* INSTALL, lib/INSTALL, lib/texinfo.tex, lib/config.sub: New

upstream versions.

diff --git a/ChangeLog b/ChangeLog
index 145fe90d17e1e67930ec3869264abde04d3dd7b1..fd172e895d632a2dab526d1acdb79be4dc0cfc69 100644 (file)
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,5 +1,8 @@
 2006-08-20  Alexandre Duret-Lutz  <adl@gnu.org>
 
+       * INSTALL, lib/INSTALL, lib/texinfo.tex, lib/config.sub: New
+       upstream versions.
+
        * m4/mkdirp.m4 (AM_PROG_MKDIR_P): Prefix mkdir_p with
        $(top_builddir)/ if it is a relative directory.
 

diff --git a/INSTALL b/INSTALL
index 5f5529c0fdcff5952afe8e925fd8015cb86a4cec..5458714e1e2cb289572992ad92eceffc848f64d6 100644 (file)
--- a/INSTALL
+++ b/INSTALL
@@ -10,7 +10,10 @@ unlimited permission to copy, distribute and modify it.
 Basic Installation
 ==================
 
-These are generic installation instructions.
+Briefly, the shell commands `./configure; make; make install' should
+configure, build, and install this package.  The following
+more-detailed instructions are generic; see the `README' file for
+instructions specific to this package.
 
    The `configure' shell script attempts to guess correct values for
 various system-dependent variables used during compilation.  It uses
@@ -23,9 +26,9 @@ debugging `configure').
 
    It can also use an optional file (typically called `config.cache'
 and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring.  (Caching is
+the results of its tests to speed up reconfiguring.  Caching is
 disabled by default to prevent problems with accidental use of stale
-cache files.)
+cache files.
 
    If you need to do unusual things to compile the package, please try
 to figure out how `configure' could check whether to do them, and mail
@@ -35,20 +38,17 @@ some point `config.cache' contains results you don't want to keep, you
 may remove or edit it.
 
    The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'.  You only need
-`configure.ac' if you want to change it or regenerate `configure' using
-a newer version of `autoconf'.
+`configure' by a program called `autoconf'.  You need `configure.ac' if
+you want to change it or regenerate `configure' using a newer version
+of `autoconf'.
 
 The simplest way to compile this package is:
 
   1. `cd' to the directory containing the package's source code and type
-     `./configure' to configure the package for your system.  If you're
-     using `csh' on an old version of System V, you might need to type
-     `sh ./configure' instead to prevent `csh' from trying to execute
-     `configure' itself.
+     `./configure' to configure the package for your system.
 
-     Running `configure' takes awhile.  While running, it prints some
-     messages telling which features it is checking for.
+     Running `configure' might take a while.  While running, it prints
+     some messages telling which features it is checking for.
 
   2. Type `make' to compile the package.
 
@@ -78,7 +78,7 @@ details on some of the pertinent environment variables.
 by setting variables in the command line or in the environment.  Here
 is an example:
 
-     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+     ./configure CC=c99 CFLAGS=-g LIBS=-lposix
 
    *Note Defining Variables::, for more details.
 
@@ -87,17 +87,15 @@ Compiling For Multiple Architectures
 
 You can compile the package for more than one kind of computer at the
 same time, by placing the object files for each architecture in their
-own directory.  To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'.  `cd' to the
+own directory.  To do this, you can use GNU `make'.  `cd' to the
 directory where you want the object files and executables to go and run
 the `configure' script.  `configure' automatically checks for the
 source code in the directory that `configure' is in and in `..'.
 
-   If you have to use a `make' that does not support the `VPATH'
-variable, you have to compile the package for one architecture at a
-time in the source code directory.  After you have installed the
-package for one architecture, use `make distclean' before reconfiguring
-for another architecture.
+   With a non-GNU `make', it is safer to compile the package for one
+architecture at a time in the source code directory.  After you have
+installed the package for one architecture, use `make distclean' before
+reconfiguring for another architecture.
 
 Installation Names
 ==================

diff --git a/lib/INSTALL b/lib/INSTALL
index 5f5529c0fdcff5952afe8e925fd8015cb86a4cec..5458714e1e2cb289572992ad92eceffc848f64d6 100644 (file)
--- a/lib/INSTALL
+++ b/lib/INSTALL
@@ -10,7 +10,10 @@ unlimited permission to copy, distribute and modify it.
 Basic Installation
 ==================
 
-These are generic installation instructions.
+Briefly, the shell commands `./configure; make; make install' should
+configure, build, and install this package.  The following
+more-detailed instructions are generic; see the `README' file for
+instructions specific to this package.
 
    The `configure' shell script attempts to guess correct values for
 various system-dependent variables used during compilation.  It uses
@@ -23,9 +26,9 @@ debugging `configure').
 
    It can also use an optional file (typically called `config.cache'
 and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring.  (Caching is
+the results of its tests to speed up reconfiguring.  Caching is
 disabled by default to prevent problems with accidental use of stale
-cache files.)
+cache files.
 
    If you need to do unusual things to compile the package, please try
 to figure out how `configure' could check whether to do them, and mail
@@ -35,20 +38,17 @@ some point `config.cache' contains results you don't want to keep, you
 may remove or edit it.
 
    The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'.  You only need
-`configure.ac' if you want to change it or regenerate `configure' using
-a newer version of `autoconf'.
+`configure' by a program called `autoconf'.  You need `configure.ac' if
+you want to change it or regenerate `configure' using a newer version
+of `autoconf'.
 
 The simplest way to compile this package is:
 
   1. `cd' to the directory containing the package's source code and type
-     `./configure' to configure the package for your system.  If you're
-     using `csh' on an old version of System V, you might need to type
-     `sh ./configure' instead to prevent `csh' from trying to execute
-     `configure' itself.
+     `./configure' to configure the package for your system.
 
-     Running `configure' takes awhile.  While running, it prints some
-     messages telling which features it is checking for.
+     Running `configure' might take a while.  While running, it prints
+     some messages telling which features it is checking for.
 
   2. Type `make' to compile the package.
 
@@ -78,7 +78,7 @@ details on some of the pertinent environment variables.
 by setting variables in the command line or in the environment.  Here
 is an example:
 
-     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+     ./configure CC=c99 CFLAGS=-g LIBS=-lposix
 
    *Note Defining Variables::, for more details.
 
@@ -87,17 +87,15 @@ Compiling For Multiple Architectures
 
 You can compile the package for more than one kind of computer at the
 same time, by placing the object files for each architecture in their
-own directory.  To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'.  `cd' to the
+own directory.  To do this, you can use GNU `make'.  `cd' to the
 directory where you want the object files and executables to go and run
 the `configure' script.  `configure' automatically checks for the
 source code in the directory that `configure' is in and in `..'.
 
-   If you have to use a `make' that does not support the `VPATH'
-variable, you have to compile the package for one architecture at a
-time in the source code directory.  After you have installed the
-package for one architecture, use `make distclean' before reconfiguring
-for another architecture.
+   With a non-GNU `make', it is safer to compile the package for one
+architecture at a time in the source code directory.  After you have
+installed the package for one architecture, use `make distclean' before
+reconfiguring for another architecture.
 
 Installation Names
 ==================

diff --git a/lib/config.guess b/lib/config.guess
index c085f4f51a2fe95e532cf168bc5e93f04ac5fdda..396482d6cb50b24a598700992f65d340165591d6 100755 (executable)
--- a/lib/config.guess
+++ b/lib/config.guess
@@ -4,7 +4,7 @@
 #   2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation,
 #   Inc.
 
-timestamp='2006-05-13'
+timestamp='2006-07-02'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -211,7 +211,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
        echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
        exit ;;
     macppc:MirBSD:*:*)
-       echo powerppc-unknown-mirbsd${UNAME_RELEASE}
+       echo powerpc-unknown-mirbsd${UNAME_RELEASE}
        exit ;;
     *:MirBSD:*:*)
        echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
@@ -790,10 +790,10 @@ EOF
     i*:PW*:*)
        echo ${UNAME_MACHINE}-pc-pw32
        exit ;;
-    x86:Interix*:[345]*)
+    x86:Interix*:[3456]*)
        echo i586-pc-interix${UNAME_RELEASE}
        exit ;;
-    EM64T:Interix*:[345]*)
+    EM64T:Interix*:[3456]*)
        echo x86_64-unknown-interix${UNAME_RELEASE}
        exit ;;
     [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
@@ -831,6 +831,9 @@ EOF
     arm*:Linux:*:*)
        echo ${UNAME_MACHINE}-unknown-linux-gnu
        exit ;;
+    avr32*:Linux:*:*)
+       echo ${UNAME_MACHINE}-unknown-linux-gnu
+       exit ;;
     cris:Linux:*:*)
        echo cris-axis-linux-gnu
        exit ;;

diff --git a/lib/config.sub b/lib/config.sub
index 4d936e2394287d298aa1764d3f8760ca000c6edb..53954dbe90a9beaeccc055275f0d45a425e55d11 100644 (file)
--- a/lib/config.sub
+++ b/lib/config.sub
@@ -4,7 +4,7 @@
 #   2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation,
 #   Inc.
 
-timestamp='2006-05-13'
+timestamp='2006-08-14'
 
 # This file is (in principle) common to ALL GNU software.
 # The presence of a machine in this file suggests that SOME GNU software
@@ -241,7 +241,7 @@ case $basic_machine in
        | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
        | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
        | am33_2.0 \
-       | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
+       | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
        | bfin \
        | c4x | clipper \
        | d10v | d30v | dlx | dsp16xx \
@@ -284,7 +284,7 @@ case $basic_machine in
        | tahoe | thumb | tic4x | tic80 | tron \
        | v850 | v850e \
        | we32k \
-       | x86 | xscale | xscalee[bl] | xstormy16 | xtensa \
+       | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
        | z8k)
                basic_machine=$basic_machine-unknown
                ;;
@@ -317,7 +317,7 @@ case $basic_machine in
        | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
        | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
        | arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
-       | avr-* \
+       | avr-* | avr32-* \
        | bfin-* | bs2000-* \
        | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
        | clipper-* | craynv-* | cydra-* \
@@ -367,7 +367,7 @@ case $basic_machine in
        | tron-* \
        | v850-* | v850e-* | vax-* \
        | we32k-* \
-       | x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \
+       | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
        | xstormy16-* | xtensa-* \
        | ymp-* \
        | z8k-*)
@@ -909,6 +909,10 @@ case $basic_machine in
        sb1el)
                basic_machine=mipsisa64sb1el-unknown
                ;;
+       sde)
+               basic_machine=mipsisa32-sde
+               os=-elf
+               ;;
        sei)
                basic_machine=mips-sei
                os=-seiux
@@ -1214,7 +1218,7 @@ case $os in
              | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
              | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
              | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
-             | -skyos* | -haiku* | -rdos*)
+             | -skyos* | -haiku* | -rdos* | -toppers*)
        # Remember, each alternative MUST END IN *, to match a version number.
                ;;
        -qnx*)

diff --git a/lib/texinfo.tex b/lib/texinfo.tex
index fcddd268999ab8a81de591dfbdc592b3353ed87f..36c1acad97cdd4096b002daf82188f5becb8c419 100644 (file)
--- a/lib/texinfo.tex
+++ b/lib/texinfo.tex
@@ -3,7 +3,7 @@
 % Load plain if necessary, i.e., if running under initex.
 \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
 %
-\def\texinfoversion{2006-05-07.15}
+\def\texinfoversion{2006-07-17.16}
 %
 % Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
 % 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free
@@ -327,9 +327,9 @@
       \pagebody{#1}%
       \ifdim\ht\footlinebox > 0pt
         % Only leave this space if the footline is nonempty.
-        % (We lessened \vsize for it in \oddfootingxxx.)
+        % (We lessened \vsize for it in \oddfootingyyy.)
         % The \baselineskip=24pt in plain's \makefootline has no effect.
-        \vskip 2\baselineskip
+        \vskip 24pt
         \unvbox\footlinebox
       \fi
       %
@@ -1084,15 +1084,24 @@ where each line of input produces a line of output.}
 \def\minus{$-$}
 
 % @dots{} outputs an ellipsis using the current font.
-% We do .5em per period so that it has the same spacing in a typewriter
-% font as three actual period characters.
+% We do .5em per period so that it has the same spacing in the cm
+% typewriter fonts as three actual period characters; on the other hand,
+% in other typewriter fonts three periods are wider than 1.5em.  So do
+% whichever is larger.
 %
 \def\dots{%
   \leavevmode
-  \hbox to 1.5em{%
-    \hskip 0pt plus 0.25fil
-    .\hfil.\hfil.%
-    \hskip 0pt plus 0.5fil
+  \setbox0=\hbox{...}% get width of three periods
+  \ifdim\wd0 > 1.5em
+    \dimen0 = \wd0
+  \else
+    \dimen0 = 1.5em
+  \fi
+  \hbox to \dimen0{%
+    \hskip 0pt plus.25fil
+    .\hskip 0pt plus1fil
+    .\hskip 0pt plus1fil
+    .\hskip 0pt plus.5fil
   }%
 }
 
@@ -2042,11 +2051,11 @@ where each line of input produces a line of output.}
 % and arrange explicitly to hyphenate at a dash.
 %  -- rms.
 {
-  \catcode`\-=\active
-  \catcode`\_=\active
+  \catcode`\-=\active \catcode`\_=\active \catcode`\'=\active
   %
   \global\def\code{\begingroup
-    \catcode`\-=\active  \catcode`\_=\active
+    \catcode`\-=\active  \catcode`\_=\active \catcode`\'=\active
+    \let'\singlequotechar
     \ifallowcodebreaks
      \let-\codedash
      \let_\codeunder
@@ -2463,8 +2472,8 @@ where each line of input produces a line of output.}
   %
   % Leave some space for the footline.  Hopefully ok to assume
   % @evenfooting will not be used by itself.
-  \global\advance\pageheight by -\baselineskip
-  \global\advance\vsize by -\baselineskip
+  \global\advance\pageheight by -12pt
+  \global\advance\vsize by -12pt
 }
 
 \parseargdef\everyfooting{\oddfootingxxx{#1}\evenfootingxxx{#1}}
@@ -3391,12 +3400,39 @@ where each line of input produces a line of output.}
   \escapechar = `\\     % use backslash in output files.
   \def\@{@}% change to @@ when we switch to @ as escape char in index files.
   \def\ {\realbackslash\space }%
+  %
   % Need these in case \tex is in effect and \{ is a \delimiter again.
   % But can't use \lbracecmd and \rbracecmd because texindex assumes
   % braces and backslashes are used only as delimiters.
   \let\{ = \mylbrace
   \let\} = \myrbrace
   %
+  % I don't entirely understand this, but when an index entry is
+  % generated from a macro call, the \endinput which \scanmacro inserts
+  % causes processing to be prematurely terminated.  This is,
+  % apparently, because \indexsorttmp is fully expanded, and \endinput
+  % is an expandable command.  The redefinition below makes \endinput
+  % disappear altogether for that purpose -- although logging shows that
+  % processing continues to some further point.  On the other hand, it
+  % seems \endinput does not hurt in the printed index arg, since that
+  % is still getting written without apparent harm.
+  % 
+  % Sample source (mac-idx3.tex, reported by Graham Percival to
+  % help-texinfo, 22may06):
+  % @macro funindex {WORD}
+  % @findex xyz
+  % @end macro
+  % ...
+  % @funindex commtest
+  % 
+  % The above is not enough to reproduce the bug, but it gives the flavor.
+  % 
+  % Sample whatsit resulting:
+  % .@write3{\entry{xyz}{@folio }{@code {xyz@endinput }}}
+  % 
+  % So:
+  \let\endinput = \empty
+  %
   % Do the redefinitions.
   \commondummies
 }
@@ -3969,9 +4005,9 @@ where each line of input produces a line of output.}
   \endgroup
 }
 
-% Like \dotfill except takes at least 1 em.
+% Like plain.tex's \dotfill, except uses up at least 1 em.
 \def\indexdotfill{\cleaders
-  \hbox{$\mathsurround=0pt \mkern1.5mu ${\it .}$ \mkern1.5mu$}\hskip 1em plus 1fill}
+  \hbox{$\mathsurround=0pt \mkern1.5mu.\mkern1.5mu$}\hskip 1em plus 1fill}
 
 \def\primary #1{\line{#1\hfil}}
 
@@ -4545,14 +4581,17 @@ where each line of input produces a line of output.}
     \ifx\temptype\Ynothingkeyword
       \setbox0 = \hbox{}%
       \def\toctype{unnchap}%
+      \gdef\thischapternum{}%
       \gdef\thischapter{#1}%
     \else\ifx\temptype\Yomitfromtockeyword
       \setbox0 = \hbox{}% contents like unnumbered, but no toc entry
       \def\toctype{omit}%
+      \gdef\thischapternum{}%
       \gdef\thischapter{}%
     \else\ifx\temptype\Yappendixkeyword
       \setbox0 = \hbox{\putwordAppendix{} #3\enspace}%
       \def\toctype{app}%
+      \xdef\thischapternum{\appendixletter}%
       % We don't substitute the actual chapter name into \thischapter
       % because we don't want its macros evaluated now.  And we don't
       % use \thissection because that changes with each section.
@@ -4562,6 +4601,7 @@ where each line of input produces a line of output.}
     \else
       \setbox0 = \hbox{#3\enspace}%
       \def\toctype{numchap}%
+      \xdef\thischapternum{\the\chapno}%
       \xdef\thischapter{\putwordChapter{} \the\chapno:
                         \noexpand\thischaptername}%
     \fi\fi\fi
@@ -5002,7 +5042,7 @@ where each line of input produces a line of output.}
 {\tentt \global\dimen0 = 3em}% Width of the box.
 \dimen2 = .55pt % Thickness of rules
 % The text. (`r' is open on the right, `e' somewhat less so on the left.)
-\setbox0 = \hbox{\kern-.75pt \tensf error\kern-1.5pt}
+\setbox0 = \hbox{\kern-.75pt \reducedsf error\kern-1.5pt}
 %
 \setbox\errorbox=\hbox to \dimen0{\hfil
    \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right.
@@ -5225,11 +5265,10 @@ where each line of input produces a line of output.}
 %
 \maketwodispenvs {lisp}{example}{%
   \nonfillstart
-  \tt
+  \tt\quoteexpand
   \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special.
   \gobble       % eat return
 }
-
 % @display/@smalldisplay: same as @lisp except keep current font.
 %
 \makedispenv {display}{%
@@ -5357,6 +5396,22 @@ where each line of input produces a line of output.}
 \newdimen\tabw \setbox0=\hbox{\tt\space} \tabw=8\wd0 % tab amount
 %
 \def\starttabbox{\setbox0=\hbox\bgroup}
+
+% Allow an option to not replace quotes with a regular directed right
+% quote/apostrophe (char 0x27), but instead use the undirected quote
+% from cmtt (char 0x0d).  The undirected quote is ugly, so don't make it
+% the default, but it works for pasting with more pdf viewers (at least
+% evince), the lilypond developers report.  xpdf does work with the
+% regular 0x27.  
+% 
+\def\singlequotechar{%
+  \expandafter\ifx\csname SETcodequoteundirected\endcsname\relax
+    '%
+  \else
+    \char'15
+  \fi
+}
+%
 \begingroup
   \catcode`\^^I=\active
   \gdef\tabexpand{%
@@ -5369,7 +5424,13 @@ where each line of input produces a line of output.}
       \wd0=\dimen0 \box0 \starttabbox
     }%
   }
+  \catcode`\'=\active
+  \gdef\quoteexpand{%
+    \catcode`\'=\active
+    \def'{\singlequotechar}
+  }%
 \endgroup
+%
 \def\setupverbatim{%
   \let\nonarrowing = t%
   \nonfillstart
@@ -5378,6 +5439,7 @@ where each line of input produces a line of output.}
   \def\par{\leavevmode\egroup\box0\endgraf}%
   \catcode`\`=\active
   \tabexpand
+  \quoteexpand
   % Respect line breaks,
   % print special symbols as themselves, and
   % make each space count
@@ -5827,7 +5889,6 @@ where each line of input produces a line of output.}
     \spaceisspace
     %
     % Append \endinput to make sure that TeX does not see the ending newline.
-    %
     % I've verified that it is necessary both for e-TeX and for ordinary TeX
     %                                                  --kasal, 29nov03
     \scantokens{#1\endinput}%