#include <linux/kernel.h> /* ARRAY_SIZE */
#include <linux/version.h>
#include <linux/module.h>
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
#include <linux/jiffies.h>
-#else
-#include <linux/jffs.h>
-#include <linux/tqueue.h>
-#endif
#include <linux/timer.h>
#include <linux/sched.h>
#include "ieee80211/rtl819x_BA.h"
#include "ieee80211/rtl819x_TS.h"
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20))
-#ifndef bool
-typedef enum{false = 0, true} bool;
-#endif
-#endif
#ifndef IW_MODE_MONITOR
#define IW_MODE_MONITOR 6
#define IWEVCUSTOM 0x8c02
#endif
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
-#ifndef __bitwise
-#define __bitwise __attribute__((bitwise))
-#endif
-typedef __u16 __le16;
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,27))
-struct iw_spy_data{
- /* --- Standard spy support --- */
- int spy_number;
- u_char spy_address[IW_MAX_SPY][ETH_ALEN];
- struct iw_quality spy_stat[IW_MAX_SPY];
- /* --- Enhanced spy support (event) */
- struct iw_quality spy_thr_low; /* Low threshold */
- struct iw_quality spy_thr_high; /* High threshold */
- u_char spy_thr_under[IW_MAX_SPY];
-};
-#endif
-#endif
#ifndef container_of
/**
#define IW_QUAL_NOISE_UPDATED 0x4
#endif
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
-static inline void tq_init(struct tq_struct * task, void(*func)(void *), void *data)
-{
- task->routine = func;
- task->data = data;
- //task->next = NULL;
- INIT_LIST_HEAD(&task->list);
- task->sync = 0;
-}
-#endif
// linux under 2.6.9 release may not support it, so modify it for common use
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,9))
-//#define MSECS(t) (1000 * ((t) / HZ) + 1000 * ((t) % HZ) / HZ)
-#define MSECS(t) (HZ * ((t) / 1000) + (HZ * ((t) % 1000)) / 1000)
-static inline unsigned long msleep_interruptible_rsl(unsigned int msecs)
-{
- unsigned long timeout = MSECS(msecs) + 1;
-
- while (timeout) {
- set_current_state(TASK_INTERRUPTIBLE);
- timeout = schedule_timeout(timeout);
- }
- return timeout;
-}
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,31))
-static inline void msleep(unsigned int msecs)
-{
- unsigned long timeout = MSECS(msecs) + 1;
-
- while (timeout) {
- set_current_state(TASK_UNINTERRUPTIBLE);
- timeout = schedule_timeout(timeout);
- }
-}
-#endif
-#else
#define MSECS(t) msecs_to_jiffies(t)
#define msleep_interruptible_rsl msleep_interruptible
-#endif
#define IEEE80211_DATA_LEN 2304
/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
* information for frames received. Not setting these will not cause
* any adverse affects. */
struct ieee80211_rx_stats {
-#if 1
u32 mac_time[2];
s8 rssi;
u8 signal;
bool bToSelfBA; //cosa add for rssi
char cck_adc_pwdb[4]; //cosa add for rx path selection
u16 Seq_Num;
-#endif
};
#define QOS_OUI_PARAM_SUB_TYPE 1
#define QOS_VERSION_1 1
#define QOS_AIFSN_MIN_VALUE 2
-#if 1
struct ieee80211_qos_information_element {
u8 elementID;
u8 length;
u16 surp_band_allow;
u16 medium_time;
}__attribute__((packed));
-#endif
enum eap_type {
EAP_PACKET = 0,
EAPOL_START,
//UP Mapping to AC, using in MgntQuery_SequenceNumber() and maybe for DSCP
//#define UP2AC(up) ((up<3) ? ((up==0)?1:0) : (up>>1))
-#if 1
#define UP2AC(up) ( \
((up) < 1) ? WME_AC_BE : \
((up) < 3) ? WME_AC_BK : \
((up) < 4) ? WME_AC_BE : \
((up) < 6) ? WME_AC_VI : \
WME_AC_VO)
-#endif
//AC Mapping to UP, using in Tx part for selecting the corresponding TX queue
#define AC2UP(_ac) ( \
((_ac) == WME_AC_VO) ? 6 : \
/* Ensure null-terminated for any debug msgs */
u8 ssid[IW_ESSID_MAX_SIZE + 1];
u8 ssid_len;
-#if 1
struct ieee80211_qos_data qos_data;
-#else
- // Qos related. Added by Annie, 2005-11-01.
- BSS_QOS BssQos;
-#endif
//added by amy for LEAP
bool bWithAironetIE;
bool bCkipSupported;
struct list_head list;
};
-#if 1
enum ieee80211_state {
/* the card is not linked at all */
IEEE80211_LINKED_SCANNING,
};
-#else
-enum ieee80211_state {
- IEEE80211_UNINITIALIZED = 0,
- IEEE80211_INITIALIZED,
- IEEE80211_ASSOCIATING,
- IEEE80211_ASSOCIATED,
- IEEE80211_AUTHENTICATING,
- IEEE80211_AUTHENTICATED,
- IEEE80211_SHUTDOWN
-};
-#endif
#define DEFAULT_MAX_SCAN_AGE (15 * HZ)
#define DEFAULT_FTS 2346
#define IEEE80211_52GHZ_CHANNELS (IEEE80211_52GHZ_MAX_CHANNEL - \
IEEE80211_52GHZ_MIN_CHANNEL + 1)
-#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,11))
-extern inline int is_multicast_ether_addr(const u8 *addr)
-{
- return ((addr[0] != 0xff) && (0x01 & addr[0]));
-}
-#endif
-#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,13))
-extern inline int is_broadcast_ether_addr(const u8 *addr)
-{
- return ((addr[0] == 0xff) && (addr[1] == 0xff) && (addr[2] == 0xff) && \
- (addr[3] == 0xff) && (addr[4] == 0xff) && (addr[5] == 0xff));
-}
-#endif
typedef struct tx_pending_t{
int frag;
bool bIPSModeBackup;
bool bSwRfProcessing;
RT_RF_POWER_STATE eInactivePowerState;
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
struct work_struct InactivePsWorkItem;
-#else
- struct tq_struct InactivePsWorkItem;
-#endif
struct timer_list InactivePsTimer;
// Return point for join action
/* used if IEEE_SOFTMAC_BEACONS is set */
struct timer_list beacon_timer;
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
struct work_struct associate_complete_wq;
struct work_struct associate_procedure_wq;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
struct delayed_work softmac_scan_wq;
struct delayed_work associate_retry_wq;
struct delayed_work start_ibss_wq;
-#else
- struct work_struct softmac_scan_wq;
- struct work_struct associate_retry_wq;
- struct work_struct start_ibss_wq;
-#endif
struct work_struct wx_sync_scan_wq;
struct workqueue_struct *wq;
-#else
- /* used for periodly scan */
- struct timer_list scan_timer;
-
- struct tq_struct associate_complete_wq;
- struct tq_struct associate_retry_wq;
- struct tq_struct start_ibss_wq;
- struct tq_struct associate_procedure_wq;
- struct tq_struct softmac_scan_wq;
- struct tq_struct wx_sync_scan_wq;
-
-#endif
// Qos related. Added by Annie, 2005-11-01.
//STA_QOS StaQos;
void (*ps_request_tx_ack) (struct net_device *dev);
void (*enter_sleep_state) (struct net_device *dev, u32 th, u32 tl);
short (*ps_is_queue_empty) (struct net_device *dev);
-#if 0
- /* Typical STA methods */
- int (*handle_auth) (struct net_device * dev,
- struct ieee80211_auth * auth);
- int (*handle_deauth) (struct net_device * dev,
- struct ieee80211_deauth * auth);
- int (*handle_action) (struct net_device * dev,
- struct ieee80211_action * action,
- struct ieee80211_rx_stats * stats);
- int (*handle_disassoc) (struct net_device * dev,
- struct ieee80211_disassoc * assoc);
-#endif
int (*handle_beacon) (struct net_device * dev, struct ieee80211_beacon * beacon, struct ieee80211_network * network);
-#if 0
- int (*handle_probe_response) (struct net_device * dev,
- struct ieee80211_probe_response * resp,
- struct ieee80211_network * network);
- int (*handle_probe_request) (struct net_device * dev,
- struct ieee80211_probe_request * req,
- struct ieee80211_rx_stats * stats);
-#endif
int (*handle_assoc_response) (struct net_device * dev, struct ieee80211_assoc_response_frame * resp, struct ieee80211_network * network);
-#if 0
- /* Typical AP methods */
- int (*handle_assoc_request) (struct net_device * dev);
- int (*handle_reassoc_request) (struct net_device * dev,
- struct ieee80211_reassoc_request * req);
-#endif
/* check whether Tx hw resouce available */
short (*check_nic_enough_desc)(struct net_device *dev, int queue_index);
static inline void *ieee80211_priv(struct net_device *dev)
{
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
return ((struct ieee80211_device *)netdev_priv(dev))->priv;
-#else
- return ((struct ieee80211_device *)dev->priv)->priv;
-#endif
}
extern inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
union iwreq_data *wrqu, char *b);
//extern void ieee80211_wx_sync_scan_wq(struct ieee80211_device *ieee);
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
extern void ieee80211_wx_sync_scan_wq(struct work_struct *work);
-#else
- extern void ieee80211_wx_sync_scan_wq(struct ieee80211_device *ieee);
-#endif
extern int ieee80211_wx_set_rawtx(struct ieee80211_device *ieee,
* 2. Before write integer to IO.
* 3. After read integer from IO.
*/
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20))
-#ifndef bool
-typedef enum{false = 0, true} bool;
-#endif
-#endif
#define __MACHINE_LITTLE_ENDIAN 1234 /* LSB first: i386, vax */
#define __MACHINE_BIG_ENDIAN 4321 /* MSB first: 68000, ibm, net, ppc */
return tfm->crt_cipher.cit_decrypt(tfm, dst, src, nbytes);
}
-#if 0
-/*
- * crypto_free_tfm - Free crypto transform
- * @tfm: Transform to free
- *
- * crypto_free_tfm() frees up the transform and any associated resources,
- * then drops the refcount on the associated algorithm.
- */
-void crypto_free_tfm(struct crypto_tfm *tfm)
-{
- struct crypto_alg *alg;
- int size;
-
- if (unlikely(!tfm))
- return;
-
- alg = tfm->__crt_alg;
- size = sizeof(*tfm) + alg->cra_ctxsize;
-
- if (alg->cra_exit)
- alg->cra_exit(tfm);
- crypto_exit_ops(tfm);
- crypto_mod_put(alg);
- memset(tfm, 0, size);
- kfree(tfm);
-}
-
-#endif
-#if 1
struct crypto_tfm *crypto_alloc_tfm(const char *name, u32 flags)
{
struct crypto_tfm *tfm = NULL;
return tfm;
}
-#endif
//EXPORT_SYMBOL_GPL(crypto_alloc_tfm);
//EXPORT_SYMBOL_GPL(crypto_free_tfm);
{
u32 i;
PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(ieee);
-#if 0
- if(!pDot11dInfo->bEnabled)
- return;
-#endif
// Clear old channel map
memset(pDot11dInfo->channel_map, 0, MAX_CHANNEL_NUMBER+1);
memset(pDot11dInfo->MaxTxPwrDbmList, 0xFF, MAX_CHANNEL_NUMBER+1);
pTriple = (PCHNL_TXPOWER_TRIPLE)((u8*)pTriple + 3);
}
-#if 1
//printk("Dot11d_UpdateCountryIe(): Channel List:\n");
printk("Channel List:");
for(i=1; i<= MAX_CHANNEL_NUMBER; i++)
if(pDot11dInfo->channel_map[i] > 0)
printk(" %d", i);
printk("\n");
-#endif
UPDATE_CIE_SRC(dev, pTaddr);
return default_chn;
}
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
EXPORT_SYMBOL(Dot11d_Init);
EXPORT_SYMBOL(Dot11d_Reset);
EXPORT_SYMBOL(Dot11d_UpdateCountryIe);
EXPORT_SYMBOL(DOT11D_ScanComplete);
EXPORT_SYMBOL(IsLegalChannel);
EXPORT_SYMBOL(ToLegalChannel);
-#else
-EXPORT_SYMBOL_NOVERS(Dot11d_Init);
-EXPORT_SYMBOL_NOVERS(Dot11d_Reset);
-EXPORT_SYMBOL_NOVERS(Dot11d_UpdateCountryIe);
-EXPORT_SYMBOL_NOVERS(DOT11D_GetMaxTxPwrInDbm);
-EXPORT_SYMBOL_NOVERS(DOT11D_ScanComplete);
-EXPORT_SYMBOL_NOVERS(IsLegalChannel);
-EXPORT_SYMBOL_NOVERS(ToLegalChannel);
-#endif
#endif
#include <linux/kernel.h> /* ARRAY_SIZE */
#include <linux/version.h>
#include <linux/module.h>
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
#include <linux/jiffies.h>
-#else
-#include <linux/jffs.h>
-#include <linux/tqueue.h>
-#endif
#include <linux/timer.h>
#include <linux/sched.h>
#include "rtl819x_BA.h"
#include "rtl819x_TS.h"
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20))
-#ifndef bool
-typedef enum{false = 0, true} bool;
-#endif
-#endif
#ifndef IW_MODE_MONITOR
#define IW_MODE_MONITOR 6
#define IWEVCUSTOM 0x8c02
#endif
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
-#ifndef __bitwise
-#define __bitwise __attribute__((bitwise))
-#endif
-typedef __u16 __le16;
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,27))
-struct iw_spy_data{
- /* --- Standard spy support --- */
- int spy_number;
- u_char spy_address[IW_MAX_SPY][ETH_ALEN];
- struct iw_quality spy_stat[IW_MAX_SPY];
- /* --- Enhanced spy support (event) */
- struct iw_quality spy_thr_low; /* Low threshold */
- struct iw_quality spy_thr_high; /* High threshold */
- u_char spy_thr_under[IW_MAX_SPY];
-};
-#endif
-#endif
#ifndef container_of
/**
#define IW_QUAL_NOISE_UPDATED 0x4
#endif
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
-static inline void tq_init(struct tq_struct * task, void(*func)(void *), void *data)
-{
- task->routine = func;
- task->data = data;
- //task->next = NULL;
- INIT_LIST_HEAD(&task->list);
- task->sync = 0;
-}
-#endif
// linux under 2.6.9 release may not support it, so modify it for common use
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,9))
-//#define MSECS(t) (1000 * ((t) / HZ) + 1000 * ((t) % HZ) / HZ)
-#define MSECS(t) (HZ * ((t) / 1000) + (HZ * ((t) % 1000)) / 1000)
-static inline unsigned long msleep_interruptible_rsl(unsigned int msecs)
-{
- unsigned long timeout = MSECS(msecs) + 1;
-
- while (timeout) {
- set_current_state(TASK_INTERRUPTIBLE);
- timeout = schedule_timeout(timeout);
- }
- return timeout;
-}
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,31))
-static inline void msleep(unsigned int msecs)
-{
- unsigned long timeout = MSECS(msecs) + 1;
-
- while (timeout) {
- set_current_state(TASK_UNINTERRUPTIBLE);
- timeout = schedule_timeout(timeout);
- }
-}
-#endif
-#else
#define MSECS(t) msecs_to_jiffies(t)
#define msleep_interruptible_rsl msleep_interruptible
-#endif
#define IEEE80211_DATA_LEN 2304
/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
* information for frames received. Not setting these will not cause
* any adverse affects. */
struct ieee80211_rx_stats {
-#if 1
u32 mac_time[2];
s8 rssi;
u8 signal;
bool bToSelfBA; //cosa add for rssi
char cck_adc_pwdb[4]; //cosa add for rx path selection
u16 Seq_Num;
-#endif
};
#define QOS_OUI_PARAM_SUB_TYPE 1
#define QOS_VERSION_1 1
#define QOS_AIFSN_MIN_VALUE 2
-#if 1
struct ieee80211_qos_information_element {
u8 elementID;
u8 length;
u16 surp_band_allow;
u16 medium_time;
}__attribute__((packed));
-#endif
enum eap_type {
EAP_PACKET = 0,
EAPOL_START,
//UP Mapping to AC, using in MgntQuery_SequenceNumber() and maybe for DSCP
//#define UP2AC(up) ((up<3) ? ((up==0)?1:0) : (up>>1))
-#if 1
#define UP2AC(up) ( \
((up) < 1) ? WME_AC_BE : \
((up) < 3) ? WME_AC_BK : \
((up) < 4) ? WME_AC_BE : \
((up) < 6) ? WME_AC_VI : \
WME_AC_VO)
-#endif
//AC Mapping to UP, using in Tx part for selecting the corresponding TX queue
#define AC2UP(_ac) ( \
((_ac) == WME_AC_VO) ? 6 : \
/* Ensure null-terminated for any debug msgs */
u8 ssid[IW_ESSID_MAX_SIZE + 1];
u8 ssid_len;
-#if 1
struct ieee80211_qos_data qos_data;
-#else
- // Qos related. Added by Annie, 2005-11-01.
- BSS_QOS BssQos;
-#endif
//added by amy for LEAP
bool bWithAironetIE;
struct list_head list;
};
-#if 1
enum ieee80211_state {
/* the card is not linked at all */
IEEE80211_LINKED_SCANNING,
};
-#else
-enum ieee80211_state {
- IEEE80211_UNINITIALIZED = 0,
- IEEE80211_INITIALIZED,
- IEEE80211_ASSOCIATING,
- IEEE80211_ASSOCIATED,
- IEEE80211_AUTHENTICATING,
- IEEE80211_AUTHENTICATED,
- IEEE80211_SHUTDOWN
-};
-#endif
#define DEFAULT_MAX_SCAN_AGE (15 * HZ)
#define DEFAULT_FTS 2346
#define IEEE80211_52GHZ_CHANNELS (IEEE80211_52GHZ_MAX_CHANNEL - \
IEEE80211_52GHZ_MIN_CHANNEL + 1)
-#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,11))
-extern inline int is_multicast_ether_addr(const u8 *addr)
-{
- return ((addr[0] != 0xff) && (0x01 & addr[0]));
-}
-#endif
-#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,13))
-extern inline int is_broadcast_ether_addr(const u8 *addr)
-{
- return ((addr[0] == 0xff) && (addr[1] == 0xff) && (addr[2] == 0xff) && \
- (addr[3] == 0xff) && (addr[4] == 0xff) && (addr[5] == 0xff));
-}
-#endif
typedef struct tx_pending_t{
int frag;
bool bIPSModeBackup;
bool bSwRfProcessing;
RT_RF_POWER_STATE eInactivePowerState;
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
struct work_struct InactivePsWorkItem;
-#else
- struct tq_struct InactivePsWorkItem;
-#endif
struct timer_list InactivePsTimer;
// Return point for join action
/* used if IEEE_SOFTMAC_BEACONS is set */
struct timer_list beacon_timer;
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
struct work_struct associate_complete_wq;
struct work_struct associate_procedure_wq;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
struct delayed_work softmac_scan_wq;
struct delayed_work associate_retry_wq;
struct delayed_work start_ibss_wq;
-#else
- struct work_struct softmac_scan_wq;
- struct work_struct associate_retry_wq;
- struct work_struct start_ibss_wq;
-#endif
struct work_struct wx_sync_scan_wq;
struct workqueue_struct *wq;
-#else
- /* used for periodly scan */
- struct timer_list scan_timer;
-
- struct tq_struct associate_complete_wq;
- struct tq_struct associate_retry_wq;
- struct tq_struct start_ibss_wq;
- struct tq_struct associate_procedure_wq;
- struct tq_struct softmac_scan_wq;
- struct tq_struct wx_sync_scan_wq;
-
-#endif
// Qos related. Added by Annie, 2005-11-01.
//STA_QOS StaQos;
void (*ps_request_tx_ack) (struct net_device *dev);
void (*enter_sleep_state) (struct net_device *dev, u32 th, u32 tl);
short (*ps_is_queue_empty) (struct net_device *dev);
-#if 0
- /* Typical STA methods */
- int (*handle_auth) (struct net_device * dev,
- struct ieee80211_auth * auth);
- int (*handle_deauth) (struct net_device * dev,
- struct ieee80211_deauth * auth);
- int (*handle_action) (struct net_device * dev,
- struct ieee80211_action * action,
- struct ieee80211_rx_stats * stats);
- int (*handle_disassoc) (struct net_device * dev,
- struct ieee80211_disassoc * assoc);
-#endif
int (*handle_beacon) (struct net_device * dev, struct ieee80211_beacon * beacon, struct ieee80211_network * network);
-#if 0
- int (*handle_probe_response) (struct net_device * dev,
- struct ieee80211_probe_response * resp,
- struct ieee80211_network * network);
- int (*handle_probe_request) (struct net_device * dev,
- struct ieee80211_probe_request * req,
- struct ieee80211_rx_stats * stats);
-#endif
int (*handle_assoc_response) (struct net_device * dev, struct ieee80211_assoc_response_frame * resp, struct ieee80211_network * network);
-#if 0
- /* Typical AP methods */
- int (*handle_assoc_request) (struct net_device * dev);
- int (*handle_reassoc_request) (struct net_device * dev,
- struct ieee80211_reassoc_request * req);
-#endif
/* check whether Tx hw resouce available */
short (*check_nic_enough_desc)(struct net_device *dev, int queue_index);
static inline void *ieee80211_priv(struct net_device *dev)
{
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
return ((struct ieee80211_device *)netdev_priv(dev))->priv;
-#else
- return ((struct ieee80211_device *)dev->priv)->priv;
-#endif
}
extern inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
union iwreq_data *wrqu, char *b);
//extern void ieee80211_wx_sync_scan_wq(struct ieee80211_device *ieee);
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
extern void ieee80211_wx_sync_scan_wq(struct work_struct *work);
-#else
- extern void ieee80211_wx_sync_scan_wq(struct ieee80211_device *ieee);
-#endif
extern int ieee80211_wx_set_rawtx(struct ieee80211_device *ieee,
void ieee80211_crypt_deinit_handler(unsigned long);
void ieee80211_crypt_delayed_deinit(struct ieee80211_device *ieee,
struct ieee80211_crypt_data **crypt);
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
-#define offset_in_page(p) ((unsigned long)(p) & ~PAGE_MASK)
-#endif
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,31))
-#define crypto_alloc_tfm crypto_alloc_tfm_rsl
-#define crypto_free_tfm crypto_free_tfm_rsl
-#endif
#endif
int i;
//struct list_head *p, *q;
// del_timer_sync(&ieee->SwBwTimer);
-#if 1
if (ieee->pHTInfo != NULL)
{
kfree(ieee->pHTInfo);
ieee->pHTInfo = NULL;
}
-#endif
RemoveAllTS(ieee);
ieee80211_softmac_free(ieee);
del_timer_sync(&ieee->crypt_deinit_timer);
u16 fc = le16_to_cpu(hdr->frame_ctl);
skb->dev = ieee->dev;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,22)
skb_reset_mac_header(skb);
-#else
- skb->mac.raw = skb->data;
-#endif
skb_pull(skb, ieee80211_get_hdrlen(fc));
skb->pkt_type = PACKET_OTHERHOST;
if (crypt == NULL || crypt->ops->decrypt_mpdu == NULL)
return 0;
-#if 1
if (ieee->hwsec_active)
{
cb_desc *tcb_desc = (cb_desc *)(skb->cb+ MAX_DEV_ADDR_SIZE);
tcb_desc->bHwSec = 1;
}
-#endif
hdr = (struct ieee80211_hdr_4addr *) skb->data;
hdrlen = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl));
)
{
struct list_head *pList = &pTS->RxPendingPktList;
-#if 1
while(pList->next != &pTS->RxPendingPktList)
{
if( SN_LESS(pReorderEntry->SeqNum, ((PRX_REORDER_ENTRY)list_entry(pList->next,RX_REORDER_ENTRY,List))->SeqNum) )
break;
}
}
-#endif
pReorderEntry->List.next = pList->next;
pReorderEntry->List.next->prev = &pReorderEntry->List;
pReorderEntry->List.prev = pList;
u8 index = 0;
bool bMatchWinStart = false, bPktInBuf = false;
IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): Seq is %d,pTS->RxIndicateSeq is %d, WinSize is %d\n",__FUNCTION__,SeqNum,pTS->RxIndicateSeq,WinSize);
-#if 0
- if(!list_empty(&ieee->RxReorder_Unused_List))
- IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): ieee->RxReorder_Unused_List is nut NULL\n");
-#endif
/* Rx Reorder initialize condition.*/
if(pTS->RxIndicateSeq == 0xffff) {
pTS->RxIndicateSeq = SeqNum;
pReorderEntry->prxb = prxb;
// IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): pREorderEntry->SeqNum is %d\n",__FUNCTION__,pReorderEntry->SeqNum);
-#if 1
if(!AddReorderEntry(pTS, pReorderEntry)) {
IEEE80211_DEBUG(IEEE80211_DL_REORDER, "%s(): Duplicate packet is dropped!! IndicateSeq: %d, NewSeq: %d\n",
__FUNCTION__, pTS->RxIndicateSeq, SeqNum);
IEEE80211_DEBUG(IEEE80211_DL_REORDER,
"Pkt insert into buffer!! IndicateSeq: %d, NewSeq: %d\n",pTS->RxIndicateSeq, SeqNum);
}
-#endif
}
else {
/*
/* Check if there is any packet need indicate.*/
while(!list_empty(&pTS->RxPendingPktList)) {
IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): start RREORDER indicate\n",__FUNCTION__);
-#if 1
pReorderEntry = (PRX_REORDER_ENTRY)list_entry(pTS->RxPendingPktList.prev,RX_REORDER_ENTRY,List);
if( SN_LESS(pReorderEntry->SeqNum, pTS->RxIndicateSeq) ||
SN_EQUAL(pReorderEntry->SeqNum, pTS->RxIndicateSeq))
bPktInBuf = true;
break;
}
-#endif
}
/* Handling pending timer. Set this timer to prevent from long time Rx buffering.*/
ieee80211_indicate_packets(ieee, prxbIndicateArray, index);
}
-#if 1
if(bPktInBuf && pTS->RxTimeoutIndicateSeq==0xffff) {
// Set new pending timer.
IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): SET rx timeout timer\n", __FUNCTION__);
pTS->RxPktPendingTimer.expires = jiffies + MSECS(pHTInfo->RxReorderPendingTime);
add_timer(&pTS->RxPktPendingTimer);
}
-#endif
}
u8 parse_subframe(struct sk_buff *skb,
nSubframe_Length = (nSubframe_Length>>8) + (nSubframe_Length<<8);
if(skb->len<(ETHERNET_HEADER_SIZE + nSubframe_Length)) {
-#if 0//cosa
- RT_ASSERT(
- (nRemain_Length>=(ETHERNET_HEADER_SIZE + nSubframe_Length)),
- ("ParseSubframe(): A-MSDU subframe parse error!! Subframe Length: %d\n", nSubframe_Length) );
-#endif
printk("%s: A-MSDU parse error!! pRfd->nTotalSubframe : %d\n",\
__FUNCTION__,rxb->nr_subframes);
printk("%s: A-MSDU parse error!! Subframe Length: %d\n",__FUNCTION__, nSubframe_Length);
else
{
PRX_TS_RECORD pRxTS = NULL;
- #if 0
- struct ieee80211_hdr_3addr *hdr;
- u16 fc;
- hdr = (struct ieee80211_hdr_3addr *)skb->data;
- fc = le16_to_cpu(hdr->frame_ctl);
- u8 tmp = (fc & IEEE80211_FCTL_FROMDS) && (fc & IEEE80211_FCTL_TODS);
-
- u8 tid = (*((u8*)skb->data + (((fc& IEEE80211_FCTL_FROMDS) && (fc & IEEE80211_FCTL_TODS))?30:24)))&0xf;
- printk("====================>fc:%x, tid:%d, tmp:%d\n", fc, tid, tmp);
- //u8 tid = (u8)((frameqos*)(buf + ((fc & IEEE80211_FCTL_TODS)&&(fc & IEEE80211_FCTL_FROMDS))? 30 : 24))->field.tid;
- #endif
//IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): QOS ENABLE AND RECEIVE QOS DATA , we will get Ts, tid:%d\n",__FUNCTION__, tid);
-#if 1
if(GetTs(
ieee,
(PTS_COMMON_INFO*) &pRxTS,
goto rx_dropped;
}
}
-#endif
if (type == IEEE80211_FTYPE_MGMT) {
- #if 0
- if ( stype == IEEE80211_STYPE_AUTH &&
- fc & IEEE80211_FCTL_WEP && ieee->host_decrypt &&
- (keyidx = hostap_rx_frame_decrypt(ieee, skb, crypt)) < 0)
- {
- printk(KERN_DEBUG "%s: failed to decrypt mgmt::auth "
- "from " MAC_FMT "\n", dev->name,
- MAC_ARG(hdr->addr2));
- /* TODO: could inform hostapd about this so that it
- * could send auth failure report */
- goto rx_dropped;
- }
- #endif
//IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA, skb->data, skb->len);
if (ieee80211_rx_frame_mgmt(ieee, skb, rx_stats, type, stype))
}
*/
//added by amy for reorder
-#if 1
if(ieee->current_network.qos_data.active && IsQoSDataFrame(skb->data)
&& !is_multicast_ether_addr(hdr->addr1) && !is_broadcast_ether_addr(hdr->addr1))
{
ieee->bis_any_nonbepkts = true;
}
}
-#endif
//added by amy for reorder
/* skb: hdr + (possible reassembled) full plaintext payload */
payload = skb->data + hdrlen;
}
}
-#if 0
- if (tmp_htcap_len !=0)
- {
- u16 cap_ext = ((PHT_CAPABILITY_ELE)&info_element->data[0])->ExtHTCapInfo;
- if ((cap_ext & 0x0c00) == 0x0c00)
- {
- network->ralink_cap_exist = true;
- }
- }
-#endif
if(info_element->len >= 3 &&
info_element->data[0] == 0x00 &&
info_element->data[1] == 0x0c &&
break;
#endif
/* TODO */
-#if 0
- /* 802.11h */
- case MFIE_TYPE_POWER_CONSTRAINT:
- network->power_constraint = info_element->data[0];
- network->flags |= NETWORK_HAS_POWER_CONSTRAINT;
- break;
-
- case MFIE_TYPE_CSA:
- network->power_constraint = info_element->data[0];
- network->flags |= NETWORK_HAS_CSA;
- break;
-
- case MFIE_TYPE_QUIET:
- network->quiet.count = info_element->data[0];
- network->quiet.period = info_element->data[1];
- network->quiet.duration = info_element->data[2];
- network->quiet.offset = info_element->data[3];
- network->flags |= NETWORK_HAS_QUIET;
- break;
-
- case MFIE_TYPE_IBSS_DFS:
- if (network->ibss_dfs)
- break;
- network->ibss_dfs = kmemdup(info_element->data,
- info_element->len,
- GFP_ATOMIC);
- if (!network->ibss_dfs)
- return 1;
- network->flags |= NETWORK_HAS_IBSS_DFS;
- break;
-
- case MFIE_TYPE_TPC_REPORT:
- network->tpc_report.transmit_power =
- info_element->data[0];
- network->tpc_report.link_margin = info_element->data[1];
- network->flags |= NETWORK_HAS_TPC_REPORT;
- break;
-#endif
default:
IEEE80211_DEBUG_MGMT
("Unsupported info element: %s (%d)\n",
if (ieee80211_is_empty_essid(network->ssid, network->ssid_len))
network->flags |= NETWORK_EMPTY_ESSID;
-#if 1
stats->signal = 30 + (stats->SignalStrength * 70) / 100;
//stats->signal = ieee80211_SignalStrengthTranslate(stats->signal);
stats->noise = ieee80211_translate_todbm((u8)(100-stats->signal)) -25;
-#endif
memcpy(&network->stats, stats, sizeof(network->stats));
dst->qos_data.old_param_count = old_param;
/* dst->last_associate is not overwritten */
-#if 1
dst->wmm_info = src->wmm_info; //sure to exist in beacon or probe response frame.
if(src->wmm_param[0].ac_aci_acm_aifsn|| \
src->wmm_param[1].ac_aci_acm_aifsn|| \
memcpy(dst->wmm_param, src->wmm_param, WME_AC_PRAM_LEN);
}
//dst->QoS_Enable = src->QoS_Enable;
-#else
- dst->QoS_Enable = 1;//for Rtl8187 simulation
-#endif
#ifdef THOMAS_TURBO
dst->Turbo_Enable = src->Turbo_Enable;
#endif
}
}
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
EXPORT_SYMBOL(ieee80211_rx_mgt);
EXPORT_SYMBOL(ieee80211_rx);
-#else
-EXPORT_SYMBOL_NOVERS(ieee80211_rx_mgt);
-EXPORT_SYMBOL_NOVERS(ieee80211_rx);
-#endif
}
}
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-/* called both by wq with ieee->lock held */
-void ieee80211_softmac_scan(struct ieee80211_device *ieee)
-{
-#if 0
- short watchdog = 0;
- do{
- ieee->current_network.channel =
- (ieee->current_network.channel + 1) % MAX_CHANNEL_NUMBER;
- if (watchdog++ > MAX_CHANNEL_NUMBER)
- return; /* no good chans */
-
- }while(!ieee->channel_map[ieee->current_network.channel]);
-#endif
-
- schedule_task(&ieee->softmac_scan_wq);
-}
-#endif
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
void ieee80211_softmac_scan_wq(struct work_struct *work)
{
struct delayed_work *dwork = container_of(work, struct delayed_work, work);
struct ieee80211_device *ieee = container_of(dwork, struct ieee80211_device, softmac_scan_wq);
-#else
-void ieee80211_softmac_scan_wq(struct ieee80211_device *ieee)
-{
-#endif
static short watchdog = 0;
#ifdef ENABLE_DOT11D
u8 channel_map[MAX_CHANNEL_NUMBER+1];
ieee80211_send_probe_requests(ieee);
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
queue_delayed_work(ieee->wq, &ieee->softmac_scan_wq, IEEE80211_SOFTMAC_SCAN_TIME);
-#else
- //ieee->scan_timer.expires = jiffies + MSECS(IEEE80211_SOFTMAC_SCAN_TIME);
- if (ieee->scanning == 1)
- mod_timer(&ieee->scan_timer,(jiffies + MSECS(IEEE80211_SOFTMAC_SCAN_TIME)));
-#endif
up(&ieee->scan_sem);
return;
up(&ieee->scan_sem);
}
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-void ieee80211_softmac_scan_cb(unsigned long _dev)
-{
- unsigned long flags;
- struct ieee80211_device *ieee = (struct ieee80211_device *)_dev;
-
- spin_lock_irqsave(&ieee->lock, flags);
- ieee80211_softmac_scan(ieee);
- spin_unlock_irqrestore(&ieee->lock, flags);
-}
-#endif
void ieee80211_beacons_start(struct ieee80211_device *ieee)
if (ieee->scanning == 1){
ieee->scanning = 0;
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
cancel_delayed_work(&ieee->softmac_scan_wq);
-#else
- del_timer_sync(&ieee->scan_timer);
-#endif
}
// spin_unlock_irqrestore(&ieee->lock, flags);
if (ieee->softmac_features & IEEE_SOFTMAC_SCAN){
if (ieee->scanning == 0){
ieee->scanning = 1;
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
queue_delayed_work(ieee->wq, &ieee->softmac_scan_wq, 0);
-#else
-
- queue_work(ieee->wq, &ieee->softmac_scan_wq);
-#endif
-#else
- ieee80211_softmac_scan(ieee);
-#endif
}
}else
ieee->start_scan(ieee->dev);
else
atim_len = 0;
-#if 1
if(ieee80211_is_54g(ieee->current_network))
erp_len = 3;
else
erp_len = 0;
-#else
- if((ieee->current_network.mode == IEEE_G)
- ||( ieee->current_network.mode == IEEE_N_24G && ieee->pHTInfo->bCurSuppCCK)) {
- erp_len = 3;
- erpinfo_content = 0;
- if(ieee->current_network.buseprotection)
- erpinfo_content |= ERP_UseProtection;
- }
- else
- erp_len = 0;
-#endif
crypt = ieee->crypt[ieee->tx_keyidx];
encrypt = ieee->host_encrypt && crypt && crypt->ops &&
((0 == strcmp(crypt->ops->name, "WEP") || wpa_ie_len));
//HT ralated element
-#if 1
tmp_ht_cap_buf =(u8*) &(ieee->pHTInfo->SelfHTCap);
tmp_ht_cap_len = sizeof(ieee->pHTInfo->SelfHTCap);
tmp_ht_info_buf =(u8*) &(ieee->pHTInfo->SelfHTInfo);
HTConstructRT2RTAggElement(ieee, tmp_generic_ie_buf, &tmp_generic_ie_len);
}
// printk("===============>tmp_ht_cap_len is %d,tmp_ht_info_len is %d, tmp_generic_ie_len is %d\n",tmp_ht_cap_len,tmp_ht_info_len,tmp_generic_ie_len);
-#endif
beacon_size = sizeof(struct ieee80211_probe_response)+2+
ssid_len
+3 //channel
cpu_to_le16((beacon_buf->capability |= WLAN_CAPABILITY_SHORT_SLOT));
crypt = ieee->crypt[ieee->tx_keyidx];
-#if 0
- encrypt = ieee->host_encrypt && crypt && crypt->ops &&
- (0 == strcmp(crypt->ops->name, "WEP"));
-#endif
if (encrypt)
beacon_buf->capability |= cpu_to_le16(WLAN_CAPABILITY_PRIVACY);
*(tag++) = 1;
*(tag++) = erpinfo_content;
}
-#if 0
- //Include High Throuput capability
-
- *(tag++) = MFIE_TYPE_HT_CAP;
- *(tag++) = tmp_ht_cap_len - 2;
- memcpy(tag, tmp_ht_cap_buf, tmp_ht_cap_len - 2);
- tag += tmp_ht_cap_len - 2;
-#endif
if(rate_ex_len){
*(tag++) = MFIE_TYPE_RATES_EX;
*(tag++) = rate_ex_len-2;
tag+=rate_ex_len-2;
}
-#if 0
- //Include High Throuput info
-
- *(tag++) = MFIE_TYPE_HT_INFO;
- *(tag++) = tmp_ht_info_len - 2;
- memcpy(tag, tmp_ht_info_buf, tmp_ht_info_len -2);
- tag += tmp_ht_info_len - 2;
-#endif
if (wpa_ie_len)
{
if (ieee->iw_mode == IW_MODE_ADHOC)
tag += wpa_ie_len;
}
-#if 0
- //
- // Construct Realtek Proprietary Aggregation mode (Set AMPDU Factor to 2, 32k)
- //
- if(pHTInfo->bRegRT2RTAggregation)
- {
- (*tag++) = 0xdd;
- (*tag++) = tmp_generic_ie_len - 2;
- memcpy(tag,tmp_generic_ie_buf,tmp_generic_ie_len -2);
- tag += tmp_generic_ie_len -2;
-
- }
-#endif
-#if 0
- if(ieee->qos_support)
- {
- (*tag++) = 0xdd;
- (*tag++) = wmm_len;
- memcpy(tag,QosOui,wmm_len);
- tag += wmm_len;
- }
-#endif
//skb->dev = ieee->dev;
return skb;
}
ieee->state = IEEE80211_ASSOCIATING_RETRY;
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
queue_delayed_work(ieee->wq, &ieee->associate_retry_wq, \
IEEE80211_SOFTMAC_ASSOC_RETRY_TIME);
-#else
- schedule_task(&ieee->associate_retry_wq);
-#endif
spin_unlock_irqrestore(&ieee->lock, flags);
}
softmac_mgmt_xmit(skb, ieee);
mod_timer(&ieee->associate_timer, jiffies + (HZ/2));
-#if 0
- ieee->associate_timer.expires = jiffies + (HZ / 2);
- add_timer(&ieee->associate_timer);
-#endif
//dev_kfree_skb_any(skb);//edit by thomas
}
kfree(challenge);
else{
softmac_mgmt_xmit(skb, ieee);
mod_timer(&ieee->associate_timer, jiffies + (HZ/2));
-#if 0
- ieee->associate_timer.expires = jiffies + (HZ / 2);
- add_timer(&ieee->associate_timer);
-#endif
//dev_kfree_skb_any(skb);//edit by thomas
}
}
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
void ieee80211_associate_complete_wq(struct work_struct *work)
{
struct ieee80211_device *ieee = container_of(work, struct ieee80211_device, associate_complete_wq);
-#else
-void ieee80211_associate_complete_wq(struct ieee80211_device *ieee)
-{
-#endif
printk(KERN_INFO "Associated successfully\n");
if(ieee80211_is_54g(ieee->current_network) &&
(ieee->modulation & IEEE80211_OFDM_MODULATION)){
// struct net_device* dev = ieee->dev;
del_timer_sync(&ieee->associate_timer);
-#if 0
- for(i = 0; i < 6; i++) {
- ieee->seq_ctrl[i] = 0;
- }
-#endif
ieee->state = IEEE80211_LINKED;
-#if 0
- if (ieee->pHTInfo->bCurrentHTSupport)
- {
- printk("Successfully associated, ht enabled\n");
- queue_work(ieee->wq, &ieee->ht_onAssRsp);
- }
- else
- {
- printk("Successfully associated, ht not enabled\n");
- memset(ieee->dot11HTOperationalRateSet, 0, 16);
- HTSetConnectBwMode(ieee, HT_CHANNEL_WIDTH_20, HT_EXTCHNL_OFFSET_NO_EXT);
- }
-#endif
//ieee->UpdateHalRATRTableHandler(dev, ieee->dot11HTOperationalRateSet);
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
queue_work(ieee->wq, &ieee->associate_complete_wq);
-#else
- schedule_task(&ieee->associate_complete_wq);
-#endif
}
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
void ieee80211_associate_procedure_wq(struct work_struct *work)
{
struct ieee80211_device *ieee = container_of(work, struct ieee80211_device, associate_procedure_wq);
-#else
-void ieee80211_associate_procedure_wq(struct ieee80211_device *ieee)
-{
-#endif
ieee->sync_scan_hurryup = 1;
down(&ieee->wx_sem);
}
ieee->state = IEEE80211_ASSOCIATING;
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
queue_work(ieee->wq, &ieee->associate_procedure_wq);
-#else
- schedule_task(&ieee->associate_procedure_wq);
-#endif
}else{
if(ieee80211_is_54g(ieee->current_network) &&
(ieee->modulation & IEEE80211_OFDM_MODULATION)){
printk(KERN_INFO"New client associated: "MAC_FMT"\n", MAC_ARG(dest));
//FIXME
- #if 0
- spin_lock_irqsave(&ieee->lock,flags);
- add_associate(ieee,dest);
- spin_unlock_irqrestore(&ieee->lock,flags);
- #endif
}
"Association response status code 0x%x\n",
errcode);
if(ieee->AsocRetryCount < RT_ASOC_RETRY_LIMIT) {
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
queue_work(ieee->wq, &ieee->associate_procedure_wq);
-#else
- schedule_task(&ieee->associate_procedure_wq);
-#endif
} else {
ieee80211_associate_abort(ieee);
}
notify_wx_assoc_event(ieee);
//HTSetConnectBwMode(ieee, HT_CHANNEL_WIDTH_20, HT_EXTCHNL_OFFSET_NO_EXT);
RemovePeerTS(ieee, header->addr2);
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
queue_work(ieee->wq, &ieee->associate_procedure_wq);
-#else
- schedule_task(&ieee->associate_procedure_wq);
-#endif
}
break;
case IEEE80211_STYPE_MANAGE_ACT:
if(tcb_desc->bMulticast) {
ieee->stats.multicast++;
}
-#if 1
/* if xmit available, just xmit it immediately, else just insert it to the wait queue */
for(i = 0; i < txb->nr_frags; i++) {
#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
//ieee->dev->trans_start = jiffies;
}
}
-#endif
ieee80211_txb_free(txb);
//exit:
netif_carrier_on(ieee->dev);
}
}
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
void ieee80211_start_ibss_wq(struct work_struct *work)
{
struct delayed_work *dwork = container_of(work, struct delayed_work, work);
struct ieee80211_device *ieee = container_of(dwork, struct ieee80211_device, start_ibss_wq);
-#else
-void ieee80211_start_ibss_wq(struct ieee80211_device *ieee)
-{
-#endif
/* iwconfig mode ad-hoc will schedule this and return
* on the other hand this will block further iwconfig SET
* operations because of the wx_sem hold.
inline void ieee80211_start_ibss(struct ieee80211_device *ieee)
{
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
queue_delayed_work(ieee->wq, &ieee->start_ibss_wq, 150);
-#else
- schedule_task(&ieee->start_ibss_wq);
-#endif
}
/* this is called only in user context, with wx_sem held */
notify_wx_assoc_event(ieee);
}
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
void ieee80211_associate_retry_wq(struct work_struct *work)
{
struct delayed_work *dwork = container_of(work, struct delayed_work, work);
struct ieee80211_device *ieee = container_of(dwork, struct ieee80211_device, associate_retry_wq);
-#else
-void ieee80211_associate_retry_wq(struct ieee80211_device *ieee)
-{
-#endif
unsigned long flags;
down(&ieee->wx_sem);
ieee80211_stop_send_beacons(ieee);
del_timer_sync(&ieee->associate_timer);
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
cancel_delayed_work(&ieee->associate_retry_wq);
cancel_delayed_work(&ieee->start_ibss_wq);
-#endif
ieee80211_stop_scan(ieee);
ieee80211_disassociate(ieee);
ieee->sta_edca_param[3] = 0x002F3262;
ieee->aggregation = true;
ieee->enable_rx_imm_BA = 1;
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
- init_timer(&ieee->scan_timer);
- ieee->scan_timer.data = (unsigned long)ieee;
- ieee->scan_timer.function = ieee80211_softmac_scan_cb;
-#endif
ieee->tx_pending.txb = NULL;
init_timer(&ieee->associate_timer);
ieee->beacon_timer.data = (unsigned long) ieee;
ieee->beacon_timer.function = ieee80211_send_beacon_cb;
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
#ifdef PF_SYNCTHREAD
ieee->wq = create_workqueue(DRV_NAME,0);
#else
ieee->wq = create_workqueue(DRV_NAME);
#endif
-#endif
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
INIT_DELAYED_WORK(&ieee->start_ibss_wq,ieee80211_start_ibss_wq);
INIT_WORK(&ieee->associate_complete_wq, ieee80211_associate_complete_wq);
INIT_WORK(&ieee->associate_procedure_wq, ieee80211_associate_procedure_wq);
INIT_DELAYED_WORK(&ieee->associate_retry_wq, ieee80211_associate_retry_wq);
INIT_WORK(&ieee->wx_sync_scan_wq,ieee80211_wx_sync_scan_wq);
-#else
- INIT_WORK(&ieee->start_ibss_wq,(void(*)(void*)) ieee80211_start_ibss_wq,ieee);
- INIT_WORK(&ieee->associate_retry_wq,(void(*)(void*)) ieee80211_associate_retry_wq,ieee);
- INIT_WORK(&ieee->associate_complete_wq,(void(*)(void*)) ieee80211_associate_complete_wq,ieee);
- INIT_WORK(&ieee->associate_procedure_wq,(void(*)(void*)) ieee80211_associate_procedure_wq,ieee);
- INIT_WORK(&ieee->softmac_scan_wq,(void(*)(void*)) ieee80211_softmac_scan_wq,ieee);
- INIT_WORK(&ieee->wx_sync_scan_wq,(void(*)(void*)) ieee80211_wx_sync_scan_wq,ieee);
-#endif
-#else
- tq_init(&ieee->start_ibss_wq,(void(*)(void*)) ieee80211_start_ibss_wq,ieee);
- tq_init(&ieee->associate_retry_wq,(void(*)(void*)) ieee80211_associate_retry_wq,ieee);
- tq_init(&ieee->associate_complete_wq,(void(*)(void*)) ieee80211_associate_complete_wq,ieee);
- tq_init(&ieee->associate_procedure_wq,(void(*)(void*)) ieee80211_associate_procedure_wq,ieee);
- tq_init(&ieee->softmac_scan_wq,(void(*)(void*)) ieee80211_softmac_scan_wq,ieee);
- tq_init(&ieee->wx_sync_scan_wq,(void(*)(void*)) ieee80211_wx_sync_scan_wq,ieee);
-#endif
sema_init(&ieee->wx_sem, 1);
sema_init(&ieee->scan_sem, 1);
#endif
del_timer_sync(&ieee->associate_timer);
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
cancel_delayed_work(&ieee->associate_retry_wq);
destroy_workqueue(ieee->wq);
-#endif
up(&ieee->wx_sem);
}
}
memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data));
new_crypt->ops = ops;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
if (new_crypt->ops && try_module_get(new_crypt->ops->owner))
-#else
- if (new_crypt->ops && try_inc_mod_count(new_crypt->ops->owner))
-#endif
new_crypt->priv =
new_crypt->ops->init(param->u.crypt.idx);
wireless_send_event(ieee->dev, SIOCGIWAP, &wrqu, NULL);
}
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
EXPORT_SYMBOL(ieee80211_get_beacon);
EXPORT_SYMBOL(ieee80211_wake_queue);
EXPORT_SYMBOL(ieee80211_stop_queue);
EXPORT_SYMBOL(ieee80211_send_probe_requests);
EXPORT_SYMBOL(ieee80211_softmac_scan_syncro);
EXPORT_SYMBOL(ieee80211_start_scan_syncro);
-#else
-EXPORT_SYMBOL_NOVERS(ieee80211_get_beacon);
-EXPORT_SYMBOL_NOVERS(ieee80211_wake_queue);
-EXPORT_SYMBOL_NOVERS(ieee80211_stop_queue);
-EXPORT_SYMBOL_NOVERS(ieee80211_reset_queue);
-EXPORT_SYMBOL_NOVERS(ieee80211_softmac_stop_protocol);
-EXPORT_SYMBOL_NOVERS(ieee80211_softmac_start_protocol);
-EXPORT_SYMBOL_NOVERS(ieee80211_is_shortslot);
-EXPORT_SYMBOL_NOVERS(ieee80211_is_54g);
-EXPORT_SYMBOL_NOVERS(ieee80211_wpa_supplicant_ioctl);
-EXPORT_SYMBOL_NOVERS(ieee80211_ps_tx_ack);
-EXPORT_SYMBOL_NOVERS(ieee80211_softmac_xmit);
-EXPORT_SYMBOL_NOVERS(ieee80211_stop_send_beacons);
-EXPORT_SYMBOL_NOVERS(notify_wx_assoc_event);
-EXPORT_SYMBOL_NOVERS(SendDisassociation);
-EXPORT_SYMBOL_NOVERS(ieee80211_disassociate);
-EXPORT_SYMBOL_NOVERS(ieee80211_start_send_beacons);
-EXPORT_SYMBOL_NOVERS(ieee80211_stop_scan);
-EXPORT_SYMBOL_NOVERS(ieee80211_send_probe_requests);
-EXPORT_SYMBOL_NOVERS(ieee80211_softmac_scan_syncro);
-EXPORT_SYMBOL_NOVERS(ieee80211_start_scan_syncro);
-#endif
//EXPORT_SYMBOL(ieee80211_sta_ps_send_null_frame);
union iwreq_data *wrqu, char *extra)
{
u32 tmp_rate;
-#if 0
- printk("===>mode:%d, halfNmode:%d\n", ieee->mode, ieee->bHalfWirelessN24GMode);
- if (ieee->mode & (IEEE_A | IEEE_B | IEEE_G))
- tmp_rate = ieee->rate;
- else if (ieee->mode & IEEE_N_5G)
- tmp_rate = 580;
- else if (ieee->mode & IEEE_N_24G)
- {
- if (ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev))
- tmp_rate = HTHalfMcsToDataRate(ieee, 15);
- else
- tmp_rate = HTMcsToDataRate(ieee, 15);
- }
-#else
tmp_rate = TxCountToDataRate(ieee, ieee->softmac_stats.CurrentShowTxate);
-#endif
wrqu->bitrate.value = tmp_rate * 500000;
return 0;
return 0;
}
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
void ieee80211_wx_sync_scan_wq(struct work_struct *work)
{
struct ieee80211_device *ieee = container_of(work, struct ieee80211_device, wx_sync_scan_wq);
-#else
-void ieee80211_wx_sync_scan_wq(struct ieee80211_device *ieee)
-{
-#endif
short chan;
HT_EXTCHNL_OFFSET chan_offset=0;
HT_CHANNEL_WIDTH bandwidth=0;
}
if ( ieee->state == IEEE80211_LINKED){
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
queue_work(ieee->wq, &ieee->wx_sync_scan_wq);
-#else
- schedule_task(&ieee->wx_sync_scan_wq);
-#endif
/* intentionally forget to up sem */
return 0;
}
if (wrqu->essid.flags && wrqu->essid.length) {
//first flush current network.ssid
len = ((wrqu->essid.length-1) < IW_ESSID_MAX_SIZE) ? (wrqu->essid.length-1) : IW_ESSID_MAX_SIZE;
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
- strncpy(ieee->current_network.ssid, extra, len);
- ieee->current_network.ssid_len = len;
-#if 0
- {
- int i;
- for (i=0; i<len; i++)
- printk("%c ", extra[i]);
- printk("\n");
- }
-#endif
-#else
strncpy(ieee->current_network.ssid, extra, len+1);
ieee->current_network.ssid_len = len+1;
-#if 0
- {
- int i;
- for (i=0; i<len + 1; i++)
- printk("%c ", extra[i]);
- printk("\n");
- }
-#endif
-#endif
ieee->ssid_set = 1;
}
else{
union iwreq_data *wrqu, char *extra)
{
int ret = 0;
-#if 0
- if(
- (!ieee->sta_wake_up) ||
- (!ieee->ps_request_tx_ack) ||
- (!ieee->enter_sleep_state) ||
- (!ieee->ps_is_queue_empty)){
-
- // printk("ERROR. PS mode is tryied to be use but driver missed a callback\n\n");
-
- return -1;
- }
-#endif
down(&ieee->wx_sem);
if (wrqu->power.disabled){
return ret;
}
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
EXPORT_SYMBOL(ieee80211_wx_get_essid);
EXPORT_SYMBOL(ieee80211_wx_set_essid);
EXPORT_SYMBOL(ieee80211_wx_set_rate);
EXPORT_SYMBOL(ieee80211_wlan_frequencies);
EXPORT_SYMBOL(ieee80211_wx_set_rts);
EXPORT_SYMBOL(ieee80211_wx_get_rts);
-#else
-EXPORT_SYMBOL_NOVERS(ieee80211_wx_get_essid);
-EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_essid);
-EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_rate);
-EXPORT_SYMBOL_NOVERS(ieee80211_wx_get_rate);
-EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_wap);
-EXPORT_SYMBOL_NOVERS(ieee80211_wx_get_wap);
-EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_mode);
-EXPORT_SYMBOL_NOVERS(ieee80211_wx_get_mode);
-EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_scan);
-EXPORT_SYMBOL_NOVERS(ieee80211_wx_get_freq);
-EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_freq);
-EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_rawtx);
-EXPORT_SYMBOL_NOVERS(ieee80211_wx_get_name);
-EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_power);
-EXPORT_SYMBOL_NOVERS(ieee80211_wx_get_power);
-EXPORT_SYMBOL_NOVERS(ieee80211_wlan_frequencies);
-EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_rts);
-EXPORT_SYMBOL_NOVERS(ieee80211_wx_get_rts);
-#endif
//int i;
if (unlikely(!txb))
return;
-#if 0
- for (i = 0; i < txb->nr_frags; i++)
- if (txb->fragments[i])
- dev_kfree_skb_any(txb->fragments[i]);
-#endif
kfree(txb);
}
return 0;
// IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA, skb->data, skb->len);
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,22))
ip = ip_hdr(skb);
-#else
- ip = (struct iphdr*)(skb->data + sizeof(struct ether_header));
-#endif
switch (ip->tos & 0xfc) {
case 0x20:
return 2;
if(!Adapter->HalFunc.GetNmodeSupportBySecCfgHandler(Adapter))
return;
#endif
-#if 1
if(!ieee->GetNmodeSupportBySecCfg(ieee->dev))
{
return;
}
-#endif
if(pHTInfo->bCurrentAMPDUEnable)
{
if (!GetTs(ieee, (PTS_COMMON_INFO*)(&pTxTs), hdr->addr1, skb->priority, TX_DIR, true))
int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
{
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0))
struct ieee80211_device *ieee = netdev_priv(dev);
-#else
- struct ieee80211_device *ieee = (struct ieee80211_device *)dev->priv;
-#endif
struct ieee80211_txb *txb = NULL;
struct ieee80211_hdr_3addrqos *frag_hdr;
int i, bytes_per_frag, nr_frags, bytes_last_frag, frag_size;
//WB add to fill data tcb_desc here. only first fragment is considered, need to change, and you may remove to other place.
if (txb)
{
-#if 1
cb_desc *tcb_desc = (cb_desc *)(txb->fragments[0]->cb + MAX_DEV_ADDR_SIZE);
tcb_desc->bTxEnableFwCalcDur = 1;
if (is_multicast_ether_addr(header.addr1))
ieee80211_query_seqnum(ieee, txb->fragments[0], header.addr1);
// IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA, txb->fragments[0]->data, txb->fragments[0]->len);
//IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA, tcb_desc, sizeof(cb_desc));
-#endif
}
spin_unlock_irqrestore(&ieee->lock, flags);
dev_kfree_skb_any(skb);
#include <linux/module.h>
#include "ieee80211.h"
-#if 0
-static const char *ieee80211_modes[] = {
- "?", "a", "b", "ab", "g", "ag", "bg", "abg"
-};
-#endif
struct modes_unit {
char *mode_string;
int mode_size;
{"N-5G",4},
};
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,4,20)) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
-static inline char *
-iwe_stream_add_event_rsl(char * stream, /* Stream of events */
- char * ends, /* End of stream */
- struct iw_event *iwe, /* Payload */
- int event_len) /* Real size of payload */
-{
- /* Check if it's possible */
- if((stream + event_len) < ends) {
- iwe->len = event_len;
- ndelay(1); //new
- memcpy(stream, (char *) iwe, event_len);
- stream += event_len;
- }
- return stream;
-}
-#else
#define iwe_stream_add_event_rsl iwe_stream_add_event
-#endif
#define MAX_CUSTOM_LEN 64
static inline char *rtl819x_translate_scan(struct ieee80211_device *ieee,
iwe.cmd = SIOCGIWAP;
iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
memcpy(iwe.u.ap_addr.sa_data, network->bssid, ETH_ALEN);
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
start = iwe_stream_add_event_rsl(info, start, stop, &iwe, IW_EV_ADDR_LEN);
-#else
- start = iwe_stream_add_event_rsl(start, stop, &iwe, IW_EV_ADDR_LEN);
-#endif
/* Remaining entries will be displayed in the order we provide them */
/* Add the ESSID */
// if (network->flags & NETWORK_EMPTY_ESSID) {
if (network->ssid_len == 0) {
iwe.u.data.length = sizeof("<hidden>");
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
start = iwe_stream_add_point(info, start, stop, &iwe, "<hidden>");
-#else
- start = iwe_stream_add_point(start, stop, &iwe, "<hidden>");
-#endif
} else {
iwe.u.data.length = min(network->ssid_len, (u8)32);
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
start = iwe_stream_add_point(info, start, stop, &iwe, network->ssid);
-#else
- start = iwe_stream_add_point(start, stop, &iwe, network->ssid);
-#endif
}
/* Add the protocol name */
iwe.cmd = SIOCGIWNAME;
}
*pname = '\0';
snprintf(iwe.u.name, IFNAMSIZ, "IEEE802.11%s", proto_name);
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
start = iwe_stream_add_event_rsl(info, start, stop, &iwe, IW_EV_CHAR_LEN);
-#else
- start = iwe_stream_add_event_rsl(start, stop, &iwe, IW_EV_CHAR_LEN);
-#endif
/* Add mode */
iwe.cmd = SIOCGIWMODE;
if (network->capability &
iwe.u.mode = IW_MODE_MASTER;
else
iwe.u.mode = IW_MODE_ADHOC;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
start = iwe_stream_add_event_rsl(info, start, stop, &iwe, IW_EV_UINT_LEN);
-#else
- start = iwe_stream_add_event_rsl(start, stop, &iwe, IW_EV_UINT_LEN);
-#endif
}
/* Add frequency/channel */
iwe.u.freq.m = network->channel;
iwe.u.freq.e = 0;
iwe.u.freq.i = 0;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
start = iwe_stream_add_event_rsl(info, start, stop, &iwe, IW_EV_FREQ_LEN);
-#else
- start = iwe_stream_add_event_rsl(start, stop, &iwe, IW_EV_FREQ_LEN);
-#endif
/* Add encryption capability */
iwe.cmd = SIOCGIWENCODE;
if (network->capability & WLAN_CAPABILITY_PRIVACY)
else
iwe.u.data.flags = IW_ENCODE_DISABLED;
iwe.u.data.length = 0;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
start = iwe_stream_add_point(info, start, stop, &iwe, network->ssid);
-#else
- start = iwe_stream_add_point(start, stop, &iwe, network->ssid);
-#endif
/* Add basic and extended rates */
max_rate = 0;
p = custom;
if (rate > max_rate)
max_rate = rate;
}
-#if 0
- printk("max rate:%d ===basic rate:\n", max_rate);
- for (i=0;i<network->rates_len;i++)
- printk(" %x", network->rates[i]);
- printk("\n=======extend rate\n");
- for (i=0; i<network->rates_ex_len; i++)
- printk(" %x", network->rates_ex[i]);
- printk("\n");
-#endif
iwe.cmd = SIOCGIWRATE;
iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0;
iwe.u.bitrate.value = max_rate * 500000;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
start = iwe_stream_add_event_rsl(info, start, stop, &iwe,
IW_EV_PARAM_LEN);
-#else
- start = iwe_stream_add_event_rsl(start, stop, &iwe,
- IW_EV_PARAM_LEN);
-#endif
iwe.cmd = IWEVCUSTOM;
iwe.u.data.length = p - custom;
if (iwe.u.data.length)
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
start = iwe_stream_add_point(info, start, stop, &iwe, custom);
-#else
- start = iwe_stream_add_point(start, stop, &iwe, custom);
-#endif
/* Add quality statistics */
/* TODO: Fix these values... */
iwe.cmd = IWEVQUAL;
if (!(network->stats.mask & IEEE80211_STATMASK_SIGNAL))
iwe.u.qual.updated |= IW_QUAL_QUAL_INVALID;
iwe.u.qual.updated = 7;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
start = iwe_stream_add_event_rsl(info, start, stop, &iwe, IW_EV_QUAL_LEN);
-#else
- start = iwe_stream_add_event_rsl(start, stop, &iwe, IW_EV_QUAL_LEN);
-#endif
iwe.cmd = IWEVCUSTOM;
p = custom;
iwe.u.data.length = p - custom;
if (iwe.u.data.length)
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
start = iwe_stream_add_point(info, start, stop, &iwe, custom);
-#else
- start = iwe_stream_add_point(start, stop, &iwe, custom);
-#endif
#if (WIRELESS_EXT < 18)
if (ieee->wpa_enabled && network->wpa_ie_len){
char buf[MAX_WPA_IE_LEN * 2 + 30];
memset(&iwe, 0, sizeof(iwe));
iwe.cmd = IWEVCUSTOM;
iwe.u.data.length = strlen(buf);
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
start = iwe_stream_add_point(info, start, stop, &iwe, buf);
-#else
- start = iwe_stream_add_point(start, stop, &iwe, buf);
-#endif
}
if (ieee->wpa_enabled && network->rsn_ie_len){
memset(&iwe, 0, sizeof(iwe));
iwe.cmd = IWEVCUSTOM;
iwe.u.data.length = strlen(buf);
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
start = iwe_stream_add_point(info, start, stop, &iwe, buf);
-#else
- start = iwe_stream_add_point(start, stop, &iwe, buf);
-#endif
}
#else
memset(&iwe, 0, sizeof(iwe));
memcpy(buf, network->wpa_ie, network->wpa_ie_len);
iwe.cmd = IWEVGENIE;
iwe.u.data.length = network->wpa_ie_len;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
start = iwe_stream_add_point(info, start, stop, &iwe, buf);
-#else
- start = iwe_stream_add_point(start, stop, &iwe, buf);
-#endif
}
memset(&iwe, 0, sizeof(iwe));
if (network->rsn_ie_len)
memcpy(buf, network->rsn_ie, network->rsn_ie_len);
iwe.cmd = IWEVGENIE;
iwe.u.data.length = network->rsn_ie_len;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
start = iwe_stream_add_point(info, start, stop, &iwe, buf);
-#else
- start = iwe_stream_add_point(start, stop, &iwe, buf);
-#endif
}
#endif
" Last beacon: %lums ago", (jiffies - network->last_scanned) / (HZ / 100));
iwe.u.data.length = p - custom;
if (iwe.u.data.length)
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
start = iwe_stream_add_point(info, start, stop, &iwe, custom);
-#else
- start = iwe_stream_add_point(start, stop, &iwe, custom);
-#endif
return start;
}
request_module("ieee80211_crypt_wep");
new_crypt->ops = ieee80211_get_crypto_ops("WEP");
}
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
if (new_crypt->ops && try_module_get(new_crypt->ops->owner))
-#else
- if (new_crypt->ops && try_inc_mod_count(new_crypt->ops->owner))
-#endif
new_crypt->priv = new_crypt->ops->init(key);
if (!new_crypt->ops || !new_crypt->priv) {
erq->flags |= IW_ENCODE_DISABLED;
return 0;
}
-#if 0
- if (strcmp(crypt->ops->name, "WEP") != 0) {
- /* only WEP is supported with wireless extensions, so just
- * report that encryption is used */
- erq->length = 0;
- erq->flags |= IW_ENCODE_ENABLED;
- return 0;
- }
-#endif
len = crypt->ops->get_key(keybuf, SCM_KEY_LEN, NULL, crypt->priv);
erq->length = (len >= 0 ? len : 0);
union iwreq_data *wrqu, char *extra)
{
int ret = 0;
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
struct net_device *dev = ieee->dev;
struct iw_point *encoding = &wrqu->encoding;
struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
sec.enabled = 1;
// sec.encrypt = 1;
-#if 0
- if (group_key ? !ieee->host_mc_decrypt :
- !(ieee->host_encrypt || ieee->host_decrypt ||
- ieee->host_encrypt_msdu))
- goto skip_host_crypt;
-#endif
switch (ext->alg) {
case IW_ENCODE_ALG_WEP:
alg = "WEP";
ieee80211_crypt_delayed_deinit(ieee, crypt);
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,13))
new_crypt = kzalloc(sizeof(*new_crypt), GFP_KERNEL);
-#else
- new_crypt = kmalloc(sizeof(*new_crypt), GFP_KERNEL);
- memset(new_crypt,0,sizeof(*new_crypt));
-#endif
if (new_crypt == NULL) {
ret = -ENOMEM;
goto done;
ret = -EINVAL;
goto done;
}
-#if 1
//skip_host_crypt:
//printk("skip_host_crypt:ext_flags:%x\n", ext->ext_flags);
if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) {
if (group_key)
sec.flags &= ~SEC_LEVEL;
}
-#endif
done:
if (ieee->set_security)
ieee->set_security(ieee->dev, &sec);
IEEE80211_DEBUG_WX("%s: reset_port failed\n", dev->name);
return -EINVAL;
}
-#endif
return ret;
}
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
struct iw_mlme *mlme = (struct iw_mlme *) extra;
switch (mlme->cmd) {
case IW_MLME_DEAUTH:
default:
return -EOPNOTSUPP;
}
-#endif
return 0;
}
struct iw_request_info *info,
struct iw_param *data, char *extra)
{
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
switch (data->flags & IW_AUTH_INDEX) {
case IW_AUTH_WPA_VERSION:
/*need to support wpa2 here*/
//printk("open_wep:%d\n", ieee->open_wep);
break;
-#if 1
case IW_AUTH_WPA_ENABLED:
ieee->wpa_enabled = (data->value)?1:0;
//printk("enalbe wpa:%d\n", ieee->wpa_enabled);
break;
-#endif
case IW_AUTH_RX_UNENCRYPTED_EAPOL:
ieee->ieee802_1x = data->value;
break;
default:
return -EOPNOTSUPP;
}
-#endif
return 0;
}
#endif
-#if 1
int ieee80211_wx_set_gen_ie(struct ieee80211_device *ieee, u8 *ie, size_t len)
{
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
-#if 0
- printk("====>%s()\n", __FUNCTION__);
- {
- int i;
- for (i=0; i<len; i++)
- printk("%2x ", ie[i]&0xff);
- printk("\n");
- }
-#endif
u8 *buf;
if (len>MAX_WPA_IE_LEN || (len && ie == NULL))
ieee->wpa_ie = NULL;
ieee->wpa_ie_len = 0;
}
-#endif
return 0;
}
-#endif
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
EXPORT_SYMBOL(ieee80211_wx_set_gen_ie);
#if (WIRELESS_EXT >= 18)
EXPORT_SYMBOL(ieee80211_wx_set_mlme);
EXPORT_SYMBOL(ieee80211_wx_get_scan);
EXPORT_SYMBOL(ieee80211_wx_set_encode);
EXPORT_SYMBOL(ieee80211_wx_get_encode);
-#else
-EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_gen_ie);
-//EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_mlme);
-//EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_auth);
-//EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_encode_ext);
-EXPORT_SYMBOL_NOVERS(ieee80211_wx_get_scan);
-EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_encode);
-EXPORT_SYMBOL_NOVERS(ieee80211_wx_get_encode);
-#endif
#include <asm/softirq.h>
#include <asm/kmap_types.h>
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,20))
-#define list_for_each_entry(pos, head, member) \
- for (pos = list_entry((head)->next, typeof(*pos), member), \
- prefetch(pos->member.next); \
- &pos->member != (head); \
- pos = list_entry(pos->member.next, typeof(*pos), member), \
- prefetch(pos->member.next))
-
-static inline void cond_resched(void)
-{
- if (need_resched()) {
- set_current_state(TASK_RUNNING);
- schedule();
- }
-}
-#endif
extern enum km_type crypto_km_types[];
//return NULL;
}
-#if 0 //I try to merge ADDBA_REQ and ADDBA_RSP frames together..
-/********************************************************************************************************************
- *function: construct ADDBAREQ frame
- * input: u8* dst //ADDBARsp frame's destination
- * PBA_RECORD pBA //BA_RECORD entry which stores the necessary information for BA_RSP.
- * u16 StatusCode //status code.
- * output: none
- * return: sk_buff* skb //return constructed skb to xmit
-********************************************************************************************************************/
-static struct sk_buff* ieee80211_ADDBA_Rsp( IN struct ieee80211_device* ieee, u8* dst, PBA_RECORD pBA, u16 StatusCode)
-{
- OCTET_STRING osADDBAFrame, tmp;
-
- FillOctetString(osADDBAFrame, Buffer, 0);
- *pLength = 0;
-
- ConstructMaFrameHdr(
- Adapter,
- Addr,
- ACT_CAT_BA,
- ACT_ADDBARSP,
- &osADDBAFrame );
-
- // Dialog Token
- FillOctetString(tmp, &pBA->DialogToken, 1);
- PacketAppendData(&osADDBAFrame, tmp);
-
- // Status Code
- FillOctetString(tmp, &StatusCode, 2);
- PacketAppendData(&osADDBAFrame, tmp);
-
- // BA Parameter Set
- FillOctetString(tmp, &pBA->BaParamSet, 2);
- PacketAppendData(&osADDBAFrame, tmp);
-
- // BA Timeout Value
- FillOctetString(tmp, &pBA->BaTimeoutValue, 2);
- PacketAppendData(&osADDBAFrame, tmp);
-
- *pLength = osADDBAFrame.Length;
-}
-#endif
/********************************************************************************************************************
*function: construct DELBA frame
{
bool retValue = false;
struct ieee80211_network* net = &ieee->current_network;
-#if 0
- if(pMgntInfo->bHalfNMode == false)
- retValue = false;
- else
-#endif
if((memcmp(net->bssid, BELKINF5D8233V1_RALINK, 3)==0) ||
(memcmp(net->bssid, BELKINF5D82334V3_RALINK, 3)==0) ||
(memcmp(net->bssid, PCI_RALINK, 3)==0) ||
u8 HTIOTActIsDisableMCS14(struct ieee80211_device* ieee, u8* PeerMacAddr)
{
u8 ret = 0;
-#if 0
- // Apply for 819u only
-#if (HAL_CODE_BASE==RTL8192 && DEV_BUS_TYPE==USB_INTERFACE)
- if((memcmp(PeerMacAddr, UNKNOWN_BORADCOM, 3)==0) ||
- (memcmp(PeerMacAddr, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3)==0)
- )
- {
- ret = 1;
- }
-
-
- if(pHTInfo->bCurrentRT2RTAggregation)
- {
- // The parameter of pHTInfo->bCurrentRT2RTAggregation must be decided previously
- ret = 1;
- }
-#endif
-#endif
return ret;
}
#ifdef TODO
// Apply for 819u only
-//#if (HAL_CODE_BASE==RTL8192)
-
- //This rule only apply to Belkin(Ralink) AP
- if(IS_UNDER_11N_AES_MODE(Adapter))
- {
- if((PlatformCompareMemory(PeerMacAddr, BELKINF5D8233V1_RALINK, 3)==0) ||
- (PlatformCompareMemory(PeerMacAddr, PCI_RALINK, 3)==0) ||
- (PlatformCompareMemory(PeerMacAddr, EDIMAX_RALINK, 3)==0))
- {
- //Set True to disable this function. Disable by default, Emily, 2008.04.23
- retValue = false;
- }
- }
-
-//#endif
#endif
return retValue;
}
// Set specific EDCA parameter for different AP in DM handler.
return retValue;
-#if 0
- if((memcmp(PeerMacAddr, UNKNOWN_BORADCOM, 3)==0)||
- (memcmp(PeerMacAddr, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3)==0)||
- (memcmp(PeerMacAddr, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3)==0)||
- (memcmp(PeerMacAddr, NETGEAR834Bv2_BROADCOM, 3)==0))
-
- {
- retValue = 1; //Linksys disable EDCA turbo mode
- }
-
- return retValue;
-#endif
}
/********************************************************************************************************************
*len = 6 + 2;
return;
#ifdef TODO
-#if(HAL_CODE_BASE == RTL8192 && DEV_BUS_TYPE == USB_INTERFACE)
+#if (HAL_CODE_BASE == RTL8192 && DEV_BUS_TYPE == USB_INTERFACE)
/*
//Emily. If it is required to Ask Realtek AP to send AMPDU during AES mode, enable this
section of code.
return true;
}
void HTSetConnectBwMode(struct ieee80211_device* ieee, HT_CHANNEL_WIDTH Bandwidth, HT_EXTCHNL_OFFSET Offset);
-#if 0
-//I need move this function to other places, such as rx?
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
-void HTOnAssocRsp_wq(struct work_struct *work)
-{
- struct ieee80211_device *ieee = container_of(work, struct ieee80211_device, ht_onAssRsp);
-#else
-void HTOnAssocRsp_wq(struct ieee80211_device *ieee)
-{
-#endif
-#endif
void HTOnAssocRsp(struct ieee80211_device *ieee)
{
PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
{
// Set MPDU density to 2 to Realtek AP, and set it to 0 for others
// Replace MPDU factor declared in original association response frame format. 2007.08.20 by Emily
-#if 0
- osTmp= PacketGetElement( asocpdu, EID_Vendor, OUI_SUB_REALTEK_AGG, OUI_SUBTYPE_DONT_CARE);
- if(osTmp.Length >= 5) //00:e0:4c:02:00
-#endif
if (ieee->current_network.bssht.bdRT2RTAggregation)
{
if( ieee->pairwise_key_type != KEY_TYPE_NA)
// <2> Set AMPDU Minimum MPDU Start Spacing
// 802.11n 3.0 section 9.7d.3
-#if 1
if(pHTInfo->MPDU_Density > pPeerHTCap->MPDUDensity)
pHTInfo->CurrentMPDUDensity = pHTInfo->MPDU_Density;
else
pHTInfo->CurrentMPDUDensity = pPeerHTCap->MPDUDensity;
if(ieee->pairwise_key_type != KEY_TYPE_NA )
pHTInfo->CurrentMPDUDensity = 7; // 8us
-#else
- if(pHTInfo->MPDU_Density > pPeerHTCap->MPDUDensity)
- pHTInfo->CurrentMPDUDensity = pHTInfo->MPDU_Density;
- else
- pHTInfo->CurrentMPDUDensity = pPeerHTCap->MPDUDensity;
-#endif
// Force TX AMSDU
// Lanhsin: mark for tmp to avoid deauth by ap from s3
pBssHT->bdRT2RTAggregation = false;
pBssHT->bdRT2RTLongSlotTime = false;
}
-#if 0
-//below function has merged into ieee80211_network_init() in ieee80211_rx.c
-void
-HTParsingHTCapElement(
- IN PADAPTER Adapter,
- IN OCTET_STRING HTCapIE,
- OUT PRT_WLAN_BSS pBssDesc
-)
-{
- PMGNT_INFO pMgntInfo = &Adapter->MgntInfo;
-
- if( HTCapIE.Length > sizeof(pBssDesc->BssHT.bdHTCapBuf) )
- {
- RT_TRACE( COMP_HT, DBG_LOUD, ("HTParsingHTCapElement(): HT Capability Element length is too long!\n") );
- return;
- }
-
- // TODO: Check the correctness of HT Cap
- //Print each field in detail. Driver should not print out this message by default
- if(!pMgntInfo->mActingAsAp && !pMgntInfo->mAssoc)
- HTDebugHTCapability(DBG_TRACE, Adapter, &HTCapIE, (pu8)"HTParsingHTCapElement()");
-
- HTCapIE.Length = HTCapIE.Length > sizeof(pBssDesc->BssHT.bdHTCapBuf)?\
- sizeof(pBssDesc->BssHT.bdHTCapBuf):HTCapIE.Length; //prevent from overflow
-
- CopyMem(pBssDesc->BssHT.bdHTCapBuf, HTCapIE.Octet, HTCapIE.Length);
- pBssDesc->BssHT.bdHTCapLen = HTCapIE.Length;
-
-}
-
-
-void
-HTParsingHTInfoElement(
- PADAPTER Adapter,
- OCTET_STRING HTInfoIE,
- PRT_WLAN_BSS pBssDesc
-)
-{
- PMGNT_INFO pMgntInfo = &Adapter->MgntInfo;
-
- if( HTInfoIE.Length > sizeof(pBssDesc->BssHT.bdHTInfoBuf))
- {
- RT_TRACE( COMP_HT, DBG_LOUD, ("HTParsingHTInfoElement(): HT Information Element length is too long!\n") );
- return;
- }
-
- // TODO: Check the correctness of HT Info
- //Print each field in detail. Driver should not print out this message by default
- if(!pMgntInfo->mActingAsAp && !pMgntInfo->mAssoc)
- HTDebugHTInfo(DBG_TRACE, Adapter, &HTInfoIE, (pu8)"HTParsingHTInfoElement()");
-
- HTInfoIE.Length = HTInfoIE.Length > sizeof(pBssDesc->BssHT.bdHTInfoBuf)?\
- sizeof(pBssDesc->BssHT.bdHTInfoBuf):HTInfoIE.Length; //prevent from overflow
-
- CopyMem( pBssDesc->BssHT.bdHTInfoBuf, HTInfoIE.Octet, HTInfoIE.Length);
- pBssDesc->BssHT.bdHTInfoLen = HTInfoIE.Length;
-}
-
-/*
- * Get HT related information from beacon and save it in BssDesc
- *
- * (1) Parse HTCap, and HTInfo, and record whether it is 11n AP
- * (2) If peer is HT, but not WMM, call QosSetLegacyWMMParamWithHT()
- * (3) Check whether peer is Realtek AP (for Realtek proprietary aggregation mode).
- * Input:
- * PADAPTER Adapter
- *
- * Output:
- * PRT_TCB BssDesc
- *
-*/
-void HTGetValueFromBeaconOrProbeRsp(
- PADAPTER Adapter,
- POCTET_STRING pSRCmmpdu,
- PRT_WLAN_BSS bssDesc
-)
-{
- PMGNT_INFO pMgntInfo = &Adapter->MgntInfo;
- PRT_HIGH_THROUGHPUT pHTInfo = GET_HT_INFO(pMgntInfo);
- OCTET_STRING HTCapIE, HTInfoIE, HTRealtekAgg, mmpdu;
- OCTET_STRING BroadcomElement, CiscoElement;
-
- mmpdu.Octet = pSRCmmpdu->Octet;
- mmpdu.Length = pSRCmmpdu->Length;
-
- //2Note:
- // Mark for IOT testing using Linksys WRT350N, This AP does not contain WMM IE when
- // it is configured at pure-N mode.
- // if(bssDesc->BssQos.bdQoSMode & QOS_WMM)
- //
-
- HTInitializeBssDesc (&bssDesc->BssHT);
-
- //2<1> Parse HTCap, and HTInfo
- // Get HT Capability IE: (1) Get IEEE Draft N IE or (2) Get EWC IE
- HTCapIE = PacketGetElement(mmpdu, EID_HTCapability, OUI_SUB_DONT_CARE, OUI_SUBTYPE_DONT_CARE);
- if(HTCapIE.Length == 0)
- {
- HTCapIE = PacketGetElement(mmpdu, EID_Vendor, OUI_SUB_11N_EWC_HT_CAP, OUI_SUBTYPE_DONT_CARE);
- if(HTCapIE.Length != 0)
- bssDesc->BssHT.bdHTSpecVer= HT_SPEC_VER_EWC;
- }
- if(HTCapIE.Length != 0)
- HTParsingHTCapElement(Adapter, HTCapIE, bssDesc);
-
- // Get HT Information IE: (1) Get IEEE Draft N IE or (2) Get EWC IE
- HTInfoIE = PacketGetElement(mmpdu, EID_HTInfo, OUI_SUB_DONT_CARE, OUI_SUBTYPE_DONT_CARE);
- if(HTInfoIE.Length == 0)
- {
- HTInfoIE = PacketGetElement(mmpdu, EID_Vendor, OUI_SUB_11N_EWC_HT_INFO, OUI_SUBTYPE_DONT_CARE);
- if(HTInfoIE.Length != 0)
- bssDesc->BssHT.bdHTSpecVer = HT_SPEC_VER_EWC;
- }
- if(HTInfoIE.Length != 0)
- HTParsingHTInfoElement(Adapter, HTInfoIE, bssDesc);
-
- //2<2>If peer is HT, but not WMM, call QosSetLegacyWMMParamWithHT()
- if(HTCapIE.Length != 0)
- {
- bssDesc->BssHT.bdSupportHT = true;
- if(bssDesc->BssQos.bdQoSMode == QOS_DISABLE)
- QosSetLegacyWMMParamWithHT(Adapter, bssDesc);
- }
- else
- {
- bssDesc->BssHT.bdSupportHT = false;
- }
-
- //2<3>Check whether the peer is Realtek AP/STA
- if(pHTInfo->bRegRT2RTAggregation)
- {
- if(bssDesc->BssHT.bdSupportHT)
- {
- HTRealtekAgg = PacketGetElement(mmpdu, EID_Vendor, OUI_SUB_REALTEK_AGG, OUI_SUBTYPE_DONT_CARE);
- if(HTRealtekAgg.Length >=5 )
- {
- bssDesc->BssHT.bdRT2RTAggregation = true;
-
- if((HTRealtekAgg.Octet[4]==1) && (HTRealtekAgg.Octet[5] & 0x02))
- bssDesc->BssHT.bdRT2RTLongSlotTime = true;
- }
- }
- }
-
- //
- // 2008/01/25 MH Get Broadcom AP IE for manamgent frame CCK rate problem.
- // AP can not receive CCK managemtn from from 92E.
- //
-
- // Initialize every new bss broadcom cap exist as false..
- bssDesc->bBroadcomCapExist= false;
-
- if(HTCapIE.Length != 0 || HTInfoIE.Length != 0)
- {
- u4Byte Length = 0;
-
- FillOctetString(BroadcomElement, NULL, 0);
-
- BroadcomElement = PacketGetElement( mmpdu, EID_Vendor, OUI_SUB_BROADCOM_IE_1, OUI_SUBTYPE_DONT_CARE);
- Length += BroadcomElement.Length;
- BroadcomElement = PacketGetElement( mmpdu, EID_Vendor, OUI_SUB_BROADCOM_IE_2, OUI_SUBTYPE_DONT_CARE);
- Length += BroadcomElement.Length;
- BroadcomElement = PacketGetElement( mmpdu, EID_Vendor, OUI_SUB_BROADCOM_IE_3, OUI_SUBTYPE_DONT_CARE);
- Length += BroadcomElement.Length;
-
- if(Length > 0)
- bssDesc->bBroadcomCapExist = true;
- }
-
-
- // For Cisco IOT issue
- CiscoElement = PacketGetElement( mmpdu, EID_Vendor, OUI_SUB_CISCO_IE, OUI_SUBTYPE_DONT_CARE);
- if(CiscoElement.Length != 0){ // 3: 0x00, 0x40, 0x96 ....
- bssDesc->bCiscoCapExist = true;
- }else{
- bssDesc->bCiscoCapExist = false;
- }
-}
-
-
-#endif
/********************************************************************************************************************
*function: initialize Bss HT structure(struct PBSS_HT)
* input: struct ieee80211_device *ieee
pHTInfo->bSwBwInProgress = false;
}
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-EXPORT_SYMBOL_NOVERS(HTUpdateSelfAndPeerSetting);
-#else
EXPORT_SYMBOL(HTUpdateSelfAndPeerSetting);
-#endif
}ACK_POLICY,*PACK_POLICY;
#define WMM_PARAM_ELEMENT_SIZE (8+(4*AC_PARAM_SIZE))
-#if 0
-#define GET_QOS_CTRL(_pStart) ReadEF2Byte((u8 *)(_pStart) + 24)
-#define SET_QOS_CTRL(_pStart, _value) WriteEF2Byte((u8 *)(_pStart) + 24, _value)
-
-// WMM control field.
-#define GET_QOS_CTRL_WMM_UP(_pStart) ((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 0, 3))
-#define SET_QOS_CTRL_WMM_UP(_pStart, _value) SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 0, 3, (u8)(_value))
-
-#define GET_QOS_CTRL_WMM_EOSP(_pStart) ((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 4, 1))
-#define SET_QOS_CTRL_WMM_EOSP(_pStart, _value) SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 4, 1, (u8)(_value))
-
-#define GET_QOS_CTRL_WMM_ACK_POLICY(_pStart) ((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 5, 2))
-#define SET_QOS_CTRL_WMM_ACK_POLICY(_pStart, _value) SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 5, 2, (u8)(_value))
-
-// 802.11e control field (by STA, data)
-#define GET_QOS_CTRL_STA_DATA_TID(_pStart) ((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 0, 4))
-#define SET_QOS_CTRL_STA_DATA_TID(_pStart, _value) SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 0, 4, (u8)(_value))
-
-#define GET_QOS_CTRL_STA_DATA_QSIZE_FLAG(_pStart) ((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 4, 1))
-#define SET_QOS_CTRL_STA_DATA_QSIZE_FLAG(_pStart, _value) SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 4, 1, (u8)(_value))
-
-#define GET_QOS_CTRL_STA_DATA_ACK_POLICY(_pStart) ((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 5, 2))
-#define SET_QOS_CTRL_STA_DATA_ACK_POLICY(_pStart, _value) SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 5, 2, (u8)(_value))
-
-#define GET_QOS_CTRL_STA_DATA_TXOP(_pStart) ((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 8, 8))
-#define SET_QOS_CTRL_STA_DATA_TXOP(_pStart, _value) SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 8, 8, (u8)(_value))
-
-#define GET_QOS_CTRL_STA_DATA_QSIZE(_pStart) GET_QOS_CTRL_STA_DATA_TXOP(_pStart)
-#define SET_QOS_CTRL_STA_DATA_QSIZE(_pStart, _value) SET_QOS_CTRL_STA_DATA_TXOP(_pStart)
-
-// 802.11e control field (by HC, data)
-#define GET_QOS_CTRL_HC_DATA_TID(_pStart) ((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 0, 4))
-#define SET_QOS_CTRL_HC_DATA_TID(_pStart, _value) SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 0, 4, (u8)(_value))
-
-#define GET_QOS_CTRL_HC_DATA_EOSP(_pStart) ((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 4, 1))
-#define SET_QOS_CTRL_HC_DATA_EOSP(_pStart, _value) SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 4, 1, (u8)(_value))
-
-#define GET_QOS_CTRL_HC_DATA_ACK_POLICY(_pStart) ((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 5, 2))
-#define SET_QOS_CTRL_HC_DATA_ACK_POLICY(_pStart, _value) SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 5, 2, (u8)(_value))
-
-#define GET_QOS_CTRL_HC_DATA_PS_BUFSTATE(_pStart) ((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 8, 8))
-#define SET_QOS_CTRL_HC_DATA_PS_BUFSTATE(_pStart, _value) SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 8, 8, (u8)(_value))
-
-// 802.11e control field (by HC, CFP)
-#define GET_QOS_CTRL_HC_CFP_TID(_pStart) ((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 0, 4))
-#define SET_QOS_CTRL_HC_CFP_TID(_pStart, _value) SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 0, 4, (u8)(_value))
-
-#define GET_QOS_CTRL_HC_CFP_EOSP(_pStart) ((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 4, 1))
-#define SET_QOS_CTRL_HC_CFP_EOSP(_pStart, _value) SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 4, 1, (u8)(_value))
-
-#define GET_QOS_CTRL_HC_CFP_ACK_POLICY(_pStart) ((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 5, 2))
-#define SET_QOS_CTRL_HC_CFP_ACK_POLICY(_pStart, _value) SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 5, 2, (u8)(_value))
-
-#define GET_QOS_CTRL_HC_CFP_TXOP_LIMIT(_pStart) ((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 8, 8))
-#define SET_QOS_CTRL_HC_CFP_TXOP_LIMIT(_pStart, _value) SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 8, 8, (u8)(_value))
-
-#define SET_WMM_QOS_INFO_FIELD(_pStart, _val) WriteEF1Byte(_pStart, _val)
-
-#define GET_WMM_QOS_INFO_FIELD_PARAMETERSET_COUNT(_pStart) LE_BITS_TO_1BYTE(_pStart, 0, 4)
-#define SET_WMM_QOS_INFO_FIELD_PARAMETERSET_COUNT(_pStart, _val) SET_BITS_TO_LE_1BYTE(_pStart, 0, 4, _val)
-
-#define GET_WMM_QOS_INFO_FIELD_AP_UAPSD(_pStart) LE_BITS_TO_1BYTE(_pStart, 7, 1)
-#define SET_WMM_QOS_INFO_FIELD_AP_UAPSD(_pStart, _val) SET_BITS_TO_LE_1BYTE(_pStart, 7, 1, _val)
-
-#define GET_WMM_QOS_INFO_FIELD_STA_AC_VO_UAPSD(_pStart) LE_BITS_TO_1BYTE(_pStart, 0, 1)
-#define SET_WMM_QOS_INFO_FIELD_STA_AC_VO_UAPSD(_pStart, _val) SET_BITS_TO_LE_1BYTE(_pStart, 0, 1, _val)
-
-#define GET_WMM_QOS_INFO_FIELD_STA_AC_VI_UAPSD(_pStart) LE_BITS_TO_1BYTE(_pStart, 1, 1)
-#define SET_WMM_QOS_INFO_FIELD_STA_AC_VI_UAPSD(_pStart, _val) SET_BITS_TO_LE_1BYTE(_pStart, 1, 1, _val)
-
-#define GET_WMM_QOS_INFO_FIELD_STA_AC_BE_UAPSD(_pStart) LE_BITS_TO_1BYTE(_pStart, 2, 1)
-#define SET_WMM_QOS_INFO_FIELD_STA_AC_BE_UAPSD(_pStart, _val) SET_BITS_TO_LE_1BYTE(_pStart, 2, 1, _val)
-
-#define GET_WMM_QOS_INFO_FIELD_STA_AC_BK_UAPSD(_pStart) LE_BITS_TO_1BYTE(_pStart, 3, 1)
-#define SET_WMM_QOS_INFO_FIELD_STA_AC_BK_UAPSD(_pStart, _val) SET_BITS_TO_LE_1BYTE(_pStart, 3, 1, _val)
-
-#define GET_WMM_QOS_INFO_FIELD_STA_MAX_SP_LEN(_pStart) LE_BITS_TO_1BYTE(_pStart, 5, 2)
-#define SET_WMM_QOS_INFO_FIELD_STA_MAX_SP_LEN(_pStart, _val) SET_BITS_TO_LE_1BYTE(_pStart, 5, 2, _val)
-
-
-#define WMM_INFO_ELEMENT_SIZE 7
-
-#define GET_WMM_INFO_ELE_OUI(_pStart) ((u8 *)(_pStart))
-#define SET_WMM_INFO_ELE_OUI(_pStart, _pVal) PlatformMoveMemory(_pStart, _pVal, 3);
-
-#define GET_WMM_INFO_ELE_OUI_TYPE(_pStart) ( EF1Byte( *((u8 *)(_pStart)+3) ) )
-#define SET_WMM_INFO_ELE_OUI_TYPE(_pStart, _val) ( *((u8 *)(_pStart)+3) = EF1Byte(_val) )
-
-#define GET_WMM_INFO_ELE_OUI_SUBTYPE(_pStart) ( EF1Byte( *((u8 *)(_pStart)+4) ) )
-#define SET_WMM_INFO_ELE_OUI_SUBTYPE(_pStart, _val) ( *((u8 *)(_pStart)+4) = EF1Byte(_val) )
-
-#define GET_WMM_INFO_ELE_VERSION(_pStart) ( EF1Byte( *((u8 *)(_pStart)+5) ) )
-#define SET_WMM_INFO_ELE_VERSION(_pStart, _val) ( *((u8 *)(_pStart)+5) = EF1Byte(_val) )
-
-#define GET_WMM_INFO_ELE_QOS_INFO_FIELD(_pStart) ( EF1Byte( *((u8 *)(_pStart)+6) ) )
-#define SET_WMM_INFO_ELE_QOS_INFO_FIELD(_pStart, _val) ( *((u8 *)(_pStart)+6) = EF1Byte(_val) )
-
-
-
-#define GET_WMM_AC_PARAM_AIFSN(_pStart) ( (u8)LE_BITS_TO_4BYTE(_pStart, 0, 4) )
-#define SET_WMM_AC_PARAM_AIFSN(_pStart, _val) SET_BITS_TO_LE_4BYTE(_pStart, 0, 4, _val)
-
-#define GET_WMM_AC_PARAM_ACM(_pStart) ( (u8)LE_BITS_TO_4BYTE(_pStart, 4, 1) )
-#define SET_WMM_AC_PARAM_ACM(_pStart, _val) SET_BITS_TO_LE_4BYTE(_pStart, 4, 1, _val)
-
-#define GET_WMM_AC_PARAM_ACI(_pStart) ( (u8)LE_BITS_TO_4BYTE(_pStart, 5, 2) )
-#define SET_WMM_AC_PARAM_ACI(_pStart, _val) SET_BITS_TO_LE_4BYTE(_pStart, 5, 2, _val)
-
-#define GET_WMM_AC_PARAM_ACI_AIFSN(_pStart) ( (u8)LE_BITS_TO_4BYTE(_pStart, 0, 8) )
-#define SET_WMM_AC_PARAM_ACI_AIFSN(_pStart, _val) SET_BTIS_TO_LE_4BYTE(_pStart, 0, 8, _val)
-
-#define GET_WMM_AC_PARAM_ECWMIN(_pStart) ( (u8)LE_BITS_TO_4BYTE(_pStart, 8, 4) )
-#define SET_WMM_AC_PARAM_ECWMIN(_pStart, _val) SET_BITS_TO_LE_4BYTE(_pStart, 8, 4, _val)
-
-#define GET_WMM_AC_PARAM_ECWMAX(_pStart) ( (u8)LE_BITS_TO_4BYTE(_pStart, 12, 4) )
-#define SET_WMM_AC_PARAM_ECWMAX(_pStart, _val) SET_BITS_TO_LE_4BYTE(_pStart, 12, 4, _val)
-
-#define GET_WMM_AC_PARAM_TXOP_LIMIT(_pStart) ( (u16)LE_BITS_TO_4BYTE(_pStart, 16, 16) )
-#define SET_WMM_AC_PARAM_TXOP_LIMIT(_pStart, _val) SET_BITS_TO_LE_4BYTE(_pStart, 16, 16, _val)
-
-
-
-
-#define GET_WMM_PARAM_ELE_OUI(_pStart) ((u8 *)(_pStart))
-#define SET_WMM_PARAM_ELE_OUI(_pStart, _pVal) PlatformMoveMemory(_pStart, _pVal, 3)
-
-#define GET_WMM_PARAM_ELE_OUI_TYPE(_pStart) ( EF1Byte( *((u8 *)(_pStart)+3) ) )
-#define SET_WMM_PARAM_ELE_OUI_TYPE(_pStart, _val) ( *((u8 *)(_pStart)+3) = EF1Byte(_val) )
-
-#define GET_WMM_PARAM_ELE_OUI_SUBTYPE(_pStart) ( EF1Byte( *((u8 *)(_pStart)+4) ) )
-#define SET_WMM_PARAM_ELE_OUI_SUBTYPE(_pStart, _val) ( *((u8 *)(_pStart)+4) = EF1Byte(_val) )
-
-#define GET_WMM_PARAM_ELE_VERSION(_pStart) ( EF1Byte( *((u8 *)(_pStart)+5) ) )
-#define SET_WMM_PARAM_ELE_VERSION(_pStart, _val) ( *((u8 *)(_pStart)+5) = EF1Byte(_val) )
-
-#define GET_WMM_PARAM_ELE_QOS_INFO_FIELD(_pStart) ( EF1Byte( *((u8 *)(_pStart)+6) ) )
-#define SET_WMM_PARAM_ELE_QOS_INFO_FIELD(_pStart, _val) ( *((u8 *)(_pStart)+6) = EF1Byte(_val) )
-
-#define GET_WMM_PARAM_ELE_AC_PARAM(_pStart) ( (u8 *)(_pStart)+8 )
-#define SET_WMM_PARAM_ELE_AC_PARAM(_pStart, _pVal) PlatformMoveMemory((_pStart)+8, _pVal, 16)
-#endif
//
// QoS Control Field
}QOS_INFO_FIELD, *PQOS_INFO_FIELD;
-#if 0
-//
-// WMM Information Element
-// Ref: WMM spec 2.2.1: WME Information Element, p.10.
-//
-typedef struct _WMM_INFO_ELEMENT{
-// u8 ElementID;
-// u8 Length;
- u8 OUI[3];
- u8 OUI_Type;
- u8 OUI_SubType;
- u8 Version;
- QOS_INFO_FIELD QosInfo;
-}WMM_INFO_ELEMENT, *PWMM_INFO_ELEMENT;
-#endif
//
// ACI to AC coding.
u8 *Octet;
u16 Length;
}OCTET_STRING, *POCTET_STRING;
-#if 0
-#define FillOctetString(_os,_octet,_len) \
- (_os).Octet=(u8 *)(_octet); \
- (_os).Length=(_len);
-
-#define WMM_ELEM_HDR_LEN 6
-#define WMMElemSkipHdr(_osWMMElem) \
- (_osWMMElem).Octet += WMM_ELEM_HDR_LEN; \
- (_osWMMElem).Length -= WMM_ELEM_HDR_LEN;
-#endif
//
// STA QoS data.
// Ref: DOT11_QOS in 8185 code. [def. in QoS_mp.h]
#include <linux/etherdevice.h>
#include "rtl819x_TS.h"
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-#define list_for_each_entry_safe(pos, n, head, member) \
- for (pos = list_entry((head)->next, typeof(*pos), member), \
- n = list_entry(pos->member.next, typeof(*pos), member); \
- &pos->member != (head); \
- pos = n, n = list_entry(n->member.next, typeof(*n), member))
-#endif
void TsSetupTimeOut(unsigned long data)
{
// Not implement yet
* return: NULL
* notice:
********************************************************************************************************************/
-#if 1
void RxPktPendingTimeout(unsigned long data)
{
PRX_TS_RECORD pRxTs = (PRX_TS_RECORD)data;
spin_unlock_irqrestore(&(ieee->reorder_spinlock), flags);
//PlatformReleaseSpinLock(Adapter, RT_RX_SPINLOCK);
}
-#endif
/********************************************************************************************************************
*function: Add BA timer function
IEEE80211_DEBUG(IEEE80211_DL_ERR, "get TS for Broadcast or Multicast\n");
return false;
}
-#if 0
- if(ieee->pStaQos->CurrentQosMode == QOS_DISABLE)
- { UP = 0; } //only use one TS
- else if(ieee->pStaQos->CurrentQosMode & QOS_WMM)
- {
-#else
if (ieee->current_network.qos_data.supported == 0)
UP = 0;
else
{
-#endif
// In WMM case: we use 4 TID only
if (!IsACValid(TID))
{
{
PTS_COMMON_INFO pTS, pTmpTS;
printk("===========>RemovePeerTS,"MAC_FMT"\n", MAC_ARG(Addr));
-#if 1
list_for_each_entry_safe(pTS, pTmpTS, &ieee->Tx_TS_Pending_List, List)
{
if (memcmp(pTS->Addr, Addr, 6) == 0)
list_add_tail(&pTS->List, &ieee->Rx_TS_Unused_List);
}
}
-#endif
}
void RemoveAllTS(struct ieee80211_device* ieee)
{
PTS_COMMON_INFO pTS, pTmpTS;
-#if 1
list_for_each_entry_safe(pTS, pTmpTS, &ieee->Tx_TS_Pending_List, List)
{
RemoveTsEntry(ieee, pTS, TX_DIR);
list_del_init(&pTS->List);
list_add_tail(&pTS->List, &ieee->Rx_TS_Unused_List);
}
-#endif
}
void TsStartAddBaProcess(struct ieee80211_device* ieee, PTX_TS_RECORD pTxTS)
if(pTxTS->bAddBaReqInProgress == false)
{
pTxTS->bAddBaReqInProgress = true;
-#if 1
if(pTxTS->bAddBaReqDelayed)
{
IEEE80211_DEBUG(IEEE80211_DL_BA, "TsStartAddBaProcess(): Delayed Start ADDBA after 60 sec!!\n");
IEEE80211_DEBUG(IEEE80211_DL_BA,"TsStartAddBaProcess(): Immediately Start ADDBA now!!\n");
mod_timer(&pTxTS->TsAddBaTimer, jiffies+10); //set 10 ticks
}
-#endif
}
else
IEEE80211_DEBUG(IEEE80211_DL_ERR, "%s()==>BA timer is already added\n", __FUNCTION__);
}
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-EXPORT_SYMBOL_NOVERS(RemovePeerTS);
-#else
EXPORT_SYMBOL(RemovePeerTS);
-#endif
#include <linux/random.h>
#include <linux/version.h>
#include <asm/io.h>
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,27))
-#include <asm/semaphore.h>
-#endif
#include "ieee80211.h"
#define RTL8192U
// Rx smooth factor
#define Rx_Smooth_Factor 20
-#if 0 //we need to use RT_TRACE instead DMESG as RT_TRACE will clearly show debug level wb.
-#define DMESG(x,a...) printk(KERN_INFO RTL819xU_MODULE_NAME ": " x "\n", ## a)
-#define DMESGW(x,a...) printk(KERN_WARNING RTL819xU_MODULE_NAME ": WW:" x "\n", ## a)
-#define DMESGE(x,a...) printk(KERN_WARNING RTL819xU_MODULE_NAME ": EE:" x "\n", ## a)
-#else
#define DMESG(x,a...)
#define DMESGW(x,a...)
#define DMESGE(x,a...)
#define COMP_DOWN BIT29 //for rm driver module
#define COMP_RESET BIT30 //for silent reset
#define COMP_ERR BIT31 //for error out, always on
-#endif
#define RTL819x_DEBUG
#ifdef RTL819x_DEBUG
-#if 0
-
-typedef struct tx_pendingbuf
-{
- struct ieee80211_txb *txb;
- short ispending;
- short descfrag;
-} tx_pendigbuf;
-
-#endif
typedef struct _rt_9x_tx_rate_history {
u32 cck[4];
spinlock_t irq_lock;
// spinlock_t irq_th_lock;
spinlock_t tx_lock;
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,16))
- struct semaphore mutex;
-#else
struct mutex mutex;
-#endif
//spinlock_t rf_lock; //used to lock rf write operation added by wb
u16 irq_mask;
/* modified by davad for Rx process */
struct sk_buff_head rx_queue;
struct sk_buff_head skb_queue;
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
- struct tq_struct qos_activate;
-#else
struct work_struct qos_activate;
-#endif
short tx_urb_index;
atomic_t tx_pending[0x10];//UART_PRIORITY+1
u16 rts;
struct ChnlAccessSetting ChannelAccessSetting;
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
struct work_struct reset_wq;
-#else
- struct tq_struct reset_wq;
-#endif
/**********************************************************/
//for rtl819xUsb
u16 SifsTime;
//define work item by amy 080526
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
struct delayed_work update_beacon_wq;
struct delayed_work watch_dog_wq;
struct delayed_work txpower_tracking_wq;
struct delayed_work rfpath_check_wq;
struct delayed_work gpio_change_rf_wq;
struct delayed_work initialgain_operate_wq;
-#else
- struct work_struct update_beacon_wq;
- struct work_struct watch_dog_wq;
- struct work_struct txpower_tracking_wq;
- struct work_struct rfpath_check_wq;
- struct work_struct gpio_change_rf_wq;
- struct work_struct initialgain_operate_wq;
-#endif
struct workqueue_struct *priv_wq;
-#else
- /* used for periodly scan */
- struct tq_struct update_beacon_wq;
- struct tq_struct txpower_tracking_wq;
- struct tq_struct rfpath_check_wq;
- struct tq_struct watch_dog_wq;
- struct tq_struct gpio_change_rf_wq;
- struct tq_struct initialgain_operate_wq;
-#endif
}r8192_priv;
// for rtl8187
} nic_t;
-#if 0 //defined in Qos.h
-//typedef u32 AC_CODING;
-#define AC0_BE 0 // ACI: 0x00 // Best Effort
-#define AC1_BK 1 // ACI: 0x01 // Background
-#define AC2_VI 2 // ACI: 0x10 // Video
-#define AC3_VO 3 // ACI: 0x11 // Voice
-#define AC_MAX 4 // Max: define total number; Should not to be used as a real enum.
-
-//
-// ECWmin/ECWmax field.
-// Ref: WMM spec 2.2.2: WME Parameter Element, p.13.
-//
-typedef union _ECW{
- u8 charData;
- struct
- {
- u8 ECWmin:4;
- u8 ECWmax:4;
- }f; // Field
-}ECW, *PECW;
-
-//
-// ACI/AIFSN Field.
-// Ref: WMM spec 2.2.2: WME Parameter Element, p.12.
-//
-typedef union _ACI_AIFSN{
- u8 charData;
-
- struct
- {
- u8 AIFSN:4;
- u8 ACM:1;
- u8 ACI:2;
- u8 Reserved:1;
- }f; // Field
-}ACI_AIFSN, *PACI_AIFSN;
-
-//
-// AC Parameters Record Format.
-// Ref: WMM spec 2.2.2: WME Parameter Element, p.12.
-//
-typedef union _AC_PARAM{
- u32 longData;
- u8 charData[4];
-
- struct
- {
- ACI_AIFSN AciAifsn;
- ECW Ecw;
- u16 TXOPLimit;
- }f; // Field
-}AC_PARAM, *PAC_PARAM;
-
-#endif
#ifdef JOHN_HWSEC
struct ssid_thread {
struct net_device *dev;
//#include "r8192xU_phyreg.h"
#include <linux/usb.h>
// FIXME: check if 2.6.7 is ok
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,7))
-#define usb_kill_urb usb_unlink_urb
-#endif
#ifdef CONFIG_RTL8192_PM
#include "r8192_pm.h"
};
MODULE_LICENSE("GPL");
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
MODULE_VERSION("V 1.1");
-#endif
MODULE_DEVICE_TABLE(usb, rtl8192_usb_id_tbl);
MODULE_DESCRIPTION("Linux driver for Realtek RTL8192 USB WiFi cards");
static char* ifname = "wlan%d";
-#if 0
-static int hwseqnum = 0;
-static int hwwep = 0;
-#endif
static int hwwep = 1; //default use hw. set 0 to use software security
static int channels = 0x3fff;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 9)
module_param(ifname, charp, S_IRUGO|S_IWUSR );
//module_param(hwseqnum,int, S_IRUGO|S_IWUSR);
module_param(hwwep,int, S_IRUGO|S_IWUSR);
module_param(channels,int, S_IRUGO|S_IWUSR);
-#else
-MODULE_PARM(ifname, "s");
-//MODULE_PARM(hwseqnum,"i");
-MODULE_PARM(hwwep,"i");
-MODULE_PARM(channels,"i");
-#endif
MODULE_PARM_DESC(ifname," Net interface name, wlan%d=default");
//MODULE_PARM_DESC(hwseqnum," Try to use hardware 802.11 header sequence numbers. Zero=default");
MODULE_PARM_DESC(hwwep," Try to use hardware security support. ");
MODULE_PARM_DESC(channels," Channel bitmask for specific locales. NYI");
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
static int __devinit rtl8192_usb_probe(struct usb_interface *intf,
const struct usb_device_id *id);
static void __devexit rtl8192_usb_disconnect(struct usb_interface *intf);
-#else
-static void *__devinit rtl8192_usb_probe(struct usb_device *udev,unsigned int ifnum,
- const struct usb_device_id *id);
-static void __devexit rtl8192_usb_disconnect(struct usb_device *udev, void *ptr);
-#endif
static struct usb_driver rtl8192_usb_driver = {
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 15)
- .owner = THIS_MODULE,
-#endif
.name = RTL819xU_MODULE_NAME, /* Driver name */
.id_table = rtl8192_usb_id_tbl, /* PCI_ID table */
.probe = rtl8192_usb_probe, /* probe fn */
.disconnect = rtl8192_usb_disconnect, /* remove fn */
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0)
#ifdef CONFIG_RTL8192_PM
.suspend = rtl8192_suspend, /* PM suspend fn */
.resume = rtl8192_resume, /* PM resume fn */
.suspend = NULL, /* PM suspend fn */
.resume = NULL, /* PM resume fn */
#endif
-#endif
};
#ifdef ENABLE_DOT11D
void CamResetAllEntry(struct net_device *dev)
{
-#if 1
u32 ulcommand = 0;
//2004/02/11 In static WEP, OID_ADD_KEY or OID_ADD_WEP are set before STA associate to AP.
// However, ResetKey is called on OID_802_11_INFRASTRUCTURE_MODE and MlmeAssociateRequest
//DbgPrint("========================================\n\n");
ulcommand |= BIT31|BIT30;
write_nic_dword(dev, RWCAM, ulcommand);
-#else
- for(ucIndex=0;ucIndex<TOTAL_CAM_ENTRY;ucIndex++)
- CAM_mark_invalid(dev, ucIndex);
- for(ucIndex=0;ucIndex<TOTAL_CAM_ENTRY;ucIndex++)
- CAM_empty_entry(dev, ucIndex);
-#endif
}
static struct net_device_stats *rtl8192_stats(struct net_device *dev);
void rtl8192_commit(struct net_device *dev);
//void rtl8192_restart(struct net_device *dev);
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
void rtl8192_restart(struct work_struct *work);
//void rtl8192_rq_tx_ack(struct work_struct *work);
-#else
- void rtl8192_restart(struct net_device *dev);
-// //void rtl8192_rq_tx_ack(struct net_device *dev);
- #endif
void watch_dog_timer_callback(unsigned long data);
// printk("%2x ",read_nic_byte(dev,n));
}
-#if 1
len += snprintf(page + len, count - len,
"\n####################page 1##################\n ");
for(n=0;n<=max;)
// printk("%2x ",read_nic_byte(dev,n));
}
-#endif
len += snprintf(page + len, count - len,"\n");
*eof = 1;
}
-#if 0
-static int proc_get_cck_reg(char *page, char **start,
- off_t offset, int count,
- int *eof, void *data)
-{
- struct net_device *dev = data;
-// struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
-
- int len = 0;
- int i,n;
- int max = 0x5F;
- /* This dump the current register page */
- for(n=0;n<=max;)
- {
- //printk( "\nD: %2x> ", n);
- len += snprintf(page + len, count - len,
- "\nD: %2x > ",n);
-
- for(i=0;i<16 && n<=max;i++,n++)
- len += snprintf(page + len, count - len,
- "%2x ",read_phy_cck(dev,n));
-
- // printk("%2x ",read_nic_byte(dev,n));
- }
- len += snprintf(page + len, count - len,"\n");
-
-
- *eof = 1;
- return len;
-}
-
-#endif
-
-#if 0
-static int proc_get_ofdm_reg(char *page, char **start,
- off_t offset, int count,
- int *eof, void *data)
-{
- struct net_device *dev = data;
-// struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
-
- int len = 0;
- int i,n;
-
- //int max=0xff;
- int max = 0x40;
-
- /* This dump the current register page */
- for(n=0;n<=max;)
- {
- //printk( "\nD: %2x> ", n);
- len += snprintf(page + len, count - len,
- "\nD: %2x > ",n);
-
- for(i=0;i<16 && n<=max;i++,n++)
- len += snprintf(page + len, count - len,
- "%2x ",read_phy_ofdm(dev,n));
-
- // printk("%2x ",read_nic_byte(dev,n));
- }
- len += snprintf(page + len, count - len,"\n");
-
-
-
- *eof = 1;
- return len;
-}
-
-#endif
-
-#if 0
-static int proc_get_stats_hw(char *page, char **start,
- off_t offset, int count,
- int *eof, void *data)
-{
- struct net_device *dev = data;
- struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
-
- int len = 0;
-
- len += snprintf(page + len, count - len,
- "NIC int: %lu\n"
- "Total int: %lu\n",
- priv->stats.ints,
- priv->stats.shints);
-
- *eof = 1;
- return len;
-}
-#endif
static int proc_get_stats_tx(char *page, char **start,
off_t offset, int count,
*eof = 1;
return len;
}
-#if 0
-#if WIRELESS_EXT >= 12 && WIRELESS_EXT < 17
-
-static struct iw_statistics *r8192_get_wireless_stats(struct net_device *dev)
-{
- struct r8192_priv *priv = ieee80211_priv(dev);
-
- return &priv->wstats;
-}
-#endif
-#endif
void rtl8192_proc_module_init(void)
{
RT_TRACE(COMP_INIT, "Initializing proc filesystem");
-#if(LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))
- rtl8192_proc=create_proc_entry(RTL819xU_MODULE_NAME, S_IFDIR, proc_net);
-#else
rtl8192_proc=create_proc_entry(RTL819xU_MODULE_NAME, S_IFDIR, init_net.proc_net);
-#endif
}
void rtl8192_proc_module_remove(void)
{
-#if(LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))
- remove_proc_entry(RTL819xU_MODULE_NAME, proc_net);
-#else
remove_proc_entry(RTL819xU_MODULE_NAME, init_net.proc_net);
-#endif
}
dev->name);
return;
}
- #if 0
- e = create_proc_read_entry("stats-hw", S_IFREG | S_IRUGO,
- priv->dir_dev, proc_get_stats_hw, dev);
-
- if (!e) {
- DMESGE("Unable to initialize "
- "/proc/net/rtl8192/%s/stats-hw\n",
- dev->name);
- }
- #endif
e = create_proc_read_entry("stats-rx", S_IFREG | S_IRUGO,
priv->dir_dev, proc_get_stats_rx, dev);
"/proc/net/rtl8192/%s/stats-tx\n",
dev->name);
}
- #if 0
- e = create_proc_read_entry("stats-ieee", S_IFREG | S_IRUGO,
- priv->dir_dev, proc_get_stats_ieee, dev);
-
- if (!e) {
- DMESGE("Unable to initialize "
- "/proc/net/rtl8192/%s/stats-ieee\n",
- dev->name);
- }
-
- #endif
e = create_proc_read_entry("stats-ap", S_IFREG | S_IRUGO,
priv->dir_dev, proc_get_stats_ap, dev);
"/proc/net/rtl8192/%s/registers\n",
dev->name);
}
-#if 0
- e = create_proc_read_entry("cck-registers", S_IFREG | S_IRUGO,
- priv->dir_dev, proc_get_cck_reg, dev);
- if (!e) {
- RT_TRACE(COMP_ERR, "Unable to initialize "
- "/proc/net/rtl8192/%s/cck-registers\n",
- dev->name);
- }
-
- e = create_proc_read_entry("ofdm-registers", S_IFREG | S_IRUGO,
- priv->dir_dev, proc_get_ofdm_reg, dev);
- if (!e) {
- RT_TRACE(COMP_ERR, "Unable to initialize "
- "/proc/net/rtl8192/%s/ofdm-registers\n",
- dev->name);
- }
-#endif
}
/****************************************************************************
-----------------------------MISC STUFF-------------------------
struct r8192_priv *priv = ieee80211_priv(dev);
//rtl8192_commit(dev);
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
schedule_work(&priv->reset_wq);
-#else
- schedule_task(&priv->reset_wq);
-#endif
//DMESG("TXTIMEOUT");
}
------------------------------HW STUFF---------------------------
*****************************************************************************/
-#if 0
-void rtl8192_irq_enable(struct net_device *dev)
-{
- struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
- //priv->irq_enabled = 1;
-/*
- write_nic_word(dev,INTA_MASK,INTA_RXOK | INTA_RXDESCERR | INTA_RXOVERFLOW |\
- INTA_TXOVERFLOW | INTA_HIPRIORITYDESCERR | INTA_HIPRIORITYDESCOK |\
- INTA_NORMPRIORITYDESCERR | INTA_NORMPRIORITYDESCOK |\
- INTA_LOWPRIORITYDESCERR | INTA_LOWPRIORITYDESCOK | INTA_TIMEOUT);
-*/
- write_nic_word(dev,INTA_MASK, priv->irq_mask);
-}
-
-
-void rtl8192_irq_disable(struct net_device *dev)
-{
-// struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
-
- write_nic_word(dev,INTA_MASK,0);
- force_pci_posting(dev);
-// priv->irq_enabled = 0;
-}
-#endif
void rtl8192_set_mode(struct net_device *dev,int mode)
{
// u32 tx;
RT_TRACE(COMP_CH, "=====>%s()====ch:%d\n", __FUNCTION__, ch);
priv->chan=ch;
- #if 0
- if(priv->ieee80211->iw_mode == IW_MODE_ADHOC ||
- priv->ieee80211->iw_mode == IW_MODE_MASTER){
-
- priv->ieee80211->link_state = WLAN_LINK_ASSOCIATED;
- priv->ieee80211->master_chan = ch;
- rtl8192_update_beacon_ch(dev);
- }
- #endif
/* this hack should avoid frame TX during channel setting*/
#endif
}
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-static void rtl8192_rx_isr(struct urb *urb, struct pt_regs *regs);
-#else
static void rtl8192_rx_isr(struct urb *urb);
-#endif
//static void rtl8192_rx_isr(struct urb *rx_urb);
u32 get_rxpacket_shiftbytes_819xusb(struct ieee80211_rx_stats *pstats)
skb = __dev_alloc_skb(RX_URB_SIZE, GFP_KERNEL);
if (!skb)
break;
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
entry = usb_alloc_urb(0, GFP_KERNEL);
-#else
- entry = usb_alloc_urb(0);
-#endif
if (!entry) {
kfree_skb(skb);
break;
skb = __dev_alloc_skb(RX_URB_SIZE ,GFP_KERNEL);
if (!skb)
break;
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
entry = usb_alloc_urb(0, GFP_KERNEL);
-#else
- entry = usb_alloc_urb(0);
-#endif
if (!entry) {
kfree_skb(skb);
break;
rtl8192_rx_initiate(dev);
// rtl8192_set_rxconf(dev);
-#if 0
- if(NIC_8187 == priv->card_8187) {
- cmd=read_nic_byte(dev,CMD);
- write_nic_byte(dev,CMD,cmd | (1<<CMD_RX_ENABLE_SHIFT));
- }
- else {
- //write_nic_dword(dev, RX_CONF, priv->ReceiveConfig);
- }
-#endif
}
void rtl8192_tx_enable(struct net_device *dev)
{
-#if 0
- u8 cmd;
- u8 byte;
- u32 txconf;
- struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
- //test loopback
- // priv->TransmitConfig |= (TX_LOOPBACK_BASEBAND<<TX_LOOPBACK_SHIFT);
- if(NIC_8187B == priv->card_8187){
- write_nic_dword(dev, TX_CONF, priv->TransmitConfig);
- byte = read_nic_byte(dev, MSR);
- byte |= MSR_LINK_ENEDCA;
- write_nic_byte(dev, MSR, byte);
- } else {
- byte = read_nic_byte(dev,CW_CONF);
- byte &= ~(1<<CW_CONF_PERPACKET_CW_SHIFT);
- byte &= ~(1<<CW_CONF_PERPACKET_RETRY_SHIFT);
- write_nic_byte(dev, CW_CONF, byte);
-
- byte = read_nic_byte(dev, TX_AGC_CTL);
- byte &= ~(1<<TX_AGC_CTL_PERPACKET_GAIN_SHIFT);
- byte &= ~(1<<TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT);
- byte &= ~(1<<TX_AGC_CTL_FEEDBACK_ANT);
- write_nic_byte(dev, TX_AGC_CTL, byte);
-
- txconf= read_nic_dword(dev,TX_CONF);
-
-
- txconf = txconf &~ TX_LOOPBACK_MASK;
-
-#ifndef LOOP_TEST
- txconf = txconf | (TX_LOOPBACK_NONE<<TX_LOOPBACK_SHIFT);
-#else
- txconf = txconf | (TX_LOOPBACK_BASEBAND<<TX_LOOPBACK_SHIFT);
-#endif
- txconf = txconf &~ TCR_SRL_MASK;
- txconf = txconf &~ TCR_LRL_MASK;
-
- txconf = txconf | (priv->retry_data<<TX_LRLRETRY_SHIFT); // long
- txconf = txconf | (priv->retry_rts<<TX_SRLRETRY_SHIFT); // short
-
- txconf = txconf &~ (1<<TX_NOCRC_SHIFT);
-
- txconf = txconf &~ TCR_MXDMA_MASK;
- txconf = txconf | (TCR_MXDMA_2048<<TCR_MXDMA_SHIFT);
-
- txconf = txconf | TCR_DISReqQsize;
- txconf = txconf | TCR_DISCW;
- txconf = txconf &~ TCR_SWPLCPLEN;
-
- txconf=txconf | (1<<TX_NOICV_SHIFT);
-
- write_nic_dword(dev,TX_CONF,txconf);
-
-#ifdef DEBUG_TX
- DMESG("txconf: %x %x",txconf,read_nic_dword(dev,TX_CONF));
-#endif
-
- cmd=read_nic_byte(dev,CMD);
- write_nic_byte(dev,CMD,cmd | (1<<CMD_TX_ENABLE_SHIFT));
- }
-#endif
-}
-
-#if 0
-void rtl8192_beacon_tx_enable(struct net_device *dev)
-{
- struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
- priv->dma_poll_mask &=~(1<<TX_DMA_STOP_BEACON_SHIFT);
- rtl8192_set_mode(dev,EPROM_CMD_CONFIG);
- write_nic_byte(dev,TX_DMA_POLLING,priv->dma_poll_mask);
- rtl8192_set_mode(dev,EPROM_CMD_NORMAL);
}
-void rtl8192_
-_disable(struct net_device *dev)
-{
- struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
- priv->dma_poll_mask |= (1<<TX_DMA_STOP_BEACON_SHIFT);
- rtl8192_set_mode(dev,EPROM_CMD_CONFIG);
- write_nic_byte(dev,TX_DMA_POLLING,priv->dma_poll_mask);
- rtl8192_set_mode(dev,EPROM_CMD_NORMAL);
-}
-
-#endif
-
void rtl8192_rtx_disable(struct net_device *dev)
{
int alloc_tx_beacon_desc_ring(struct net_device *dev, int count)
{
- #if 0
- int i;
- u32 *tmp;
- struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
-
- priv->txbeaconring = (u32*)pci_alloc_consistent(priv->pdev,
- sizeof(u32)*8*count,
- &priv->txbeaconringdma);
- if (!priv->txbeaconring) return -1;
- for (tmp=priv->txbeaconring,i=0;i<count;i++){
- *tmp = *tmp &~ (1<<31); // descriptor empty, owned by the drv
- /*
- *(tmp+2) = (u32)dma_tmp;
- *(tmp+3) = bufsize;
- */
- if(i+1<count)
- *(tmp+4) = (u32)priv->txbeaconringdma+((i+1)*8*4);
- else
- *(tmp+4) = (u32)priv->txbeaconringdma;
-
- tmp=tmp+8;
- }
- #endif
return 0;
}
-#if 0
-void rtl8192_reset(struct net_device *dev)
-{
-
- //struct r8192_priv *priv = ieee80211_priv(dev);
- //u8 cr;
-
-
- /* make sure the analog power is on before
- * reset, otherwise reset may fail
- */
-#if 0
- if(NIC_8187 == priv->card_8187) {
- rtl8192_set_anaparam(dev, RTL8225_ANAPARAM_ON);
- rtl8185_set_anaparam2(dev, RTL8225_ANAPARAM2_ON);
- rtl8192_irq_disable(dev);
- mdelay(200);
- write_nic_byte_E(dev,0x18,0x10);
- write_nic_byte_E(dev,0x18,0x11);
- write_nic_byte_E(dev,0x18,0x00);
- mdelay(200);
- }
-#endif
- printk("=====>reset?\n");
-#if 0
- cr=read_nic_byte(dev,CMD);
- cr = cr & 2;
- cr = cr | (1<<CMD_RST_SHIFT);
- write_nic_byte(dev,CMD,cr);
-
- force_pci_posting(dev);
-
- mdelay(200);
-
- if(read_nic_byte(dev,CMD) & (1<<CMD_RST_SHIFT))
- RT_TRACE(COMP_ERR, "Card reset timeout!\n");
- else
- RT_TRACE(COMP_DOWN, "Card successfully reset\n");
-#endif
-#if 0
- if(NIC_8187 == priv->card_8187) {
-
- printk("This is RTL8187 Reset procedure\n");
- rtl8192_set_mode(dev,EPROM_CMD_LOAD);
- force_pci_posting(dev);
- mdelay(200);
-
- /* after the eeprom load cycle, make sure we have
- * correct anaparams
- */
- rtl8192_set_anaparam(dev, RTL8225_ANAPARAM_ON);
- rtl8185_set_anaparam2(dev, RTL8225_ANAPARAM2_ON);
- }
- else
-#endif
- printk("This is RTL8187B Reset procedure\n");
-
-}
-#endif
inline u16 ieeerate2rtlrate(int rate)
{
switch(rate){
/* The protype of rx_isr has changed since one verion of Linux Kernel */
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-static void rtl8192_rx_isr(struct urb *urb, struct pt_regs *regs)
-#else
static void rtl8192_rx_isr(struct urb *urb)
-#endif
{
struct sk_buff *skb = (struct sk_buff *) urb->context;
struct rtl8192_rx_info *info = (struct rtl8192_rx_info *)skb->cb;
// printk("%s():rx status err\n",__FUNCTION__);
return;
}
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,14)
skb_unlink(skb, &priv->rx_queue);
-#else
- __skb_unlink(skb,&priv->rx_queue);
-#endif
skb_put(skb, urb->actual_length);
skb_queue_tail(&priv->skb_queue, skb);
return status;
}
-#if 0
-void rtl8192_tx_queues_stop(struct net_device *dev)
-{
- //struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
- u8 dma_poll_mask = (1<<TX_DMA_STOP_LOWPRIORITY_SHIFT);
- dma_poll_mask |= (1<<TX_DMA_STOP_HIPRIORITY_SHIFT);
- dma_poll_mask |= (1<<TX_DMA_STOP_NORMPRIORITY_SHIFT);
- dma_poll_mask |= (1<<TX_DMA_STOP_BEACON_SHIFT);
-
- rtl8192_set_mode(dev,EPROM_CMD_CONFIG);
- write_nic_byte(dev,TX_DMA_POLLING,dma_poll_mask);
- rtl8192_set_mode(dev,EPROM_CMD_NORMAL);
-}
-#endif
void rtl8192_data_hard_stop(struct net_device *dev)
{
//FIXME !!
- #if 0
- struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
- priv->dma_poll_mask |= (1<<TX_DMA_STOP_LOWPRIORITY_SHIFT);
- rtl8192_set_mode(dev,EPROM_CMD_CONFIG);
- write_nic_byte(dev,TX_DMA_POLLING,priv->dma_poll_mask);
- rtl8192_set_mode(dev,EPROM_CMD_NORMAL);
- #endif
}
void rtl8192_data_hard_resume(struct net_device *dev)
{
// FIXME !!
- #if 0
- struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
- priv->dma_poll_mask &= ~(1<<TX_DMA_STOP_LOWPRIORITY_SHIFT);
- rtl8192_set_mode(dev,EPROM_CMD_CONFIG);
- write_nic_byte(dev,TX_DMA_POLLING,priv->dma_poll_mask);
- rtl8192_set_mode(dev,EPROM_CMD_NORMAL);
- #endif
}
/* this function TX data frames when the ieee80211 stack requires this.
u8 MapHwQueueToFirmwareQueue(u8 QueueID);
struct sk_buff *DrvAggr_Aggregation(struct net_device *dev, struct ieee80211_drv_agg_txb *pSendList)
{
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
struct ieee80211_device *ieee = netdev_priv(dev);
-#else
- struct ieee80211_device *ieee = (struct ieee80211_device *)dev->priv;
-#endif
struct r8192_priv *priv = ieee80211_priv(dev);
cb_desc *tcb_desc = NULL;
u8 i;
/*DWORD 1*/
tx_agg_desc->SecCAMID= 0;
tx_agg_desc->RATid = tcb_desc->RATRIndex;
-#if 0
- /* Fill security related */
- if( pTcb->bEncrypt && !Adapter->MgntInfo.SecurityInfo.SWTxEncryptFlag)
- {
- EncAlg = SecGetEncryptionOverhead(
- Adapter,
- &EncryptionMPDUHeadOverhead,
- &EncryptionMPDUTailOverhead,
- NULL,
- NULL,
- FALSE,
- FALSE);
- //2004/07/22, kcwu, EncryptionMPDUHeadOverhead has been added in previous code
- //MPDUOverhead = EncryptionMPDUHeadOverhead + EncryptionMPDUTailOverhead;
- MPDUOverhead = EncryptionMPDUTailOverhead;
- tx_agg_desc->NoEnc = 0;
- RT_TRACE(COMP_SEC, DBG_LOUD, ("******We in the loop SecCAMID is %d SecDescAssign is %d The Sec is %d********\n",tx_agg_desc->SecCAMID,tx_agg_desc->SecDescAssign,EncAlg));
- //CamDumpAll(Adapter);
- }
- else
-#endif
{
//MPDUOverhead = 0;
tx_agg_desc->NoEnc = 1;
}
-#if 0
- switch(EncAlg){
- case NO_Encryption:
- tx_agg_desc->SecType = 0x0;
- break;
- case WEP40_Encryption:
- case WEP104_Encryption:
- tx_agg_desc->SecType = 0x1;
- break;
- case TKIP_Encryption:
- tx_agg_desc->SecType = 0x2;
- break;
- case AESCCMP_Encryption:
- tx_agg_desc->SecType = 0x3;
- break;
- default:
- tx_agg_desc->SecType = 0x0;
- break;
- }
-#else
tx_agg_desc->SecType = 0x0;
-#endif
if (tcb_desc->bHwSec) {
switch (priv->ieee80211->pairwise_key_type)
u8 DrvAggr_GetAggregatibleList(struct net_device *dev, struct sk_buff *skb,
struct ieee80211_drv_agg_txb *pSendList)
{
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
struct ieee80211_device *ieee = netdev_priv(dev);
-#else
- struct ieee80211_device *ieee = (struct ieee80211_device *)dev->priv;
-#endif
PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
u16 nMaxAggrNum = pHTInfo->UsbTxAggrNum;
cb_desc *tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
}
#endif
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-static void rtl8192_tx_isr(struct urb *tx_urb, struct pt_regs *reg)
-#else
static void rtl8192_tx_isr(struct urb *tx_urb)
-#endif
{
struct sk_buff *skb = (struct sk_buff*)tx_urb->context;
struct net_device *dev = NULL;
atomic_dec(&priv->tx_pending[queue_index]);
}
-#if 0 //we need to send zero byte packet just after 512 byte(64 byte)packet is transmitted, or we will halt. It will greatly reduced available page in FW, and ruin our throughput. WB 2008.08.27
- if(BufLen > 0 && ((BufLen % 512 == 0)||(BufLen % 64 == 0))) {
- bToSend0Byte = true;
- }
-
- bToSend0Byte = false;
- //
- // Note that, we at most handle 1 MPDU to send here, either
- // fragment or MPDU in wait queue.
- //
- if(!bToSend0Byte)
-#endif
{
//
// Handle HW Beacon:
// We had transfer our beacon frame to host controler at this moment.
//
-#if 0
- if(tcb_desc->tx_queue == BEACON_QUEUE)
- {
- priv->bSendingBeacon = FALSE;
- }
-#endif
//
// Caution:
// Handling the wait queue of command packets.
if(DrvAggr_GetAggregatibleList(dev, skb, &SendList) > 1) {
skb = DrvAggr_Aggregation(dev, &SendList);
-#if 0
- printk("=============>to send aggregated packet!\n");
- RT_DEBUG_DATA(COMP_SEND, skb->cb, sizeof(skb->cb));
- printk("\n=================skb->len = %d\n", skb->len);
- RT_DEBUG_DATA(COMP_SEND, skb->data, skb->len);
-#endif
}
}
priv->ieee80211->softmac_hard_start_xmit(skb, dev);
}
}
-#if 0
- else
- {
- RT_TRACE( COMP_SEND,"HalUsbOutComplete(%d): bToSend0Byte.\n", PipeIndex);
-
- //
- // In this case, we don't return skb now.
- // It will be returned when the 0-byte request completed.
- //
-
- //
- // Bulk out an 0-byte padding transfer.
- //
- HalUsbOut0Byte(pAdapter, PipeIndex, skb);
- }
-
-#endif
}
void rtl8192_beacon_stop(struct net_device *dev)
//temporary hw beacon is not used any more.
//open it when necessary
-#if 1
void rtl819xusb_beacon_tx(struct net_device *dev,u16 tx_rate)
{
-#if 0
- struct r8192_priv *priv = ieee80211_priv(dev);
- struct sk_buff *skb;
- int i = 0;
- //u8 cr;
-
- rtl8192_net_update(dev);
-
- skb = ieee80211_get_beacon(priv->ieee80211);
- if(!skb){
- DMESG("not enought memory for allocating beacon");
- return;
- }
-
-
- write_nic_byte(dev, BQREQ, read_nic_byte(dev, BQREQ) | (1<<7));
-
- i=0;
- //while(!read_nic_byte(dev,BQREQ & (1<<7)))
- while( (read_nic_byte(dev, BQREQ) & (1<<7)) == 0 )
- {
- msleep_interruptible_rtl(HZ/2);
- if(i++ > 10){
- DMESGW("get stuck to wait HW beacon to be ready");
- return ;
- }
- }
- skb->cb[0] = NORM_PRIORITY;
- skb->cb[1] = 0; //morefragment = 0
- skb->cb[2] = ieeerate2rtlrate(tx_rate);
-
- rtl8192_tx(dev,skb);
-
-#endif
}
-#endif
inline u8 rtl8192_IsWirelessBMode(u16 rate)
{
if( ((rate <= 110) && (rate != 60) && (rate != 90)) || (rate == 220) )
void rtl819xU_cmd_isr(struct urb *tx_cmd_urb, struct pt_regs *regs)
{
-#if 0
- struct net_device *dev = (struct net_device*)tx_cmd_urb->context;
- struct r8192_priv *priv = ieee80211_priv(dev);
- int last_init_packet = 0;
- u8 *ptr_cmd_buf;
- u16 cmd_buf_len;
-
- if(tx_cmd_urb->status != 0) {
- priv->pFirmware.firmware_seg_index = 0; //only begin transter, should it can be set to 1
- }
-
- /* Free the urb and the corresponding buf for common Tx cmd packet, or
- * last segment of each firmware img.
- */
- if((priv->pFirmware.firmware_seg_index == 0) ||(priv->pFirmware.firmware_seg_index == priv->pFirmware.firmware_seg_maxnum)) {
- priv->pFirmware.firmware_seg_index = 0;//only begin transter, should it can be set to 1
- } else {
- /* prepare for last transfer */
- /* update some infomation for */
- /* last segment of the firmware img need indicate to device */
- priv->pFirmware.firmware_seg_index++;
- if(priv->pFirmware.firmware_seg_index == priv->pFirmware.firmware_seg_maxnum) {
- last_init_packet = 1;
- }
-
- cmd_buf_len = priv->pFirmware.firmware_seg_container[priv->pFirmware.firmware_seg_index-1].seg_size;
- ptr_cmd_buf = priv->pFfirmware.firmware_seg_container[priv->pFfirmware.firmware_seg_index-1].seg_ptr;
- rtl819xU_tx_cmd(dev, ptr_cmd_buf, cmd_buf_len, last_init_packet, DESC_PACKET_TYPE_INIT);
- }
-
- kfree(tx_cmd_urb->transfer_buffer);
-#endif
usb_free_urb(tx_cmd_urb);
}
//printk("\n %s::queue_index = %d\n",__FUNCTION__, queue_index);
atomic_inc(&priv->tx_pending[queue_index]);
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
tx_urb = usb_alloc_urb(0,GFP_ATOMIC);
-#else
- tx_urb = usb_alloc_urb(0);
-#endif
if(!tx_urb){
dev_kfree_skb(skb);
return -ENOMEM;
usb_fill_bulk_urb(tx_urb,priv->udev, usb_sndbulkpipe(priv->udev,idx_pipe), \
skb->data, skb->len, rtl8192_tx_isr, skb);
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
status = usb_submit_urb(tx_urb, GFP_ATOMIC);
-#else
- status = usb_submit_urb(tx_urb);
-#endif
if (!status){
return 0;
return tmp_Short;
}
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-static void tx_zero_isr(struct urb *tx_urb, struct pt_regs *reg)
-#else
static void tx_zero_isr(struct urb *tx_urb)
-#endif
{
return;
}
//int urb_len;
unsigned int idx_pipe;
// RT_DEBUG_DATA(COMP_SEND, tcb_desc, sizeof(cb_desc));
-#if 0
- /* Added by Annie for filling Len_Adjust field. 2005-12-14. */
- RT_ENC_ALG EncAlg = NO_Encryption;
-#endif
// printk("=============> %s\n", __FUNCTION__);
pend = atomic_read(&priv->tx_pending[tcb_desc->queue_index]);
/* we are locked here so the two atomic_read and inc are executed
* !!! For debug purpose
*/
if( pend > MAX_TX_URB){
-#if 0
- switch (tcb_desc->queue_index) {
- case VO_PRIORITY:
- priv->stats.txvodrop++;
- break;
- case VI_PRIORITY:
- priv->stats.txvidrop++;
- break;
- case BE_PRIORITY:
- priv->stats.txbedrop++;
- break;
- default://BK_PRIORITY
- priv->stats.txbkdrop++;
- break;
- }
-#endif
printk("To discard skb packet!\n");
dev_kfree_skb_any(skb);
return -1;
}
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
tx_urb = usb_alloc_urb(0,GFP_ATOMIC);
-#else
- tx_urb = usb_alloc_urb(0);
-#endif
if(!tx_urb){
dev_kfree_skb_any(skb);
return -ENOMEM;
/*DWORD 1*/
tx_desc->SecCAMID= 0;
tx_desc->RATid = tcb_desc->RATRIndex;
-#if 0
- /* Fill security related */
- if( pTcb->bEncrypt && !Adapter->MgntInfo.SecurityInfo.SWTxEncryptFlag)
- {
- EncAlg = SecGetEncryptionOverhead(
- Adapter,
- &EncryptionMPDUHeadOverhead,
- &EncryptionMPDUTailOverhead,
- NULL,
- NULL,
- FALSE,
- FALSE);
- //2004/07/22, kcwu, EncryptionMPDUHeadOverhead has been added in previous code
- //MPDUOverhead = EncryptionMPDUHeadOverhead + EncryptionMPDUTailOverhead;
- MPDUOverhead = EncryptionMPDUTailOverhead;
- tx_desc->NoEnc = 0;
- RT_TRACE(COMP_SEC, DBG_LOUD, ("******We in the loop SecCAMID is %d SecDescAssign is %d The Sec is %d********\n",tx_desc->SecCAMID,tx_desc->SecDescAssign,EncAlg));
- //CamDumpAll(Adapter);
- }
- else
-#endif
{
//MPDUOverhead = 0;
tx_desc->NoEnc = 1;
}
-#if 0
- switch(EncAlg){
- case NO_Encryption:
- tx_desc->SecType = 0x0;
- break;
- case WEP40_Encryption:
- case WEP104_Encryption:
- tx_desc->SecType = 0x1;
- break;
- case TKIP_Encryption:
- tx_desc->SecType = 0x2;
- break;
- case AESCCMP_Encryption:
- tx_desc->SecType = 0x3;
- break;
- default:
- tx_desc->SecType = 0x0;
- break;
- }
-#else
tx_desc->SecType = 0x0;
-#endif
if (tcb_desc->bHwSec)
{
switch (priv->ieee80211->pairwise_key_type)
/* Fill fields that are required to be initialized in all of the descriptors */
//DWORD 0
-#if 0
- tx_desc->FirstSeg = (tcb_desc->bFirstSeg)? 1:0;
- tx_desc->LastSeg = (tcb_desc->bLastSeg)?1:0;
-#else
tx_desc->FirstSeg = 1;
tx_desc->LastSeg = 1;
-#endif
tx_desc->OWN = 1;
#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
usb_sndbulkpipe(udev,idx_pipe), skb->data,
skb->len, rtl8192_tx_isr, skb);
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
status = usb_submit_urb(tx_urb, GFP_ATOMIC);
-#else
- status = usb_submit_urb(tx_urb);
-#endif
if (!status){
//we need to send 0 byte packet whenever 512N bytes/64N(HIGN SPEED/NORMAL SPEED) bytes packet has been transmitted. Otherwise, it will be halt to wait for another packet. WB. 2008.08.27
bool bSend0Byte = false;
}
if (bSend0Byte)
{
-#if 1
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
tx_urb_zero = usb_alloc_urb(0,GFP_ATOMIC);
-#else
- tx_urb_zero = usb_alloc_urb(0);
-#endif
if(!tx_urb_zero){
RT_TRACE(COMP_ERR, "can't alloc urb for zero byte\n");
return -ENOMEM;
usb_fill_bulk_urb(tx_urb_zero,udev,
usb_sndbulkpipe(udev,idx_pipe), &zero,
0, tx_zero_isr, dev);
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
status = usb_submit_urb(tx_urb_zero, GFP_ATOMIC);
-#else
- status = usb_submit_urb(tx_urb_zero);
-#endif
if (status){
RT_TRACE(COMP_ERR, "Error TX URB for zero byte %d, error %d", atomic_read(&priv->tx_pending[tcb_desc->queue_index]), status);
return -1;
}
-#endif
}
dev->trans_start = jiffies;
atomic_inc(&priv->tx_pending[tcb_desc->queue_index]);
#ifndef JACKSON_NEW_RX
for(i=0;i<(MAX_RX_URB+1);i++){
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
priv->rx_urb[i] = usb_alloc_urb(0,GFP_KERNEL);
-#else
- priv->rx_urb[i] = usb_alloc_urb(0);
-#endif
priv->rx_urb[i]->transfer_buffer = kmalloc(RX_URB_SIZE, GFP_KERNEL);
}
#endif
-#if 0
-void rtl8192_set_rate(struct net_device *dev)
-{
- int i;
- u16 word;
- int basic_rate,min_rr_rate,max_rr_rate;
-
-// struct r8192_priv *priv = ieee80211_priv(dev);
-
- //if (ieee80211_is_54g(priv->ieee80211->current_network) &&
-// priv->ieee80211->state == IEEE80211_LINKED){
- basic_rate = ieeerate2rtlrate(240);
- min_rr_rate = ieeerate2rtlrate(60);
- max_rr_rate = ieeerate2rtlrate(240);
-
-//
-// }else{
-// basic_rate = ieeerate2rtlrate(20);
-// min_rr_rate = ieeerate2rtlrate(10);
-// max_rr_rate = ieeerate2rtlrate(110);
-// }
-
- write_nic_byte(dev, RESP_RATE,
- max_rr_rate<<MAX_RESP_RATE_SHIFT| min_rr_rate<<MIN_RESP_RATE_SHIFT);
-
- //word = read_nic_word(dev, BRSR);
- word = read_nic_word(dev, BRSR_8187);
- word &= ~BRSR_MBR_8185;
-
-
- for(i=0;i<=basic_rate;i++)
- word |= (1<<i);
-
- //write_nic_word(dev, BRSR, word);
- write_nic_word(dev, BRSR_8187, word);
- //DMESG("RR:%x BRSR: %x", read_nic_byte(dev,RESP_RATE), read_nic_word(dev,BRSR));
-}
-#endif
extern void rtl8192_update_ratr_table(struct net_device* dev);
void rtl8192_link_change(struct net_device *dev)
{
{
rtl8192_net_update(dev);
rtl8192_update_ratr_table(dev);
-#if 1
//add this as in pure N mode, wep encryption will use software way, but there is no chance to set this as wep will not set group key in wext. WB.2008.07.08
if ((KEY_TYPE_WEP40 == ieee->pairwise_key_type) || (KEY_TYPE_WEP104 == ieee->pairwise_key_type))
EnableHWSecurityConfig8192(dev);
-#endif
}
/*update timing params*/
// RT_TRACE(COMP_CH, "========>%s(), chan:%d\n", __FUNCTION__, priv->chan);
};
-#if LINUX_VERSION_CODE >=KERNEL_VERSION(2,6,20)
void rtl8192_update_beacon(struct work_struct * work)
{
struct r8192_priv *priv = container_of(work, struct r8192_priv, update_beacon_wq.work);
struct net_device *dev = priv->ieee80211->dev;
-#else
-void rtl8192_update_beacon(struct net_device *dev)
-{
- struct r8192_priv *priv = ieee80211_priv(dev);
-#endif
struct ieee80211_device* ieee = priv->ieee80211;
struct ieee80211_network* net = &ieee->current_network;
* background support to run QoS activate functionality
*/
int WDCAPARA_ADD[] = {EDCAPARA_BE,EDCAPARA_BK,EDCAPARA_VI,EDCAPARA_VO};
-#if LINUX_VERSION_CODE >=KERNEL_VERSION(2,6,20)
void rtl8192_qos_activate(struct work_struct * work)
{
struct r8192_priv *priv = container_of(work, struct r8192_priv, qos_activate);
struct net_device *dev = priv->ieee80211->dev;
-#else
-void rtl8192_qos_activate(struct net_device *dev)
-{
- struct r8192_priv *priv = ieee80211_priv(dev);
-#endif
struct ieee80211_qos_parameters *qos_parameters = &priv->ieee80211->current_network.qos_data.parameters;
u8 mode = priv->ieee80211->current_network.mode;
//u32 size = sizeof(struct ieee80211_qos_parameters);
if (priv == NULL)
return;
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,16))
- down(&priv->mutex);
-#else
mutex_lock(&priv->mutex);
-#endif
if(priv->ieee80211->state != IEEE80211_LINKED)
goto success;
RT_TRACE(COMP_QOS,"qos active process with associate response received\n");
}
success:
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,16))
- up(&priv->mutex);
-#else
mutex_unlock(&priv->mutex);
-#endif
}
static int rtl8192_qos_handle_probe_response(struct r8192_priv *priv,
network->qos_data.param_count)) {
network->qos_data.old_param_count =
network->qos_data.param_count;
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
queue_work(priv->priv_wq, &priv->qos_activate);
-#else
- schedule_task(&priv->qos_activate);
-#endif
RT_TRACE (COMP_QOS, "QoS parameters change call "
"qos_activate\n");
}
&def_qos_parameters, size);
if ((network->qos_data.active == 1) && (active_network == 1)) {
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
queue_work(priv->priv_wq, &priv->qos_activate);
-#else
- schedule_task(&priv->qos_activate);
-#endif
RT_TRACE(COMP_QOS, "QoS was disabled call qos_activate \n");
}
network->qos_data.active = 0;
struct r8192_priv *priv = ieee80211_priv(dev);
rtl8192_qos_handle_probe_response(priv,1,network);
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
queue_delayed_work(priv->priv_wq, &priv->update_beacon_wq, 0);
-#else
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
- schedule_task(&priv->update_beacon_wq);
-#else
- queue_work(priv->priv_wq, &priv->update_beacon_wq);
-#endif
-
-#endif
return 0;
}
&network->qos_data.parameters,\
sizeof(struct ieee80211_qos_parameters));
priv->ieee80211->current_network.qos_data.active = 1;
-#if 0
- if((priv->ieee80211->current_network.qos_data.param_count != \
- network->qos_data.param_count))
-#endif
{
set_qos_param = 1;
/* update qos parameter for current network */
RT_TRACE(COMP_QOS, "%s: network->flags = %d,%d\n",__FUNCTION__,network->flags ,priv->ieee80211->current_network.qos_data.active);
if (set_qos_param == 1)
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
queue_work(priv->priv_wq, &priv->qos_activate);
-#else
- schedule_task(&priv->qos_activate);
-#endif
return ret;
static u8 ccmp_rsn_ie[4] = {0x00, 0x0f, 0xac, 0x04};
bool GetNmodeSupportBySecCfg8192(struct net_device*dev)
{
-#if 1
struct r8192_priv* priv = ieee80211_priv(dev);
struct ieee80211_device* ieee = priv->ieee80211;
struct ieee80211_network * network = &ieee->current_network;
return true;
}
-#if 0
- //In here we discuss with SD4 David. He think we still can send TKIP in broadcast group key in MCS rate.
- //We can't force in G mode if Pairwie key is AES and group key is TKIP
- if((pSecInfo->GroupEncAlgorithm == WEP104_Encryption) || (pSecInfo->GroupEncAlgorithm == WEP40_Encryption) ||
- (pSecInfo->PairwiseEncAlgorithm == WEP104_Encryption) ||
- (pSecInfo->PairwiseEncAlgorithm == WEP40_Encryption) || (pSecInfo->PairwiseEncAlgorithm == TKIP_Encryption))
- {
- return false;
- }
- else
- return true;
-#endif
return true;
-#endif
}
bool GetHalfNmodeSupportByAPs819xUsb(struct net_device* dev)
struct r8192_priv *priv = ieee80211_priv(dev);
u8 bSupportMode = rtl8192_getSupportedWireleeMode(dev);
-#if 1
if ((wireless_mode == WIRELESS_MODE_AUTO) || ((wireless_mode&bSupportMode)==0))
{
if(bSupportMode & WIRELESS_MODE_N_24G)
priv->ieee80211->pHTInfo->bEnableHT = 0;
RT_TRACE(COMP_INIT, "Current Wireless Mode is %x\n", wireless_mode);
rtl8192_refresh_supportrate(priv);
-#endif
}
//init priv variables here. only non_zero value should be initialized here.
//spin_lock_init(&priv->rf_lock);
sema_init(&priv->wx_sem,1);
sema_init(&priv->rf_sem,1);
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,16))
- sema_init(&priv->mutex, 1);
-#else
mutex_init(&priv->mutex);
-#endif
}
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
extern void rtl819x_watchdog_wqcallback(struct work_struct *work);
-#else
-extern void rtl819x_watchdog_wqcallback(struct net_device *dev);
-#endif
void rtl8192_irq_rx_tasklet(struct r8192_priv *priv);
//init tasklet and wait_queue here. only 2.6 above kernel is considered
{
struct r8192_priv *priv = ieee80211_priv(dev);
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
#ifdef PF_SYNCTHREAD
priv->priv_wq = create_workqueue(DRV_NAME,0);
#else
priv->priv_wq = create_workqueue(DRV_NAME);
#endif
-#endif
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
INIT_WORK(&priv->reset_wq, rtl8192_restart);
//INIT_DELAYED_WORK(&priv->watch_dog_wq, hal_dm_watchdog);
//INIT_WORK(&priv->SwChnlWorkItem, rtl8192_SwChnl_WorkItem);
//INIT_WORK(&priv->SetBWModeWorkItem, rtl8192_SetBWModeWorkItem);
INIT_WORK(&priv->qos_activate, rtl8192_qos_activate);
-#else
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
- tq_init(&priv->reset_wq, (void*)rtl8192_restart, dev);
- tq_init(&priv->watch_dog_wq, (void*)rtl819x_watchdog_wqcallback, dev);
- tq_init(&priv->txpower_tracking_wq, (void*)dm_txpower_trackingcallback, dev);
- tq_init(&priv->rfpath_check_wq, (void*)dm_rf_pathcheck_workitemcallback, dev);
- tq_init(&priv->update_beacon_wq, (void*)rtl8192_update_beacon, dev);
- //tq_init(&priv->SwChnlWorkItem, (void*) rtl8192_SwChnl_WorkItem, dev);
- //tq_init(&priv->SetBWModeWorkItem, (void*)rtl8192_SetBWModeWorkItem, dev);
- tq_init(&priv->qos_activate, (void *)rtl8192_qos_activate, dev);
-#else
- INIT_WORK(&priv->reset_wq,(void(*)(void*)) rtl8192_restart,dev);
- //INIT_WORK(&priv->watch_dog_wq, (void(*)(void*)) hal_dm_watchdog,dev);
- INIT_WORK(&priv->watch_dog_wq, (void(*)(void*)) rtl819x_watchdog_wqcallback,dev);
- INIT_WORK(&priv->txpower_tracking_wq, (void(*)(void*)) dm_txpower_trackingcallback,dev);
-// INIT_WORK(&priv->gpio_change_rf_wq, (void(*)(void*)) dm_gpio_change_rf_callback,dev);
- INIT_WORK(&priv->rfpath_check_wq, (void(*)(void*)) dm_rf_pathcheck_workitemcallback,dev);
- INIT_WORK(&priv->update_beacon_wq, (void(*)(void*))rtl8192_update_beacon,dev);
- INIT_WORK(&priv->initialgain_operate_wq, (void(*)(void*))InitialGainOperateWorkItemCallBack,dev);
- //INIT_WORK(&priv->SwChnlWorkItem, (void(*)(void*)) rtl8192_SwChnl_WorkItem, dev);
- //INIT_WORK(&priv->SetBWModeWorkItem, (void(*)(void*)) rtl8192_SetBWModeWorkItem, dev);
- INIT_WORK(&priv->qos_activate, (void(*)(void *))rtl8192_qos_activate, dev);
-#endif
-#endif
tasklet_init(&priv->irq_rx_tasklet,
(void(*)(unsigned long))rtl8192_irq_rx_tasklet,
//config BB.
rtl8192_BBConfig(dev);
-#if 1
//Loopback mode or not
priv->LoopbackMode = RTL819xU_NO_LOOPBACK;
// priv->LoopbackMode = RTL819xU_MAC_LOOPBACK;
write_nic_byte(dev, 0x87, 0x0);
-#endif
return init_status;
}
* rtl8192_beacon_tx_enable(). rtl8192_beacon_tx_disable() might
* be used to stop beacon transmission
*/
-#if 0
-void rtl8192_start_tx_beacon(struct net_device *dev)
-{
- int i;
- struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
- u16 word;
- DMESG("Enabling beacon TX");
- //write_nic_byte(dev, TX_CONF,0xe6);// TX_CONF
- //rtl8192_init_beacon(dev);
- //set_nic_txring(dev);
-// rtl8192_prepare_beacon(dev);
- rtl8192_irq_disable(dev);
-// rtl8192_beacon_tx_enable(dev);
- rtl8192_set_mode(dev,EPROM_CMD_CONFIG);
- //write_nic_byte(dev,0x9d,0x20); //DMA Poll
- //write_nic_word(dev,0x7a,0);
- //write_nic_word(dev,0x7a,0x8000);
-
-
- word = read_nic_word(dev, BcnItv);
- word &= ~BcnItv_BcnItv; // clear Bcn_Itv
- write_nic_word(dev, BcnItv, word);
-
- write_nic_word(dev, AtimWnd,
- read_nic_word(dev, AtimWnd) &~ AtimWnd_AtimWnd);
-
- word = read_nic_word(dev, BCN_INTR_ITV);
- word &= ~BCN_INTR_ITV_MASK;
-
- //word |= priv->ieee80211->beacon_interval *
- // ((priv->txbeaconcount > 1)?(priv->txbeaconcount-1):1);
- // FIXME:FIXME check if correct ^^ worked with 0x3e8;
-
- write_nic_word(dev, BCN_INTR_ITV, word);
-
- //write_nic_word(dev,0x2e,0xe002);
- //write_nic_dword(dev,0x30,0xb8c7832e);
- for(i=0; i<ETH_ALEN; i++)
- write_nic_byte(dev, BSSID+i, priv->ieee80211->beacon_cell_ssid[i]);
-
-// rtl8192_update_msr(dev);
-
-
- //write_nic_byte(dev,CONFIG4,3); /* !!!!!!!!!! */
-
- rtl8192_set_mode(dev, EPROM_CMD_NORMAL);
-
- rtl8192_irq_enable(dev);
-
- /* VV !!!!!!!!!! VV*/
- /*
- rtl8192_set_mode(dev,EPROM_CMD_CONFIG);
- write_nic_byte(dev,0x9d,0x00);
- rtl8192_set_mode(dev,EPROM_CMD_NORMAL);
-*/
-}
-#endif
/***************************************************************************
-------------------------------NET STUFF---------------------------
***************************************************************************/
{
if(QueueID == TXCMD_QUEUE)
continue;
-#if 1
#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
if((skb_queue_len(&priv->ieee80211->skb_waitQ[QueueID]) == 0) && (skb_queue_len(&priv->ieee80211->skb_aggQ[QueueID]) == 0) && (skb_queue_len(&priv->ieee80211->skb_drv_aggQ[QueueID]) == 0))
#else
if((skb_queue_len(&priv->ieee80211->skb_waitQ[QueueID]) == 0) && (skb_queue_len(&priv->ieee80211->skb_aggQ[QueueID]) == 0))
#endif
continue;
-#endif
bCheckFwTxCnt = true;
}
// PlatformReleaseSpinLock(Adapter, RT_TX_SPINLOCK);
// spin_unlock_irqrestore(&priv->ieee80211->lock,flags);
// RT_TRACE(COMP_RESET,"bCheckFwTxCnt is %d\n",bCheckFwTxCnt);
-#if 1
if(bCheckFwTxCnt)
{
if(HalTxCheckStuck819xUsb(dev))
return RESET_TYPE_SILENT;
}
}
-#endif
return RESET_TYPE_NORESET;
}
rfState = priv->ieee80211->eRFPowerState;
TxResetType = TxCheckStuck(dev);
-#if 1
if( rfState != eRfOff ||
/*ADAPTER_TEST_STATUS_FLAG(Adapter, ADAPTER_STATUS_FW_DOWNLOAD_FAILURE)) &&*/
(priv->ieee80211->iw_mode != IW_MODE_ADHOC))
// set, STA cannot hear any packet a all. Emily, 2008.04.12
RxResetType = RxCheckStuck(dev);
}
-#endif
if(TxResetType==RESET_TYPE_NORMAL || RxResetType==RESET_TYPE_NORMAL)
return RESET_TYPE_NORMAL;
else if(TxResetType==RESET_TYPE_SILENT || RxResetType==RESET_TYPE_SILENT){
// Set the variable for reset.
priv->ResetProgress = RESET_TYPE_SILENT;
// rtl8192_close(dev);
-#if 1
down(&priv->wx_sem);
if(priv->up == 0)
{
printk("ieee->state is IEEE80211_LINKED\n");
ieee80211_stop_send_beacons(priv->ieee80211);
del_timer_sync(&ieee->associate_timer);
- #if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
cancel_delayed_work(&ieee->associate_retry_wq);
- #endif
ieee80211_stop_scan(ieee);
netif_carrier_off(dev);
up(&ieee->wx_sem);
RT_TRACE(COMP_ERR," ERR!!! %s(): Reset Failed!!\n", __FUNCTION__);
}
}
-#endif
ieee->is_silent_reset = 1;
-#if 1
EnableHWSecurityConfig8192(dev);
-#if 1
if(ieee->state == IEEE80211_LINKED && ieee->iw_mode == IW_MODE_INFRA)
{
ieee->set_chan(ieee->dev, ieee->current_network.channel);
-#if 1
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
queue_work(ieee->wq, &ieee->associate_complete_wq);
-#else
- schedule_task(&ieee->associate_complete_wq);
-#endif
-#endif
}
else if(ieee->state == IEEE80211_LINKED && ieee->iw_mode == IW_MODE_ADHOC)
ieee->data_hard_resume(ieee->dev);
netif_carrier_on(ieee->dev);
}
-#endif
CamRestoreAllEntry(dev);
// For test --> force write UFWP.
write_nic_byte(dev, UFWP, 1);
RT_TRACE(COMP_RESET, "Reset finished!! ====>[%d]\n", priv->reset_count);
-#endif
}
}
//Check polling bit is clear
// mdelay(1);
-#if 1
while((i--)>=0)
{
ulStatus = read_nic_dword(dev, RWCAM);
break;
}
}
-#endif
write_nic_dword(dev, RWCAM, target_command);
RT_TRACE(COMP_SEC,"CAM_read_entry(): WRITE A0: %x \n",target_command);
// printk("CAM_read_entry(): WRITE A0: %lx \n",target_command);
}
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
extern void rtl819x_watchdog_wqcallback(struct work_struct *work)
{
struct delayed_work *dwork = container_of(work,struct delayed_work,work);
struct r8192_priv *priv = container_of(dwork,struct r8192_priv,watch_dog_wq);
struct net_device *dev = priv->ieee80211->dev;
-#else
-extern void rtl819x_watchdog_wqcallback(struct net_device *dev)
-{
- struct r8192_priv *priv = ieee80211_priv(dev);
-#endif
struct ieee80211_device* ieee = priv->ieee80211;
RESET_TYPE ResetType = RESET_TYPE_NORESET;
static u8 check_reset_cnt=0;
notify_wx_assoc_event(priv->ieee80211);
RemovePeerTS(priv->ieee80211,priv->ieee80211->current_network.bssid);
priv->ieee80211->link_change(dev);
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
queue_work(priv->ieee80211->wq, &priv->ieee80211->associate_procedure_wq);
-#else
- schedule_task(&priv->ieee80211->associate_procedure_wq);
-#endif
}
}
//DbgPrint("Start to check silent reset\n");
}
// RT_TRACE(COMP_RESET,"%s():priv->force_reset is %d,priv->ResetProgress is %d, priv->bForcedSilentReset is %d,priv->bDisableNormalResetCheck is %d,ResetType is %d\n",__FUNCTION__,priv->force_reset,priv->ResetProgress,priv->bForcedSilentReset,priv->bDisableNormalResetCheck,ResetType);
-#if 1
if( (priv->force_reset) || (priv->ResetProgress==RESET_TYPE_NORESET &&
(priv->bForcedSilentReset ||
(!priv->bDisableNormalResetCheck && ResetType==RESET_TYPE_SILENT)))) // This is control by OID set in Pomelo
RT_TRACE(COMP_RESET,"%s():priv->force_reset is %d,priv->ResetProgress is %d, priv->bForcedSilentReset is %d,priv->bDisableNormalResetCheck is %d,ResetType is %d\n",__FUNCTION__,priv->force_reset,priv->ResetProgress,priv->bForcedSilentReset,priv->bDisableNormalResetCheck,ResetType);
rtl819x_ifsilentreset(dev);
}
-#endif
priv->force_reset = false;
priv->bForcedSilentReset = false;
priv->bResetInProgress = false;
{
struct r8192_priv *priv = ieee80211_priv((struct net_device *) data);
//printk("===============>watch_dog timer\n");
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
queue_delayed_work(priv->priv_wq,&priv->watch_dog_wq, 0);
-#else
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
- schedule_task(&priv->watch_dog_wq);
-#else
- queue_work(priv->priv_wq,&priv->watch_dog_wq);
-#endif
-#endif
mod_timer(&priv->watch_dog_timer, jiffies + MSECS(IEEE80211_WATCH_DOG_TIME));
-#if 0
- priv->watch_dog_timer.expires = jiffies + MSECS(IEEE80211_WATCH_DOG_TIME);
- add_timer(&priv->watch_dog_timer);
-#endif
}
int _rtl8192_up(struct net_device *dev)
{
{
struct r8192_priv *priv = ieee80211_priv(dev);
*/
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
void rtl8192_restart(struct work_struct *work)
{
struct r8192_priv *priv = container_of(work, struct r8192_priv, reset_wq);
struct net_device *dev = priv->ieee80211->dev;
-#else
-void rtl8192_restart(struct net_device *dev)
-{
-
- struct r8192_priv *priv = ieee80211_priv(dev);
-#endif
down(&priv->wx_sem);
memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
schedule_work(&priv->reset_wq);
-#else
- schedule_task(&priv->reset_wq);
-#endif
up(&priv->wx_sem);
return 0;
bcheck = true;
}else
{
- #if 0
- // if previous packet is aggregated packet, and current packet
- // (1) is not AMPDU
- // (2) is the first packet of one AMPDU
- // that means the previous packet is the last one aggregated packet
- if( !pcurrent_stats->bIsAMPDU || pcurrent_stats->bFirstMPDU)
- bcheck = true;
- #endif
}
priv->undecorated_smoothed_pwdb = pprevious_stats->RxPWDBAll;
//DbgPrint("First pwdb initialize \n");
}
-#if 1
if(pprevious_stats->RxPWDBAll > (u32)priv->undecorated_smoothed_pwdb)
{
priv->undecorated_smoothed_pwdb =
( ((priv->undecorated_smoothed_pwdb)*(Rx_Smooth_Factor-1)) +
(pprevious_stats->RxPWDBAll)) /(Rx_Smooth_Factor);
}
-#else
- //Fixed by Jacken 2008-03-20
- if(pPreviousRfd->Status.RxPWDBAll > (u32)pHalData->UndecoratedSmoothedPWDB)
- {
- pHalData->UndecoratedSmoothedPWDB =
- ( ((pHalData->UndecoratedSmoothedPWDB)* 5) + (pPreviousRfd->Status.RxPWDBAll)) / 6;
- pHalData->UndecoratedSmoothedPWDB = pHalData->UndecoratedSmoothedPWDB + 1;
- }
- else
- {
- pHalData->UndecoratedSmoothedPWDB =
- ( ((pHalData->UndecoratedSmoothedPWDB)* 5) + (pPreviousRfd->Status.RxPWDBAll)) / 6;
- }
-#endif
}
rx_evmX /= 2; //dbm
evm = rtl819x_evm_dbtopercentage(rx_evmX);
-#if 0
- EVM = SignalScaleMapping(EVM);//make it good looking, from 0~100
-#endif
//if(bpacket_match_bssid)
{
if(i==0) // Fill value in RFD, Get the first spatial stream only
&& (!pstats->bHwError) && (!pstats->bCRC)&& (!pstats->bICV));
bpacket_toself = bpacket_match_bssid & (eqMacAddr(praddr, priv->ieee80211->dev->dev_addr));
-#if 1//cosa
if(WLAN_FC_GET_FRAMETYPE(fc)== IEEE80211_STYPE_BEACON)
{
bPacketBeacon = true;
//DbgPrint("BlockAck, MatchBSSID = %d, ToSelf = %d \n", bPacketMatchBSSID, bPacketToSelf);
}
-#endif
if(bpacket_match_bssid)
stats->bIsAMPDU = (driver_info->PartAggr==1);
stats->bFirstMPDU = (driver_info->PartAggr==1) && (driver_info->FirstAGGR==1);
-#if 0
- // TODO: it is debug only. It should be disabled in released driver. 2007.1.12 by Joseph
- UpdateRxAMPDUHistogramStatistics8190(Adapter, pRfd);
-#endif
stats->TimeStampLow = driver_info->TSFL;
// xiong mask it, 070514
//pRfd->Status.TimeStampHigh = PlatformEFIORead4Byte(Adapter, TSFR+4);
}
#endif
/* for debug 2008.5.29 */
-#if 0
- {
- int i;
- printk("\n>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>\n");
- for(i = 0; i < skb->len; i++) {
- if(i % 10 == 0) printk("\n");
- printk("%02x ", skb->data[i]);
- }
- printk("\n<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<\n");
- }
-#endif
//added by vivi, for MP, 20080108
stats->RxIs40MHzPacket = driver_info->BW;
;
-#if 0
- desc = (u32*)(skb->data);
- cmd = (desc[0] >> 30) & 0x03;
-
- if(cmd == 0x00) {//beacon interrupt
- //send beacon packet
- skb = ieee80211_get_beacon(priv->ieee80211);
-
- if(!skb){
- DMESG("not enought memory for allocating beacon");
- return;
- }
- skb->cb[0] = BEACON_PRIORITY;
- skb->cb[1] = 0;
- skb->cb[2] = ieeerate2rtlrate(priv->ieee80211->basic_rate);
- ret = rtl8192_tx(dev, skb);
-
- if( ret != 0 ){
- printk(KERN_ALERT "tx beacon packet error : %d !\n", ret);
- }
- dev_kfree_skb_any(skb);
- } else {//0x00
- //{ log the device information
- // At present, It is not implemented just now.
- //}
- }
-#endif
}
void rtl8192_irq_rx_tasklet(struct r8192_priv *priv)
---------------------------- USB_STUFF---------------------------
*****************************************************************************/
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
static int __devinit rtl8192_usb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
-#else
-static void * __devinit rtl8192_usb_probe(struct usb_device *udev,
- unsigned int ifnum,
- const struct usb_device_id *id)
-#endif
{
// unsigned long ioaddr = 0;
struct net_device *dev = NULL;
struct r8192_priv *priv= NULL;
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
struct usb_device *udev = interface_to_usbdev(intf);
-#endif
RT_TRACE(COMP_INIT, "Oops: i'm coming\n");
dev = alloc_ieee80211(sizeof(struct r8192_priv));
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)
- SET_MODULE_OWNER(dev);
-#endif
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
usb_set_intfdata(intf, dev);
SET_NETDEV_DEV(dev, &intf->dev);
-#endif
priv = ieee80211_priv(dev);
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
priv->ieee80211 = netdev_priv(dev);
-#else
- priv->ieee80211 = (struct net_device *)dev->priv;
-#endif
priv->udev=udev;
dev->netdev_ops = &rtl8192_netdev_ops;
}
RT_TRACE(COMP_INIT, "Driver probe completed1\n");
-#if 1
if(rtl8192_init(dev)!=0){
RT_TRACE(COMP_ERR, "Initialization failed");
goto fail;
}
-#endif
netif_carrier_off(dev);
netif_stop_queue(dev);
RT_TRACE(COMP_INIT, "Driver probe completed\n");
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
- return dev;
-#else
return 0;
-#endif
fail:
free_ieee80211(dev);
RT_TRACE(COMP_ERR, "wlan driver load failed\n");
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
- return NULL;
-#else
return -ENODEV;
-#endif
}
void rtl8192_cancel_deferred_work(struct r8192_priv* priv)
{
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,22)
cancel_work_sync(&priv->reset_wq);
cancel_delayed_work(&priv->watch_dog_wq);
cancel_delayed_work(&priv->update_beacon_wq);
cancel_work_sync(&priv->qos_activate);
//cancel_work_sync(&priv->SetBWModeWorkItem);
//cancel_work_sync(&priv->SwChnlWorkItem);
-#else
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
-// cancel_delayed_work(&priv->reset_wq);
- cancel_delayed_work(&priv->watch_dog_wq);
- cancel_delayed_work(&priv->update_beacon_wq);
-// cancel_delayed_work(&priv->qos_activate);
- //cancel_delayed_work(&priv->SetBWModeWorkItem);
- //cancel_delayed_work(&priv->SwChnlWorkItem);
-#endif
-#endif
}
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
static void __devexit rtl8192_usb_disconnect(struct usb_interface *intf)
-#else
-static void __devexit rtl8192_usb_disconnect(struct usb_device *udev, void *ptr)
-#endif
{
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
struct net_device *dev = usb_get_intfdata(intf);
-#else
- struct net_device *dev = (struct net_device *)ptr;
-#endif
struct r8192_priv *priv = ieee80211_priv(dev);
if(dev){
// priv->rf_close(dev);
// rtl8192_SetRFPowerState(dev, eRfOff);
rtl8192_usb_deleteendpoints(dev);
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
destroy_workqueue(priv->priv_wq);
-#endif
//rtl8192_irq_disable(dev);
//rtl8192_reset(dev);
mdelay(10);
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
struct ieee80211_device* ieee = priv->ieee80211;
SECR_value = SCR_TxEncEnable | SCR_RxDecEnable;
-#if 1
if (((KEY_TYPE_WEP40 == ieee->pairwise_key_type) || (KEY_TYPE_WEP104 == ieee->pairwise_key_type)) && (priv->ieee80211->auth_mode != 2))
{
SECR_value |= SCR_RxUseDK;
SECR_value |= SCR_RxUseDK;
SECR_value |= SCR_TxUseDK;
}
-#endif
//add HWSec active enable here.
//default using hwsec. when peer AP is in N mode only and pairwise_key_type is none_aes(which HT_IOT_ACT_PURE_N_MODE indicates it), use software security. when peer AP is in b,g,n mode mixed and pairwise_key_type is none_aes, use g mode hw security. WB on 2008.7.4
//
// Indicate different AP vendor for IOT issue.
//
-#if 0
-typedef enum _HT_IOT_PEER
-{
- HT_IOT_PEER_UNKNOWN = 0,
- HT_IOT_PEER_REALTEK = 1,
- HT_IOT_PEER_BROADCOM = 2,
- HT_IOT_PEER_RALINK = 3,
- HT_IOT_PEER_ATHEROS = 4,
- HT_IOT_PEER_CISCO = 5,
- HT_IOT_PEER_MAX = 6
-}HT_IOT_PEER_E, *PHTIOT_PEER_E;
-#endif
-#if 1
static u32 edca_setting_DL[HT_IOT_PEER_MAX] =
{ 0x5e4322, 0x5e4322, 0x5e4322, 0x604322, 0xa44f, 0x5ea44f};
static u32 edca_setting_UL[HT_IOT_PEER_MAX] =
{ 0x5e4322, 0xa44f, 0x5e4322, 0x604322, 0x5ea44f, 0x5ea44f};
-#endif
#define RTK_UL_EDCA 0xa44f
#define RTK_DL_EDCA 0x5e4322
extern void init_rate_adaptive(struct net_device *dev);
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
extern void dm_txpower_trackingcallback(struct work_struct *work);
-#else
-extern void dm_txpower_trackingcallback(struct net_device *dev);
-#endif
extern void dm_cck_txpower_adjust(struct net_device *dev,bool binch14);
extern void dm_restore_dynamic_mechanism_state(struct net_device *dev);
u32 force_value);
extern void dm_init_edca_turbo(struct net_device *dev);
extern void dm_rf_operation_test_callback(unsigned long data);
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
extern void dm_rf_pathcheck_workitemcallback(struct work_struct *work);
-#else
-extern void dm_rf_pathcheck_workitemcallback(struct net_device *dev);
-#endif
extern void dm_fsync_timer_callback(unsigned long data);
-#if 0
-extern bool dm_check_lbus_status(struct net_device *dev);
-#endif
extern void dm_check_fsync(struct net_device *dev);
extern void dm_shadow_init(struct net_device *dev);
}
// 2008.04.01
-#if 1
// For RTL819X, if pairwisekey = wep/tkip, we support only MCS0~7.
if(priv->ieee80211->GetHalfNmodeSupportByAPsHandler(dev))
targetRATR &= 0xf00fffff;
-#endif
//
// Check whether updating of RATR0 is required
//==========================
// this is only for test, should be masked
-#if 0
-{
- //UINT32 eRFPath;
- //UINT32 start_rf, end_rf;
- UINT32 curr_addr;
- //UINT32 reg_addr;
- //UINT32 reg_addr_end;
- UINT32 reg_value;
- //start_rf = RF90_PATH_A;
- //end_rf = RF90_PATH_B;//RF90_PATH_MAX;
- //reg_addr = 0x0;
- //reg_addr_end = 0x2F;
-
- for (curr_addr = 0; curr_addr < 0x2d; curr_addr++)
- {
- reg_value = PHY_QueryRFReg( Adapter, (RF90_RADIO_PATH_E)RF90_PATH_A,
- curr_addr, bMaskDWord);
- }
-
- pHalData->TXPowercount = 0;
- return;
-}
-#endif
//==========================
// read and filter out unreasonable value
priv->txpower_count = 0;
}
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
extern void dm_txpower_trackingcallback(struct work_struct *work)
{
struct delayed_work *dwork = container_of(work,struct delayed_work,work);
struct r8192_priv *priv = container_of(dwork,struct r8192_priv,txpower_tracking_wq);
struct net_device *dev = priv->ieee80211->dev;
-#else
-extern void dm_txpower_trackingcallback(struct net_device *dev)
-{
- struct r8192_priv *priv = ieee80211_priv(dev);
-#endif
#ifdef RTL8190P
dm_TXPowerTrackingCallback_TSSI(dev);
{
if((tx_power_track_counter % 30 == 0)&&(tx_power_track_counter != 0))
{
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
queue_delayed_work(priv->priv_wq,&priv->txpower_tracking_wq,0);
- #else
- #if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
- schedule_task(&priv->txpower_tracking_wq);
- #else
- queue_work(priv->priv_wq,&priv->txpower_tracking_wq);
- #endif
- #endif
}
tx_power_track_counter++;
}
{
struct r8192_priv *priv = ieee80211_priv(dev);
static u8 TM_Trigger=0;
-#if 0
- u1Byte i;
- u4Byte tmpRegA;
- for(i=0; i<50; i++)
- {
- tmpRegA = PHY_QueryRFReg(Adapter, RF90_PATH_A, 0x12, 0x078); // 0x12: RF Reg[10:7]
- PHY_SetRFReg(Adapter, RF90_PATH_A, 0x02, bMask12Bits, 0x4d);
- //delay_us(100);
- PHY_SetRFReg(Adapter, RF90_PATH_A, 0x02, bMask12Bits, 0x4f);
- //delay_us(100);
- }
- DbgPrint("Trigger and readback ThermalMeter, write RF reg0x2 = 0x4d to 0x4f for 50 times\n");
-#else
//DbgPrint("dm_CheckTXPowerTracking() \n");
if(!priv->btxpower_tracking)
return;
else
{
//DbgPrint("Schedule TxPowerTrackingWorkItem\n");
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
queue_delayed_work(priv->priv_wq,&priv->txpower_tracking_wq,0);
- #else
- #if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
- schedule_task(&priv->txpower_tracking_wq);
- #else
- queue_work(priv->priv_wq,&priv->txpower_tracking_wq);
- #endif
- #endif
TM_Trigger = 0;
}
-#endif
}
//cosa PlatformEFIOWrite4Byte(Adapter, RATR0, ((pu4Byte)(val))[0]);
write_nic_dword(dev, RATR0, ratr_value);
write_nic_byte(dev, UFWP, 1);
-#if 0 // Disable old code.
- u1Byte index;
- u4Byte input_value;
- index = (u1Byte)((((pu4Byte)(val))[0]) >> 28);
- input_value = (((pu4Byte)(val))[0]) & 0x0fffffff;
- // TODO: Correct it. Emily 2007.01.11
- PlatformEFIOWrite4Byte(Adapter, RATR0+index*4, input_value);
-#endif
}
//Resore TX Power Tracking Index
if(priv->btxpower_trackingInit && priv->btxpower_tracking){
}
}
-#if 0
-extern void dm_force_tx_fw_info(struct net_device *dev,
- u32 force_type,
- u32 force_value)
-{
- struct r8192_priv *priv = ieee80211_priv(dev);
-
- if (force_type == 0) // don't force TxSC
- {
- //DbgPrint("Set Force SubCarrier Off\n");
- priv->tx_fwinfo_force_subcarriermode = 0;
- }
- else if(force_type == 1) //force
- {
- //DbgPrint("Set Force SubCarrier On\n");
- priv->tx_fwinfo_force_subcarriermode = 1;
- if(force_value > 3)
- force_value = 3;
- priv->tx_fwinfo_force_subcarrierval = (u8)force_value;
- }
-}
-#endif
/*-----------------------------------------------------------------------------
* Function: dm_dig_init()
priv->bis_cur_rdlstate = false;
} // dm_init_edca_turbo
-#if 1
static void dm_check_edca_turbo(
struct net_device * dev)
{
// Do not be Turbo if it's under WiFi config and Qos Enabled, because the EDCA parameters
// should follow the settings from QAP. By Bruce, 2007-12-07.
//
- #if 1
if(priv->ieee80211->state != IEEE80211_LINKED)
goto dm_CheckEdcaTurbo_EXIT;
- #endif
// We do not turn on EDCA turbo mode for some AP that has IOT issue
if(priv->ieee80211->pHTInfo->IOTAction & HT_IOT_ACT_DISABLE_EDCA_TURBO)
goto dm_CheckEdcaTurbo_EXIT;
lastTxOkCnt = priv->stats.txbytesunicast;
lastRxOkCnt = priv->stats.rxbytesunicast;
} // dm_CheckEdcaTurbo
-#endif
extern void DM_CTSToSelfSetting(struct net_device * dev,u32 DM_Type, u32 DM_Value)
{
}
else //uplink
{
- #if 1
pHTInfo->IOTAction |= HT_IOT_ACT_FORCED_CTS2SELF;
- #else
- if(priv->undecorated_smoothed_pwdb < priv->ieee80211->CTSToSelfTH) // disable CTS to self
- {
- pHTInfo->IOTAction &= ~HT_IOT_ACT_FORCED_CTS2SELF;
- //DbgPrint("dm_CTSToSelf() ==> CTS to self disabled\n");
- }
- else if(priv->undecorated_smoothed_pwdb >= (priv->ieee80211->CTSToSelfTH+5)) // enable CTS to self
- {
- pHTInfo->IOTAction |= HT_IOT_ACT_FORCED_CTS2SELF;
- //DbgPrint("dm_CTSToSelf() ==> CTS to self enabled\n");
- }
- #endif
}
lastTxOkCnt = priv->stats.txbytesunicast;
}
-#if 0
-/*-----------------------------------------------------------------------------
- * Function: dm_rf_operation_test_callback()
- *
- * Overview: Only for RF operation test now.
- *
- * Input: NONE
- *
- * Output: NONE
- *
- * Return: NONE
- *
- * Revised History:
- * When Who Remark
- * 05/29/2008 amy Create Version 0 porting from windows code.
- *
- *---------------------------------------------------------------------------*/
-extern void dm_rf_operation_test_callback(unsigned long dev)
-{
-// struct r8192_priv *priv = ieee80211_priv((struct net_device *)dev);
- u8 erfpath;
-
-
- for(erfpath=0; erfpath<4; erfpath++)
- {
- //DbgPrint("Set RF-%d\n\r", eRFPath);
- //PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x2c, bMask12Bits, 0x3d7);
- udelay(100);
- }
-
- {
- //PlatformSetPeriodicTimer(Adapter, &pHalData->RfTest1Timer, 500);
- }
-
- // For test
- {
- //u8 i;
- //PlatformSetPeriodicTimer(Adapter, &pHalData->RfTest1Timer, 500);
-#if 0
- for(i=0; i<50; i++)
- {
- // Write Test
- PHY_SetRFReg(Adapter, RF90_PATH_A, 0x02, bMask12Bits, 0x4d);
- //delay_us(100);
- PHY_SetRFReg(Adapter, RF90_PATH_A, 0x02, bMask12Bits, 0x4f);
- //delay_us(100);
- PHY_SetRFReg(Adapter, RF90_PATH_C, 0x02, bMask12Bits, 0x4d);
- //delay_us(100);
- PHY_SetRFReg(Adapter, RF90_PATH_C, 0x02, bMask12Bits, 0x4f);
- //delay_us(100);
-
-#if 0
- // Read test
- PHY_QueryRFReg(Adapter, RF90_PATH_A, 0x02, bMask12Bits);
- //delay_us(100);
- PHY_QueryRFReg(Adapter, RF90_PATH_A, 0x02, bMask12Bits);
- //delay_us(100);
- PHY_QueryRFReg(Adapter, RF90_PATH_A, 0x12, bMask12Bits);
- //delay_us(100);
- PHY_QueryRFReg(Adapter, RF90_PATH_A, 0x12, bMask12Bits);
- //delay_us(100);
- PHY_QueryRFReg(Adapter, RF90_PATH_A, 0x21, bMask12Bits);
- //delay_us(100);
- PHY_QueryRFReg(Adapter, RF90_PATH_A, 0x21, bMask12Bits);
- //delay_us(100);
-#endif
- }
-#endif
- }
-
-} /* DM_RfOperationTestCallBack */
-#endif
-
/*-----------------------------------------------------------------------------
* Function: dm_check_rfctrl_gpio()
*
* 05/28/2008 amy Create Version 0 porting from windows code.
*
*---------------------------------------------------------------------------*/
-#if 1
static void dm_check_rfctrl_gpio(struct net_device * dev)
{
//struct r8192_priv *priv = ieee80211_priv(dev);
return;
#endif
#ifdef RTL8192E
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
queue_delayed_work(priv->priv_wq,&priv->gpio_change_rf_wq,0);
- #else
- #if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
- schedule_task(&priv->gpio_change_rf_wq);
- #else
- queue_work(priv->priv_wq,&priv->gpio_change_rf_wq);
- #endif
- #endif
#endif
} /* dm_CheckRfCtrlGPIO */
-#endif
/*-----------------------------------------------------------------------------
* Function: dm_check_pbc_gpio()
*
* 02/21/2008 MHC Create Version 0.
*
*---------------------------------------------------------------------------*/
- #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
extern void dm_gpio_change_rf_callback(struct work_struct *work)
{
struct delayed_work *dwork = container_of(work,struct delayed_work,work);
struct r8192_priv *priv = container_of(dwork,struct r8192_priv,gpio_change_rf_wq);
struct net_device *dev = priv->ieee80211->dev;
-#else
-extern void dm_gpio_change_rf_callback(struct net_device *dev)
-{
- struct r8192_priv *priv = ieee80211_priv(dev);
-#endif
u8 tmp1byte;
RT_RF_POWER_STATE eRfPowerStateToSet;
bool bActuallySet = false;
* 01/30/2008 MHC Create Version 0.
*
*---------------------------------------------------------------------------*/
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
extern void dm_rf_pathcheck_workitemcallback(struct work_struct *work)
{
struct delayed_work *dwork = container_of(work,struct delayed_work,work);
struct r8192_priv *priv = container_of(dwork,struct r8192_priv,rfpath_check_wq);
struct net_device *dev =priv->ieee80211->dev;
-#else
-extern void dm_rf_pathcheck_workitemcallback(struct net_device *dev)
-{
- struct r8192_priv *priv = ieee80211_priv(dev);
-#endif
//bool bactually_set = false;
u8 rfpath = 0, i;
static void dm_check_rx_path_selection(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
queue_delayed_work(priv->priv_wq,&priv->rfpath_check_wq,0);
-#else
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
- schedule_task(&priv->rfpath_check_wq);
-#else
- queue_work(priv->priv_wq,&priv->rfpath_check_wq);
-#endif
-#endif
} /* dm_CheckRxRFPath */
#endif
reg_c38_State = RegC38_NonFsync_Other_AP;
- #if 0//cosa
- if (Adapter->HardwareType == HARDWARE_TYPE_RTL8190P)
- DbgPrint("Fsync is idle, rssi<=35, write 0xc38 = 0x%x \n", 0x10);
- else
- DbgPrint("Fsync is idle, rssi<=35, write 0xc38 = 0x%x \n", 0x90);
- #endif
}
}
else if(priv->undecorated_smoothed_pwdb >= (RegC38_TH+5))
}
}
-#if 0
-/*-----------------------------------------------------------------------------
- * Function: DM_CheckLBusStatus()
- *
- * Overview: For 9x series, we must make sure LBUS is active for IO.
- *
- * Input: NONE
- *
- * Output: NONE
- *
- * Return: NONE
- *
- * Revised History:
- * When Who Remark
- * 02/22/2008 MHC Create Version 0.
- *
- *---------------------------------------------------------------------------*/
-extern s1Byte DM_CheckLBusStatus(IN PADAPTER Adapter)
-{
- PMGNT_INFO pMgntInfo=&Adapter->MgntInfo;
-
-#if (HAL_CODE_BASE & RTL819X)
-
-#if (HAL_CODE_BASE == RTL8192)
-
-#if( DEV_BUS_TYPE==PCI_INTERFACE)
- //return (pMgntInfo->bLbusEnable); // For debug only
- return TRUE;
-#endif
-
-#if( DEV_BUS_TYPE==USB_INTERFACE)
- return TRUE;
-#endif
-
-#endif // #if (HAL_CODE_BASE == RTL8192)
-
-#if (HAL_CODE_BASE == RTL8190)
- return TRUE;
-#endif // #if (HAL_CODE_BASE == RTL8190)
-
-#endif // #if (HAL_CODE_BASE & RTL819X)
-} /* DM_CheckLBusStatus */
-
-#endif
/*-----------------------------------------------------------------------------
* Function: dm_shadow_init()
// 0x1e0(byte) to botify driver.
write_nic_byte(dev, DRIVER_RSSI, (u8)priv->undecorated_smoothed_pwdb);
return;
-#if 1
tx_cmd.Op = TXCMD_SET_RX_RSSI;
tx_cmd.Length = 4;
tx_cmd.Value = priv->undecorated_smoothed_pwdb;
cmpk_message_handle_tx(dev, (u8*)&tx_cmd,
DESC_PACKET_TYPE_INIT, sizeof(DCMD_TXCMD_T));
-#endif
}
/*---------------------------Define function prototype------------------------*/
#define Initial_Tx_Rate_Reg 0x1b9
#define Tx_Retry_Count_Reg 0x1ac
#define RegC38_TH 20
-#if 0
-//----------------------------------------------------------------------------
-// 8190 Rate Adaptive Table Register (offset 0x320, 4 byte)
-//----------------------------------------------------------------------------
-
-//CCK
-#define RATR_1M 0x00000001
-#define RATR_2M 0x00000002
-#define RATR_55M 0x00000004
-#define RATR_11M 0x00000008
-//OFDM
-#define RATR_6M 0x00000010
-#define RATR_9M 0x00000020
-#define RATR_12M 0x00000040
-#define RATR_18M 0x00000080
-#define RATR_24M 0x00000100
-#define RATR_36M 0x00000200
-#define RATR_48M 0x00000400
-#define RATR_54M 0x00000800
-//MCS 1 Spatial Stream
-#define RATR_MCS0 0x00001000
-#define RATR_MCS1 0x00002000
-#define RATR_MCS2 0x00004000
-#define RATR_MCS3 0x00008000
-#define RATR_MCS4 0x00010000
-#define RATR_MCS5 0x00020000
-#define RATR_MCS6 0x00040000
-#define RATR_MCS7 0x00080000
-//MCS 2 Spatial Stream
-#define RATR_MCS8 0x00100000
-#define RATR_MCS9 0x00200000
-#define RATR_MCS10 0x00400000
-#define RATR_MCS11 0x00800000
-#define RATR_MCS12 0x01000000
-#define RATR_MCS13 0x02000000
-#define RATR_MCS14 0x04000000
-#define RATR_MCS15 0x08000000
-// ALL CCK Rate
-#define RATE_ALL_CCK RATR_1M|RATR_2M|RATR_55M|RATR_11M
-#define RATE_ALL_OFDM_AG RATR_6M|RATR_9M|RATR_12M|RATR_18M|RATR_24M\
- |RATR_36M|RATR_48M|RATR_54M
-#define RATE_ALL_OFDM_2SS RATR_MCS8|RATR_MCS9 |RATR_MCS10|RATR_MCS11| \
- RATR_MCS12|RATR_MCS13|RATR_MCS14|RATR_MCS15
-#endif
/*--------------------------Define Parameters-------------------------------*/
extern void hal_dm_watchdog(struct net_device *dev);
extern void init_rate_adaptive(struct net_device *dev);
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
extern void dm_txpower_trackingcallback(struct work_struct *work);
-#else
-extern void dm_txpower_trackingcallback(struct net_device *dev);
-#endif
extern void dm_restore_dynamic_mechanism_state(struct net_device *dev);
extern void dm_backup_dynamic_mechanism_state(struct net_device *dev);
extern void dm_change_dynamic_initgain_thresh(struct net_device *dev,
extern void dm_force_tx_fw_info(struct net_device *dev,u32 force_type, u32 force_value);
extern void dm_init_edca_turbo(struct net_device *dev);
extern void dm_rf_operation_test_callback(unsigned long data);
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
extern void dm_rf_pathcheck_workitemcallback(struct work_struct *work);
-#else
-extern void dm_rf_pathcheck_workitemcallback(struct net_device *dev);
-#endif
extern void dm_fsync_timer_callback(unsigned long data);
extern void dm_cck_txpower_adjust(struct net_device *dev,bool binch14);
-#if 0
-extern char dm_check_lbus_status(IN PADAPTER Adapter);
-#endif
extern void dm_shadow_init(struct net_device *dev);
extern void dm_initialize_txpower_tracking(struct net_device *dev);
/*--------------------------Exported Function prototype---------------------*/
BaseBand_Config_PHY_REG = 0, //Radio Path A
BaseBand_Config_AGC_TAB = 1, //Radio Path B
}BaseBand_Config_Type, *PBaseBand_Config_Type;
-#if 0
-typedef enum _RT_RF_TYPE_819xU{
- RF_TYPE_MIN = 0,
- RF_8225,
- RF_8256,
- RF_8258,
- RF_PSEUDO_11N = 4,
-}RT_RF_TYPE_819xU, *PRT_RF_TYPE_819xU;
-#endif
#define RTL8187_REQT_READ 0xc0
#define RTL8187_REQT_WRITE 0x40
#define RTL8187_REQ_GET_REGS 0x05
MAC4 = 0x004,
MAC5 = 0x005,
-#if 0
-/* 0x0006 - 0x0007 - reserved */
- RXFIFOCOUNT = 0x010,
- TXFIFOCOUNT = 0x012,
- BQREQ = 0x013,
-/* 0x0010 - 0x0017 - reserved */
- TSFTR = 0x018,
- TLPDA = 0x020,
- TNPDA = 0x024,
- THPDA = 0x028,
- BSSID = 0x02E,
- RESP_RATE = 0x034,
- CMD = 0x037,
-#define CMD_RST_SHIFT 4
-#define CMD_RESERVED_MASK ((1<<1) | (1<<5) | (1<<6) | (1<<7))
-#define CMD_RX_ENABLE_SHIFT 3
-#define CMD_TX_ENABLE_SHIFT 2
-#define CR_RST ((1<< 4))
-#define CR_RE ((1<< 3))
-#define CR_TE ((1<< 2))
-#define CR_MulRW ((1<< 0))
-
- INTA_MASK = 0x03c,
- INTA = 0x03e,
-#define INTA_TXOVERFLOW (1<<15)
-#define INTA_TIMEOUT (1<<14)
-#define INTA_BEACONTIMEOUT (1<<13)
-#define INTA_ATIM (1<<12)
-#define INTA_BEACONDESCERR (1<<11)
-#define INTA_BEACONDESCOK (1<<10)
-#define INTA_HIPRIORITYDESCERR (1<<9)
-#define INTA_HIPRIORITYDESCOK (1<<8)
-#define INTA_NORMPRIORITYDESCERR (1<<7)
-#define INTA_NORMPRIORITYDESCOK (1<<6)
-#define INTA_RXOVERFLOW (1<<5)
-#define INTA_RXDESCERR (1<<4)
-#define INTA_LOWPRIORITYDESCERR (1<<3)
-#define INTA_LOWPRIORITYDESCOK (1<<2)
-#define INTA_RXCRCERR (1<<1)
-#define INTA_RXOK (1)
- TX_CONF = 0x040,
-#define TX_CONF_HEADER_AUTOICREMENT_SHIFT 30
-#define TX_LOOPBACK_SHIFT 17
-#define TX_LOOPBACK_MAC 1
-#define TX_LOOPBACK_BASEBAND 2
-#define TX_LOOPBACK_NONE 0
-#define TX_LOOPBACK_CONTINUE 3
-#define TX_LOOPBACK_MASK ((1<<17)|(1<<18))
-#define TX_LRLRETRY_SHIFT 0
-#define TX_SRLRETRY_SHIFT 8
-#define TX_NOICV_SHIFT 19
-#define TX_NOCRC_SHIFT 16
-#define TCR_DurProcMode ((1<<30))
-#define TCR_DISReqQsize ((1<<28))
-#define TCR_HWVERID_MASK ((1<<27)|(1<<26)|(1<<25))
-#define TCR_HWVERID_SHIFT 25
-#define TCR_SWPLCPLEN ((1<<24))
-#define TCR_PLCP_LEN TCR_SAT // rtl8180
-#define TCR_MXDMA_MASK ((1<<23)|(1<<22)|(1<<21))
-#define TCR_MXDMA_1024 6
-#define TCR_MXDMA_2048 7
-#define TCR_MXDMA_SHIFT 21
-#define TCR_DISCW ((1<<20))
-#define TCR_ICV ((1<<19))
-#define TCR_LBK ((1<<18)|(1<<17))
-#define TCR_LBK1 ((1<<18))
-#define TCR_LBK0 ((1<<17))
-#define TCR_CRC ((1<<16))
-#define TCR_SRL_MASK ((1<<15)|(1<<14)|(1<<13)|(1<<12)|(1<<11)|(1<<10)|(1<<9)|(1<<8))
-#define TCR_LRL_MASK ((1<<0)|(1<<1)|(1<<2)|(1<<3)|(1<<4)|(1<<5)|(1<<6)|(1<<7))
-#define TCR_PROBE_NOTIMESTAMP_SHIFT 29 //rtl8185
- RX_CONF = 0x044,
-#define MAC_FILTER_MASK ((1<<0) | (1<<1) | (1<<2) | (1<<3) | (1<<5) | \
-(1<<12) | (1<<18) | (1<<19) | (1<<20) | (1<<21) | (1<<22) | (1<<23))
-#define RX_CHECK_BSSID_SHIFT 23
-#define ACCEPT_PWR_FRAME_SHIFT 22
-#define ACCEPT_MNG_FRAME_SHIFT 20
-#define ACCEPT_CTL_FRAME_SHIFT 19
-#define ACCEPT_DATA_FRAME_SHIFT 18
-#define ACCEPT_ICVERR_FRAME_SHIFT 12
-#define ACCEPT_CRCERR_FRAME_SHIFT 5
-#define ACCEPT_BCAST_FRAME_SHIFT 3
-#define ACCEPT_MCAST_FRAME_SHIFT 2
-#define ACCEPT_ALLMAC_FRAME_SHIFT 0
-#define ACCEPT_NICMAC_FRAME_SHIFT 1
-#define RX_FIFO_THRESHOLD_MASK ((1<<13) | (1<<14) | (1<<15))
-#define RX_FIFO_THRESHOLD_SHIFT 13
-#define RX_FIFO_THRESHOLD_128 3
-#define RX_FIFO_THRESHOLD_256 4
-#define RX_FIFO_THRESHOLD_512 5
-#define RX_FIFO_THRESHOLD_1024 6
-#define RX_FIFO_THRESHOLD_NONE 7
-#define RX_AUTORESETPHY_SHIFT 28
-#define MAX_RX_DMA_MASK ((1<<8) | (1<<9) | (1<<10))
-#define MAX_RX_DMA_2048 7
-#define MAX_RX_DMA_1024 6
-#define MAX_RX_DMA_SHIFT 10
-#define RCR_ONLYERLPKT ((1<<31))
-#define RCR_CS_SHIFT 29
-#define RCR_CS_MASK ((1<<30) | (1<<29))
-#define RCR_ENMARP ((1<<28))
-#define RCR_CBSSID ((1<<23))
-#define RCR_APWRMGT ((1<<22))
-#define RCR_ADD3 ((1<<21))
-#define RCR_AMF ((1<<20))
-#define RCR_ACF ((1<<19))
-#define RCR_ADF ((1<<18))
-#define RCR_RXFTH ((1<<15)|(1<<14)|(1<<13))
-#define RCR_RXFTH2 ((1<<15))
-#define RCR_RXFTH1 ((1<<14))
-#define RCR_RXFTH0 ((1<<13))
-#define RCR_AICV ((1<<12))
-#define RCR_MXDMA ((1<<10)|(1<< 9)|(1<< 8))
-#define RCR_MXDMA2 ((1<<10))
-#define RCR_MXDMA1 ((1<< 9))
-#define RCR_MXDMA0 ((1<< 8))
-#define RCR_9356SEL ((1<< 6))
-#define RCR_ACRC32 ((1<< 5))
-#define RCR_AB ((1<< 3))
-#define RCR_AM ((1<< 2))
-#define RCR_APM ((1<< 1))
-#define RCR_AAP ((1<< 0))
- INT_TIMEOUT = 0x048,
- TX_BEACON_RING_ADDR = 0x04c,
- EPROM_CMD = 0x58,
-#define EPROM_CMD_RESERVED_MASK ((1<<5)|(1<<4))
-#define EPROM_CMD_OPERATING_MODE_SHIFT 6
-#define EPROM_CMD_OPERATING_MODE_MASK ((1<<7)|(1<<6))
-#define EPROM_CMD_CONFIG 0x3
-#define EPROM_CMD_NORMAL 0
-#define EPROM_CMD_LOAD 1
-#define EPROM_CMD_PROGRAM 2
-#define EPROM_CS_SHIFT 3
-#define EPROM_CK_SHIFT 2
-#define EPROM_W_SHIFT 1
-#define EPROM_R_SHIFT 0
- CONFIG0 = 0x051,
-#define CONFIG0_WEP104 ((1<<6))
-#define CONFIG0_LEDGPO_En ((1<<4))
-#define CONFIG0_Aux_Status ((1<<3))
-#define CONFIG0_GL ((1<<1)|(1<<0))
-#define CONFIG0_GL1 ((1<<1))
-#define CONFIG0_GL0 ((1<<0))
- CONFIG1 = 0x052,
-#define CONFIG1_LEDS ((1<<7)|(1<<6))
-#define CONFIG1_LEDS1 ((1<<7))
-#define CONFIG1_LEDS0 ((1<<6))
-#define CONFIG1_LWACT ((1<<4))
-#define CONFIG1_MEMMAP ((1<<3))
-#define CONFIG1_IOMAP ((1<<2))
-#define CONFIG1_VPD ((1<<1))
-#define CONFIG1_PMEn ((1<<0))
- CONFIG2 = 0x053,
-#define CONFIG2_LCK ((1<<7))
-#define CONFIG2_ANT ((1<<6))
-#define CONFIG2_DPS ((1<<3))
-#define CONFIG2_PAPE_sign ((1<<2))
-#define CONFIG2_PAPE_time ((1<<1)|(1<<0))
-#define CONFIG2_PAPE_time1 ((1<<1))
-#define CONFIG2_PAPE_time0 ((1<<0))
- ANA_PARAM = 0x054,
- CONFIG3 = 0x059,
-#define CONFIG3_GNTSel ((1<<7))
-#define CONFIG3_PARM_En ((1<<6))
-#define CONFIG3_Magic ((1<<5))
-#define CONFIG3_CardB_En ((1<<3))
-#define CONFIG3_CLKRUN_En ((1<<2))
-#define CONFIG3_FuncRegEn ((1<<1))
-#define CONFIG3_FBtbEn ((1<<0))
-#define CONFIG3_CLKRUN_SHIFT 2
-#define CONFIG3_ANAPARAM_W_SHIFT 6
- CONFIG4 = 0x05a,
-#define CONFIG4_VCOPDN ((1<<7))
-#define CONFIG4_PWROFF ((1<<6))
-#define CONFIG4_PWRMGT ((1<<5))
-#define CONFIG4_LWPME ((1<<4))
-#define CONFIG4_LWPTN ((1<<2))
-#define CONFIG4_RFTYPE ((1<<1)|(1<<0))
-#define CONFIG4_RFTYPE1 ((1<<1))
-#define CONFIG4_RFTYPE0 ((1<<0))
- TESTR = 0x05b,
-#define TFPC_AC 0x05C
-
-#define SCR 0x05F
- PGSELECT = 0x05e,
-#define PGSELECT_PG_SHIFT 0
- SECURITY = 0x05f,
-#define SECURITY_WEP_TX_ENABLE_SHIFT 1
-#define SECURITY_WEP_RX_ENABLE_SHIFT 0
-#define SECURITY_ENCRYP_104 1
-#define SECURITY_ENCRYP_SHIFT 4
-#define SECURITY_ENCRYP_MASK ((1<<4)|(1<<5))
- ANA_PARAM2 = 0x060,
- BEACON_INTERVAL = 0x070,
-#define BEACON_INTERVAL_MASK ((1<<0)|(1<<1)|(1<<2)|(1<<3)|(1<<4)|(1<<5)| \
-(1<<6)|(1<<7)|(1<<8)|(1<<9))
- ATIM_WND = 0x072,
-#define ATIM_WND_MASK (0x01FF)
- BCN_INTR_ITV = 0x074,
-#define BCN_INTR_ITV_MASK (0x01FF)
- ATIM_INTR_ITV = 0x076,
-#define ATIM_INTR_ITV_MASK (0x01FF)
- AckTimeOutReg = 0x079, //ACK timeout register, in unit of 4 us.
- PHY_ADR = 0x07c,
- PHY_READ = 0x07e,
- RFPinsOutput = 0x080,
- RFPinsEnable = 0x082,
-
-//Page 0
- RFPinsSelect = 0x084,
-#define SW_CONTROL_GPIO 0x400
- RFPinsInput = 0x086,
- RF_PARA = 0x088,
- RF_TIMING = 0x08c,
- GP_ENABLE = 0x090,
- GPIO = 0x091,
- TX_AGC_CTL = 0x09c,
-#define TX_AGC_CTL_PER_PACKET_TXAGC 0x01
-#define TX_AGC_CTL_PERPACKET_GAIN_SHIFT 0
-#define TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT 1
-#define TX_AGC_CTL_FEEDBACK_ANT 2
-#define TXAGC_CTL_PER_PACKET_ANT_SEL 0x02
- OFDM_TXAGC = 0x09e,
- ANTSEL = 0x09f,
- WPA_CONFIG = 0x0b0,
- SIFS = 0x0b4,
- DIFS = 0x0b5,
- SLOT = 0x0b6,
- CW_CONF = 0x0bc,
-#define CW_CONF_PERPACKET_RETRY_LIMIT 0x02
-#define CW_CONF_PERPACKET_CW 0x01
-#define CW_CONF_PERPACKET_RETRY_SHIFT 1
-#define CW_CONF_PERPACKET_CW_SHIFT 0
- CW_VAL = 0x0bd,
- RATE_FALLBACK = 0x0be,
-#define MAX_RESP_RATE_SHIFT 4
-#define MIN_RESP_RATE_SHIFT 0
-#define RATE_FALLBACK_CTL_ENABLE 0x80
-#define RATE_FALLBACK_CTL_AUTO_STEP0 0x00
- ACM_CONTROL = 0x0BF, // ACM Control Registe
-//----------------------------------------------------------------------------
-// 8187B ACM_CONTROL bits (Offset 0xBF, 1 Byte)
-//----------------------------------------------------------------------------
-#define VOQ_ACM_EN (0x01 << 7) //BIT7
-#define VIQ_ACM_EN (0x01 << 6) //BIT6
-#define BEQ_ACM_EN (0x01 << 5) //BIT5
-#define ACM_HW_EN (0x01 << 4) //BIT4
-#define TXOPSEL (0x01 << 3) //BIT3
-#define VOQ_ACM_CTL (0x01 << 2) //BIT2 // Set to 1 when AC_VO used time reaches or exceeds the admitted time
-#define VIQ_ACM_CTL (0x01 << 1) //BIT1 // Set to 1 when AC_VI used time reaches or exceeds the admitted time
-#define BEQ_ACM_CTL (0x01 << 0) //BIT0 // Set to 1 when AC_BE used time reaches or exceeds the admitted time
- CONFIG5 = 0x0D8,
-#define CONFIG5_TX_FIFO_OK ((1<<7))
-#define CONFIG5_RX_FIFO_OK ((1<<6))
-#define CONFIG5_CALON ((1<<5))
-#define CONFIG5_EACPI ((1<<2))
-#define CONFIG5_LANWake ((1<<1))
-#define CONFIG5_PME_STS ((1<<0))
- TX_DMA_POLLING = 0x0d9,
-#define TX_DMA_POLLING_BEACON_SHIFT 7
-#define TX_DMA_POLLING_HIPRIORITY_SHIFT 6
-#define TX_DMA_POLLING_NORMPRIORITY_SHIFT 5
-#define TX_DMA_POLLING_LOWPRIORITY_SHIFT 4
-#define TX_DMA_STOP_BEACON_SHIFT 3
-#define TX_DMA_STOP_HIPRIORITY_SHIFT 2
-#define TX_DMA_STOP_NORMPRIORITY_SHIFT 1
-#define TX_DMA_STOP_LOWPRIORITY_SHIFT 0
- CWR = 0x0DC,
- RetryCTR = 0x0DE,
- INT_MIG = 0x0E2, // Interrupt Migration (0xE2 ~ 0xE3)
- TID_AC_MAP = 0x0E8, // TID to AC Mapping Register
- ANA_PARAM3 = 0x0EE,
-
-
-//page 1
- Wakeup0 = 0x084,
- Wakeup1 = 0x08C,
- Wakeup2LD = 0x094,
- Wakeup2HD = 0x09C,
- Wakeup3LD = 0x0A4,
- Wakeup3HD = 0x0AC,
- Wakeup4LD = 0x0B4,
- Wakeup4HD = 0x0BC,
- CRC0 = 0x0C4,
- CRC1 = 0x0C6,
- CRC2 = 0x0C8,
- CRC3 = 0x0CA,
- CRC4 = 0x0CC,
-/* 0x00CE - 0x00D3 - reserved */
-
- RFSW_CTRL = 0x272, // 0x272-0x273.
-
-//Reg Diff between rtl8187 and rtl8187B
-/**************************************************************************/
- BRSR_8187 = 0x02C,
- BRSR_8187B = 0x034,
-#define BRSR_BPLCP ((1<< 8))
-#define BRSR_MBR ((1<< 1)|(1<< 0))
-#define BRSR_MBR_8185 ((1<< 11)|(1<< 10)|(1<< 9)|(1<< 8)|(1<< 7)|(1<< 6)|(1<< 5)|(1<< 4)|(1<< 3)|(1<< 2)|(1<< 1)|(1<< 0))
-#define BRSR_MBR0 ((1<< 0))
-#define BRSR_MBR1 ((1<< 1))
-
-/**************************************************************************/
- EIFS_8187 = 0x035,
- EIFS_8187B = 0x02D,
-
-/**************************************************************************/
- FER = 0x0F0,
- FEMR = 0x0F4,
- FPSR = 0x0F8,
- FFER = 0x0FC,
-
- AC_VO_PARAM = 0x0F0, // AC_VO Parameters Record
- AC_VI_PARAM = 0x0F4, // AC_VI Parameters Record
- AC_BE_PARAM = 0x0F8, // AC_BE Parameters Record
- AC_BK_PARAM = 0x0FC, // AC_BK Parameters Record
- TALLY_SEL = 0x0fc,
-//----------------------------------------------------------------------------
-// 8187B AC_XX_PARAM bits
-//----------------------------------------------------------------------------
-#define AC_PARAM_TXOP_LIMIT_OFFSET 16
-#define AC_PARAM_ECW_MAX_OFFSET 12
-#define AC_PARAM_ECW_MIN_OFFSET 8
-#define AC_PARAM_AIFS_OFFSET 0
-
-#endif
};
//----------------------------------------------------------------------------
// 818xB AnaParm & AnaParm2 Register
}
-#if 0
-
-static int r8192_wx_set_beaconinterval(struct net_device *dev, struct iw_request_info *aa,
- union iwreq_data *wrqu, char *b)
-{
- int *parms = (int *)b;
- int bi = parms[0];
-
- struct r8192_priv *priv = ieee80211_priv(dev);
-
- down(&priv->wx_sem);
- DMESG("setting beacon interval to %x",bi);
-
- priv->ieee80211->beacon_interval=bi;
- rtl8180_commit(dev);
- up(&priv->wx_sem);
-
- return 0;
-}
-
-
-static int r8192_wx_set_forceassociate(struct net_device *dev, struct iw_request_info *aa,
- union iwreq_data *wrqu, char *extra)
-{
- struct r8192_priv *priv=ieee80211_priv(dev);
- int *parms = (int *)extra;
-
- priv->ieee80211->force_associate = (parms[0] > 0);
-
-
- return 0;
-}
-
-#endif
static int r8192_wx_get_mode(struct net_device *dev, struct iw_request_info *a,
union iwreq_data *wrqu, char *b)
{
{
struct r8192_priv *priv = ieee80211_priv(dev);
u8 databb;
-#if 0
- int i;
- for(i=0;i<12;i++) printk("%8x\n", read_cam(dev, i) );
-#endif
down(&priv->wx_sem);
#endif
-#if 0
-static int r8192_wx_null(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- return 0;
-}
-#endif
static int r8192_wx_force_reset(struct net_device *dev,
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
}
#if (WIRELESS_EXT >= 18)
-#if 0
-static int r8192_wx_get_enc_ext(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- struct r8192_priv *priv = ieee80211_priv(dev);
- int ret = 0;
- ret = ieee80211_wx_get_encode_ext(priv->ieee80211, info, wrqu, extra);
- return ret;
-}
-#endif
//hw security need to reorganized.
static int r8192_wx_set_enc_ext(struct net_device *dev,
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
int ret=0;
- #if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
struct r8192_priv *priv = ieee80211_priv(dev);
struct ieee80211_device* ieee = priv->ieee80211;
//printk("===>%s()\n", __FUNCTION__);
u32 key[4] = {0};
struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
struct iw_point *encoding = &wrqu->encoding;
-#if 0
- static u8 CAM_CONST_ADDR[4][6] = {
- {0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
- {0x00, 0x00, 0x00, 0x00, 0x00, 0x01},
- {0x00, 0x00, 0x00, 0x00, 0x00, 0x02},
- {0x00, 0x00, 0x00, 0x00, 0x00, 0x03}};
-#endif
u8 idx = 0, alg = 0, group = 0;
if ((encoding->flags & IW_ENCODE_DISABLED) ||
ext->alg == IW_ENCODE_ALG_NONE) //none is not allowed to use hwsec WB 2008.07.01
end_hw_sec:
up(&priv->wx_sem);
-#endif
return ret;
}
union iwreq_data *data, char *extra)
{
int ret=0;
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
//printk("====>%s()\n", __FUNCTION__);
struct r8192_priv *priv = ieee80211_priv(dev);
down(&priv->wx_sem);
ret = ieee80211_wx_set_auth(priv->ieee80211, info, &(data->param), extra);
up(&priv->wx_sem);
-#endif
return ret;
}
//printk("====>%s()\n", __FUNCTION__);
int ret=0;
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
struct r8192_priv *priv = ieee80211_priv(dev);
down(&priv->wx_sem);
ret = ieee80211_wx_set_mlme(priv->ieee80211, info, wrqu, extra);
up(&priv->wx_sem);
-#endif
return ret;
}
#endif
{
//printk("====>%s(), len:%d\n", __FUNCTION__, data->length);
int ret=0;
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
struct r8192_priv *priv = ieee80211_priv(dev);
down(&priv->wx_sem);
-#if 1
ret = ieee80211_wx_set_gen_ie(priv->ieee80211, extra, data->data.length);
-#endif
up(&priv->wx_sem);
//printk("<======%s(), ret:%d\n", __FUNCTION__, ret);
-#endif
return ret;
wstats->qual.qual = 0;
wstats->qual.level = 0;
wstats->qual.noise = 0;
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,14))
wstats->qual.updated = IW_QUAL_ALL_UPDATED | IW_QUAL_DBM;
-#else
- wstats->qual.updated = 0x0f;
-#endif
return wstats;
}
wstats->qual.level = tmp_level;
wstats->qual.qual = tmp_qual;
wstats->qual.noise = tmp_noise;
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,14))
wstats->qual.updated = IW_QUAL_ALL_UPDATED| IW_QUAL_DBM;
-#else
- wstats->qual.updated = 0x0f;
-#endif
return wstats;
}
//#endif
/* It seems that FW use big endian(MIPS) and DRV use little endian in
windows OS. So we have to read the content byte by byte or transfer
endian type before copy the message copy. */
-#if 0 // The TX FEEDBACK packet element address
- //rx_tx_fb.Element_ID = pMsg[0];
- //rx_tx_fb.Length = pMsg[1];
- rx_tx_fb.TOK = pMsg[2]>>7;
- rx_tx_fb.Fail_Reason = (pMsg[2] & 0x70) >> 4;
- rx_tx_fb.TID = (pMsg[2] & 0x0F);
- rx_tx_fb.Qos_Pkt = pMsg[3] >> 7;
- rx_tx_fb.Bandwidth = (pMsg[3] & 0x40) >> 6;
- rx_tx_fb.Retry_Cnt = pMsg[5];
- rx_tx_fb.Pkt_ID = (pMsg[6] << 8) | pMsg[7];
- rx_tx_fb.Seq_Num = (pMsg[8] << 8) | pMsg[9];
- rx_tx_fb.S_Rate = pMsg[10];
- rx_tx_fb.F_Rate = pMsg[11];
- rx_tx_fb.S_RTS_Rate = pMsg[12];
- rx_tx_fb.F_RTS_Rate = pMsg[13];
- rx_tx_fb.pkt_length = (pMsg[14] << 8) | pMsg[15];
-#endif
/* 2007/07/05 MH Use pointer to transfer structure memory. */
//memcpy((UINT8 *)&rx_tx_fb, pMsg, sizeof(CMPK_TXFB_T));
memcpy((u8*)&rx_tx_fb, pmsg, sizeof(cmpk_txfb_t));
/* 2. Use tx feedback info to count TX statistics. */
cmpk_count_txstatistic(dev, &rx_tx_fb);
-#if 0
- /* 2007/07/11 MH Assign current operate rate. */
- if (pAdapter->RegWirelessMode == WIRELESS_MODE_A ||
- pAdapter->RegWirelessMode == WIRELESS_MODE_B ||
- pAdapter->RegWirelessMode == WIRELESS_MODE_G)
- {
- pMgntInfo->CurrentOperaRate = (rx_tx_fb.F_Rate & 0x7F);
- }
- else if (pAdapter->RegWirelessMode == WIRELESS_MODE_N_24G ||
- pAdapter->RegWirelessMode == WIRELESS_MODE_N_5G)
- {
- pMgntInfo->HTCurrentOperaRate = (rx_tx_fb.F_Rate & 0x8F);
- }
-#endif
/* 2007/01/17 MH Comment previous method for TX statistic function. */
/* Collect info TX feedback packet to fill TCB. */
/* We can not know the packet length and transmit type: broadcast or uni
#define ISR_TxBcnErr BIT26 // Transmit Beacon Error
#define ISR_BcnTimerIntr BIT13 // Beacon Timer Interrupt
-#if 0
-/* Define packet type. */
-typedef enum tag_packet_type
-{
- PACKET_BROADCAST,
- PACKET_MULTICAST,
- PACKET_UNICAST,
- PACKET_TYPE_MAX
-}cmpk_pkt_type_e;
-#endif
/* Define element ID of command packet. */
#include "r8192U_hw.h"
#include "r819xU_firmware_img.h"
#include "r819xU_firmware.h"
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
#include <linux/firmware.h>
-#endif
void firmware_init_param(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
return rt_status;
-#if 0
-cmdsend_downloadcode_fail:
- rt_status = false;
- RT_TRACE(COMP_ERR, "CmdSendDownloadCode fail !!\n");
- return rt_status;
-#endif
}
bool
return rtStatus;
}
-#if 0
-/*
- * Procedure : Download code into IMEM or DMEM
- * Description: This routine will intialize firmware. If any error occurs during the initialization
- * process, the routine shall terminate immediately and return fail.
- * The routine copy virtual address get from opening of file into shared memory
- * allocated during initialization. If code size larger than a conitneous shared
- * memory may contain, the code should be divided into several section.
- * !!!NOTES This finction should only be called during MPInitialization because
- * A NIC driver should call NdisOpenFile only from MiniportInitialize.
- * Arguments : The pointer of the adapter
- * Code address (Virtual address, should fill descriptor with physical address)
- * Code size
- * Returns :
- * RT_STATUS_FAILURE - the following initialization process should be terminated
- * RT_STATUS_SUCCESS - if firmware initialization process success
- */
-bool fwsend_download_code(struct net_device *dev)
-{
- struct r8192_priv *priv = ieee80211_priv(dev);
- rt_firmware *pfirmware = (rt_firmware*)(&priv->firmware);
-
- bool rt_status = true;
- u16 length = 0;
- u16 offset = 0;
- u16 frag_threhold;
- bool last_init_packet = false;
- u32 check_txcmdwait_queueemptytime = 100000;
- u16 cmd_buf_len;
- u8 *ptr_cmd_buf;
-
- /* reset to 0 for first segment of img download */
- pfirmware->firmware_seg_index = 1;
-
- if(pfirmware->firmware_seg_index == pfirmware->firmware_seg_maxnum) {
- last_init_packet = 1;
- }
-
- cmd_buf_len = pfirmware->firmware_seg_container[pfirmware->firmware_seg_index-1].seg_size;
- ptr_cmd_buf = pfirmware->firmware_seg_container[pfirmware->firmware_seg_index-1].seg_ptr;
- rtl819xU_tx_cmd(dev, ptr_cmd_buf, cmd_buf_len, last_init_packet, DESC_PACKET_TYPE_INIT);
-
- rt_status = true;
- return rt_status;
-}
-#endif
//-----------------------------------------------------------------------------
// Procedure: Check whether main code is download OK. If OK, turn on CPU
* Download boot, main, and data image for System reset.
* Download data image for firmware reseta
*/
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
- priv->firmware_source = FW_SOURCE_HEADER_FILE;
-#else
priv->firmware_source = FW_SOURCE_IMG_FILE;
-#endif
for(init_step = starting_state; init_step <= FW_INIT_STEP2_DATA; init_step++) {
/*
* Open Image file, and map file to contineous memory if open file success.
if(rst_opt == OPT_SYSTEM_RESET) {
switch(priv->firmware_source) {
case FW_SOURCE_IMG_FILE:
- #if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
rc = request_firmware(&fw_entry, fw_name[init_step],&priv->udev->dev);
if(rc < 0 ) {
RT_TRACE(COMP_ERR, "request firmware fail!\n");
#endif
}
pfirmware->firmware_buf_size = file_length;
- #endif
break;
case FW_SOURCE_HEADER_FILE:
* and Tx descriptor info
* */
rt_status = fw_download_code(dev,mapped_file,file_length);
- #if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
if(rst_opt == OPT_SYSTEM_RESET) {
release_firmware(fw_entry);
}
- #endif
if(rt_status != TRUE) {
goto download_firmware_fail;
}
-#if 0
-/*
- * Procedure: (1) Transform firmware code from little endian to big endian if required.
- * (2) Number of bytes in Firmware downloading should be multiple
- * of 4 bytes. If length is not multiple of 4 bytes, appending of zeros is required
- *
- */
-void CmdAppendZeroAndEndianTransform(
- u1Byte *pDst,
- u1Byte *pSrc,
- u2Byte *pLength)
-{
- u2Byte ulAppendBytes = 0, i;
- u2Byte ulLength = *pLength;
-//test only
- //memset(pDst, 0xcc, 12);
- /* Transform from little endian to big endian */
-//#if DEV_BUS_TYPE==PCI_INTERFACE
-#if 0
- for( i=0 ; i<(*pLength) ; i+=4)
- {
- if((i+3) < (*pLength)) pDst[i+0] = pSrc[i+3];
- if((i+2) < (*pLength)) pDst[i+1] = pSrc[i+2];
- if((i+1) < (*pLength)) pDst[i+2] = pSrc[i+1];
- if((i+0) < (*pLength)) pDst[i+3] = pSrc[i+0];
- }
-#else
- pDst += USB_HWDESC_HEADER_LEN;
- ulLength -= USB_HWDESC_HEADER_LEN;
-
- for( i=0 ; i<ulLength ; i+=4) {
- if((i+3) < ulLength) pDst[i+0] = pSrc[i+3];
- if((i+2) < ulLength) pDst[i+1] = pSrc[i+2];
- if((i+1) < ulLength) pDst[i+2] = pSrc[i+1];
- if((i+0) < ulLength) pDst[i+3] = pSrc[i+0];
-
- }
-#endif
-
- //1(2) Append Zero
- if( ((*pLength) % 4) >0)
- {
- ulAppendBytes = 4-((*pLength) % 4);
-
- for(i=0 ; i<ulAppendBytes; i++)
- pDst[ 4*((*pLength)/4) + i ] = 0x0;
-
- *pLength += ulAppendBytes;
- }
-}
-#endif
-
-#if 0
-RT_STATUS
-CmdSendPacket(
- PADAPTER Adapter,
- PRT_TCB pTcb,
- PRT_TX_LOCAL_BUFFER pBuf,
- u4Byte BufferLen,
- u4Byte PacketType,
- BOOLEAN bLastInitPacket
- )
-{
- s2Byte i;
- u1Byte QueueID;
- u2Byte firstDesc,curDesc = 0;
- u2Byte FragIndex=0, FragBufferIndex=0;
-
- RT_STATUS rtStatus = RT_STATUS_SUCCESS;
-
- CmdInitTCB(Adapter, pTcb, pBuf, BufferLen);
-
-
- if(CmdCheckFragment(Adapter, pTcb, pBuf))
- CmdFragmentTCB(Adapter, pTcb);
- else
- pTcb->FragLength[0] = (u2Byte)pTcb->BufferList[0].Length;
-
- QueueID=pTcb->SpecifiedQueueID;
-#if DEV_BUS_TYPE!=USB_INTERFACE
- firstDesc=curDesc=Adapter->NextTxDescToFill[QueueID];
-#endif
-#if DEV_BUS_TYPE!=USB_INTERFACE
- if(VacancyTxDescNum(Adapter, QueueID) > pTcb->BufferCount)
-#else
- if(PlatformIsTxQueueAvailable(Adapter, QueueID, pTcb->BufferCount) &&
- RTIsListEmpty(&Adapter->TcbWaitQueue[QueueID]))
-#endif
- {
- pTcb->nDescUsed=0;
-
- for(i=0 ; i<pTcb->BufferCount ; i++)
- {
- Adapter->HalFunc.TxFillCmdDescHandler(
- Adapter,
- pTcb,
- QueueID, //QueueIndex
- curDesc, //index
- FragBufferIndex==0, //bFirstSeg
- FragBufferIndex==(pTcb->FragBufCount[FragIndex]-1), //bLastSeg
- pTcb->BufferList[i].VirtualAddress, //VirtualAddress
- pTcb->BufferList[i].PhysicalAddressLow, //PhyAddressLow
- pTcb->BufferList[i].Length, //BufferLen
- i!=0, //bSetOwnBit
- (i==(pTcb->BufferCount-1)) && bLastInitPacket, //bLastInitPacket
- PacketType, //DescPacketType
- pTcb->FragLength[FragIndex] //PktLen
- );
-
- if(FragBufferIndex==(pTcb->FragBufCount[FragIndex]-1))
- { // Last segment of the fragment.
- pTcb->nFragSent++;
- }
-
- FragBufferIndex++;
- if(FragBufferIndex==pTcb->FragBufCount[FragIndex])
- {
- FragIndex++;
- FragBufferIndex=0;
- }
-
-#if DEV_BUS_TYPE!=USB_INTERFACE
- curDesc=(curDesc+1)%Adapter->NumTxDesc[QueueID];
-#endif
- pTcb->nDescUsed++;
- }
-
-#if DEV_BUS_TYPE!=USB_INTERFACE
- RTInsertTailList(&Adapter->TcbBusyQueue[QueueID], &pTcb->List);
- IncrementTxDescToFill(Adapter, QueueID, pTcb->nDescUsed);
- Adapter->HalFunc.SetTxDescOWNHandler(Adapter, QueueID, firstDesc);
- // TODO: should call poll use QueueID
- Adapter->HalFunc.TxPollingHandler(Adapter, TXCMD_QUEUE);
-#endif
- }
- else
-#if DEV_BUS_TYPE!=USB_INTERFACE
- goto CmdSendPacket_Fail;
-#else
- {
- pTcb->bLastInitPacket = bLastInitPacket;
- RTInsertTailList(&Adapter->TcbWaitQueue[pTcb->SpecifiedQueueID], &pTcb->List);
- }
-#endif
-
- return rtStatus;
-
-#if DEV_BUS_TYPE!=USB_INTERFACE
-CmdSendPacket_Fail:
- rtStatus = RT_STATUS_FAILURE;
- return rtStatus;
-#endif
-
-}
-#endif
-
-
-
-
-#if 0
-RT_STATUS
-FWSendNullPacket(
- IN PADAPTER Adapter,
- IN u4Byte Length
-)
-{
- RT_STATUS rtStatus = RT_STATUS_SUCCESS;
-
-
- PRT_TCB pTcb;
- PRT_TX_LOCAL_BUFFER pBuf;
- BOOLEAN bLastInitPacket = FALSE;
-
- PlatformAcquireSpinLock(Adapter, RT_TX_SPINLOCK);
-
-#if DEV_BUS_TYPE==USB_INTERFACE
- Length += USB_HWDESC_HEADER_LEN;
-#endif
-
- //Get TCB and local buffer from common pool. (It is shared by CmdQ, MgntQ, and USB coalesce DataQ)
- if(MgntGetBuffer(Adapter, &pTcb, &pBuf))
- {
- PlatformZeroMemory(pBuf->Buffer.VirtualAddress, Length);
- rtStatus = CmdSendPacket(Adapter, pTcb, pBuf, Length, DESC_PACKET_TYPE_INIT, bLastInitPacket); //0 : always set LastInitPacket to zero
-//#if HAL_CODE_BASE != RTL8190HW
-// // TODO: for test only
-// ReturnTCB(Adapter, pTcb, RT_STATUS_SUCCESS);
-//#endif
- if(rtStatus == RT_STATUS_FAILURE)
- goto CmdSendNullPacket_Fail;
- }else
- goto CmdSendNullPacket_Fail;
-
- PlatformReleaseSpinLock(Adapter, RT_TX_SPINLOCK);
- return rtStatus;
-
-
-CmdSendNullPacket_Fail:
- PlatformReleaseSpinLock(Adapter, RT_TX_SPINLOCK);
- rtStatus = RT_STATUS_FAILURE;
- RT_ASSERT(rtStatus == RT_STATUS_SUCCESS, ("CmdSendDownloadCode fail !!\n"));
- return rtStatus;
-}
-#endif
OPT_FIRMWARE_RESET = 1,
}opt_rst_type_e;
-#if 0
-/* CPU related */
-RT_STATUS
-CPUCheckMainCodeOKAndTurnOnCPU(
- IN PADAPTER Adapter
- );
-
-RT_STATUS
-CPUCheckFirmwareReady(
- IN PADAPTER Adapter
- );
-
-/* Firmware related */
-VOID
-FWInitializeParameters(
- IN PADAPTER Adapter
- );
-
-RT_STATUS
-FWSendDownloadCode(
- IN PADAPTER Adapter,
- IN pu1Byte CodeVirtualAddrress,
- IN u4Byte BufferLen
- );
-
-RT_STATUS
-FWSendNullPacket(
- IN PADAPTER Adapter,
- IN u4Byte Length
- );
-
-RT_STATUS
-CmdSendPacket(
- PADAPTER Adapter,
- PRT_TCB pTcb,
- PRT_TX_LOCAL_BUFFER pBuf,
- u4Byte BufferLen,
- u4Byte PacketType,
- BOOLEAN bLastInitPacket
- );
-#endif
#endif
switch( eRFPowerState )
{
case eRfOn:
-#if 0
- rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4, 0x1); // 0x860[4]
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0x300, 0x3); // 0x88c[4]
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x60, 0x3); // 0x880[6:5]
- rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0xf, 0x3); // 0xc04[3:0]
- rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0xf, 0x3); // 0xd04[3:0]
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter2, 0x7000, 0x3); // 0x884[14:12]
- // for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
- // PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x2);
-
- //SwChnl(Adapter->ChannelID);
-#endif
//RF-A, RF-B
//enable RF-Chip A/B
rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4, 0x1); // 0x860[4]
break;
case eRfOff:
-#if 0
- rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4, 0x0); // 0x860[4]
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0x300, 0x0); // 0x88c[4]
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x60, 0x0); // 0x880[6:5]
- rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0xf, 0); // 0xc04[3:0]
- rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0xf, 0); // 0xd04[3:0]
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter2, 0x7000, 0x0); // 0x884[14:12]
- // for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
- // PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0);
-#endif
//RF-A, RF-B
//disable RF-Chip A/B
rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4, 0x0); // 0x860[4]
rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00100000, 1);
// Correct the tx power for CCK rate in 20M. Suggest by YN, 20071207
-#if 0
- write_nic_dword(dev, rCCK0_TxFilter1, 0x1a1b0000);
- write_nic_dword(dev, rCCK0_TxFilter2, 0x090e1317);
- write_nic_dword(dev, rCCK0_DebugPort, 0x00000204);
-#endif
priv->cck_present_attentuation =
priv->cck_present_attentuation_20Mdefault + priv->cck_present_attentuation_difference;
rtl8192_setBBreg(dev, rCCK0_System, bCCKSideBand, (priv->nCur40MhzPrimeSC>>1));
rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00100000, 0);
rtl8192_setBBreg(dev, rOFDM1_LSTF, 0xC00, priv->nCur40MhzPrimeSC);
-#if 0
- // Correct the tx power for CCK rate in 40M. Suggest by YN, 20071207
- write_nic_dword(dev, rCCK0_TxFilter1, 0x35360000);
- write_nic_dword(dev, rCCK0_TxFilter2, 0x121c252e);
- write_nic_dword(dev, rCCK0_DebugPort, 0x00000409);
-#endif
priv->cck_present_attentuation =
priv->cck_present_attentuation_40Mdefault + priv->cck_present_attentuation_difference;
}
//Skip over setting of J-mode in BB register here. Default value is "None J mode". Emily 20070315
-#if 1
//<3>Set RF related register
switch( priv->rf_chip )
{
RT_TRACE(COMP_ERR, "Unknown RFChipID: %d\n", priv->rf_chip);
break;
}
-#endif
priv->SetBWModeInProgress= false;
RT_TRACE(COMP_SWBW, "<==SetBWMode819xUsb(), %d", atomic_read(&(priv->ieee80211->atm_swbw)) );
if(priv->up)
{
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
queue_delayed_work(priv->priv_wq,&priv->initialgain_operate_wq,0);
- #else
- #if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
- schedule_task(&priv->initialgain_operate_wq);
- #else
- queue_work(priv->priv_wq,&priv->initialgain_operate_wq);
- #endif
- #endif
}
}
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
extern void InitialGainOperateWorkItemCallBack(struct work_struct *work)
{
struct delayed_work *dwork = container_of(work,struct delayed_work,work);
struct r8192_priv *priv = container_of(dwork,struct r8192_priv,initialgain_operate_wq);
struct net_device *dev = priv->ieee80211->dev;
-#else
-extern void InitialGainOperateWorkItemCallBack(struct net_device *dev)
-{
- struct r8192_priv *priv = ieee80211_priv(dev);
-#endif
#define SCAN_RX_INITIAL_GAIN 0x17
#define POWER_DETECTION_TH 0x08
u32 BitMask;
//added by amy
extern void InitialGain819xUsb(struct net_device *dev, u8 Operation);
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
extern void InitialGainOperateWorkItemCallBack(struct work_struct *work);
-#else
-extern void InitialGainOperateWorkItemCallBack(struct net_device *dev);
-#endif
#endif