staging: comedi: dt3000: add some whitespace to the subdevice init

To improve the readability, add some whitespace to the subdevice
init.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/comedi/drivers/dt3000.c b/drivers/staging/comedi/drivers/dt3000.c
index e29049e..347527f 100644 (file)
--- a/drivers/staging/comedi/drivers/dt3000.c
+++ b/drivers/staging/comedi/drivers/dt3000.c
@@ -817,50 +817,49 @@ static int dt3000_attach_pci(struct comedi_device *dev,
 
        s = &dev->subdevices[0];
        dev->read_subdev = s;
-
        /* ai subdevice */
-       s->type = COMEDI_SUBD_AI;
-       s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_DIFF | SDF_CMD_READ;
-       s->n_chan = this_board->adchan;
-       s->insn_read = dt3k_ai_insn;
-       s->maxdata = (1 << this_board->adbits) - 1;
-       s->len_chanlist = 512;
-       s->range_table = &range_dt3000_ai;      /* XXX */
-       s->do_cmd = dt3k_ai_cmd;
-       s->do_cmdtest = dt3k_ai_cmdtest;
-       s->cancel = dt3k_ai_cancel;
+       s->type         = COMEDI_SUBD_AI;
+       s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_DIFF | SDF_CMD_READ;
+       s->n_chan       = this_board->adchan;
+       s->insn_read    = dt3k_ai_insn;
+       s->maxdata      = (1 << this_board->adbits) - 1;
+       s->len_chanlist = 512;
+       s->range_table  = &range_dt3000_ai;     /* XXX */
+       s->do_cmd       = dt3k_ai_cmd;
+       s->do_cmdtest   = dt3k_ai_cmdtest;
+       s->cancel       = dt3k_ai_cancel;
 
        s = &dev->subdevices[1];
        /* ao subsystem */
-       s->type = COMEDI_SUBD_AO;
-       s->subdev_flags = SDF_WRITABLE;
-       s->n_chan = 2;
-       s->insn_read = dt3k_ao_insn_read;
-       s->insn_write = dt3k_ao_insn;
-       s->maxdata = (1 << this_board->dabits) - 1;
-       s->len_chanlist = 1;
-       s->range_table = &range_bipolar10;
+       s->type         = COMEDI_SUBD_AO;
+       s->subdev_flags = SDF_WRITABLE;
+       s->n_chan       = 2;
+       s->insn_read    = dt3k_ao_insn_read;
+       s->insn_write   = dt3k_ao_insn;
+       s->maxdata      = (1 << this_board->dabits) - 1;
+       s->len_chanlist = 1;
+       s->range_table  = &range_bipolar10;
 
        s = &dev->subdevices[2];
        /* dio subsystem */
-       s->type = COMEDI_SUBD_DIO;
-       s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
-       s->n_chan = 8;
-       s->insn_config = dt3k_dio_insn_config;
-       s->insn_bits = dt3k_dio_insn_bits;
-       s->maxdata = 1;
-       s->len_chanlist = 8;
-       s->range_table = &range_digital;
+       s->type         = COMEDI_SUBD_DIO;
+       s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
+       s->n_chan       = 8;
+       s->insn_config  = dt3k_dio_insn_config;
+       s->insn_bits    = dt3k_dio_insn_bits;
+       s->maxdata      = 1;
+       s->len_chanlist = 8;
+       s->range_table  = &range_digital;
 
        s = &dev->subdevices[3];
        /* mem subsystem */
-       s->type = COMEDI_SUBD_MEMORY;
-       s->subdev_flags = SDF_READABLE;
-       s->n_chan = 0x1000;
-       s->insn_read = dt3k_mem_insn_read;
-       s->maxdata = 0xff;
-       s->len_chanlist = 1;
-       s->range_table = &range_unknown;
+       s->type         = COMEDI_SUBD_MEMORY;
+       s->subdev_flags = SDF_READABLE;
+       s->n_chan       = 0x1000;
+       s->insn_read    = dt3k_mem_insn_read;
+       s->maxdata      = 0xff;
+       s->len_chanlist = 1;
+       s->range_table  = &range_unknown;
 
 #if 0
        s = &dev->subdevices[4];