#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/bitops.h>
}
#endif
+/**
+ * omap2_clk_switch_mpurate_at_boot - switch ARM MPU rate by boot-time argument
+ * @mpurate_ck_name: clk name of the clock to change rate
+ *
+ * Change the ARM MPU clock rate to the rate specified on the command
+ * line, if one was specified. @mpurate_ck_name should be
+ * "virt_prcm_set" on OMAP2xxx and "dpll1_ck" on OMAP34xx/OMAP36xx.
+ * XXX Does not handle voltage scaling - on OMAP2xxx this is currently
+ * handled by the virt_prcm_set clock, but this should be handled by
+ * the OPP layer. XXX This is intended to be handled by the OPP layer
+ * code in the near future and should be removed from the clock code.
+ * Returns -EINVAL if 'mpurate' is zero or if clk_set_rate() rejects
+ * the rate, -ENOENT if the struct clk referred to by @mpurate_ck_name
+ * cannot be found, or 0 upon success.
+ */
+int __init omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name)
+{
+ struct clk *mpurate_ck;
+ int r;
+
+ if (!mpurate)
+ return -EINVAL;
+
+ mpurate_ck = clk_get(NULL, mpurate_ck_name);
+ if (WARN(IS_ERR(mpurate_ck), "Failed to get %s.\n", mpurate_ck_name))
+ return -ENOENT;
+
+ r = clk_set_rate(mpurate_ck, mpurate);
+ if (IS_ERR_VALUE(r)) {
+ WARN(1, "clock: %s: unable to set MPU rate to %d: %d\n",
+ mpurate_ck->name, mpurate, r);
+ return -EINVAL;
+ }
+
+ calibrate_delay();
+ recalculate_root_clocks();
+
+ clk_put(mpurate_ck);
+
+ return 0;
+}
+
+/**
+ * omap2_clk_print_new_rates - print summary of current clock tree rates
+ * @hfclkin_ck_name: clk name for the off-chip HF oscillator
+ * @core_ck_name: clk name for the on-chip CORE_CLK
+ * @mpu_ck_name: clk name for the ARM MPU clock
+ *
+ * Prints a short message to the console with the HFCLKIN oscillator
+ * rate, the rate of the CORE clock, and the rate of the ARM MPU clock.
+ * Called by the boot-time MPU rate switching code. XXX This is intended
+ * to be handled by the OPP layer code in the near future and should be
+ * removed from the clock code. No return value.
+ */
+void __init omap2_clk_print_new_rates(const char *hfclkin_ck_name,
+ const char *core_ck_name,
+ const char *mpu_ck_name)
+{
+ struct clk *hfclkin_ck, *core_ck, *mpu_ck;
+ unsigned long hfclkin_rate;
+
+ mpu_ck = clk_get(NULL, mpu_ck_name);
+ if (WARN(IS_ERR(mpu_ck), "clock: failed to get %s.\n", mpu_ck_name))
+ return;
+
+ core_ck = clk_get(NULL, core_ck_name);
+ if (WARN(IS_ERR(core_ck), "clock: failed to get %s.\n", core_ck_name))
+ return;
+
+ hfclkin_ck = clk_get(NULL, hfclkin_ck_name);
+ if (WARN(IS_ERR(hfclkin_ck), "Failed to get %s.\n", hfclkin_ck_name))
+ return;
+
+ hfclkin_rate = clk_get_rate(hfclkin_ck);
+
+ pr_info("Switched to new clocking rate (Crystal/Core/MPU): "
+ "%ld.%01ld/%ld/%ld MHz\n",
+ (hfclkin_rate / 1000000),
+ ((hfclkin_rate / 100000) % 10),
+ (clk_get_rate(core_ck) / 1000000),
+ (clk_get_rate(mpu_ck) / 1000000));
+}
+
/* Common data */
struct clk_functions omap2_clk_functions = {
u8 *other_bit);
void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg,
u8 *idlest_bit, u8 *idlest_val);
+int omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name);
+void omap2_clk_print_new_rates(const char *hfclkin_ck_name,
+ const char *core_ck_name,
+ const char *mpu_ck_name);
extern u8 cpu_mask;
}
/*
- * Switch the MPU rate if specified on cmdline.
- * We cannot do this early until cmdline is parsed.
+ * Switch the MPU rate if specified on cmdline. We cannot do this
+ * early until cmdline is parsed. XXX This should be removed from the
+ * clock code and handled by the OPP layer code in the near future.
*/
static int __init omap2xxx_clk_arch_init(void)
{
- struct clk *virt_prcm_set, *sys_ck, *dpll_ck, *mpu_ck;
- unsigned long sys_ck_rate;
+ int ret;
if (!cpu_is_omap24xx())
return 0;
- if (!mpurate)
- return -EINVAL;
+ ret = omap2_clk_switch_mpurate_at_boot("virt_prcm_set");
+ if (!ret)
+ omap2_clk_print_new_rates("sys_ck", "dpll_ck", "mpu_ck");
- virt_prcm_set = clk_get(NULL, "virt_prcm_set");
- sys_ck = clk_get(NULL, "sys_ck");
- dpll_ck = clk_get(NULL, "dpll_ck");
- mpu_ck = clk_get(NULL, "mpu_ck");
-
- if (clk_set_rate(virt_prcm_set, mpurate))
- pr_err("Could not find matching MPU rate\n");
-
- recalculate_root_clocks();
-
- sys_ck_rate = clk_get_rate(sys_ck);
-
- pr_info("Switched to new clocking rate (Crystal/DPLL/MPU): "
- "%ld.%01ld/%ld/%ld MHz\n",
- (sys_ck_rate / 1000000), (sys_ck_rate / 100000) % 10,
- (clk_get_rate(dpll_ck) / 1000000),
- (clk_get_rate(mpu_ck) / 1000000));
-
- return 0;
+ return ret;
}
+
arch_initcall(omap2xxx_clk_arch_init);
#include <linux/kernel.h>
#include <linux/errno.h>
-#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/io.h>
-#include <linux/err.h>
-#include <plat/cpu.h>
#include <plat/clock.h>
#include "clock.h"
/* Common clock code */
-/* REVISIT: Move this init stuff out into clock.c */
-
/*
- * Switch the MPU rate if specified on cmdline.
- * We cannot do this early until cmdline is parsed.
+ * Switch the MPU rate if specified on cmdline. We cannot do this
+ * early until cmdline is parsed. XXX This should be removed from the
+ * clock code and handled by the OPP layer code in the near future.
*/
static int __init omap3xxx_clk_arch_init(void)
{
- struct clk *osc_sys_ck, *dpll1_ck, *arm_fck, *core_ck;
- unsigned long osc_sys_rate;
- bool err = 0;
+ int ret;
if (!cpu_is_omap34xx())
return 0;
- if (!mpurate)
- return -EINVAL;
-
- /* XXX test these for success */
- dpll1_ck = clk_get(NULL, "dpll1_ck");
- if (WARN(IS_ERR(dpll1_ck), "Failed to get dpll1_ck.\n"))
- err = 1;
-
- arm_fck = clk_get(NULL, "arm_fck");
- if (WARN(IS_ERR(arm_fck), "Failed to get arm_fck.\n"))
- err = 1;
-
- core_ck = clk_get(NULL, "core_ck");
- if (WARN(IS_ERR(core_ck), "Failed to get core_ck.\n"))
- err = 1;
-
- osc_sys_ck = clk_get(NULL, "osc_sys_ck");
- if (WARN(IS_ERR(osc_sys_ck), "Failed to get osc_sys_ck.\n"))
- err = 1;
-
- if (err)
- return -ENOENT;
+ ret = omap2_clk_switch_mpurate_at_boot("dpll1_ck");
+ if (!ret)
+ omap2_clk_print_new_rates("osc_sys_ck", "arm_fck", "core_ck");
- /* REVISIT: not yet ready for 343x */
- if (clk_set_rate(dpll1_ck, mpurate))
- printk(KERN_ERR "*** Unable to set MPU rate\n");
-
- recalculate_root_clocks();
-
- osc_sys_rate = clk_get_rate(osc_sys_ck);
-
- pr_info("Switched to new clocking rate (Crystal/Core/MPU): "
- "%ld.%01ld/%ld/%ld MHz\n",
- (osc_sys_rate / 1000000),
- ((osc_sys_rate / 100000) % 10),
- (clk_get_rate(core_ck) / 1000000),
- (clk_get_rate(arm_fck) / 1000000));
-
- calibrate_delay();
-
- return 0;
+ return ret;
}
+
arch_initcall(omap3xxx_clk_arch_init);