static int imx074_video_probe(struct i2c_client *client)
{
+ struct v4l2_subdev *subdev = i2c_get_clientdata(client);
int ret;
u16 id;
+ ret = imx074_s_power(subdev, 1);
+ if (ret < 0)
+ return ret;
+
/* Read sensor Model ID */
ret = reg_read(client, 0);
if (ret < 0)
- return ret;
+ goto done;
id = ret << 8;
ret = reg_read(client, 1);
if (ret < 0)
- return ret;
+ goto done;
id |= ret;
dev_info(&client->dev, "Chip ID 0x%04x detected\n", id);
- if (id != 0x74)
- return -ENODEV;
+ if (id != 0x74) {
+ ret = -ENODEV;
+ goto done;
+ }
/* PLL Setting EXTCLK=24MHz, 22.5times */
reg_write(client, PLL_MULTIPLIER, 0x2D);
reg_write(client, GROUPED_PARAMETER_HOLD, 0x00); /* off */
- return 0;
+ ret = 0;
+
+done:
+ imx074_s_power(subdev, 0);
+ return ret;
}
static int imx074_probe(struct i2c_client *client,
unsigned long flags;
int ret;
+ ret = mt9m001_s_power(&mt9m001->subdev, 1);
+ if (ret < 0)
+ return ret;
+
/* Enable the chip */
data = reg_write(client, MT9M001_CHIP_ENABLE, 1);
dev_dbg(&client->dev, "write: %d\n", data);
default:
dev_err(&client->dev,
"No MT9M001 chip detected, register read %x\n", data);
- return -ENODEV;
+ ret = -ENODEV;
+ goto done;
}
mt9m001->num_fmts = 0;
data == 0x8431 ? "C12STM" : "C12ST");
ret = mt9m001_init(client);
- if (ret < 0)
+ if (ret < 0) {
dev_err(&client->dev, "Failed to initialise the camera\n");
+ goto done;
+ }
/* mt9m001_init() has reset the chip, returning registers to defaults */
- return v4l2_ctrl_handler_setup(&mt9m001->hdl);
+ ret = v4l2_ctrl_handler_setup(&mt9m001->hdl);
+
+done:
+ mt9m001_s_power(&mt9m001->subdev, 0);
+ return ret;
}
static void mt9m001_video_remove(struct soc_camera_link *icl)
return ret;
}
-/*
- * Interface active, can use i2c. If it fails, it can indeed mean, that
- * this wasn't our capture interface, so, we wait for the right one
- */
-static int mt9m111_video_probe(struct i2c_client *client)
-{
- struct mt9m111 *mt9m111 = to_mt9m111(client);
- s32 data;
- int ret;
-
- data = reg_read(CHIP_VERSION);
-
- switch (data) {
- case 0x143a: /* MT9M111 or MT9M131 */
- mt9m111->model = V4L2_IDENT_MT9M111;
- dev_info(&client->dev,
- "Detected a MT9M111/MT9M131 chip ID %x\n", data);
- break;
- case 0x148c: /* MT9M112 */
- mt9m111->model = V4L2_IDENT_MT9M112;
- dev_info(&client->dev, "Detected a MT9M112 chip ID %x\n", data);
- break;
- default:
- dev_err(&client->dev,
- "No MT9M111/MT9M112/MT9M131 chip detected register read %x\n",
- data);
- return -ENODEV;
- }
-
- ret = mt9m111_init(mt9m111);
- if (ret)
- return ret;
- return v4l2_ctrl_handler_setup(&mt9m111->hdl);
-}
-
static int mt9m111_power_on(struct mt9m111 *mt9m111)
{
struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev);
.video = &mt9m111_subdev_video_ops,
};
+/*
+ * Interface active, can use i2c. If it fails, it can indeed mean, that
+ * this wasn't our capture interface, so, we wait for the right one
+ */
+static int mt9m111_video_probe(struct i2c_client *client)
+{
+ struct mt9m111 *mt9m111 = to_mt9m111(client);
+ s32 data;
+ int ret;
+
+ ret = mt9m111_s_power(&mt9m111->subdev, 1);
+ if (ret < 0)
+ return ret;
+
+ data = reg_read(CHIP_VERSION);
+
+ switch (data) {
+ case 0x143a: /* MT9M111 or MT9M131 */
+ mt9m111->model = V4L2_IDENT_MT9M111;
+ dev_info(&client->dev,
+ "Detected a MT9M111/MT9M131 chip ID %x\n", data);
+ break;
+ case 0x148c: /* MT9M112 */
+ mt9m111->model = V4L2_IDENT_MT9M112;
+ dev_info(&client->dev, "Detected a MT9M112 chip ID %x\n", data);
+ break;
+ default:
+ dev_err(&client->dev,
+ "No MT9M111/MT9M112/MT9M131 chip detected register read %x\n",
+ data);
+ ret = -ENODEV;
+ goto done;
+ }
+
+ ret = mt9m111_init(mt9m111);
+ if (ret)
+ goto done;
+
+ ret = v4l2_ctrl_handler_setup(&mt9m111->hdl);
+
+done:
+ mt9m111_s_power(&mt9m111->subdev, 0);
+ return ret;
+}
+
static int mt9m111_probe(struct i2c_client *client,
const struct i2c_device_id *did)
{
return ret >= 0 ? 0 : -EIO;
}
-static int mt9t031_disable(struct i2c_client *client)
-{
- /* Disable the chip */
- reg_clear(client, MT9T031_OUTPUT_CONTROL, 2);
-
- return 0;
-}
-
static int mt9t031_s_stream(struct v4l2_subdev *sd, int enable)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
s32 data;
int ret;
- /* Enable the chip */
- data = reg_write(client, MT9T031_CHIP_ENABLE, 1);
- dev_dbg(&client->dev, "write: %d\n", data);
+ ret = mt9t031_s_power(&mt9t031->subdev, 1);
+ if (ret < 0)
+ return ret;
+
+ ret = mt9t031_idle(client);
+ if (ret < 0) {
+ dev_err(&client->dev, "Failed to initialise the camera\n");
+ goto done;
+ }
/* Read out the chip version register */
data = reg_read(client, MT9T031_CHIP_VERSION);
default:
dev_err(&client->dev,
"No MT9T031 chip detected, register read %x\n", data);
- return -ENODEV;
+ ret = -ENODEV;
+ goto done;
}
dev_info(&client->dev, "Detected a MT9T031 chip ID %x\n", data);
- ret = mt9t031_idle(client);
- if (ret < 0)
- dev_err(&client->dev, "Failed to initialise the camera\n");
- else
- v4l2_ctrl_handler_setup(&mt9t031->hdl);
+ ret = v4l2_ctrl_handler_setup(&mt9t031->hdl);
+
+done:
+ mt9t031_s_power(&mt9t031->subdev, 0);
return ret;
}
mt9t031->xskip = 1;
mt9t031->yskip = 1;
- mt9t031_idle(client);
-
ret = mt9t031_video_probe(client);
-
- mt9t031_disable(client);
-
if (ret) {
v4l2_ctrl_handler_free(&mt9t031->hdl);
kfree(mt9t031);
struct mt9t112_priv *priv = to_mt9t112(client);
const char *devname;
int chipid;
+ int ret;
+
+ ret = mt9t112_s_power(&priv->subdev, 1);
+ if (ret < 0)
+ return ret;
/*
* check and show chip ID
break;
default:
dev_err(&client->dev, "Product ID error %04x\n", chipid);
- return -ENODEV;
+ ret = -ENODEV;
+ goto done;
}
dev_info(&client->dev, "%s chip ID %04x\n", devname, chipid);
- return 0;
+done:
+ mt9t112_s_power(&priv->subdev, 0);
+ return ret;
}
static int mt9t112_probe(struct i2c_client *client,
int ret;
unsigned long flags;
+ ret = mt9v022_s_power(&mt9v022->subdev, 1);
+ if (ret < 0)
+ return ret;
+
/* Read out the chip version register */
data = reg_read(client, MT9V022_CHIP_VERSION);
dev_err(&client->dev, "Failed to initialise the camera\n");
ei2c:
+ mt9v022_s_power(&mt9v022->subdev, 0);
return ret;
}
const char *devname;
int ret;
+ ret = ov2640_s_power(&priv->subdev, 1);
+ if (ret < 0)
+ return ret;
+
/*
* check and show product ID and manufacturer ID
*/
dev_err(&client->dev,
"Product ID error %x:%x\n", pid, ver);
ret = -ENODEV;
- goto err;
+ goto done;
}
dev_info(&client->dev,
"%s Product ID %0x:%0x Manufacturer ID %x:%x\n",
devname, pid, ver, midh, midl);
- return v4l2_ctrl_handler_setup(&priv->hdl);
+ ret = v4l2_ctrl_handler_setup(&priv->hdl);
-err:
+done:
+ ov2640_s_power(&priv->subdev, 0);
return ret;
}
static int ov5642_video_probe(struct i2c_client *client)
{
+ struct v4l2_subdev *subdev = i2c_get_clientdata(client);
int ret;
u8 id_high, id_low;
u16 id;
+ ret = ov5642_s_power(subdev, 1);
+ if (ret < 0)
+ return ret;
+
/* Read sensor Model ID */
ret = reg_read(client, REG_CHIP_ID_HIGH, &id_high);
if (ret < 0)
- return ret;
+ goto done;
id = id_high << 8;
ret = reg_read(client, REG_CHIP_ID_LOW, &id_low);
if (ret < 0)
- return ret;
+ goto done;
id |= id_low;
dev_info(&client->dev, "Chip ID 0x%04x detected\n", id);
- if (id != 0x5642)
- return -ENODEV;
+ if (id != 0x5642) {
+ ret = -ENODEV;
+ goto done;
+ }
- return 0;
+ ret = 0;
+
+done:
+ ov5642_s_power(subdev, 0);
+ return ret;
}
static int ov5642_probe(struct i2c_client *client,
static int ov6650_video_probe(struct i2c_client *client)
{
+ struct ov6650 *priv = to_ov6650(client);
u8 pidh, pidl, midh, midl;
- int ret = 0;
+ int ret;
+
+ ret = ov6650_s_power(&priv->subdev, 1);
+ if (ret < 0)
+ return ret;
/*
* check and show product ID and manufacturer ID
ret = ov6650_reg_read(client, REG_MIDL, &midl);
if (ret)
- return ret;
+ goto done;
if ((pidh != OV6650_PIDH) || (pidl != OV6650_PIDL)) {
dev_err(&client->dev, "Product ID error 0x%02x:0x%02x\n",
pidh, pidl);
- return -ENODEV;
+ ret = -ENODEV;
+ goto done;
}
dev_info(&client->dev,
ret = ov6650_reset(client);
if (!ret)
ret = ov6650_prog_dflt(client);
+ if (!ret)
+ ret = v4l2_ctrl_handler_setup(&priv->hdl);
+done:
+ ov6650_s_power(&priv->subdev, 0);
return ret;
}
priv->colorspace = V4L2_COLORSPACE_JPEG;
ret = ov6650_video_probe(client);
- if (!ret)
- ret = v4l2_ctrl_handler_setup(&priv->hdl);
-
if (ret) {
v4l2_ctrl_handler_free(&priv->hdl);
kfree(priv);
struct ov772x_priv *priv = to_ov772x(client);
u8 pid, ver;
const char *devname;
+ int ret;
+
+ ret = ov772x_s_power(&priv->subdev, 1);
+ if (ret < 0)
+ return ret;
/*
* check and show product ID and manufacturer ID
default:
dev_err(&client->dev,
"Product ID error %x:%x\n", pid, ver);
- return -ENODEV;
+ ret = -ENODEV;
+ goto done;
}
dev_info(&client->dev,
ver,
i2c_smbus_read_byte_data(client, MIDH),
i2c_smbus_read_byte_data(client, MIDL));
- return v4l2_ctrl_handler_setup(&priv->hdl);
+ ret = v4l2_ctrl_handler_setup(&priv->hdl);
+
+done:
+ ov772x_s_power(&priv->subdev, 0);
+ return ret;
}
static const struct v4l2_ctrl_ops ov772x_ctrl_ops = {
struct ov9640_priv *priv = to_ov9640_sensor(sd);
u8 pid, ver, midh, midl;
const char *devname;
- int ret = 0;
+ int ret;
+
+ ret = ov9640_s_power(&priv->subdev, 1);
+ if (ret < 0)
+ return ret;
/*
* check and show product ID and manufacturer ID
if (!ret)
ret = ov9640_reg_read(client, OV9640_MIDL, &midl);
if (ret)
- return ret;
+ goto done;
switch (VERSION(pid, ver)) {
case OV9640_V2:
break;
default:
dev_err(&client->dev, "Product ID error %x:%x\n", pid, ver);
- return -ENODEV;
+ ret = -ENODEV;
+ goto done;
}
dev_info(&client->dev, "%s Product ID %0x:%0x Manufacturer ID %x:%x\n",
devname, pid, ver, midh, midl);
- return v4l2_ctrl_handler_setup(&priv->hdl);
+ ret = v4l2_ctrl_handler_setup(&priv->hdl);
+
+done:
+ ov9640_s_power(&priv->subdev, 0);
+ return ret;
}
static const struct v4l2_ctrl_ops ov9640_ctrl_ops = {
u8 modelhi, modello;
int ret;
+ ret = ov9740_s_power(&priv->subdev, 1);
+ if (ret < 0)
+ return ret;
+
/*
* check and show product ID and manufacturer ID
*/
ret = ov9740_reg_read(client, OV9740_MODEL_ID_HI, &modelhi);
if (ret < 0)
- goto err;
+ goto done;
ret = ov9740_reg_read(client, OV9740_MODEL_ID_LO, &modello);
if (ret < 0)
- goto err;
+ goto done;
priv->model = (modelhi << 8) | modello;
ret = ov9740_reg_read(client, OV9740_REVISION_NUMBER, &priv->revision);
if (ret < 0)
- goto err;
+ goto done;
ret = ov9740_reg_read(client, OV9740_MANUFACTURER_ID, &priv->manid);
if (ret < 0)
- goto err;
+ goto done;
ret = ov9740_reg_read(client, OV9740_SMIA_VERSION, &priv->smiaver);
if (ret < 0)
- goto err;
+ goto done;
if (priv->model != 0x9740) {
ret = -ENODEV;
- goto err;
+ goto done;
}
priv->ident = V4L2_IDENT_OV9740;
"Manufacturer 0x%02x, SMIA Version 0x%02x\n",
priv->model, priv->revision, priv->manid, priv->smiaver);
-err:
+ ret = v4l2_ctrl_handler_setup(&priv->hdl);
+
+done:
+ ov9740_s_power(&priv->subdev, 0);
return ret;
}
}
ret = ov9740_video_probe(client);
- if (!ret)
- ret = v4l2_ctrl_handler_setup(&priv->hdl);
if (ret < 0) {
v4l2_ctrl_handler_free(&priv->hdl);
kfree(priv);
static int rj54n1_video_probe(struct i2c_client *client,
struct rj54n1_pdata *priv)
{
+ struct rj54n1 *rj54n1 = to_rj54n1(client);
int data1, data2;
int ret;
+ ret = rj54n1_s_power(&rj54n1->subdev, 1);
+ if (ret < 0)
+ return ret;
+
/* Read out the chip version register */
data1 = reg_read(client, RJ54N1_DEV_CODE);
data2 = reg_read(client, RJ54N1_DEV_CODE2);
ret = -ENODEV;
dev_info(&client->dev, "No RJ54N1CB0C found, read 0x%x:0x%x\n",
data1, data2);
- goto ei2c;
+ goto done;
}
/* Configure IOCTL polarity from the platform data: 0 or 1 << 7. */
ret = reg_write(client, RJ54N1_IOC, priv->ioctl_high << 7);
if (ret < 0)
- goto ei2c;
+ goto done;
dev_info(&client->dev, "Detected a RJ54N1CB0C chip ID 0x%x:0x%x\n",
data1, data2);
-ei2c:
+ ret = v4l2_ctrl_handler_setup(&rj54n1->hdl);
+
+done:
+ rj54n1_s_power(&rj54n1->subdev, 0);
return ret;
}
if (ret < 0) {
v4l2_ctrl_handler_free(&rj54n1->hdl);
kfree(rj54n1);
- return ret;
}
- return v4l2_ctrl_handler_setup(&rj54n1->hdl);
+
+ return ret;
}
static int rj54n1_remove(struct i2c_client *client)
{
struct tw9910_priv *priv = to_tw9910(client);
s32 id;
+ int ret;
/*
* tw9910 only use 8 or 16 bit bus width
return -ENODEV;
}
+ ret = tw9910_s_power(&priv->subdev, 1);
+ if (ret < 0)
+ return ret;
+
/*
* check and show Product ID
* So far only revisions 0 and 1 have been seen
dev_err(&client->dev,
"Product ID error %x:%x\n",
id, priv->revision);
- return -ENODEV;
+ ret = -ENODEV;
+ goto done;
}
dev_info(&client->dev,
priv->norm = V4L2_STD_NTSC;
- return 0;
+done:
+ tw9910_s_power(&priv->subdev, 0);
+ return ret;
}
static struct v4l2_subdev_core_ops tw9910_subdev_core_ops = {
if (ret < 0)
goto eadd;
- /*
- * This will not yet call v4l2_subdev_core_ops::s_power(1), because the
- * subdevice has not been initialised yet. We'll have to call it once
- * again after initialisation, even though it shouldn't be needed, we
- * don't do any IO here.
- *
- * The device pointer passed to soc_camera_power_on(), and ultimately to
- * the platform callback, should be the subdev physical device. However,
- * we have no way to retrieve a pointer to that device here. This isn't
- * a real issue, as no platform currently uses the device pointer, and
- * this soc_camera_power_on() call will be removed in the next commit.
- */
- ret = soc_camera_power_on(icd->pdev, icl);
- if (ret < 0)
- goto epower;
-
/* Must have icd->vdev before registering the device */
ret = video_dev_create(icd);
if (ret < 0)
ici->ops->remove(icd);
- __soc_camera_power_off(icd);
-
mutex_unlock(&icd->video_lock);
return 0;
video_device_release(icd->vdev);
icd->vdev = NULL;
evdc:
- __soc_camera_power_off(icd);
-epower:
ici->ops->remove(icd);
eadd:
regulator_bulk_free(icl->num_regulators, icl->regulators);
projects / profile / ivi / kernel-x86-ivi.git / commitdiff