ARM: debug: Use generic 8250 debug_ll for am3517 and am335x

We want to use generic 8250 debug_ll code to get DEBUG_UNCOMPRESS
working and to simplify the code. The old debug_ll code is no longer
needed and the machine ID based detection is no longer used.

Note that for most part there's no need to keep DEBUG_LL enabled.
We now have CONFIG_SERIAL_EARLYCON working very early as long as
the kernel cmdline has "earlycon" in it and the board specific dts
file has chosen configured with with the port using stdout-path.

Cc: Hoeun Ryu <hoeun.ryu@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 4bfc2c2..b207ad2 100644 (file)
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -727,7 +727,7 @@ choice
        config DEBUG_AM33XXUART1
                bool "Kernel low-level debugging messages via AM33XX UART1"
                depends on ARCH_OMAP2PLUS
-               select DEBUG_OMAP2PLUS_UART
+               select DEBUG_UART_8250
 
        config DEBUG_ZOOM_UART
                bool "Kernel low-level debugging messages via Zoom2/3 UART"
@@ -1523,6 +1523,7 @@ config DEBUG_UART_PHYS
        default 0x40090000 if DEBUG_LPC32XX
        default 0x40100000 if DEBUG_PXA_UART1
        default 0x42000000 if DEBUG_GEMINI
+       default 0x44e09000 if DEBUG_AM33XXUART1
        default 0x48020000 if DEBUG_OMAP4UART3 || DEBUG_TI81XXUART1
        default 0x48022000 if DEBUG_TI81XXUART2
        default 0x48024000 if DEBUG_TI81XXUART3
@@ -1651,6 +1652,7 @@ config DEBUG_UART_VIRT
        default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1
        default 0xf8ffee00 if DEBUG_AT91_SAM9263_DBGU
        default 0xf8fff200 if DEBUG_AT91_RM9200_DBGU
+       default 0xf9e09000 if DEBUG_AM33XXUART1
        default 0xfa020000 if DEBUG_OMAP4UART3 || DEBUG_TI81XXUART1
        default 0xfa022000 if DEBUG_TI81XXUART2
        default 0xfa024000 if DEBUG_TI81XXUART3

diff --git a/arch/arm/include/debug/omap2plus.S b/arch/arm/include/debug/omap2plus.S
index 3098314..8be08d9 100644 (file)
--- a/arch/arm/include/debug/omap2plus.S
+++ b/arch/arm/include/debug/omap2plus.S
@@ -12,15 +12,6 @@
 
 #include <linux/serial_reg.h>
 
-/* OMAP3 serial ports */
-#define OMAP3_UART4_AM35XX_BASE        0x4809E000      /* Only on AM35xx */
-
-/* AM3505/3517 UART4 */
-#define AM35XX_UART4_BASE      0x4809E000      /* Only on AM3505/3517 */
-
-/* AM33XX serial port */
-#define AM33XX_UART1_BASE      0x44E09000
-
 /* External port on Zoom2/3 */
 #define ZOOM_UART_BASE         0x10000000
 #define ZOOM_UART_VIRT         0xfa400000
@@ -51,11 +42,6 @@ omap_uart_lsr:       .word   0
                bne     100f                    @ already configured
 
                /* Configure the UART offset from the phys/virt base */
-#ifdef CONFIG_DEBUG_AM33XXUART1
-               ldr     \rp, =AM33XX_UART1_BASE
-               and     \rp, \rp, #0x00ffffff
-               b       97f
-#endif
 #ifdef CONFIG_DEBUG_ZOOM_UART
                ldr     \rp, =ZOOM_UART_BASE
                str     \rp, [\tmp, #0]         @ omap_uart_phys
@@ -66,17 +52,6 @@ omap_uart_lsr:       .word   0
 #endif
                b       10b
 
-               /* AM33XX: Store both phys and virt address for the uart */
-97:            add     \rp, \rp, #0x44000000   @ phys base
-               str     \rp, [\tmp, #0]         @ omap_uart_phys
-               sub     \rp, \rp, #0x44000000   @ phys base
-               add     \rp, \rp, #0xf9000000   @ virt base
-               str     \rp, [\tmp, #4]         @ omap_uart_virt
-               mov     \rp, #(UART_LSR << OMAP_PORT_SHIFT)
-               str     \rp, [\tmp, #8]         @ omap_uart_lsr
-
-               b       10b
-
                .align
 99:            .word   .
                .word   omap_uart_phys