+++ /dev/null
-filesystems/dnotify_test
-laptops/dslm
-timers/hpet_example
-vm/hugepage-mmap
-vm/hugepage-shm
-vm/map_hugetlb
-
#define ROUND_UP(x) ((x + ALIGN - 1) & ~(ALIGN - 1))
-ssize_t do_read(int fd, void *buf, size_t count)
+static ssize_t do_read(int fd, void *buf, size_t count)
{
size_t offset = 0;
ssize_t l;
return offset;
}
-ssize_t do_write(int fd, const void *buf, size_t count)
+static ssize_t do_write(int fd, const void *buf, size_t count)
{
size_t offset = 0;
ssize_t l;
return offset;
}
-ssize_t write_zero(int fd, size_t len)
+static ssize_t write_zero(int fd, size_t len)
{
size_t i = len;
- compatible: Must be one of the following
- "renesas,r7s72100-mstp-clocks" for R7S72100 (RZ) MSTP gate clocks
+ - "renesas,r8a7740-mstp-clocks" for R8A7740 (R-Mobile A1) MSTP gate clocks
- "renesas,r8a7779-mstp-clocks" for R8A7779 (R-Car H1) MSTP gate clocks
- "renesas,r8a7790-mstp-clocks" for R8A7790 (R-Car H2) MSTP gate clocks
- "renesas,r8a7791-mstp-clocks" for R8A7791 (R-Car M2) MSTP gate clocks
+ - "renesas,r8a7794-mstp-clocks" for R8A7794 (R-Car E2) MSTP gate clocks
+ - "renesas,sh73a0-mstp-clocks" for SH73A0 (SH-MobileAG5) MSTP gate clocks
- "renesas,cpg-mstp-clock" for generic MSTP gate clocks
- reg: Base address and length of the I/O mapped registers used by the MSTP
clocks. The first register is the clock control register and is mandatory.
dallas,ds3232 Extremely Accurate I²C RTC with Integrated Crystal and SRAM
dallas,ds4510 CPU Supervisor with Nonvolatile Memory and Programmable I/O
dallas,ds75 Digital Thermometer and Thermostat
-dialog,da9053 DA9053: flexible system level PMIC with multicore support
+dlg,da9053 DA9053: flexible system level PMIC with multicore support
epson,rx8025 High-Stability. I2C-Bus INTERFACE REAL TIME CLOCK MODULE
epson,rx8581 I2C-BUS INTERFACE REAL TIME CLOCK MODULE
fsl,mag3110 MAG3110: Xtrinsic High Accuracy, 3D Magnetometer
Required properties:
-- compatible: must be "diasemi,da9210"
+- compatible: must be "dlg,da9210"
- reg: the i2c slave address of the regulator. It should be 0x68.
Any standard regulator properties can be used to configure the single da9210
Example:
da9210@68 {
- compatible = "diasemi,da9210";
+ compatible = "dlg,da9210";
reg = <0x68>;
regulator-min-microvolt = <900000>;
-Device tree binding vendor prefix registry. Keep list in alphabetical order.
-
-This isn't an exhaustive list, but you should add new prefixes to it before
+Device tree binding vendor prefix registry. Keep list in alphabetical order. This isn't an exhaustive list, but you should add new prefixes to it before
using them to avoid name-space collisions.
active-semi Active-Semi International Inc
dallas Maxim Integrated Products (formerly Dallas Semiconductor)
davicom DAVICOM Semiconductor, Inc.
denx Denx Software Engineering
+dlg Dialog Semiconductor
edt Emerging Display Technologies
emmicro EM Microelectronic
epfl Ecole Polytechnique Fédérale de Lausanne
--- /dev/null
+dnotify_test
--- /dev/null
+dslm
+freefall
timestamping
+txtimestamp
hwtstamp_config
--- /dev/null
+disable-tsc-ctxt-sw-stress-test
+disable-tsc-on-off-stress-test
+disable-tsc-test
# define PR_TSC_SIGSEGV 2 /* throw a SIGSEGV instead of reading the TSC */
#endif
-uint64_t rdtsc() {
+static uint64_t rdtsc(void)
+{
uint32_t lo, hi;
/* We cannot use "=A", since this would use %rax on x86_64 */
__asm__ __volatile__ ("rdtsc" : "=a" (lo), "=d" (hi));
return (uint64_t)hi << 32 | lo;
}
-void sigsegv_expect(int sig)
+static void sigsegv_expect(int sig)
{
/* */
}
-void segvtask(void)
+static void segvtask(void)
{
if (prctl(PR_SET_TSC, PR_TSC_SIGSEGV) < 0)
{
}
-void sigsegv_fail(int sig)
+static void sigsegv_fail(int sig)
{
fprintf(stderr, "FATAL ERROR, rdtsc() failed while enabled\n");
exit(0);
}
-void rdtsctask(void)
+static void rdtsctask(void)
{
if (prctl(PR_SET_TSC, PR_TSC_ENABLE) < 0)
{
/* snippet from wikipedia :-) */
-uint64_t rdtsc() {
+static uint64_t rdtsc(void)
+{
uint32_t lo, hi;
/* We cannot use "=A", since this would use %rax on x86_64 */
__asm__ __volatile__ ("rdtsc" : "=a" (lo), "=d" (hi));
int should_segv = 0;
-void sigsegv_cb(int sig)
+static void sigsegv_cb(int sig)
{
if (!should_segv)
{
rdtsc();
}
-void task(void)
+static void task(void)
{
signal(SIGSEGV, sigsegv_cb);
alarm(10);
[PR_TSC_SIGSEGV] = "PR_TSC_SIGSEGV",
};
-uint64_t rdtsc() {
+static uint64_t rdtsc(void)
+{
uint32_t lo, hi;
/* We cannot use "=A", since this would use %rax on x86_64 */
__asm__ __volatile__ ("rdtsc" : "=a" (lo), "=d" (hi));
return (uint64_t)hi << 32 | lo;
}
-void sigsegv_cb(int sig)
+static void sigsegv_cb(int sig)
{
int tsc_val = 0;
--- /dev/null
+hpet_example
--- /dev/null
+vdso_test
+vdso_standalone_test_x86
select ARCH_SHMOBILE
select ARM_PATCH_PHYS_VIRT
select CLKDEV_LOOKUP
+ select CPU_V7
select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select NO_IOPORT_MAP
select PINCTRL
select PM_GENERIC_DOMAINS if PM
+ select SH_CLK_CPG
select SPARSE_IRQ
help
Support for Renesas ARM SoC platforms using a non-multiplatform
r8a7740-armadillo800eva.dtb \
r8a7778-bockw.dtb \
r8a7778-bockw-reference.dtb \
- r8a7740-armadillo800eva-reference.dtb \
r8a7779-marzen.dtb \
r8a7791-koelsch.dtb \
r8a7790-lager.dtb \
r8a7791-henninger.dtb \
r8a7791-koelsch.dtb \
r8a7790-lager.dtb \
- r8a7779-marzen.dtb
+ r8a7779-marzen.dtb \
+ r8a7794-alt.dtb
dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_arria5_socdk.dtb \
socfpga_cyclone5_socdk.dtb \
socfpga_cyclone5_sockit.dtb \
};
pmic: dialog@48 {
- compatible = "dialog,da9053", "dialog,da9052";
+ compatible = "dlg,da9053", "dlg,da9052";
reg = <0x48>;
};
};
--- /dev/null
+/*
+ * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Phytec phyFLEX-i.MX6 Ouad";
+ compatible = "phytec,imx6q-pfla02", "fsl,imx6q";
+
+ memory {
+ reg = <0x10000000 0x80000000>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_usb_otg_vbus: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio4 15 0>;
+ };
+
+ reg_usb_h1_vbus: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 0 0>;
+ };
+ };
+
+ gpio_leds: leds {
+ compatible = "gpio-leds";
+
+ green {
+ label = "phyflex:green";
+ gpios = <&gpio1 30 0>;
+ };
+
+ red {
+ label = "phyflex:red";
+ gpios = <&gpio2 31 0>;
+ };
+ };
+};
+
+&ecspi3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi3>;
+ status = "okay";
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio4 24 0>;
+
+ flash@0 {
+ compatible = "m25p80";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ };
+
+ pmic@58 {
+ compatible = "dlg,da9063";
+ reg = <0x58>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <17 0x8>; /* active-low GPIO4_17 */
+
+ regulators {
+ vddcore_reg: bcore1 {
+ regulator-min-microvolt = <730000>;
+ regulator-max-microvolt = <1380000>;
+ regulator-always-on;
+ };
+
+ vddsoc_reg: bcore2 {
+ regulator-min-microvolt = <730000>;
+ regulator-max-microvolt = <1380000>;
+ regulator-always-on;
+ };
+
+ vdd_ddr3_reg: bpro {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ };
+
+ vdd_3v3_reg: bperi {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_buckmem_reg: bmem {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_eth_reg: bio {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ vdd_eth_io_reg: ldo4 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ vdd_mx6_snvs_reg: ldo5 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ vdd_3v3_pmic_io_reg: ldo6 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_sd0_reg: ldo9 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vdd_sd1_reg: ldo10 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vdd_mx6_high_reg: ldo11 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx6q-phytec-pfla02 {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000
+ MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */
+ MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x80000000 /* PMIC interrupt */
+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* Green LED */
+ MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x80000000 /* Red LED */
+ >;
+ };
+
+ pinctrl_ecspi3: ecspi3grp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
+ MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
+ MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
+ >;
+ };
+
+ pinctrl_gpmi_nand: gpminandgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
+ MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
+ MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D30__UART3_RTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_D31__UART3_CTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbh1: usbh1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_0__USB_H1_PWR 0x80000000
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3_cdwp: usdhc3cdwp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000
+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
+ >;
+ };
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii";
+ phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+ phy-supply = <&vdd_eth_io_reg>;
+ status = "disabled";
+};
+
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand>;
+ nand-on-flash-bbt;
+ status = "disabled";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "disabled";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "disabled";
+};
+
+&usbh1 {
+ vbus-supply = <®_usb_h1_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1>;
+ status = "disabled";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ status = "disabled";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ cd-gpios = <&gpio1 4 0>;
+ wp-gpios = <&gpio1 2 0>;
+ status = "disabled";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3
+ &pinctrl_usdhc3_cdwp>;
+ cd-gpios = <&gpio1 27 0>;
+ wp-gpios = <&gpio1 29 0>;
+ status = "disabled";
+};
clock-frequency = <48000000>;
};
+&mtu2 {
+ status = "ok";
+};
+
&i2c2 {
status = "okay";
clock-frequency = <400000>;
status = "disabled";
};
+ mtu2: timer@fcff0000 {
+ compatible = "renesas,mtu2-r7s72100", "renesas,mtu2";
+ reg = <0xfcff0000 0x400>;
+ interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tgi0a";
+ clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+
scif0: serial@e8007000 {
compatible = "renesas,scif-r7s72100", "renesas,scif";
reg = <0xe8007000 64>;
};
irqc0: interrupt-controller@e61c0000 {
- compatible = "renesas,irqc";
+ compatible = "renesas,irqc-r8a73a4", "renesas,irqc";
#interrupt-cells = <2>;
interrupt-controller;
reg = <0 0xe61c0000 0 0x200>;
};
irqc1: interrupt-controller@e61c0200 {
- compatible = "renesas,irqc";
+ compatible = "renesas,irqc-r8a73a4", "renesas,irqc";
#interrupt-cells = <2>;
interrupt-controller;
reg = <0 0xe61c0200 0 0x200>;
};
thermal@e61f0000 {
- compatible = "renesas,rcar-thermal";
+ compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal";
reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>,
<0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>;
interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+++ /dev/null
-/*
- * Reference Device Tree Source for the armadillo 800 eva board
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7740.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
- model = "armadillo 800 eva reference";
- compatible = "renesas,armadillo800eva-reference", "renesas,r8a7740";
-
- aliases {
- serial1 = &scifa1;
- };
-
- chosen {
- bootargs = "console=tty0 console=ttySC1,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
- };
-
- memory {
- device_type = "memory";
- reg = <0x40000000 0x20000000>;
- };
-
- reg_3p3v: regulator@0 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vcc_sdhi0: regulator@1 {
- compatible = "regulator-fixed";
-
- regulator-name = "SDHI0 Vcc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&pfc 75 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vccq_sdhi0: regulator@2 {
- compatible = "regulator-gpio";
-
- regulator-name = "SDHI0 VccQ";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc_sdhi0>;
-
- enable-gpio = <&pfc 74 GPIO_ACTIVE_HIGH>;
- gpios = <&pfc 17 GPIO_ACTIVE_HIGH>;
- states = <3300000 0
- 1800000 1>;
-
- enable-active-high;
- };
-
- reg_5p0v: regulator@3 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-5.0V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- power-key {
- gpios = <&pfc 99 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_POWER>;
- label = "SW3";
- gpio-key,wakeup;
- };
-
- back-key {
- gpios = <&pfc 100 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_BACK>;
- label = "SW4";
- };
-
- menu-key {
- gpios = <&pfc 97 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_MENU>;
- label = "SW5";
- };
-
- home-key {
- gpios = <&pfc 98 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_HOME>;
- label = "SW6";
- };
- };
-
- leds {
- compatible = "gpio-leds";
- led3 {
- gpios = <&pfc 102 GPIO_ACTIVE_HIGH>;
- label = "LED3";
- };
- led4 {
- gpios = <&pfc 111 GPIO_ACTIVE_HIGH>;
- label = "LED4";
- };
- led5 {
- gpios = <&pfc 110 GPIO_ACTIVE_HIGH>;
- label = "LED5";
- };
- led6 {
- gpios = <&pfc 177 GPIO_ACTIVE_HIGH>;
- label = "LED6";
- };
- };
-
- i2c2: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "i2c-gpio";
- gpios = <&pfc 208 GPIO_ACTIVE_HIGH /* sda */
- &pfc 91 GPIO_ACTIVE_HIGH /* scl */
- >;
- i2c-gpio,delay-us = <5>;
- };
-
- backlight {
- compatible = "pwm-backlight";
- pwms = <&tpu 2 33333 PWM_POLARITY_INVERTED>;
- brightness-levels = <0 1 2 4 8 16 32 64 128 255>;
- default-brightness-level = <9>;
- pinctrl-0 = <&backlight_pins>;
- pinctrl-names = "default";
- power-supply = <®_5p0v>;
- enable-gpios = <&pfc 61 GPIO_ACTIVE_HIGH>;
- };
-
- sound {
- compatible = "simple-audio-card";
-
- simple-audio-card,format = "i2s";
-
- simple-audio-card,cpu {
- sound-dai = <&sh_fsi2 0>;
- bitclock-inversion;
- };
-
- simple-audio-card,codec {
- sound-dai = <&wm8978>;
- bitclock-master;
- frame-master;
- system-clock-frequency = <12288000>;
- };
- };
-};
-
-ðer {
- pinctrl-0 = <ðer_pins>;
- pinctrl-names = "default";
-
- phy-handle = <&phy0>;
- status = "ok";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- };
-};
-
-&i2c0 {
- status = "okay";
- touchscreen@55 {
- compatible = "sitronix,st1232";
- reg = <0x55>;
- interrupt-parent = <&irqpin1>;
- interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-0 = <&st1232_pins>;
- pinctrl-names = "default";
- gpios = <&pfc 166 GPIO_ACTIVE_LOW>;
- };
-
- wm8978: wm8978@1a {
- #sound-dai-cells = <0>;
- compatible = "wlf,wm8978";
- reg = <0x1a>;
- };
-};
-
-&i2c2 {
- status = "okay";
- rtc@30 {
- compatible = "sii,s35390a";
- reg = <0x30>;
- };
-};
-
-&pfc {
- ether_pins: ether {
- renesas,groups = "gether_mii", "gether_int";
- renesas,function = "gether";
- };
-
- scifa1_pins: serial1 {
- renesas,groups = "scifa1_data";
- renesas,function = "scifa1";
- };
-
- st1232_pins: touchscreen {
- renesas,groups = "intc_irq10";
- renesas,function = "intc";
- };
-
- backlight_pins: backlight {
- renesas,groups = "tpu0_to2_1";
- renesas,function = "tpu0";
- };
-
- mmc0_pins: mmc0 {
- renesas,groups = "mmc0_data8_1", "mmc0_ctrl_1";
- renesas,function = "mmc0";
- };
-
- sdhi0_pins: sd0 {
- renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_wp";
- renesas,function = "sdhi0";
- };
-
- fsia_pins: sounda {
- renesas,groups = "fsia_sclk_in", "fsia_mclk_out",
- "fsia_data_in_1", "fsia_data_out_0";
- renesas,function = "fsia";
- };
-};
-
-&tpu {
- status = "okay";
-};
-
-&mmcif0 {
- pinctrl-0 = <&mmc0_pins>;
- pinctrl-names = "default";
-
- vmmc-supply = <®_3p3v>;
- bus-width = <8>;
- non-removable;
- status = "okay";
-};
-
-&scifa1 {
- pinctrl-0 = <&scifa1_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&sdhi0 {
- pinctrl-0 = <&sdhi0_pins>;
- pinctrl-names = "default";
-
- vmmc-supply = <&vcc_sdhi0>;
- vqmmc-supply = <&vccq_sdhi0>;
- bus-width = <4>;
- cd-gpios = <&pfc 167 GPIO_ACTIVE_LOW>;
- status = "okay";
-};
-
-&sh_fsi2 {
- pinctrl-0 = <&fsia_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
/dts-v1/;
#include "r8a7740.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
/ {
model = "armadillo 800 eva";
- compatible = "renesas,armadillo800eva";
+ compatible = "renesas,armadillo800eva", "renesas,r8a7740";
+
+ aliases {
+ serial1 = &scifa1;
+ };
chosen {
bootargs = "console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
device_type = "memory";
reg = <0x40000000 0x20000000>;
};
+
+ reg_3p3v: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc_sdhi0: regulator@1 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI0 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&pfc 75 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vccq_sdhi0: regulator@2 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI0 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_sdhi0>;
+
+ enable-gpio = <&pfc 74 GPIO_ACTIVE_HIGH>;
+ gpios = <&pfc 17 GPIO_ACTIVE_HIGH>;
+ states = <3300000 0
+ 1800000 1>;
+
+ enable-active-high;
+ };
+
+ reg_5p0v: regulator@3 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-5.0V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power-key {
+ gpios = <&pfc 99 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ label = "SW3";
+ gpio-key,wakeup;
+ };
+
+ back-key {
+ gpios = <&pfc 100 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_BACK>;
+ label = "SW4";
+ };
+
+ menu-key {
+ gpios = <&pfc 97 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_MENU>;
+ label = "SW5";
+ };
+
+ home-key {
+ gpios = <&pfc 98 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_HOME>;
+ label = "SW6";
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led3 {
+ gpios = <&pfc 102 GPIO_ACTIVE_HIGH>;
+ label = "LED3";
+ };
+ led4 {
+ gpios = <&pfc 111 GPIO_ACTIVE_HIGH>;
+ label = "LED4";
+ };
+ led5 {
+ gpios = <&pfc 110 GPIO_ACTIVE_HIGH>;
+ label = "LED5";
+ };
+ led6 {
+ gpios = <&pfc 177 GPIO_ACTIVE_HIGH>;
+ label = "LED6";
+ };
+ };
+
+ i2c2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "i2c-gpio";
+ gpios = <&pfc 208 GPIO_ACTIVE_HIGH /* sda */
+ &pfc 91 GPIO_ACTIVE_HIGH /* scl */
+ >;
+ i2c-gpio,delay-us = <5>;
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&tpu 2 33333 PWM_POLARITY_INVERTED>;
+ brightness-levels = <0 1 2 4 8 16 32 64 128 255>;
+ default-brightness-level = <9>;
+ pinctrl-0 = <&backlight_pins>;
+ pinctrl-names = "default";
+ power-supply = <®_5p0v>;
+ enable-gpios = <&pfc 61 GPIO_ACTIVE_HIGH>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,format = "i2s";
+
+ simple-audio-card,cpu {
+ sound-dai = <&sh_fsi2 0>;
+ bitclock-inversion;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&wm8978>;
+ bitclock-master;
+ frame-master;
+ system-clock-frequency = <12288000>;
+ };
+ };
+};
+
+ðer {
+ pinctrl-0 = <ðer_pins>;
+ pinctrl-names = "default";
+
+ phy-handle = <&phy0>;
+ status = "ok";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&extal1_clk {
+ clock-frequency = <25000000>;
+};
+&extal2_clk {
+ clock-frequency = <48000000>;
+};
+&fsibck_clk {
+ clock-frequency = <12288000>;
+};
+&cpg_clocks {
+ renesas,mode = <0x05>; /* MD_CK0 | MD_CK2 */
+};
+
+&cmt1 {
+ status = "ok";
+};
+
+&i2c0 {
+ status = "okay";
+ touchscreen@55 {
+ compatible = "sitronix,st1232";
+ reg = <0x55>;
+ interrupt-parent = <&irqpin1>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-0 = <&st1232_pins>;
+ pinctrl-names = "default";
+ gpios = <&pfc 166 GPIO_ACTIVE_LOW>;
+ };
+
+ wm8978: wm8978@1a {
+ #sound-dai-cells = <0>;
+ compatible = "wlf,wm8978";
+ reg = <0x1a>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+ rtc@30 {
+ compatible = "sii,s35390a";
+ reg = <0x30>;
+ };
+};
+
+&pfc {
+ ether_pins: ether {
+ renesas,groups = "gether_mii", "gether_int";
+ renesas,function = "gether";
+ };
+
+ scifa1_pins: serial1 {
+ renesas,groups = "scifa1_data";
+ renesas,function = "scifa1";
+ };
+
+ st1232_pins: touchscreen {
+ renesas,groups = "intc_irq10";
+ renesas,function = "intc";
+ };
+
+ backlight_pins: backlight {
+ renesas,groups = "tpu0_to2_1";
+ renesas,function = "tpu0";
+ };
+
+ mmc0_pins: mmc0 {
+ renesas,groups = "mmc0_data8_1", "mmc0_ctrl_1";
+ renesas,function = "mmc0";
+ };
+
+ sdhi0_pins: sd0 {
+ renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_wp";
+ renesas,function = "sdhi0";
+ };
+
+ fsia_pins: sounda {
+ renesas,groups = "fsia_sclk_in", "fsia_mclk_out",
+ "fsia_data_in_1", "fsia_data_out_0";
+ renesas,function = "fsia";
+ };
+};
+
+&tpu {
+ status = "okay";
+};
+
+&mmcif0 {
+ pinctrl-0 = <&mmc0_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <®_3p3v>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&scifa1 {
+ pinctrl-0 = <&scifa1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&vcc_sdhi0>;
+ vqmmc-supply = <&vccq_sdhi0>;
+ bus-width = <4>;
+ cd-gpios = <&pfc 167 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&sh_fsi2 {
+ pinctrl-0 = <&fsia_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
};
/include/ "skeleton.dtsi"
+#include <dt-bindings/clock/r8a7740-clock.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
};
+ cmt1: timer@e6138000 {
+ compatible = "renesas,cmt-48-r8a7740", "renesas,cmt-48";
+ reg = <0xe6138000 0x170>;
+ interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7740_CLK_CMT1>;
+ clock-names = "fck";
+
+ renesas,channels-mask = <0x3f>;
+
+ status = "disabled";
+ };
+
/* irqpin0: IRQ0 - IRQ7 */
irqpin0: irqpin@e6900000 {
compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin";
reg = <0xe9a00000 0x800>,
<0xe9a01800 0x800>;
interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
- /* clocks = <&mstp3_clks R8A7740_CLK_GETHER>; */
+ clocks = <&mstp3_clks R8A7740_CLK_GETHER>;
phy-mode = "mii";
#address-cells = <1>;
#size-cells = <0>;
0 202 IRQ_TYPE_LEVEL_HIGH
0 203 IRQ_TYPE_LEVEL_HIGH
0 204 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7740_CLK_IIC0>;
status = "disabled";
};
0 71 IRQ_TYPE_LEVEL_HIGH
0 72 IRQ_TYPE_LEVEL_HIGH
0 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7740_CLK_IIC1>;
status = "disabled";
};
compatible = "renesas,scifa-r8a7740", "renesas,scifa";
reg = <0xe6c40000 0x100>;
interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7740_CLK_SCIFA0>;
+ clock-names = "sci_ick";
status = "disabled";
};
compatible = "renesas,scifa-r8a7740", "renesas,scifa";
reg = <0xe6c50000 0x100>;
interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7740_CLK_SCIFA1>;
+ clock-names = "sci_ick";
status = "disabled";
};
compatible = "renesas,scifa-r8a7740", "renesas,scifa";
reg = <0xe6c60000 0x100>;
interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7740_CLK_SCIFA0>;
+ clock-names = "sci_ick";
status = "disabled";
};
compatible = "renesas,scifa-r8a7740", "renesas,scifa";
reg = <0xe6c70000 0x100>;
interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7740_CLK_SCIFA3>;
+ clock-names = "sci_ick";
status = "disabled";
};
compatible = "renesas,scifa-r8a7740", "renesas,scifa";
reg = <0xe6c80000 0x100>;
interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7740_CLK_SCIFA4>;
+ clock-names = "sci_ick";
status = "disabled";
};
compatible = "renesas,scifa-r8a7740", "renesas,scifa";
reg = <0xe6cb0000 0x100>;
interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7740_CLK_SCIFA5>;
+ clock-names = "sci_ick";
status = "disabled";
};
compatible = "renesas,scifa-r8a7740", "renesas,scifa";
reg = <0xe6cc0000 0x100>;
interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7740_CLK_SCIFA6>;
+ clock-names = "sci_ick";
status = "disabled";
};
compatible = "renesas,scifa-r8a7740", "renesas,scifa";
reg = <0xe6cd0000 0x100>;
interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7740_CLK_SCIFA7>;
+ clock-names = "sci_ick";
status = "disabled";
};
compatible = "renesas,scifb-r8a7740", "renesas,scifb";
reg = <0xe6c30000 0x100>;
interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7740_CLK_SCIFB>;
+ clock-names = "sci_ick";
status = "disabled";
};
tpu: pwm@e6600000 {
compatible = "renesas,tpu-r8a7740", "renesas,tpu";
reg = <0xe6600000 0x100>;
+ clocks = <&mstp3_clks R8A7740_CLK_TPU0>;
status = "disabled";
#pwm-cells = <3>;
};
reg = <0xe6bd0000 0x100>;
interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH
0 57 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7740_CLK_MMC>;
status = "disabled";
};
interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH
0 118 IRQ_TYPE_LEVEL_HIGH
0 119 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7740_CLK_SDHI0>;
cap-sd-highspeed;
cap-sdio-irq;
status = "disabled";
interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH
0 122 IRQ_TYPE_LEVEL_HIGH
0 123 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7740_CLK_SDHI1>;
cap-sd-highspeed;
cap-sdio-irq;
status = "disabled";
interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH
0 126 IRQ_TYPE_LEVEL_HIGH
0 127 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp4_clks R8A7740_CLK_SDHI2>;
cap-sd-highspeed;
cap-sdio-irq;
status = "disabled";
compatible = "renesas,fsi2-r8a7740", "renesas,sh_fsi2";
reg = <0xfe1f0000 0x400>;
interrupts = <0 9 0x4>;
+ clocks = <&mstp3_clks R8A7740_CLK_FSI>;
status = "disabled";
};
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /* External root clock */
+ extalr_clk: extalr_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "extalr";
+ };
+ extal1_clk: extal1_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "extal1";
+ };
+ extal2_clk: extal2_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "extal2";
+ };
+ dv_clk: dv_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ clock-output-names = "dv";
+ };
+ fsiack_clk: fsiack_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "fsiack";
+ };
+ fsibck_clk: fsibck_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "fsibck";
+ };
+
+ /* Special CPG clocks */
+ cpg_clocks: cpg_clocks@e6150000 {
+ compatible = "renesas,r8a7740-cpg-clocks";
+ reg = <0xe6150000 0x10000>;
+ clocks = <&extal1_clk>, <&extalr_clk>;
+ #clock-cells = <1>;
+ clock-output-names = "system", "pllc0", "pllc1",
+ "pllc2", "r",
+ "usb24s",
+ "i", "zg", "b", "m1", "hp",
+ "hpp", "usbp", "s", "zb", "m3",
+ "cp";
+ };
+
+ /* Variable factor clocks (DIV6) */
+ sub_clk: sub_clk@e6150080 {
+ compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0xe6150080 4>;
+ clocks = <&pllc1_div2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "sub";
+ };
+
+ /* Fixed factor clocks */
+ pllc1_div2_clk: pllc1_div2_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7740_CLK_PLLC1>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ clock-output-names = "pllc1_div2";
+ };
+ extal1_div2_clk: extal1_div2_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&extal1_clk>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ clock-output-names = "extal1_div2";
+ };
+
+ /* Gate clocks */
+ subck_clks: subck_clks@e6150080 {
+ compatible = "renesas,r8a7740-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0xe6150080 4>;
+ clocks = <&sub_clk>, <&sub_clk>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <
+ R8A7740_CLK_SUBCK R8A7740_CLK_SUBCK2
+ >;
+ clock-output-names =
+ "subck", "subck2";
+ };
+ mstp1_clks: mstp1_clks@e6150134 {
+ compatible = "renesas,r8a7740-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0xe6150134 4>, <0xe6150038 4>;
+ clocks = <&cpg_clocks R8A7740_CLK_S>,
+ <&cpg_clocks R8A7740_CLK_S>, <&sub_clk>,
+ <&cpg_clocks R8A7740_CLK_B>,
+ <&sub_clk>, <&sub_clk>,
+ <&cpg_clocks R8A7740_CLK_B>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <
+ R8A7740_CLK_CEU21 R8A7740_CLK_CEU20 R8A7740_CLK_TMU0
+ R8A7740_CLK_LCDC1 R8A7740_CLK_IIC0 R8A7740_CLK_TMU1
+ R8A7740_CLK_LCDC0
+ >;
+ clock-output-names =
+ "ceu21", "ceu20", "tmu0", "lcdc1", "iic0",
+ "tmu1", "lcdc0";
+ };
+ mstp2_clks: mstp2_clks@e6150138 {
+ compatible = "renesas,r8a7740-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0xe6150138 4>, <0xe6150040 4>;
+ clocks = <&sub_clk>, <&sub_clk>,
+ <&cpg_clocks R8A7740_CLK_HP>,
+ <&cpg_clocks R8A7740_CLK_HP>,
+ <&cpg_clocks R8A7740_CLK_HP>,
+ <&cpg_clocks R8A7740_CLK_HP>,
+ <&sub_clk>, <&sub_clk>, <&sub_clk>,
+ <&sub_clk>, <&sub_clk>, <&sub_clk>,
+ <&sub_clk>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <
+ R8A7740_CLK_SCIFA6 R8A7740_CLK_SCIFA7
+ R8A7740_CLK_DMAC1 R8A7740_CLK_DMAC2
+ R8A7740_CLK_DMAC3 R8A7740_CLK_USBDMAC
+ R8A7740_CLK_SCIFA5 R8A7740_CLK_SCIFB
+ R8A7740_CLK_SCIFA0 R8A7740_CLK_SCIFA1
+ R8A7740_CLK_SCIFA2 R8A7740_CLK_SCIFA3
+ R8A7740_CLK_SCIFA4
+ >;
+ clock-output-names =
+ "scifa6", "scifa7", "dmac1", "dmac2", "dmac3",
+ "usbdmac", "scifa5", "scifb", "scifa0", "scifa1",
+ "scifa2", "scifa3", "scifa4";
+ };
+ mstp3_clks: mstp3_clks@e615013c {
+ compatible = "renesas,r8a7740-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0xe615013c 4>, <0xe6150048 4>;
+ clocks = <&cpg_clocks R8A7740_CLK_R>,
+ <&cpg_clocks R8A7740_CLK_HP>,
+ <&sub_clk>,
+ <&cpg_clocks R8A7740_CLK_HP>,
+ <&cpg_clocks R8A7740_CLK_HP>,
+ <&cpg_clocks R8A7740_CLK_HP>,
+ <&cpg_clocks R8A7740_CLK_HP>,
+ <&cpg_clocks R8A7740_CLK_HP>,
+ <&cpg_clocks R8A7740_CLK_HP>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <
+ R8A7740_CLK_CMT1 R8A7740_CLK_FSI R8A7740_CLK_IIC1
+ R8A7740_CLK_USBF R8A7740_CLK_SDHI0 R8A7740_CLK_SDHI1
+ R8A7740_CLK_MMC R8A7740_CLK_GETHER R8A7740_CLK_TPU0
+ >;
+ clock-output-names =
+ "cmt1", "fsi", "iic1", "usbf", "sdhi0", "sdhi1",
+ "mmc", "gether", "tpu0";
+ };
+ mstp4_clks: mstp4_clks@e6150140 {
+ compatible = "renesas,r8a7740-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0xe6150140 4>, <0xe615004c 4>;
+ clocks = <&cpg_clocks R8A7740_CLK_HP>,
+ <&cpg_clocks R8A7740_CLK_HP>,
+ <&cpg_clocks R8A7740_CLK_HP>,
+ <&cpg_clocks R8A7740_CLK_HP>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <
+ R8A7740_CLK_USBH R8A7740_CLK_SDHI2
+ R8A7740_CLK_USBFUNC R8A7740_CLK_USBPHY
+ >;
+ clock-output-names =
+ "usbhost", "sdhi2", "usbfunc", "usphy";
+ };
+ };
};
interrupt-parent = <&gic>;
cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
cpu@0 {
+ device_type = "cpu";
compatible = "arm,cortex-a9";
+ reg = <0>;
+ clock-frequency = <800000000>;
};
};
clock-frequency = <31250000>;
};
+&tmu0 {
+ status = "okay";
+};
+
&pfc {
lan0_pins: lan0 {
intc {
scif0: serial@ffe40000 {
compatible = "renesas,scif-r8a7779", "renesas,scif";
reg = <0xffe40000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg_clocks R8A7779_CLK_P>;
clock-names = "sci_ick";
scif1: serial@ffe41000 {
compatible = "renesas,scif-r8a7779", "renesas,scif";
reg = <0xffe41000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg_clocks R8A7779_CLK_P>;
clock-names = "sci_ick";
scif2: serial@ffe42000 {
compatible = "renesas,scif-r8a7779", "renesas,scif";
reg = <0xffe42000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg_clocks R8A7779_CLK_P>;
clock-names = "sci_ick";
scif3: serial@ffe43000 {
compatible = "renesas,scif-r8a7779", "renesas,scif";
reg = <0xffe43000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg_clocks R8A7779_CLK_P>;
clock-names = "sci_ick";
scif4: serial@ffe44000 {
compatible = "renesas,scif-r8a7779", "renesas,scif";
reg = <0xffe44000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg_clocks R8A7779_CLK_P>;
clock-names = "sci_ick";
scif5: serial@ffe45000 {
compatible = "renesas,scif-r8a7779", "renesas,scif";
reg = <0xffe45000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg_clocks R8A7779_CLK_P>;
clock-names = "sci_ick";
};
thermal@ffc48000 {
- compatible = "renesas,rcar-thermal";
+ compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal";
reg = <0xffc48000 0x38>;
};
+ tmu0: timer@ffd80000 {
+ compatible = "renesas,tmu-r8a7779", "renesas,tmu";
+ reg = <0xffd80000 0x30>;
+ interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>,
+ <0 33 IRQ_TYPE_LEVEL_HIGH>,
+ <0 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks R8A7779_CLK_TMU0>;
+ clock-names = "fck";
+
+ #renesas,channels = <3>;
+
+ status = "disabled";
+ };
+
+ tmu1: timer@ffd81000 {
+ compatible = "renesas,tmu-r8a7779", "renesas,tmu";
+ reg = <0xffd81000 0x30>;
+ interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>,
+ <0 37 IRQ_TYPE_LEVEL_HIGH>,
+ <0 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks R8A7779_CLK_TMU1>;
+ clock-names = "fck";
+
+ #renesas,channels = <3>;
+
+ status = "disabled";
+ };
+
+ tmu2: timer@ffd82000 {
+ compatible = "renesas,tmu-r8a7779", "renesas,tmu";
+ reg = <0xffd82000 0x30>;
+ interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>,
+ <0 41 IRQ_TYPE_LEVEL_HIGH>,
+ <0 42 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks R8A7779_CLK_TMU2>;
+ clock-names = "fck";
+
+ #renesas,channels = <3>;
+
+ status = "disabled";
+ };
+
sata: sata@fc600000 {
compatible = "renesas,rcar-sata";
reg = <0xfc600000 0x2000>;
/* Gate clocks */
mstp0_clks: clocks@ffc80030 {
compatible = "renesas,r8a7779-mstp-clocks",
- "renesas,cpg-mstp-clocks";
+ "renesas,cpg-mstp-clocks";
reg = <0xffc80030 4>;
clocks = <&cpg_clocks R8A7779_CLK_S>,
- <&cpg_clocks R8A7779_CLK_P>,
+ <&cpg_clocks R8A7779_CLK_P>,
<&cpg_clocks R8A7779_CLK_P>,
<&cpg_clocks R8A7779_CLK_P>,
<&cpg_clocks R8A7779_CLK_S>,
};
mstp1_clks: clocks@ffc80034 {
compatible = "renesas,r8a7779-mstp-clocks",
- "renesas,cpg-mstp-clocks";
+ "renesas,cpg-mstp-clocks";
reg = <0xffc80034 4>, <0xffc80044 4>;
clocks = <&cpg_clocks R8A7779_CLK_P>,
<&cpg_clocks R8A7779_CLK_P>,
};
mstp3_clks: clocks@ffc8003c {
compatible = "renesas,r8a7779-mstp-clocks",
- "renesas,cpg-mstp-clocks";
+ "renesas,cpg-mstp-clocks";
reg = <0xffc8003c 4>;
clocks = <&s4_clk>, <&s4_clk>, <&s4_clk>, <&s4_clk>,
<&s4_clk>, <&s4_clk>;
reg = <0 0x40000000 0 0x40000000>;
};
- memory@180000000 {
+ memory@140000000 {
device_type = "memory";
reg = <1 0x40000000 0 0xc0000000>;
};
renesas,groups = "usb2";
renesas,function = "usb2";
};
+
+ vin1_pins: vin {
+ renesas,groups = "vin1_data8", "vin1_clk";
+ renesas,function = "vin1";
+ };
};
ðer {
};
};
+&cmt0 {
+ status = "ok";
+};
+
&mmcif1 {
pinctrl-0 = <&mmc1_pins>;
pinctrl-names = "default";
status = "ok";
pinctrl-0 = <&iic2_pins>;
pinctrl-names = "default";
+
+ composite-in@20 {
+ compatible = "adi,adv7180";
+ reg = <0x20>;
+ remote = <&vin1>;
+
+ port {
+ adv7180: endpoint {
+ bus-width = <8>;
+ remote-endpoint = <&vin1ep0>;
+ };
+ };
+ };
};
&iic3 {
status = "okay";
vdd_dvfs: regulator@68 {
- compatible = "diasemi,da9210";
+ compatible = "dlg,da9210";
reg = <0x68>;
regulator-min-microvolt = <1000000>;
pinctrl-0 = <&usb2_pins>;
pinctrl-names = "default";
};
+
+/* composite video input */
+&vin1 {
+ pinctrl-0 = <&vin1_pins>;
+ pinctrl-names = "default";
+
+ status = "ok";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vin1ep0: endpoint {
+ remote-endpoint = <&adv7180>;
+ bus-width = <8>;
+ };
+ };
+};
spi2 = &msiof1;
spi3 = &msiof2;
spi4 = &msiof3;
+ vin0 = &vin0;
+ vin1 = &vin1;
+ vin2 = &vin2;
+ vin3 = &vin3;
};
cpus {
<1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
+ cmt0: timer@ffca0000 {
+ compatible = "renesas,cmt-48-r8a7790", "renesas,cmt-48-gen2";
+ reg = <0 0xffca0000 0 0x1004>;
+ interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
+ <0 143 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7790_CLK_CMT0>;
+ clock-names = "fck";
+
+ renesas,channels-mask = <0x60>;
+
+ status = "disabled";
+ };
+
+ cmt1: timer@e6130000 {
+ compatible = "renesas,cmt-48-r8a7790", "renesas,cmt-48-gen2";
+ reg = <0 0xe6130000 0 0x1004>;
+ interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
+ <0 121 IRQ_TYPE_LEVEL_HIGH>,
+ <0 122 IRQ_TYPE_LEVEL_HIGH>,
+ <0 123 IRQ_TYPE_LEVEL_HIGH>,
+ <0 124 IRQ_TYPE_LEVEL_HIGH>,
+ <0 125 IRQ_TYPE_LEVEL_HIGH>,
+ <0 126 IRQ_TYPE_LEVEL_HIGH>,
+ <0 127 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7790_CLK_CMT1>;
+ clock-names = "fck";
+
+ renesas,channels-mask = <0xff>;
+
+ status = "disabled";
+ };
+
irqc0: interrupt-controller@e61c0000 {
compatible = "renesas,irqc-r8a7790", "renesas,irqc";
#interrupt-cells = <2>;
<0 3 IRQ_TYPE_LEVEL_HIGH>;
};
+ dmac0: dma-controller@e6700000 {
+ compatible = "renesas,rcar-dmac";
+ reg = <0 0xe6700000 0 0x20000>;
+ interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
+ 0 200 IRQ_TYPE_LEVEL_HIGH
+ 0 201 IRQ_TYPE_LEVEL_HIGH
+ 0 202 IRQ_TYPE_LEVEL_HIGH
+ 0 203 IRQ_TYPE_LEVEL_HIGH
+ 0 204 IRQ_TYPE_LEVEL_HIGH
+ 0 205 IRQ_TYPE_LEVEL_HIGH
+ 0 206 IRQ_TYPE_LEVEL_HIGH
+ 0 207 IRQ_TYPE_LEVEL_HIGH
+ 0 208 IRQ_TYPE_LEVEL_HIGH
+ 0 209 IRQ_TYPE_LEVEL_HIGH
+ 0 210 IRQ_TYPE_LEVEL_HIGH
+ 0 211 IRQ_TYPE_LEVEL_HIGH
+ 0 212 IRQ_TYPE_LEVEL_HIGH
+ 0 213 IRQ_TYPE_LEVEL_HIGH
+ 0 214 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC0>;
+ clock-names = "fck";
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
+
+ dmac1: dma-controller@e6720000 {
+ compatible = "renesas,rcar-dmac";
+ reg = <0 0xe6720000 0 0x20000>;
+ interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
+ 0 216 IRQ_TYPE_LEVEL_HIGH
+ 0 217 IRQ_TYPE_LEVEL_HIGH
+ 0 218 IRQ_TYPE_LEVEL_HIGH
+ 0 219 IRQ_TYPE_LEVEL_HIGH
+ 0 308 IRQ_TYPE_LEVEL_HIGH
+ 0 309 IRQ_TYPE_LEVEL_HIGH
+ 0 310 IRQ_TYPE_LEVEL_HIGH
+ 0 311 IRQ_TYPE_LEVEL_HIGH
+ 0 312 IRQ_TYPE_LEVEL_HIGH
+ 0 313 IRQ_TYPE_LEVEL_HIGH
+ 0 314 IRQ_TYPE_LEVEL_HIGH
+ 0 315 IRQ_TYPE_LEVEL_HIGH
+ 0 316 IRQ_TYPE_LEVEL_HIGH
+ 0 317 IRQ_TYPE_LEVEL_HIGH
+ 0 318 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC1>;
+ clock-names = "fck";
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
i2c0: i2c@e6508000 {
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
+ vin0: video@e6ef0000 {
+ compatible = "renesas,vin-r8a7790";
+ clocks = <&mstp8_clks R8A7790_CLK_VIN0>;
+ reg = <0 0xe6ef0000 0 0x1000>;
+ interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ vin1: video@e6ef1000 {
+ compatible = "renesas,vin-r8a7790";
+ clocks = <&mstp8_clks R8A7790_CLK_VIN1>;
+ reg = <0 0xe6ef1000 0 0x1000>;
+ interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ vin2: video@e6ef2000 {
+ compatible = "renesas,vin-r8a7790";
+ clocks = <&mstp8_clks R8A7790_CLK_VIN2>;
+ reg = <0 0xe6ef2000 0 0x1000>;
+ interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ vin3: video@e6ef3000 {
+ compatible = "renesas,vin-r8a7790";
+ clocks = <&mstp8_clks R8A7790_CLK_VIN3>;
+ reg = <0 0xe6ef3000 0 0x1000>;
+ interrupts = <0 191 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
clocks {
#address-cells = <2>;
#size-cells = <2>;
mstp1_clks: mstp1_clks@e6150134 {
compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>;
- clocks = <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>,
+ clocks = <&m2_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>,
<&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>,
<&zs_clk>;
#clock-cells = <1>;
renesas,clock-indices = <
- R8A7790_CLK_TMU1 R8A7790_CLK_TMU3 R8A7790_CLK_TMU2
+ R8A7790_CLK_JPU R8A7790_CLK_TMU1 R8A7790_CLK_TMU3 R8A7790_CLK_TMU2
R8A7790_CLK_CMT0 R8A7790_CLK_TMU0 R8A7790_CLK_VSP1_DU1
R8A7790_CLK_VSP1_DU0 R8A7790_CLK_VSP1_R R8A7790_CLK_VSP1_S
>;
clock-output-names =
- "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1",
+ "jpu", "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1",
"vsp1-du0", "vsp1-rt", "vsp1-sy";
};
mstp2_clks: mstp2_clks@e6150138 {
compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>,
- <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>;
+ <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&zs_clk>,
+ <&zs_clk>;
#clock-cells = <1>;
renesas,clock-indices = <
R8A7790_CLK_SCIFA2 R8A7790_CLK_SCIFA1 R8A7790_CLK_SCIFA0
R8A7790_CLK_MSIOF2 R8A7790_CLK_SCIFB0 R8A7790_CLK_SCIFB1
R8A7790_CLK_MSIOF1 R8A7790_CLK_MSIOF3 R8A7790_CLK_SCIFB2
+ R8A7790_CLK_SYS_DMAC1 R8A7790_CLK_SYS_DMAC0
>;
clock-output-names =
"scifa2", "scifa1", "scifa0", "msiof2", "scifb0",
- "scifb1", "msiof1", "msiof3", "scifb2";
+ "scifb1", "msiof1", "msiof3", "scifb2",
+ "sys-dmac1", "sys-dmac0";
};
mstp3_clks: mstp3_clks@e615013c {
compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6b10000 0 0x2c>;
interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_QSPI_MOD>;
+ dmas = <&dmac0 0x17>, <&dmac0 0x18>;
+ dma-names = "tx", "rx";
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
msiof0: spi@e6e20000 {
compatible = "renesas,msiof-r8a7790";
- reg = <0 0xe6e20000 0 0x0064>;
+ reg = <0 0xe6e20000 0 0x0064>, <0 0xe7e20000 0 0x0064>;
interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>;
+ dmas = <&dmac0 0x51>, <&dmac0 0x52>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
msiof1: spi@e6e10000 {
compatible = "renesas,msiof-r8a7790";
- reg = <0 0xe6e10000 0 0x0064>;
+ reg = <0 0xe6e10000 0 0x0064>, <0 0xe7e10000 0 0x0064>;
interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>;
+ dmas = <&dmac0 0x55>, <&dmac0 0x56>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
msiof2: spi@e6e00000 {
compatible = "renesas,msiof-r8a7790";
- reg = <0 0xe6e00000 0 0x0064>;
+ reg = <0 0xe6e00000 0 0x0064>, <0 0xe7e00000 0 0x0064>;
interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>;
+ dmas = <&dmac0 0x41>, <&dmac0 0x42>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
msiof3: spi@e6c90000 {
compatible = "renesas,msiof-r8a7790";
- reg = <0 0xe6c90000 0 0x0064>;
+ reg = <0 0xe6c90000 0 0x0064>, <0 0xe7c90000 0 0x0064>;
interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>;
+ dmas = <&dmac0 0x45>, <&dmac0 0x46>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
rcar_sound: rcar_sound@0xec500000 {
#sound-dai-cells = <1>;
compatible = "renesas,rcar_sound-r8a7790", "renesas,rcar_sound-gen2", "renesas,rcar_sound";
- interrupt-parent = <&gic>;
reg = <0 0xec500000 0 0x1000>, /* SCU */
<0 0xec5a0000 0 0x100>, /* ADG */
<0 0xec540000 0 0x1000>, /* SSIU */
renesas,groups = "usb1";
renesas,function = "usb1";
};
+
+ vin0_pins: vin0 {
+ renesas,groups = "vin0_data8", "vin0_clk";
+ renesas,function = "vin0";
+ };
};
&scif0 {
status = "okay";
clock-frequency = <400000>;
+
+ composite-in@20 {
+ compatible = "adi,adv7180";
+ reg = <0x20>;
+ remote = <&vin0>;
+
+ port {
+ adv7180: endpoint {
+ bus-width = <8>;
+ remote-endpoint = <&vin0ep>;
+ };
+ };
+ };
};
&qspi {
&pciec {
status = "okay";
};
+
+/* composite video input */
+&vin0 {
+ status = "ok";
+ pinctrl-0 = <&vin0_pins>;
+ pinctrl-names = "default";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vin0ep: endpoint {
+ remote-endpoint = <&adv7180>;
+ bus-width = <8>;
+ };
+ };
+};
renesas,groups = "usb1";
renesas,function = "usb1";
};
+
+ vin1_pins: vin1 {
+ renesas,groups = "vin1_data8", "vin1_clk";
+ renesas,function = "vin1";
+ };
};
ðer {
};
};
+&cmt0 {
+ status = "ok";
+};
+
&sata0 {
status = "okay";
};
status = "okay";
clock-frequency = <400000>;
+ composite-in@20 {
+ compatible = "adi,adv7180";
+ reg = <0x20>;
+ remote = <&vin1>;
+
+ port {
+ adv7180: endpoint {
+ bus-width = <8>;
+ remote-endpoint = <&vin1ep>;
+ };
+ };
+ };
+
eeprom@50 {
compatible = "renesas,24c02";
reg = <0x50>;
clock-frequency = <100000>;
vdd_dvfs: regulator@68 {
- compatible = "diasemi,da9210";
+ compatible = "dlg,da9210";
reg = <0x68>;
regulator-min-microvolt = <1000000>;
&cpu0 {
cpu0-supply = <&vdd_dvfs>;
};
+
+/* composite video input */
+&vin1 {
+ status = "ok";
+ pinctrl-0 = <&vin1_pins>;
+ pinctrl-names = "default";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vin1ep: endpoint {
+ remote-endpoint = <&adv7180>;
+ bus-width = <8>;
+ };
+ };
+};
spi1 = &msiof0;
spi2 = &msiof1;
spi3 = &msiof2;
+ vin0 = &vin0;
+ vin1 = &vin1;
+ vin2 = &vin2;
};
cpus {
<1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
+ cmt0: timer@ffca0000 {
+ compatible = "renesas,cmt-48-r8a7791", "renesas,cmt-48-gen2";
+ reg = <0 0xffca0000 0 0x1004>;
+ interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
+ <0 143 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7791_CLK_CMT0>;
+ clock-names = "fck";
+
+ renesas,channels-mask = <0x60>;
+
+ status = "disabled";
+ };
+
+ cmt1: timer@e6130000 {
+ compatible = "renesas,cmt-48-r8a7791", "renesas,cmt-48-gen2";
+ reg = <0 0xe6130000 0 0x1004>;
+ interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
+ <0 121 IRQ_TYPE_LEVEL_HIGH>,
+ <0 122 IRQ_TYPE_LEVEL_HIGH>,
+ <0 123 IRQ_TYPE_LEVEL_HIGH>,
+ <0 124 IRQ_TYPE_LEVEL_HIGH>,
+ <0 125 IRQ_TYPE_LEVEL_HIGH>,
+ <0 126 IRQ_TYPE_LEVEL_HIGH>,
+ <0 127 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7791_CLK_CMT1>;
+ clock-names = "fck";
+
+ renesas,channels-mask = <0xff>;
+
+ status = "disabled";
+ };
+
irqc0: interrupt-controller@e61c0000 {
compatible = "renesas,irqc-r8a7791", "renesas,irqc";
#interrupt-cells = <2>;
<0 17 IRQ_TYPE_LEVEL_HIGH>;
};
+ dmac0: dma-controller@e6700000 {
+ compatible = "renesas,rcar-dmac";
+ reg = <0 0xe6700000 0 0x20000>;
+ interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
+ 0 200 IRQ_TYPE_LEVEL_HIGH
+ 0 201 IRQ_TYPE_LEVEL_HIGH
+ 0 202 IRQ_TYPE_LEVEL_HIGH
+ 0 203 IRQ_TYPE_LEVEL_HIGH
+ 0 204 IRQ_TYPE_LEVEL_HIGH
+ 0 205 IRQ_TYPE_LEVEL_HIGH
+ 0 206 IRQ_TYPE_LEVEL_HIGH
+ 0 207 IRQ_TYPE_LEVEL_HIGH
+ 0 208 IRQ_TYPE_LEVEL_HIGH
+ 0 209 IRQ_TYPE_LEVEL_HIGH
+ 0 210 IRQ_TYPE_LEVEL_HIGH
+ 0 211 IRQ_TYPE_LEVEL_HIGH
+ 0 212 IRQ_TYPE_LEVEL_HIGH
+ 0 213 IRQ_TYPE_LEVEL_HIGH
+ 0 214 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&mstp2_clks R8A7791_CLK_SYS_DMAC0>;
+ clock-names = "fck";
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
+
+ dmac1: dma-controller@e6720000 {
+ compatible = "renesas,rcar-dmac";
+ reg = <0 0xe6720000 0 0x20000>;
+ interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
+ 0 216 IRQ_TYPE_LEVEL_HIGH
+ 0 217 IRQ_TYPE_LEVEL_HIGH
+ 0 218 IRQ_TYPE_LEVEL_HIGH
+ 0 219 IRQ_TYPE_LEVEL_HIGH
+ 0 308 IRQ_TYPE_LEVEL_HIGH
+ 0 309 IRQ_TYPE_LEVEL_HIGH
+ 0 310 IRQ_TYPE_LEVEL_HIGH
+ 0 311 IRQ_TYPE_LEVEL_HIGH
+ 0 312 IRQ_TYPE_LEVEL_HIGH
+ 0 313 IRQ_TYPE_LEVEL_HIGH
+ 0 314 IRQ_TYPE_LEVEL_HIGH
+ 0 315 IRQ_TYPE_LEVEL_HIGH
+ 0 316 IRQ_TYPE_LEVEL_HIGH
+ 0 317 IRQ_TYPE_LEVEL_HIGH
+ 0 318 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&mstp2_clks R8A7791_CLK_SYS_DMAC1>;
+ clock-names = "fck";
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
+
/* The memory map in the User's Manual maps the cores to bus numbers */
i2c0: i2c@e6508000 {
#address-cells = <1>;
status = "disabled";
};
+ vin0: video@e6ef0000 {
+ compatible = "renesas,vin-r8a7791";
+ clocks = <&mstp8_clks R8A7791_CLK_VIN0>;
+ reg = <0 0xe6ef0000 0 0x1000>;
+ interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ vin1: video@e6ef1000 {
+ compatible = "renesas,vin-r8a7791";
+ clocks = <&mstp8_clks R8A7791_CLK_VIN1>;
+ reg = <0 0xe6ef1000 0 0x1000>;
+ interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ vin2: video@e6ef2000 {
+ compatible = "renesas,vin-r8a7791";
+ clocks = <&mstp8_clks R8A7791_CLK_VIN2>;
+ reg = <0 0xe6ef2000 0 0x1000>;
+ interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
clocks {
#address-cells = <2>;
#size-cells = <2>;
mstp1_clks: mstp1_clks@e6150134 {
compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>;
- clocks = <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>,
+ clocks = <&m2_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>,
<&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>;
#clock-cells = <1>;
renesas,clock-indices = <
- R8A7791_CLK_TMU1 R8A7791_CLK_TMU3 R8A7791_CLK_TMU2
+ R8A7791_CLK_JPU R8A7791_CLK_TMU1 R8A7791_CLK_TMU3 R8A7791_CLK_TMU2
R8A7791_CLK_CMT0 R8A7791_CLK_TMU0 R8A7791_CLK_VSP1_DU1
R8A7791_CLK_VSP1_DU0 R8A7791_CLK_VSP1_S
>;
clock-output-names =
- "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1",
+ "jpu", "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1",
"vsp1-du0", "vsp1-sy";
};
mstp2_clks: mstp2_clks@e6150138 {
reg = <0 0xe6b10000 0 0x2c>;
interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>;
+ dmas = <&dmac0 0x17>, <&dmac0 0x18>;
+ dma-names = "tx", "rx";
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
msiof0: spi@e6e20000 {
compatible = "renesas,msiof-r8a7791";
- reg = <0 0xe6e20000 0 0x0064>;
+ reg = <0 0xe6e20000 0 0x0064>, <0 0xe7e20000 0 0x0064>;
interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;
+ dmas = <&dmac0 0x51>, <&dmac0 0x52>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
msiof1: spi@e6e10000 {
compatible = "renesas,msiof-r8a7791";
- reg = <0 0xe6e10000 0 0x0064>;
+ reg = <0 0xe6e10000 0 0x0064>, <0 0xe7e10000 0 0x0064>;
interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>;
+ dmas = <&dmac0 0x55>, <&dmac0 0x56>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
msiof2: spi@e6e00000 {
compatible = "renesas,msiof-r8a7791";
- reg = <0 0xe6e00000 0 0x0064>;
+ reg = <0 0xe6e00000 0 0x0064>, <0 0xe7e00000 0 0x0064>;
interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>;
+ dmas = <&dmac0 0x41>, <&dmac0 0x42>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
rcar_sound: rcar_sound@0xec500000 {
#sound-dai-cells = <1>;
compatible = "renesas,rcar_sound-r8a7791", "renesas,rcar_sound-gen2", "renesas,rcar_sound";
- interrupt-parent = <&gic>;
reg = <0 0xec500000 0 0x1000>, /* SCU */
<0 0xec5a0000 0 0x100>, /* ADG */
<0 0xec540000 0 0x1000>, /* SSIU */
--- /dev/null
+/*
+ * Device Tree Source for the Alt board
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7794.dtsi"
+
+/ {
+ model = "Alt";
+ compatible = "renesas,alt", "renesas,r8a7794";
+
+ aliases {
+ serial0 = &scif2;
+ };
+
+ chosen {
+ bootargs = "console=ttySC0,38400 ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0 0x40000000 0 0x40000000>;
+ };
+
+ lbsc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&extal_clk {
+ clock-frequency = <20000000>;
+};
+
+&cmt0 {
+ status = "ok";
+};
+
+&scif2 {
+ status = "ok";
+};
--- /dev/null
+/*
+ * Device Tree Source for the r8a7794 SoC
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ * Copyright (C) 2014 Ulrich Hecht
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/clock/r8a7794-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ compatible = "renesas,r8a7794";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0>;
+ clock-frequency = <1000000000>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <1>;
+ clock-frequency = <1000000000>;
+ };
+ };
+
+ gic: interrupt-controller@f1001000 {
+ compatible = "arm,cortex-a7-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0 0xf1001000 0 0x1000>,
+ <0 0xf1002000 0 0x1000>,
+ <0 0xf1004000 0 0x2000>,
+ <0 0xf1006000 0 0x2000>;
+ interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ cmt0: timer@ffca0000 {
+ compatible = "renesas,cmt-48-gen2";
+ reg = <0 0xffca0000 0 0x1004>;
+ interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
+ <0 143 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7794_CLK_CMT0>;
+ clock-names = "fck";
+
+ renesas,channels-mask = <0x60>;
+
+ status = "disabled";
+ };
+
+ cmt1: timer@e6130000 {
+ compatible = "renesas,cmt-48-gen2";
+ reg = <0 0xe6130000 0 0x1004>;
+ interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
+ <0 121 IRQ_TYPE_LEVEL_HIGH>,
+ <0 122 IRQ_TYPE_LEVEL_HIGH>,
+ <0 123 IRQ_TYPE_LEVEL_HIGH>,
+ <0 124 IRQ_TYPE_LEVEL_HIGH>,
+ <0 125 IRQ_TYPE_LEVEL_HIGH>,
+ <0 126 IRQ_TYPE_LEVEL_HIGH>,
+ <0 127 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7794_CLK_CMT1>;
+ clock-names = "fck";
+
+ renesas,channels-mask = <0xff>;
+
+ status = "disabled";
+ };
+
+ irqc0: interrupt-controller@e61c0000 {
+ compatible = "renesas,irqc-r8a7794", "renesas,irqc";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0 0xe61c0000 0 0x200>;
+ interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
+ <0 1 IRQ_TYPE_LEVEL_HIGH>,
+ <0 2 IRQ_TYPE_LEVEL_HIGH>,
+ <0 3 IRQ_TYPE_LEVEL_HIGH>,
+ <0 12 IRQ_TYPE_LEVEL_HIGH>,
+ <0 13 IRQ_TYPE_LEVEL_HIGH>,
+ <0 14 IRQ_TYPE_LEVEL_HIGH>,
+ <0 15 IRQ_TYPE_LEVEL_HIGH>,
+ <0 16 IRQ_TYPE_LEVEL_HIGH>,
+ <0 17 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ scifa0: serial@e6c40000 {
+ compatible = "renesas,scifa-r8a7794", "renesas,scifa";
+ reg = <0 0xe6c40000 0 64>;
+ interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7794_CLK_SCIFA0>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scifa1: serial@e6c50000 {
+ compatible = "renesas,scifa-r8a7794", "renesas,scifa";
+ reg = <0 0xe6c50000 0 64>;
+ interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7794_CLK_SCIFA1>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scifa2: serial@e6c60000 {
+ compatible = "renesas,scifa-r8a7794", "renesas,scifa";
+ reg = <0 0xe6c60000 0 64>;
+ interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7794_CLK_SCIFA2>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scifa3: serial@e6c70000 {
+ compatible = "renesas,scifa-r8a7794", "renesas,scifa";
+ reg = <0 0xe6c70000 0 64>;
+ interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp11_clks R8A7794_CLK_SCIFA3>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scifa4: serial@e6c78000 {
+ compatible = "renesas,scifa-r8a7794", "renesas,scifa";
+ reg = <0 0xe6c78000 0 64>;
+ interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp11_clks R8A7794_CLK_SCIFA4>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scifa5: serial@e6c80000 {
+ compatible = "renesas,scifa-r8a7794", "renesas,scifa";
+ reg = <0 0xe6c80000 0 64>;
+ interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp11_clks R8A7794_CLK_SCIFA5>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scifb0: serial@e6c20000 {
+ compatible = "renesas,scifb-r8a7794", "renesas,scifb";
+ reg = <0 0xe6c20000 0 64>;
+ interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7794_CLK_SCIFB0>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scifb1: serial@e6c30000 {
+ compatible = "renesas,scifb-r8a7794", "renesas,scifb";
+ reg = <0 0xe6c30000 0 64>;
+ interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7794_CLK_SCIFB1>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scifb2: serial@e6ce0000 {
+ compatible = "renesas,scifb-r8a7794", "renesas,scifb";
+ reg = <0 0xe6ce0000 0 64>;
+ interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7794_CLK_SCIFB2>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scif0: serial@e6e60000 {
+ compatible = "renesas,scif-r8a7794", "renesas,scif";
+ reg = <0 0xe6e60000 0 64>;
+ interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7794_CLK_SCIF0>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scif1: serial@e6e68000 {
+ compatible = "renesas,scif-r8a7794", "renesas,scif";
+ reg = <0 0xe6e68000 0 64>;
+ interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7794_CLK_SCIF1>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scif2: serial@e6e58000 {
+ compatible = "renesas,scif-r8a7794", "renesas,scif";
+ reg = <0 0xe6e58000 0 64>;
+ interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7794_CLK_SCIF2>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scif3: serial@e6ea8000 {
+ compatible = "renesas,scif-r8a7794", "renesas,scif";
+ reg = <0 0xe6ea8000 0 64>;
+ interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7794_CLK_SCIF3>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scif4: serial@e6ee0000 {
+ compatible = "renesas,scif-r8a7794", "renesas,scif";
+ reg = <0 0xe6ee0000 0 64>;
+ interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7794_CLK_SCIF4>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scif5: serial@e6ee8000 {
+ compatible = "renesas,scif-r8a7794", "renesas,scif";
+ reg = <0 0xe6ee8000 0 64>;
+ interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7794_CLK_SCIF5>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ hscif0: serial@e62c0000 {
+ compatible = "renesas,hscif-r8a7794", "renesas,hscif";
+ reg = <0 0xe62c0000 0 96>;
+ interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7794_CLK_HSCIF0>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ hscif1: serial@e62c8000 {
+ compatible = "renesas,hscif-r8a7794", "renesas,hscif";
+ reg = <0 0xe62c8000 0 96>;
+ interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7794_CLK_HSCIF1>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ hscif2: serial@e62d0000 {
+ compatible = "renesas,hscif-r8a7794", "renesas,hscif";
+ reg = <0 0xe62d0000 0 96>;
+ interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7794_CLK_HSCIF2>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ clocks {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* External root clock */
+ extal_clk: extal_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overriden by the board. */
+ clock-frequency = <0>;
+ clock-output-names = "extal";
+ };
+
+ /* Special CPG clocks */
+ cpg_clocks: cpg_clocks@e6150000 {
+ compatible = "renesas,r8a7794-cpg-clocks",
+ "renesas,rcar-gen2-cpg-clocks";
+ reg = <0 0xe6150000 0 0x1000>;
+ clocks = <&extal_clk>;
+ #clock-cells = <1>;
+ clock-output-names = "main", "pll0", "pll1", "pll3",
+ "lb", "qspi", "sdh", "sd0", "z";
+ };
+
+ /* Fixed factor clocks */
+ pll1_div2_clk: pll1_div2_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ clock-output-names = "pll1_div2";
+ };
+ zg_clk: zg_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <6>;
+ clock-mult = <1>;
+ clock-output-names = "zg";
+ };
+ zx_clk: zx_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <3>;
+ clock-mult = <1>;
+ clock-output-names = "zx";
+ };
+ zs_clk: zs_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <6>;
+ clock-mult = <1>;
+ clock-output-names = "zs";
+ };
+ hp_clk: hp_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <12>;
+ clock-mult = <1>;
+ clock-output-names = "hp";
+ };
+ i_clk: i_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ clock-output-names = "i";
+ };
+ b_clk: b_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <12>;
+ clock-mult = <1>;
+ clock-output-names = "b";
+ };
+ p_clk: p_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <24>;
+ clock-mult = <1>;
+ clock-output-names = "p";
+ };
+ cl_clk: cl_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <48>;
+ clock-mult = <1>;
+ clock-output-names = "cl";
+ };
+ m2_clk: m2_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <8>;
+ clock-mult = <1>;
+ clock-output-names = "m2";
+ };
+ imp_clk: imp_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ clock-output-names = "imp";
+ };
+ rclk_clk: rclk_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <(48 * 1024)>;
+ clock-mult = <1>;
+ clock-output-names = "rclk";
+ };
+ oscclk_clk: oscclk_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <(12 * 1024)>;
+ clock-mult = <1>;
+ clock-output-names = "oscclk";
+ };
+ zb3_clk: zb3_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7794_CLK_PLL3>;
+ #clock-cells = <0>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ clock-output-names = "zb3";
+ };
+ zb3d2_clk: zb3d2_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7794_CLK_PLL3>;
+ #clock-cells = <0>;
+ clock-div = <8>;
+ clock-mult = <1>;
+ clock-output-names = "zb3d2";
+ };
+ ddr_clk: ddr_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7794_CLK_PLL3>;
+ #clock-cells = <0>;
+ clock-div = <8>;
+ clock-mult = <1>;
+ clock-output-names = "ddr";
+ };
+ mp_clk: mp_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&pll1_div2_clk>;
+ #clock-cells = <0>;
+ clock-div = <15>;
+ clock-mult = <1>;
+ clock-output-names = "mp";
+ };
+ cp_clk: cp_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <48>;
+ clock-mult = <1>;
+ clock-output-names = "cp";
+ };
+
+ acp_clk: acp_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&extal_clk>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ clock-output-names = "acp";
+ };
+
+ /* Gate clocks */
+ mstp0_clks: mstp0_clks@e6150130 {
+ compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>;
+ clocks = <&mp_clk>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <R8A7794_CLK_MSIOF0>;
+ clock-output-names = "msiof0";
+ };
+ mstp1_clks: mstp1_clks@e6150134 {
+ compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>;
+ clocks = <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>,
+ <&cp_clk>,
+ <&zs_clk>, <&zs_clk>, <&zs_clk>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <
+ R8A7794_CLK_TMU1 R8A7794_CLK_TMU3 R8A7794_CLK_TMU2
+ R8A7794_CLK_CMT0 R8A7794_CLK_TMU0
+ >;
+ clock-output-names =
+ "tmu1", "tmu3", "tmu2", "cmt0", "tmu0";
+ };
+ mstp2_clks: mstp2_clks@e6150138 {
+ compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
+ clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>,
+ <&mp_clk>, <&mp_clk>, <&mp_clk>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <
+ R8A7794_CLK_SCIFA2 R8A7794_CLK_SCIFA1 R8A7794_CLK_SCIFA0
+ R8A7794_CLK_MSIOF2 R8A7794_CLK_SCIFB0 R8A7794_CLK_SCIFB1
+ R8A7794_CLK_MSIOF1 R8A7794_CLK_SCIFB2
+ >;
+ clock-output-names =
+ "scifa2", "scifa1", "scifa0", "msiof2", "scifb0",
+ "scifb1", "msiof1", "scifb2";
+ };
+ mstp3_clks: mstp3_clks@e615013c {
+ compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
+ clocks = <&rclk_clk>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <
+ R8A7794_CLK_CMT1
+ >;
+ clock-output-names =
+ "cmt1";
+ };
+ mstp7_clks: mstp7_clks@e615014c {
+ compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
+ clocks = <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>,
+ <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <
+ R8A7794_CLK_HSCIF2 R8A7794_CLK_SCIF5
+ R8A7794_CLK_SCIF4 R8A7794_CLK_HSCIF1 R8A7794_CLK_HSCIF0
+ R8A7794_CLK_SCIF3 R8A7794_CLK_SCIF2 R8A7794_CLK_SCIF1
+ R8A7794_CLK_SCIF0
+ >;
+ clock-output-names =
+ "hscif2", "scif5", "scif4", "hscif1", "hscif0",
+ "scif3", "scif2", "scif1", "scif0";
+ };
+ mstp8_clks: mstp8_clks@e6150990 {
+ compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
+ clocks = <&p_clk>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <
+ R8A7794_CLK_ETHER
+ >;
+ clock-output-names =
+ "ether";
+ };
+ mstp11_clks: mstp11_clks@e615099c {
+ compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>;
+ clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <
+ R8A7794_CLK_SCIFA3 R8A7794_CLK_SCIFA4 R8A7794_CLK_SCIFA5
+ >;
+ clock-output-names = "scifa3", "scifa4", "scifa5";
+ };
+ };
+};
compatible = "arm,cortex-a8";
device_type = "cpu";
reg = <0x0>;
+ clock-frequency = <800000000>;
};
};
};
vmmc_sdhi0: regulator@2 {
- compatible = "regulator-fixed";
+ compatible = "regulator-fixed";
regulator-name = "SDHI0 Vcc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
vmmc_sdhi2: regulator@3 {
- compatible = "regulator-fixed";
+ compatible = "regulator-fixed";
regulator-name = "SDHI2 Vcc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
};
+&cmt1 {
+ status = "ok";
+};
+
&i2c0 {
status = "okay";
as3711@40 {
/ {
compatible = "renesas,sh73a0";
+ interrupt-parent = <&gic>;
cpus {
#address-cells = <1>;
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
+ clock-frequency = <1196000000>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
+ clock-frequency = <1196000000>;
};
};
<0 56 IRQ_TYPE_LEVEL_HIGH>;
};
+ cmt1: timer@e6138000 {
+ compatible = "renesas,cmt-48-sh73a0", "renesas,cmt-48";
+ reg = <0xe6138000 0x200>;
+ interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>;
+
+ renesas,channels-mask = <0x3f>;
+
+ status = "disabled";
+ };
+
irqpin0: irqpin@e6900000 {
compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin";
#interrupt-cells = <2>;
<0xe6900020 1>,
<0xe6900040 1>,
<0xe6900060 1>;
- interrupt-parent = <&gic>;
interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH
0 2 IRQ_TYPE_LEVEL_HIGH
0 3 IRQ_TYPE_LEVEL_HIGH
<0xe6900024 1>,
<0xe6900044 1>,
<0xe6900064 1>;
- interrupt-parent = <&gic>;
interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH
0 10 IRQ_TYPE_LEVEL_HIGH
0 11 IRQ_TYPE_LEVEL_HIGH
<0xe6900028 1>,
<0xe6900048 1>,
<0xe6900068 1>;
- interrupt-parent = <&gic>;
interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH
0 18 IRQ_TYPE_LEVEL_HIGH
0 19 IRQ_TYPE_LEVEL_HIGH
<0xe690002c 1>,
<0xe690004c 1>,
<0xe690006c 1>;
- interrupt-parent = <&gic>;
interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH
0 26 IRQ_TYPE_LEVEL_HIGH
0 27 IRQ_TYPE_LEVEL_HIGH
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0xe6820000 0x425>;
- interrupt-parent = <&gic>;
interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH
0 168 IRQ_TYPE_LEVEL_HIGH
0 169 IRQ_TYPE_LEVEL_HIGH
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0xe6822000 0x425>;
- interrupt-parent = <&gic>;
interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH
0 52 IRQ_TYPE_LEVEL_HIGH
0 53 IRQ_TYPE_LEVEL_HIGH
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0xe6824000 0x425>;
- interrupt-parent = <&gic>;
interrupts = <0 171 IRQ_TYPE_LEVEL_HIGH
0 172 IRQ_TYPE_LEVEL_HIGH
0 173 IRQ_TYPE_LEVEL_HIGH
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0xe6826000 0x425>;
- interrupt-parent = <&gic>;
interrupts = <0 183 IRQ_TYPE_LEVEL_HIGH
0 184 IRQ_TYPE_LEVEL_HIGH
0 185 IRQ_TYPE_LEVEL_HIGH
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0xe6828000 0x425>;
- interrupt-parent = <&gic>;
interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH
0 188 IRQ_TYPE_LEVEL_HIGH
0 189 IRQ_TYPE_LEVEL_HIGH
mmcif: mmc@e6bd0000 {
compatible = "renesas,sh-mmcif";
reg = <0xe6bd0000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 140 IRQ_TYPE_LEVEL_HIGH
0 141 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <4>;
sdhi0: sd@ee100000 {
compatible = "renesas,sdhi-sh73a0";
reg = <0xee100000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH
0 84 IRQ_TYPE_LEVEL_HIGH
0 85 IRQ_TYPE_LEVEL_HIGH>;
sdhi1: sd@ee120000 {
compatible = "renesas,sdhi-sh73a0";
reg = <0xee120000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH
0 89 IRQ_TYPE_LEVEL_HIGH>;
toshiba,mmc-wrprotect-disable;
sdhi2: sd@ee140000 {
compatible = "renesas,sdhi-sh73a0";
reg = <0xee140000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH
0 105 IRQ_TYPE_LEVEL_HIGH>;
toshiba,mmc-wrprotect-disable;
scifa0: serial@e6c40000 {
compatible = "renesas,scifa-sh73a0", "renesas,scifa";
reg = <0xe6c40000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
scifa1: serial@e6c50000 {
compatible = "renesas,scifa-sh73a0", "renesas,scifa";
reg = <0xe6c50000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
scifa2: serial@e6c60000 {
compatible = "renesas,scifa-sh73a0", "renesas,scifa";
reg = <0xe6c60000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
scifa3: serial@e6c70000 {
compatible = "renesas,scifa-sh73a0", "renesas,scifa";
reg = <0xe6c70000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
scifa4: serial@e6c80000 {
compatible = "renesas,scifa-sh73a0", "renesas,scifa";
reg = <0xe6c80000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
scifa5: serial@e6cb0000 {
compatible = "renesas,scifa-sh73a0", "renesas,scifa";
reg = <0xe6cb0000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
scifa6: serial@e6cc0000 {
compatible = "renesas,scifa-sh73a0", "renesas,scifa";
reg = <0xe6cc0000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
scifa7: serial@e6cd0000 {
compatible = "renesas,scifa-sh73a0", "renesas,scifa";
reg = <0xe6cd0000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
scifb8: serial@e6c30000 {
compatible = "renesas,scifb-sh73a0", "renesas,scifb";
reg = <0xe6c30000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
#sound-dai-cells = <1>;
compatible = "renesas,sh_fsi2";
reg = <0xec230000 0x400>;
- interrupt-parent = <&gic>;
interrupts = <0 146 0x4>;
status = "disabled";
};
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
CONFIG_SLAB=y
-# CONFIG_BLOCK is not set
CONFIG_ARCH_SHMOBILE_LEGACY=y
CONFIG_ARCH_R8A73A4=y
CONFIG_MACH_APE6EVM=y
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=12
CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_I2C=y
+CONFIG_I2C_SH_MOBILE=y
CONFIG_GPIO_SH_PFC=y
CONFIG_GPIOLIB=y
# CONFIG_HWMON is not set
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_GPIO=y
+CONFIG_REGULATOR_MAX8973=y
# CONFIG_HID is not set
# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_SDHI=y
+CONFIG_MMC_SH_MMCIF=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
+CONFIG_DMADEVICES=y
+CONFIG_SH_DMAE=y
# CONFIG_IOMMU_SUPPORT is not set
# CONFIG_DNOTIFY is not set
CONFIG_TMPFS=y
CONFIG_ARM_APPENDED_DTB=y
CONFIG_VFP=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_SUSPEND is not set
CONFIG_PM_RUNTIME=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_M25P80=y
+CONFIG_MTD_SPI_NOR=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_NETDEVICES=y
# CONFIG_HWMON is not set
CONFIG_I2C=y
CONFIG_I2C_RCAR=y
+CONFIG_GPIO_RCAR=y
CONFIG_REGULATOR=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_CPU_BPREDICT_DISABLE=y
CONFIG_PL310_ERRATA_588369=y
CONFIG_ARM_ERRATA_754322=y
+CONFIG_PCI=y
+CONFIG_PCI_RCAR_GEN2=y
+CONFIG_PCI_RCAR_GEN2_PCIE=y
CONFIG_SMP=y
CONFIG_SCHED_MC=y
CONFIG_NR_CPUS=8
CONFIG_SATA_RCAR=y
CONFIG_MTD=y
CONFIG_MTD_M25P80=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_EEPROM_AT24=y
CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_CADENCE is not set
CONFIG_SERIAL_SH_SCI_NR_UARTS=20
CONFIG_SERIAL_SH_SCI_CONSOLE=y
CONFIG_I2C=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_SH_MOBILE=y
CONFIG_I2C_RCAR=y
CONFIG_SPI=y
CONFIG_SPI_RSPI=y
+CONFIG_SPI_SH_MSIOF=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_RCAR=y
# CONFIG_HWMON is not set
CONFIG_RCAR_THERMAL=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_DA9210=y
CONFIG_REGULATOR_GPIO=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_SOC_CAMERA=y
+CONFIG_SOC_CAMERA_PLATFORM=y
+CONFIG_VIDEO_RCAR_VIN=y
+# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
+CONFIG_VIDEO_ADV7180=y
# CONFIG_HID is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
CONFIG_MMC_SH_MMCIF=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_RS5C372=y
CONFIG_DMADEVICES=y
CONFIG_ARM_ERRATA_460075=y
CONFIG_ARM_ERRATA_743622=y
CONFIG_ARM_ERRATA_754322=y
+CONFIG_PCI=y
+CONFIG_PCI_RCAR_GEN2=y
+CONFIG_PCI_RCAR_GEN2_PCIE=y
CONFIG_HAVE_ARM_ARCH_TIMER=y
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD=y
CONFIG_MTD_M25P80=y
+CONFIG_MTD_SPI_NOR=y
CONFIG_BLK_DEV_SD=y
CONFIG_ATA=y
CONFIG_SATA_RCAR=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=10
CONFIG_SERIAL_SH_SCI_CONSOLE=y
# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
CONFIG_I2C_GPIO=y
+CONFIG_I2C_SH_MOBILE=y
CONFIG_I2C_RCAR=y
CONFIG_SPI=y
CONFIG_SPI_RSPI=y
+CONFIG_SPI_SH_MSIOF=y
CONFIG_GPIO_SH_PFC=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_RCAR=y
CONFIG_RCAR_THERMAL=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_DA9210=y
CONFIG_REGULATOR_GPIO=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_THERMAL=y
CONFIG_RCAR_THERMAL=y
CONFIG_SSB=y
+CONFIG_REGULATOR=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
+CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_EMBEDDED=y
CONFIG_ARCH_SHMOBILE_MULTI=y
CONFIG_ARCH_EMEV2=y
CONFIG_ARCH_R7S72100=y
+CONFIG_ARCH_R8A7740=y
CONFIG_ARCH_R8A7779=y
CONFIG_ARCH_R8A7790=y
CONFIG_ARCH_R8A7791=y
+CONFIG_ARCH_R8A7794=y
CONFIG_MACH_KOELSCH=y
CONFIG_MACH_LAGER=y
CONFIG_MACH_MARZEN=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD=y
CONFIG_MTD_M25P80=y
+CONFIG_MTD_SPI_NOR=y
CONFIG_EEPROM_AT24=y
CONFIG_BLK_DEV_SD=y
CONFIG_ATA=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ST1232=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=20
CONFIG_SERIAL_SH_SCI_CONSOLE=y
CONFIG_I2C_GPIO=y
+CONFIG_I2C_RIIC=y
CONFIG_I2C_SH_MOBILE=y
CONFIG_I2C_RCAR=y
CONFIG_SPI=y
CONFIG_VIDEO_ADV7180=y
CONFIG_DRM=y
CONFIG_DRM_RCAR_DU=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SOC=y
+CONFIG_SND_SOC_SH4_FSI=y
CONFIG_SND_SOC_RCAR=y
+CONFIG_SND_SOC_WM8978=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_S35390A=y
CONFIG_DMADEVICES=y
CONFIG_SH_DMAE=y
# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_PWM=y
+CONFIG_PWM_RENESAS_TPU=y
# CONFIG_DNOTIFY is not set
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
asm volatile("mcr p15, 0, %0, c14, c1, 0" : : "r" (cntkctl));
}
-static inline void arch_counter_set_user_access(void)
-{
- u32 cntkctl = arch_timer_get_cntkctl();
-
- /* Disable user access to both physical/virtual counters/timers */
- /* Also disable virtual event stream */
- cntkctl &= ~(ARCH_TIMER_USR_PT_ACCESS_EN
- | ARCH_TIMER_USR_VT_ACCESS_EN
- | ARCH_TIMER_VIRT_EVT_EN
- | ARCH_TIMER_USR_VCT_ACCESS_EN
- | ARCH_TIMER_USR_PCT_ACCESS_EN);
- arch_timer_set_cntkctl(cntkctl);
-}
-
-static inline void arch_timer_evtstrm_enable(int divider)
-{
- u32 cntkctl = arch_timer_get_cntkctl();
- cntkctl &= ~ARCH_TIMER_EVT_TRIGGER_MASK;
- /* Set the divider and enable virtual event stream */
- cntkctl |= (divider << ARCH_TIMER_EVT_TRIGGER_SHIFT)
- | ARCH_TIMER_VIRT_EVT_EN;
- arch_timer_set_cntkctl(cntkctl);
- elf_hwcap |= HWCAP_EVTSTRM;
-}
-
#endif
#endif
config ARCH_SHMOBILE
bool
+config PM_RCAR
+ bool
+
+config PM_RMOBILE
+ bool
+
+config ARCH_RCAR_GEN1
+ bool
+ select PM_RCAR if PM || SMP
+ select RENESAS_INTC_IRQPIN
+ select SYS_SUPPORTS_SH_TMU
+
+config ARCH_RCAR_GEN2
+ bool
+ select PM_RCAR if PM || SMP
+ select RENESAS_IRQC
+ select SYS_SUPPORTS_SH_CMT
+
+config ARCH_RMOBILE
+ bool
+ select PM_RMOBILE if PM && !ARCH_SHMOBILE_MULTI
+ select SYS_SUPPORTS_SH_CMT
+ select SYS_SUPPORTS_SH_TMU
+
config ARCH_SHMOBILE_MULTI
bool "Renesas ARM SoCs" if ARCH_MULTI_V7
depends on MMU
bool "RZ/A1H (R7S72100)"
select SYS_SUPPORTS_SH_MTU2
+config ARCH_R8A7740
+ bool "R-Mobile A1 (R8A77400)"
+ select ARCH_RMOBILE
+ select RENESAS_INTC_IRQPIN
+
config ARCH_R8A7779
bool "R-Car H1 (R8A77790)"
- select RENESAS_INTC_IRQPIN
- select SYS_SUPPORTS_SH_TMU
+ select ARCH_RCAR_GEN1
config ARCH_R8A7790
bool "R-Car H2 (R8A77900)"
- select RENESAS_IRQC
- select SYS_SUPPORTS_SH_CMT
+ select ARCH_RCAR_GEN2
config ARCH_R8A7791
- bool "R-Car M2 (R8A77910)"
- select RENESAS_IRQC
- select SYS_SUPPORTS_SH_CMT
+ bool "R-Car M2-W (R8A77910)"
+ select ARCH_RCAR_GEN2
-comment "Renesas ARM SoCs Board Type"
+config ARCH_R8A7794
+ bool "R-Car E2 (R8A77940)"
+ select ARCH_RCAR_GEN2
-config MACH_GENMAI
- bool "Genmai board"
- depends on ARCH_R7S72100
+comment "Renesas ARM SoCs Board Type"
config MACH_KOELSCH
bool "Koelsch board"
config ARCH_SH7372
bool "SH-Mobile AP4 (SH7372)"
+ select ARCH_RMOBILE
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_CPU_SUSPEND if PM || CPU_IDLE
- select CPU_V7
- select SH_CLK_CPG
select SH_INTC
- select SYS_SUPPORTS_SH_CMT
- select SYS_SUPPORTS_SH_TMU
config ARCH_SH73A0
bool "SH-Mobile AG5 (R8A73A00)"
+ select ARCH_RMOBILE
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
- select CPU_V7
select I2C
- select SH_CLK_CPG
select SH_INTC
select RENESAS_INTC_IRQPIN
- select SYS_SUPPORTS_SH_CMT
- select SYS_SUPPORTS_SH_TMU
config ARCH_R8A73A4
bool "R-Mobile APE6 (R8A73A40)"
+ select ARCH_RMOBILE
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
- select CPU_V7
- select SH_CLK_CPG
select RENESAS_IRQC
select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP
- select SYS_SUPPORTS_SH_CMT
- select SYS_SUPPORTS_SH_TMU
config ARCH_R8A7740
bool "R-Mobile A1 (R8A77400)"
+ select ARCH_RMOBILE
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
- select CPU_V7
- select SH_CLK_CPG
select RENESAS_INTC_IRQPIN
- select SYS_SUPPORTS_SH_CMT
- select SYS_SUPPORTS_SH_TMU
config ARCH_R8A7778
bool "R-Car M1A (R8A77781)"
+ select ARCH_RCAR_GEN1
select ARCH_WANT_OPTIONAL_GPIOLIB
- select CPU_V7
- select SH_CLK_CPG
select ARM_GIC
- select SYS_SUPPORTS_SH_TMU
- select RENESAS_INTC_IRQPIN
config ARCH_R8A7779
bool "R-Car H1 (R8A77790)"
+ select ARCH_RCAR_GEN1
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
- select CPU_V7
- select SH_CLK_CPG
- select RENESAS_INTC_IRQPIN
- select SYS_SUPPORTS_SH_TMU
config ARCH_R8A7790
bool "R-Car H2 (R8A77900)"
+ select ARCH_RCAR_GEN2
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
- select CPU_V7
select MIGHT_HAVE_PCI
- select SH_CLK_CPG
- select RENESAS_IRQC
select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
- select SYS_SUPPORTS_SH_CMT
config ARCH_R8A7791
- bool "R-Car M2 (R8A77910)"
+ bool "R-Car M2-W (R8A77910)"
+ select ARCH_RCAR_GEN2
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
- select CPU_V7
select MIGHT_HAVE_PCI
- select SH_CLK_CPG
- select RENESAS_IRQC
select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
- select SYS_SUPPORTS_SH_CMT
-
-config ARCH_R7S72100
- bool "RZ/A1H (R7S72100)"
- select ARCH_WANT_OPTIONAL_GPIOLIB
- select ARM_GIC
- select CPU_V7
- select SH_CLK_CPG
- select SYS_SUPPORTS_SH_MTU2
comment "Renesas ARM SoCs Board Type"
select SND_SOC_WM8978 if SND_SIMPLE_CARD
select USE_OF
-config MACH_ARMADILLO800EVA_REFERENCE
- bool "Armadillo-800 EVA board - Reference Device Tree Implementation"
- depends on ARCH_R8A7740
- select ARCH_REQUIRE_GPIOLIB
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- select SMSC_PHY if SH_ETH
- select SND_SOC_WM8978 if SND_SIMPLE_CARD
- select USE_OF
- ---help---
- Use reference implementation of Armadillo800 EVA board support
- which makes greater use of device tree at the expense
- of not supporting a number of devices.
-
- This is intended to aid developers
-
config MACH_BOCKW
bool "BOCK-W platform"
depends on ARCH_R8A7778
This is intended to aid developers
-config MACH_GENMAI
- bool "Genmai board"
- depends on ARCH_R7S72100
- select USE_OF
-
config MACH_MARZEN
bool "MARZEN board"
depends on ARCH_R8A7779
# Makefile for the linux kernel.
#
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/mach-shmobile/include
-
# Common objects
obj-y := timer.o console.o
# CPU objects
-obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o intc-sh7372.o
-obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o intc-sh73a0.o
+obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o intc-sh7372.o pm-sh7372.o
+obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o intc-sh73a0.o pm-sh73a0.o
obj-$(CONFIG_ARCH_R8A73A4) += setup-r8a73a4.o
-obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o
+obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o pm-r8a7740.o
obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o
-obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o
-obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o
-obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o setup-rcar-gen2.o
-obj-$(CONFIG_ARCH_R8A7791) += setup-r8a7791.o setup-rcar-gen2.o
+obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o pm-r8a7779.o
+obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o pm-r8a7790.o
+obj-$(CONFIG_ARCH_R8A7791) += setup-r8a7791.o pm-r8a7791.o
+obj-$(CONFIG_ARCH_R8A7794) += setup-r8a7794.o
obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o
obj-$(CONFIG_ARCH_R7S72100) += setup-r7s72100.o
obj-$(CONFIG_ARCH_R8A7779) += clock-r8a7779.o
obj-$(CONFIG_ARCH_R8A7790) += clock-r8a7790.o
obj-$(CONFIG_ARCH_R8A7791) += clock-r8a7791.o
-obj-$(CONFIG_ARCH_R7S72100) += clock-r7s72100.o
endif
# CPU reset vector handling objects
cpu-y := platsmp.o headsmp.o
-cpu-$(CONFIG_ARCH_R8A7790) += platsmp-apmu.o
-cpu-$(CONFIG_ARCH_R8A7791) += platsmp-apmu.o
+
+# Shared SoC family objects
+obj-$(CONFIG_ARCH_RCAR_GEN2) += setup-rcar-gen2.o platsmp-apmu.o $(cpu-y)
# SMP objects
smp-y := $(cpu-y)
obj-$(CONFIG_SUSPEND) += suspend.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
obj-$(CONFIG_CPU_FREQ) += cpufreq.o
-obj-$(CONFIG_ARCH_SH7372) += pm-sh7372.o sleep-sh7372.o pm-rmobile.o
-obj-$(CONFIG_ARCH_SH73A0) += pm-sh73a0.o
-obj-$(CONFIG_ARCH_R8A7740) += pm-r8a7740.o pm-rmobile.o
-obj-$(CONFIG_ARCH_R8A7779) += pm-r8a7779.o pm-rcar.o
-obj-$(CONFIG_ARCH_R8A7790) += pm-r8a7790.o pm-rcar.o $(cpu-y)
-obj-$(CONFIG_ARCH_R8A7791) += pm-r8a7791.o pm-rcar.o $(cpu-y)
+obj-$(CONFIG_PM_RCAR) += pm-rcar.o
+obj-$(CONFIG_PM_RMOBILE) += pm-rmobile.o
-# IRQ objects
-obj-$(CONFIG_ARCH_SH7372) += entry-intc.o
+# special sh7372 handling for IRQ objects and low level sleep code
+obj-$(CONFIG_ARCH_SH7372) += entry-intc.o sleep-sh7372.o
# Board objects
ifdef CONFIG_ARCH_SHMOBILE_MULTI
-obj-$(CONFIG_MACH_GENMAI) += board-genmai-reference.o
obj-$(CONFIG_MACH_KOELSCH) += board-koelsch-reference.o
obj-$(CONFIG_MACH_LAGER) += board-lager-reference.o
obj-$(CONFIG_MACH_MARZEN) += board-marzen-reference.o
obj-$(CONFIG_MACH_MACKEREL) += board-mackerel.o
obj-$(CONFIG_MACH_BOCKW) += board-bockw.o
obj-$(CONFIG_MACH_BOCKW_REFERENCE) += board-bockw-reference.o
-obj-$(CONFIG_MACH_GENMAI) += board-genmai.o
obj-$(CONFIG_MACH_MARZEN) += board-marzen.o
obj-$(CONFIG_MACH_LAGER) += board-lager.o
obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o
-obj-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += board-armadillo800eva-reference.o
obj-$(CONFIG_MACH_KOELSCH) += board-koelsch.o
obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o
obj-$(CONFIG_MACH_KZM9G_REFERENCE) += board-kzm9g-reference.o
loadaddr-$(CONFIG_MACH_APE6EVM) += 0x40008000
loadaddr-$(CONFIG_MACH_APE6EVM_REFERENCE) += 0x40008000
loadaddr-$(CONFIG_MACH_ARMADILLO800EVA) += 0x40008000
-loadaddr-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += 0x40008000
loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000
-loadaddr-$(CONFIG_MACH_GENMAI) += 0x08008000
loadaddr-$(CONFIG_MACH_KOELSCH) += 0x40008000
loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000
loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000
r8a73a4_add_dt_devices();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
- platform_device_register_simple("cpufreq-cpu0", -1, NULL, 0);
}
static const char *ape6evm_boards_compat_dt[] __initdata = {
};
DT_MACHINE_START(APE6EVM_DT, "ape6evm")
- .init_early = r8a73a4_init_early,
+ .init_early = shmobile_init_delay,
.init_machine = ape6evm_add_standard_devices,
+ .init_late = shmobile_init_late,
.dt_compat = ape6evm_boards_compat_dt,
MACHINE_END
};
DT_MACHINE_START(APE6EVM_DT, "ape6evm")
- .init_early = r8a73a4_init_early,
+ .init_early = shmobile_init_delay,
.init_machine = ape6evm_add_standard_devices,
+ .init_late = shmobile_init_late,
.dt_compat = ape6evm_boards_compat_dt,
MACHINE_END
+++ /dev/null
-/*
- * armadillo 800 eva board support
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- */
-
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/hardware/cache-l2x0.h>
-
-#include "common.h"
-#include "r8a7740.h"
-
-/*
- * CON1 Camera Module
- * CON2 Extension Bus
- * CON3 HDMI Output
- * CON4 Composite Video Output
- * CON5 H-UDI JTAG
- * CON6 ARM JTAG
- * CON7 SD1
- * CON8 SD2
- * CON9 RTC BackUp
- * CON10 Monaural Mic Input
- * CON11 Stereo Headphone Output
- * CON12 Audio Line Output(L)
- * CON13 Audio Line Output(R)
- * CON14 AWL13 Module
- * CON15 Extension
- * CON16 LCD1
- * CON17 LCD2
- * CON19 Power Input
- * CON20 USB1
- * CON21 USB2
- * CON22 Serial
- * CON23 LAN
- * CON24 USB3
- * LED1 Camera LED (Yellow)
- * LED2 Power LED (Green)
- * LED3-LED6 User LED (Yellow)
- * LED7 LAN link LED (Green)
- * LED8 LAN activity LED (Yellow)
- */
-
-/*
- * DipSwitch
- *
- * SW1
- *
- * -12345678-+---------------+----------------------------
- * 1 | boot | hermit
- * 0 | boot | OS auto boot
- * -12345678-+---------------+----------------------------
- * 00 | boot device | eMMC
- * 10 | boot device | SDHI0 (CON7)
- * 01 | boot device | -
- * 11 | boot device | Extension Buss (CS0)
- * -12345678-+---------------+----------------------------
- * 0 | Extension Bus | D8-D15 disable, eMMC enable
- * 1 | Extension Bus | D8-D15 enable, eMMC disable
- * -12345678-+---------------+----------------------------
- * 0 | SDHI1 | COM8 disable, COM14 enable
- * 1 | SDHI1 | COM8 enable, COM14 disable
- * -12345678-+---------------+----------------------------
- * 0 | USB0 | COM20 enable, COM24 disable
- * 1 | USB0 | COM20 disable, COM24 enable
- * -12345678-+---------------+----------------------------
- * 00 | JTAG | SH-X2
- * 10 | JTAG | ARM
- * 01 | JTAG | -
- * 11 | JTAG | Boundary Scan
- *-----------+---------------+----------------------------
- */
-
-/*
- * FSI-WM8978
- *
- * this command is required when playback.
- *
- * # amixer set "Headphone" 50
- *
- * this command is required when capture.
- *
- * # amixer set "Input PGA" 15
- * # amixer set "Left Input Mixer MicP" on
- * # amixer set "Left Input Mixer MicN" on
- * # amixer set "Right Input Mixer MicN" on
- * # amixer set "Right Input Mixer MicP" on
- */
-
-/*
- * USB function
- *
- * When you use USB Function,
- * set SW1.6 ON, and connect cable to CN24.
- *
- * USBF needs workaround on R8A7740 chip.
- * These are a little bit complex.
- * see
- * usbhsf_power_ctrl()
- */
-
-static void __init eva_clock_init(void)
-{
- struct clk *system = clk_get(NULL, "system_clk");
- struct clk *xtal1 = clk_get(NULL, "extal1");
- struct clk *usb24s = clk_get(NULL, "usb24s");
- struct clk *fsibck = clk_get(NULL, "fsibck");
-
- if (IS_ERR(system) ||
- IS_ERR(xtal1) ||
- IS_ERR(usb24s) ||
- IS_ERR(fsibck)) {
- pr_err("armadillo800eva board clock init failed\n");
- goto clock_error;
- }
-
- /* armadillo 800 eva extal1 is 24MHz */
- clk_set_rate(xtal1, 24000000);
-
- /* usb24s use extal1 (= system) clock (= 24MHz) */
- clk_set_parent(usb24s, system);
-
- /* FSIBCK is 12.288MHz, and it is parent of FSI-B */
- clk_set_rate(fsibck, 12288000);
-
-clock_error:
- if (!IS_ERR(system))
- clk_put(system);
- if (!IS_ERR(xtal1))
- clk_put(xtal1);
- if (!IS_ERR(usb24s))
- clk_put(usb24s);
- if (!IS_ERR(fsibck))
- clk_put(fsibck);
-}
-
-/*
- * board init
- */
-static void __init eva_init(void)
-{
- r8a7740_clock_init(MD_CK0 | MD_CK2);
- eva_clock_init();
-
- r8a7740_meram_workaround();
-
-#ifdef CONFIG_CACHE_L2X0
- /* Early BRESP enable, Shared attribute override enable, 32K*8way */
- l2x0_init(IOMEM(0xf0002000), 0x40440000, 0x82000fff);
-#endif
-
- r8a7740_add_standard_devices_dt();
-
- r8a7740_pm_init();
-}
-
-#define RESCNT2 IOMEM(0xe6188020)
-static void eva_restart(enum reboot_mode mode, const char *cmd)
-{
- /* Do soft power on reset */
- writel(1 << 31, RESCNT2);
-}
-
-static const char *eva_boards_compat_dt[] __initdata = {
- "renesas,armadillo800eva-reference",
- NULL,
-};
-
-DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva-reference")
- .map_io = r8a7740_map_io,
- .init_early = shmobile_init_delay,
- .init_irq = r8a7740_init_irq_of,
- .init_machine = eva_init,
- .init_late = shmobile_init_late,
- .dt_compat = eva_boards_compat_dt,
- .restart = eva_restart,
-MACHINE_END
#define GPIO_PORT8CR IOMEM(0xe6050008)
static void __init eva_init(void)
{
+ static struct pm_domain_device domain_devices[] __initdata = {
+ { "A4LC", &lcdc0_device },
+ { "A4LC", &hdmi_lcdc_device },
+ };
struct platform_device *usb = NULL;
regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
platform_add_devices(eva_devices,
ARRAY_SIZE(eva_devices));
- rmobile_add_device_to_domain("A4LC", &lcdc0_device);
- rmobile_add_device_to_domain("A4LC", &hdmi_lcdc_device);
+ rmobile_add_devices_to_domains(domain_devices,
+ ARRAY_SIZE(domain_devices));
if (usb)
rmobile_add_device_to_domain("A3SP", usb);
};
DT_MACHINE_START(BOCKW_DT, "bockw")
- .init_early = r8a7778_init_delay,
+ .init_early = shmobile_init_delay,
.init_irq = r8a7778_init_irq_dt,
.init_machine = bockw_init,
+ .init_late = shmobile_init_late,
.dt_compat = bockw_boards_compat_dt,
MACHINE_END
};
DT_MACHINE_START(BOCKW_DT, "bockw")
- .init_early = r8a7778_init_delay,
+ .init_early = shmobile_init_delay,
.init_irq = r8a7778_init_irq_dt,
.init_machine = bockw_init,
.dt_compat = bockw_boards_compat_dt,
+++ /dev/null
-/*
- * Genmai board support
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/of_platform.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "clock.h"
-#include "common.h"
-#include "r7s72100.h"
-
-/*
- * This is a really crude hack to provide clkdev support to platform
- * devices until they get moved to DT.
- */
-static const struct clk_name clk_names[] = {
- { "mtu2", "fck", "sh-mtu2" },
-};
-
-static void __init genmai_add_standard_devices(void)
-{
- shmobile_clk_workaround(clk_names, ARRAY_SIZE(clk_names), true);
- r7s72100_add_dt_devices();
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static const char * const genmai_boards_compat_dt[] __initconst = {
- "renesas,genmai",
- NULL,
-};
-
-DT_MACHINE_START(GENMAI_DT, "genmai")
- .init_early = shmobile_init_delay,
- .init_machine = genmai_add_standard_devices,
- .dt_compat = genmai_boards_compat_dt,
-MACHINE_END
+++ /dev/null
-/*
- * Genmai board support
- *
- * Copyright (C) 2013-2014 Renesas Solutions Corp.
- * Copyright (C) 2013 Magnus Damm
- * Copyright (C) 2014 Cogent Embedded, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_eth.h>
-#include <linux/spi/rspi.h>
-#include <linux/spi/spi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "irqs.h"
-#include "r7s72100.h"
-
-/* Ether */
-static const struct sh_eth_plat_data ether_pdata __initconst = {
- .phy = 0x00, /* PD60610 */
- .edmac_endian = EDMAC_LITTLE_ENDIAN,
- .phy_interface = PHY_INTERFACE_MODE_MII,
- .no_ether_link = 1
-};
-
-static const struct resource ether_resources[] __initconst = {
- DEFINE_RES_MEM(0xe8203000, 0x800),
- DEFINE_RES_MEM(0xe8204800, 0x200),
- DEFINE_RES_IRQ(gic_iid(359)),
-};
-
-static const struct platform_device_info ether_info __initconst = {
- .parent = &platform_bus,
- .name = "r7s72100-ether",
- .id = -1,
- .res = ether_resources,
- .num_res = ARRAY_SIZE(ether_resources),
- .data = ðer_pdata,
- .size_data = sizeof(ether_pdata),
- .dma_mask = DMA_BIT_MASK(32),
-};
-
-/* RSPI */
-#define RSPI_RESOURCE(idx, baseaddr, irq) \
-static const struct resource rspi##idx##_resources[] __initconst = { \
- DEFINE_RES_MEM(baseaddr, 0x24), \
- DEFINE_RES_IRQ_NAMED(irq, "error"), \
- DEFINE_RES_IRQ_NAMED(irq + 1, "rx"), \
- DEFINE_RES_IRQ_NAMED(irq + 2, "tx"), \
-}
-
-RSPI_RESOURCE(0, 0xe800c800, gic_iid(270));
-RSPI_RESOURCE(1, 0xe800d000, gic_iid(273));
-RSPI_RESOURCE(2, 0xe800d800, gic_iid(276));
-RSPI_RESOURCE(3, 0xe800e000, gic_iid(279));
-RSPI_RESOURCE(4, 0xe800e800, gic_iid(282));
-
-static const struct rspi_plat_data rspi_pdata __initconst = {
- .num_chipselect = 1,
-};
-
-#define r7s72100_register_rspi(idx) \
- platform_device_register_resndata(&platform_bus, "rspi-rz", idx, \
- rspi##idx##_resources, \
- ARRAY_SIZE(rspi##idx##_resources), \
- &rspi_pdata, sizeof(rspi_pdata))
-
-static const struct spi_board_info spi_info[] __initconst = {
- {
- .modalias = "wm8978",
- .max_speed_hz = 5000000,
- .bus_num = 4,
- .chip_select = 0,
- },
-};
-
-/* SCIF */
-#define R7S72100_SCIF(index, baseaddr, irq) \
-static const struct plat_sci_port scif##index##_platform_data = { \
- .type = PORT_SCIF, \
- .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE, \
- .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \
- .scscr = SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE | \
- SCSCR_REIE, \
-}; \
- \
-static struct resource scif##index##_resources[] = { \
- DEFINE_RES_MEM(baseaddr, 0x100), \
- DEFINE_RES_IRQ(irq + 1), \
- DEFINE_RES_IRQ(irq + 2), \
- DEFINE_RES_IRQ(irq + 3), \
- DEFINE_RES_IRQ(irq), \
-} \
-
-R7S72100_SCIF(0, 0xe8007000, gic_iid(221));
-R7S72100_SCIF(1, 0xe8007800, gic_iid(225));
-R7S72100_SCIF(2, 0xe8008000, gic_iid(229));
-R7S72100_SCIF(3, 0xe8008800, gic_iid(233));
-R7S72100_SCIF(4, 0xe8009000, gic_iid(237));
-R7S72100_SCIF(5, 0xe8009800, gic_iid(241));
-R7S72100_SCIF(6, 0xe800a000, gic_iid(245));
-R7S72100_SCIF(7, 0xe800a800, gic_iid(249));
-
-#define r7s72100_register_scif(index) \
- platform_device_register_resndata(&platform_bus, "sh-sci", index, \
- scif##index##_resources, \
- ARRAY_SIZE(scif##index##_resources), \
- &scif##index##_platform_data, \
- sizeof(scif##index##_platform_data))
-
-static void __init genmai_add_standard_devices(void)
-{
- r7s72100_clock_init();
- r7s72100_add_dt_devices();
-
- platform_device_register_full(ðer_info);
-
- r7s72100_register_rspi(0);
- r7s72100_register_rspi(1);
- r7s72100_register_rspi(2);
- r7s72100_register_rspi(3);
- r7s72100_register_rspi(4);
- spi_register_board_info(spi_info, ARRAY_SIZE(spi_info));
-
- r7s72100_register_scif(0);
- r7s72100_register_scif(1);
- r7s72100_register_scif(2);
- r7s72100_register_scif(3);
- r7s72100_register_scif(4);
- r7s72100_register_scif(5);
- r7s72100_register_scif(6);
- r7s72100_register_scif(7);
-}
-
-static const char * const genmai_boards_compat_dt[] __initconst = {
- "renesas,genmai",
- NULL,
-};
-
-DT_MACHINE_START(GENMAI_DT, "genmai")
- .init_early = shmobile_init_delay,
- .init_machine = genmai_add_standard_devices,
- .dt_compat = genmai_boards_compat_dt,
-MACHINE_END
* devices until they get moved to DT.
*/
static const struct clk_name clk_names[] __initconst = {
- { "cmt0", "fck", "sh-cmt-48-gen2.0" },
{ "du0", "du.0", "rcar-du-r8a7791" },
{ "du1", "du.1", "rcar-du-r8a7791" },
{ "lvds0", "lvds.0", "rcar-du-r8a7791" },
static void __init koelsch_add_standard_devices(void)
{
shmobile_clk_workaround(clk_names, ARRAY_SIZE(clk_names), false);
- r8a7791_add_dt_devices();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
koelsch_add_du_device();
static struct sh_mobile_sdhi_info sdhi0_info __initdata = {
.tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
MMC_CAP_POWER_OFF_CARD,
- .tmio_caps2 = MMC_CAP2_NO_MULTI_READ,
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT,
};
static struct sh_mobile_sdhi_info sdhi1_info __initdata = {
.tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
MMC_CAP_POWER_OFF_CARD,
- .tmio_caps2 = MMC_CAP2_NO_MULTI_READ,
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT,
};
static struct sh_mobile_sdhi_info sdhi2_info __initdata = {
.tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
MMC_CAP_POWER_OFF_CARD,
- .tmio_caps2 = MMC_CAP2_NO_MULTI_READ,
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT |
TMIO_MMC_WRPROTECT_DISABLE,
};
DT_MACHINE_START(KZM9G_DT, "kzm9g-reference")
.smp = smp_ops(sh73a0_smp_ops),
.map_io = sh73a0_map_io,
- .init_early = sh73a0_init_delay,
- .nr_irqs = NR_IRQS_LEGACY,
+ .init_early = shmobile_init_delay,
.init_machine = kzm_init,
+ .init_late = shmobile_init_late,
.dt_compat = kzm9g_boards_compat_dt,
MACHINE_END
#include <video/sh_mobile_lcdc.h>
#include "common.h"
+#include "intc.h"
#include "irqs.h"
#include "sh73a0.h"
.smp = smp_ops(sh73a0_smp_ops),
.map_io = sh73a0_map_io,
.init_early = sh73a0_add_early_devices,
- .nr_irqs = NR_IRQS_LEGACY,
.init_irq = sh73a0_init_irq,
.init_machine = kzm_init,
.init_late = shmobile_init_late,
* devices until they get moved to DT.
*/
static const struct clk_name clk_names[] __initconst = {
- { "cmt0", "fck", "sh-cmt-48-gen2.0" },
{ "du0", "du.0", "rcar-du-r8a7790" },
{ "du1", "du.1", "rcar-du-r8a7790" },
{ "du2", "du.2", "rcar-du-r8a7790" },
static void __init lager_add_standard_devices(void)
{
shmobile_clk_workaround(clk_names, ARRAY_SIZE(clk_names), false);
- r8a7790_add_dt_devices();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
lager_add_du_device();
static struct sh_mobile_sdhi_info sdhi0_info __initdata = {
.tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
MMC_CAP_POWER_OFF_CARD,
- .tmio_caps2 = MMC_CAP2_NO_MULTI_READ,
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT |
TMIO_MMC_WRPROTECT_DISABLE,
};
static struct sh_mobile_sdhi_info sdhi2_info __initdata = {
.tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
MMC_CAP_POWER_OFF_CARD,
- .tmio_caps2 = MMC_CAP2_NO_MULTI_READ,
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT |
TMIO_MMC_WRPROTECT_DISABLE,
};
#include <asm/mach-types.h>
#include "common.h"
+#include "intc.h"
#include "irqs.h"
#include "pm-rmobile.h"
#include "sh-gpio.h"
#define USCCR1 IOMEM(0xE6058144)
static void __init mackerel_init(void)
{
- struct pm_domain_device domain_devices[] = {
+ static struct pm_domain_device domain_devices[] __initdata = {
{ "A4LC", &lcdc_device, },
{ "A4LC", &hdmi_lcdc_device, },
{ "A4LC", &meram_device, },
clocksource_of_init();
}
-/*
- * This is a really crude hack to provide clkdev support to platform
- * devices until they get moved to DT.
- */
-static const struct clk_name clk_names[] __initconst = {
- { "tmu0", "fck", "sh-tmu.0" },
-};
-
static void __init marzen_init(void)
{
- shmobile_clk_workaround(clk_names, ARRAY_SIZE(clk_names), false);
- r8a7779_add_standard_devices_dt();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
r8a7779_init_irq_extpin_dt(1); /* IRQ1 as individual interrupt */
}
.map_io = r8a7779_map_io,
.init_early = shmobile_init_delay,
.init_time = marzen_init_timer,
- .nr_irqs = NR_IRQS_LEGACY,
.init_irq = r8a7779_init_irq_dt,
.init_machine = marzen_init,
+ .init_late = shmobile_init_late,
.dt_compat = marzen_boards_compat_dt,
MACHINE_END
+++ /dev/null
-/*
- * r7a72100 clock framework support
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2012 Phil Edworthy
- * Copyright (C) 2011 Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/sh_clk.h>
-#include <linux/clkdev.h>
-
-#include "common.h"
-#include "r7s72100.h"
-
-/* Frequency Control Registers */
-#define FRQCR 0xfcfe0010
-#define FRQCR2 0xfcfe0014
-/* Standby Control Registers */
-#define STBCR3 0xfcfe0420
-#define STBCR4 0xfcfe0424
-#define STBCR7 0xfcfe0430
-#define STBCR9 0xfcfe0438
-#define STBCR10 0xfcfe043c
-
-#define PLL_RATE 30
-
-static struct clk_mapping cpg_mapping = {
- .phys = 0xfcfe0000,
- .len = 0x1000,
-};
-
-/* Fixed 32 KHz root clock for RTC */
-static struct clk r_clk = {
- .rate = 32768,
-};
-
-/*
- * Default rate for the root input clock, reset this with clk_set_rate()
- * from the platform code.
- */
-static struct clk extal_clk = {
- .rate = 13330000,
- .mapping = &cpg_mapping,
-};
-
-static unsigned long pll_recalc(struct clk *clk)
-{
- return clk->parent->rate * PLL_RATE;
-}
-
-static struct sh_clk_ops pll_clk_ops = {
- .recalc = pll_recalc,
-};
-
-static struct clk pll_clk = {
- .ops = &pll_clk_ops,
- .parent = &extal_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static unsigned long bus_recalc(struct clk *clk)
-{
- return clk->parent->rate / 3;
-}
-
-static struct sh_clk_ops bus_clk_ops = {
- .recalc = bus_recalc,
-};
-
-static struct clk bus_clk = {
- .ops = &bus_clk_ops,
- .parent = &pll_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static unsigned long peripheral0_recalc(struct clk *clk)
-{
- return clk->parent->rate / 12;
-}
-
-static struct sh_clk_ops peripheral0_clk_ops = {
- .recalc = peripheral0_recalc,
-};
-
-static struct clk peripheral0_clk = {
- .ops = &peripheral0_clk_ops,
- .parent = &pll_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-static unsigned long peripheral1_recalc(struct clk *clk)
-{
- return clk->parent->rate / 6;
-}
-
-static struct sh_clk_ops peripheral1_clk_ops = {
- .recalc = peripheral1_recalc,
-};
-
-static struct clk peripheral1_clk = {
- .ops = &peripheral1_clk_ops,
- .parent = &pll_clk,
- .flags = CLK_ENABLE_ON_INIT,
-};
-
-struct clk *main_clks[] = {
- &r_clk,
- &extal_clk,
- &pll_clk,
- &bus_clk,
- &peripheral0_clk,
- &peripheral1_clk,
-};
-
-static int div2[] = { 1, 3, 0, 3 }; /* 1, 2/3, reserve, 1/3 */
-static int multipliers[] = { 1, 2, 1, 1 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
- .divisors = div2,
- .nr_divisors = ARRAY_SIZE(div2),
- .multipliers = multipliers,
- .nr_multipliers = ARRAY_SIZE(multipliers),
-};
-
-static struct clk_div4_table div4_table = {
- .div_mult_table = &div4_div_mult_table,
-};
-
-enum { DIV4_I,
- DIV4_NR };
-
-#define DIV4(_reg, _bit, _mask, _flags) \
- SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
-
-/* The mask field specifies the div2 entries that are valid */
-struct clk div4_clks[DIV4_NR] = {
- [DIV4_I] = DIV4(FRQCR, 8, 0xB, CLK_ENABLE_REG_16BIT
- | CLK_ENABLE_ON_INIT),
-};
-
-enum {
- MSTP107, MSTP106, MSTP105, MSTP104, MSTP103,
- MSTP97, MSTP96, MSTP95, MSTP94,
- MSTP74,
- MSTP47, MSTP46, MSTP45, MSTP44, MSTP43, MSTP42, MSTP41, MSTP40,
- MSTP33, MSTP_NR
-};
-
-static struct clk mstp_clks[MSTP_NR] = {
- [MSTP107] = SH_CLK_MSTP8(&peripheral1_clk, STBCR10, 7, 0), /* RSPI0 */
- [MSTP106] = SH_CLK_MSTP8(&peripheral1_clk, STBCR10, 6, 0), /* RSPI1 */
- [MSTP105] = SH_CLK_MSTP8(&peripheral1_clk, STBCR10, 5, 0), /* RSPI2 */
- [MSTP104] = SH_CLK_MSTP8(&peripheral1_clk, STBCR10, 4, 0), /* RSPI3 */
- [MSTP103] = SH_CLK_MSTP8(&peripheral1_clk, STBCR10, 3, 0), /* RSPI4 */
- [MSTP97] = SH_CLK_MSTP8(&peripheral0_clk, STBCR9, 7, 0), /* RIIC0 */
- [MSTP96] = SH_CLK_MSTP8(&peripheral0_clk, STBCR9, 6, 0), /* RIIC1 */
- [MSTP95] = SH_CLK_MSTP8(&peripheral0_clk, STBCR9, 5, 0), /* RIIC2 */
- [MSTP94] = SH_CLK_MSTP8(&peripheral0_clk, STBCR9, 4, 0), /* RIIC3 */
- [MSTP74] = SH_CLK_MSTP8(&peripheral1_clk, STBCR7, 4, 0), /* Ether */
- [MSTP47] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 7, 0), /* SCIF0 */
- [MSTP46] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 6, 0), /* SCIF1 */
- [MSTP45] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 5, 0), /* SCIF2 */
- [MSTP44] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 4, 0), /* SCIF3 */
- [MSTP43] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 3, 0), /* SCIF4 */
- [MSTP42] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 2, 0), /* SCIF5 */
- [MSTP41] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 1, 0), /* SCIF6 */
- [MSTP40] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 0, 0), /* SCIF7 */
- [MSTP33] = SH_CLK_MSTP8(&peripheral0_clk, STBCR3, 3, 0), /* MTU2 */
-};
-
-static struct clk_lookup lookups[] = {
- /* main clocks */
- CLKDEV_CON_ID("rclk", &r_clk),
- CLKDEV_CON_ID("extal", &extal_clk),
- CLKDEV_CON_ID("pll_clk", &pll_clk),
- CLKDEV_CON_ID("peripheral_clk", &peripheral1_clk),
-
- /* DIV4 clocks */
- CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
-
- /* MSTP clocks */
- CLKDEV_DEV_ID("rspi-rz.0", &mstp_clks[MSTP107]),
- CLKDEV_DEV_ID("rspi-rz.1", &mstp_clks[MSTP106]),
- CLKDEV_DEV_ID("rspi-rz.2", &mstp_clks[MSTP105]),
- CLKDEV_DEV_ID("rspi-rz.3", &mstp_clks[MSTP104]),
- CLKDEV_DEV_ID("rspi-rz.4", &mstp_clks[MSTP103]),
- CLKDEV_DEV_ID("r7s72100-ether", &mstp_clks[MSTP74]),
-
- /* ICK */
- CLKDEV_ICK_ID("sci_fck", "sh-sci.0", &mstp_clks[MSTP47]),
- CLKDEV_ICK_ID("sci_fck", "sh-sci.1", &mstp_clks[MSTP46]),
- CLKDEV_ICK_ID("sci_fck", "sh-sci.2", &mstp_clks[MSTP45]),
- CLKDEV_ICK_ID("sci_fck", "sh-sci.3", &mstp_clks[MSTP44]),
- CLKDEV_ICK_ID("sci_fck", "sh-sci.4", &mstp_clks[MSTP43]),
- CLKDEV_ICK_ID("sci_fck", "sh-sci.5", &mstp_clks[MSTP42]),
- CLKDEV_ICK_ID("sci_fck", "sh-sci.6", &mstp_clks[MSTP41]),
- CLKDEV_ICK_ID("sci_fck", "sh-sci.7", &mstp_clks[MSTP40]),
- CLKDEV_ICK_ID("fck", "sh-mtu2", &mstp_clks[MSTP33]),
-};
-
-void __init r7s72100_clock_init(void)
-{
- int k, ret = 0;
-
- for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
- ret = clk_register(main_clks[k]);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
-
- if (!ret)
- ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
- if (!ret)
- shmobile_clk_init();
- else
- panic("failed to setup rza1 clocks\n");
-}
#define __ARCH_MACH_COMMON_H
extern void shmobile_earlytimer_init(void);
-extern void shmobile_setup_delay(unsigned int max_cpu_core_mhz,
- unsigned int mult, unsigned int div);
extern void shmobile_init_delay(void);
struct twd_local_timer;
extern void shmobile_setup_console(void);
((((i) & TS_LOW_BIT) << TS_LOW_SHIFT) |\
(((i) & TS_HI_BIT) << TS_HI_SHIFT))
-#define CHCR_TX(xmit_sz) (DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL((xmit_sz)))
-#define CHCR_RX(xmit_sz) (DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL((xmit_sz)))
+#define CHCR_TX(xmit_sz) (DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL((xmit_sz)))
+#define CHCR_RX(xmit_sz) (DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL((xmit_sz)))
/*
p ## _sense_registers, NULL), \
}
+/* INTCS */
+#define INTCS_VECT_BASE 0x3400
+#define INTCS_VECT(n, vect) INTC_VECT((n), INTCS_VECT_BASE + (vect))
+#define intcs_evt2irq(evt) evt2irq(INTCS_VECT_BASE + (evt))
+
#endif /* __ASM_MACH_INTC_H */
#ifndef __SHMOBILE_IRQS_H
#define __SHMOBILE_IRQS_H
-#include <linux/sh_intc.h>
-#include <mach/irqs.h>
+#include "include/mach/irqs.h"
/* GIC */
#define gic_spi(nr) ((nr) + 32)
#define gic_iid(nr) (nr) /* ICCIAR / interrupt ID */
-/* INTCS */
-#define INTCS_VECT_BASE 0x3400
-#define INTCS_VECT(n, vect) INTC_VECT((n), INTCS_VECT_BASE + (vect))
-#define intcs_evt2irq(evt) evt2irq(INTCS_VECT_BASE + (evt))
-
/* GPIO IRQ */
#define _GPIO_IRQ_BASE 2500
#define GPIO_IRQ_BASE(x) (_GPIO_IRQ_BASE + (32 * x))
#include "common.h"
#include "pm-rmobile.h"
-#ifdef CONFIG_PM
+#if defined(CONFIG_PM) && !defined(CONFIG_ARCH_MULTIPLATFORM)
static int r8a7740_pd_a4s_suspend(void)
{
/*
* The A4S domain contains the CPU core and therefore it should
- * only be turned off if the CPU is in use.
+ * only be turned off if the CPU is not in use.
*/
return -EBUSY;
}
static struct rmobile_pm_domain r8a7740_pm_domains[] = {
{
+ .genpd.name = "A4LC",
+ .bit_shift = 1,
+ }, {
.genpd.name = "A4S",
.bit_shift = 10,
.gov = &pm_domain_always_on_gov,
.no_debug = true,
.suspend = r8a7740_pd_a4s_suspend,
- },
- {
+ }, {
.genpd.name = "A3SP",
.bit_shift = 11,
.gov = &pm_domain_always_on_gov,
.no_debug = true,
.suspend = r8a7740_pd_a3sp_suspend,
},
- {
- .genpd.name = "A4LC",
- .bit_shift = 1,
- },
};
void __init r8a7740_init_pm_domains(void)
rmobile_init_domains(r8a7740_pm_domains, ARRAY_SIZE(r8a7740_pm_domains));
pm_genpd_add_subdomain_names("A4S", "A3SP");
}
-
-#endif /* CONFIG_PM */
+#endif /* CONFIG_PM && !CONFIG_ARCH_MULTIPLATFORM */
#ifdef CONFIG_SUSPEND
static int r8a7740_enter_suspend(suspend_state_t suspend_state)
genpd->dev_ops.stop = pm_clk_suspend;
genpd->dev_ops.start = pm_clk_resume;
genpd->dev_ops.active_wakeup = pd_active_wakeup;
- genpd->dev_irq_safe = true;
genpd->power_off = pd_power_down;
genpd->power_on = pd_power_up;
#define SYSCISR_RETRIES 1000
#define SYSCISR_DELAY_US 1
-#if defined(CONFIG_PM) || defined(CONFIG_SMP)
-
static void __iomem *rcar_sysc_base;
static DEFINE_SPINLOCK(rcar_sysc_lock); /* SMP CPUs + I/O devices */
return rcar_sysc_base;
}
-
-#endif /* CONFIG_PM || CONFIG_SMP */
#define PSTR_RETRIES 100
#define PSTR_DELAY_US 10
-#ifdef CONFIG_PM
static int rmobile_pd_power_down(struct generic_pm_domain *genpd)
{
struct rmobile_pm_domain *rmobile_pd = to_rmobile_pd(genpd);
genpd->dev_ops.stop = pm_clk_suspend;
genpd->dev_ops.start = pm_clk_resume;
genpd->dev_ops.active_wakeup = rmobile_pd_active_wakeup;
- genpd->dev_irq_safe = true;
genpd->power_off = rmobile_pd_power_down;
genpd->power_on = rmobile_pd_power_up;
__rmobile_pd_power_up(rmobile_pd, false);
rmobile_add_device_to_domain_td(data[j].domain_name,
data[j].pdev, &latencies);
}
-#endif /* CONFIG_PM */
struct platform_device *pdev;
};
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_RMOBILE
extern void rmobile_init_domains(struct rmobile_pm_domain domains[], int num);
extern void rmobile_add_device_to_domain_td(const char *domain_name,
struct platform_device *pdev,
static inline void rmobile_add_devices_to_domains(struct pm_domain_device d[],
int size) {}
-#endif /* CONFIG_PM */
+#endif /* CONFIG_PM_RMOBILE */
#endif /* PM_RMOBILE_H */
+++ /dev/null
-#ifndef __ASM_R7S72100_H__
-#define __ASM_R7S72100_H__
-
-void r7s72100_add_dt_devices(void);
-void r7s72100_clock_init(void);
-
-#endif /* __ASM_R7S72100_H__ */
void r8a73a4_add_dt_devices(void);
void r8a73a4_clock_init(void);
void r8a73a4_pinmux_init(void);
-void r8a73a4_init_early(void);
#endif /* __ASM_R8A73A4_H__ */
extern void r8a7740_map_io(void);
extern void r8a7740_add_early_devices(void);
extern void r8a7740_add_standard_devices(void);
-extern void r8a7740_add_standard_devices_dt(void);
extern void r8a7740_clock_init(u8 md_ck);
extern void r8a7740_pinmux_init(void);
extern void r8a7740_pm_init(void);
-#ifdef CONFIG_PM
+#if defined(CONFIG_PM) && !defined(CONFIG_ARCH_MULTIPLATFORM)
extern void __init r8a7740_init_pm_domains(void);
#else
static inline void r8a7740_init_pm_domains(void) {}
-#endif /* CONFIG_PM */
+#endif /* CONFIG_PM && !CONFIG_ARCH_MULTIPLATFORM */
#endif /* __ASM_R8A7740_H__ */
extern void r8a7779_earlytimer_init(void);
extern void r8a7779_add_early_devices(void);
extern void r8a7779_add_standard_devices(void);
-extern void r8a7779_add_standard_devices_dt(void);
extern void r8a7779_init_late(void);
extern u32 r8a7779_read_mode_pins(void);
extern void r8a7779_clock_init(void);
};
void r8a7790_add_standard_devices(void);
-void r8a7790_add_dt_devices(void);
void r8a7790_clock_init(void);
void r8a7790_pinmux_init(void);
void r8a7790_pm_init(void);
#define __ASM_R8A7791_H__
void r8a7791_add_standard_devices(void);
-void r8a7791_add_dt_devices(void);
void r8a7791_clock_init(void);
void r8a7791_pinmux_init(void);
void r8a7791_pm_init(void);
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#include <linux/irq.h>
#include <linux/kernel.h>
-#include <linux/of_platform.h>
-#include <linux/sh_timer.h>
#include <asm/mach/arch.h>
#include "common.h"
-#include "irqs.h"
-#include "r7s72100.h"
-static struct resource mtu2_resources[] __initdata = {
- DEFINE_RES_MEM(0xfcff0000, 0x400),
- DEFINE_RES_IRQ_NAMED(gic_iid(139), "tgi0a"),
-};
-
-#define r7s72100_register_mtu2() \
- platform_device_register_resndata(&platform_bus, "sh-mtu2", \
- -1, mtu2_resources, \
- ARRAY_SIZE(mtu2_resources), \
- NULL, 0)
-
-void __init r7s72100_add_dt_devices(void)
-{
- r7s72100_register_mtu2();
-}
-
-#ifdef CONFIG_USE_OF
static const char *r7s72100_boards_compat_dt[] __initdata = {
"renesas,r7s72100",
NULL,
DT_MACHINE_START(R7S72100_DT, "Generic R7S72100 (Flattened Device Tree)")
.init_early = shmobile_init_delay,
+ .init_late = shmobile_init_late,
.dt_compat = r7s72100_boards_compat_dt,
MACHINE_END
-#endif /* CONFIG_USE_OF */
r8a73a4_register_dmac();
}
-void __init r8a73a4_init_early(void)
-{
-#ifndef CONFIG_ARM_ARCH_TIMER
- shmobile_setup_delay(1500, 2, 4); /* Cortex-A15 @ 1500MHz */
-#endif
-}
-
#ifdef CONFIG_USE_OF
static const char *r8a73a4_boards_compat_dt[] __initdata = {
};
DT_MACHINE_START(R8A73A4_DT, "Generic R8A73A4 (Flattened Device Tree)")
- .init_early = r8a73a4_init_early,
+ .init_early = shmobile_init_delay,
+ .init_late = shmobile_init_late,
.dt_compat = r8a73a4_boards_compat_dt,
MACHINE_END
#endif /* CONFIG_USE_OF */
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#include <asm/hardware/cache-l2x0.h>
#include "common.h"
#include "dma-register.h"
.num_resources = ARRAY_SIZE(ipmmu_resources),
};
-static struct platform_device *r8a7740_devices_dt[] __initdata = {
- &cmt1_device,
-};
-
static struct platform_device *r8a7740_early_devices[] __initdata = {
&scif0_device,
&scif1_device,
&irqpin3_device,
&tmu0_device,
&ipmmu_device,
+ &cmt1_device,
};
/* DMA */
void __init r8a7740_add_standard_devices(void)
{
+ static struct pm_domain_device domain_devices[] __initdata = {
+ { "A3SP", &scif0_device },
+ { "A3SP", &scif1_device },
+ { "A3SP", &scif2_device },
+ { "A3SP", &scif3_device },
+ { "A3SP", &scif4_device },
+ { "A3SP", &scif5_device },
+ { "A3SP", &scif6_device },
+ { "A3SP", &scif7_device },
+ { "A3SP", &scif8_device },
+ { "A3SP", &i2c1_device },
+ };
+
/* I2C work-around */
r8a7740_i2c_workaround(&i2c0_device);
r8a7740_i2c_workaround(&i2c1_device);
/* add devices */
platform_add_devices(r8a7740_early_devices,
ARRAY_SIZE(r8a7740_early_devices));
- platform_add_devices(r8a7740_devices_dt,
- ARRAY_SIZE(r8a7740_devices_dt));
platform_add_devices(r8a7740_late_devices,
ARRAY_SIZE(r8a7740_late_devices));
/* add devices to PM domain */
-
- rmobile_add_device_to_domain("A3SP", &scif0_device);
- rmobile_add_device_to_domain("A3SP", &scif1_device);
- rmobile_add_device_to_domain("A3SP", &scif2_device);
- rmobile_add_device_to_domain("A3SP", &scif3_device);
- rmobile_add_device_to_domain("A3SP", &scif4_device);
- rmobile_add_device_to_domain("A3SP", &scif5_device);
- rmobile_add_device_to_domain("A3SP", &scif6_device);
- rmobile_add_device_to_domain("A3SP", &scif7_device);
- rmobile_add_device_to_domain("A3SP", &scif8_device);
- rmobile_add_device_to_domain("A3SP", &i2c1_device);
+ rmobile_add_devices_to_domains(domain_devices,
+ ARRAY_SIZE(domain_devices));
}
void __init r8a7740_add_early_devices(void)
{
early_platform_add_devices(r8a7740_early_devices,
ARRAY_SIZE(r8a7740_early_devices));
- early_platform_add_devices(r8a7740_devices_dt,
- ARRAY_SIZE(r8a7740_devices_dt));
/* setup early console here as well */
shmobile_setup_console();
#ifdef CONFIG_USE_OF
-void __init r8a7740_add_standard_devices_dt(void)
-{
- platform_add_devices(r8a7740_devices_dt,
- ARRAY_SIZE(r8a7740_devices_dt));
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
void __init r8a7740_init_irq_of(void)
{
void __iomem *intc_prio_base = ioremap_nocache(0xe6900010, 0x10);
static void __init r8a7740_generic_init(void)
{
- r8a7740_clock_init(0);
- r8a7740_add_standard_devices_dt();
+ r8a7740_meram_workaround();
+
+#ifdef CONFIG_CACHE_L2X0
+ /* Shared attribute override enable, 32K*8way */
+ l2x0_init(IOMEM(0xf0002000), 0x00400000, 0xc20f0fff);
+#endif
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+#define RESCNT2 IOMEM(0xe6188020)
+static void r8a7740_restart(enum reboot_mode mode, const char *cmd)
+{
+ /* Do soft power on reset */
+ writel(1 << 31, RESCNT2);
}
static const char *r8a7740_boards_compat_dt[] __initdata = {
.init_machine = r8a7740_generic_init,
.init_late = shmobile_init_late,
.dt_compat = r8a7740_boards_compat_dt,
+ .restart = r8a7740_restart,
MACHINE_END
#endif /* CONFIG_USE_OF */
void __init r8a7778_init_late(void)
{
+ shmobile_init_late();
platform_device_register_full(&ehci_info);
platform_device_register_full(&ohci_info);
}
void __init r8a7778_init_delay(void)
{
- shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */
+ shmobile_init_delay();
}
#ifdef CONFIG_USE_OF
DT_MACHINE_START(R8A7778_DT, "Generic R8A7778 (Flattened Device Tree)")
.init_early = r8a7778_init_delay,
.init_irq = r8a7778_init_irq_dt,
+ .init_late = shmobile_init_late,
.dt_compat = r8a7778_compat_dt,
- .init_late = r8a7778_init_late,
MACHINE_END
#endif /* CONFIG_USE_OF */
sizeof(dma_platform_data));
}
-static struct platform_device *r8a7779_devices_dt[] __initdata = {
+static struct platform_device *r8a7779_early_devices[] __initdata = {
&tmu0_device,
};
r8a7779_init_pm_domains();
- platform_add_devices(r8a7779_devices_dt,
- ARRAY_SIZE(r8a7779_devices_dt));
+ platform_add_devices(r8a7779_early_devices,
+ ARRAY_SIZE(r8a7779_early_devices));
platform_add_devices(r8a7779_standard_devices,
ARRAY_SIZE(r8a7779_standard_devices));
r8a7779_register_hpb_dmae();
void __init r8a7779_add_early_devices(void)
{
- early_platform_add_devices(r8a7779_devices_dt,
- ARRAY_SIZE(r8a7779_devices_dt));
+ early_platform_add_devices(r8a7779_early_devices,
+ ARRAY_SIZE(r8a7779_early_devices));
/* Early serial console setup is not included here due to
* memory map collisions. The SCIF serial ports in r8a7779
__raw_writel(0x003fee3f, INT2SMSKCR4);
}
-void __init r8a7779_add_standard_devices_dt(void)
-{
- platform_add_devices(r8a7779_devices_dt,
- ARRAY_SIZE(r8a7779_devices_dt));
-}
-
#define MODEMR 0xffcc0020
u32 __init r8a7779_read_mode_pins(void)
DT_MACHINE_START(R8A7779_DT, "Generic R8A7779 (Flattened Device Tree)")
.map_io = r8a7779_map_io,
.init_early = shmobile_init_delay,
- .nr_irqs = NR_IRQS_LEGACY,
.init_irq = r8a7779_init_irq_dt,
- .init_machine = r8a7779_add_standard_devices_dt,
- .init_late = r8a7779_init_late,
+ .init_late = shmobile_init_late,
.dt_compat = r8a7779_compat_dt,
MACHINE_END
#endif /* CONFIG_USE_OF */
&cmt##idx##_platform_data, \
sizeof(struct sh_timer_config))
-void __init r8a7790_add_dt_devices(void)
-{
- r8a7790_register_cmt(0);
-}
-
void __init r8a7790_add_standard_devices(void)
{
r8a7790_register_scif(0);
r8a7790_register_scif(7);
r8a7790_register_scif(8);
r8a7790_register_scif(9);
- r8a7790_add_dt_devices();
+ r8a7790_register_cmt(0);
r8a7790_register_irqc(0);
r8a7790_register_thermal();
r8a7790_register_i2c(0);
thermal_resources, \
ARRAY_SIZE(thermal_resources))
-void __init r8a7791_add_dt_devices(void)
-{
- r8a7791_register_cmt(0);
-}
-
void __init r8a7791_add_standard_devices(void)
{
r8a7791_register_scif(0);
r8a7791_register_scif(12);
r8a7791_register_scif(13);
r8a7791_register_scif(14);
- r8a7791_add_dt_devices();
+ r8a7791_register_cmt(0);
r8a7791_register_irqc(0);
r8a7791_register_thermal();
}
--- /dev/null
+/*
+ * r8a7794 processor support
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ * Copyright (C) 2014 Ulrich Hecht
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/of_platform.h>
+#include "common.h"
+#include "rcar-gen2.h"
+#include <asm/mach/arch.h>
+
+static const char * const r8a7794_boards_compat_dt[] __initconst = {
+ "renesas,r8a7794",
+ NULL,
+};
+
+DT_MACHINE_START(R8A7794_DT, "Generic R8A7794 (Flattened Device Tree)")
+ .init_early = shmobile_init_delay,
+ .init_late = shmobile_init_late,
+ .init_time = rcar_gen2_timer_init,
+ .reserve = rcar_gen2_reserve,
+ .dt_compat = r8a7794_boards_compat_dt,
+MACHINE_END
#include "common.h"
#include "dma-register.h"
+#include "intc.h"
#include "irqs.h"
#include "pm-rmobile.h"
#include "sh7372.h"
void __init sh7372_add_standard_devices(void)
{
- struct pm_domain_device domain_devices[] = {
+ static struct pm_domain_device domain_devices[] __initdata = {
{ "A3RV", &vpu_device, },
{ "A4MP", &spu0_device, },
{ "A4MP", &spu1_device, },
void __init sh7372_add_early_devices_dt(void)
{
- shmobile_setup_delay(800, 1, 3); /* Cortex-A8 @ 800MHz */
+ shmobile_init_delay();
sh7372_add_early_devices();
}
DT_MACHINE_START(SH7372_DT, "Generic SH7372 (Flattened Device Tree)")
.map_io = sh7372_map_io,
.init_early = sh7372_add_early_devices_dt,
- .nr_irqs = NR_IRQS_LEGACY,
.init_irq = sh7372_init_irq,
.handle_irq = shmobile_handle_irq_intc,
.init_machine = sh7372_add_standard_devices_dt,
#include "common.h"
#include "dma-register.h"
+#include "intc.h"
#include "irqs.h"
#include "sh73a0.h"
},
};
-static struct platform_device *sh73a0_devices_dt[] __initdata = {
- &cmt1_device,
-};
-
static struct platform_device *sh73a0_early_devices[] __initdata = {
&scif0_device,
&scif1_device,
&scif8_device,
&tmu0_device,
&ipmmu_device,
+ &cmt1_device,
};
static struct platform_device *sh73a0_late_devices[] __initdata = {
/* Clear software reset bit on SY-DMAC module */
__raw_writel(__raw_readl(SRCR2) & ~(1 << 18), SRCR2);
- platform_add_devices(sh73a0_devices_dt,
- ARRAY_SIZE(sh73a0_devices_dt));
platform_add_devices(sh73a0_early_devices,
ARRAY_SIZE(sh73a0_early_devices));
platform_add_devices(sh73a0_late_devices,
void __init sh73a0_init_delay(void)
{
- shmobile_setup_delay(1196, 44, 46); /* Cortex-A9 @ 1196MHz */
+ shmobile_init_delay();
}
/* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */
void __init sh73a0_add_early_devices(void)
{
- early_platform_add_devices(sh73a0_devices_dt,
- ARRAY_SIZE(sh73a0_devices_dt));
early_platform_add_devices(sh73a0_early_devices,
ARRAY_SIZE(sh73a0_early_devices));
void __init sh73a0_add_standard_devices_dt(void)
{
- struct platform_device_info devinfo = { .name = "cpufreq-cpu0", .id = -1, };
-
/* clocks are setup late during boot in the case of DT */
sh73a0_clock_init();
- platform_add_devices(sh73a0_devices_dt,
- ARRAY_SIZE(sh73a0_devices_dt));
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-
- /* Instantiate cpufreq-cpu0 */
- platform_device_register_full(&devinfo);
}
static const char *sh73a0_boards_compat_dt[] __initdata = {
.smp = smp_ops(sh73a0_smp_ops),
.map_io = sh73a0_map_io,
.init_early = sh73a0_init_delay,
- .nr_irqs = NR_IRQS_LEGACY,
.init_machine = sh73a0_add_standard_devices_dt,
+ .init_late = shmobile_init_late,
.dt_compat = sh73a0_boards_compat_dt,
MACHINE_END
#endif /* CONFIG_USE_OF */
#include <linux/delay.h>
#include <linux/of_address.h>
-void __init shmobile_setup_delay_hz(unsigned int max_cpu_core_hz,
- unsigned int mult, unsigned int div)
+static void __init shmobile_setup_delay_hz(unsigned int max_cpu_core_hz,
+ unsigned int mult, unsigned int div)
{
/* calculate a worst-case loops-per-jiffy value
* based on maximum cpu core hz setting and the
preset_lpj = max_cpu_core_hz / value;
}
-void __init shmobile_setup_delay(unsigned int max_cpu_core_mhz,
- unsigned int mult, unsigned int div)
-{
- /* calculate a worst-case loops-per-jiffy value
- * based on maximum cpu core mhz setting and the
- * __delay() implementation in arch/arm/lib/delay.S
- *
- * this will result in a longer delay than expected
- * when the cpu core runs on lower frequencies.
- */
-
- unsigned int value = (1000000 * mult) / (HZ * div);
-
- if (!preset_lpj)
- preset_lpj = max_cpu_core_mhz * value;
-}
-
void __init shmobile_init_delay(void)
{
struct device_node *np, *cpus;
- bool is_a8_a9 = false;
+ bool is_a7_a8_a9 = false;
bool is_a15 = false;
u32 max_freq = 0;
if (!of_property_read_u32(np, "clock-frequency", &freq))
max_freq = max(max_freq, freq);
- if (of_device_is_compatible(np, "arm,cortex-a8") ||
+ if (of_device_is_compatible(np, "arm,cortex-a7") ||
+ of_device_is_compatible(np, "arm,cortex-a8") ||
of_device_is_compatible(np, "arm,cortex-a9"))
- is_a8_a9 = true;
+ is_a7_a8_a9 = true;
else if (of_device_is_compatible(np, "arm,cortex-a15"))
is_a15 = true;
}
if (!max_freq)
return;
- if (is_a8_a9)
+ if (is_a7_a8_a9)
shmobile_setup_delay_hz(max_freq, 1, 3);
else if (is_a15 && !IS_ENABLED(CONFIG_ARM_ARCH_TIMER))
shmobile_setup_delay_hz(max_freq, 2, 4);
obj-y :=
obj-m :=
-obj-n := dummy.o
obj- :=
# Objects we always build independent of SoC choice
asm volatile("msr cntkctl_el1, %0" : : "r" (cntkctl));
}
-static inline void arch_counter_set_user_access(void)
-{
- u32 cntkctl = arch_timer_get_cntkctl();
-
- /* Disable user access to the timers and the physical counter */
- /* Also disable virtual event stream */
- cntkctl &= ~(ARCH_TIMER_USR_PT_ACCESS_EN
- | ARCH_TIMER_USR_VT_ACCESS_EN
- | ARCH_TIMER_VIRT_EVT_EN
- | ARCH_TIMER_USR_PCT_ACCESS_EN);
-
- /* Enable user access to the virtual counter */
- cntkctl |= ARCH_TIMER_USR_VCT_ACCESS_EN;
-
- arch_timer_set_cntkctl(cntkctl);
-}
-
-static inline void arch_timer_evtstrm_enable(int divider)
-{
- u32 cntkctl = arch_timer_get_cntkctl();
- cntkctl &= ~ARCH_TIMER_EVT_TRIGGER_MASK;
- /* Set the divider and enable virtual event stream */
- cntkctl |= (divider << ARCH_TIMER_EVT_TRIGGER_SHIFT)
- | ARCH_TIMER_VIRT_EVT_EN;
- arch_timer_set_cntkctl(cntkctl);
- elf_hwcap |= HWCAP_EVTSTRM;
-#ifdef CONFIG_COMPAT
- compat_elf_hwcap |= COMPAT_HWCAP_EVTSTRM;
-#endif
-}
-
static inline u64 arch_counter_get_cntvct(void)
{
u64 cval;
obj-$(CONFIG_ARCH_R8A7779) += clk-r8a7779.o
obj-$(CONFIG_ARCH_R8A7790) += clk-rcar-gen2.o
obj-$(CONFIG_ARCH_R8A7791) += clk-rcar-gen2.o
+obj-$(CONFIG_ARCH_R8A7794) += clk-rcar-gen2.o
obj-$(CONFIG_ARCH_SHMOBILE_MULTI) += clk-div6.o
obj-$(CONFIG_ARCH_SHMOBILE_MULTI) += clk-mstp.o
-# for emply built-in.o
-obj-n := dummy
};
static const struct clk_div_table cpg_sd01_div_table[] = {
+ { 4, 8 },
{ 5, 12 }, { 6, 16 }, { 7, 18 }, { 8, 24 },
{ 10, 36 }, { 11, 48 }, { 12, 10 }, { 0, 0 },
};
clockevents_config_and_register(clk, arch_timer_rate, 0xf, 0x7fffffff);
}
+static void arch_timer_evtstrm_enable(int divider)
+{
+ u32 cntkctl = arch_timer_get_cntkctl();
+
+ cntkctl &= ~ARCH_TIMER_EVT_TRIGGER_MASK;
+ /* Set the divider and enable virtual event stream */
+ cntkctl |= (divider << ARCH_TIMER_EVT_TRIGGER_SHIFT)
+ | ARCH_TIMER_VIRT_EVT_EN;
+ arch_timer_set_cntkctl(cntkctl);
+ elf_hwcap |= HWCAP_EVTSTRM;
+#ifdef CONFIG_COMPAT
+ compat_elf_hwcap |= COMPAT_HWCAP_EVTSTRM;
+#endif
+}
+
static void arch_timer_configure_evtstream(void)
{
int evt_stream_div, pos;
arch_timer_evtstrm_enable(min(pos, 15));
}
+static void arch_counter_set_user_access(void)
+{
+ u32 cntkctl = arch_timer_get_cntkctl();
+
+ /* Disable user access to the timers and the physical counter */
+ /* Also disable virtual event stream */
+ cntkctl &= ~(ARCH_TIMER_USR_PT_ACCESS_EN
+ | ARCH_TIMER_USR_VT_ACCESS_EN
+ | ARCH_TIMER_VIRT_EVT_EN
+ | ARCH_TIMER_USR_PCT_ACCESS_EN);
+
+ /* Enable user access to the virtual counter */
+ cntkctl |= ARCH_TIMER_USR_VCT_ACCESS_EN;
+
+ arch_timer_set_cntkctl(cntkctl);
+}
+
static int arch_timer_setup(struct clock_event_device *clk)
{
__arch_timer_setup(ARCH_CP15_TIMER, clk);
*/
rate = clk_get_rate(priv->clk);
cdf = rate / 20000000;
- if (cdf >= 1 << cdf_width) {
+ if (cdf >= 1U << cdf_width) {
dev_err(dev, "Input clock %lu too high\n", rate);
return -EIO;
}
return 0;
}
-static int rcar_i2c_prepare_msg(struct rcar_i2c_priv *priv)
+static void rcar_i2c_prepare_msg(struct rcar_i2c_priv *priv)
{
int read = !!rcar_i2c_is_recv(priv);
rcar_i2c_write(priv, ICMSR, 0);
rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_START);
rcar_i2c_write(priv, ICMIER, read ? RCAR_IRQ_RECV : RCAR_IRQ_SEND);
-
- return 0;
}
/*
static irqreturn_t rcar_i2c_irq(int irq, void *ptr)
{
struct rcar_i2c_priv *priv = ptr;
+ irqreturn_t result = IRQ_HANDLED;
u32 msr;
/*-------------- spin lock -----------------*/
/* Only handle interrupts that are currently enabled */
msr &= rcar_i2c_read(priv, ICMIER);
+ if (!msr) {
+ result = IRQ_NONE;
+ goto exit;
+ }
/* Arbitration lost */
if (msr & MAL) {
wake_up(&priv->wait);
}
+exit:
spin_unlock(&priv->lock);
/*-------------- spin unlock -----------------*/
- return IRQ_HANDLED;
+ return result;
}
static int rcar_i2c_master_xfer(struct i2c_adapter *adap,
priv->msg = &msgs[i];
priv->pos = 0;
priv->flags = 0;
- if (priv->msg == &msgs[num - 1])
+ if (i == num - 1)
rcar_i2c_flags_set(priv, ID_LAST_MSG);
- ret = rcar_i2c_prepare_msg(priv);
+ rcar_i2c_prepare_msg(priv);
spin_unlock_irqrestore(&priv->lock, flags);
/*-------------- spin unlock -----------------*/
- if (ret < 0)
- break;
-
timeout = wait_event_timeout(priv->wait,
rcar_i2c_flags_has(priv, ID_DONE),
5 * HZ);
static const struct mfd_cell da9055_devs[] = {
{
- .of_compatible = "dialog,da9055-gpio",
+ .of_compatible = "dlg,da9055-gpio",
.name = "da9055-gpio",
},
{
- .of_compatible = "dialog,da9055-regulator",
+ .of_compatible = "dlg,da9055-regulator",
.name = "da9055-regulator",
.id = 1,
},
{
- .of_compatible = "dialog,da9055-regulator",
+ .of_compatible = "dlg,da9055-regulator",
.name = "da9055-regulator",
.id = 2,
},
{
- .of_compatible = "dialog,da9055-regulator",
+ .of_compatible = "dlg,da9055-regulator",
.name = "da9055-regulator",
.id = 3,
},
{
- .of_compatible = "dialog,da9055-regulator",
+ .of_compatible = "dlg,da9055-regulator",
.name = "da9055-regulator",
.id = 4,
},
{
- .of_compatible = "dialog,da9055-regulator",
+ .of_compatible = "dlg,da9055-regulator",
.name = "da9055-regulator",
.id = 5,
},
{
- .of_compatible = "dialog,da9055-regulator",
+ .of_compatible = "dlg,da9055-regulator",
.name = "da9055-regulator",
.id = 6,
},
{
- .of_compatible = "dialog,da9055-regulator",
+ .of_compatible = "dlg,da9055-regulator",
.name = "da9055-regulator",
.id = 7,
.resources = &da9055_ld05_6_resource,
.num_resources = 1,
},
{
- .of_compatible = "dialog,da9055-regulator",
+ .of_compatible = "dlg,da9055-regulator",
.name = "da9055-regulator",
.resources = &da9055_ld05_6_resource,
.num_resources = 1,
.id = 8,
},
{
- .of_compatible = "dialog,da9055-onkey",
+ .of_compatible = "dlg,da9055-onkey",
.name = "da9055-onkey",
.resources = &da9055_onkey_resource,
.num_resources = 1,
},
{
- .of_compatible = "dialog,da9055-rtc",
+ .of_compatible = "dlg,da9055-rtc",
.name = "da9055-rtc",
.resources = da9055_rtc_resource,
.num_resources = ARRAY_SIZE(da9055_rtc_resource),
},
{
- .of_compatible = "dialog,da9055-hwmon",
+ .of_compatible = "dlg,da9055-hwmon",
.name = "da9055-hwmon",
.resources = &da9055_hwmon_resource,
.num_resources = 1,
},
{
- .of_compatible = "dialog,da9055-watchdog",
+ .of_compatible = "dlg,da9055-watchdog",
.name = "da9055-watchdog",
},
};
-
obj-$(CONFIG_WIMAX_I2400M) += i2400m/
-
-# (from Sam Ravnborg) force kbuild to create built-in.o
-obj- := dummy.o
--- /dev/null
+/*
+ * Copyright 2014 Ulrich Hecht
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_R8A7740_H__
+#define __DT_BINDINGS_CLOCK_R8A7740_H__
+
+/* CPG */
+#define R8A7740_CLK_SYSTEM 0
+#define R8A7740_CLK_PLLC0 1
+#define R8A7740_CLK_PLLC1 2
+#define R8A7740_CLK_PLLC2 3
+#define R8A7740_CLK_R 4
+#define R8A7740_CLK_USB24S 5
+#define R8A7740_CLK_I 6
+#define R8A7740_CLK_ZG 7
+#define R8A7740_CLK_B 8
+#define R8A7740_CLK_M1 9
+#define R8A7740_CLK_HP 10
+#define R8A7740_CLK_HPP 11
+#define R8A7740_CLK_USBP 12
+#define R8A7740_CLK_S 13
+#define R8A7740_CLK_ZB 14
+#define R8A7740_CLK_M3 15
+#define R8A7740_CLK_CP 16
+
+/* MSTP1 */
+#define R8A7740_CLK_CEU21 28
+#define R8A7740_CLK_CEU20 27
+#define R8A7740_CLK_TMU0 25
+#define R8A7740_CLK_LCDC1 17
+#define R8A7740_CLK_IIC0 16
+#define R8A7740_CLK_TMU1 11
+#define R8A7740_CLK_LCDC0 0
+
+/* MSTP2 */
+#define R8A7740_CLK_SCIFA6 30
+#define R8A7740_CLK_SCIFA7 22
+#define R8A7740_CLK_DMAC1 18
+#define R8A7740_CLK_DMAC2 17
+#define R8A7740_CLK_DMAC3 16
+#define R8A7740_CLK_USBDMAC 14
+#define R8A7740_CLK_SCIFA5 7
+#define R8A7740_CLK_SCIFB 6
+#define R8A7740_CLK_SCIFA0 4
+#define R8A7740_CLK_SCIFA1 3
+#define R8A7740_CLK_SCIFA2 2
+#define R8A7740_CLK_SCIFA3 1
+#define R8A7740_CLK_SCIFA4 0
+
+/* MSTP3 */
+#define R8A7740_CLK_CMT1 29
+#define R8A7740_CLK_FSI 28
+#define R8A7740_CLK_IIC1 23
+#define R8A7740_CLK_USBF 20
+#define R8A7740_CLK_SDHI0 14
+#define R8A7740_CLK_SDHI1 13
+#define R8A7740_CLK_MMC 12
+#define R8A7740_CLK_GETHER 9
+#define R8A7740_CLK_TPU0 4
+
+/* MSTP4 */
+#define R8A7740_CLK_USBH 16
+#define R8A7740_CLK_SDHI2 15
+#define R8A7740_CLK_USBFUNC 7
+#define R8A7740_CLK_USBPHY 6
+
+/* SUBCK* */
+#define R8A7740_CLK_SUBCK 9
+#define R8A7740_CLK_SUBCK2 10
+
+#endif /* __DT_BINDINGS_CLOCK_R8A7740_H__ */
#define R8A7790_CLK_MSIOF0 0
/* MSTP1 */
+#define R8A7790_CLK_JPU 6
#define R8A7790_CLK_TMU1 11
#define R8A7790_CLK_TMU3 21
#define R8A7790_CLK_TMU2 22
#define R8A7791_CLK_MSIOF0 0
/* MSTP1 */
+#define R8A7791_CLK_JPU 6
#define R8A7791_CLK_TMU1 11
#define R8A7791_CLK_TMU3 21
#define R8A7791_CLK_TMU2 22
--- /dev/null
+/*
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ * Copyright 2013 Ideas On Board SPRL
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_R8A7794_H__
+#define __DT_BINDINGS_CLOCK_R8A7794_H__
+
+/* CPG */
+#define R8A7794_CLK_MAIN 0
+#define R8A7794_CLK_PLL0 1
+#define R8A7794_CLK_PLL1 2
+#define R8A7794_CLK_PLL3 3
+#define R8A7794_CLK_LB 4
+#define R8A7794_CLK_QSPI 5
+#define R8A7794_CLK_SDH 6
+#define R8A7794_CLK_SD0 7
+#define R8A7794_CLK_Z 8
+
+/* MSTP0 */
+#define R8A7794_CLK_MSIOF0 0
+
+/* MSTP1 */
+#define R8A7794_CLK_TMU1 11
+#define R8A7794_CLK_TMU3 21
+#define R8A7794_CLK_TMU2 22
+#define R8A7794_CLK_CMT0 24
+#define R8A7794_CLK_TMU0 25
+
+/* MSTP2 */
+#define R8A7794_CLK_SCIFA2 2
+#define R8A7794_CLK_SCIFA1 3
+#define R8A7794_CLK_SCIFA0 4
+#define R8A7794_CLK_MSIOF2 5
+#define R8A7794_CLK_SCIFB0 6
+#define R8A7794_CLK_SCIFB1 7
+#define R8A7794_CLK_MSIOF1 8
+#define R8A7794_CLK_SCIFB2 16
+
+/* MSTP3 */
+#define R8A7794_CLK_CMT1 29
+
+/* MSTP5 */
+#define R8A7794_CLK_THERMAL 22
+#define R8A7794_CLK_PWM 23
+
+/* MSTP7 */
+#define R8A7794_CLK_HSCIF2 13
+#define R8A7794_CLK_SCIF5 14
+#define R8A7794_CLK_SCIF4 15
+#define R8A7794_CLK_HSCIF1 16
+#define R8A7794_CLK_HSCIF0 17
+#define R8A7794_CLK_SCIF3 18
+#define R8A7794_CLK_SCIF2 19
+#define R8A7794_CLK_SCIF1 20
+#define R8A7794_CLK_SCIF0 21
+
+/* MSTP8 */
+#define R8A7794_CLK_ETHER 13
+
+/* MSTP9 */
+#define R8A7794_CLK_GPIO6 5
+#define R8A7794_CLK_GPIO5 7
+#define R8A7794_CLK_GPIO4 8
+#define R8A7794_CLK_GPIO3 9
+#define R8A7794_CLK_GPIO2 10
+#define R8A7794_CLK_GPIO1 11
+#define R8A7794_CLK_GPIO0 12
+
+/* MSTP11 */
+#define R8A7794_CLK_SCIFA3 6
+#define R8A7794_CLK_SCIFA4 7
+#define R8A7794_CLK_SCIFA5 8
+
+#endif /* __DT_BINDINGS_CLOCK_R8A7794_H__ */
* which are then pulled up with an external resistor. Setting this
* config will enable open drain mode, the argument is ignored.
* @PIN_CONFIG_DRIVE_OPEN_SOURCE: the pin will be driven with open source
- * (open emitter). Setting this config will enable open drain mode, the
+ * (open emitter). Setting this config will enable open source mode, the
* argument is ignored.
* @PIN_CONFIG_DRIVE_STRENGTH: the pin will sink or source at most the current
* passed as argument. The argument is in mA.
projects / platform / adaptation / renesas_rcar / renesas_kernel.git / commitdiff