*/
#define UART_NR CONFIG_SERIAL_TXX9_NR_UARTS
-struct uart_txx9_port {
- struct uart_port port;
- /* No additional info for now */
-};
-
#define TXX9_REGION_SIZE 0x24
/* TXX9 Serial Registers */
#define TXX9_SIBGR_BCLK_T6 0x00000300
#define TXX9_SIBGR_BRD_MASK 0x000000ff
-static inline unsigned int sio_in(struct uart_txx9_port *up, int offset)
+static inline unsigned int sio_in(struct uart_port *up, int offset)
{
- switch (up->port.iotype) {
+ switch (up->iotype) {
default:
- return __raw_readl(up->port.membase + offset);
+ return __raw_readl(up->membase + offset);
case UPIO_PORT:
- return inl(up->port.iobase + offset);
+ return inl(up->iobase + offset);
}
}
static inline void
-sio_out(struct uart_txx9_port *up, int offset, int value)
+sio_out(struct uart_port *up, int offset, int value)
{
- switch (up->port.iotype) {
+ switch (up->iotype) {
default:
- __raw_writel(value, up->port.membase + offset);
+ __raw_writel(value, up->membase + offset);
break;
case UPIO_PORT:
- outl(value, up->port.iobase + offset);
+ outl(value, up->iobase + offset);
break;
}
}
static inline void
-sio_mask(struct uart_txx9_port *up, int offset, unsigned int value)
+sio_mask(struct uart_port *up, int offset, unsigned int value)
{
sio_out(up, offset, sio_in(up, offset) & ~value);
}
static inline void
-sio_set(struct uart_txx9_port *up, int offset, unsigned int value)
+sio_set(struct uart_port *up, int offset, unsigned int value)
{
sio_out(up, offset, sio_in(up, offset) | value);
}
static inline void
-sio_quot_set(struct uart_txx9_port *up, int quot)
+sio_quot_set(struct uart_port *up, int quot)
{
quot >>= 1;
if (quot < 256)
sio_out(up, TXX9_SIBGR, 0xff | TXX9_SIBGR_BCLK_T6);
}
-static struct uart_txx9_port *to_uart_txx9_port(struct uart_port *port)
-{
- return container_of(port, struct uart_txx9_port, port);
-}
-
-static void serial_txx9_stop_tx(struct uart_port *port)
+static void serial_txx9_stop_tx(struct uart_port *up)
{
- struct uart_txx9_port *up = to_uart_txx9_port(port);
sio_mask(up, TXX9_SIDICR, TXX9_SIDICR_TIE);
}
-static void serial_txx9_start_tx(struct uart_port *port)
+static void serial_txx9_start_tx(struct uart_port *up)
{
- struct uart_txx9_port *up = to_uart_txx9_port(port);
sio_set(up, TXX9_SIDICR, TXX9_SIDICR_TIE);
}
-static void serial_txx9_stop_rx(struct uart_port *port)
+static void serial_txx9_stop_rx(struct uart_port *up)
{
- struct uart_txx9_port *up = to_uart_txx9_port(port);
- up->port.read_status_mask &= ~TXX9_SIDISR_RDIS;
+ up->read_status_mask &= ~TXX9_SIDISR_RDIS;
}
-static void serial_txx9_initialize(struct uart_port *port)
+static void serial_txx9_initialize(struct uart_port *up)
{
- struct uart_txx9_port *up = to_uart_txx9_port(port);
unsigned int tmout = 10000;
sio_out(up, TXX9_SIFCR, TXX9_SIFCR_SWRST);
/* initial settings */
sio_out(up, TXX9_SILCR,
TXX9_SILCR_UMODE_8BIT | TXX9_SILCR_USBL_1BIT |
- ((up->port.flags & UPF_TXX9_USE_SCLK) ?
+ ((up->flags & UPF_TXX9_USE_SCLK) ?
TXX9_SILCR_SCS_SCLK_BG : TXX9_SILCR_SCS_IMCLK_BG));
- sio_quot_set(up, uart_get_divisor(port, 9600));
+ sio_quot_set(up, uart_get_divisor(up, 9600));
sio_out(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSTL_MAX /* 15 */);
sio_out(up, TXX9_SIDICR, 0);
}
static inline void
-receive_chars(struct uart_txx9_port *up, unsigned int *status)
+receive_chars(struct uart_port *up, unsigned int *status)
{
unsigned char ch;
unsigned int disr = *status;
do {
ch = sio_in(up, TXX9_SIRFIFO);
flag = TTY_NORMAL;
- up->port.icount.rx++;
+ up->icount.rx++;
/* mask out RFDN_MASK bit added by previous overrun */
next_ignore_status_mask =
- up->port.ignore_status_mask & ~TXX9_SIDISR_RFDN_MASK;
+ up->ignore_status_mask & ~TXX9_SIDISR_RFDN_MASK;
if (unlikely(disr & (TXX9_SIDISR_UBRK | TXX9_SIDISR_UPER |
TXX9_SIDISR_UFER | TXX9_SIDISR_UOER))) {
/*
*/
if (disr & TXX9_SIDISR_UBRK) {
disr &= ~(TXX9_SIDISR_UFER | TXX9_SIDISR_UPER);
- up->port.icount.brk++;
+ up->icount.brk++;
/*
* We do the SysRQ and SAK checking
* here because otherwise the break
* may get masked by ignore_status_mask
* or read_status_mask.
*/
- if (uart_handle_break(&up->port))
+ if (uart_handle_break(up))
goto ignore_char;
} else if (disr & TXX9_SIDISR_UPER)
- up->port.icount.parity++;
+ up->icount.parity++;
else if (disr & TXX9_SIDISR_UFER)
- up->port.icount.frame++;
+ up->icount.frame++;
if (disr & TXX9_SIDISR_UOER) {
- up->port.icount.overrun++;
+ up->icount.overrun++;
/*
* The receiver read buffer still hold
* a char which caused overrun.
/*
* Mask off conditions which should be ingored.
*/
- disr &= up->port.read_status_mask;
+ disr &= up->read_status_mask;
if (disr & TXX9_SIDISR_UBRK) {
flag = TTY_BREAK;
else if (disr & TXX9_SIDISR_UFER)
flag = TTY_FRAME;
}
- if (uart_handle_sysrq_char(&up->port, ch))
+ if (uart_handle_sysrq_char(up, ch))
goto ignore_char;
- uart_insert_char(&up->port, disr, TXX9_SIDISR_UOER, ch, flag);
+ uart_insert_char(up, disr, TXX9_SIDISR_UOER, ch, flag);
ignore_char:
- up->port.ignore_status_mask = next_ignore_status_mask;
+ up->ignore_status_mask = next_ignore_status_mask;
disr = sio_in(up, TXX9_SIDISR);
} while (!(disr & TXX9_SIDISR_UVALID) && (max_count-- > 0));
- tty_flip_buffer_push(&up->port.state->port);
+ tty_flip_buffer_push(&up->state->port);
*status = disr;
}
-static inline void transmit_chars(struct uart_txx9_port *up)
+static inline void transmit_chars(struct uart_port *up)
{
- struct circ_buf *xmit = &up->port.state->xmit;
+ struct circ_buf *xmit = &up->state->xmit;
int count;
- if (up->port.x_char) {
- sio_out(up, TXX9_SITFIFO, up->port.x_char);
- up->port.icount.tx++;
- up->port.x_char = 0;
+ if (up->x_char) {
+ sio_out(up, TXX9_SITFIFO, up->x_char);
+ up->icount.tx++;
+ up->x_char = 0;
return;
}
- if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
- serial_txx9_stop_tx(&up->port);
+ if (uart_circ_empty(xmit) || uart_tx_stopped(up)) {
+ serial_txx9_stop_tx(up);
return;
}
do {
sio_out(up, TXX9_SITFIFO, xmit->buf[xmit->tail]);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- up->port.icount.tx++;
+ up->icount.tx++;
if (uart_circ_empty(xmit))
break;
} while (--count > 0);
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(&up->port);
+ uart_write_wakeup(up);
if (uart_circ_empty(xmit))
- serial_txx9_stop_tx(&up->port);
+ serial_txx9_stop_tx(up);
}
static irqreturn_t serial_txx9_interrupt(int irq, void *dev_id)
{
int pass_counter = 0;
- struct uart_txx9_port *up = dev_id;
+ struct uart_port *up = dev_id;
unsigned int status;
while (1) {
- spin_lock(&up->port.lock);
+ spin_lock(&up->lock);
status = sio_in(up, TXX9_SIDISR);
if (!(sio_in(up, TXX9_SIDICR) & TXX9_SIDICR_TIE))
status &= ~TXX9_SIDISR_TDIS;
if (!(status & (TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS |
TXX9_SIDISR_TOUT))) {
- spin_unlock(&up->port.lock);
+ spin_unlock(&up->lock);
break;
}
sio_mask(up, TXX9_SIDISR,
TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS |
TXX9_SIDISR_TOUT);
- spin_unlock(&up->port.lock);
+ spin_unlock(&up->lock);
if (pass_counter++ > PASS_LIMIT)
break;
return pass_counter ? IRQ_HANDLED : IRQ_NONE;
}
-static unsigned int serial_txx9_tx_empty(struct uart_port *port)
+static unsigned int serial_txx9_tx_empty(struct uart_port *up)
{
- struct uart_txx9_port *up = to_uart_txx9_port(port);
unsigned long flags;
unsigned int ret;
- spin_lock_irqsave(&up->port.lock, flags);
+ spin_lock_irqsave(&up->lock, flags);
ret = (sio_in(up, TXX9_SICISR) & TXX9_SICISR_TXALS) ? TIOCSER_TEMT : 0;
- spin_unlock_irqrestore(&up->port.lock, flags);
+ spin_unlock_irqrestore(&up->lock, flags);
return ret;
}
-static unsigned int serial_txx9_get_mctrl(struct uart_port *port)
+static unsigned int serial_txx9_get_mctrl(struct uart_port *up)
{
- struct uart_txx9_port *up = to_uart_txx9_port(port);
unsigned int ret;
/* no modem control lines */
return ret;
}
-static void serial_txx9_set_mctrl(struct uart_port *port, unsigned int mctrl)
+static void serial_txx9_set_mctrl(struct uart_port *up, unsigned int mctrl)
{
- struct uart_txx9_port *up = to_uart_txx9_port(port);
if (mctrl & TIOCM_RTS)
sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSSC);
sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSSC);
}
-static void serial_txx9_break_ctl(struct uart_port *port, int break_state)
+static void serial_txx9_break_ctl(struct uart_port *up, int break_state)
{
- struct uart_txx9_port *up = to_uart_txx9_port(port);
unsigned long flags;
- spin_lock_irqsave(&up->port.lock, flags);
+ spin_lock_irqsave(&up->lock, flags);
if (break_state == -1)
sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK);
else
sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK);
- spin_unlock_irqrestore(&up->port.lock, flags);
+ spin_unlock_irqrestore(&up->lock, flags);
}
#if defined(CONFIG_SERIAL_TXX9_CONSOLE) || defined(CONFIG_CONSOLE_POLL)
/*
* Wait for transmitter & holding register to empty
*/
-static void wait_for_xmitr(struct uart_txx9_port *up)
+static void wait_for_xmitr(struct uart_port *up)
{
unsigned int tmout = 10000;
udelay(1);
/* Wait up to 1s for flow control if necessary */
- if (up->port.flags & UPF_CONS_FLOW) {
+ if (up->flags & UPF_CONS_FLOW) {
tmout = 1000000;
while (--tmout &&
(sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS))
* in an interrupt or debug context.
*/
-static int serial_txx9_get_poll_char(struct uart_port *port)
+static int serial_txx9_get_poll_char(struct uart_port *up)
{
unsigned int ier;
unsigned char c;
- struct uart_txx9_port *up = to_uart_txx9_port(port);
/*
* First save the IER then disable the interrupts
}
-static void serial_txx9_put_poll_char(struct uart_port *port, unsigned char c)
+static void serial_txx9_put_poll_char(struct uart_port *up, unsigned char c)
{
unsigned int ier;
- struct uart_txx9_port *up = to_uart_txx9_port(port);
/*
* First save the IER then disable the interrupts
#endif /* CONFIG_CONSOLE_POLL */
-static int serial_txx9_startup(struct uart_port *port)
+static int serial_txx9_startup(struct uart_port *up)
{
- struct uart_txx9_port *up = to_uart_txx9_port(port);
unsigned long flags;
int retval;
*/
sio_out(up, TXX9_SIDISR, 0);
- retval = request_irq(up->port.irq, serial_txx9_interrupt,
+ retval = request_irq(up->irq, serial_txx9_interrupt,
IRQF_SHARED, "serial_txx9", up);
if (retval)
return retval;
/*
* Now, initialize the UART
*/
- spin_lock_irqsave(&up->port.lock, flags);
- serial_txx9_set_mctrl(&up->port, up->port.mctrl);
- spin_unlock_irqrestore(&up->port.lock, flags);
+ spin_lock_irqsave(&up->lock, flags);
+ serial_txx9_set_mctrl(up, up->mctrl);
+ spin_unlock_irqrestore(&up->lock, flags);
/* Enable RX/TX */
sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_RSDE | TXX9_SIFLCR_TSDE);
return 0;
}
-static void serial_txx9_shutdown(struct uart_port *port)
+static void serial_txx9_shutdown(struct uart_port *up)
{
- struct uart_txx9_port *up = to_uart_txx9_port(port);
unsigned long flags;
/*
*/
sio_out(up, TXX9_SIDICR, 0); /* disable all intrs */
- spin_lock_irqsave(&up->port.lock, flags);
- serial_txx9_set_mctrl(&up->port, up->port.mctrl);
- spin_unlock_irqrestore(&up->port.lock, flags);
+ spin_lock_irqsave(&up->lock, flags);
+ serial_txx9_set_mctrl(up, up->mctrl);
+ spin_unlock_irqrestore(&up->lock, flags);
/*
* Disable break condition
sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK);
#ifdef CONFIG_SERIAL_TXX9_CONSOLE
- if (up->port.cons && up->port.line == up->port.cons->index) {
- free_irq(up->port.irq, up);
+ if (up->cons && up->line == up->cons->index) {
+ free_irq(up->irq, up);
return;
}
#endif
/* Disable RX/TX */
sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_RSDE | TXX9_SIFLCR_TSDE);
- free_irq(up->port.irq, up);
+ free_irq(up->irq, up);
}
static void
-serial_txx9_set_termios(struct uart_port *port, struct ktermios *termios,
+serial_txx9_set_termios(struct uart_port *up, struct ktermios *termios,
struct ktermios *old)
{
- struct uart_txx9_port *up = to_uart_txx9_port(port);
unsigned int cval, fcr = 0;
unsigned long flags;
unsigned int baud, quot;
/*
* Ask the core to calculate the divisor for us.
*/
- baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16/2);
- quot = uart_get_divisor(port, baud);
+ baud = uart_get_baud_rate(up, termios, old, 0, up->uartclk/16/2);
+ quot = uart_get_divisor(up, baud);
/* Set up FIFOs */
/* TX Int by FIFO Empty, RX Int by Receiving 1 char. */
* Ok, we're now changing the port state. Do it with
* interrupts disabled.
*/
- spin_lock_irqsave(&up->port.lock, flags);
+ spin_lock_irqsave(&up->lock, flags);
/*
* Update the per-port timeout.
*/
- uart_update_timeout(port, termios->c_cflag, baud);
+ uart_update_timeout(up, termios->c_cflag, baud);
- up->port.read_status_mask = TXX9_SIDISR_UOER |
+ up->read_status_mask = TXX9_SIDISR_UOER |
TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS;
if (termios->c_iflag & INPCK)
- up->port.read_status_mask |= TXX9_SIDISR_UFER | TXX9_SIDISR_UPER;
+ up->read_status_mask |= TXX9_SIDISR_UFER | TXX9_SIDISR_UPER;
if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
- up->port.read_status_mask |= TXX9_SIDISR_UBRK;
+ up->read_status_mask |= TXX9_SIDISR_UBRK;
/*
* Characteres to ignore
*/
- up->port.ignore_status_mask = 0;
+ up->ignore_status_mask = 0;
if (termios->c_iflag & IGNPAR)
- up->port.ignore_status_mask |= TXX9_SIDISR_UPER | TXX9_SIDISR_UFER;
+ up->ignore_status_mask |= TXX9_SIDISR_UPER | TXX9_SIDISR_UFER;
if (termios->c_iflag & IGNBRK) {
- up->port.ignore_status_mask |= TXX9_SIDISR_UBRK;
+ up->ignore_status_mask |= TXX9_SIDISR_UBRK;
/*
* If we're ignoring parity and break indicators,
* ignore overruns too (for real raw support).
*/
if (termios->c_iflag & IGNPAR)
- up->port.ignore_status_mask |= TXX9_SIDISR_UOER;
+ up->ignore_status_mask |= TXX9_SIDISR_UOER;
}
/*
* ignore all characters if CREAD is not set
*/
if ((termios->c_cflag & CREAD) == 0)
- up->port.ignore_status_mask |= TXX9_SIDISR_RDIS;
+ up->ignore_status_mask |= TXX9_SIDISR_RDIS;
/* CTS flow control flag */
if ((termios->c_cflag & CRTSCTS) &&
- (up->port.flags & UPF_TXX9_HAVE_CTS_LINE)) {
+ (up->flags & UPF_TXX9_HAVE_CTS_LINE)) {
sio_set(up, TXX9_SIFLCR,
TXX9_SIFLCR_RCS | TXX9_SIFLCR_TES);
} else {
sio_quot_set(up, quot);
sio_out(up, TXX9_SIFCR, fcr);
- serial_txx9_set_mctrl(&up->port, up->port.mctrl);
- spin_unlock_irqrestore(&up->port.lock, flags);
+ serial_txx9_set_mctrl(up, up->mctrl);
+ spin_unlock_irqrestore(&up->lock, flags);
}
static void
serial_txx9_initialize(port);
}
-static int serial_txx9_request_resource(struct uart_txx9_port *up)
+static int serial_txx9_request_resource(struct uart_port *up)
{
unsigned int size = TXX9_REGION_SIZE;
int ret = 0;
- switch (up->port.iotype) {
+ switch (up->iotype) {
default:
- if (!up->port.mapbase)
+ if (!up->mapbase)
break;
- if (!request_mem_region(up->port.mapbase, size, "serial_txx9")) {
+ if (!request_mem_region(up->mapbase, size, "serial_txx9")) {
ret = -EBUSY;
break;
}
- if (up->port.flags & UPF_IOREMAP) {
- up->port.membase = ioremap(up->port.mapbase, size);
- if (!up->port.membase) {
- release_mem_region(up->port.mapbase, size);
+ if (up->flags & UPF_IOREMAP) {
+ up->membase = ioremap(up->mapbase, size);
+ if (!up->membase) {
+ release_mem_region(up->mapbase, size);
ret = -ENOMEM;
}
}
break;
case UPIO_PORT:
- if (!request_region(up->port.iobase, size, "serial_txx9"))
+ if (!request_region(up->iobase, size, "serial_txx9"))
ret = -EBUSY;
break;
}
return ret;
}
-static void serial_txx9_release_resource(struct uart_txx9_port *up)
+static void serial_txx9_release_resource(struct uart_port *up)
{
unsigned int size = TXX9_REGION_SIZE;
- switch (up->port.iotype) {
+ switch (up->iotype) {
default:
- if (!up->port.mapbase)
+ if (!up->mapbase)
break;
- if (up->port.flags & UPF_IOREMAP) {
- iounmap(up->port.membase);
- up->port.membase = NULL;
+ if (up->flags & UPF_IOREMAP) {
+ iounmap(up->membase);
+ up->membase = NULL;
}
- release_mem_region(up->port.mapbase, size);
+ release_mem_region(up->mapbase, size);
break;
case UPIO_PORT:
- release_region(up->port.iobase, size);
+ release_region(up->iobase, size);
break;
}
}
-static void serial_txx9_release_port(struct uart_port *port)
+static void serial_txx9_release_port(struct uart_port *up)
{
- struct uart_txx9_port *up = to_uart_txx9_port(port);
serial_txx9_release_resource(up);
}
-static int serial_txx9_request_port(struct uart_port *port)
+static int serial_txx9_request_port(struct uart_port *up)
{
- struct uart_txx9_port *up = to_uart_txx9_port(port);
return serial_txx9_request_resource(up);
}
-static void serial_txx9_config_port(struct uart_port *port, int uflags)
+static void serial_txx9_config_port(struct uart_port *up, int uflags)
{
- struct uart_txx9_port *up = to_uart_txx9_port(port);
int ret;
/*
ret = serial_txx9_request_resource(up);
if (ret < 0)
return;
- port->type = PORT_TXX9;
- up->port.fifosize = TXX9_SIO_TX_FIFO;
+ up->type = PORT_TXX9;
+ up->fifosize = TXX9_SIO_TX_FIFO;
#ifdef CONFIG_SERIAL_TXX9_CONSOLE
- if (up->port.line == up->port.cons->index)
+ if (up->line == up->cons->index)
return;
#endif
- serial_txx9_initialize(port);
+ serial_txx9_initialize(up);
}
static const char *
#endif
};
-static struct uart_txx9_port serial_txx9_ports[UART_NR];
+static struct uart_port serial_txx9_ports[UART_NR];
static void __init serial_txx9_register_ports(struct uart_driver *drv,
struct device *dev)
int i;
for (i = 0; i < UART_NR; i++) {
- struct uart_txx9_port *up = &serial_txx9_ports[i];
+ struct uart_port *up = &serial_txx9_ports[i];
- up->port.line = i;
- up->port.ops = &serial_txx9_pops;
- up->port.dev = dev;
- if (up->port.iobase || up->port.mapbase)
- uart_add_one_port(drv, &up->port);
+ up->line = i;
+ up->ops = &serial_txx9_pops;
+ up->dev = dev;
+ if (up->iobase || up->mapbase)
+ uart_add_one_port(drv, up);
}
}
#ifdef CONFIG_SERIAL_TXX9_CONSOLE
-static void serial_txx9_console_putchar(struct uart_port *port, unsigned char ch)
+static void serial_txx9_console_putchar(struct uart_port *up, unsigned char ch)
{
- struct uart_txx9_port *up = to_uart_txx9_port(port);
-
wait_for_xmitr(up);
sio_out(up, TXX9_SITFIFO, ch);
}
static void
serial_txx9_console_write(struct console *co, const char *s, unsigned int count)
{
- struct uart_txx9_port *up = &serial_txx9_ports[co->index];
+ struct uart_port *up = &serial_txx9_ports[co->index];
unsigned int ier, flcr;
/*
* Disable flow-control if enabled (and unnecessary)
*/
flcr = sio_in(up, TXX9_SIFLCR);
- if (!(up->port.flags & UPF_CONS_FLOW) && (flcr & TXX9_SIFLCR_TES))
+ if (!(up->flags & UPF_CONS_FLOW) && (flcr & TXX9_SIFLCR_TES))
sio_out(up, TXX9_SIFLCR, flcr & ~TXX9_SIFLCR_TES);
- uart_console_write(&up->port, s, count, serial_txx9_console_putchar);
+ uart_console_write(up, s, count, serial_txx9_console_putchar);
/*
* Finally, wait for transmitter to become empty
static int __init serial_txx9_console_setup(struct console *co, char *options)
{
- struct uart_port *port;
- struct uart_txx9_port *up;
+ struct uart_port *up;
int baud = 9600;
int bits = 8;
int parity = 'n';
if (co->index >= UART_NR)
co->index = 0;
up = &serial_txx9_ports[co->index];
- port = &up->port;
- if (!port->ops)
+ if (!up->ops)
return -ENODEV;
- serial_txx9_initialize(&up->port);
+ serial_txx9_initialize(up);
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
- return uart_set_options(port, co, baud, parity, bits, flow);
+ return uart_set_options(up, co, baud, parity, bits, flow);
}
static struct uart_driver serial_txx9_reg;
if (port->line >= ARRAY_SIZE(serial_txx9_ports))
return -ENODEV;
- serial_txx9_ports[port->line].port = *port;
- serial_txx9_ports[port->line].port.ops = &serial_txx9_pops;
- serial_txx9_ports[port->line].port.flags |=
+ serial_txx9_ports[port->line] = *port;
+ serial_txx9_ports[port->line].ops = &serial_txx9_pops;
+ serial_txx9_ports[port->line].flags |=
UPF_BOOT_AUTOCONF | UPF_FIXED_PORT;
return 0;
}
static int serial_txx9_register_port(struct uart_port *port)
{
int i;
- struct uart_txx9_port *uart;
+ struct uart_port *uart;
int ret = -ENOSPC;
mutex_lock(&serial_txx9_mutex);
for (i = 0; i < UART_NR; i++) {
uart = &serial_txx9_ports[i];
- if (uart_match_port(&uart->port, port)) {
- uart_remove_one_port(&serial_txx9_reg, &uart->port);
+ if (uart_match_port(uart, port)) {
+ uart_remove_one_port(&serial_txx9_reg, uart);
break;
}
}
/* Find unused port */
for (i = 0; i < UART_NR; i++) {
uart = &serial_txx9_ports[i];
- if (!(uart->port.iobase || uart->port.mapbase))
+ if (!(uart->iobase || uart->mapbase))
break;
}
}
if (i < UART_NR) {
- uart->port.iobase = port->iobase;
- uart->port.membase = port->membase;
- uart->port.irq = port->irq;
- uart->port.uartclk = port->uartclk;
- uart->port.iotype = port->iotype;
- uart->port.flags = port->flags
+ uart->iobase = port->iobase;
+ uart->membase = port->membase;
+ uart->irq = port->irq;
+ uart->uartclk = port->uartclk;
+ uart->iotype = port->iotype;
+ uart->flags = port->flags
| UPF_BOOT_AUTOCONF | UPF_FIXED_PORT;
- uart->port.mapbase = port->mapbase;
+ uart->mapbase = port->mapbase;
if (port->dev)
- uart->port.dev = port->dev;
- ret = uart_add_one_port(&serial_txx9_reg, &uart->port);
+ uart->dev = port->dev;
+ ret = uart_add_one_port(&serial_txx9_reg, uart);
if (ret == 0)
- ret = uart->port.line;
+ ret = uart->line;
}
mutex_unlock(&serial_txx9_mutex);
return ret;
*/
static void serial_txx9_unregister_port(int line)
{
- struct uart_txx9_port *uart = &serial_txx9_ports[line];
+ struct uart_port *uart = &serial_txx9_ports[line];
mutex_lock(&serial_txx9_mutex);
- uart_remove_one_port(&serial_txx9_reg, &uart->port);
- uart->port.flags = 0;
- uart->port.type = PORT_UNKNOWN;
- uart->port.iobase = 0;
- uart->port.mapbase = 0;
- uart->port.membase = NULL;
- uart->port.dev = NULL;
+ uart_remove_one_port(&serial_txx9_reg, uart);
+ uart->flags = 0;
+ uart->type = PORT_UNKNOWN;
+ uart->iobase = 0;
+ uart->mapbase = 0;
+ uart->membase = NULL;
+ uart->dev = NULL;
mutex_unlock(&serial_txx9_mutex);
}
int i;
for (i = 0; i < UART_NR; i++) {
- struct uart_txx9_port *up = &serial_txx9_ports[i];
+ struct uart_port *up = &serial_txx9_ports[i];
- if (up->port.dev == &dev->dev)
+ if (up->dev == &dev->dev)
serial_txx9_unregister_port(i);
}
return 0;
int i;
for (i = 0; i < UART_NR; i++) {
- struct uart_txx9_port *up = &serial_txx9_ports[i];
+ struct uart_port *up = &serial_txx9_ports[i];
- if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev)
- uart_suspend_port(&serial_txx9_reg, &up->port);
+ if (up->type != PORT_UNKNOWN && up->dev == &dev->dev)
+ uart_suspend_port(&serial_txx9_reg, up);
}
return 0;
int i;
for (i = 0; i < UART_NR; i++) {
- struct uart_txx9_port *up = &serial_txx9_ports[i];
+ struct uart_port *up = &serial_txx9_ports[i];
- if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev)
- uart_resume_port(&serial_txx9_reg, &up->port);
+ if (up->type != PORT_UNKNOWN && up->dev == &dev->dev)
+ uart_resume_port(&serial_txx9_reg, up);
}
return 0;
static void pciserial_txx9_remove_one(struct pci_dev *dev)
{
- struct uart_txx9_port *up = pci_get_drvdata(dev);
+ struct uart_port *up = pci_get_drvdata(dev);
if (up) {
- serial_txx9_unregister_port(up->port.line);
+ serial_txx9_unregister_port(up->line);
pci_disable_device(dev);
}
}
#ifdef CONFIG_PM
static int pciserial_txx9_suspend_one(struct pci_dev *dev, pm_message_t state)
{
- struct uart_txx9_port *up = pci_get_drvdata(dev);
+ struct uart_port *up = pci_get_drvdata(dev);
if (up)
- uart_suspend_port(&serial_txx9_reg, &up->port);
+ uart_suspend_port(&serial_txx9_reg, up);
pci_save_state(dev);
pci_set_power_state(dev, pci_choose_state(dev, state));
return 0;
static int pciserial_txx9_resume_one(struct pci_dev *dev)
{
- struct uart_txx9_port *up = pci_get_drvdata(dev);
+ struct uart_port *up = pci_get_drvdata(dev);
pci_set_power_state(dev, PCI_D0);
pci_restore_state(dev);
if (up)
- uart_resume_port(&serial_txx9_reg, &up->port);
+ uart_resume_port(&serial_txx9_reg, up);
return 0;
}
#endif
platform_driver_unregister(&serial_txx9_plat_driver);
platform_device_unregister(serial_txx9_plat_devs);
for (i = 0; i < UART_NR; i++) {
- struct uart_txx9_port *up = &serial_txx9_ports[i];
- if (up->port.iobase || up->port.mapbase)
- uart_remove_one_port(&serial_txx9_reg, &up->port);
+ struct uart_port *up = &serial_txx9_ports[i];
+ if (up->iobase || up->mapbase)
+ uart_remove_one_port(&serial_txx9_reg, up);
}
uart_unregister_driver(&serial_txx9_reg);
projects / platform / kernel / linux-rpi.git / commitdiff