net: davinci_emac: drop support for unused PHYs

The boards with SoCs from the DaVinci DM* family used to come with
different PHYs that needed special support implemented in mach-davinci.

Since the support for these chips has long been removed, we can now
drop this unnused code from the emac driver.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

diff --git a/drivers/net/ti/davinci_emac.c b/drivers/net/ti/davinci_emac.c
index bb879d8..9d53984 100644 (file)
--- a/drivers/net/ti/davinci_emac.c
+++ b/drivers/net/ti/davinci_emac.c
@@ -816,55 +816,12 @@ int davinci_emac_initialize(void)
 
                phy_id |= tmp & 0x0000ffff;
 
-               switch (phy_id) {
-#ifdef PHY_KSZ8873
-               case PHY_KSZ8873:
-                       sprintf(phy[i].name, "KSZ8873 @ 0x%02x",
-                                               active_phy_addr[i]);
-                       phy[i].init = ksz8873_init_phy;
-                       phy[i].is_phy_connected = ksz8873_is_phy_connected;
-                       phy[i].get_link_speed = ksz8873_get_link_speed;
-                       phy[i].auto_negotiate = ksz8873_auto_negotiate;
-                       break;
-#endif
-#ifdef PHY_LXT972
-               case PHY_LXT972:
-                       sprintf(phy[i].name, "LXT972 @ 0x%02x",
-                                               active_phy_addr[i]);
-                       phy[i].init = lxt972_init_phy;
-                       phy[i].is_phy_connected = lxt972_is_phy_connected;
-                       phy[i].get_link_speed = lxt972_get_link_speed;
-                       phy[i].auto_negotiate = lxt972_auto_negotiate;
-                       break;
-#endif
-#ifdef PHY_DP83848
-               case PHY_DP83848:
-                       sprintf(phy[i].name, "DP83848 @ 0x%02x",
-                                               active_phy_addr[i]);
-                       phy[i].init = dp83848_init_phy;
-                       phy[i].is_phy_connected = dp83848_is_phy_connected;
-                       phy[i].get_link_speed = dp83848_get_link_speed;
-                       phy[i].auto_negotiate = dp83848_auto_negotiate;
-                       break;
-#endif
-#ifdef PHY_ET1011C
-               case PHY_ET1011C:
-                       sprintf(phy[i].name, "ET1011C @ 0x%02x",
-                                               active_phy_addr[i]);
-                       phy[i].init = gen_init_phy;
-                       phy[i].is_phy_connected = gen_is_phy_connected;
-                       phy[i].get_link_speed = et1011c_get_link_speed;
-                       phy[i].auto_negotiate = gen_auto_negotiate;
-                       break;
-#endif
-               default:
-                       sprintf(phy[i].name, "GENERIC @ 0x%02x",
-                                               active_phy_addr[i]);
-                       phy[i].init = gen_init_phy;
-                       phy[i].is_phy_connected = gen_is_phy_connected;
-                       phy[i].get_link_speed = gen_get_link_speed;
-                       phy[i].auto_negotiate = gen_auto_negotiate;
-               }
+               sprintf(phy[i].name, "GENERIC @ 0x%02x",
+                       active_phy_addr[i]);
+               phy[i].init = gen_init_phy;
+               phy[i].is_phy_connected = gen_is_phy_connected;
+               phy[i].get_link_speed = gen_get_link_speed;
+               phy[i].auto_negotiate = gen_auto_negotiate;
 
                debug("Ethernet PHY: %s\n", phy[i].name);