ARM: mx27_3ds: Add camera support
authorFabio Estevam <festevam@gmail.com>
Wed, 15 Feb 2012 21:36:10 +0000 (19:36 -0200)
committerSascha Hauer <s.hauer@pengutronix.de>
Mon, 27 Feb 2012 09:13:51 +0000 (10:13 +0100)
mx27_3ds has an OV2640 camera connected on i2c0.

Add support for it.

Tested through the following Gstreamer pipeline:

gst-launch -v v4l2src device=/dev/video0 ! video/x-raw-yuv,width=320,height=240,framerate=25/1 ! ffmpegcolorspace ! fbdevsink

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
arch/arm/mach-imx/Kconfig
arch/arm/mach-imx/mach-mx27_3ds.c

index 4defb97..f7da872 100644 (file)
@@ -304,6 +304,7 @@ config MACH_MX27_3DS
        select IMX_HAVE_PLATFORM_IMX_I2C
        select IMX_HAVE_PLATFORM_IMX_KEYPAD
        select IMX_HAVE_PLATFORM_IMX_UART
+       select IMX_HAVE_PLATFORM_MX2_CAMERA
        select IMX_HAVE_PLATFORM_MXC_EHCI
        select IMX_HAVE_PLATFORM_MXC_MMC
        select IMX_HAVE_PLATFORM_SPI_IMX
index 18f3581..c6d385c 100644 (file)
@@ -31,6 +31,8 @@
 #include <linux/regulator/machine.h>
 #include <linux/spi/l4f00242t03.h>
 
+#include <media/soc_camera.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
@@ -52,6 +54,8 @@
 #define SD1_CD                 IMX_GPIO_NR(2, 26)
 #define LCD_RESET              IMX_GPIO_NR(1, 3)
 #define LCD_ENABLE             IMX_GPIO_NR(1, 31)
+#define CSI_PWRDWN             IMX_GPIO_NR(4, 19)
+#define CSI_RESET              IMX_GPIO_NR(3, 6)
 
 static const int mx27pdk_pins[] __initconst = {
        /* UART1 */
@@ -141,6 +145,26 @@ static const int mx27pdk_pins[] __initconst = {
        PA30_PF_CONTRAST,
        LCD_ENABLE | GPIO_GPIO | GPIO_OUT,
        LCD_RESET | GPIO_GPIO | GPIO_OUT,
+       /* CSI */
+       PB10_PF_CSI_D0,
+       PB11_PF_CSI_D1,
+       PB12_PF_CSI_D2,
+       PB13_PF_CSI_D3,
+       PB14_PF_CSI_D4,
+       PB15_PF_CSI_MCLK,
+       PB16_PF_CSI_PIXCLK,
+       PB17_PF_CSI_D5,
+       PB18_PF_CSI_D6,
+       PB19_PF_CSI_D7,
+       PB20_PF_CSI_VSYNC,
+       PB21_PF_CSI_HSYNC,
+       CSI_PWRDWN | GPIO_GPIO | GPIO_OUT,
+       CSI_RESET | GPIO_GPIO | GPIO_OUT,
+};
+
+static struct gpio mx27_3ds_camera_gpios[] = {
+       { CSI_PWRDWN, GPIOF_OUT_INIT_HIGH, "camera-power" },
+       { CSI_RESET, GPIOF_OUT_INIT_HIGH, "camera-reset" },
 };
 
 static const struct imxuart_platform_data uart_pdata __initconst = {
@@ -242,6 +266,7 @@ static struct regulator_init_data gpo_init = {
 
 static struct regulator_consumer_supply vmmc1_consumers[] = {
        REGULATOR_SUPPLY("vcore", "spi0.0"),
+       REGULATOR_SUPPLY("cmos_2v8", "soc-camera-pdrv.0"),
 };
 
 static struct regulator_init_data vmmc1_init = {
@@ -270,6 +295,22 @@ static struct regulator_init_data vgen_init = {
        .consumer_supplies = vgen_consumers,
 };
 
+static struct regulator_consumer_supply vvib_consumers[] = {
+       REGULATOR_SUPPLY("cmos_vcore", "soc-camera-pdrv.0"),
+};
+
+static struct regulator_init_data vvib_init = {
+       .constraints = {
+               .min_uV = 1300000,
+               .max_uV = 1300000,
+               .apply_uV = 1,
+               .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+                                 REGULATOR_CHANGE_STATUS,
+       },
+       .num_consumer_supplies = ARRAY_SIZE(vvib_consumers),
+       .consumer_supplies = vvib_consumers,
+};
+
 static struct mc13xxx_regulator_init_data mx27_3ds_regulators[] = {
        {
                .id = MC13783_REG_VMMC1,
@@ -283,6 +324,9 @@ static struct mc13xxx_regulator_init_data mx27_3ds_regulators[] = {
        }, {
                .id = MC13783_REG_GPO3, /* Turn on 3.3V */
                .init_data = &gpo_init,
+       }, {
+               .id = MC13783_REG_VVIB,  /* Power OV2640 */
+               .init_data = &vvib_init,
        },
 };
 
@@ -311,6 +355,51 @@ static const struct spi_imx_master spi2_pdata __initconst = {
        .num_chipselect = ARRAY_SIZE(spi2_chipselect),
 };
 
+static int mx27_3ds_camera_power(struct device *dev, int on)
+{
+       /* enable or disable the camera */
+       pr_debug("%s: %s the camera\n", __func__, on ? "ENABLE" : "DISABLE");
+       gpio_set_value(CSI_PWRDWN, on ? 0 : 1);
+
+       if (!on)
+               goto out;
+
+       /* If enabled, give a reset impulse */
+       gpio_set_value(CSI_RESET, 0);
+       msleep(20);
+       gpio_set_value(CSI_RESET, 1);
+       msleep(100);
+
+out:
+       return 0;
+}
+
+static struct i2c_board_info mx27_3ds_i2c_camera = {
+       I2C_BOARD_INFO("ov2640", 0x30),
+};
+
+static struct regulator_bulk_data mx27_3ds_camera_regs[] = {
+       { .supply = "cmos_vcore" },
+       { .supply = "cmos_2v8" },
+};
+
+static struct soc_camera_link iclink_ov2640 = {
+       .bus_id         = 0,
+       .board_info     = &mx27_3ds_i2c_camera,
+       .i2c_adapter_id = 0,
+       .power          = mx27_3ds_camera_power,
+       .regulators     = mx27_3ds_camera_regs,
+       .num_regulators = ARRAY_SIZE(mx27_3ds_camera_regs),
+};
+
+static struct platform_device mx27_3ds_ov2640 = {
+       .name   = "soc-camera-pdrv",
+       .id     = 0,
+       .dev    = {
+               .platform_data = &iclink_ov2640,
+       },
+};
+
 static struct imx_fb_videomode mx27_3ds_modes[] = {
        {       /* 480x640 @ 60 Hz */
                .mode = {
@@ -367,12 +456,21 @@ static struct spi_board_info mx27_3ds_spi_devs[] __initdata = {
        },
 };
 
+static struct platform_device *devices[] __initdata = {
+       &mx27_3ds_ov2640,
+};
+
+static const struct mx2_camera_platform_data mx27_3ds_cam_pdata __initconst = {
+       .clk = 26000000,
+};
+
 static const struct imxi2c_platform_data mx27_3ds_i2c0_data __initconst = {
        .bitrate = 100000,
 };
 
 static void __init mx27pdk_init(void)
 {
+       int ret;
        imx27_soc_init();
 
        mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
@@ -404,7 +502,17 @@ static void __init mx27pdk_init(void)
        if (mxc_expio_init(MX27_CS5_BASE_ADDR, EXPIO_PARENT_INT))
                pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n");
        imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data);
+       platform_add_devices(devices, ARRAY_SIZE(devices));
        imx27_add_imx_fb(&mx27_3ds_fb_data);
+
+       ret = gpio_request_array(mx27_3ds_camera_gpios,
+                                ARRAY_SIZE(mx27_3ds_camera_gpios));
+       if (ret) {
+               pr_err("Failed to request camera gpios");
+               iclink_ov2640.power = NULL;
+       }
+
+       imx27_add_mx2_camera(&mx27_3ds_cam_pdata);
 }
 
 static void __init mx27pdk_timer_init(void)