Change example launcher to use unsigned long not u32

Apply Clue 2x4 to lguest userland<->kernel handling code and the
lguest launcher. Pointers are not to be passed in u32's!

Basic rule of thumb: Anything passing u32's back and forth should be
passing unsigned longs to be portable to 64 bit archs.

For those who forgotten already, I repeat: NO POINTERS IN u32!

Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c
index 140bd98..4950b03 100644 (file)
--- a/Documentation/lguest/lguest.c
+++ b/Documentation/lguest/lguest.c
@@ -473,9 +473,9 @@ static unsigned long setup_pagetables(unsigned long mem,
                                      unsigned long initrd_size,
                                      unsigned long page_offset)
 {
-       u32 *pgdir, *linear;
+       unsigned long *pgdir, *linear;
        unsigned int mapped_pages, i, linear_pages;
-       unsigned int ptes_per_page = getpagesize()/sizeof(u32);
+       unsigned int ptes_per_page = getpagesize()/sizeof(void *);
 
        /* Ideally we map all physical memory starting at page_offset.
         * However, if page_offset is 0xC0000000 we can only map 1G of physical
@@ -505,7 +505,7 @@ static unsigned long setup_pagetables(unsigned long mem,
         * continue from there. */
        for (i = 0; i < mapped_pages; i += ptes_per_page) {
                pgdir[(i + page_offset/getpagesize())/ptes_per_page]
-                       = ((to_guest_phys(linear) + i*sizeof(u32))
+                       = ((to_guest_phys(linear) + i*sizeof(void *))
                           | PAGE_PRESENT);
        }
 
@@ -537,12 +537,13 @@ static void concat(char *dst, char *args[])
  * the base of guest "physical" memory, the top physical page to allow, the
  * top level pagetable, the entry point and the page_offset constant for the
  * Guest. */
-static int tell_kernel(u32 pgdir, u32 start, u32 page_offset)
+static int tell_kernel(unsigned long pgdir, unsigned long start,
+                      unsigned long page_offset)
 {
-       u32 args[] = { LHREQ_INITIALIZE,
-                      (unsigned long)guest_base,
-                      guest_limit / getpagesize(),
-                      pgdir, start, page_offset };
+       unsigned long args[] = { LHREQ_INITIALIZE,
+                                (unsigned long)guest_base,
+                                guest_limit / getpagesize(),
+                                pgdir, start, page_offset };
        int fd;
 
        verbose("Guest: %p - %p (%#lx)\n",
@@ -586,7 +587,7 @@ static void wake_parent(int pipefd, int lguest_fd, struct device_list *devices)
 
        for (;;) {
                fd_set rfds = devices->infds;
-               u32 args[] = { LHREQ_BREAK, 1 };
+               unsigned long args[] = { LHREQ_BREAK, 1 };
 
                /* Wait until input is ready from one of the devices. */
                select(devices->max_infd+1, &rfds, NULL, NULL, NULL);
@@ -684,7 +685,7 @@ static u32 *dma2iov(unsigned long dma, struct iovec iov[], unsigned *num)
 static u32 *get_dma_buffer(int fd, void *key,
                           struct iovec iov[], unsigned int *num, u32 *irq)
 {
-       u32 buf[] = { LHREQ_GETDMA, to_guest_phys(key) };
+       unsigned long buf[] = { LHREQ_GETDMA, to_guest_phys(key) };
        unsigned long udma;
        u32 *res;
 
@@ -705,7 +706,7 @@ static u32 *get_dma_buffer(int fd, void *key,
 /* This is a convenient routine to send the Guest an interrupt. */
 static void trigger_irq(int fd, u32 irq)
 {
-       u32 buf[] = { LHREQ_IRQ, irq };
+       unsigned long buf[] = { LHREQ_IRQ, irq };
        if (write(fd, buf, sizeof(buf)) != 0)
                err(1, "Triggering irq %i", irq);
 }
@@ -787,7 +788,7 @@ static bool handle_console_input(int fd, struct device *dev)
                        struct timeval now;
                        gettimeofday(&now, NULL);
                        if (now.tv_sec <= abort->start.tv_sec+1) {
-                               u32 args[] = { LHREQ_BREAK, 0 };
+                               unsigned long args[] = { LHREQ_BREAK, 0 };
                                /* Close the fd so Waker will know it has to
                                 * exit. */
                                close(waker_fd);
@@ -1365,7 +1366,7 @@ static void __attribute__((noreturn))
 run_guest(int lguest_fd, struct device_list *device_list)
 {
        for (;;) {
-               u32 args[] = { LHREQ_BREAK, 0 };
+               unsigned long args[] = { LHREQ_BREAK, 0 };
                unsigned long arr[2];
                int readval;
 

diff --git a/drivers/lguest/lguest_user.c b/drivers/lguest/lguest_user.c
index 5632ed8..d4ac5f8 100644 (file)
--- a/drivers/lguest/lguest_user.c
+++ b/drivers/lguest/lguest_user.c
@@ -43,7 +43,7 @@ static void setup_regs(struct lguest_regs *regs, unsigned long start)
 /*L:310 To send DMA into the Guest, the Launcher needs to be able to ask for a
  * DMA buffer.  This is done by writing LHREQ_GETDMA and the key to
  * /dev/lguest. */
-static long user_get_dma(struct lguest *lg, const u32 __user *input)
+static long user_get_dma(struct lguest *lg, const unsigned long __user *input)
 {
        unsigned long key, udma, irq;
 
@@ -67,7 +67,7 @@ static long user_get_dma(struct lguest *lg, const u32 __user *input)
 /*L:315 To force the Guest to stop running and return to the Launcher, the
  * Waker sets writes LHREQ_BREAK and the value "1" to /dev/lguest.  The
  * Launcher then writes LHREQ_BREAK and "0" to release the Waker. */
-static int break_guest_out(struct lguest *lg, const u32 __user *input)
+static int break_guest_out(struct lguest *lg, const unsigned long __user *input)
 {
        unsigned long on;
 
@@ -90,9 +90,9 @@ static int break_guest_out(struct lguest *lg, const u32 __user *input)
 
 /*L:050 Sending an interrupt is done by writing LHREQ_IRQ and an interrupt
  * number to /dev/lguest. */
-static int user_send_irq(struct lguest *lg, const u32 __user *input)
+static int user_send_irq(struct lguest *lg, const unsigned long __user *input)
 {
-       u32 irq;
+       unsigned long irq;
 
        if (get_user(irq, input) != 0)
                return -EFAULT;
@@ -142,8 +142,8 @@ static ssize_t read(struct file *file, char __user *user, size_t size,loff_t*o)
        return run_guest(lg, (unsigned long __user *)user);
 }
 
-/*L:020 The initialization write supplies 5 32-bit values (in addition to the
- * 32-bit LHREQ_INITIALIZE value).  These are:
+/*L:020 The initialization write supplies 5 pointer sized (32 or 64 bit)
+ * values (in addition to the LHREQ_INITIALIZE value).  These are:
  *
  * base: The start of the Guest-physical memory inside the Launcher memory.
  *
@@ -162,13 +162,13 @@ static ssize_t read(struct file *file, char __user *user, size_t size,loff_t*o)
  * quickly converted from physical to virtual by adding PAGE_OFFSET.  It's
  * 0xC0000000 (3G) by default, but it's configurable at kernel build time.
  */
-static int initialize(struct file *file, const u32 __user *input)
+static int initialize(struct file *file, const unsigned long __user *input)
 {
        /* "struct lguest" contains everything we (the Host) know about a
         * Guest. */
        struct lguest *lg;
        int err;
-       u32 args[5];
+       unsigned long args[5];
 
        /* We grab the Big Lguest lock, which protects against multiple
         * simultaneous initializations. */
@@ -259,17 +259,18 @@ unlock:
  * start with a 32 bit number: for the first write this must be
  * LHREQ_INITIALIZE to set up the Guest.  After that the Launcher can use
  * writes of other values to get DMA buffers and send interrupts. */
-static ssize_t write(struct file *file, const char __user *input,
+static ssize_t write(struct file *file, const char __user *in,
                     size_t size, loff_t *off)
 {
        /* Once the guest is initialized, we hold the "struct lguest" in the
         * file private data. */
        struct lguest *lg = file->private_data;
-       u32 req;
+       const unsigned long __user *input = (const unsigned long __user *)in;
+       unsigned long req;
 
        if (get_user(req, input) != 0)
                return -EFAULT;
-       input += sizeof(req);
+       input++;
 
        /* If you haven't initialized, you must do that first. */
        if (req != LHREQ_INITIALIZE && !lg)
@@ -285,13 +286,13 @@ static ssize_t write(struct file *file, const char __user *input,
 
        switch (req) {
        case LHREQ_INITIALIZE:
-               return initialize(file, (const u32 __user *)input);
+               return initialize(file, input);
        case LHREQ_GETDMA:
-               return user_get_dma(lg, (const u32 __user *)input);
+               return user_get_dma(lg, input);
        case LHREQ_IRQ:
-               return user_send_irq(lg, (const u32 __user *)input);
+               return user_send_irq(lg, input);
        case LHREQ_BREAK:
-               return break_guest_out(lg, (const u32 __user *)input);
+               return break_guest_out(lg, input);
        default:
                return -EINVAL;
        }