usb: phy: nop: Defer clock prepare until PHY init

Since we only enable the PHY clock on init and the PHY init and shutdown
does not occur in atomitc context there is no need to prepare the clock
before it is enabled.  Move the clk_prepare() operations to go along
with the enables, allowing the clock to be fully idle when not in use.

Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>

diff --git a/drivers/usb/phy/phy-am335x.c b/drivers/usb/phy/phy-am335x.c
index c4d614d..f836dc6 100644 (file)
--- a/drivers/usb/phy/phy-am335x.c
+++ b/drivers/usb/phy/phy-am335x.c
@@ -59,15 +59,14 @@ static int am335x_phy_probe(struct platform_device *pdev)
 
        ret = usb_add_phy_dev(&am_phy->usb_phy_gen.phy);
        if (ret)
-               goto err_add;
+               return ret;
        am_phy->usb_phy_gen.phy.init = am335x_init;
        am_phy->usb_phy_gen.phy.shutdown = am335x_shutdown;
 
        platform_set_drvdata(pdev, am_phy);
+
        return 0;
 
-err_add:
-       usb_phy_gen_cleanup_phy(&am_phy->usb_phy_gen);
        return ret;
 }
 

diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c
index efe59f3..fcc3104 100644 (file)
--- a/drivers/usb/phy/phy-generic.c
+++ b/drivers/usb/phy/phy-generic.c
@@ -74,7 +74,7 @@ int usb_gen_phy_init(struct usb_phy *phy)
        }
 
        if (!IS_ERR(nop->clk))
-               clk_enable(nop->clk);
+               clk_prepare_enable(nop->clk);
 
        if (!IS_ERR(nop->reset)) {
                /* De-assert RESET */
@@ -97,7 +97,7 @@ void usb_gen_phy_shutdown(struct usb_phy *phy)
        }
 
        if (!IS_ERR(nop->clk))
-               clk_disable(nop->clk);
+               clk_disable_unprepare(nop->clk);
 
        if (!IS_ERR(nop->vcc)) {
                if (regulator_disable(nop->vcc))
@@ -160,14 +160,6 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop,
                }
        }
 
-       if (!IS_ERR(nop->clk)) {
-               err = clk_prepare(nop->clk);
-               if (err) {
-                       dev_err(dev, "Error preparing clock\n");
-                       return err;
-               }
-       }
-
        nop->vcc = devm_regulator_get(dev, "vcc");
        if (IS_ERR(nop->vcc)) {
                dev_dbg(dev, "Error getting vcc regulator: %ld\n",
@@ -200,13 +192,6 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop,
 }
 EXPORT_SYMBOL_GPL(usb_phy_gen_create_phy);
 
-void usb_phy_gen_cleanup_phy(struct usb_phy_gen_xceiv *nop)
-{
-       if (!IS_ERR(nop->clk))
-               clk_unprepare(nop->clk);
-}
-EXPORT_SYMBOL_GPL(usb_phy_gen_cleanup_phy);
-
 static int usb_phy_gen_xceiv_probe(struct platform_device *pdev)
 {
        struct device *dev = &pdev->dev;
@@ -252,15 +237,13 @@ static int usb_phy_gen_xceiv_probe(struct platform_device *pdev)
        if (err) {
                dev_err(&pdev->dev, "can't register transceiver, err: %d\n",
                        err);
-               goto err_add;
+               return err;
        }
 
        platform_set_drvdata(pdev, nop);
 
        return 0;
 
-err_add:
-       usb_phy_gen_cleanup_phy(nop);
        return err;
 }
 
@@ -268,7 +251,6 @@ static int usb_phy_gen_xceiv_remove(struct platform_device *pdev)
 {
        struct usb_phy_gen_xceiv *nop = platform_get_drvdata(pdev);
 
-       usb_phy_gen_cleanup_phy(nop);
        usb_remove_phy(&nop->phy);
 
        return 0;

diff --git a/drivers/usb/phy/phy-generic.h b/drivers/usb/phy/phy-generic.h
index 61687d5..386d11b 100644 (file)
--- a/drivers/usb/phy/phy-generic.h
+++ b/drivers/usb/phy/phy-generic.h
@@ -15,6 +15,5 @@ void usb_gen_phy_shutdown(struct usb_phy *phy);
 int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop,
                enum usb_phy_type type, u32 clk_rate, bool needs_vcc,
                bool needs_reset);
-void usb_phy_gen_cleanup_phy(struct usb_phy_gen_xceiv *nop);
 
 #endif