The actual device name of the SPI controller being registered on EP93xx is
"spi0" (as seen by gpiod_find_lookup_table()). This patch fixes all
relevant lookup tables and the following failure (seen on
EDB9302):
ep93xx-spi ep93xx-spi.0: failed to register SPI master
ep93xx-spi: probe of ep93xx-spi.0 failed with error -22
Fixes: 1dfbf334f1236 ("spi: ep93xx: Convert to use CS GPIO descriptors")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Link: https://lore.kernel.org/r/20190831180402.10008-1-alexander.sverdlin@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
};
static struct gpiod_lookup_table edb93xx_spi_cs_gpio_table = {
- .dev_id = "ep93xx-spi.0",
+ .dev_id = "spi0",
.table = {
GPIO_LOOKUP("A", 6, "cs", GPIO_ACTIVE_LOW),
{ },
* v1.3 parts will still work, since the signal on SFRMOUT is automatic.
*/
static struct gpiod_lookup_table simone_spi_cs_gpio_table = {
- .dev_id = "ep93xx-spi.0",
+ .dev_id = "spi0",
.table = {
GPIO_LOOKUP("A", 1, "cs", GPIO_ACTIVE_LOW),
{ },
* goes through CPLD
*/
static struct gpiod_lookup_table bk3_spi_cs_gpio_table = {
- .dev_id = "ep93xx-spi.0",
+ .dev_id = "spi0",
.table = {
GPIO_LOOKUP("F", 3, "cs", GPIO_ACTIVE_LOW),
{ },
};
static struct gpiod_lookup_table ts72xx_spi_cs_gpio_table = {
- .dev_id = "ep93xx-spi.0",
+ .dev_id = "spi0",
.table = {
/* DIO_17 */
GPIO_LOOKUP("F", 2, "cs", GPIO_ACTIVE_LOW),
};
static struct gpiod_lookup_table vision_spi_cs_gpio_table = {
- .dev_id = "ep93xx-spi.0",
+ .dev_id = "spi0",
.table = {
GPIO_LOOKUP_IDX("A", 6, "cs", 0, GPIO_ACTIVE_LOW),
GPIO_LOOKUP_IDX("A", 7, "cs", 1, GPIO_ACTIVE_LOW),