greybus: camera: Stream config change unipro speed

Unipro network speed was increased at camera initialization time and
never slowed down.
This unnecessary drains power during the entire time camera module is
plugged in.
Increasing/decreasing unipro link speed before issuing stream
configuration request to camera module prevents this from happening.

Signed-off-by: Jacopo Mondi <jacopo.mondi@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

diff --git a/drivers/staging/greybus/camera.c b/drivers/staging/greybus/camera.c
index bcef392..c735908 100644 (file)
--- a/drivers/staging/greybus/camera.c
+++ b/drivers/staging/greybus/camera.c
@@ -120,9 +120,12 @@ static int gb_camera_configure_streams(struct gb_camera *gcam,
                                       unsigned int *flags,
                                       struct gb_camera_stream_config *streams)
 {
+       struct gb_interface *intf = gcam->connection->intf;
+       struct gb_svc *svc = gcam->connection->hd->svc;
        struct gb_camera_configure_streams_request *req;
        struct gb_camera_configure_streams_response *resp;
        struct ap_csi_config_request csi_cfg;
+
        unsigned int nstreams = *num_streams;
        unsigned int i;
        size_t req_size;
@@ -142,6 +145,57 @@ static int gb_camera_configure_streams(struct gb_camera *gcam,
                goto done;
        }
 
+       /*
+        * Setup unipro link speed before actually issuing configuration
+        * to the camera module, to assure unipro network speed is set
+        * before CSI interfaces gets configured
+        */
+       if (nstreams) {
+               ret = gb_svc_intf_set_power_mode(svc, intf->interface_id,
+                                                GB_SVC_UNIPRO_HS_SERIES_A,
+                                                GB_SVC_UNIPRO_FAST_MODE, 2, 2,
+                                                GB_SVC_UNIPRO_FAST_MODE, 2, 2,
+                                                GB_SVC_PWRM_RXTERMINATION |
+                                                GB_SVC_PWRM_TXTERMINATION, 0);
+               if (ret < 0)
+                       goto done;
+
+               ret = gb_svc_intf_set_power_mode(svc, svc->ap_intf_id,
+                                                GB_SVC_UNIPRO_HS_SERIES_A,
+                                                GB_SVC_UNIPRO_FAST_MODE, 2, 2,
+                                                GB_SVC_UNIPRO_FAST_MODE, 2, 2,
+                                                GB_SVC_PWRM_RXTERMINATION |
+                                                GB_SVC_PWRM_TXTERMINATION, 0);
+               if (ret < 0)
+                       goto done;
+       } else {
+               ret = gb_svc_intf_set_power_mode(svc, intf->interface_id,
+                                                GB_SVC_UNIPRO_HS_SERIES_A,
+                                                GB_SVC_UNIPRO_SLOW_AUTO_MODE,
+                                                1, 2,
+                                                GB_SVC_UNIPRO_SLOW_AUTO_MODE,
+                                                1, 2,
+                                                0, 0);
+               if (ret < 0) {
+                       gcam_err(gcam, "can't take camera link to PWM-G1 auto: %d\n",
+                                ret);
+                       goto done;
+               }
+
+               ret = gb_svc_intf_set_power_mode(svc, svc->ap_intf_id,
+                                                GB_SVC_UNIPRO_HS_SERIES_A,
+                                                GB_SVC_UNIPRO_SLOW_AUTO_MODE,
+                                                1, 2,
+                                                GB_SVC_UNIPRO_SLOW_AUTO_MODE,
+                                                1, 2,
+                                                0, 0);
+               if (ret < 0) {
+                       gcam_err(gcam, "can't take AP link to PWM-G1 auto: %d\n",
+                                ret);
+                       goto done;
+               }
+       }
+
        req->num_streams = nstreams;
        req->flags = *flags;
        req->padding = 0;
@@ -159,19 +213,19 @@ static int gb_camera_configure_streams(struct gb_camera *gcam,
                                GB_CAMERA_TYPE_CONFIGURE_STREAMS,
                                req, req_size, resp, resp_size);
        if (ret < 0)
-               goto done;
+               goto set_unipro_slow_mode;
 
        if (resp->num_streams > nstreams) {
                gcam_dbg(gcam, "got #streams %u > request %u\n",
                         resp->num_streams, nstreams);
                ret = -EIO;
-               goto done;
+               goto set_unipro_slow_mode;
        }
 
        if (resp->padding != 0) {
                gcam_dbg(gcam, "response padding != 0");
                ret = -EIO;
-               goto done;
+               goto set_unipro_slow_mode;
        }
 
        *flags = resp->flags;
@@ -190,7 +244,7 @@ static int gb_camera_configure_streams(struct gb_camera *gcam,
                if (cfg->padding[0] || cfg->padding[1] || cfg->padding[2]) {
                        gcam_dbg(gcam, "stream #%u padding != 0", i);
                        ret = -EIO;
-                       goto done;
+                       goto set_unipro_slow_mode;
                }
        }
 
@@ -219,6 +273,36 @@ static int gb_camera_configure_streams(struct gb_camera *gcam,
        *num_streams = resp->num_streams;
        ret = 0;
 
+       kfree(req);
+       kfree(resp);
+       return ret;
+
+set_unipro_slow_mode:
+       ret = gb_svc_intf_set_power_mode(svc, intf->interface_id,
+                                        GB_SVC_UNIPRO_HS_SERIES_A,
+                                        GB_SVC_UNIPRO_SLOW_AUTO_MODE,
+                                        1, 2,
+                                        GB_SVC_UNIPRO_SLOW_AUTO_MODE,
+                                        1, 2,
+                                        0, 0);
+       if (ret < 0) {
+               gcam_err(gcam, "can't take camera link to PWM-G1 auto: %d\n",
+                        ret);
+               goto done;
+       }
+
+       gb_svc_intf_set_power_mode(svc, svc->ap_intf_id,
+                                  GB_SVC_UNIPRO_HS_SERIES_A,
+                                  GB_SVC_UNIPRO_SLOW_AUTO_MODE,
+                                  1, 2,
+                                  GB_SVC_UNIPRO_SLOW_AUTO_MODE,
+                                  1, 2,
+                                  0, 0);
+       if (ret < 0)
+               gcam_err(gcam, "can't take AP link to PWM-G1 auto: %d\n",
+                        ret);
+
+
 done:
        kfree(req);
        kfree(resp);
@@ -767,24 +851,6 @@ static int gb_camera_connection_init(struct gb_connection *connection)
 
        gcam->data_connected = true;
 
-       ret = gb_svc_intf_set_power_mode(svc, connection->intf->interface_id,
-                                        GB_SVC_UNIPRO_HS_SERIES_A,
-                                        GB_SVC_UNIPRO_FAST_MODE, 2, 2,
-                                        GB_SVC_UNIPRO_FAST_MODE, 2, 2,
-                                        GB_SVC_PWRM_RXTERMINATION |
-                                        GB_SVC_PWRM_TXTERMINATION, 0);
-       if (ret < 0)
-               goto error;
-
-       ret = gb_svc_intf_set_power_mode(svc, svc->ap_intf_id,
-                                        GB_SVC_UNIPRO_HS_SERIES_A,
-                                        GB_SVC_UNIPRO_FAST_MODE, 2, 2,
-                                        GB_SVC_UNIPRO_FAST_MODE, 2, 2,
-                                        GB_SVC_PWRM_RXTERMINATION |
-                                        GB_SVC_PWRM_TXTERMINATION, 0);
-       if (ret < 0)
-               goto error;
-
        ret = gb_camera_debugfs_init(gcam);
        if (ret < 0)
                goto error;