arm: dts: rockchip: Add HDMI out for RockPI N8/N10

This patch adds support to enable HDMI out for
N10 and N8 combinations SBCs.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

diff --git a/arch/arm/dts/rk3288-vmarc-som.dtsi b/arch/arm/dts/rk3288-vmarc-som.dtsi
index 72a503e..717cb3d 100644 (file)
--- a/arch/arm/dts/rk3288-vmarc-som.dtsi
+++ b/arch/arm/dts/rk3288-vmarc-som.dtsi
@@ -38,6 +38,12 @@
        snps,reset-gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
 };
 
+&hdmi {
+       ddc-i2c-bus = <&i2c5>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&hdmi_cec_c0>;
+};
+
 &i2c0 {
        clock-frequency = <400000>;
        status = "okay";
@@ -225,6 +231,10 @@
        };
 };
 
+&i2c5 {
+       status = "okay";
+};
+
 &pinctrl {
        pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
                drive-strength = <8>;

diff --git a/arch/arm/dts/rk3399pro-vmarc-som.dtsi b/arch/arm/dts/rk3399pro-vmarc-som.dtsi
index 111d6cf..ebccc4a 100644 (file)
--- a/arch/arm/dts/rk3399pro-vmarc-som.dtsi
+++ b/arch/arm/dts/rk3399pro-vmarc-som.dtsi
@@ -39,6 +39,12 @@
        snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
 };
 
+&hdmi {
+       ddc-i2c-bus = <&i2c3>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&hdmi_cec>;
+};
+
 &i2c0 {
        clock-frequency = <400000>;
        i2c-scl-falling-time-ns = <30>;
@@ -285,6 +291,12 @@
        };
 };
 
+&i2c3 {
+       i2c-scl-rising-time-ns = <450>;
+       i2c-scl-falling-time-ns = <15>;
+       status = "okay";
+};
+
 &io_domains {
        status = "okay";
        bt656-supply = <&vcca_1v8>;

diff --git a/arch/arm/dts/rockchip-radxa-dalang-carrier.dtsi b/arch/arm/dts/rockchip-radxa-dalang-carrier.dtsi
index d2b6ead..26b53ea 100644 (file)
--- a/arch/arm/dts/rockchip-radxa-dalang-carrier.dtsi
+++ b/arch/arm/dts/rockchip-radxa-dalang-carrier.dtsi
@@ -66,6 +66,10 @@
        status = "okay";
 };
 
+&hdmi {
+       status = "okay";
+};
+
 &pwm0 {
        status = "okay";
 };
@@ -94,3 +98,19 @@
 &uart2 {
        status = "okay";
 };
+
+&vopb {
+       status = "okay";
+};
+
+&vopb_mmu {
+       status = "okay";
+};
+
+&vopl {
+       status = "okay";
+};
+
+&vopl_mmu {
+       status = "okay";
+};