_send;
+       cxlds->wait_media_ready = cxl_mock_wait_media_ready;
        cxlds->payload_size = SZ_4K;
 
        rc = cxl_enumerate_cmds(cxlds);