#include <linux/string.h>
#define NONE 0xFFFF
-
//--------------------------------------------------------------------------------
-
/* TYPE and SUBTYPE
* Define valid TYPE (or category or code-path, however you like to think of it)
* and SUBTYPE s.
* Type and SubType are treated as bitmasks.
*/
/*-----------------BEGIN TYPEs------------------------------------------*/
-#define DBG_TYPE_INITEXIT (1 << 0) // 1
-#define DBG_TYPE_TX (1 << 1) // 2
-#define DBG_TYPE_RX (1 << 2) // 4
-#define DBG_TYPE_OTHERS (1 << 3) // 8
+#define DBG_TYPE_INITEXIT (1 << 0) // 1
+#define DBG_TYPE_TX (1 << 1) // 2
+#define DBG_TYPE_RX (1 << 2) // 4
+#define DBG_TYPE_OTHERS (1 << 3) // 8
/*-----------------END TYPEs------------------------------------------*/
-#define NUMTYPES 4 // careful!
-
+#define NUMTYPES 4 // careful!
/*-----------------BEGIN SUBTYPEs---------------------------------------*/
/*-SUBTYPEs for TX : TYPE is DBG_TYPE_TX -----//
Transmit.c ,Arp.c, LeakyBucket.c, And Qos.c
total 17 macros */
// Transmit.c
-#define TX 1
-#define MP_SEND (TX<<0)
-#define NEXT_SEND (TX<<1)
-#define TX_FIFO (TX<<2)
-#define TX_CONTROL (TX<<3)
+#define TX 1
+#define MP_SEND (TX << 0)
+#define NEXT_SEND (TX << 1)
+#define TX_FIFO (TX << 2)
+#define TX_CONTROL (TX << 3)
// Arp.c
-#define IP_ADDR (TX<<4)
-#define ARP_REQ (TX<<5)
-#define ARP_RESP (TX<<6)
+#define IP_ADDR (TX << 4)
+#define ARP_REQ (TX << 5)
+#define ARP_RESP (TX << 6)
// Leakybucket.c
-#define TOKEN_COUNTS (TX<<8)
-#define CHECK_TOKENS (TX<<9)
-#define TX_PACKETS (TX<<10)
-#define TIMER (TX<<11)
+#define TOKEN_COUNTS (TX << 8)
+#define CHECK_TOKENS (TX << 9)
+#define TX_PACKETS (TX << 10)
+#define TIMER (TX << 11)
// Qos.c
-#define QOS TX
-#define QUEUE_INDEX (QOS<<12)
-#define IPV4_DBG (QOS<<13)
-#define IPV6_DBG (QOS<<14)
-#define PRUNE_QUEUE (QOS<<15)
-#define SEND_QUEUE (QOS<<16)
+#define QOS TX
+#define QUEUE_INDEX (QOS << 12)
+#define IPV4_DBG (QOS << 13)
+#define IPV6_DBG (QOS << 14)
+#define PRUNE_QUEUE (QOS << 15)
+#define SEND_QUEUE (QOS << 16)
//TX_Misc
-#define TX_OSAL_DBG (TX<<17)
-
+#define TX_OSAL_DBG (TX << 17)
//--SUBTYPEs for ------INIT & EXIT---------------------
/*------------ TYPE is DBG_TYPE_INITEXIT -----//
DriverEntry.c, bcmfwup.c, ChipDetectTask.c, HaltnReset.c, InterfaceDDR.c */
-#define MP 1
-#define DRV_ENTRY (MP<<0)
-#define MP_INIT (MP<<1)
-#define READ_REG (MP<<3)
-#define DISPATCH (MP<<2)
-#define CLAIM_ADAP (MP<<4)
-#define REG_IO_PORT (MP<<5)
-#define INIT_DISP (MP<<6)
-#define RX_INIT (MP<<7)
-
+#define MP 1
+#define DRV_ENTRY (MP << 0)
+#define MP_INIT (MP << 1)
+#define READ_REG (MP << 3)
+#define DISPATCH (MP << 2)
+#define CLAIM_ADAP (MP << 4)
+#define REG_IO_PORT (MP << 5)
+#define INIT_DISP (MP << 6)
+#define RX_INIT (MP << 7)
//-SUBTYPEs for --RX----------------------------------
//------------RX : TYPE is DBG_TYPE_RX -----//
// Receive.c
-#define RX 1
-#define RX_DPC (RX<<0)
-#define RX_CTRL (RX<<3)
-#define RX_DATA (RX<<4)
-#define MP_RETURN (RX<<1)
-#define LINK_MSG (RX<<2)
-
+#define RX 1
+#define RX_DPC (RX << 0)
+#define RX_CTRL (RX << 3)
+#define RX_DATA (RX << 4)
+#define MP_RETURN (RX << 1)
+#define LINK_MSG (RX << 2)
//-SUBTYPEs for ----OTHER ROUTINES------------------
//------------OTHERS : TYPE is DBG_TYPE_OTHER -----//
// HaltnReset,CheckForHang,PnP,Misc,CmHost
// total 12 macros
-#define OTHERS 1
+#define OTHERS 1
// ??ISR.C
-
-#define ISR OTHERS
-#define MP_DPC (ISR<<0)
+#define ISR OTHERS
+#define MP_DPC (ISR << 0)
// HaltnReset.c
-#define HALT OTHERS
-#define MP_HALT (HALT<<1)
-#define CHECK_HANG (HALT<<2)
-#define MP_RESET (HALT<<3)
-#define MP_SHUTDOWN (HALT<<4)
+#define HALT OTHERS
+#define MP_HALT (HALT << 1)
+#define CHECK_HANG (HALT << 2)
+#define MP_RESET (HALT << 3)
+#define MP_SHUTDOWN (HALT << 4)
// pnp.c
-#define PNP OTHERS
-#define MP_PNP (PNP<<5)
+#define PNP OTHERS
+#define MP_PNP (PNP << 5)
// Misc.c
-#define MISC OTHERS
-#define DUMP_INFO (MISC<<6)
-#define CLASSIFY (MISC<<7)
-#define LINK_UP_MSG (MISC<<8)
-#define CP_CTRL_PKT (MISC<<9)
-#define DUMP_CONTROL (MISC<<10)
-#define LED_DUMP_INFO (MISC<<11)
+#define MISC OTHERS
+#define DUMP_INFO (MISC << 6)
+#define CLASSIFY (MISC << 7)
+#define LINK_UP_MSG (MISC << 8)
+#define CP_CTRL_PKT (MISC << 9)
+#define DUMP_CONTROL (MISC << 10)
+#define LED_DUMP_INFO (MISC << 11)
// CmHost.c
-#define CMHOST OTHERS
-
-
-#define SERIAL (OTHERS<<12)
-#define IDLE_MODE (OTHERS<<13)
-
-#define WRM (OTHERS<<14)
-#define RDM (OTHERS<<15)
+#define CMHOST OTHERS
+#define SERIAL (OTHERS << 12)
+#define IDLE_MODE (OTHERS << 13)
+#define WRM (OTHERS << 14)
+#define RDM (OTHERS << 15)
// TODO - put PHS_SEND in Tx PHS_RECEIVE in Rx path ?
-#define PHS_SEND (OTHERS<<16)
-#define PHS_RECEIVE (OTHERS<<17)
-#define PHS_MODULE (OTHERS<<18)
-
-#define INTF_INIT (OTHERS<<19)
-#define INTF_ERR (OTHERS<<20)
-#define INTF_WARN (OTHERS<<21)
-#define INTF_NORM (OTHERS<<22)
-
-#define IRP_COMPLETION (OTHERS<<23)
-#define SF_DESCRIPTOR_CNTS (OTHERS<<24)
-#define PHS_DISPATCH (OTHERS << 25)
-#define OSAL_DBG (OTHERS << 26)
-#define NVM_RW (OTHERS << 27)
-
-#define HOST_MIBS (OTHERS << 28)
-#define CONN_MSG (CMHOST << 29)
+#define PHS_SEND (OTHERS << 16)
+#define PHS_RECEIVE (OTHERS << 17)
+#define PHS_MODULE (OTHERS << 18)
+
+#define INTF_INIT (OTHERS << 19)
+#define INTF_ERR (OTHERS << 20)
+#define INTF_WARN (OTHERS << 21)
+#define INTF_NORM (OTHERS << 22)
+
+#define IRP_COMPLETION (OTHERS << 23)
+#define SF_DESCRIPTOR_CNTS (OTHERS << 24)
+#define PHS_DISPATCH (OTHERS << 25)
+#define OSAL_DBG (OTHERS << 26)
+#define NVM_RW (OTHERS << 27)
+
+#define HOST_MIBS (OTHERS << 28)
+#define CONN_MSG (CMHOST << 29)
/*-----------------END SUBTYPEs------------------------------------------*/
-
/* Debug level
* We have 8 debug levels, in (numerical) increasing order of verbosity.
* IMP: Currently implementing ONLY DBG_LVL_ALL , i.e. , all debug prints will
* You can compile-time change that to any of the below, if you wish to. However, as of now, there's
* no dynamic facility to have the userspace 'TestApp' set debug_level. Slated for future expansion.
*/
-#define BCM_ALL 7
-#define BCM_LOW 6
-#define BCM_PRINT 5
-#define BCM_NORMAL 4
-#define BCM_MEDIUM 3
-#define BCM_SCREAM 2
-#define BCM_ERR 1
+#define BCM_ALL 7
+#define BCM_LOW 6
+#define BCM_PRINT 5
+#define BCM_NORMAL 4
+#define BCM_MEDIUM 3
+#define BCM_SCREAM 2
+#define BCM_ERR 1
/* Not meant for developer in debug prints.
* To be used to disable all prints by setting the DBG_LVL_CURR to this value */
-#define BCM_NONE 0
+#define BCM_NONE 0
/* The current driver logging level.
* Everything at this level and (numerically) lower (meaning higher prio)
*/
#define DBG_LVL_CURR (BCM_ALL)
-#define DBG_LVL_ALL BCM_ALL
+#define DBG_LVL_ALL BCM_ALL
/*---Userspace mapping of Debug State.
* Delibrately matches that of the Windows driver..
if (DBG_TYPE_PRINTK == Type) \
pr_info("%s:" string, __func__, ##args); \
else if (Adapter && \
- (dbg_level & DBG_LVL_BITMASK) <= Adapter->stDebugState.debug_level && \
- (Type & Adapter->stDebugState.type) && \
- (SubType & Adapter->stDebugState.subtype[Type])) { \
+ (dbg_level & DBG_LVL_BITMASK) <= Adapter->stDebugState.debug_level && \
+ (Type & Adapter->stDebugState.type) && \
+ (SubType & Adapter->stDebugState.subtype[Type])) { \
if (dbg_level & DBG_NO_FUNC_PRINT) \
printk(KERN_DEBUG string, ##args); \
else \
- printk(KERN_DEBUG "%s:" string, __func__, ##args); \
+ printk(KERN_DEBUG "%s:" string, __func__, ##args); \
+ } \
+ } while (0)
+
+#define BCM_DEBUG_PRINT_BUFFER(Adapter, Type, SubType, dbg_level, buffer, bufferlen) \
+ do { \
+ if (DBG_TYPE_PRINTK == Type || \
+ (Adapter && \
+ (dbg_level & DBG_LVL_BITMASK) <= Adapter->stDebugState.debug_level && \
+ (Type & Adapter->stDebugState.type) && \
+ (SubType & Adapter->stDebugState.subtype[Type]))) { \
+ printk(KERN_DEBUG "%s:\n", __func__); \
+ print_hex_dump(KERN_DEBUG, " ", DUMP_PREFIX_OFFSET, \
+ 16, 1, buffer, bufferlen, false); \
} \
} while (0)
-#define BCM_DEBUG_PRINT_BUFFER(Adapter, Type, SubType, dbg_level, buffer, bufferlen) do { \
- if (DBG_TYPE_PRINTK == Type || \
- (Adapter && \
- (dbg_level & DBG_LVL_BITMASK) <= Adapter->stDebugState.debug_level && \
- (Type & Adapter->stDebugState.type) && \
- (SubType & Adapter->stDebugState.subtype[Type]))) { \
- printk(KERN_DEBUG "%s:\n", __func__); \
- print_hex_dump(KERN_DEBUG, " ", DUMP_PREFIX_OFFSET, \
- 16, 1, buffer, bufferlen, false); \
- } \
-} while(0)
-
-
-#define BCM_SHOW_DEBUG_BITMAP(Adapter) do { \
- int i; \
- for (i=0; i<(NUMTYPES*2)+1; i++) { \
+#define BCM_SHOW_DEBUG_BITMAP(Adapter) do { \
+ int i; \
+ for (i = 0; i < (NUMTYPES * 2) + 1; i++) { \
if ((i == 1) || (i == 2) || (i == 4) || (i == 8)) { \
- /* CAUTION! Forcefully turn on ALL debug paths and subpaths! \
- Adapter->stDebugState.subtype[i] = 0xffffffff; */ \
- BCM_DEBUG_PRINT (Adapter, DBG_TYPE_PRINTK, 0, 0, "subtype[%d] = 0x%08x\n", \
- i, Adapter->stDebugState.subtype[i]); \
+ /* CAUTION! Forcefully turn on ALL debug paths and subpaths! \
+ Adapter->stDebugState.subtype[i] = 0xffffffff; */ \
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "subtype[%d] = 0x%08x\n", \
+ i, Adapter->stDebugState.subtype[i]); \
} \
} \
} while (0)
#endif
-
projects / kernel / kernel-generic.git / commitdiff