Moved all logic from dim.h and net_dim.h to dim.c and net_dim.c.
This is both more structurally appealing and would allow to only
expose externally used functions.
Signed-off-by: Tal Gilboa <talgi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
DYNAMIC INTERRUPT MODERATION
M: Tal Gilboa <talgi@mellanox.com>
S: Maintained
-F: include/linux/net_dim.h
F: include/linux/dim.h
+F: lib/dim/
DZ DECSTATION DZ11 SERIAL DRIVER
M: "Maciej W. Rozycki" <macro@linux-mips.org>
default y
depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \
SIBYTE_SB1xxx_SOC
+ select DIMLIB
---help---
If you have a network (Ethernet) chipset belonging to this class,
say Y.
#include <linux/bitmap.h>
#include <linux/ethtool.h>
#include <linux/if_vlan.h>
-#include <linux/net_dim.h>
+#include <linux/dim.h>
/* Receive/transmit descriptor format */
#define DESC_ADDR_HI_STATUS_LEN 0x00
#include <net/devlink.h>
#include <net/dst_metadata.h>
#include <net/xdp.h>
-#include <linux/net_dim.h>
+#include <linux/dim.h>
struct tx_bd {
__le32 tx_bd_len_flags_type;
#include <linux/module.h>
#include <linux/pci.h>
#include "bnxt_hsi.h"
-#include <linux/net_dim.h>
+#include <linux/dim.h>
#include "bnxt.h"
#include "bnxt_debugfs.h"
* the Free Software Foundation.
*/
-#include <linux/net_dim.h>
+#include <linux/dim.h>
#include "bnxt_hsi.h"
#include "bnxt.h"
#include <linux/mii.h>
#include <linux/if_vlan.h>
#include <linux/phy.h>
-#include <linux/net_dim.h>
+#include <linux/dim.h>
/* total number of Buffer Descriptors, same for Rx/Tx */
#define TOTAL_DESC 256
depends on NETDEVICES && ETHERNET && INET && PCI && MLX5_CORE
depends on IPV6=y || IPV6=n || MLX5_CORE=m
select PAGE_POOL
+ select DIMLIB
default n
---help---
Ethernet support in Mellanox Technologies ConnectX-4 NIC.
#include <linux/rhashtable.h>
#include <net/switchdev.h>
#include <net/xdp.h>
-#include <linux/net_dim.h>
+#include <linux/dim.h>
#include <linux/bits.h>
#include "wq.h"
#include "mlx5_core.h"
* SOFTWARE.
*/
-#include <linux/net_dim.h>
+#include <linux/dim.h>
#include "en.h"
static void
#include <linux/module.h>
+/**
+ * Number of events between DIM iterations.
+ * Causes a moderation of the algorithm run.
+ */
#define DIM_NEVENTS 64
-/* more than 10% difference */
+/**
+ * Is a difference between values justifies taking an action.
+ * We consider 10% difference as significant.
+ */
#define IS_SIGNIFICANT_DIFF(val, ref) \
(((100UL * abs((val) - (ref))) / (ref)) > 10)
+
+/**
+ * Calculate the gap between two values.
+ * Take wrap-around and variable size into consideration.
+ */
#define BIT_GAP(bits, end, start) ((((end) - (start)) + BIT_ULL(bits)) \
-& (BIT_ULL(bits) - 1))
+ & (BIT_ULL(bits) - 1))
+/**
+ * Structure for CQ moderation values.
+ * Used for communications between DIM and its consumer.
+ *
+ * @usec: CQ timer suggestion (by DIM)
+ * @pkts: CQ packet counter suggestion (by DIM)
+ * @cq_period_mode: CQ priod count mode (from CQE/EQE)
+ */
struct dim_cq_moder {
u16 usec;
u16 pkts;
u8 cq_period_mode;
};
+/**
+ * Structure for DIM sample data.
+ * Used for communications between DIM and its consumer.
+ *
+ * @time: Sample timestamp
+ * @pkt_ctr: Number of packets
+ * @byte_ctr: Number of bytes
+ * @event_ctr: Number of events
+ */
struct dim_sample {
ktime_t time;
u32 pkt_ctr;
u16 event_ctr;
};
+/**
+ * Structure for DIM stats.
+ * Used for holding current measured rates.
+ *
+ * @ppms: Packets per msec
+ * @bpms: Bytes per msec
+ * @epms: Events per msec
+ */
struct dim_stats {
- int ppms; /* packets per msec */
- int bpms; /* bytes per msec */
- int epms; /* events per msec */
+ int ppms;
+ int bpms;
+ int epms;
};
-struct dim { /* Dynamic Interrupt Moderation */
+/**
+ * Main structure for dynamic interrupt moderation (DIM).
+ * Used for holding all information about a specific DIM instance.
+ *
+ * @state: Algorithm state (see below)
+ * @prev_stats: Measured rates from previous iteration (for comparison)
+ * @start_sample: Sampled data at start of current iteration
+ * @work: Work to perform on action required
+ * @profile_ix: Current moderation profile
+ * @mode: CQ period count mode
+ * @tune_state: Algorithm tuning state (see below)
+ * @steps_right: Number of steps taken towards higher moderation
+ * @steps_left: Number of steps taken towards lower moderation
+ * @tired: Parking depth counter
+ */
+struct dim {
u8 state;
struct dim_stats prev_stats;
struct dim_sample start_sample;
u8 tired;
};
+/**
+ * enum dim_cq_period_mode
+ *
+ * These are the modes for CQ period count.
+ *
+ * @DIM_CQ_PERIOD_MODE_START_FROM_EQE: Start counting from EQE
+ * @DIM_CQ_PERIOD_MODE_START_FROM_CQE: Start counting from CQE (implies timer reset)
+ * @DIM_CQ_PERIOD_NUM_MODES: Number of modes
+ */
enum {
DIM_CQ_PERIOD_MODE_START_FROM_EQE = 0x0,
DIM_CQ_PERIOD_MODE_START_FROM_CQE = 0x1,
DIM_CQ_PERIOD_NUM_MODES
};
+/**
+ * enum dim_state
+ *
+ * These are the DIM algorithm states.
+ * These will determine if the algorithm is in a valid state to start an iteration.
+ *
+ * @DIM_START_MEASURE: This is the first iteration (also after applying a new profile)
+ * @DIM_MEASURE_IN_PROGRESS: Algorithm is already in progress - check if
+ * need to perform an action
+ * @DIM_APPLY_NEW_PROFILE: DIM consumer is currently applying a profile - no need to measure
+ */
enum {
DIM_START_MEASURE,
DIM_MEASURE_IN_PROGRESS,
DIM_APPLY_NEW_PROFILE,
};
+/**
+ * enum dim_tune_state
+ *
+ * These are the DIM algorithm tune states.
+ * These will determine which action the algorithm should perform.
+ *
+ * @DIM_PARKING_ON_TOP: Algorithm found a local top point - exit on significant difference
+ * @DIM_PARKING_TIRED: Algorithm found a deep top point - don't exit if tired > 0
+ * @DIM_GOING_RIGHT: Algorithm is currently trying higher moderation levels
+ * @DIM_GOING_LEFT: Algorithm is currently trying lower moderation levels
+ */
enum {
DIM_PARKING_ON_TOP,
DIM_PARKING_TIRED,
DIM_GOING_LEFT,
};
+/**
+ * enum dim_stats_state
+ *
+ * These are the DIM algorithm statistics states.
+ * These will determine the verdict of current iteration.
+ *
+ * @DIM_STATS_WORSE: Current iteration shows worse performance than before
+ * @DIM_STATS_WORSE: Current iteration shows same performance than before
+ * @DIM_STATS_WORSE: Current iteration shows better performance than before
+ */
enum {
DIM_STATS_WORSE,
DIM_STATS_SAME,
DIM_STATS_BETTER,
};
+/**
+ * enum dim_step_result
+ *
+ * These are the DIM algorithm step results.
+ * These describe the result of a step.
+ *
+ * @DIM_STEPPED: Performed a regular step
+ * @DIM_TOO_TIRED: Same kind of step was done multiple times - should go to
+ * tired parking
+ * @DIM_ON_EDGE: Stepped to the most left/right profile
+ */
enum {
DIM_STEPPED,
DIM_TOO_TIRED,
DIM_ON_EDGE,
};
-static inline bool dim_on_top(struct dim *dim)
-{
- switch (dim->tune_state) {
- case DIM_PARKING_ON_TOP:
- case DIM_PARKING_TIRED:
- return true;
- case DIM_GOING_RIGHT:
- return (dim->steps_left > 1) && (dim->steps_right == 1);
- default: /* DIM_GOING_LEFT */
- return (dim->steps_right > 1) && (dim->steps_left == 1);
- }
-}
+/**
+ * dim_on_top - check if current state is a good place to stop (top location)
+ * @dim: DIM context
+ *
+ * Check if current profile is a good place to park at.
+ * This will result in reducing the DIM checks frequency as we assume we
+ * shouldn't probably change profiles, unless traffic pattern wasn't changed.
+ */
+bool dim_on_top(struct dim *dim);
-static inline void dim_turn(struct dim *dim)
-{
- switch (dim->tune_state) {
- case DIM_PARKING_ON_TOP:
- case DIM_PARKING_TIRED:
- break;
- case DIM_GOING_RIGHT:
- dim->tune_state = DIM_GOING_LEFT;
- dim->steps_left = 0;
- break;
- case DIM_GOING_LEFT:
- dim->tune_state = DIM_GOING_RIGHT;
- dim->steps_right = 0;
- break;
- }
-}
+/**
+ * dim_turn - change profile alterning direction
+ * @dim: DIM context
+ *
+ * Go left if we were going right and vice-versa.
+ * Do nothing if currently parking.
+ */
+void dim_turn(struct dim *dim);
-static inline void dim_park_on_top(struct dim *dim)
-{
- dim->steps_right = 0;
- dim->steps_left = 0;
- dim->tired = 0;
- dim->tune_state = DIM_PARKING_ON_TOP;
-}
+/**
+ * dim_park_on_top - enter a parking state on a top location
+ * @dim: DIM context
+ *
+ * Enter parking state.
+ * Clear all movement history.
+ */
+void dim_park_on_top(struct dim *dim);
-static inline void dim_park_tired(struct dim *dim)
-{
- dim->steps_right = 0;
- dim->steps_left = 0;
- dim->tune_state = DIM_PARKING_TIRED;
-}
+/**
+ * dim_park_tired - enter a tired parking state
+ * @dim: DIM context
+ *
+ * Enter parking state.
+ * Clear all movement history and cause DIM checks frequency to reduce.
+ */
+void dim_park_tired(struct dim *dim);
+
+/**
+ * dim_calc_stats - calculate the difference between two samples
+ * @start: start sample
+ * @end: end sample
+ * @curr_stats: delta between samples
+ *
+ * Calculate the delta between two samples (in data rates).
+ * Takes into consideration counter wrap-around.
+ */
+void dim_calc_stats(struct dim_sample *start, struct dim_sample *end,
+ struct dim_stats *curr_stats);
+/**
+ * dim_update_sample - set a sample's fields with give values
+ * @event_ctr: number of events to set
+ * @packets: number of packets to set
+ * @bytes: number of bytes to set
+ * @s: DIM sample
+ */
static inline void
dim_update_sample(u16 event_ctr, u64 packets, u64 bytes, struct dim_sample *s)
{
s->event_ctr = event_ctr;
}
-static inline void
-dim_calc_stats(struct dim_sample *start, struct dim_sample *end,
- struct dim_stats *curr_stats)
-{
- /* u32 holds up to 71 minutes, should be enough */
- u32 delta_us = ktime_us_delta(end->time, start->time);
- u32 npkts = BIT_GAP(BITS_PER_TYPE(u32), end->pkt_ctr, start->pkt_ctr);
- u32 nbytes = BIT_GAP(BITS_PER_TYPE(u32), end->byte_ctr,
- start->byte_ctr);
-
- if (!delta_us)
- return;
-
- curr_stats->ppms = DIV_ROUND_UP(npkts * USEC_PER_MSEC, delta_us);
- curr_stats->bpms = DIV_ROUND_UP(nbytes * USEC_PER_MSEC, delta_us);
- curr_stats->epms = DIV_ROUND_UP(DIM_NEVENTS * USEC_PER_MSEC,
- delta_us);
+/* Net DIM */
+
+/*
+ * Net DIM profiles:
+ * There are different set of profiles for each CQ period mode.
+ * There are different set of profiles for RX/TX CQs.
+ * Each profile size must be of NET_DIM_PARAMS_NUM_PROFILES
+ */
+#define NET_DIM_PARAMS_NUM_PROFILES 5
+#define NET_DIM_DEFAULT_RX_CQ_MODERATION_PKTS_FROM_EQE 256
+#define NET_DIM_DEFAULT_TX_CQ_MODERATION_PKTS_FROM_EQE 128
+#define NET_DIM_DEF_PROFILE_CQE 1
+#define NET_DIM_DEF_PROFILE_EQE 1
+
+#define NET_DIM_RX_EQE_PROFILES { \
+ {1, NET_DIM_DEFAULT_RX_CQ_MODERATION_PKTS_FROM_EQE}, \
+ {8, NET_DIM_DEFAULT_RX_CQ_MODERATION_PKTS_FROM_EQE}, \
+ {64, NET_DIM_DEFAULT_RX_CQ_MODERATION_PKTS_FROM_EQE}, \
+ {128, NET_DIM_DEFAULT_RX_CQ_MODERATION_PKTS_FROM_EQE}, \
+ {256, NET_DIM_DEFAULT_RX_CQ_MODERATION_PKTS_FROM_EQE}, \
}
+#define NET_DIM_RX_CQE_PROFILES { \
+ {2, 256}, \
+ {8, 128}, \
+ {16, 64}, \
+ {32, 64}, \
+ {64, 64} \
+}
+
+#define NET_DIM_TX_EQE_PROFILES { \
+ {1, NET_DIM_DEFAULT_TX_CQ_MODERATION_PKTS_FROM_EQE}, \
+ {8, NET_DIM_DEFAULT_TX_CQ_MODERATION_PKTS_FROM_EQE}, \
+ {32, NET_DIM_DEFAULT_TX_CQ_MODERATION_PKTS_FROM_EQE}, \
+ {64, NET_DIM_DEFAULT_TX_CQ_MODERATION_PKTS_FROM_EQE}, \
+ {128, NET_DIM_DEFAULT_TX_CQ_MODERATION_PKTS_FROM_EQE} \
+}
+
+#define NET_DIM_TX_CQE_PROFILES { \
+ {5, 128}, \
+ {8, 64}, \
+ {16, 32}, \
+ {32, 32}, \
+ {64, 32} \
+}
+
+static const struct dim_cq_moder
+rx_profile[DIM_CQ_PERIOD_NUM_MODES][NET_DIM_PARAMS_NUM_PROFILES] = {
+ NET_DIM_RX_EQE_PROFILES,
+ NET_DIM_RX_CQE_PROFILES,
+};
+
+static const struct dim_cq_moder
+tx_profile[DIM_CQ_PERIOD_NUM_MODES][NET_DIM_PARAMS_NUM_PROFILES] = {
+ NET_DIM_TX_EQE_PROFILES,
+ NET_DIM_TX_CQE_PROFILES,
+};
+
+/**
+ * net_dim_get_rx_moderation - provide a CQ moderation object for the given RX profile
+ * @cq_period_mode: CQ period mode
+ * @ix: Profile index
+ */
+struct dim_cq_moder net_dim_get_rx_moderation(u8 cq_period_mode, int ix);
+
+/**
+ * net_dim_get_def_rx_moderation - provide the default RX moderation
+ * @cq_period_mode: CQ period mode
+ */
+struct dim_cq_moder net_dim_get_def_rx_moderation(u8 cq_period_mode);
+
+/**
+ * net_dim_get_tx_moderation - provide a CQ moderation object for the given TX profile
+ * @cq_period_mode: CQ period mode
+ * @ix: Profile index
+ */
+struct dim_cq_moder net_dim_get_tx_moderation(u8 cq_period_mode, int ix);
+
+/**
+ * net_dim_get_def_tx_moderation - provide the default TX moderation
+ * @cq_period_mode: CQ period mode
+ */
+struct dim_cq_moder net_dim_get_def_tx_moderation(u8 cq_period_mode);
+
+/**
+ * net_dim - main DIM algorithm entry point
+ * @dim: DIM instance information
+ * @end_sample: Current data measurement
+ *
+ * Called by the consumer.
+ * This is the main logic of the algorithm, where data is processed in order to decide on next
+ * required action.
+ */
+void net_dim(struct dim *dim, struct dim_sample end_sample);
+
#endif /* DIM_H */
+++ /dev/null
-/*
- * Copyright (c) 2016, Mellanox Technologies. All rights reserved.
- * Copyright (c) 2017-2018, Broadcom Limited. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#ifndef NET_DIM_H
-#define NET_DIM_H
-
-#include <linux/module.h>
-#include <linux/dim.h>
-
-#define NET_DIM_PARAMS_NUM_PROFILES 5
-/* Netdev dynamic interrupt moderation profiles */
-#define NET_DIM_DEFAULT_RX_CQ_MODERATION_PKTS_FROM_EQE 256
-#define NET_DIM_DEFAULT_TX_CQ_MODERATION_PKTS_FROM_EQE 128
-#define NET_DIM_DEF_PROFILE_CQE 1
-#define NET_DIM_DEF_PROFILE_EQE 1
-
-/* All profiles sizes must be NET_PARAMS_DIM_NUM_PROFILES */
-#define NET_DIM_RX_EQE_PROFILES { \
- {1, NET_DIM_DEFAULT_RX_CQ_MODERATION_PKTS_FROM_EQE}, \
- {8, NET_DIM_DEFAULT_RX_CQ_MODERATION_PKTS_FROM_EQE}, \
- {64, NET_DIM_DEFAULT_RX_CQ_MODERATION_PKTS_FROM_EQE}, \
- {128, NET_DIM_DEFAULT_RX_CQ_MODERATION_PKTS_FROM_EQE}, \
- {256, NET_DIM_DEFAULT_RX_CQ_MODERATION_PKTS_FROM_EQE}, \
-}
-
-#define NET_DIM_RX_CQE_PROFILES { \
- {2, 256}, \
- {8, 128}, \
- {16, 64}, \
- {32, 64}, \
- {64, 64} \
-}
-
-#define NET_DIM_TX_EQE_PROFILES { \
- {1, NET_DIM_DEFAULT_TX_CQ_MODERATION_PKTS_FROM_EQE}, \
- {8, NET_DIM_DEFAULT_TX_CQ_MODERATION_PKTS_FROM_EQE}, \
- {32, NET_DIM_DEFAULT_TX_CQ_MODERATION_PKTS_FROM_EQE}, \
- {64, NET_DIM_DEFAULT_TX_CQ_MODERATION_PKTS_FROM_EQE}, \
- {128, NET_DIM_DEFAULT_TX_CQ_MODERATION_PKTS_FROM_EQE} \
-}
-
-#define NET_DIM_TX_CQE_PROFILES { \
- {5, 128}, \
- {8, 64}, \
- {16, 32}, \
- {32, 32}, \
- {64, 32} \
-}
-
-static const struct dim_cq_moder
-rx_profile[DIM_CQ_PERIOD_NUM_MODES][NET_DIM_PARAMS_NUM_PROFILES] = {
- NET_DIM_RX_EQE_PROFILES,
- NET_DIM_RX_CQE_PROFILES,
-};
-
-static const struct dim_cq_moder
-tx_profile[DIM_CQ_PERIOD_NUM_MODES][NET_DIM_PARAMS_NUM_PROFILES] = {
- NET_DIM_TX_EQE_PROFILES,
- NET_DIM_TX_CQE_PROFILES,
-};
-
-static inline struct dim_cq_moder
-net_dim_get_rx_moderation(u8 cq_period_mode, int ix)
-{
- struct dim_cq_moder cq_moder = rx_profile[cq_period_mode][ix];
-
- cq_moder.cq_period_mode = cq_period_mode;
- return cq_moder;
-}
-
-static inline struct dim_cq_moder
-net_dim_get_def_rx_moderation(u8 cq_period_mode)
-{
- u8 profile_ix = cq_period_mode == DIM_CQ_PERIOD_MODE_START_FROM_CQE ?
- NET_DIM_DEF_PROFILE_CQE : NET_DIM_DEF_PROFILE_EQE;
-
- return net_dim_get_rx_moderation(cq_period_mode, profile_ix);
-}
-
-static inline struct dim_cq_moder
-net_dim_get_tx_moderation(u8 cq_period_mode, int ix)
-{
- struct dim_cq_moder cq_moder = tx_profile[cq_period_mode][ix];
-
- cq_moder.cq_period_mode = cq_period_mode;
- return cq_moder;
-}
-
-static inline struct dim_cq_moder
-net_dim_get_def_tx_moderation(u8 cq_period_mode)
-{
- u8 profile_ix = cq_period_mode == DIM_CQ_PERIOD_MODE_START_FROM_CQE ?
- NET_DIM_DEF_PROFILE_CQE : NET_DIM_DEF_PROFILE_EQE;
-
- return net_dim_get_tx_moderation(cq_period_mode, profile_ix);
-}
-
-static inline int net_dim_step(struct dim *dim)
-{
- if (dim->tired == (NET_DIM_PARAMS_NUM_PROFILES * 2))
- return DIM_TOO_TIRED;
-
- switch (dim->tune_state) {
- case DIM_PARKING_ON_TOP:
- case DIM_PARKING_TIRED:
- break;
- case DIM_GOING_RIGHT:
- if (dim->profile_ix == (NET_DIM_PARAMS_NUM_PROFILES - 1))
- return DIM_ON_EDGE;
- dim->profile_ix++;
- dim->steps_right++;
- break;
- case DIM_GOING_LEFT:
- if (dim->profile_ix == 0)
- return DIM_ON_EDGE;
- dim->profile_ix--;
- dim->steps_left++;
- break;
- }
-
- dim->tired++;
- return DIM_STEPPED;
-}
-
-static inline void net_dim_exit_parking(struct dim *dim)
-{
- dim->tune_state = dim->profile_ix ? DIM_GOING_LEFT :
- DIM_GOING_RIGHT;
- net_dim_step(dim);
-}
-
-static inline int net_dim_stats_compare(struct dim_stats *curr,
- struct dim_stats *prev)
-{
- if (!prev->bpms)
- return curr->bpms ? DIM_STATS_BETTER :
- DIM_STATS_SAME;
-
- if (IS_SIGNIFICANT_DIFF(curr->bpms, prev->bpms))
- return (curr->bpms > prev->bpms) ? DIM_STATS_BETTER :
- DIM_STATS_WORSE;
-
- if (!prev->ppms)
- return curr->ppms ? DIM_STATS_BETTER :
- DIM_STATS_SAME;
-
- if (IS_SIGNIFICANT_DIFF(curr->ppms, prev->ppms))
- return (curr->ppms > prev->ppms) ? DIM_STATS_BETTER :
- DIM_STATS_WORSE;
-
- if (!prev->epms)
- return DIM_STATS_SAME;
-
- if (IS_SIGNIFICANT_DIFF(curr->epms, prev->epms))
- return (curr->epms < prev->epms) ? DIM_STATS_BETTER :
- DIM_STATS_WORSE;
-
- return DIM_STATS_SAME;
-}
-
-static inline bool net_dim_decision(struct dim_stats *curr_stats,
- struct dim *dim)
-{
- int prev_state = dim->tune_state;
- int prev_ix = dim->profile_ix;
- int stats_res;
- int step_res;
-
- switch (dim->tune_state) {
- case DIM_PARKING_ON_TOP:
- stats_res = net_dim_stats_compare(curr_stats, &dim->prev_stats);
- if (stats_res != DIM_STATS_SAME)
- net_dim_exit_parking(dim);
- break;
-
- case DIM_PARKING_TIRED:
- dim->tired--;
- if (!dim->tired)
- net_dim_exit_parking(dim);
- break;
-
- case DIM_GOING_RIGHT:
- case DIM_GOING_LEFT:
- stats_res = net_dim_stats_compare(curr_stats, &dim->prev_stats);
- if (stats_res != DIM_STATS_BETTER)
- dim_turn(dim);
-
- if (dim_on_top(dim)) {
- dim_park_on_top(dim);
- break;
- }
-
- step_res = net_dim_step(dim);
- switch (step_res) {
- case DIM_ON_EDGE:
- dim_park_on_top(dim);
- break;
- case DIM_TOO_TIRED:
- dim_park_tired(dim);
- break;
- }
-
- break;
- }
-
- if (prev_state != DIM_PARKING_ON_TOP ||
- dim->tune_state != DIM_PARKING_ON_TOP)
- dim->prev_stats = *curr_stats;
-
- return dim->profile_ix != prev_ix;
-}
-
-static inline void net_dim(struct dim *dim,
- struct dim_sample end_sample)
-{
- struct dim_stats curr_stats;
- u16 nevents;
-
- switch (dim->state) {
- case DIM_MEASURE_IN_PROGRESS:
- nevents = BIT_GAP(BITS_PER_TYPE(u16),
- end_sample.event_ctr,
- dim->start_sample.event_ctr);
- if (nevents < DIM_NEVENTS)
- break;
- dim_calc_stats(&dim->start_sample, &end_sample, &curr_stats);
- if (net_dim_decision(&curr_stats, dim)) {
- dim->state = DIM_APPLY_NEW_PROFILE;
- schedule_work(&dim->work);
- break;
- }
- /* fall through */
- case DIM_START_MEASURE:
- dim_update_sample(end_sample.event_ctr, end_sample.pkt_ctr,
- end_sample.byte_ctr, &dim->start_sample);
- dim->state = DIM_MEASURE_IN_PROGRESS;
- break;
- case DIM_APPLY_NEW_PROFILE:
- break;
- }
-}
-
-#endif /* NET_DIM_H */
Digital signature verification. Currently only RSA is supported.
Implementation is done using GnuPG MPI library
+config DIMLIB
+ bool "DIM library"
+ default y
+ help
+ Dynamic Interrupt Moderation library.
+ Implements an algorithm for dynamically change CQ modertion values
+ according to run time performance.
+
#
# libfdt files, only selected if needed.
#
obj-$(CONFIG_GLOB_SELFTEST) += globtest.o
obj-$(CONFIG_MPILIB) += mpi/
+obj-$(CONFIG_DIMLIB) += dim/
obj-$(CONFIG_SIGNATURE) += digsig.o
lib-$(CONFIG_CLZ_TAB) += clz_tab.o
--- /dev/null
+#
+# DIM Dynamic Interrupt Moderation library
+#
+
+obj-$(CONFIG_DIMLIB) = net_dim.o
+
+net_dim-y = \
+ dim.o \
+ net_dim.o
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB
+/*
+ * Copyright (c) 2019, Mellanox Technologies inc. All rights reserved.
+ */
+
+#include <linux/dim.h>
+
+bool dim_on_top(struct dim *dim)
+{
+ switch (dim->tune_state) {
+ case DIM_PARKING_ON_TOP:
+ case DIM_PARKING_TIRED:
+ return true;
+ case DIM_GOING_RIGHT:
+ return (dim->steps_left > 1) && (dim->steps_right == 1);
+ default: /* DIM_GOING_LEFT */
+ return (dim->steps_right > 1) && (dim->steps_left == 1);
+ }
+}
+EXPORT_SYMBOL(dim_on_top);
+
+void dim_turn(struct dim *dim)
+{
+ switch (dim->tune_state) {
+ case DIM_PARKING_ON_TOP:
+ case DIM_PARKING_TIRED:
+ break;
+ case DIM_GOING_RIGHT:
+ dim->tune_state = DIM_GOING_LEFT;
+ dim->steps_left = 0;
+ break;
+ case DIM_GOING_LEFT:
+ dim->tune_state = DIM_GOING_RIGHT;
+ dim->steps_right = 0;
+ break;
+ }
+}
+EXPORT_SYMBOL(dim_turn);
+
+void dim_park_on_top(struct dim *dim)
+{
+ dim->steps_right = 0;
+ dim->steps_left = 0;
+ dim->tired = 0;
+ dim->tune_state = DIM_PARKING_ON_TOP;
+}
+EXPORT_SYMBOL(dim_park_on_top);
+
+void dim_park_tired(struct dim *dim)
+{
+ dim->steps_right = 0;
+ dim->steps_left = 0;
+ dim->tune_state = DIM_PARKING_TIRED;
+}
+EXPORT_SYMBOL(dim_park_tired);
+
+void dim_calc_stats(struct dim_sample *start, struct dim_sample *end,
+ struct dim_stats *curr_stats)
+{
+ /* u32 holds up to 71 minutes, should be enough */
+ u32 delta_us = ktime_us_delta(end->time, start->time);
+ u32 npkts = BIT_GAP(BITS_PER_TYPE(u32), end->pkt_ctr, start->pkt_ctr);
+ u32 nbytes = BIT_GAP(BITS_PER_TYPE(u32), end->byte_ctr,
+ start->byte_ctr);
+
+ if (!delta_us)
+ return;
+
+ curr_stats->ppms = DIV_ROUND_UP(npkts * USEC_PER_MSEC, delta_us);
+ curr_stats->bpms = DIV_ROUND_UP(nbytes * USEC_PER_MSEC, delta_us);
+ curr_stats->epms = DIV_ROUND_UP(DIM_NEVENTS * USEC_PER_MSEC,
+ delta_us);
+}
+EXPORT_SYMBOL(dim_calc_stats);
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB
+/*
+ * Copyright (c) 2018, Mellanox Technologies inc. All rights reserved.
+ */
+
+#include <linux/dim.h>
+
+struct dim_cq_moder
+net_dim_get_rx_moderation(u8 cq_period_mode, int ix)
+{
+ struct dim_cq_moder cq_moder = rx_profile[cq_period_mode][ix];
+
+ cq_moder.cq_period_mode = cq_period_mode;
+ return cq_moder;
+}
+EXPORT_SYMBOL(net_dim_get_rx_moderation);
+
+struct dim_cq_moder
+net_dim_get_def_rx_moderation(u8 cq_period_mode)
+{
+ u8 profile_ix = cq_period_mode == DIM_CQ_PERIOD_MODE_START_FROM_CQE ?
+ NET_DIM_DEF_PROFILE_CQE : NET_DIM_DEF_PROFILE_EQE;
+
+ return net_dim_get_rx_moderation(cq_period_mode, profile_ix);
+}
+EXPORT_SYMBOL(net_dim_get_def_rx_moderation);
+
+struct dim_cq_moder
+net_dim_get_tx_moderation(u8 cq_period_mode, int ix)
+{
+ struct dim_cq_moder cq_moder = tx_profile[cq_period_mode][ix];
+
+ cq_moder.cq_period_mode = cq_period_mode;
+ return cq_moder;
+}
+EXPORT_SYMBOL(net_dim_get_tx_moderation);
+
+struct dim_cq_moder
+net_dim_get_def_tx_moderation(u8 cq_period_mode)
+{
+ u8 profile_ix = cq_period_mode == DIM_CQ_PERIOD_MODE_START_FROM_CQE ?
+ NET_DIM_DEF_PROFILE_CQE : NET_DIM_DEF_PROFILE_EQE;
+
+ return net_dim_get_tx_moderation(cq_period_mode, profile_ix);
+}
+EXPORT_SYMBOL(net_dim_get_def_tx_moderation);
+
+static int net_dim_step(struct dim *dim)
+{
+ if (dim->tired == (NET_DIM_PARAMS_NUM_PROFILES * 2))
+ return DIM_TOO_TIRED;
+
+ switch (dim->tune_state) {
+ case DIM_PARKING_ON_TOP:
+ case DIM_PARKING_TIRED:
+ break;
+ case DIM_GOING_RIGHT:
+ if (dim->profile_ix == (NET_DIM_PARAMS_NUM_PROFILES - 1))
+ return DIM_ON_EDGE;
+ dim->profile_ix++;
+ dim->steps_right++;
+ break;
+ case DIM_GOING_LEFT:
+ if (dim->profile_ix == 0)
+ return DIM_ON_EDGE;
+ dim->profile_ix--;
+ dim->steps_left++;
+ break;
+ }
+
+ dim->tired++;
+ return DIM_STEPPED;
+}
+
+static void net_dim_exit_parking(struct dim *dim)
+{
+ dim->tune_state = dim->profile_ix ? DIM_GOING_LEFT : DIM_GOING_RIGHT;
+ net_dim_step(dim);
+}
+
+static int net_dim_stats_compare(struct dim_stats *curr,
+ struct dim_stats *prev)
+{
+ if (!prev->bpms)
+ return curr->bpms ? DIM_STATS_BETTER : DIM_STATS_SAME;
+
+ if (IS_SIGNIFICANT_DIFF(curr->bpms, prev->bpms))
+ return (curr->bpms > prev->bpms) ? DIM_STATS_BETTER :
+ DIM_STATS_WORSE;
+
+ if (!prev->ppms)
+ return curr->ppms ? DIM_STATS_BETTER :
+ DIM_STATS_SAME;
+
+ if (IS_SIGNIFICANT_DIFF(curr->ppms, prev->ppms))
+ return (curr->ppms > prev->ppms) ? DIM_STATS_BETTER :
+ DIM_STATS_WORSE;
+
+ if (!prev->epms)
+ return DIM_STATS_SAME;
+
+ if (IS_SIGNIFICANT_DIFF(curr->epms, prev->epms))
+ return (curr->epms < prev->epms) ? DIM_STATS_BETTER :
+ DIM_STATS_WORSE;
+
+ return DIM_STATS_SAME;
+}
+
+static bool net_dim_decision(struct dim_stats *curr_stats, struct dim *dim)
+{
+ int prev_state = dim->tune_state;
+ int prev_ix = dim->profile_ix;
+ int stats_res;
+ int step_res;
+
+ switch (dim->tune_state) {
+ case DIM_PARKING_ON_TOP:
+ stats_res = net_dim_stats_compare(curr_stats,
+ &dim->prev_stats);
+ if (stats_res != DIM_STATS_SAME)
+ net_dim_exit_parking(dim);
+ break;
+
+ case DIM_PARKING_TIRED:
+ dim->tired--;
+ if (!dim->tired)
+ net_dim_exit_parking(dim);
+ break;
+
+ case DIM_GOING_RIGHT:
+ case DIM_GOING_LEFT:
+ stats_res = net_dim_stats_compare(curr_stats,
+ &dim->prev_stats);
+ if (stats_res != DIM_STATS_BETTER)
+ dim_turn(dim);
+
+ if (dim_on_top(dim)) {
+ dim_park_on_top(dim);
+ break;
+ }
+
+ step_res = net_dim_step(dim);
+ switch (step_res) {
+ case DIM_ON_EDGE:
+ dim_park_on_top(dim);
+ break;
+ case DIM_TOO_TIRED:
+ dim_park_tired(dim);
+ break;
+ }
+
+ break;
+ }
+
+ if (prev_state != DIM_PARKING_ON_TOP ||
+ dim->tune_state != DIM_PARKING_ON_TOP)
+ dim->prev_stats = *curr_stats;
+
+ return dim->profile_ix != prev_ix;
+}
+
+void net_dim(struct dim *dim, struct dim_sample end_sample)
+{
+ struct dim_stats curr_stats;
+ u16 nevents;
+
+ switch (dim->state) {
+ case DIM_MEASURE_IN_PROGRESS:
+ nevents = BIT_GAP(BITS_PER_TYPE(u16),
+ end_sample.event_ctr,
+ dim->start_sample.event_ctr);
+ if (nevents < DIM_NEVENTS)
+ break;
+ dim_calc_stats(&dim->start_sample, &end_sample, &curr_stats);
+ if (net_dim_decision(&curr_stats, dim)) {
+ dim->state = DIM_APPLY_NEW_PROFILE;
+ schedule_work(&dim->work);
+ break;
+ }
+ /* fall through */
+ case DIM_START_MEASURE:
+ dim_update_sample(end_sample.event_ctr, end_sample.pkt_ctr,
+ end_sample.byte_ctr, &dim->start_sample);
+ dim->state = DIM_MEASURE_IN_PROGRESS;
+ break;
+ case DIM_APPLY_NEW_PROFILE:
+ break;
+ }
+}
+EXPORT_SYMBOL(net_dim);
projects / platform / kernel / linux-rpi.git / commitdiff