Multiple peripherals in SPEAr share common hardware interrupt lines.
This patch adds support for a shared irq layer, which registers hardware
irqs by itself and exposes virtual irq numbers to peripherals.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
#ifndef __MACH_IRQS_H
#define __MACH_IRQS_H
-/* IRQ definitions */
+/* SPEAr3xx IRQ definitions */
#define IRQ_HW_ACCEL_MOD_0 0
#define IRQ_INTRCOMM_RAS_ARM 1
#define IRQ_CPU_GPT1_1 2
#define IRQ_HW_ACCEL_MOD_1 31
#define IRQ_VIC_END 32
-#define SPEAR_GPIO_INT_BASE IRQ_VIC_END
+#define VIRQ_START IRQ_VIC_END
+/* SPEAr300 Virtual irq definitions */
#ifdef CONFIG_MACH_SPEAR300
-#define SPEAR_GPIO1_INT_BASE (SPEAR_GPIO_INT_BASE + 8)
-#define SPEAR_GPIO_INT_END (SPEAR_GPIO1_INT_BASE + 8)
+/* IRQs sharing IRQ_GEN_RAS_1 */
+#define VIRQ_IT_PERS_S (VIRQ_START + 0)
+#define VIRQ_IT_CHANGE_S (VIRQ_START + 1)
+#define VIRQ_I2S (VIRQ_START + 2)
+#define VIRQ_TDM (VIRQ_START + 3)
+#define VIRQ_CAMERA_L (VIRQ_START + 4)
+#define VIRQ_CAMERA_F (VIRQ_START + 5)
+#define VIRQ_CAMERA_V (VIRQ_START + 6)
+#define VIRQ_KEYBOARD (VIRQ_START + 7)
+#define VIRQ_GPIO1 (VIRQ_START + 8)
+
+/* IRQs sharing IRQ_GEN_RAS_3 */
+#define IRQ_CLCD IRQ_GEN_RAS_3
+
+/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
+#define IRQ_SDIO IRQ_INTRCOMM_RAS_ARM
+
+/* GPIO pins virtual irqs */
+#define SPEAR_GPIO_INT_BASE (VIRQ_START + 9)
+#define SPEAR_GPIO1_INT_BASE (SPEAR_GPIO_INT_BASE + 8)
+#define SPEAR_GPIO_INT_END (SPEAR_GPIO1_INT_BASE + 8)
+
+/* SPEAr310 Virtual irq definitions */
+#elif defined(CONFIG_MACH_SPEAR310)
+/* IRQs sharing IRQ_GEN_RAS_1 */
+#define VIRQ_SMII0 (VIRQ_START + 0)
+#define VIRQ_SMII1 (VIRQ_START + 1)
+#define VIRQ_SMII2 (VIRQ_START + 2)
+#define VIRQ_SMII3 (VIRQ_START + 3)
+#define VIRQ_WAKEUP_SMII0 (VIRQ_START + 4)
+#define VIRQ_WAKEUP_SMII1 (VIRQ_START + 5)
+#define VIRQ_WAKEUP_SMII2 (VIRQ_START + 6)
+#define VIRQ_WAKEUP_SMII3 (VIRQ_START + 7)
+
+/* IRQs sharing IRQ_GEN_RAS_2 */
+#define VIRQ_UART1 (VIRQ_START + 8)
+#define VIRQ_UART2 (VIRQ_START + 9)
+#define VIRQ_UART3 (VIRQ_START + 10)
+#define VIRQ_UART4 (VIRQ_START + 11)
+#define VIRQ_UART5 (VIRQ_START + 12)
+
+/* IRQs sharing IRQ_GEN_RAS_3 */
+#define VIRQ_EMI (VIRQ_START + 13)
+#define VIRQ_PLGPIO (VIRQ_START + 14)
+
+/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
+#define VIRQ_TDM_HDLC (VIRQ_START + 15)
+#define VIRQ_RS485_0 (VIRQ_START + 16)
+#define VIRQ_RS485_1 (VIRQ_START + 17)
+
+/* GPIO pins virtual irqs */
+#define SPEAR_GPIO_INT_BASE (VIRQ_START + 18)
+
+/* SPEAr320 Virtual irq definitions */
#else
-#define SPEAR_GPIO_INT_END (SPEAR_GPIO_INT_BASE + 8)
+/* IRQs sharing IRQ_GEN_RAS_1 */
+#define VIRQ_EMI (VIRQ_START + 0)
+#define VIRQ_CLCD (VIRQ_START + 1)
+#define VIRQ_SPP (VIRQ_START + 2)
+
+/* IRQs sharing IRQ_GEN_RAS_2 */
+#define IRQ_SDIO IRQ_GEN_RAS_2
+
+/* IRQs sharing IRQ_GEN_RAS_3 */
+#define VIRQ_PLGPIO (VIRQ_START + 3)
+#define VIRQ_I2S_PLAY (VIRQ_START + 4)
+#define VIRQ_I2S_REC (VIRQ_START + 5)
+
+/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
+#define VIRQ_CANU (VIRQ_START + 6)
+#define VIRQ_CANL (VIRQ_START + 7)
+#define VIRQ_UART1 (VIRQ_START + 8)
+#define VIRQ_UART2 (VIRQ_START + 9)
+#define VIRQ_SSP1 (VIRQ_START + 10)
+#define VIRQ_SSP2 (VIRQ_START + 11)
+#define VIRQ_SMII0 (VIRQ_START + 12)
+#define VIRQ_MII1_SMII1 (VIRQ_START + 13)
+#define VIRQ_WAKEUP_SMII0 (VIRQ_START + 14)
+#define VIRQ_WAKEUP_MII1_SMII1 (VIRQ_START + 15)
+#define VIRQ_I2C (VIRQ_START + 16)
+
+/* GPIO pins virtual irqs */
+#define SPEAR_GPIO_INT_BASE (VIRQ_START + 17)
+
+#endif
+
+/* PLGPIO Virtual IRQs */
+#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
+#define SPEAR_PLGPIO_INT_BASE (SPEAR_GPIO_INT_BASE + 8)
+#define SPEAR_GPIO_INT_END (SPEAR_PLGPIO_INT_BASE + 102)
#endif
-#define VIRTUAL_IRQS (SPEAR_GPIO_INT_END - IRQ_VIC_END)
-#define NR_IRQS (IRQ_VIC_END + VIRTUAL_IRQS)
+#define VIRQ_END SPEAR_GPIO_INT_END
+#define NR_IRQS VIRQ_END
#endif /* __MACH_IRQS_H */
#define SPEAR300_TELECOM_BASE 0x50000000
#define SPEAR300_TELECOM_SIZE 0x10000000
+/* Interrupt registers offsets and masks */
+#define SPEAR300_TELECOM_REG_SIZE 0x00010000
+#define INT_ENB_MASK_REG 0x54
+#define INT_STS_MASK_REG 0x58
+#define IT_PERS_S_IRQ_MASK (1 << 0)
+#define IT_CHANGE_S_IRQ_MASK (1 << 1)
+#define I2S_IRQ_MASK (1 << 2)
+#define TDM_IRQ_MASK (1 << 3)
+#define CAMERA_L_IRQ_MASK (1 << 4)
+#define CAMERA_F_IRQ_MASK (1 << 5)
+#define CAMERA_V_IRQ_MASK (1 << 6)
+#define KEYBOARD_IRQ_MASK (1 << 7)
+#define GPIO1_IRQ_MASK (1 << 8)
+
+#define SHIRQ_RAS1_MASK 0x1FF
+
#define SPEAR300_CLCD_BASE 0x60000000
#define SPEAR300_CLCD_SIZE 0x10000000
#define SPEAR310_SOC_CONFIG_BASE 0xB4000000
#define SPEAR310_SOC_CONFIG_SIZE 0x00000070
+/* Interrupt registers offsets and masks */
+#define INT_STS_MASK_REG 0x04
+#define SMII0_IRQ_MASK (1 << 0)
+#define SMII1_IRQ_MASK (1 << 1)
+#define SMII2_IRQ_MASK (1 << 2)
+#define SMII3_IRQ_MASK (1 << 3)
+#define WAKEUP_SMII0_IRQ_MASK (1 << 4)
+#define WAKEUP_SMII1_IRQ_MASK (1 << 5)
+#define WAKEUP_SMII2_IRQ_MASK (1 << 6)
+#define WAKEUP_SMII3_IRQ_MASK (1 << 7)
+#define UART1_IRQ_MASK (1 << 8)
+#define UART2_IRQ_MASK (1 << 9)
+#define UART3_IRQ_MASK (1 << 10)
+#define UART4_IRQ_MASK (1 << 11)
+#define UART5_IRQ_MASK (1 << 12)
+#define EMI_IRQ_MASK (1 << 13)
+#define TDM_HDLC_IRQ_MASK (1 << 14)
+#define RS485_0_IRQ_MASK (1 << 15)
+#define RS485_1_IRQ_MASK (1 << 16)
+
+#define SHIRQ_RAS1_MASK 0x000FF
+#define SHIRQ_RAS2_MASK 0x01F00
+#define SHIRQ_RAS3_MASK 0x02000
+#define SHIRQ_INTRCOMM_RAS_MASK 0x1C000
#endif /* __MACH_SPEAR310_H */
#define SPEAR320_SOC_CONFIG_BASE 0xB4000000
#define SPEAR320_SOC_CONFIG_SIZE 0x00000070
+/* Interrupt registers offsets and masks */
+#define INT_STS_MASK_REG 0x04
+#define INT_CLR_MASK_REG 0x04
+#define INT_ENB_MASK_REG 0x08
+#define GPIO_IRQ_MASK (1 << 0)
+#define I2S_PLAY_IRQ_MASK (1 << 1)
+#define I2S_REC_IRQ_MASK (1 << 2)
+#define EMI_IRQ_MASK (1 << 7)
+#define CLCD_IRQ_MASK (1 << 8)
+#define SPP_IRQ_MASK (1 << 9)
+#define SDIO_IRQ_MASK (1 << 10)
+#define CAN_U_IRQ_MASK (1 << 11)
+#define CAN_L_IRQ_MASK (1 << 12)
+#define UART1_IRQ_MASK (1 << 13)
+#define UART2_IRQ_MASK (1 << 14)
+#define SSP1_IRQ_MASK (1 << 15)
+#define SSP2_IRQ_MASK (1 << 16)
+#define SMII0_IRQ_MASK (1 << 17)
+#define MII1_SMII1_IRQ_MASK (1 << 18)
+#define WAKEUP_SMII0_IRQ_MASK (1 << 19)
+#define WAKEUP_MII1_SMII1_IRQ_MASK (1 << 20)
+#define I2C1_IRQ_MASK (1 << 21)
+
+#define SHIRQ_RAS1_MASK 0x000380
+#define SHIRQ_RAS3_MASK 0x000007
+#define SHIRQ_INTRCOMM_RAS_MASK 0x3FF800
#endif /* __MACH_SPEAR320_H */
#include <asm/irq.h>
#include <mach/generic.h>
#include <mach/spear.h>
+#include <plat/shirq.h>
/* pad multiplexing support */
/* muxing registers */
.end = SPEAR300_GPIO_BASE + SPEAR300_GPIO_SIZE - 1,
.flags = IORESOURCE_MEM,
},
- .irq = {IRQ_GEN_RAS_1, NO_IRQ},
+ .irq = {VIRQ_GPIO1, NO_IRQ},
+};
+
+/* spear3xx shared irq */
+struct shirq_dev_config shirq_ras1_config[] = {
+ {
+ .virq = VIRQ_IT_PERS_S,
+ .enb_mask = IT_PERS_S_IRQ_MASK,
+ .status_mask = IT_PERS_S_IRQ_MASK,
+ }, {
+ .virq = VIRQ_IT_CHANGE_S,
+ .enb_mask = IT_CHANGE_S_IRQ_MASK,
+ .status_mask = IT_CHANGE_S_IRQ_MASK,
+ }, {
+ .virq = VIRQ_I2S,
+ .enb_mask = I2S_IRQ_MASK,
+ .status_mask = I2S_IRQ_MASK,
+ }, {
+ .virq = VIRQ_TDM,
+ .enb_mask = TDM_IRQ_MASK,
+ .status_mask = TDM_IRQ_MASK,
+ }, {
+ .virq = VIRQ_CAMERA_L,
+ .enb_mask = CAMERA_L_IRQ_MASK,
+ .status_mask = CAMERA_L_IRQ_MASK,
+ }, {
+ .virq = VIRQ_CAMERA_F,
+ .enb_mask = CAMERA_F_IRQ_MASK,
+ .status_mask = CAMERA_F_IRQ_MASK,
+ }, {
+ .virq = VIRQ_CAMERA_V,
+ .enb_mask = CAMERA_V_IRQ_MASK,
+ .status_mask = CAMERA_V_IRQ_MASK,
+ }, {
+ .virq = VIRQ_KEYBOARD,
+ .enb_mask = KEYBOARD_IRQ_MASK,
+ .status_mask = KEYBOARD_IRQ_MASK,
+ }, {
+ .virq = VIRQ_GPIO1,
+ .enb_mask = GPIO1_IRQ_MASK,
+ .status_mask = GPIO1_IRQ_MASK,
+ },
+};
+
+struct spear_shirq shirq_ras1 = {
+ .irq = IRQ_GEN_RAS_1,
+ .dev_config = shirq_ras1_config,
+ .dev_count = ARRAY_SIZE(shirq_ras1_config),
+ .regs = {
+ .enb_reg = INT_ENB_MASK_REG,
+ .status_reg = INT_STS_MASK_REG,
+ .status_reg_mask = SHIRQ_RAS1_MASK,
+ .clear_reg = -1,
+ },
};
/* spear300 routines */
void __init spear300_init(void)
{
+ int ret = 0;
+
/* call spear3xx family common init function */
spear3xx_init();
+
+ /* shared irq registeration */
+ shirq_ras1.regs.base =
+ ioremap(SPEAR300_TELECOM_BASE, SPEAR300_TELECOM_REG_SIZE);
+ if (shirq_ras1.regs.base) {
+ ret = spear_shirq_register(&shirq_ras1);
+ if (ret)
+ printk(KERN_ERR "Error registering Shared IRQ\n");
+ }
}
void spear300_pmx_init(void)
#include <asm/irq.h>
#include <mach/generic.h>
#include <mach/spear.h>
+#include <plat/shirq.h>
/* pad multiplexing support */
/* muxing registers */
/* Add spear310 specific devices here */
+/* spear3xx shared irq */
+struct shirq_dev_config shirq_ras1_config[] = {
+ {
+ .virq = VIRQ_SMII0,
+ .status_mask = SMII0_IRQ_MASK,
+ }, {
+ .virq = VIRQ_SMII1,
+ .status_mask = SMII1_IRQ_MASK,
+ }, {
+ .virq = VIRQ_SMII2,
+ .status_mask = SMII2_IRQ_MASK,
+ }, {
+ .virq = VIRQ_SMII3,
+ .status_mask = SMII3_IRQ_MASK,
+ }, {
+ .virq = VIRQ_WAKEUP_SMII0,
+ .status_mask = WAKEUP_SMII0_IRQ_MASK,
+ }, {
+ .virq = VIRQ_WAKEUP_SMII1,
+ .status_mask = WAKEUP_SMII1_IRQ_MASK,
+ }, {
+ .virq = VIRQ_WAKEUP_SMII2,
+ .status_mask = WAKEUP_SMII2_IRQ_MASK,
+ }, {
+ .virq = VIRQ_WAKEUP_SMII3,
+ .status_mask = WAKEUP_SMII3_IRQ_MASK,
+ },
+};
+
+struct spear_shirq shirq_ras1 = {
+ .irq = IRQ_GEN_RAS_1,
+ .dev_config = shirq_ras1_config,
+ .dev_count = ARRAY_SIZE(shirq_ras1_config),
+ .regs = {
+ .enb_reg = -1,
+ .status_reg = INT_STS_MASK_REG,
+ .status_reg_mask = SHIRQ_RAS1_MASK,
+ .clear_reg = -1,
+ },
+};
+
+struct shirq_dev_config shirq_ras2_config[] = {
+ {
+ .virq = VIRQ_UART1,
+ .status_mask = UART1_IRQ_MASK,
+ }, {
+ .virq = VIRQ_UART2,
+ .status_mask = UART2_IRQ_MASK,
+ }, {
+ .virq = VIRQ_UART3,
+ .status_mask = UART3_IRQ_MASK,
+ }, {
+ .virq = VIRQ_UART4,
+ .status_mask = UART4_IRQ_MASK,
+ }, {
+ .virq = VIRQ_UART5,
+ .status_mask = UART5_IRQ_MASK,
+ },
+};
+
+struct spear_shirq shirq_ras2 = {
+ .irq = IRQ_GEN_RAS_2,
+ .dev_config = shirq_ras2_config,
+ .dev_count = ARRAY_SIZE(shirq_ras2_config),
+ .regs = {
+ .enb_reg = -1,
+ .status_reg = INT_STS_MASK_REG,
+ .status_reg_mask = SHIRQ_RAS2_MASK,
+ .clear_reg = -1,
+ },
+};
+
+struct shirq_dev_config shirq_ras3_config[] = {
+ {
+ .virq = VIRQ_EMI,
+ .status_mask = EMI_IRQ_MASK,
+ },
+};
+
+struct spear_shirq shirq_ras3 = {
+ .irq = IRQ_GEN_RAS_3,
+ .dev_config = shirq_ras3_config,
+ .dev_count = ARRAY_SIZE(shirq_ras3_config),
+ .regs = {
+ .enb_reg = -1,
+ .status_reg = INT_STS_MASK_REG,
+ .status_reg_mask = SHIRQ_RAS3_MASK,
+ .clear_reg = -1,
+ },
+};
+
+struct shirq_dev_config shirq_intrcomm_ras_config[] = {
+ {
+ .virq = VIRQ_TDM_HDLC,
+ .status_mask = TDM_HDLC_IRQ_MASK,
+ }, {
+ .virq = VIRQ_RS485_0,
+ .status_mask = RS485_0_IRQ_MASK,
+ }, {
+ .virq = VIRQ_RS485_1,
+ .status_mask = RS485_1_IRQ_MASK,
+ },
+};
+
+struct spear_shirq shirq_intrcomm_ras = {
+ .irq = IRQ_INTRCOMM_RAS_ARM,
+ .dev_config = shirq_intrcomm_ras_config,
+ .dev_count = ARRAY_SIZE(shirq_intrcomm_ras_config),
+ .regs = {
+ .enb_reg = -1,
+ .status_reg = INT_STS_MASK_REG,
+ .status_reg_mask = SHIRQ_INTRCOMM_RAS_MASK,
+ .clear_reg = -1,
+ },
+};
+
/* spear310 routines */
void __init spear310_init(void)
{
+ void __iomem *base;
+ int ret = 0;
+
/* call spear3xx family common init function */
spear3xx_init();
+
+ /* shared irq registeration */
+ base = ioremap(SPEAR310_SOC_CONFIG_BASE, SPEAR310_SOC_CONFIG_SIZE);
+ if (base) {
+ /* shirq 1 */
+ shirq_ras1.regs.base = base;
+ ret = spear_shirq_register(&shirq_ras1);
+ if (ret)
+ printk(KERN_ERR "Error registering Shared IRQ 1\n");
+
+ /* shirq 2 */
+ shirq_ras2.regs.base = base;
+ ret = spear_shirq_register(&shirq_ras2);
+ if (ret)
+ printk(KERN_ERR "Error registering Shared IRQ 2\n");
+
+ /* shirq 3 */
+ shirq_ras3.regs.base = base;
+ ret = spear_shirq_register(&shirq_ras3);
+ if (ret)
+ printk(KERN_ERR "Error registering Shared IRQ 3\n");
+
+ /* shirq 4 */
+ shirq_intrcomm_ras.regs.base = base;
+ ret = spear_shirq_register(&shirq_intrcomm_ras);
+ if (ret)
+ printk(KERN_ERR "Error registering Shared IRQ 4\n");
+ }
}
void spear310_pmx_init(void)
#include <asm/irq.h>
#include <mach/generic.h>
#include <mach/spear.h>
+#include <plat/shirq.h>
/* pad multiplexing support */
/* muxing registers */
/* Add spear320 specific devices here */
+/* spear3xx shared irq */
+struct shirq_dev_config shirq_ras1_config[] = {
+ {
+ .virq = VIRQ_EMI,
+ .status_mask = EMI_IRQ_MASK,
+ .clear_mask = EMI_IRQ_MASK,
+ }, {
+ .virq = VIRQ_CLCD,
+ .status_mask = CLCD_IRQ_MASK,
+ .clear_mask = CLCD_IRQ_MASK,
+ }, {
+ .virq = VIRQ_SPP,
+ .status_mask = SPP_IRQ_MASK,
+ .clear_mask = SPP_IRQ_MASK,
+ },
+};
+
+struct spear_shirq shirq_ras1 = {
+ .irq = IRQ_GEN_RAS_1,
+ .dev_config = shirq_ras1_config,
+ .dev_count = ARRAY_SIZE(shirq_ras1_config),
+ .regs = {
+ .enb_reg = -1,
+ .status_reg = INT_STS_MASK_REG,
+ .status_reg_mask = SHIRQ_RAS1_MASK,
+ .clear_reg = INT_CLR_MASK_REG,
+ .reset_to_clear = 1,
+ },
+};
+
+struct shirq_dev_config shirq_ras3_config[] = {
+ {
+ .virq = VIRQ_PLGPIO,
+ .enb_mask = GPIO_IRQ_MASK,
+ .status_mask = GPIO_IRQ_MASK,
+ .clear_mask = GPIO_IRQ_MASK,
+ }, {
+ .virq = VIRQ_I2S_PLAY,
+ .enb_mask = I2S_PLAY_IRQ_MASK,
+ .status_mask = I2S_PLAY_IRQ_MASK,
+ .clear_mask = I2S_PLAY_IRQ_MASK,
+ }, {
+ .virq = VIRQ_I2S_REC,
+ .enb_mask = I2S_REC_IRQ_MASK,
+ .status_mask = I2S_REC_IRQ_MASK,
+ .clear_mask = I2S_REC_IRQ_MASK,
+ },
+};
+
+struct spear_shirq shirq_ras3 = {
+ .irq = IRQ_GEN_RAS_3,
+ .dev_config = shirq_ras3_config,
+ .dev_count = ARRAY_SIZE(shirq_ras3_config),
+ .regs = {
+ .enb_reg = INT_ENB_MASK_REG,
+ .reset_to_enb = 1,
+ .status_reg = INT_STS_MASK_REG,
+ .status_reg_mask = SHIRQ_RAS3_MASK,
+ .clear_reg = INT_CLR_MASK_REG,
+ .reset_to_clear = 1,
+ },
+};
+
+struct shirq_dev_config shirq_intrcomm_ras_config[] = {
+ {
+ .virq = VIRQ_CANU,
+ .status_mask = CAN_U_IRQ_MASK,
+ .clear_mask = CAN_U_IRQ_MASK,
+ }, {
+ .virq = VIRQ_CANL,
+ .status_mask = CAN_L_IRQ_MASK,
+ .clear_mask = CAN_L_IRQ_MASK,
+ }, {
+ .virq = VIRQ_UART1,
+ .status_mask = UART1_IRQ_MASK,
+ .clear_mask = UART1_IRQ_MASK,
+ }, {
+ .virq = VIRQ_UART2,
+ .status_mask = UART2_IRQ_MASK,
+ .clear_mask = UART2_IRQ_MASK,
+ }, {
+ .virq = VIRQ_SSP1,
+ .status_mask = SSP1_IRQ_MASK,
+ .clear_mask = SSP1_IRQ_MASK,
+ }, {
+ .virq = VIRQ_SSP2,
+ .status_mask = SSP2_IRQ_MASK,
+ .clear_mask = SSP2_IRQ_MASK,
+ }, {
+ .virq = VIRQ_SMII0,
+ .status_mask = SMII0_IRQ_MASK,
+ .clear_mask = SMII0_IRQ_MASK,
+ }, {
+ .virq = VIRQ_MII1_SMII1,
+ .status_mask = MII1_SMII1_IRQ_MASK,
+ .clear_mask = MII1_SMII1_IRQ_MASK,
+ }, {
+ .virq = VIRQ_WAKEUP_SMII0,
+ .status_mask = WAKEUP_SMII0_IRQ_MASK,
+ .clear_mask = WAKEUP_SMII0_IRQ_MASK,
+ }, {
+ .virq = VIRQ_WAKEUP_MII1_SMII1,
+ .status_mask = WAKEUP_MII1_SMII1_IRQ_MASK,
+ .clear_mask = WAKEUP_MII1_SMII1_IRQ_MASK,
+ }, {
+ .virq = VIRQ_I2C,
+ .status_mask = I2C1_IRQ_MASK,
+ .clear_mask = I2C1_IRQ_MASK,
+ },
+};
+
+struct spear_shirq shirq_intrcomm_ras = {
+ .irq = IRQ_INTRCOMM_RAS_ARM,
+ .dev_config = shirq_intrcomm_ras_config,
+ .dev_count = ARRAY_SIZE(shirq_intrcomm_ras_config),
+ .regs = {
+ .enb_reg = -1,
+ .status_reg = INT_STS_MASK_REG,
+ .status_reg_mask = SHIRQ_INTRCOMM_RAS_MASK,
+ .clear_reg = INT_CLR_MASK_REG,
+ .reset_to_clear = 1,
+ },
+};
+
/* spear320 routines */
void __init spear320_init(void)
{
+ void __iomem *base;
+ int ret = 0;
+
/* call spear3xx family common init function */
spear3xx_init();
+
+ /* shared irq registeration */
+ base = ioremap(SPEAR320_SOC_CONFIG_BASE, SPEAR320_SOC_CONFIG_SIZE);
+ if (base) {
+ /* shirq 1 */
+ shirq_ras1.regs.base = base;
+ ret = spear_shirq_register(&shirq_ras1);
+ if (ret)
+ printk(KERN_ERR "Error registering Shared IRQ 1\n");
+
+ /* shirq 3 */
+ shirq_ras3.regs.base = base;
+ ret = spear_shirq_register(&shirq_ras3);
+ if (ret)
+ printk(KERN_ERR "Error registering Shared IRQ 3\n");
+
+ /* shirq 4 */
+ shirq_intrcomm_ras.regs.base = base;
+ ret = spear_shirq_register(&shirq_intrcomm_ras);
+ if (ret)
+ printk(KERN_ERR "Error registering Shared IRQ 4\n");
+ }
}
void spear320_pmx_init(void)
#define IRQ_VIC_END 64
+/* GPIO pins virtual irqs */
#define SPEAR_GPIO_INT_BASE IRQ_VIC_END
#define SPEAR_GPIO0_INT_BASE SPEAR_GPIO_INT_BASE
#define SPEAR_GPIO1_INT_BASE (SPEAR_GPIO0_INT_BASE + 8)
# Common support
obj-y := clock.o padmux.o time.o
+
+obj-$(CONFIG_ARCH_SPEAR3XX) += shirq.o
--- /dev/null
+/*
+ * arch/arm/plat-spear/include/plat/shirq.h
+ *
+ * SPEAr platform shared irq layer header file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_SHIRQ_H
+#define __PLAT_SHIRQ_H
+
+#include <linux/irq.h>
+#include <linux/types.h>
+
+/*
+ * struct shirq_dev_config: shared irq device configuration
+ *
+ * virq: virtual irq number of device
+ * enb_mask: enable mask of device
+ * status_mask: status mask of device
+ * clear_mask: clear mask of device
+ */
+struct shirq_dev_config {
+ u32 virq;
+ u32 enb_mask;
+ u32 status_mask;
+ u32 clear_mask;
+};
+
+/*
+ * struct shirq_regs: shared irq register configuration
+ *
+ * base: base address of shared irq register
+ * enb_reg: enable register offset
+ * reset_to_enb: val 1 indicates, we need to clear bit for enabling interrupt
+ * status_reg: status register offset
+ * status_reg_mask: status register valid mask
+ * clear_reg: clear register offset
+ * reset_to_clear: val 1 indicates, we need to clear bit for clearing interrupt
+ */
+struct shirq_regs {
+ void __iomem *base;
+ u32 enb_reg;
+ u32 reset_to_enb;
+ u32 status_reg;
+ u32 status_reg_mask;
+ u32 clear_reg;
+ u32 reset_to_clear;
+};
+
+/*
+ * struct spear_shirq: shared irq structure
+ *
+ * irq: hardware irq number
+ * dev_config: array of device config structures which are using "irq" line
+ * dev_count: size of dev_config array
+ * regs: register configuration for shared irq block
+ */
+struct spear_shirq {
+ u32 irq;
+ struct shirq_dev_config *dev_config;
+ u32 dev_count;
+ struct shirq_regs regs;
+};
+
+int spear_shirq_register(struct spear_shirq *shirq);
+
+#endif /* __PLAT_SHIRQ_H */
--- /dev/null
+/*
+ * arch/arm/plat-spear/shirq.c
+ *
+ * SPEAr platform shared irq layer source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/spinlock.h>
+#include <plat/shirq.h>
+
+struct spear_shirq *shirq;
+static DEFINE_SPINLOCK(lock);
+
+static void shirq_irq_mask(unsigned irq)
+{
+ struct spear_shirq *shirq = get_irq_chip_data(irq);
+ u32 val, id = irq - shirq->dev_config[0].virq;
+ unsigned long flags;
+
+ if ((shirq->regs.enb_reg == -1) || shirq->dev_config[id].enb_mask == -1)
+ return;
+
+ spin_lock_irqsave(&lock, flags);
+ val = readl(shirq->regs.base + shirq->regs.enb_reg);
+ if (shirq->regs.reset_to_enb)
+ val |= shirq->dev_config[id].enb_mask;
+ else
+ val &= ~(shirq->dev_config[id].enb_mask);
+ writel(val, shirq->regs.base + shirq->regs.enb_reg);
+ spin_unlock_irqrestore(&lock, flags);
+}
+
+static void shirq_irq_unmask(unsigned irq)
+{
+ struct spear_shirq *shirq = get_irq_chip_data(irq);
+ u32 val, id = irq - shirq->dev_config[0].virq;
+ unsigned long flags;
+
+ if ((shirq->regs.enb_reg == -1) || shirq->dev_config[id].enb_mask == -1)
+ return;
+
+ spin_lock_irqsave(&lock, flags);
+ val = readl(shirq->regs.base + shirq->regs.enb_reg);
+ if (shirq->regs.reset_to_enb)
+ val &= ~(shirq->dev_config[id].enb_mask);
+ else
+ val |= shirq->dev_config[id].enb_mask;
+ writel(val, shirq->regs.base + shirq->regs.enb_reg);
+ spin_unlock_irqrestore(&lock, flags);
+}
+
+static struct irq_chip shirq_chip = {
+ .name = "spear_shirq",
+ .ack = shirq_irq_mask,
+ .mask = shirq_irq_mask,
+ .unmask = shirq_irq_unmask,
+};
+
+static void shirq_handler(unsigned irq, struct irq_desc *desc)
+{
+ u32 i, val, mask;
+ struct spear_shirq *shirq = get_irq_data(irq);
+
+ desc->chip->ack(irq);
+ while ((val = readl(shirq->regs.base + shirq->regs.status_reg) &
+ shirq->regs.status_reg_mask)) {
+ for (i = 0; (i < shirq->dev_count) && val; i++) {
+ if (!(shirq->dev_config[i].status_mask & val))
+ continue;
+
+ generic_handle_irq(shirq->dev_config[i].virq);
+
+ /* clear interrupt */
+ val &= ~shirq->dev_config[i].status_mask;
+ if ((shirq->regs.clear_reg == -1) ||
+ shirq->dev_config[i].clear_mask == -1)
+ continue;
+ mask = readl(shirq->regs.base + shirq->regs.clear_reg);
+ if (shirq->regs.reset_to_clear)
+ mask &= ~shirq->dev_config[i].clear_mask;
+ else
+ mask |= shirq->dev_config[i].clear_mask;
+ writel(mask, shirq->regs.base + shirq->regs.clear_reg);
+ }
+ }
+ desc->chip->unmask(irq);
+}
+
+int spear_shirq_register(struct spear_shirq *shirq)
+{
+ int i;
+
+ if (!shirq || !shirq->dev_config || !shirq->regs.base)
+ return -EFAULT;
+
+ if (!shirq->dev_count)
+ return -EINVAL;
+
+ set_irq_chained_handler(shirq->irq, shirq_handler);
+ for (i = 0; i < shirq->dev_count; i++) {
+ set_irq_chip(shirq->dev_config[i].virq, &shirq_chip);
+ set_irq_handler(shirq->dev_config[i].virq, handle_simple_irq);
+ set_irq_flags(shirq->dev_config[i].virq, IRQF_VALID);
+ set_irq_chip_data(shirq->dev_config[i].virq, shirq);
+ }
+
+ set_irq_data(shirq->irq, shirq);
+ return 0;
+}
projects / profile / common / kernel-common.git / commitdiff