dmaengine: stm32-dmamux: Add PM Runtime support

Use pm_runtime engine for clock management purpose.

Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>

diff --git a/drivers/dma/stm32-dmamux.c b/drivers/dma/stm32-dmamux.c
index b922db9..a671191 100644 (file)
--- a/drivers/dma/stm32-dmamux.c
+++ b/drivers/dma/stm32-dmamux.c
@@ -28,6 +28,7 @@
 #include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/of_dma.h>
+#include <linux/pm_runtime.h>
 #include <linux/reset.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
@@ -79,8 +80,7 @@ static void stm32_dmamux_free(struct device *dev, void *route_data)
        stm32_dmamux_write(dmamux->iomem, STM32_DMAMUX_CCR(mux->chan_id), 0);
        clear_bit(mux->chan_id, dmamux->dma_inuse);
 
-       if (!IS_ERR(dmamux->clk))
-               clk_disable(dmamux->clk);
+       pm_runtime_put_sync(dev);
 
        spin_unlock_irqrestore(&dmamux->lock, flags);
 
@@ -146,13 +146,10 @@ static void *stm32_dmamux_route_allocate(struct of_phandle_args *dma_spec,
 
        /* Set dma request */
        spin_lock_irqsave(&dmamux->lock, flags);
-       if (!IS_ERR(dmamux->clk)) {
-               ret = clk_enable(dmamux->clk);
-               if (ret < 0) {
-                       spin_unlock_irqrestore(&dmamux->lock, flags);
-                       dev_err(&pdev->dev, "clk_prep_enable issue: %d\n", ret);
-                       goto error;
-               }
+       ret = pm_runtime_get_sync(&pdev->dev);
+       if (ret < 0) {
+               spin_unlock_irqrestore(&dmamux->lock, flags);
+               goto error;
        }
        spin_unlock_irqrestore(&dmamux->lock, flags);
 
@@ -254,6 +251,7 @@ static int stm32_dmamux_probe(struct platform_device *pdev)
                dev_warn(&pdev->dev, "DMAMUX defaulting on %u requests\n",
                         stm32_dmamux->dmamux_requests);
        }
+       pm_runtime_get_noresume(&pdev->dev);
 
        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
        iomem = devm_ioremap_resource(&pdev->dev, res);
@@ -282,6 +280,8 @@ static int stm32_dmamux_probe(struct platform_device *pdev)
        stm32_dmamux->dmarouter.route_free = stm32_dmamux_free;
 
        platform_set_drvdata(pdev, stm32_dmamux);
+       pm_runtime_set_active(&pdev->dev);
+       pm_runtime_enable(&pdev->dev);
 
        if (!IS_ERR(stm32_dmamux->clk)) {
                ret = clk_prepare_enable(stm32_dmamux->clk);
@@ -291,17 +291,52 @@ static int stm32_dmamux_probe(struct platform_device *pdev)
                }
        }
 
+       pm_runtime_get_noresume(&pdev->dev);
+
        /* Reset the dmamux */
        for (i = 0; i < stm32_dmamux->dma_requests; i++)
                stm32_dmamux_write(stm32_dmamux->iomem, STM32_DMAMUX_CCR(i), 0);
 
-       if (!IS_ERR(stm32_dmamux->clk))
-               clk_disable(stm32_dmamux->clk);
+       pm_runtime_put(&pdev->dev);
 
        return of_dma_router_register(node, stm32_dmamux_route_allocate,
                                     &stm32_dmamux->dmarouter);
 }
 
+#ifdef CONFIG_PM
+static int stm32_dmamux_runtime_suspend(struct device *dev)
+{
+       struct platform_device *pdev =
+               container_of(dev, struct platform_device, dev);
+       struct stm32_dmamux_data *stm32_dmamux = platform_get_drvdata(pdev);
+
+       clk_disable_unprepare(stm32_dmamux->clk);
+
+       return 0;
+}
+
+static int stm32_dmamux_runtime_resume(struct device *dev)
+{
+       struct platform_device *pdev =
+               container_of(dev, struct platform_device, dev);
+       struct stm32_dmamux_data *stm32_dmamux = platform_get_drvdata(pdev);
+       int ret;
+
+       ret = clk_prepare_enable(stm32_dmamux->clk);
+       if (ret) {
+               dev_err(&pdev->dev, "failed to prepare_enable clock\n");
+               return ret;
+       }
+
+       return 0;
+}
+#endif
+
+static const struct dev_pm_ops stm32_dmamux_pm_ops = {
+       SET_RUNTIME_PM_OPS(stm32_dmamux_runtime_suspend,
+                          stm32_dmamux_runtime_resume, NULL)
+};
+
 static const struct of_device_id stm32_dmamux_match[] = {
        { .compatible = "st,stm32h7-dmamux" },
        {},
@@ -312,6 +347,7 @@ static struct platform_driver stm32_dmamux_driver = {
        .driver = {
                .name = "stm32-dmamux",
                .of_match_table = stm32_dmamux_match,
+               .pm = &stm32_dmamux_pm_ops,
        },
 };