board: freescale: ls2080ardb: Enable SD interface for RevF board

LS2080ARDB/LS2088ARDB RevF board has smart voltage translator
which needs to be programmed to enable high speed SD interface
by setting GPIO4_10 output to zero.

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Santan Kumar <santan.kumar@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
index 80c421f..59410aa 100644 (file)
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
@@ -1,6 +1,7 @@
 /*
  * LayerScape Internal Memory Map
  *
+ * Copyright (C) 2017 NXP Semiconductors
  * Copyright 2014 Freescale Semiconductor, Inc.
  *
  * SPDX-License-Identifier:    GPL-2.0+
@@ -45,6 +46,9 @@
 #define I2C2_BASE_ADDR                         (CONFIG_SYS_IMMR + 0x01010000)
 #define I2C3_BASE_ADDR                         (CONFIG_SYS_IMMR + 0x01020000)
 #define I2C4_BASE_ADDR                         (CONFIG_SYS_IMMR + 0x01030000)
+#define GPIO4_BASE_ADDR                                (CONFIG_SYS_IMMR + 0x01330000)
+#define GPIO4_GPDIR_ADDR                       (GPIO4_BASE_ADDR + 0x0)
+#define GPIO4_GPDAT_ADDR                       (GPIO4_BASE_ADDR + 0x8)
 
 #define CONFIG_SYS_XHCI_USB1_ADDR              (CONFIG_SYS_IMMR + 0x02100000)
 #define CONFIG_SYS_XHCI_USB2_ADDR              (CONFIG_SYS_IMMR + 0x02110000)

diff --git a/board/freescale/ls2080ardb/ls2080ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c
index ea05ec6..c2aa101 100644 (file)
--- a/board/freescale/ls2080ardb/ls2080ardb.c
+++ b/board/freescale/ls2080ardb/ls2080ardb.c
@@ -1,4 +1,5 @@
 /*
+ * Copyright (C) 2017 NXP Semiconductors
  * Copyright 2015 Freescale Semiconductor
  *
  * SPDX-License-Identifier:    GPL-2.0+
@@ -205,6 +206,23 @@ int board_early_init_f(void)
 
 int misc_init_r(void)
 {
+#ifdef CONFIG_FSL_QIXIS
+       u8 sw;
+
+       sw = QIXIS_READ(arch);
+       /*
+        * LS2080ARDB/LS2088ARDB RevF board has smart voltage translator
+        * which needs to be programmed to enable high speed SD interface
+        * by setting GPIO4_10 output to zero
+        */
+       if ((sw & 0xf) == 0x5) {
+               out_le32(GPIO4_GPDIR_ADDR, (1 << 21 |
+                                           in_le32(GPIO4_GPDIR_ADDR)));
+               out_le32(GPIO4_GPDAT_ADDR, (~(1 << 21) &
+                                           in_le32(GPIO4_GPDAT_ADDR)));
+       }
+#endif
+
        if (hwconfig("sdhc"))
                config_board_mux(MUX_TYPE_SDHC);