powerpc/pmac/smp: Consolidate 32-bit and 64-bit PowerMac cpu_die in one file
authorBenjamin Herrenschmidt <benh@kernel.crashing.org>
Fri, 11 Feb 2011 03:03:20 +0000 (14:03 +1100)
committerBenjamin Herrenschmidt <benh@kernel.crashing.org>
Fri, 1 Apr 2011 04:37:21 +0000 (15:37 +1100)
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
arch/powerpc/platforms/powermac/pmac.h
arch/powerpc/platforms/powermac/setup.c
arch/powerpc/platforms/powermac/smp.c

index f0bc08f..20468f4 100644 (file)
@@ -33,7 +33,6 @@ extern void pmac_setup_pci_dma(void);
 extern void pmac_check_ht_link(void);
 
 extern void pmac_setup_smp(void);
-extern void pmac32_cpu_die(void);
 extern void low_cpu_die(void) __attribute__((noreturn));
 
 extern int pmac_nvram_init(void);
index d5aceb7..aa45281 100644 (file)
@@ -650,51 +650,6 @@ static int pmac_pci_probe_mode(struct pci_bus *bus)
                return PCI_PROBE_NORMAL;
        return PCI_PROBE_DEVTREE;
 }
-
-#ifdef CONFIG_HOTPLUG_CPU
-/* access per cpu vars from generic smp.c */
-DECLARE_PER_CPU(int, cpu_state);
-
-static void pmac64_cpu_die(void)
-{
-       /*
-        * turn off as much as possible, we'll be
-        * kicked out as this will only be invoked
-        * on core99 platforms for now ...
-        */
-
-       printk(KERN_INFO "CPU#%d offline\n", smp_processor_id());
-       __get_cpu_var(cpu_state) = CPU_DEAD;
-       smp_wmb();
-
-       /*
-        * during the path that leads here preemption is disabled,
-        * reenable it now so that when coming up preempt count is
-        * zero correctly
-        */
-       preempt_enable();
-
-       /*
-        * hard-disable interrupts for the non-NAP case, the NAP code
-        * needs to re-enable interrupts (but soft-disables them)
-        */
-       hard_irq_disable();
-
-       while (1) {
-               /* let's not take timer interrupts too often ... */
-               set_dec(0x7fffffff);
-
-               /* should always be true at this point */
-               if (cpu_has_feature(CPU_FTR_CAN_NAP))
-                       power4_cpu_offline_powersave();
-               else {
-                       HMT_low();
-                       HMT_very_low();
-               }
-       }
-}
-#endif /* CONFIG_HOTPLUG_CPU */
-
 #endif /* CONFIG_PPC64 */
 
 define_machine(powermac) {
@@ -726,15 +681,4 @@ define_machine(powermac) {
        .pcibios_after_init     = pmac_pcibios_after_init,
        .phys_mem_access_prot   = pci_phys_mem_access_prot,
 #endif
-#ifdef CONFIG_HOTPLUG_CPU
-#ifdef CONFIG_PPC64
-       .cpu_die                = pmac64_cpu_die,
-#endif
-#ifdef CONFIG_PPC32
-       .cpu_die                = pmac32_cpu_die,
-#endif
-#endif
-#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC32)
-       .cpu_die                = generic_mach_cpu_die,
-#endif
 };
index eda4709..50e15b4 100644 (file)
@@ -865,7 +865,7 @@ static void __devinit smp_core99_setup_cpu(int cpu_nr)
 }
 
 
-#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC32)
+#ifdef CONFIG_HOTPLUG_CPU
 
 static int smp_core99_cpu_disable(void)
 {
@@ -878,7 +878,9 @@ static int smp_core99_cpu_disable(void)
        return 0;
 }
 
-void pmac32_cpu_die(void)
+#ifdef CONFIG_PPC32
+
+static void pmac_cpu_die(void)
 {
        local_irq_disable();
        idle_task_exit();
@@ -889,7 +891,52 @@ void pmac32_cpu_die(void)
        low_cpu_die();
 }
 
-#endif /* CONFIG_HOTPLUG_CPU && CONFIG_PP32 */
+#else /* CONFIG_PPC32 */
+
+static void pmac_cpu_die(void)
+{
+       local_irq_disable();
+       idle_task_exit();
+
+       /*
+        * turn off as much as possible, we'll be
+        * kicked out as this will only be invoked
+        * on core99 platforms for now ...
+        */
+
+       printk(KERN_INFO "CPU#%d offline\n", smp_processor_id());
+       __get_cpu_var(cpu_state) = CPU_DEAD;
+       smp_wmb();
+
+       /*
+        * during the path that leads here preemption is disabled,
+        * reenable it now so that when coming up preempt count is
+        * zero correctly
+        */
+       preempt_enable();
+
+       /*
+        * hard-disable interrupts for the non-NAP case, the NAP code
+        * needs to re-enable interrupts (but soft-disables them)
+        */
+       hard_irq_disable();
+
+       while (1) {
+               /* let's not take timer interrupts too often ... */
+               set_dec(0x7fffffff);
+
+               /* should always be true at this point */
+               if (cpu_has_feature(CPU_FTR_CAN_NAP))
+                       power4_cpu_offline_powersave();
+               else {
+                       HMT_low();
+                       HMT_very_low();
+               }
+       }
+}
+
+#endif /* else CONFIG_PPC32 */
+#endif /* CONFIG_HOTPLUG_CPU */
 
 /* Core99 Macs (dual G4s and G5s) */
 struct smp_ops_t core99_smp_ops = {
@@ -933,5 +980,10 @@ void __init pmac_setup_smp(void)
                smp_ops = &psurge_smp_ops;
        }
 #endif /* CONFIG_PPC32 */
+
+#ifdef CONFIG_HOTPLUG_CPU
+       ppc_md.cpu_die = pmac_cpu_die;
+#endif
 }
 
+