irqchip/exiu: Fix acknowledgment of edge triggered interrupts

Currently the EXIU uses the fasteoi interrupt flow that is configured by
it's parent (irq-gic-v3.c). With this flow the only chance to clear the
interrupt request happens during .irq_eoi() and (obviously) this happens
after the interrupt handler has run. EXIU requires edge triggered
interrupts to be acked prior to interrupt handling. Without this we
risk incorrect interrupt dismissal when a new interrupt is delivered
after the handler reads and acknowledges the peripheral but before the
irq_eoi() takes place.

Fix this by clearing the interrupt request from .irq_ack() if we are
configured for edge triggered interrupts. This requires adopting the
fasteoi-ack flow instead of the fasteoi to ensure the ack gets called.

These changes have been tested using the power button on a
Developerbox/SC2A11 combined with some hackery in gpio-keys so I can
play with the different trigger mode [and an mdelay(500) so I can
can check what happens on a double click in both modes].

Fixes: 706cffc1b912 ("irqchip/exiu: Add support for Socionext Synquacer EXIU controller")
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220503134541.2566457-1-daniel.thompson@linaro.org

diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 30b123c..aaeaf57 100644 (file)
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -253,6 +253,7 @@ config ARCH_INTEL_SOCFPGA
 
 config ARCH_SYNQUACER
        bool "Socionext SynQuacer SoC Family"
+       select IRQ_FASTEOI_HIERARCHY_HANDLERS
 
 config ARCH_TEGRA
        bool "NVIDIA Tegra SoC Family"

diff --git a/drivers/irqchip/irq-sni-exiu.c b/drivers/irqchip/irq-sni-exiu.c
index abd011f..c7db617 100644 (file)
--- a/drivers/irqchip/irq-sni-exiu.c
+++ b/drivers/irqchip/irq-sni-exiu.c
@@ -37,11 +37,26 @@ struct exiu_irq_data {
        u32             spi_base;
 };
 
-static void exiu_irq_eoi(struct irq_data *d)
+static void exiu_irq_ack(struct irq_data *d)
 {
        struct exiu_irq_data *data = irq_data_get_irq_chip_data(d);
 
        writel(BIT(d->hwirq), data->base + EIREQCLR);
+}
+
+static void exiu_irq_eoi(struct irq_data *d)
+{
+       struct exiu_irq_data *data = irq_data_get_irq_chip_data(d);
+
+       /*
+        * Level triggered interrupts are latched and must be cleared during
+        * EOI or the interrupt will be jammed on. Of course if a level
+        * triggered interrupt is still asserted then the write will not clear
+        * the interrupt.
+        */
+       if (irqd_is_level_type(d))
+               writel(BIT(d->hwirq), data->base + EIREQCLR);
+
        irq_chip_eoi_parent(d);
 }
 
@@ -91,10 +106,13 @@ static int exiu_irq_set_type(struct irq_data *d, unsigned int type)
        writel_relaxed(val, data->base + EILVL);
 
        val = readl_relaxed(data->base + EIEDG);
-       if (type == IRQ_TYPE_LEVEL_LOW || type == IRQ_TYPE_LEVEL_HIGH)
+       if (type == IRQ_TYPE_LEVEL_LOW || type == IRQ_TYPE_LEVEL_HIGH) {
                val &= ~BIT(d->hwirq);
-       else
+               irq_set_handler_locked(d, handle_fasteoi_irq);
+       } else {
                val |= BIT(d->hwirq);
+               irq_set_handler_locked(d, handle_fasteoi_ack_irq);
+       }
        writel_relaxed(val, data->base + EIEDG);
 
        writel_relaxed(BIT(d->hwirq), data->base + EIREQCLR);
@@ -104,6 +122,7 @@ static int exiu_irq_set_type(struct irq_data *d, unsigned int type)
 
 static struct irq_chip exiu_irq_chip = {
        .name                   = "EXIU",
+       .irq_ack                = exiu_irq_ack,
        .irq_eoi                = exiu_irq_eoi,
        .irq_enable             = exiu_irq_enable,
        .irq_mask               = exiu_irq_mask,