2018-04-16 Alan Modra <amodra@gmail.com>
+ * Makefile.am: Remove sh-symbianelf support.
+ * config.bfd: Likewise.
+ * configure.ac: Likewise.
+ * targets.c: Likewise.
+ * elf32-sh-symbian.c: Delete.
+ * Makefile.in: Regenerate.
+ * configure: Regenerate.
+ * po/SRC-POTFILES.in: Regenerate.
+
+2018-04-16 Alan Modra <amodra@gmail.com>
+
* Makefile.am: Remove vax-bsd and vax-ultrix support.
* config.bfd: Likewise.
* configure.ac: Likewise.
elf32-rl78.lo \
elf32-rx.lo \
elf32-s390.lo \
- elf32-sh-symbian.lo \
elf32-sh.lo \
elf32-sh64-com.lo \
elf32-sh64.lo \
elf32-rl78.c \
elf32-rx.c \
elf32-s390.c \
- elf32-sh-symbian.c \
elf32-sh.c \
elf32-sh64-com.c \
elf32-sh64.c \
elf32-rl78.lo \
elf32-rx.lo \
elf32-s390.lo \
- elf32-sh-symbian.lo \
elf32-sh.lo \
elf32-sh64-com.lo \
elf32-sh64.lo \
elf32-rl78.c \
elf32-rx.c \
elf32-s390.c \
- elf32-sh-symbian.c \
elf32-sh.c \
elf32-sh64-com.c \
elf32-sh64.c \
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf32-s390.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf32-score.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf32-score7.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf32-sh-symbian.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf32-sh.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf32-sh64-com.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf32-sh64.Plo@am__quote@
mips*-*-lnews* | \
mips*-*-sysv* | mips*-*-riscos* | \
powerpc-*-lynxos* | powerpc-*-windiss* | \
- sh*-*-symbianelf* | \
sparclet-*-aout* | \
sparc86x-*-aout* | \
sparc*-*-chorus* | \
m88*-*-* | \
maxq-*-coff | \
mips*el-*-rtems* | \
+ sh*-*-symbianelf* | \
sparc-*-lynxos* | \
tahoe-*-* | \
vax-*-bsd* | vax-*-ultrix* | vax-*-vms* | \
targ_defvec=sh_elf32_nbsd_vec
targ_selvecs="sh_elf32_nbsd_le_vec sh_coff_vec sh_coff_le_vec"
;;
- sh*-*-symbianelf*)
- targ_defvec=sh_elf32_symbian_le_vec
- targ_selvecs="sh_coff_le_vec sh_coff_small_le_vec"
- targ_underscore=yes
- ;;
#ifdef BFD64
shl*-*-elf* | sh[1234]l*-*-elf* | sh3el*-*-elf* | shl*-*-kaos*)
sh_elf32_linux_be_vec) tb="$tb elf32-sh.lo elf-vxworks.lo elf32.lo $elf coff-sh.lo $coff" ;;
sh_elf32_nbsd_vec) tb="$tb elf32-sh.lo elf-vxworks.lo elf32.lo $elf coff-sh.lo $coff" ;;
sh_elf32_nbsd_le_vec) tb="$tb elf32-sh.lo elf-vxworks.lo elf32.lo $elf coff-sh.lo $coff" ;;
- sh_elf32_symbian_le_vec) tb="$tb elf32-sh-symbian.lo elf32-sh64-com.lo elf-vxworks.lo elf32.lo $elf coff-sh.lo $coff" ;;
sh_elf32_vxworks_vec) tb="$tb elf32-sh.lo elf-vxworks.lo elf32.lo $elf coff-sh.lo $coff" ;;
sh_elf32_vxworks_le_vec) tb="$tb elf32-sh.lo elf-vxworks.lo elf32.lo $elf coff-sh.lo $coff" ;;
sh_pe_le_vec) tb="$tb pe-sh.lo coff-sh.lo peigen.lo $coff" ;;
sh_elf32_linux_be_vec) tb="$tb elf32-sh.lo elf-vxworks.lo elf32.lo $elf coff-sh.lo $coff" ;;
sh_elf32_nbsd_vec) tb="$tb elf32-sh.lo elf-vxworks.lo elf32.lo $elf coff-sh.lo $coff" ;;
sh_elf32_nbsd_le_vec) tb="$tb elf32-sh.lo elf-vxworks.lo elf32.lo $elf coff-sh.lo $coff" ;;
- sh_elf32_symbian_le_vec) tb="$tb elf32-sh-symbian.lo elf32-sh64-com.lo elf-vxworks.lo elf32.lo $elf coff-sh.lo $coff" ;;
sh_elf32_vxworks_vec) tb="$tb elf32-sh.lo elf-vxworks.lo elf32.lo $elf coff-sh.lo $coff" ;;
sh_elf32_vxworks_le_vec) tb="$tb elf32-sh.lo elf-vxworks.lo elf32.lo $elf coff-sh.lo $coff" ;;
sh_pe_le_vec) tb="$tb pe-sh.lo coff-sh.lo peigen.lo $coff" ;;
+++ /dev/null
-/* Renesas / SuperH specific support for Symbian 32-bit ELF files
- Copyright (C) 2004-2018 Free Software Foundation, Inc.
- Contributed by Red Hat
-
- This file is part of BFD, the Binary File Descriptor library.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
- MA 02110-1301, USA. */
-
-
-/* Stop elf32-sh.c from defining any target vectors. */
-#define SH_TARGET_ALREADY_DEFINED
-#define sh_find_elf_flags sh_symbian_find_elf_flags
-#define sh_elf_get_flags_from_mach sh_symbian_elf_get_flags_from_mach
-#include "elf32-sh.c"
-
-
-//#define SYMBIAN_DEBUG 1
-#define SYMBIAN_DEBUG 0
-
-#define DIRECTIVE_HEADER "#<SYMEDIT>#\n"
-#define DIRECTIVE_IMPORT "IMPORT "
-#define DIRECTIVE_EXPORT "EXPORT "
-#define DIRECTIVE_AS "AS "
-
-/* Macro to advance 's' until either it reaches 'e' or the
- character pointed to by 's' is equal to 'c'. If 'e' is
- reached and SYMBIAN_DEBUG is enabled then the error message 'm'
- is displayed. */
-#define SKIP_UNTIL(s,e,c,m) \
- do \
- { \
- while (s < e && *s != c) \
- ++ s; \
- if (s >= e) \
- { \
- if (SYMBIAN_DEBUG) \
- fprintf (stderr, "Corrupt directive: %s\n", m); \
- result = FALSE; \
- } \
- } \
- while (0); \
- if (!result) \
- break;
-
-/* Like SKIP_UNTIL except there are two terminator characters
- c1 and c2. */
-#define SKIP_UNTIL2(s,e,c1,c2,m) \
- do \
- { \
- while (s < e && *s != c1 && *s != c2) \
- ++ s; \
- if (s >= e) \
- { \
- if (SYMBIAN_DEBUG) \
- fprintf (stderr, "Corrupt directive: %s\n", m); \
- result = FALSE; \
- } \
- } \
- while (0); \
- if (!result) \
- break;
-
-/* Macro to advance 's' until either it reaches 'e' or the
- character pointed to by 's' is not equal to 'c'. If 'e'
- is reached and SYMBIAN_DEBUG is enabled then the error message
- 'm' is displayed. */
-#define SKIP_WHILE(s,e,c,m) \
- do \
- { \
- while (s < e && *s == c) \
- ++ s; \
- if (s >= e) \
- { \
- if (SYMBIAN_DEBUG) \
- fprintf (stderr, "Corrupt directive: %s\n", m); \
- result = FALSE; \
- } \
- } \
- while (0); \
- if (!result) \
- break;
-
-
-typedef struct symbol_rename
-{
- struct symbol_rename * next;
- char * current_name;
- char * new_name;
- struct elf_link_hash_entry * current_hash;
- unsigned long new_symndx;
-}
-symbol_rename;
-
-static symbol_rename * rename_list = NULL;
-
-/* Accumulate a list of symbols to be renamed. */
-
-static bfd_boolean
-sh_symbian_import_as (struct bfd_link_info *info, bfd * abfd,
- char * current_name, char * new_name)
-{
- struct elf_link_hash_entry * new_hash;
- symbol_rename * node;
-
- if (SYMBIAN_DEBUG)
- fprintf (stderr, "IMPORT '%s' AS '%s'\n", current_name, new_name);
-
- for (node = rename_list; node; node = node->next)
- if (strcmp (node->current_name, current_name) == 0)
- {
- if (strcmp (node->new_name, new_name) == 0)
- /* Already added to rename list. */
- return TRUE;
-
- bfd_set_error (bfd_error_invalid_operation);
- /* xgettext:c-format */
- _bfd_error_handler (_("%pB: IMPORT AS directive for %s conceals previous IMPORT AS"),
- abfd, current_name);
- return FALSE;
- }
-
- if ((node = bfd_malloc (sizeof * node)) == NULL)
- {
- if (SYMBIAN_DEBUG)
- fprintf (stderr, "IMPORT AS: No mem for new rename node\n");
- return FALSE;
- }
-
- if ((node->current_name = bfd_malloc (strlen (current_name) + 1)) == NULL)
- {
- if (SYMBIAN_DEBUG)
- fprintf (stderr, "IMPORT AS: No mem for current name field in rename node\n");
- free (node);
- return FALSE;
- }
- else
- strcpy (node->current_name, current_name);
-
- if ((node->new_name = bfd_malloc (strlen (new_name) + 1)) == NULL)
- {
- if (SYMBIAN_DEBUG)
- fprintf (stderr, "IMPORT AS: No mem for new name field in rename node\n");
- free (node->current_name);
- free (node);
- return FALSE;
- }
- else
- strcpy (node->new_name, new_name);
-
- node->next = rename_list;
- node->current_hash = NULL;
- node->new_symndx = 0;
- rename_list = node;
-
- new_hash = elf_link_hash_lookup (elf_hash_table (info), node->new_name, TRUE, FALSE, TRUE);
- bfd_elf_link_record_dynamic_symbol (info, new_hash);
- if (new_hash->root.type == bfd_link_hash_new)
- new_hash->root.type = bfd_link_hash_undefined;
-
- return TRUE;
-}
-
-
-static bfd_boolean
-sh_symbian_import (bfd * abfd ATTRIBUTE_UNUSED, char * name)
-{
- if (SYMBIAN_DEBUG)
- fprintf (stderr, "IMPORT '%s'\n", name);
-
- /* XXX: Generate an import somehow ? */
-
- return TRUE;
-}
-
-static bfd_boolean
-sh_symbian_export (bfd * abfd ATTRIBUTE_UNUSED, char * name)
-{
- if (SYMBIAN_DEBUG)
- fprintf (stderr, "EXPORT '%s'\n", name);
-
- /* XXX: Generate an export somehow ? */
-
- return TRUE;
-}
-
-/* Process any magic embedded commands in the .directive. section.
- Returns TRUE upon sucecss, but if it fails it sets bfd_error and
- returns FALSE. */
-
-static bfd_boolean
-sh_symbian_process_embedded_commands (struct bfd_link_info *info, bfd * abfd,
- asection * sec, bfd_byte * contents)
-{
- char *s;
- char *e;
- bfd_boolean result = TRUE;
- bfd_size_type sz = sec->rawsize ? sec->rawsize : sec->size;
-
- for (s = (char *) contents, e = s + sz; s < e;)
- {
- char * directive = s;
-
- switch (*s)
- {
- /* I want to use "case DIRECTIVE_HEADER [0]:" here but gcc won't let me :-( */
- case '#':
- if (strcmp (s, DIRECTIVE_HEADER))
- result = FALSE;
- else
- /* Just ignore the header.
- XXX: Strictly speaking we ought to check that the header
- is present and that it is the first thing in the file. */
- s += strlen (DIRECTIVE_HEADER) + 1;
- break;
-
- case 'I':
- if (! CONST_STRNEQ (s, DIRECTIVE_IMPORT))
- result = FALSE;
- else
- {
- char * new_name;
- char * new_name_end;
- char name_end_char;
-
- /* Skip the IMPORT directive. */
- s += strlen (DIRECTIVE_IMPORT);
-
- new_name = s;
- /* Find the end of the new name. */
- while (s < e && *s != ' ' && *s != '\n')
- ++ s;
- if (s >= e)
- {
- /* We have reached the end of the .directive section
- without encountering a string terminator. This is
- allowed for IMPORT directives. */
- new_name_end = e - 1;
- name_end_char = * new_name_end;
- * new_name_end = 0;
- result = sh_symbian_import (abfd, new_name);
- * new_name_end = name_end_char;
- break;
- }
-
- /* Remember where the name ends. */
- new_name_end = s;
- /* Skip any whitespace before the 'AS'. */
- SKIP_WHILE (s, e, ' ', "IMPORT: Name just followed by spaces");
- /* Terminate the new name. (Do this after skiping...) */
- name_end_char = * new_name_end;
- * new_name_end = 0;
-
- /* Check to see if 'AS '... is present. If so we have an
- IMPORT AS directive, otherwise we have an IMPORT directive. */
- if (! CONST_STRNEQ (s, DIRECTIVE_AS))
- {
- /* Skip the new-line at the end of the name. */
- if (SYMBIAN_DEBUG && name_end_char != '\n')
- fprintf (stderr, "IMPORT: No newline at end of directive\n");
- else
- s ++;
-
- result = sh_symbian_import (abfd, new_name);
-
- /* Skip past the NUL character. */
- if (* s ++ != 0)
- {
- if (SYMBIAN_DEBUG)
- fprintf (stderr, "IMPORT: No NUL at end of directive\n");
- }
- }
- else
- {
- char * current_name;
- char * current_name_end;
- char current_name_end_char;
-
- /* Skip the 'AS '. */
- s += strlen (DIRECTIVE_AS);
- /* Skip any white space after the 'AS '. */
- SKIP_WHILE (s, e, ' ', "IMPORT AS: Nothing after AS");
- current_name = s;
- /* Find the end of the current name. */
- SKIP_UNTIL2 (s, e, ' ', '\n', "IMPORT AS: No newline at the end of the current name");
- /* Skip (backwards) over spaces at the end of the current name. */
- current_name_end = s;
- current_name_end_char = * current_name_end;
-
- SKIP_WHILE (s, e, ' ', "IMPORT AS: Current name just followed by spaces");
- /* Skip past the newline character. */
- if (* s ++ != '\n')
- if (SYMBIAN_DEBUG)
- fprintf (stderr, "IMPORT AS: No newline at end of directive\n");
-
- /* Terminate the current name after having performed the skips. */
- * current_name_end = 0;
-
- result = sh_symbian_import_as (info, abfd, current_name, new_name);
-
- /* The next character should be a NUL. */
- if (* s != 0)
- {
- if (SYMBIAN_DEBUG)
- fprintf (stderr, "IMPORT AS: Junk at end of directive\n");
- result = FALSE;
- }
- s ++;
-
- * current_name_end = current_name_end_char;
- }
-
- /* Restore the characters we overwrote, since
- the .directive section will be emitted. */
- * new_name_end = name_end_char;
- }
- break;
-
- case 'E':
- if (! CONST_STRNEQ (s, DIRECTIVE_EXPORT))
- result = FALSE;
- else
- {
- char * name;
- char * name_end;
- char name_end_char;
-
- /* Skip the directive. */
- s += strlen (DIRECTIVE_EXPORT);
- name = s;
- /* Find the end of the name to be exported. */
- SKIP_UNTIL (s, e, '\n', "EXPORT: no newline at end of directive");
- /* Skip (backwards) over spaces at end of exported name. */
- for (name_end = s; name_end[-1] == ' '; name_end --)
- ;
- /* name_end now points at the first character after the
- end of the exported name, so we can termiante it */
- name_end_char = * name_end;
- * name_end = 0;
- /* Skip passed the newline character. */
- s ++;
-
- result = sh_symbian_export (abfd, name);
-
- /* The next character should be a NUL. */
- if (* s != 0)
- {
- if (SYMBIAN_DEBUG)
- fprintf (stderr, "EXPORT: Junk at end of directive\n");
- result = FALSE;
- }
- s++;
-
- /* Restore the character we deleted. */
- * name_end = name_end_char;
- }
- break;
-
- default:
- result = FALSE;
- break;
- }
-
- if (! result)
- {
- if (SYMBIAN_DEBUG)
- fprintf (stderr, "offset into .directive section: %ld\n",
- (long) (directive - (char *) contents));
-
- bfd_set_error (bfd_error_invalid_operation);
- /* xgettext:c-format */
- _bfd_error_handler (_("%pB: unrecognized .directive command: %s"),
- abfd, directive);
- break;
- }
- }
-
- return result;
-}
-
-
-/* Scan a bfd for a .directive section, and if found process it.
- Returns TRUE upon success, FALSE otherwise. */
-
-static bfd_boolean
-sh_symbian_process_directives (bfd *abfd, struct bfd_link_info *info)
-{
- bfd_boolean result = FALSE;
- bfd_byte * contents;
- asection * sec = bfd_get_section_by_name (abfd, ".directive");
- bfd_size_type sz;
-
- if (!sec)
- return TRUE;
-
- sz = sec->rawsize ? sec->rawsize : sec->size;
- contents = bfd_malloc (sz);
-
- if (!contents)
- bfd_set_error (bfd_error_no_memory);
- else
- {
- if (bfd_get_section_contents (abfd, sec, contents, 0, sz))
- result = sh_symbian_process_embedded_commands (info, abfd, sec, contents);
- free (contents);
- }
-
- return result;
-}
-
-/* Intercept the normal sh_relocate_section() function
- and magle the relocs to allow for symbol renaming. */
-
-static bfd_boolean
-sh_symbian_relocate_section (bfd * output_bfd,
- struct bfd_link_info * info,
- bfd * input_bfd,
- asection * input_section,
- bfd_byte * contents,
- Elf_Internal_Rela * relocs,
- Elf_Internal_Sym * local_syms,
- asection ** local_sections)
-{
- /* When performing a final link we implement the IMPORT AS directives. */
- if (!bfd_link_relocatable (info))
- {
- Elf_Internal_Rela * rel;
- Elf_Internal_Rela * relend;
- Elf_Internal_Shdr * symtab_hdr;
- struct elf_link_hash_entry ** sym_hashes;
- struct elf_link_hash_entry ** sym_hashes_end;
- struct elf_link_hash_table * hash_table;
- symbol_rename * ptr;
- bfd_size_type num_global_syms;
- unsigned long num_local_syms;
-
- BFD_ASSERT (! elf_bad_symtab (input_bfd));
-
- symtab_hdr = & elf_tdata (input_bfd)->symtab_hdr;
- hash_table = elf_hash_table (info);
- num_local_syms = symtab_hdr->sh_info;
- num_global_syms = symtab_hdr->sh_size / sizeof (Elf32_External_Sym);
- num_global_syms -= num_local_syms;
- sym_hashes = elf_sym_hashes (input_bfd);
- sym_hashes_end = sym_hashes + num_global_syms;
-
- /* First scan the rename table, caching the hash entry and the new index. */
- for (ptr = rename_list; ptr; ptr = ptr->next)
- {
- struct elf_link_hash_entry * new_hash;
- struct elf_link_hash_entry ** h;
-
- ptr->current_hash = elf_link_hash_lookup (hash_table, ptr->current_name, FALSE, FALSE, TRUE);
-
- if (ptr->current_hash == NULL)
- {
- if (SYMBIAN_DEBUG)
- fprintf (stderr, "IMPORT AS: current symbol '%s' does not exist\n", ptr->current_name);
- continue;
- }
-
- new_hash = elf_link_hash_lookup (hash_table, ptr->new_name,
- FALSE, FALSE, TRUE);
- /* If we could not find the symbol then it is a new, undefined symbol.
- Symbian want this behaviour - ie they want to be able to rename the
- reference in a reloc from one undefined symbol to another, new and
- undefined symbol. So we create that symbol here. */
- if (new_hash == NULL)
- {
- struct bfd_link_hash_entry *bh = NULL;
- bfd_boolean collect = get_elf_backend_data (input_bfd)->collect;
- if (_bfd_generic_link_add_one_symbol (info, input_bfd,
- ptr->new_name, BSF_GLOBAL,
- bfd_und_section_ptr, 0,
- NULL, FALSE, collect,
- &bh))
- {
- new_hash = (struct elf_link_hash_entry *) bh;
- new_hash->type = STT_FUNC;
- new_hash->non_elf = 0;
-
- if (SYMBIAN_DEBUG)
- fprintf (stderr, "Created new symbol %s\n", ptr->new_name);
- }
- }
-
- if (new_hash == NULL)
- {
- /* xgettext:c-format */
- _bfd_error_handler (_("%pB: failed to add renamed symbol %s"),
- input_bfd, ptr->new_name);
- continue;
- }
-
- /* Convert the new_hash value into a index into the table of symbol hashes. */
- for (h = sym_hashes; h < sym_hashes_end; h ++)
- {
- if (* h == new_hash)
- {
- ptr->new_symndx = h - sym_hashes + num_local_syms;
- if (SYMBIAN_DEBUG)
- fprintf (stderr, "Converted new hash to index of %ld\n", ptr->new_symndx);
- break;
- }
- }
- /* If the new symbol is not in the hash table then it must be
- because it is one of the newly created undefined symbols
- manufactured above. So we extend the sym has table here to
- include this extra symbol. */
- if (h == sym_hashes_end)
- {
- struct elf_link_hash_entry ** new_sym_hashes;
-
- /* This is not very efficient, but it works. */
- ++ num_global_syms;
- new_sym_hashes = bfd_alloc (input_bfd, num_global_syms * sizeof * sym_hashes);
- if (new_sym_hashes == NULL)
- {
- if (SYMBIAN_DEBUG)
- fprintf (stderr, "Out of memory extending hash table\n");
- continue;
- }
- memcpy (new_sym_hashes, sym_hashes, (num_global_syms - 1) * sizeof * sym_hashes);
- new_sym_hashes[num_global_syms - 1] = new_hash;
- elf_sym_hashes (input_bfd) = sym_hashes = new_sym_hashes;
- sym_hashes_end = sym_hashes + num_global_syms;
- symtab_hdr->sh_size = (num_global_syms + num_local_syms) * sizeof (Elf32_External_Sym);
-
- ptr->new_symndx = num_global_syms - 1 + num_local_syms;
-
- if (SYMBIAN_DEBUG)
- fprintf (stderr, "Extended symbol hash table to insert new symbol as index %ld\n",
- ptr->new_symndx);
- }
- }
-
- /* Walk the reloc list looking for references to renamed symbols.
- When we find one, we alter the index in the reloc to point to the new symbol. */
- for (rel = relocs, relend = relocs + input_section->reloc_count;
- rel < relend;
- rel ++)
- {
- int r_type;
- unsigned long r_symndx;
- struct elf_link_hash_entry * h;
-
- r_symndx = ELF32_R_SYM (rel->r_info);
- r_type = ELF32_R_TYPE (rel->r_info);
-
- /* Ignore unused relocs. */
- if ((r_type >= (int) R_SH_GNU_VTINHERIT
- && r_type <= (int) R_SH_LABEL)
- || r_type == (int) R_SH_NONE
- || r_type < 0
- || r_type >= R_SH_max)
- continue;
-
- /* Ignore relocs against local symbols. */
- if (r_symndx < num_local_syms)
- continue;
-
- BFD_ASSERT (r_symndx < (num_global_syms + num_local_syms));
- h = sym_hashes[r_symndx - num_local_syms];
- BFD_ASSERT (h != NULL);
-
- while ( h->root.type == bfd_link_hash_indirect
- || h->root.type == bfd_link_hash_warning)
- h = (struct elf_link_hash_entry *) h->root.u.i.link;
-
- /* If the symbol is defined there is no need to rename it.
- XXX - is this true ? */
- if ( h->root.type == bfd_link_hash_defined
- || h->root.type == bfd_link_hash_defweak
- || h->root.type == bfd_link_hash_undefweak)
- continue;
-
- for (ptr = rename_list; ptr; ptr = ptr->next)
- if (h == ptr->current_hash)
- {
- BFD_ASSERT (ptr->new_symndx);
- if (SYMBIAN_DEBUG)
- fprintf (stderr, "convert reloc %lx from using index %ld to using index %ld\n",
- (unsigned long) rel->r_info,
- (long) ELF32_R_SYM (rel->r_info), ptr->new_symndx);
- rel->r_info = ELF32_R_INFO (ptr->new_symndx, r_type);
- break;
- }
- }
- }
-
- return sh_elf_relocate_section (output_bfd, info, input_bfd, input_section,
- contents, relocs, local_syms, local_sections);
-}
-
-#define TARGET_LITTLE_SYM sh_elf32_symbian_le_vec
-#define TARGET_LITTLE_NAME "elf32-shl-symbian"
-
-#undef elf_backend_relocate_section
-#define elf_backend_relocate_section sh_symbian_relocate_section
-#undef elf_backend_check_directives
-#define elf_backend_check_directives sh_symbian_process_directives
-
-#include "elf32-target.h"
elf32-s390.c
elf32-score.c
elf32-score7.c
-elf32-sh-symbian.c
elf32-sh.c
elf32-sh64-com.c
elf32-sh64.c
extern const bfd_target sh_elf32_linux_be_vec;
extern const bfd_target sh_elf32_nbsd_vec;
extern const bfd_target sh_elf32_nbsd_le_vec;
-extern const bfd_target sh_elf32_symbian_le_vec;
extern const bfd_target sh_elf32_vxworks_vec;
extern const bfd_target sh_elf32_vxworks_le_vec;
extern const bfd_target sh_pe_le_vec;
&sh_elf32_linux_be_vec,
&sh_elf32_nbsd_vec,
&sh_elf32_nbsd_le_vec,
- &sh_elf32_symbian_le_vec,
&sh_elf32_vxworks_vec,
&sh_elf32_vxworks_le_vec,
&sh_pe_le_vec,
2018-04-16 Alan Modra <amodra@gmail.com>
+ * config/tc-sh.c: Remove sh-symbianelf support.
+ * config/tc-sh.h: Likewise.
+ * configure.ac: Likewise.
+ * configure.tgt: Likewise.
+ * testsuite/gas/sh/reg-prefix.d: Likewise.
+ * testsuite/gas/sh/sh2a-pic.d: Likewise.
+ * config.in: Regenerate.
+ * configure: Regenerate.
+
+2018-04-16 Alan Modra <amodra@gmail.com>
+
* configure.ac: Remove m88k support.
* config.in: Regenerate.
* configure: Regenerate.
/* Define if default target is PowerPC Solaris. */
#undef TARGET_SOLARIS_COMMENT
-/* Define if target is Symbian OS. */
-#undef TARGET_SYMBIAN
-
/* Target vendor. */
#undef TARGET_VENDOR
if (sh64_isa_mode != sh64_isa_unspecified)
val = EF_SH5;
else
-#elif defined TARGET_SYMBIAN
- if (1)
- {
- extern int sh_symbian_find_elf_flags (unsigned int);
-
- val = sh_symbian_find_elf_flags (valid_arch);
- }
- else
#endif /* HAVE_SH64 */
val = sh_find_elf_flags (valid_arch);
#define TARGET_FORMAT (!target_big_endian ? "elf32-sh-linux" : "elf32-shbig-linux")
#elif defined(TE_NetBSD)
#define TARGET_FORMAT (!target_big_endian ? "elf32-shl-nbsd" : "elf32-sh-nbsd")
-#elif defined TARGET_SYMBIAN
-#define TARGET_FORMAT (!target_big_endian ? "elf32-shl-symbian" : "elf32-sh-symbian")
#elif defined (TE_VXWORKS)
#define TARGET_FORMAT (!target_big_endian ? "elf32-shl-vxworks" : "elf32-sh-vxworks")
#elif defined (TE_UCLINUX)
as_fn_error "Solaris must be configured little endian" "$LINENO" 5
fi
;;
-
- sh*-*-symbianelf*)
-
-$as_echo "#define TARGET_SYMBIAN 1" >>confdefs.h
-
- ;;
esac
if test ${this_target} = $target ; then
AC_MSG_ERROR(Solaris must be configured little endian)
fi
;;
-
- sh*-*-symbianelf*)
- AC_DEFINE(TARGET_SYMBIAN, 1, [Define if target is Symbian OS.])
- ;;
esac
if test ${this_target} = $target ; then
sh*l*) endian=little ;;
*) endian=big ;;
esac ;;
- sh*-*-symbianelf*) fmt=elf endian=little ;;
sh-*-elf*) fmt=elf ;;
sh-*-uclinux* | sh[12]-*-uclinux*) fmt=elf em=uclinux ;;
sh-*-coff*) fmt=coff ;;
#objdump: -dr --prefix-addresses --show-raw-insn
#as: --allow-reg-prefix -big
#name: SH --allow-reg-prefix option
-#skip: sh*-*-symbian*
# Test SH register names prefixed with $:
.*: file format elf.*sh.*
#objdump: -dr --prefix-addresses --show-raw-insn
#name: SH2a PIC relocations
#as: -isa=sh2a
-#skip: sh*-*-symbian*
dump.o: file format elf32-sh.*
2018-04-16 Alan Modra <amodra@gmail.com>
+ * Makefile.am: Remove sh-symbianelf support.
+ * configure.tgt: Likewise.
+ * emulparams/shlsymbian.sh: Delete.
+ * scripttempl/elf32sh-symbian.sc: Delete.
+ * Makefile.in: Regenerate.
+ * po/BLD-POTFILES.in: Regenerate.
+
+2018-04-16 Alan Modra <amodra@gmail.com>
+
* Makefile.am: Remove vax-bsd and vax-ultrix support.
* configure.tgt: Likewise.
* emulparams/vax.sh: Delete.
eshlelf_nbsd.c \
eshlelf_nto.c \
eshlelf_vxworks.c \
- eshlsymbian.c \
eshpe.c \
esparcaout.c \
esparclinux.c \
$(ELF_DEPS) $(srcdir)/scripttempl/elf.sc $(srcdir)/emultempl/vxworks.em \
${GEN_DEPENDS}
-eshlsymbian.c: $(srcdir)/emulparams/shlsymbian.sh \
- $(srcdir)/emulparams/shelf.sh \
- $(ELF_DEPS) $(srcdir)/scripttempl/elf32sh-symbian.sc ${GEN_DEPENDS}
-
eshpe.c: $(srcdir)/emulparams/shpe.sh \
$(srcdir)/emultempl/pe.em $(srcdir)/scripttempl/pe.sc ${GEN_DEPENDS}
eshlelf_nbsd.c \
eshlelf_nto.c \
eshlelf_vxworks.c \
- eshlsymbian.c \
eshpe.c \
esparcaout.c \
esparclinux.c \
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eshlelf_nbsd.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eshlelf_nto.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eshlelf_vxworks.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eshlsymbian.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eshpe.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/esparcaout.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/esparclinux.Po@am__quote@
$(ELF_DEPS) $(srcdir)/scripttempl/elf.sc $(srcdir)/emultempl/vxworks.em \
${GEN_DEPENDS}
-eshlsymbian.c: $(srcdir)/emulparams/shlsymbian.sh \
- $(srcdir)/emulparams/shelf.sh \
- $(ELF_DEPS) $(srcdir)/scripttempl/elf32sh-symbian.sc ${GEN_DEPENDS}
-
eshpe.c: $(srcdir)/emulparams/shpe.sh \
$(srcdir)/emultempl/pe.em $(srcdir)/scripttempl/pe.sc ${GEN_DEPENDS}
targ_extra_emuls=shelf_nbsd ;;
sh*-*-netbsdelf*) targ_emul=shelf_nbsd
targ_extra_emuls=shlelf_nbsd ;;
-sh*-*-symbianelf*) targ_emul=shlsymbian ;;
shle*-*-elf* | sh[1234]*le*-*-elf | shle*-*-kaos*)
targ_emul=shlelf
targ_extra_emuls="shelf shl sh" ;;
+++ /dev/null
-TEXT_START_ADDR=0x8000
-SHLIB_TEXT_START_ADDR=0x8000
-SHLIB_DATA_ADDR=0x400000
-
-. ${srcdir}/emulparams/shelf.sh
-
-# Use only two underscores for the constructor/destructor symbols
-CTOR_START='__ctors = .;'
-CTOR_END='__ctors_end = .;'
-DTOR_START='__dtors = .;'
-DTOR_END='__dtors_end = .;'
-
-# Suppress the .stack section.
-unset STACK_ADDR
-OTHER_SYMBOLS="PROVIDE (_stack = 0x30000);"
-test -n "$CREATE_SHLIB" && unset OTHER_SYMBOLS
-
-OUTPUT_FORMAT="elf32-shl-symbian"
-SCRIPT_NAME=elf32sh-symbian
eshlelf_nbsd.c
eshlelf_nto.c
eshlelf_vxworks.c
-eshlsymbian.c
eshpe.c
esparcaout.c
esparclinux.c
+++ /dev/null
-# Copyright (C) 2014-2018 Free Software Foundation, Inc.
-#
-# Copying and distribution of this file, with or without modification,
-# are permitted in any medium without royalty provided the copyright
-# notice and this notice are preserved.
-#
-# Unusual variables checked by this code:
-# NOP - four byte opcode for no-op (defaults to 0)
-# DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
-# INITIAL_READONLY_SECTIONS - at start of text segment
-# OTHER_READONLY_SECTIONS - other than .text .init .rodata ...
-# (e.g., .PARISC.milli)
-# OTHER_TEXT_SECTIONS - these get put in .text when relocating
-# OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
-# (e.g., .PARISC.global)
-# ATTRS_SECTIONS - at the end
-# OTHER_SECTIONS - at the end
-# EXECUTABLE_SYMBOLS - symbols that must be defined for an
-# executable (e.g., _DYNAMIC_LINK)
-# TEXT_START_SYMBOLS - symbols that appear at the start of the
-# .text section.
-# DATA_START_SYMBOLS - symbols that appear at the start of the
-# .data section.
-# OTHER_GOT_SYMBOLS - symbols defined just before .got.
-# OTHER_GOT_SECTIONS - sections just after .got.
-# OTHER_SDATA_SECTIONS - sections just after .sdata.
-# OTHER_BSS_SYMBOLS - symbols that appear at the start of the
-# .bss section besides __bss_start.
-# DATA_PLT - .plt should be in data segment, not text segment.
-# BSS_PLT - .plt should be in bss segment
-# TEXT_DYNAMIC - .dynamic in text segment, not data segment.
-# EMBEDDED - whether this is for an embedded system.
-# SHLIB_TEXT_START_ADDR - if set, add to SIZEOF_HEADERS to set
-# start address of shared library.
-# INPUT_FILES - INPUT command of files to always include
-# WRITABLE_RODATA - if set, the .rodata section should be writable
-# INIT_START, INIT_END - statements just before and just after
-# combination of .init sections.
-# FINI_START, FINI_END - statements just before and just after
-# combination of .fini sections.
-# STACK_ADDR - start of a .stack section.
-# OTHER_SYMBOLS - symbols to place right at the end of the script.
-#
-# When adding sections, do note that the names of some sections are used
-# when specifying the start address of the next.
-#
-
-# Many sections come in three flavours. There is the 'real' section,
-# like ".data". Then there are the per-procedure or per-variable
-# sections, generated by -ffunction-sections and -fdata-sections in GCC,
-# and useful for --gc-sections, which for a variable "foo" might be
-# ".data.foo". Then there are the linkonce sections, for which the linker
-# eliminates duplicates, which are named like ".gnu.linkonce.d.foo".
-# The exact correspondences are:
-#
-# Section Linkonce section
-# .text .gnu.linkonce.t.foo
-# .rodata .gnu.linkonce.r.foo
-# .data .gnu.linkonce.d.foo
-# .bss .gnu.linkonce.b.foo
-# .sdata .gnu.linkonce.s.foo
-# .sbss .gnu.linkonce.sb.foo
-# .sdata2 .gnu.linkonce.s2.foo
-# .sbss2 .gnu.linkonce.sb2.foo
-# .debug_info .gnu.linkonce.wi.foo
-# .tdata .gnu.linkonce.td.foo
-# .tbss .gnu.linkonce.tb.foo
-#
-# Each of these can also have corresponding .rel.* and .rela.* sections.
-
-test -z "$ENTRY" && ENTRY=_start
-test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
-test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
-if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
-test -z "${ELFSIZE}" && ELFSIZE=32
-test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8"
-test "$LD_FLAG" = "N" && DATA_ADDR=.
-test -n "$CREATE_SHLIB$CREATE_PIE" && test -n "$SHLIB_DATA_ADDR" && COMMONPAGESIZE=""
-test -z "$CREATE_SHLIB$CREATE_PIE" && test -n "$DATA_ADDR" && COMMONPAGESIZE=""
-test -z "$ATTRS_SECTIONS" && ATTRS_SECTIONS=".gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }"
-DATA_SEGMENT_ALIGN="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
-DATA_SEGMENT_END=""
-if test -n "${COMMONPAGESIZE}"; then
- DATA_SEGMENT_ALIGN="ALIGN (${SEGMENT_SIZE}) - ((${MAXPAGESIZE} - .) & (${MAXPAGESIZE} - 1)); . = DATA_SEGMENT_ALIGN (${MAXPAGESIZE}, ${COMMONPAGESIZE})"
- DATA_SEGMENT_END=". = DATA_SEGMENT_END (.);"
-fi
- INTERP=".interp ALIGN(4) : { *(.interp) }"
- PLT=".plt : { *(.plt) } :dynamic :dyn"
-DYNAMIC=".dynamic : { *(.dynamic) } :dynamic :dyn"
- RODATA=".rodata ALIGN(4) : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }"
-DISCARDED="/DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) *(.directive) *(.gnu.lto_*) }"
-test -z "$GOT" && GOT=".got ${RELOCATING-0} : { *(.got.plt) *(.got) } :dynamic :dyn"
-INIT_ARRAY=".init_array ${RELOCATING-0} :
- {
- ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__init_array_start = .);}}
- KEEP (*(SORT(.init_array.*)))
- KEEP (*(.init_array))
- ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__init_array_end = .);}}
- }"
-FINI_ARRAY=".fini_array ${RELOCATING-0} :
- {
- ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__fini_array_start = .);}}
- KEEP (*(SORT(.fini_array.*)))
- KEEP (*(.fini_array))
- ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__fini_array_end = .);}}
- }"
-CTOR=".ctors ALIGN(4) :
- {
- ${CONSTRUCTING+${CTOR_START}}
- /* gcc uses crtbegin.o to find the start of
- the constructors, so we make sure it is
- first. Because this is a wildcard, it
- doesn't matter if the user does not
- actually link against crtbegin.o; the
- linker won't look for a file to match a
- wildcard. The wildcard also means that it
- doesn't matter which directory crtbegin.o
- is in. */
-
- KEEP (*crtbegin.o(.ctors))
- KEEP (*crtbegin?.o(.ctors))
-
- /* We don't want to include the .ctor section from
- the crtend.o file until after the sorted ctors.
- The .ctor section from the crtend file contains the
- end of ctors marker and it must be last */
-
- KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .ctors))
- KEEP (*(SORT(.ctors.*)))
- KEEP (*(.ctors))
- ${CONSTRUCTING+${CTOR_END}}
- } :text"
-DTOR=".dtors ALIGN(4) :
- {
- ${CONSTRUCTING+${DTOR_START}}
- KEEP (*crtbegin.o(.dtors))
- KEEP (*crtbegin?.o(.dtors))
- KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .dtors))
- KEEP (*(SORT(.dtors.*)))
- KEEP (*(.dtors))
- ${CONSTRUCTING+${DTOR_END}}
- } :text"
-STACK=" .stack ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} :
- {
- ${RELOCATING+_stack = .;}
- *(.stack)
- } :data"
-
-# If this is for an embedded system, don't add SIZEOF_HEADERS.
-if [ -z "$EMBEDDED" ]; then
- test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS"
-else
- test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}"
-fi
-
-cat <<EOF
-/* Copyright (C) 2014-2018 Free Software Foundation, Inc.
-
- Copying and distribution of this script, with or without modification,
- are permitted in any medium without royalty provided the copyright
- notice and this notice are preserved. */
-
-OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
- "${LITTLE_OUTPUT_FORMAT}")
-OUTPUT_ARCH(${OUTPUT_ARCH})
-${RELOCATING+ENTRY(${ENTRY})}
-
-${RELOCATING+${LIB_SEARCH_DIRS}}
-${RELOCATING+/* Do we need any of these for elf?
- __DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}} */}
-${RELOCATING+${EXECUTABLE_SYMBOLS}}
-${RELOCATING+${INPUT_FILES}}
-${RELOCATING- /* For some reason, the Solaris linker makes bad executables
- if gld -r is used and the intermediate file has sections starting
- at non-zero addresses. Could be a Solaris ld bug, could be a GNU ld
- bug. But for now assigning the zero vmas works. */}
-
-PHDRS
-{
- headers PT_PHDR PHDRS ;
- text PT_LOAD ;
- data PT_LOAD ;
- dyn PT_LOAD FLAGS (0) ;
- dynamic PT_DYNAMIC ;
-}
-
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${TEXT_BASE_ADDRESS};}}}
- ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0};}}
- ${CREATE_PIE+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0};}}
- ${CREATE_SHLIB-${INTERP}}
-
- ${INITIAL_READONLY_SECTIONS}
-
- .init ALIGN(4) :
- {
- ${RELOCATING+${INIT_START}}
- KEEP (*(.init))
- ${RELOCATING+${INIT_END}}
- } :text =${NOP-0}
-
- .text ALIGN(4) :
- {
- ${RELOCATING+${TEXT_START_SYMBOLS}}
- *(.text .stub${RELOCATING+ .text.* .gnu.linkonce.t.*})
- /* .gnu.warning sections are handled specially by elf32.em. */
- *(.gnu.warning)
- ${RELOCATING+${OTHER_TEXT_SECTIONS}}
- } =${NOP-0}
-
- ${RELOCATING+${CTOR}}
- ${RELOCATING+${DTOR}}
-
- .fini ALIGN(4) :
- {
- ${RELOCATING+${FINI_START}}
- KEEP (*(.fini))
- ${RELOCATING+${FINI_END}}
- } =${NOP-0}
-
- ${RELOCATING+PROVIDE (__etext = .);}
- ${RELOCATING+PROVIDE (_etext = .);}
- ${RELOCATING+PROVIDE (etext = .);}
-
- ${WRITABLE_RODATA-${RODATA}}
- .rodata1 ALIGN(4) : { *(.rodata1) }
-
- ExportTable ALIGN(4) : { KEEP (*(ExportTable)) }
- .eh_frame_hdr ALIGN(4) : { *(.eh_frame_hdr) } :text
-
- /* Adjust the address for the data segment. We want to adjust up to
- the same address within the page on the next page up. */
- . = ALIGN(128) + (. & (128 - 1));
- .preinit_array ${RELOCATING-0} :
- {
- ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__preinit_array_start = .);}}
- KEEP (*(.preinit_array))
- ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__preinit_array_end = .);}}
- }
- ${RELOCATING+${INIT_ARRAY}}
- ${RELOCATING+${FINI_ARRAY}}
-
- ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}}
- ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
- ${CREATE_PIE+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
-
- .data ALIGN(4) :
- {
- ${RELOCATING+${DATA_START_SYMBOLS}}
- *(.data${RELOCATING+ .data.* .gnu.linkonce.d.*})
- ${CONSTRUCTING+SORT(CONSTRUCTORS)}
- } :data
-
- .data1 ALIGN(4) : { *(.data1) } :data
- .tdata ALIGN(4) : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) } :data
- .tbss ALIGN(4) : { *(.tbss${RELOCATING+ .tbss.* .gnu.linkonce.tb.*})${RELOCATING+ *(.tcommon)} } :data
- .eh_frame ALIGN(4) : { KEEP (*(.eh_frame)) } :data
- .gcc_except_table ALIGN(4) : { *(.gcc_except_table) } :data
- ${WRITABLE_RODATA+${RODATA}}
- ${OTHER_READWRITE_SECTIONS}
- ${SDATA}
- ${OTHER_SDATA_SECTIONS}
- ${RELOCATING+_edata = .;}
- ${RELOCATING+PROVIDE (edata = .);}
- ${RELOCATING+__bss_start = .;}
- ${RELOCATING+${OTHER_BSS_SYMBOLS}}
- ${BSS_PLT+${PLT}}
- .bss ALIGN(4) :
- {
- *(.dynbss)
- *(.bss${RELOCATING+ .bss.* .gnu.linkonce.b.*})
- *(COMMON)
- /* Align here to ensure that the .bss section occupies space up to
- _end. Align after .bss to ensure correct alignment even if the
- .bss section disappears because there are no input sections. */
- ${RELOCATING+. = ALIGN(${ALIGNMENT});}
- } :data
- ${RELOCATING+${OTHER_BSS_END_SYMBOLS}}
- ${RELOCATING+. = ALIGN(${ALIGNMENT});}
- ${RELOCATING+${OTHER_END_SYMBOLS}}
- ${RELOCATING+_end = .;}
- ${RELOCATING+PROVIDE (end = .);}
- ${RELOCATING+${DATA_SEGMENT_END}}
-
- ${TEXT_DYNAMIC-${DYNAMIC}}
- ${TEXT_DYNAMIC+${DYNAMIC}}
- .hash ${RELOCATING-0} : { *(.hash) } :dynamic :dyn
- .dynsym ${RELOCATING-0} : { *(.dynsym) } :dynamic :dyn
- .dynstr ${RELOCATING-0} : { *(.dynstr) } :dynamic :dyn
- ${DATA_PLT-${BSS_PLT-${PLT}}}
- .got.plt : { *(.got.plt) } :dynamic :dyn
- .gnu.version ${RELOCATING-0} : { *(.gnu.version) }
- .gnu.version_d ${RELOCATING-0}: { *(.gnu.version_d) }
- .gnu.version_r ${RELOCATING-0}: { *(.gnu.version_r) }
-EOF
-if [ "x$COMBRELOC" = x ]; then
- COMBRELOCCAT=cat
-else
- COMBRELOCCAT="cat > $COMBRELOC"
-fi
-eval $COMBRELOCCAT <<EOF
- .rel.init ${RELOCATING-0} : { *(.rel.init) }
- .rela.init ${RELOCATING-0} : { *(.rela.init) }
- .rel.text ${RELOCATING-0} : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) }
- .rela.text ${RELOCATING-0} : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) }
- .rel.fini ${RELOCATING-0} : { *(.rel.fini) }
- .rela.fini ${RELOCATING-0} : { *(.rela.fini) }
- .rel.rodata ${RELOCATING-0} : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) }
- .rela.rodata ${RELOCATING-0} : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) }
- ${OTHER_READONLY_RELOC_SECTIONS}
- .rel.data ${RELOCATING-0} : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) }
- .rela.data ${RELOCATING-0} : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) }
- .rel.tdata ${RELOCATING-0} : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) }
- .rela.tdata ${RELOCATING-0} : { *(.rela.tdata${RELOCATING+ .rela.tdata.* .rela.gnu.linkonce.td.*}) }
- .rel.tbss ${RELOCATING-0} : { *(.rel.tbss${RELOCATING+ .rel.tbss.* .rel.gnu.linkonce.tb.*}) }
- .rela.tbss ${RELOCATING-0} : { *(.rela.tbss${RELOCATING+ .rela.tbss.* .rela.gnu.linkonce.tb.*}) }
- .rel.ctors ${RELOCATING-0} : { *(.rel.ctors) }
- .rela.ctors ${RELOCATING-0} : { *(.rela.ctors) }
- .rel.dtors ${RELOCATING-0} : { *(.rel.dtors) }
- .rela.dtors ${RELOCATING-0} : { *(.rela.dtors) }
- .rel.got ${RELOCATING-0} : { *(.rel.got) }
- .rela.got ${RELOCATING-0} : { *(.rela.got) }
- ${OTHER_GOT_RELOC_SECTIONS}
- .rel.bss ${RELOCATING-0} : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) }
- .rela.bss ${RELOCATING-0} : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) }
-EOF
-if [ -n "$COMBRELOC" ]; then
-cat <<EOF
- .rel.dyn ${RELOCATING-0} :
- {
-EOF
-sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/ \1/' $COMBRELOC
-cat <<EOF
- }
- .rela.dyn ${RELOCATING-0} :
- {
-EOF
-sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/ \1/' $COMBRELOC
-cat <<EOF
- }
-EOF
-fi
-cat <<EOF
- .rel.plt ${RELOCATING-0} : { *(.rel.plt) }
- .rela.plt ${RELOCATING-0} : { *(.rela.plt) }
- ${OTHER_PLT_RELOC_SECTIONS}
-
-
- /* Stabs debugging sections. */
- .stab 0 : { *(.stab) }
- .stabstr 0 : { *(.stabstr) }
- .stab.excl 0 : { *(.stab.excl) }
- .stab.exclstr 0 : { *(.stab.exclstr) }
- .stab.index 0 : { *(.stab.index) }
- .stab.indexstr 0 : { *(.stab.indexstr) }
-
- .comment 0 : { *(.comment) }
-
-EOF
-
-. $srcdir/scripttempl/DWARF.sc
-
-cat <<EOF
- ${STACK_ADDR+${STACK}}
- ${ATTRS_SECTIONS}
- ${OTHER_SECTIONS}
- ${RELOCATING+${OTHER_SYMBOLS}}
- ${RELOCATING+${DISCARDED}}
-}
-EOF
projects / external / binutils.git / commitdiff