[ Upstream commit
50e63dd8ed92045eb70a72d7ec725488320fb68b ]
Currently, RISC-V sets up reserved memory using the "early" copy of the
device tree. As a result, when trying to get a reserved memory region
using of_reserved_mem_lookup(), the pointer to reserved memory regions
is using the early, pre-virtual-memory address which causes a kernel
panic when trying to use the buffer's name:
Unable to handle kernel paging request at virtual address
00000000401c31ac
Oops [#1]
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 6.0.0-rc1-00001-g0d9d6953d834 #1
Hardware name: Microchip PolarFire-SoC Icicle Kit (DT)
epc : string+0x4a/0xea
ra : vsnprintf+0x1e4/0x336
epc :
ffffffff80335ea0 ra :
ffffffff80338936 sp :
ffffffff81203be0
gp :
ffffffff812e0a98 tp :
ffffffff8120de40 t0 :
0000000000000000
t1 :
ffffffff81203e28 t2 :
7265736572203a46 s0 :
ffffffff81203c20
s1 :
ffffffff81203e28 a0 :
ffffffff81203d22 a1 :
0000000000000000
a2 :
ffffffff81203d08 a3 :
0000000081203d21 a4 :
ffffffffffffffff
a5 :
00000000401c31ac a6 :
ffff0a00ffffff04 a7 :
ffffffffffffffff
s2 :
ffffffff81203d08 s3 :
ffffffff81203d00 s4 :
0000000000000008
s5 :
ffffffff000000ff s6 :
0000000000ffffff s7 :
00000000ffffff00
s8 :
ffffffff80d9821a s9 :
ffffffff81203d22 s10:
0000000000000002
s11:
ffffffff80d9821c t3 :
ffffffff812f3617 t4 :
ffffffff812f3617
t5 :
ffffffff812f3618 t6 :
ffffffff81203d08
status:
0000000200000100 badaddr:
00000000401c31ac cause:
000000000000000d
[<
ffffffff80338936>] vsnprintf+0x1e4/0x336
[<
ffffffff80055ae2>] vprintk_store+0xf6/0x344
[<
ffffffff80055d86>] vprintk_emit+0x56/0x192
[<
ffffffff80055ed8>] vprintk_default+0x16/0x1e
[<
ffffffff800563d2>] vprintk+0x72/0x80
[<
ffffffff806813b2>] _printk+0x36/0x50
[<
ffffffff8068af48>] print_reserved_mem+0x1c/0x24
[<
ffffffff808057ec>] paging_init+0x528/0x5bc
[<
ffffffff808031ae>] setup_arch+0xd0/0x592
[<
ffffffff8080070e>] start_kernel+0x82/0x73c
early_init_fdt_scan_reserved_mem() takes no arguments as it operates on
initial_boot_params, which is populated by early_init_dt_verify(). On
RISC-V, early_init_dt_verify() is called twice. Once, directly, in
setup_arch() if CONFIG_BUILTIN_DTB is not enabled and once indirectly,
very early in the boot process, by parse_dtb() when it calls
early_init_dt_scan_nodes().
This first call uses dtb_early_va to set initial_boot_params, which is
not usable later in the boot process when
early_init_fdt_scan_reserved_mem() is called. On arm64 for example, the
corresponding call to early_init_dt_scan_nodes() uses fixmap addresses
and doesn't suffer the same fate.
Move early_init_fdt_scan_reserved_mem() further along the boot sequence,
after the direct call to early_init_dt_verify() in setup_arch() so that
the names use the correct virtual memory addresses. The above supposed
that CONFIG_BUILTIN_DTB was not set, but should work equally in the case
where it is - unflatted_and_copy_device_tree() also updates
initial_boot_params.
Reported-by: Valentina Fernandez <valentina.fernandezalanis@microchip.com>
Reported-by: Evgenii Shatokhin <e.shatokhin@yadro.com>
Link: https://lore.kernel.org/linux-riscv/f8e67f82-103d-156c-deb0-d6d6e2756f5e@microchip.com/
Fixes:
922b0375fc93 ("riscv: Fix memblock reservation for device tree blob")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Evgenii Shatokhin <e.shatokhin@yadro.com>
Link: https://lore.kernel.org/r/20221107151524.3941467-1-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>