spi: bcm-qspi: when tx/rx buffer is NULL set to 0

Currently we set the tx/rx buffer to 0xff when NULL. This causes
problems with some spi slaves where 0xff is a valid command. Looking
at other drivers, the tx/rx buffer is usually set to 0x00 when NULL.
Following this convention solves the issue.

Fixes: fa236a7ef240 ("spi: bcm-qspi: Add Broadcom MSPI driver")
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200420190853.45614-6-kdasu.kdev@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c
index 22f9fe1..afed1ea 100644 (file)
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -666,7 +666,7 @@ static void read_from_hw(struct bcm_qspi *qspi, int slots)
                        if (buf)
                                buf[tp.byte] = read_rxram_slot_u8(qspi, slot);
                        dev_dbg(&qspi->pdev->dev, "RD %02x\n",
-                               buf ? buf[tp.byte] : 0xff);
+                               buf ? buf[tp.byte] : 0x0);
                } else {
                        u16 *buf = tp.trans->rx_buf;
 
@@ -674,7 +674,7 @@ static void read_from_hw(struct bcm_qspi *qspi, int slots)
                                buf[tp.byte / 2] = read_rxram_slot_u16(qspi,
                                                                      slot);
                        dev_dbg(&qspi->pdev->dev, "RD %04x\n",
-                               buf ? buf[tp.byte] : 0xffff);
+                               buf ? buf[tp.byte / 2] : 0x0);
                }
 
                update_qspi_trans_byte_count(qspi, &tp,
@@ -729,13 +729,13 @@ static int write_to_hw(struct bcm_qspi *qspi, struct spi_device *spi)
        while (!tstatus && slot < MSPI_NUM_CDRAM) {
                if (tp.trans->bits_per_word <= 8) {
                        const u8 *buf = tp.trans->tx_buf;
-                       u8 val = buf ? buf[tp.byte] : 0xff;
+                       u8 val = buf ? buf[tp.byte] : 0x00;
 
                        write_txram_slot_u8(qspi, slot, val);
                        dev_dbg(&qspi->pdev->dev, "WR %02x\n", val);
                } else {
                        const u16 *buf = tp.trans->tx_buf;
-                       u16 val = buf ? buf[tp.byte / 2] : 0xffff;
+                       u16 val = buf ? buf[tp.byte / 2] : 0x0000;
 
                        write_txram_slot_u16(qspi, slot, val);
                        dev_dbg(&qspi->pdev->dev, "WR %04x\n", val);