cmd: mvebu/bubt: Correctly propagate failure during tftp transport

net_loop() returns signed int type and negative value represents error.
tftp_read_file() returns unsigned size_t type and zero value represents
error. Casting signed negative value to unsigned size_t type cause losing
information about error and bubt thinks that no error happened, and
continue erasing SPI-NOR which cause malfunction device.

Fix this issue by correctly propagating failure during tftp transport.

With this change when there is no eth link, bubt does not erase SPI-NOR
anymore.

  => bubt
  Burning U-Boot image "flash-image.bin" from "tftp" to "spi"
  ethernet@30000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
  ethernet@30000: No link.
  Error: Failed to read file flash-image.bin from tftp

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>

diff --git a/cmd/mvebu/bubt.c b/cmd/mvebu/bubt.c
index a05e22a..2924b15 100644 (file)
--- a/cmd/mvebu/bubt.c
+++ b/cmd/mvebu/bubt.c
@@ -455,11 +455,14 @@ static int is_usb_active(void)
 #ifdef CONFIG_CMD_NET
 static size_t tftp_read_file(const char *file_name)
 {
+       int ret;
+
        /*
         * update global variable image_load_addr before tftp file from network
         */
        image_load_addr = get_load_addr();
-       return net_loop(TFTPGET);
+       ret = net_loop(TFTPGET);
+       return ret > 0 ? ret : 0;
 }
 
 static int is_tftp_active(void)