net: eepro100: Remove non-DM_ETH code

As DM_ETH is required for all network drivers, it's now safe to
remove the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>

diff --git a/drivers/net/eepro100.c b/drivers/net/eepro100.c
index 935cd9c..a042450 100644 (file)
--- a/drivers/net/eepro100.c
+++ b/drivers/net/eepro100.c
@@ -206,27 +206,14 @@ struct eepro100_priv {
        /* TX descriptor ring pointer */
        int                     tx_next;
        int                     tx_threshold;
-#ifdef CONFIG_DM_ETH
        struct udevice          *devno;
-#else
-       struct eth_device       dev;
-       pci_dev_t               devno;
-#endif
        char                    *name;
        void __iomem            *iobase;
        u8                      *enetaddr;
 };
 
-#if defined(CONFIG_DM_ETH)
 #define bus_to_phys(dev, a)    dm_pci_mem_to_phys((dev), (a))
 #define phys_to_bus(dev, a)    dm_pci_phys_to_mem((dev), (a))
-#elif defined(CONFIG_E500)
-#define bus_to_phys(dev, a)    (a)
-#define phys_to_bus(dev, a)    (a)
-#else
-#define bus_to_phys(dev, a)    pci_mem_to_phys((dev), (a))
-#define phys_to_bus(dev, a)    pci_phys_to_mem((dev), (a))
-#endif
 
 static int INW(struct eepro100_priv *priv, u_long addr)
 {
@@ -778,126 +765,6 @@ done:
        return;
 }
 
-#ifndef CONFIG_DM_ETH
-static int eepro100_init(struct eth_device *dev, struct bd_info *bis)
-{
-       struct eepro100_priv *priv =
-               container_of(dev, struct eepro100_priv, dev);
-
-       return eepro100_init_common(priv);
-}
-
-static void eepro100_halt(struct eth_device *dev)
-{
-       struct eepro100_priv *priv =
-               container_of(dev, struct eepro100_priv, dev);
-
-       eepro100_halt_common(priv);
-}
-
-static int eepro100_send(struct eth_device *dev, void *packet, int length)
-{
-       struct eepro100_priv *priv =
-               container_of(dev, struct eepro100_priv, dev);
-
-       return eepro100_send_common(priv, packet, length);
-}
-
-static int eepro100_recv(struct eth_device *dev)
-{
-       struct eepro100_priv *priv =
-               container_of(dev, struct eepro100_priv, dev);
-       uchar *packet;
-       int ret;
-
-       ret = eepro100_recv_common(priv, &packet);
-       if (ret > 0)
-               net_process_received_packet(packet, ret);
-       if (ret)
-               eepro100_free_pkt_common(priv);
-
-       return ret;
-}
-
-int eepro100_initialize(struct bd_info *bis)
-{
-       struct eepro100_priv *priv;
-       struct eth_device *dev;
-       int card_number = 0;
-       u32 iobase, status;
-       pci_dev_t devno;
-       int idx = 0;
-       int ret;
-
-       while (1) {
-               /* Find PCI device */
-               devno = pci_find_devices(supported, idx++);
-               if (devno < 0)
-                       break;
-
-               pci_read_config_dword(devno, PCI_BASE_ADDRESS_0, &iobase);
-               iobase &= ~0xf;
-
-               debug("eepro100: Intel i82559 PCI EtherExpressPro @0x%x\n",
-                     iobase);
-
-               pci_write_config_dword(devno, PCI_COMMAND,
-                                      PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
-
-               /* Check if I/O accesses and Bus Mastering are enabled. */
-               pci_read_config_dword(devno, PCI_COMMAND, &status);
-               if (!(status & PCI_COMMAND_MEMORY)) {
-                       printf("Error: Can not enable MEM access.\n");
-                       continue;
-               }
-
-               if (!(status & PCI_COMMAND_MASTER)) {
-                       printf("Error: Can not enable Bus Mastering.\n");
-                       continue;
-               }
-
-               priv = calloc(1, sizeof(*priv));
-               if (!priv) {
-                       printf("eepro100: Can not allocate memory\n");
-                       break;
-               }
-               dev = &priv->dev;
-
-               sprintf(dev->name, "i82559#%d", card_number);
-               priv->name = dev->name;
-               /* this have to come before bus_to_phys() */
-               priv->devno = devno;
-               priv->iobase = (void __iomem *)bus_to_phys(devno, iobase);
-               priv->enetaddr = dev->enetaddr;
-
-               dev->init = eepro100_init;
-               dev->halt = eepro100_halt;
-               dev->send = eepro100_send;
-               dev->recv = eepro100_recv;
-
-               eth_register(dev);
-
-               ret = eepro100_initialize_mii(priv);
-               if (ret) {
-                       eth_unregister(dev);
-                       free(priv);
-                       return ret;
-               }
-
-               card_number++;
-
-               /* Set the latency timer for value. */
-               pci_write_config_byte(devno, PCI_LATENCY_TIMER, 0x20);
-
-               udelay(10 * 1000);
-
-               eepro100_get_hwaddr(priv);
-       }
-
-       return card_number;
-}
-
-#else  /* DM_ETH */
 static int eepro100_start(struct udevice *dev)
 {
        struct eth_pdata *plat = dev_get_plat(dev);
@@ -1014,4 +881,3 @@ U_BOOT_DRIVER(eth_eepro100) = {
 };
 
 U_BOOT_PCI_DEVICE(eth_eepro100, supported);
-#endif