*/
#if CHIP_HAS_AUX_PERF_COUNTERS()
#define LINUX_MASKABLE_INTERRUPTS_HI \
- (~(INT_MASK_HI(INT_PERF_COUNT) | INT_MASK_HI(INT_AUX_PERF_COUNT)))
+ (~(INT_MASK_HI(INT_PERF_COUNT) | INT_MASK_HI(INT_AUX_PERF_COUNT)))
#else
#define LINUX_MASKABLE_INTERRUPTS_HI \
- (~(INT_MASK_HI(INT_PERF_COUNT)))
+ (~(INT_MASK_HI(INT_PERF_COUNT)))
#endif
#else
__insn_mtspr(SPR_INTERRUPT_MASK_RESET_K_0, (unsigned long)(__m)); \
__insn_mtspr(SPR_INTERRUPT_MASK_RESET_K_1, (unsigned long)(__m>>32)); \
} while (0)
+#define interrupt_mask_save_mask() \
+ (__insn_mfspr(SPR_INTERRUPT_MASK_SET_K_0) | \
+ (((unsigned long long)__insn_mfspr(SPR_INTERRUPT_MASK_SET_K_1))<<32))
+#define interrupt_mask_restore_mask(mask) do { \
+ unsigned long long __m = (mask); \
+ __insn_mtspr(SPR_INTERRUPT_MASK_K_0, (unsigned long)(__m)); \
+ __insn_mtspr(SPR_INTERRUPT_MASK_K_1, (unsigned long)(__m>>32)); \
+} while (0)
#else
#define interrupt_mask_set(n) \
__insn_mtspr(SPR_INTERRUPT_MASK_SET_K, (1UL << (n)))
__insn_mtspr(SPR_INTERRUPT_MASK_SET_K, (mask))
#define interrupt_mask_reset_mask(mask) \
__insn_mtspr(SPR_INTERRUPT_MASK_RESET_K, (mask))
+#define interrupt_mask_save_mask() \
+ __insn_mfspr(SPR_INTERRUPT_MASK_K)
+#define interrupt_mask_restore_mask(mask) \
+ __insn_mtspr(SPR_INTERRUPT_MASK_K, (mask))
#endif
/*
/* Disable all interrupts, including NMIs. */
#define arch_local_irq_disable_all() \
- interrupt_mask_set_mask(-1UL)
+ interrupt_mask_set_mask(-1ULL)
/* Re-enable all maskable interrupts. */
#define arch_local_irq_enable() \
#ifdef __tilegx__
#if INT_MEM_ERROR != 0
-# error Fix IRQ_DISABLED() macro
+# error Fix IRQS_DISABLED() macro
#endif
/* Return 0 or 1 to indicate whether interrupts are currently disabled. */
mtspr SPR_INTERRUPT_MASK_SET_K, tmp
/* Enable interrupts. */
-#define IRQ_ENABLE(tmp0, tmp1) \
+#define IRQ_ENABLE_LOAD(tmp0, tmp1) \
GET_INTERRUPTS_ENABLED_MASK_PTR(tmp0); \
- ld tmp0, tmp0; \
+ ld tmp0, tmp0
+#define IRQ_ENABLE_APPLY(tmp0, tmp1) \
mtspr SPR_INTERRUPT_MASK_RESET_K, tmp0
#else /* !__tilegx__ */
mtspr SPR_INTERRUPT_MASK_SET_K_1, tmp
/* Enable interrupts. */
-#define IRQ_ENABLE(tmp0, tmp1) \
+#define IRQ_ENABLE_LOAD(tmp0, tmp1) \
GET_INTERRUPTS_ENABLED_MASK_PTR(tmp0); \
{ \
lw tmp0, tmp0; \
addi tmp1, tmp0, 4 \
}; \
- lw tmp1, tmp1; \
+ lw tmp1, tmp1
+#define IRQ_ENABLE_APPLY(tmp0, tmp1) \
mtspr SPR_INTERRUPT_MASK_RESET_K_0, tmp0; \
mtspr SPR_INTERRUPT_MASK_RESET_K_1, tmp1
#endif
+#define IRQ_ENABLE(tmp0, tmp1) \
+ IRQ_ENABLE_LOAD(tmp0, tmp1); \
+ IRQ_ENABLE_APPLY(tmp0, tmp1)
+
/*
* Do the CPU's IRQ-state tracing from assembly code. We call a
* C function, but almost everywhere we do, we don't mind clobbering
*/
STD_ENTRY(_cpu_idle)
movei r1, 1
+ IRQ_ENABLE_LOAD(r2, r3)
mtspr INTERRUPT_CRITICAL_SECTION, r1
- IRQ_ENABLE(r2, r3) /* unmask, but still with ICS set */
+ IRQ_ENABLE_APPLY(r2, r3) /* unmask, but still with ICS set */
mtspr INTERRUPT_CRITICAL_SECTION, zero
.global _cpu_idle_nap
_cpu_idle_nap:
* This routine saves just the first four registers, plus the
* stack context so we can do proper backtracing right away,
* and defers to handle_interrupt to save the rest.
- * The backtracer needs pc, ex1, lr, sp, r52, and faultnum.
+ * The backtracer needs pc, ex1, lr, sp, r52, and faultnum,
+ * and needs sp set to its final location at the bottom of
+ * the stack frame.
*/
addli r0, r0, PTREGS_OFFSET_LR - (PTREGS_SIZE + KSTK_PTREGS_GAP)
wh64 r0 /* cache line 7 */
push_reg r5, r52
st r52, r4
- /* Load tp with our per-cpu offset. */
-#ifdef CONFIG_SMP
- {
- mfspr r20, SPR_SYSTEM_SAVE_K_0
- moveli r21, hw2_last(__per_cpu_offset)
- }
- {
- shl16insli r21, r21, hw1(__per_cpu_offset)
- bfextu r20, r20, 0, LOG2_THREAD_SIZE-1
- }
- shl16insli r21, r21, hw0(__per_cpu_offset)
- shl3add r20, r20, r21
- ld tp, r20
-#else
- move tp, zero
-#endif
-
/*
* If we will be returning to the kernel, we will need to
* reset the interrupt masks to the state they had before.
.endif
st r21, r32
+ /*
+ * we've captured enough state to the stack (including in
+ * particular our EX_CONTEXT state) that we can now release
+ * the interrupt critical section and replace it with our
+ * standard "interrupts disabled" mask value. This allows
+ * synchronous interrupts (and profile interrupts) to punch
+ * through from this point onwards.
+ *
+ * It's important that no code before this point touch memory
+ * other than our own stack (to keep the invariant that this
+ * is all that gets touched under ICS), and that no code after
+ * this point reference any interrupt-specific SPR, in particular
+ * the EX_CONTEXT_K_ values.
+ */
+ .ifc \function,handle_nmi
+ IRQ_DISABLE_ALL(r20)
+ .else
+ IRQ_DISABLE(r20, r21)
+ .endif
+ mtspr INTERRUPT_CRITICAL_SECTION, zero
+
+ /* Load tp with our per-cpu offset. */
+#ifdef CONFIG_SMP
+ {
+ mfspr r20, SPR_SYSTEM_SAVE_K_0
+ moveli r21, hw2_last(__per_cpu_offset)
+ }
+ {
+ shl16insli r21, r21, hw1(__per_cpu_offset)
+ bfextu r20, r20, 0, LOG2_THREAD_SIZE-1
+ }
+ shl16insli r21, r21, hw0(__per_cpu_offset)
+ shl3add r20, r20, r21
+ ld tp, r20
+#else
+ move tp, zero
+#endif
+
#ifdef __COLLECT_LINKER_FEEDBACK__
/*
* Notify the feedback routines that we were in the
#endif
/*
- * we've captured enough state to the stack (including in
- * particular our EX_CONTEXT state) that we can now release
- * the interrupt critical section and replace it with our
- * standard "interrupts disabled" mask value. This allows
- * synchronous interrupts (and profile interrupts) to punch
- * through from this point onwards.
- */
- .ifc \function,handle_nmi
- IRQ_DISABLE_ALL(r20)
- .else
- IRQ_DISABLE(r20, r21)
- .endif
- mtspr INTERRUPT_CRITICAL_SECTION, zero
-
- /*
* Prepare the first 256 stack bytes to be rapidly accessible
* without having to fetch the background data.
*/
beqzt r30, .Lrestore_regs
j 3f
2: TRACE_IRQS_ON
+ IRQ_ENABLE_LOAD(r20, r21)
movei r0, 1
mtspr INTERRUPT_CRITICAL_SECTION, r0
- IRQ_ENABLE(r20, r21)
+ IRQ_ENABLE_APPLY(r20, r21)
beqzt r30, .Lrestore_regs
3:
* that will save some cycles if this turns out to be a syscall.
*/
.Lrestore_regs:
- FEEDBACK_REENTER(interrupt_return) /* called from elsewhere */
/*
* Rotate so we have one high bit and one low bit to test.
*/
static void __init kernel_physical_mapping_init(pgd_t *pgd_base)
{
+ unsigned long long irqmask;
unsigned long address, pfn;
pmd_t *pmd;
pte_t *pte;
* - install pgtables[] as the real page table
* - flush the TLB so the new page table takes effect
*/
+ irqmask = interrupt_mask_save_mask();
+ interrupt_mask_set_mask(-1ULL);
rc = flush_and_install_context(__pa(pgtables),
init_pgprot((unsigned long)pgtables),
__get_cpu_var(current_asid),
cpumask_bits(my_cpu_mask));
+ interrupt_mask_restore_mask(irqmask);
BUG_ON(rc != 0);
/* Copy the page table back to the normal swapper_pg_dir. */
/*
* This function is used as a helper when setting up the initial
* page table (swapper_pg_dir).
+ *
+ * You must mask ALL interrupts prior to invoking this code, since
+ * you can't legally touch the stack during the cache flush.
*/
extern int flush_and_install_context(HV_PhysAddr page_table, HV_PTE access,
HV_ASID asid,
*
* Note that any non-NULL pointers must not point to the page that
* is handled by the stack_pte itself.
+ *
+ * You must mask ALL interrupts prior to invoking this code, since
+ * you can't legally touch the stack during the cache flush.
*/
extern int homecache_migrate_stack_and_flush(pte_t stack_pte, unsigned long va,
size_t length, pte_t *stack_ptep,
#define FRAME_R32 16
#define FRAME_R33 20
#define FRAME_R34 24
-#define FRAME_R35 28
-#define FRAME_SIZE 32
+#define FRAME_SIZE 28
#define r_my_cpumask r5
/* Locals (callee-save); must not be more than FRAME_xxx above. */
-#define r_save_ics r30
-#define r_context_lo r31
-#define r_context_hi r32
-#define r_access_lo r33
-#define r_access_hi r34
-#define r_asid r35
+#define r_context_lo r30
+#define r_context_hi r31
+#define r_access_lo r32
+#define r_access_hi r33
+#define r_asid r34
STD_ENTRY(flush_and_install_context)
/*
sw r_tmp, r33
addi r_tmp, sp, FRAME_R34
}
- {
- sw r_tmp, r34
- addi r_tmp, sp, FRAME_R35
- }
- sw r_tmp, r35
+ sw r_tmp, r34
/* Move some arguments to callee-save registers. */
{
}
move r_asid, r_asid_in
- /* Disable interrupts, since we can't use our stack. */
- {
- mfspr r_save_ics, INTERRUPT_CRITICAL_SECTION
- movei r_tmp, 1
- }
- mtspr INTERRUPT_CRITICAL_SECTION, r_tmp
-
/* First, flush our L2 cache. */
{
move r0, zero /* cache_pa */
}
{
move r4, r_asid
- movei r5, HV_CTX_DIRECTIO
+ moveli r5, HV_CTX_DIRECTIO | CTX_PAGE_FLAG
}
jal hv_install_context
bnz r0, .Ldone
}
.Ldone:
- /* Reset interrupts back how they were before. */
- mtspr INTERRUPT_CRITICAL_SECTION, r_save_ics
-
/* Restore the callee-saved registers and return. */
addli lr, sp, FRAME_SIZE
{
}
{
lw r34, r_tmp
- addli r_tmp, sp, FRAME_R35
- }
- {
- lw r35, r_tmp
addi sp, sp, FRAME_SIZE
}
jrp lr
#define FRAME_R30 16
#define FRAME_R31 24
#define FRAME_R32 32
-#define FRAME_R33 40
-#define FRAME_SIZE 48
+#define FRAME_SIZE 40
#define r_my_cpumask r3
/* Locals (callee-save); must not be more than FRAME_xxx above. */
-#define r_save_ics r30
-#define r_context r31
-#define r_access r32
-#define r_asid r33
+#define r_context r30
+#define r_access r31
+#define r_asid r32
/*
* Caller-save locals and frame constants are the same as
st r_tmp, r31
addi r_tmp, sp, FRAME_R32
}
- {
- st r_tmp, r32
- addi r_tmp, sp, FRAME_R33
- }
- st r_tmp, r33
+ st r_tmp, r32
/* Move some arguments to callee-save registers. */
{
}
move r_asid, r_asid_in
- /* Disable interrupts, since we can't use our stack. */
- {
- mfspr r_save_ics, INTERRUPT_CRITICAL_SECTION
- movei r_tmp, 1
- }
- mtspr INTERRUPT_CRITICAL_SECTION, r_tmp
-
/* First, flush our L2 cache. */
{
move r0, zero /* cache_pa */
}
{
move r2, r_asid
- movei r3, HV_CTX_DIRECTIO
+ moveli r3, HV_CTX_DIRECTIO | CTX_PAGE_FLAG
}
jal hv_install_context
bnez r0, 1f
jal hv_flush_all
}
-1: /* Reset interrupts back how they were before. */
- mtspr INTERRUPT_CRITICAL_SECTION, r_save_ics
-
- /* Restore the callee-saved registers and return. */
+1: /* Restore the callee-saved registers and return. */
addli lr, sp, FRAME_SIZE
{
ld lr, lr
}
{
ld r32, r_tmp
- addli r_tmp, sp, FRAME_R33
- }
- {
- ld r33, r_tmp
addi sp, sp, FRAME_SIZE
}
jrp lr
projects / platform / kernel / linux-exynos.git / commitdiff