rockchip: Add Engicam PX30.Core C.TOUCH 2.0

PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.

C.TOUCH 2.0 is a general purpose carrier board with capacitive
touch interface support.

PX30.Core needs to mount on top of this Carrier board for creating
complete PX30.Core C.TOUCH 2.0 board.

Add support for it.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index aa5dba9..dafe948 100644 (file)
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -72,6 +72,7 @@ dtb-$(CONFIG_MACH_S700) += \
 dtb-$(CONFIG_ROCKCHIP_PX30) += \
        px30-evb.dtb \
        px30-firefly.dtb \
+       px30-px30-core-ctouch2.dtb \
        px30-px30-core-edimm2.2.dtb \
        rk3326-odroid-go2.dtb
 

diff --git a/arch/arm/dts/px30-px30-core-ctouch2.dts b/arch/arm/dts/px30-px30-core-ctouch2.dts
new file mode 100644 (file)
index 0000000..2da0128
--- /dev/null
+++ b/arch/arm/dts/px30-px30-core-ctouch2.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "px30.dtsi"
+#include "px30-engicam-ctouch2.dtsi"
+#include "px30-px30-core.dtsi"
+
+/ {
+       model = "Engicam PX30.Core C.TOUCH 2.0";
+       compatible = "engicam,px30-core-ctouch2", "engicam,px30-px30-core",
+                    "rockchip,px30";
+
+       chosen {
+               stdout-path = "serial2:115200n8";
+       };
+};

diff --git a/arch/arm/mach-rockchip/px30/Kconfig b/arch/arm/mach-rockchip/px30/Kconfig
index 5d014f6..16090f5 100644 (file)
--- a/arch/arm/mach-rockchip/px30/Kconfig
+++ b/arch/arm/mach-rockchip/px30/Kconfig
@@ -20,6 +20,13 @@ config TARGET_PX30_CORE
          * PX30.Core needs to mount on top of EDIMM2.2 for creating complete
            PX30.Core EDIMM2.2 Starter Kit.
 
+         PX30.Core CTOUCH2:
+         * PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
+         * CTOUCH2.0 is a general purpose Carrier board with capacitive
+           touch interface support.
+         * PX30.Core needs to mount on top of CTOUCH2.0 for creating complete
+           PX30.Core C.TOUCH Carrier board.
+
 config ROCKCHIP_BOOT_MODE_REG
        default 0xff010200
 

diff --git a/board/engicam/px30_core/MAINTAINERS b/board/engicam/px30_core/MAINTAINERS
index f98a844..b87ca22 100644 (file)
--- a/board/engicam/px30_core/MAINTAINERS
+++ b/board/engicam/px30_core/MAINTAINERS
@@ -1,3 +1,9 @@
+PX30-Core-CTOUCH2.0
+M:     Jagan Teki <jagan@amarulasolutions.com>
+M:     Suniel Mahesh <sunil@amarulasolutions.com>
+S:     Maintained
+F:     configs/px30-core-ctouch2-px30_defconfig
+
 PX30-Core-EDIMM2.2
 M:     Jagan Teki <jagan@amarulasolutions.com>
 M:     Suniel Mahesh <sunil@amarulasolutions.com>

diff --git a/configs/px30-core-ctouch2-px30_defconfig b/configs/px30-core-ctouch2-px30_defconfig
new file mode 100644 (file)
index 0000000..d64f05d
--- /dev/null
+++ b/configs/px30-core-ctouch2-px30_defconfig
@@ -0,0 +1,108 @@
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_SPL_TEXT_BASE=0x00000000
+CONFIG_ROCKCHIP_PX30=y
+CONFIG_TARGET_PX30_CORE=y
+CONFIG_DEBUG_UART_CHANNEL=1
+CONFIG_TPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL_STACK_R_ADDR=0x600000
+CONFIG_DEBUG_UART_BASE=0xFF160000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_DEFAULT_DEVICE_TREE="px30-px30-core-ctouch2"
+CONFIG_DEBUG_UART=y
+CONFIG_TPL_SYS_MALLOC_F_LEN=0x600
+# CONFIG_ANDROID_BOOT_IMAGE is not set
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_LOAD_FIT=y
+# CONFIG_CONSOLE_MUX is not set
+CONFIG_DEFAULT_FDT_FILE="rockchip/px30-px30-core-ctouch2.dtb"
+CONFIG_MISC_INIT_R=y
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_BOOTROM_SUPPORT=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_STACK_R=y
+# CONFIG_TPL_BANNER_PRINT is not set
+CONFIG_SPL_CRC32_SUPPORT=y
+CONFIG_SPL_ATF=y
+# CONFIG_TPL_FRAMEWORK is not set
+# CONFIG_CMD_BOOTD is not set
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_LZMADEC is not set
+# CONFIG_CMD_UNZIP is not set
+CONFIG_CMD_GPT=y
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_CMD_ITEST is not set
+# CONFIG_CMD_SETEXPR is not set
+# CONFIG_CMD_MISC is not set
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_ISO_PARTITION is not set
+CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=64
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_LIVE=y
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_REGMAP=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_SPL_SYSCON=y
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_FASTBOOT_BUF_ADDR=0x800800
+CONFIG_FASTBOOT_BUF_SIZE=0x04000000
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MISC=y
+CONFIG_ROCKCHIP_OTP=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PINCTRL=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_RAM=y
+CONFIG_SPL_RAM=y
+CONFIG_TPL_RAM=y
+CONFIG_ROCKCHIP_SDRAM_COMMON=y
+CONFIG_DM_RESET=y
+CONFIG_DM_RNG=y
+CONFIG_RNG_ROCKCHIP=y
+# CONFIG_SPECIFY_CONSOLE_INDEX is not set
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_DEBUG_UART_SKIP_INIT=y
+CONFIG_SOUND=y
+CONFIG_SYSRESET=y
+CONFIG_DM_THERMAL=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_DM_VIDEO=y
+CONFIG_DISPLAY=y
+CONFIG_LCD=y
+CONFIG_SPL_TINY_MEMSET=y
+CONFIG_TPL_TINY_MEMSET=y
+CONFIG_LZO=y
+CONFIG_ERRNO_STR=y