dt-bindings: mtd: Document the STM32 QSPI bindings
authorLudovic Barre <ludovic.barre@st.com>
Thu, 13 Apr 2017 17:15:56 +0000 (19:15 +0200)
committerBrian Norris <computersforpeace@gmail.com>
Tue, 2 May 2017 01:08:03 +0000 (18:08 -0700)
This patch adds documentation of device tree bindings for the STM32
QSPI controller.

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Documentation/devicetree/bindings/mtd/stm32-quadspi.txt [new file with mode: 0644]

diff --git a/Documentation/devicetree/bindings/mtd/stm32-quadspi.txt b/Documentation/devicetree/bindings/mtd/stm32-quadspi.txt
new file mode 100644 (file)
index 0000000..ddd18c1
--- /dev/null
@@ -0,0 +1,43 @@
+* STMicroelectronics Quad Serial Peripheral Interface(QuadSPI)
+
+Required properties:
+- compatible: should be "st,stm32f469-qspi"
+- reg: the first contains the register location and length.
+       the second contains the memory mapping address and length
+- reg-names: should contain the reg names "qspi" "qspi_mm"
+- interrupts: should contain the interrupt for the device
+- clocks: the phandle of the clock needed by the QSPI controller
+- A pinctrl must be defined to set pins in mode of operation for QSPI transfer
+
+Optional properties:
+- resets: must contain the phandle to the reset controller.
+
+A spi flash must be a child of the nor_flash node and could have some
+properties. Also see jedec,spi-nor.txt.
+
+Required properties:
+- reg: chip-Select number (QSPI controller may connect 2 nor flashes)
+- spi-max-frequency: max frequency of spi bus
+
+Optional property:
+- spi-rx-bus-width: see ../spi/spi-bus.txt for the description
+
+Example:
+
+qspi: spi@a0001000 {
+       compatible = "st,stm32f469-qspi";
+       reg = <0xa0001000 0x1000>, <0x90000000 0x10000000>;
+       reg-names = "qspi", "qspi_mm";
+       interrupts = <91>;
+       resets = <&rcc STM32F4_AHB3_RESET(QSPI)>;
+       clocks = <&rcc 0 STM32F4_AHB3_CLOCK(QSPI)>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_qspi0>;
+
+       flash@0 {
+               reg = <0>;
+               spi-rx-bus-width = <4>;
+               spi-max-frequency = <108000000>;
+               ...
+       };
+};