-If you read this file _as_is_, just ignore the funny characters you
-see. It is written in the POD format (see perlpod manpage) which is
-specially designed to be readable as is.
-
-=head1 NAME
-
-perldos - Perl under DOS, W31, W95.
-
-=head1 SYNOPSIS
-
-These are instructions for building Perl under DOS (or w??), using
-DJGPP v2.01 or later. Under w95 long filenames are supported.
-
-=head1 DESCRIPTION
-
-Before you start, you should glance through the README file
-found in the top-level directory where the Perl distribution
-was extracted. Make sure you read and understand the terms under
-which this software is being distributed.
-
-This port currently supports MakeMaker (the set of modules that
-is used to build extensions to perl). Therefore, you should be
-able to build and install most extensions found in the CPAN sites.
-
-=head2 Prerequisites
-
-=over 4
-
-=item DJGPP
-
-DJGPP is a port of GNU C/C++ compiler and development tools to 32-bit,
-protected-mode environment on Intel 32-bit CPUs running MS-DOS and compatible
-operating systems, by DJ Delorie <dj@delorie.com> and friends.
-
-For more details (FAQ), check out the home of DJGPP at:
-
- http://www.delorie.com/djgpp/
-
-If you have questions about DJGPP, try posting to the DJGPP newsgroup:
-comp.os.msdos.djgpp, or use the email gateway djgpp@delorie.com.
-
-You can find the full DJGPP distribution on any SimTel.Net mirror all over
-the world. Like:
-
- ftp://ftp.simtel.net/pub/simtelnet/gnu/djgpp/v2*
-
-You need the following files to build perl (or add new modules):
-
- v2/djdev202.zip
- v2/bnu27b.zip
- v2gnu/gcc2721b.zip
- v2gnu/bsh1147b.zip
- v2gnu/mak3761b.zip
- v2gnu/fil316b.zip
- v2gnu/sed118b.zip
- v2gnu/txt122b.zip
- v2gnu/dif271b.zip
- v2gnu/grep21b.zip
- v2gnu/shl112b.zip
- v2gnu/gawk303b.zip
- v2misc/csdpmi4b.zip
-
-or possibly any newer version.
-
-=item Pthreads
-
-Thread support is not tested in this version of the djgpp perl.
-
-=back
-
-=head2 Shortcomings of Perl under DOS
-
-Perl under DOS lacks some features of perl under UNIX because of
-deficiencies in the UNIX-emulation, most notably:
-
-=over 4
-
-=item *
-
-fork() and pipe()
-
-=item *
-
-some features of the UNIX filesystem regarding link count and file dates
-
-=item *
-
-in-place operation is a little bit broken with short filenames
-
-=item *
-
-sockets
-
-=back
-
-=head2 Building
-
-=over 4
-
-=item *
-
-Unpack the source package F<perl5.6*.tar.gz> with djtarx. If you want
-to use long file names under w95 and also to get Perl to pass all its
-tests, don't forget to use
-
- set LFN=y
- set FNCASE=y
-
-before unpacking the archive.
-
-=item *
-
-Create a "symlink" or copy your bash.exe to sh.exe in your C<($DJDIR)/bin>
-directory.
-
- ln -s bash.exe sh.exe
-
-And make the C<SHELL> environment variable point to this F<sh.exe>:
-
- set SHELL=c:/djgpp/bin/sh.exe (use full path name!)
-
-You can do this in F<djgpp.env> too. Add this line BEFORE any section
-definition:
-
- +SHELL=%DJDIR%/bin/sh.exe
-
-=item *
-
-If you have F<split.exe> and F<gsplit.exe> in your path, then rename
-F<split.exe> to F<djsplit.exe>, and F<gsplit.exe> to F<split.exe>.
-Copy or link F<gecho.exe> to F<echo.exe> if you don't have F<echo.exe>.
-Copy or link F<gawk.exe> to F<awk.exe> if you don't have F<awk.exe>.
-
-=item *
-
-Chdir to the djgpp subdirectory of perl toplevel and type the following
-command:
-
- configure.bat
-
-This will do some preprocessing then run the Configure script for you.
-The Configure script is interactive, but in most cases you
-just need to press ENTER.
-
-If the script says that your package is incomplete, and asks whether
-to continue, just answer with Y (this can only happen if you don't use
-long filenames).
-
-When Configure asks about the extensions, I suggest IO and Fcntl,
-and if you want database handling then SDBM_File or GDBM_File
-(you need to install gdbm for this one). If you want to use the
-POSIX extension (this is the default), make sure that the stack
-size of your F<cc1.exe> is at least 512kbyte (you can check this
-with: C<stubedit cc1.exe>).
-
-You can use the Configure script in non-interactive mode too.
-When I built my F<perl.exe>, I used something like this:
-
- configure.bat -des
-
-You can find more info about Configure's command line switches in
-the F<INSTALL> file.
-
-When the script ends, and you want to change some values in the
-generated F<config.sh> file, then run
-
- sh Configure -S
-
-after you made your modifications.
-
-IMPORTANT: if you use this C<-S> switch, be sure to delete the CONFIG
-environment variable before running the script:
-
- set CONFIG=
-
-=item *
-
-Now you can compile Perl. Type:
-
- make
-
-=back
-
-=head2 Testing
-
-Type:
-
- make test
-
-If you're lucky you should see "All tests successful". But there can be
-a few failed subtests (less than 5 hopefully) depending on some external
-conditions (e.g. some subtests fail under linux/dosemu or plain dos
-with short filenames only).
-
-=head2 Installation
-
-Type:
-
- make install
-
-This will copy the newly compiled perl and libraries into your DJGPP
-directory structure. Perl.exe and the utilities go into C<($DJDIR)/bin>,
-and the library goes under C<($DJDIR)/lib/perl5>. The pod documentation
-goes under C<($DJDIR)/lib/perl5/pod>.
-
-=head1 AUTHOR
-
-Laszlo Molnar, F<laszlo.molnar@eth.ericsson.se>
-
-=head1 SEE ALSO
-
-perl(1).
-
-=cut
-
+If you read this file _as_is_, just ignore the funny characters you\r
+see. It is written in the POD format (see perlpod manpage) which is\r
+specially designed to be readable as is.\r
+\r
+=head1 NAME\r
+\r
+perldos - Perl under DOS, W31, W95.\r
+\r
+=head1 SYNOPSIS\r
+\r
+These are instructions for building Perl under DOS (or w??), using\r
+DJGPP v2.01 or later. Under w95 long filenames are supported.\r
+\r
+=head1 DESCRIPTION\r
+\r
+Before you start, you should glance through the README file\r
+found in the top-level directory where the Perl distribution\r
+was extracted. Make sure you read and understand the terms under\r
+which this software is being distributed.\r
+\r
+This port currently supports MakeMaker (the set of modules that\r
+is used to build extensions to perl). Therefore, you should be\r
+able to build and install most extensions found in the CPAN sites.\r
+\r
+=head2 Prerequisites\r
+\r
+=over 4\r
+\r
+=item DJGPP\r
+\r
+DJGPP is a port of GNU C/C++ compiler and development tools to 32-bit,\r
+protected-mode environment on Intel 32-bit CPUs running MS-DOS and compatible\r
+operating systems, by DJ Delorie <dj@delorie.com> and friends.\r
+\r
+For more details (FAQ), check out the home of DJGPP at:\r
+\r
+ http://www.delorie.com/djgpp/\r
+\r
+If you have questions about DJGPP, try posting to the DJGPP newsgroup:\r
+comp.os.msdos.djgpp, or use the email gateway djgpp@delorie.com.\r
+\r
+You can find the full DJGPP distribution on any SimTel.Net mirror all over\r
+the world. Like:\r
+\r
+ ftp://ftp.simtel.net/pub/simtelnet/gnu/djgpp/v2*\r
+\r
+You need the following files to build perl (or add new modules):\r
+\r
+ v2/djdev202.zip\r
+ v2/bnu27b.zip\r
+ v2gnu/gcc2721b.zip\r
+ v2gnu/bsh1147b.zip\r
+ v2gnu/mak3761b.zip\r
+ v2gnu/fil316b.zip\r
+ v2gnu/sed118b.zip\r
+ v2gnu/txt122b.zip\r
+ v2gnu/dif271b.zip\r
+ v2gnu/grep21b.zip\r
+ v2gnu/shl112b.zip\r
+ v2gnu/gawk303b.zip\r
+ v2misc/csdpmi4b.zip \r
+\r
+or possibly any newer version.\r
+\r
+=item Pthreads\r
+\r
+Thread support is not tested in this version of the djgpp perl.\r
+\r
+=back\r
+\r
+=head2 Shortcomings of Perl under DOS\r
+\r
+Perl under DOS lacks some features of perl under UNIX because of\r
+deficiencies in the UNIX-emulation, most notably:\r
+\r
+=over 4\r
+\r
+=item *\r
+\r
+fork() and pipe()\r
+\r
+=item *\r
+\r
+some features of the UNIX filesystem regarding link count and file dates\r
+\r
+=item *\r
+\r
+in-place operation is a little bit broken with short filenames\r
+\r
+=item *\r
+\r
+sockets\r
+\r
+=back\r
+\r
+=head2 Building\r
+\r
+=over 4\r
+\r
+=item *\r
+\r
+Unpack the source package F<perl5.6*.tar.gz> with djtarx. If you want\r
+to use long file names under w95 and also to get Perl to pass all its\r
+tests, don't forget to use\r
+\r
+ set LFN=y\r
+ set FNCASE=y\r
+\r
+before unpacking the archive.\r
+\r
+=item *\r
+\r
+Create a "symlink" or copy your bash.exe to sh.exe in your C<($DJDIR)/bin>\r
+directory.\r
+\r
+ ln -s bash.exe sh.exe\r
+\r
+And make the C<SHELL> environment variable point to this F<sh.exe>:\r
+\r
+ set SHELL=c:/djgpp/bin/sh.exe (use full path name!)\r
+\r
+You can do this in F<djgpp.env> too. Add this line BEFORE any section\r
+definition:\r
+\r
+ +SHELL=%DJDIR%/bin/sh.exe\r
+\r
+=item *\r
+\r
+If you have F<split.exe> and F<gsplit.exe> in your path, then rename \r
+F<split.exe> to F<djsplit.exe>, and F<gsplit.exe> to F<split.exe>.\r
+Copy or link F<gecho.exe> to F<echo.exe> if you don't have F<echo.exe>.\r
+Copy or link F<gawk.exe> to F<awk.exe> if you don't have F<awk.exe>.\r
+\r
+=item *\r
+\r
+Chdir to the djgpp subdirectory of perl toplevel and type the following\r
+command:\r
+\r
+ configure.bat\r
+\r
+This will do some preprocessing then run the Configure script for you.\r
+The Configure script is interactive, but in most cases you\r
+just need to press ENTER.\r
+\r
+If the script says that your package is incomplete, and asks whether\r
+to continue, just answer with Y (this can only happen if you don't use\r
+long filenames).\r
+\r
+When Configure asks about the extensions, I suggest IO and Fcntl,\r
+and if you want database handling then SDBM_File or GDBM_File\r
+(you need to install gdbm for this one). If you want to use the\r
+POSIX extension (this is the default), make sure that the stack\r
+size of your F<cc1.exe> is at least 512kbyte (you can check this\r
+with: C<stubedit cc1.exe>).\r
+\r
+You can use the Configure script in non-interactive mode too.\r
+When I built my F<perl.exe>, I used something like this:\r
+\r
+ configure.bat -des\r
+\r
+You can find more info about Configure's command line switches in\r
+the F<INSTALL> file.\r
+\r
+When the script ends, and you want to change some values in the\r
+generated F<config.sh> file, then run\r
+\r
+ sh Configure -S\r
+\r
+after you made your modifications.\r
+\r
+IMPORTANT: if you use this C<-S> switch, be sure to delete the CONFIG\r
+environment variable before running the script:\r
+\r
+ set CONFIG=\r
+\r
+=item *\r
+\r
+Now you can compile Perl. Type:\r
+\r
+ make\r
+\r
+=back\r
+\r
+=head2 Testing\r
+\r
+Type:\r
+\r
+ make test\r
+\r
+If you're lucky you should see "All tests successful". But there can be\r
+a few failed subtests (less than 5 hopefully) depending on some external\r
+conditions (e.g. some subtests fail under linux/dosemu or plain dos\r
+with short filenames only).\r
+\r
+=head2 Installation\r
+\r
+Type:\r
+\r
+ make install\r
+\r
+This will copy the newly compiled perl and libraries into your DJGPP\r
+directory structure. Perl.exe and the utilities go into C<($DJDIR)/bin>,\r
+and the library goes under C<($DJDIR)/lib/perl5>. The pod documentation\r
+goes under C<($DJDIR)/lib/perl5/pod>.\r
+\r
+=head1 AUTHOR\r
+\r
+Laszlo Molnar, F<laszlo.molnar@eth.ericsson.se>\r
+\r
+=head1 SEE ALSO\r
+\r
+perl(1).\r
+\r
+=cut\r
+\r
-If you read this file _as_is_, just ignore the funny characters you
-see. It is written in the POD format (see pod/perlpod.pod) which is
-specially designed to be readable as is.
-
-=head1 NAME
-
-perlwin32 - Perl under Win32
-
-=head1 SYNOPSIS
-
-These are instructions for building Perl under Windows (9x, NT and
-2000).
-
-=head1 DESCRIPTION
-
-Before you start, you should glance through the README file
-found in the top-level directory where the Perl distribution
-was extracted. Make sure you read and understand the terms under
-which this software is being distributed.
-
-Also make sure you read L<BUGS AND CAVEATS> below for the
-known limitations of this port.
-
-The INSTALL file in the perl top-level has much information that is
-only relevant to people building Perl on Unix-like systems. In
-particular, you can safely ignore any information that talks about
-"Configure".
-
-You may also want to look at two other options for building
-a perl that will work on Windows NT: the README.cygwin and
-README.os2 files, which each give a different set of rules to build
-a Perl that will work on Win32 platforms. Those two methods will
-probably enable you to build a more Unix-compatible perl, but you
-will also need to download and use various other build-time and
-run-time support software described in those files.
-
-This set of instructions is meant to describe a so-called "native"
-port of Perl to Win32 platforms. The resulting Perl requires no
-additional software to run (other than what came with your operating
-system). Currently, this port is capable of using one of the
-following compilers:
-
- Borland C++ version 5.02 or later
- Microsoft Visual C++ version 4.2 or later
- Mingw32 with GCC version 2.95.2 or better
-
-The last of these is a high quality freeware compiler. Support
-for it is still experimental. (Older versions of GCC are known
-not to work.)
-
-This port currently supports MakeMaker (the set of modules that
-is used to build extensions to perl). Therefore, you should be
-able to build and install most extensions found in the CPAN sites.
-See L<Usage Hints> below for general hints about this.
-
-=head2 Setting Up
-
-=over 4
-
-=item Make
-
-You need a "make" program to build the sources. If you are using
-Visual C++ under Windows NT or 2000, nmake will work. All other
-builds need dmake.
-
-dmake is a freely available make that has very nice macro features
-and parallelability.
-
-A port of dmake for Windows is available from:
-
- http://www.cpan.org/authors/id/GSAR/dmake-4.1pl1-win32.zip
-
-(This is a fixed version of original dmake sources obtained from
-http://www.wticorp.com/dmake/. As of version 4.1PL1, the original
-sources did not build as shipped, and had various other problems.
-A patch is included in the above fixed version.)
-
-Fetch and install dmake somewhere on your path (follow the instructions
-in the README.NOW file).
-
-=item Command Shell
-
-Use the default "cmd" shell that comes with NT. Some versions of the
-popular 4DOS/NT shell have incompatibilities that may cause you trouble.
-If the build fails under that shell, try building again with the cmd
-shell.
-
-The nmake Makefile also has known incompatibilities with the
-"command.com" shell that comes with Windows 9x. You will need to
-use dmake and makefile.mk to build under Windows 9x.
-
-The surest way to build it is on Windows NT, using the cmd shell.
-
-Make sure the path to the build directory does not contain spaces. The
-build usually works in this circumstance, but some tests will fail.
-
-=item Borland C++
-
-If you are using the Borland compiler, you will need dmake.
-(The make that Borland supplies is seriously crippled, and will not
-work for MakeMaker builds.)
-
-See L/"Make"> above.
-
-=item Microsoft Visual C++
-
-The nmake that comes with Visual C++ will suffice for building.
-You will need to run the VCVARS32.BAT file usually found somewhere
-like C:\MSDEV4.2\BIN. This will set your build environment.
-
-You can also use dmake to build using Visual C++, provided:
-you set OSRELEASE to "microsft" (or whatever the directory name
-under which the Visual C dmake configuration lives) in your environment,
-and edit win32/config.vc to change "make=nmake" into "make=dmake". The
-latter step is only essential if you want to use dmake as your default
-make for building extensions using MakeMaker.
-
-=item Mingw32 with GCC
-
-GCC-2.95.2 binaries can be downloaded from:
-
- ftp://ftp.xraylith.wisc.edu/pub/khan/gnu-win32/mingw32/
-
-The GCC-2.95.2 bundle comes with Mingw32 libraries and headers.
-
-Make sure you install the binaries that work with MSVCRT.DLL as indicated
-in the README for the GCC bundle. You may need to set up a few environment
-variables (usually run from a batch file).
-
-The version of gcc-2.95.2-msvcrt.exe released 7 November 1999 left out
-a fix for certain command line quotes, so be sure to download and install
-fixes/quote-fix-msvcrt.exe too.
-
-You also need dmake. See L</"Make"> above on how to get it.
-
-=back
-
-=head2 Building
-
-=over 4
-
-=item *
-
-Make sure you are in the "win32" subdirectory under the perl toplevel.
-This directory contains a "Makefile" that will work with
-versions of nmake that come with Visual C++, and a dmake "makefile.mk"
-that will work for all supported compilers. The defaults in the dmake
-makefile are setup to build using the GCC compiler.
-
-=item *
-
-Edit the makefile.mk (or Makefile, if using nmake) and change the values
-of INST_DRV and INST_TOP. You can also enable various build
-flags. These are explained in the makefiles.
-
-You will have to make sure CCTYPE is set correctly, and CCHOME points
-to wherever you installed your compiler.
-
-The default value for CCHOME in the makefiles for Visual C++
-may not be correct for some versions. Make sure the default exists
-and is valid.
-
-If you have either the source or a library that contains des_fcrypt(),
-enable the appropriate option in the makefile. des_fcrypt() is not
-bundled with the distribution due to US Government restrictions
-on the export of cryptographic software. Nevertheless, this routine
-is part of the "libdes" library (written by Eric Young) which is widely
-available worldwide, usually along with SSLeay (for example:
-"ftp://fractal.mta.ca/pub/crypto/SSLeay/DES/"). Set CRYPT_SRC to the
-name of the file that implements des_fcrypt(). Alternatively, if
-you have built a library that contains des_fcrypt(), you can set
-CRYPT_LIB to point to the library name. The location above contains
-many versions of the "libdes" library, all with slightly different
-implementations of des_fcrypt(). Older versions have a single,
-self-contained file (fcrypt.c) that implements crypt(), so they may be
-easier to use. A patch against the fcrypt.c found in libdes-3.06 is
-in des_fcrypt.patch.
-
-Perl will also build without des_fcrypt(), but the crypt() builtin will
-fail at run time.
-
-Be sure to read the instructions near the top of the makefiles carefully.
-
-=item *
-
-Type "dmake" (or "nmake" if you are using that make).
-
-This should build everything. Specifically, it will create perl.exe,
-perl56.dll at the perl toplevel, and various other extension dll's
-under the lib\auto directory. If the build fails for any reason, make
-sure you have done the previous steps correctly.
-
-=back
-
-=head2 Testing
-
-Type "dmake test" (or "nmake test"). This will run most of the tests from
-the testsuite (many tests will be skipped).
-
-There should be no test failures when running under Windows NT 4.0 or
-Windows 2000. Many tests I<will> fail under Windows 9x due to the inferior
-command shell.
-
-Some test failures may occur if you use a command shell other than the
-native "cmd.exe", or if you are building from a path that contains
-spaces. So don't do that.
-
-If you are running the tests from a emacs shell window, you may see
-failures in op/stat.t. Run "dmake test-notty" in that case.
-
-If you're using the Borland compiler, you may see a failure in op/taint.t
-arising from the inability to find the Borland Runtime DLLs on the system
-default path. You will need to copy the DLLs reported by the messages
-from where Borland chose to install it, into the Windows system directory
-(usually somewhere like C:\WINNT\SYSTEM32), and rerun the test.
-
-Please report any other failures as described under L<BUGS AND CAVEATS>.
-
-=head2 Installation
-
-Type "dmake install" (or "nmake install"). This will put the newly
-built perl and the libraries under whatever C<INST_TOP> points to in the
-Makefile. It will also install the pod documentation under
-C<$INST_TOP\$VERSION\lib\pod> and HTML versions of the same under
-C<$INST_TOP\$VERSION\lib\pod\html>. To use the Perl you just installed,
-you will need to add two components to your PATH environment variable,
-C<$INST_TOP\$VERSION\bin>, and C<$INST_TOP\$VERSION\bin\$ARCHNAME>.
-For example:
-
- set PATH c:\perl\5.6.0\bin;c:\perl\5.6.0\bin\MSWin32-x86;%PATH%
-
-If you opt to comment out INST_VER and INST_ARCH in the makefiles, the
-installation structure is much simpler. In that case, it will be
-sufficient to add a single entry to the path, for instance:
-
- set PATH c:\perl\bin;%PATH%
-
-=head2 Usage Hints
-
-=over 4
-
-=item Environment Variables
-
-The installation paths that you set during the build get compiled
-into perl, so you don't have to do anything additional to start
-using that perl (except add its location to your PATH variable).
-
-If you put extensions in unusual places, you can set PERL5LIB
-to a list of paths separated by semicolons where you want perl
-to look for libraries. Look for descriptions of other environment
-variables you can set in L<perlrun>.
-
-You can also control the shell that perl uses to run system() and
-backtick commands via PERL5SHELL. See L<perlrun>.
-
-Perl does not depend on the registry, but it can look up certain default
-values if you choose to put them there. Perl attempts to read entries from
-C<HKEY_CURRENT_USER\Software\Perl> and C<HKEY_LOCAL_MACHINE\Software\Perl>.
-Entries in the former override entries in the latter. One or more of the
-following entries (of type REG_SZ or REG_EXPAND_SZ) may be set:
-
- lib-$] version-specific standard library path to add to @INC
- lib standard library path to add to @INC
- sitelib-$] version-specific site library path to add to @INC
- sitelib site library path to add to @INC
- vendorlib-$] version-specific vendor library path to add to @INC
- vendorlib vendor library path to add to @INC
- PERL* fallback for all %ENV lookups that begin with "PERL"
-
-Note the C<$]> in the above is not literal. Substitute whatever version
-of perl you want to honor that entry, e.g. C<5.6.0>. Paths must be
-separated with semicolons, as usual on win32.
-
-=item File Globbing
-
-By default, perl handles file globbing using the File::Glob extension,
-which provides portable globbing.
-
-If you want perl to use globbing that emulates the quirks of DOS
-filename conventions, you might want to consider using File::DosGlob
-to override the internal glob() implementation. See L<File::DosGlob> for
-details.
-
-=item Using perl from the command line
-
-If you are accustomed to using perl from various command-line
-shells found in UNIX environments, you will be less than pleased
-with what Windows offers by way of a command shell.
-
-The crucial thing to understand about the Windows environment is that
-the command line you type in is processed twice before Perl sees it.
-First, your command shell (usually CMD.EXE on Windows NT, and
-COMMAND.COM on Windows 9x) preprocesses the command line, to handle
-redirection, environment variable expansion, and location of the
-executable to run. Then, the perl executable splits the remaining
-command line into individual arguments, using the C runtime library
-upon which Perl was built.
-
-It is particularly important to note that neither the shell nor the C
-runtime do any wildcard expansions of command-line arguments (so
-wildcards need not be quoted). Also, the quoting behaviours of the
-shell and the C runtime are rudimentary at best (and may, if you are
-using a non-standard shell, be inconsistent). The only (useful) quote
-character is the double quote ("). It can be used to protect spaces in
-arguments and other special characters. The Windows NT documentation
-has almost no description of how the quoting rules are implemented, but
-here are some general observations based on experiments: The C runtime
-breaks arguments at spaces and passes them to programs in argc/argv.
-Doublequotes can be used to prevent arguments with spaces in them from
-being split up. You can put a double quote in an argument by escaping
-it with a backslash and enclosing the whole argument within double
-quotes. The backslash and the pair of double quotes surrounding the
-argument will be stripped by the C runtime.
-
-The file redirection characters "<", ">", and "|" can be quoted by
-double quotes (although there are suggestions that this may not always
-be true). Single quotes are not treated as quotes by the shell or the C
-runtime. The caret "^" has also been observed to behave as a quoting
-character, but this appears to be a shell feature, and the caret is not
-stripped from the command line, so Perl still sees it (and the C runtime
-phase does not treat the caret as a quote character).
-
-Here are some examples of usage of the "cmd" shell:
-
-This prints two doublequotes:
-
- perl -e "print '\"\"' "
-
-This does the same:
-
- perl -e "print \"\\\"\\\"\" "
-
-This prints "bar" and writes "foo" to the file "blurch":
-
- perl -e "print 'foo'; print STDERR 'bar'" > blurch
-
-This prints "foo" ("bar" disappears into nowhereland):
-
- perl -e "print 'foo'; print STDERR 'bar'" 2> nul
-
-This prints "bar" and writes "foo" into the file "blurch":
-
- perl -e "print 'foo'; print STDERR 'bar'" 1> blurch
-
-This pipes "foo" to the "less" pager and prints "bar" on the console:
-
- perl -e "print 'foo'; print STDERR 'bar'" | less
-
-This pipes "foo\nbar\n" to the less pager:
-
- perl -le "print 'foo'; print STDERR 'bar'" 2>&1 | less
-
-This pipes "foo" to the pager and writes "bar" in the file "blurch":
-
- perl -e "print 'foo'; print STDERR 'bar'" 2> blurch | less
-
-
-Discovering the usefulness of the "command.com" shell on Windows 9x
-is left as an exercise to the reader :)
-
-One particularly pernicious problem with the 4NT command shell for
-Windows NT is that it (nearly) always treats a % character as indicating
-that environment variable expansion is needed. Under this shell, it is
-therefore important to always double any % characters which you want
-Perl to see (for example, for hash variables), even when they are
-quoted.
-
-=item Building Extensions
-
-The Comprehensive Perl Archive Network (CPAN) offers a wealth
-of extensions, some of which require a C compiler to build.
-Look in http://www.cpan.org/ for more information on CPAN.
-
-Note that not all of the extensions available from CPAN may work
-in the Win32 environment; you should check the information at
-http://testers.cpan.org/ before investing too much effort into
-porting modules that don't readily build.
-
-Most extensions (whether they require a C compiler or not) can
-be built, tested and installed with the standard mantra:
-
- perl Makefile.PL
- $MAKE
- $MAKE test
- $MAKE install
-
-where $MAKE is whatever 'make' program you have configured perl to
-use. Use "perl -V:make" to find out what this is. Some extensions
-may not provide a testsuite (so "$MAKE test" may not do anything, or
-fail), but most serious ones do.
-
-It is important that you use a supported 'make' program, and
-ensure Config.pm knows about it. If you don't have nmake, you can
-either get dmake from the location mentioned earlier, or get an
-old version of nmake reportedly available from:
-
- ftp://ftp.microsoft.com/Softlib/MSLFILES/nmake15.exe
-
-Another option is to use the make written in Perl, available from
-CPAN:
-
- http://www.cpan.org/authors/id/NI-S/Make-0.03.tar.gz
-
-You may also use dmake. See L</"Make"> above on how to get it.
-
-Note that MakeMaker actually emits makefiles with different syntax
-depending on what 'make' it thinks you are using. Therefore, it is
-important that one of the following values appears in Config.pm:
-
- make='nmake' # MakeMaker emits nmake syntax
- make='dmake' # MakeMaker emits dmake syntax
- any other value # MakeMaker emits generic make syntax
- (e.g GNU make, or Perl make)
-
-If the value doesn't match the 'make' program you want to use,
-edit Config.pm to fix it.
-
-If a module implements XSUBs, you will need one of the supported
-C compilers. You must make sure you have set up the environment for
-the compiler for command-line compilation.
-
-If a module does not build for some reason, look carefully for
-why it failed, and report problems to the module author. If
-it looks like the extension building support is at fault, report
-that with full details of how the build failed using the perlbug
-utility.
-
-=item Command-line Wildcard Expansion
-
-The default command shells on DOS descendant operating systems (such
-as they are) usually do not expand wildcard arguments supplied to
-programs. They consider it the application's job to handle that.
-This is commonly achieved by linking the application (in our case,
-perl) with startup code that the C runtime libraries usually provide.
-However, doing that results in incompatible perl versions (since the
-behavior of the argv expansion code differs depending on the
-compiler, and it is even buggy on some compilers). Besides, it may
-be a source of frustration if you use such a perl binary with an
-alternate shell that *does* expand wildcards.
-
-Instead, the following solution works rather well. The nice things
-about it: 1) you can start using it right away 2) it is more powerful,
-because it will do the right thing with a pattern like */*/*.c
-3) you can decide whether you do/don't want to use it 4) you can
-extend the method to add any customizations (or even entirely
-different kinds of wildcard expansion).
-
- C:\> copy con c:\perl\lib\Wild.pm
- # Wild.pm - emulate shell @ARGV expansion on shells that don't
- use File::DosGlob;
- @ARGV = map {
- my @g = File::DosGlob::glob($_) if /[*?]/;
- @g ? @g : $_;
- } @ARGV;
- 1;
- ^Z
- C:\> set PERL5OPT=-MWild
- C:\> perl -le "for (@ARGV) { print }" */*/perl*.c
- p4view/perl/perl.c
- p4view/perl/perlio.c
- p4view/perl/perly.c
- perl5.005/win32/perlglob.c
- perl5.005/win32/perllib.c
- perl5.005/win32/perlglob.c
- perl5.005/win32/perllib.c
- perl5.005/win32/perlglob.c
- perl5.005/win32/perllib.c
-
-Note there are two distinct steps there: 1) You'll have to create
-Wild.pm and put it in your perl lib directory. 2) You'll need to
-set the PERL5OPT environment variable. If you want argv expansion
-to be the default, just set PERL5OPT in your default startup
-environment.
-
-If you are using the Visual C compiler, you can get the C runtime's
-command line wildcard expansion built into perl binary. The resulting
-binary will always expand unquoted command lines, which may not be
-what you want if you use a shell that does that for you. The expansion
-done is also somewhat less powerful than the approach suggested above.
-
-=item Win32 Specific Extensions
-
-A number of extensions specific to the Win32 platform are available
-from CPAN. You may find that many of these extensions are meant to
-be used under the Activeware port of Perl, which used to be the only
-native port for the Win32 platform. Since the Activeware port does not
-have adequate support for Perl's extension building tools, these
-extensions typically do not support those tools either, and therefore
-cannot be built using the generic steps shown in the previous section.
-
-To ensure smooth transitioning of existing code that uses the
-ActiveState port, there is a bundle of Win32 extensions that contains
-all of the ActiveState extensions and most other Win32 extensions from
-CPAN in source form, along with many added bugfixes, and with MakeMaker
-support. This bundle is available at:
-
- http://www.cpan.org/authors/id/GSAR/libwin32-0.151.zip
-
-See the README in that distribution for building and installation
-instructions. Look for later versions that may be available at the
-same location.
-
-=item Running Perl Scripts
-
-Perl scripts on UNIX use the "#!" (a.k.a "shebang") line to
-indicate to the OS that it should execute the file using perl.
-Win32 has no comparable means to indicate arbitrary files are
-executables.
-
-Instead, all available methods to execute plain text files on
-Win32 rely on the file "extension". There are three methods
-to use this to execute perl scripts:
-
-=over 8
-
-=item 1
-
-There is a facility called "file extension associations" that will
-work in Windows NT 4.0. This can be manipulated via the two
-commands "assoc" and "ftype" that come standard with Windows NT
-4.0. Type "ftype /?" for a complete example of how to set this
-up for perl scripts (Say what? You thought Windows NT wasn't
-perl-ready? :).
-
-=item 2
-
-Since file associations don't work everywhere, and there are
-reportedly bugs with file associations where it does work, the
-old method of wrapping the perl script to make it look like a
-regular batch file to the OS, may be used. The install process
-makes available the "pl2bat.bat" script which can be used to wrap
-perl scripts into batch files. For example:
-
- pl2bat foo.pl
-
-will create the file "FOO.BAT". Note "pl2bat" strips any
-.pl suffix and adds a .bat suffix to the generated file.
-
-If you use the 4DOS/NT or similar command shell, note that
-"pl2bat" uses the "%*" variable in the generated batch file to
-refer to all the command line arguments, so you may need to make
-sure that construct works in batch files. As of this writing,
-4DOS/NT users will need a "ParameterChar = *" statement in their
-4NT.INI file, or will need to execute "setdos /p*" in the 4DOS/NT
-startup file to enable this to work.
-
-=item 3
-
-Using "pl2bat" has a few problems: the file name gets changed,
-so scripts that rely on C<$0> to find what they must do may not
-run properly; running "pl2bat" replicates the contents of the
-original script, and so this process can be maintenance intensive
-if the originals get updated often. A different approach that
-avoids both problems is possible.
-
-A script called "runperl.bat" is available that can be copied
-to any filename (along with the .bat suffix). For example,
-if you call it "foo.bat", it will run the file "foo" when it is
-executed. Since you can run batch files on Win32 platforms simply
-by typing the name (without the extension), this effectively
-runs the file "foo", when you type either "foo" or "foo.bat".
-With this method, "foo.bat" can even be in a different location
-than the file "foo", as long as "foo" is available somewhere on
-the PATH. If your scripts are on a filesystem that allows symbolic
-links, you can even avoid copying "runperl.bat".
-
-Here's a diversion: copy "runperl.bat" to "runperl", and type
-"runperl". Explain the observed behavior, or lack thereof. :)
-Hint: .gnidnats llits er'uoy fi ,"lrepnur" eteled :tniH
-
-=back
-
-=item Miscellaneous Things
-
-A full set of HTML documentation is installed, so you should be
-able to use it if you have a web browser installed on your
-system.
-
-C<perldoc> is also a useful tool for browsing information contained
-in the documentation, especially in conjunction with a pager
-like C<less> (recent versions of which have Win32 support). You may
-have to set the PAGER environment variable to use a specific pager.
-"perldoc -f foo" will print information about the perl operator
-"foo".
-
-If you find bugs in perl, you can run C<perlbug> to create a
-bug report (you may have to send it manually if C<perlbug> cannot
-find a mailer on your system).
-
-=back
-
-=head1 BUGS AND CAVEATS
-
-Some of the built-in functions do not act exactly as documented in
-L<perlfunc>, and a few are not implemented at all. To avoid
-surprises, particularly if you have had prior exposure to Perl
-in other operating environments or if you intend to write code
-that will be portable to other environments, see L<perlport>
-for a reasonably definitive list of these differences.
-
-Not all extensions available from CPAN may build or work properly
-in the Win32 environment. See L</"Building Extensions">.
-
-Most C<socket()> related calls are supported, but they may not
-behave as on Unix platforms. See L<perlport> for the full list.
-
-Signal handling may not behave as on Unix platforms (where it
-doesn't exactly "behave", either :). For instance, calling C<die()>
-or C<exit()> from signal handlers will cause an exception, since most
-implementations of C<signal()> on Win32 are severely crippled.
-Thus, signals may work only for simple things like setting a flag
-variable in the handler. Using signals under this port should
-currently be considered unsupported.
-
-Please send detailed descriptions of any problems and solutions that
-you may find to <F<perlbug@perl.com>>, along with the output produced
-by C<perl -V>.
-
-=head1 AUTHORS
-
-=over 4
-
-Gary Ng E<lt>71564.1743@CompuServe.COME<gt>
-
-Gurusamy Sarathy E<lt>gsar@activestate.comE<gt>
-
-Nick Ing-Simmons E<lt>nick@ni-s.u-net.comE<gt>
-
-=back
-
-This document is maintained by Gurusamy Sarathy.
-
-=head1 SEE ALSO
-
-L<perl>
-
-=head1 HISTORY
-
-This port was originally contributed by Gary Ng around 5.003_24,
-and borrowed from the Hip Communications port that was available
-at the time. Various people have made numerous and sundry hacks
-since then.
-
-Borland support was added in 5.004_01 (Gurusamy Sarathy).
-
-GCC/mingw32 support was added in 5.005 (Nick Ing-Simmons).
-
-Support for PERL_OBJECT was added in 5.005 (ActiveState Tool Corp).
-
-Support for fork() emulation was added in 5.6 (ActiveState Tool Corp).
-
-Win9x support was added in 5.6 (Benjamin Stuhl).
-
-Last updated: 22 March 2000
-
-=cut
+If you read this file _as_is_, just ignore the funny characters you\r
+see. It is written in the POD format (see pod/perlpod.pod) which is\r
+specially designed to be readable as is.\r
+\r
+=head1 NAME\r
+\r
+perlwin32 - Perl under Win32\r
+\r
+=head1 SYNOPSIS\r
+\r
+These are instructions for building Perl under Windows (9x, NT and\r
+2000).\r
+\r
+=head1 DESCRIPTION\r
+\r
+Before you start, you should glance through the README file\r
+found in the top-level directory where the Perl distribution\r
+was extracted. Make sure you read and understand the terms under\r
+which this software is being distributed.\r
+\r
+Also make sure you read L<BUGS AND CAVEATS> below for the\r
+known limitations of this port.\r
+\r
+The INSTALL file in the perl top-level has much information that is\r
+only relevant to people building Perl on Unix-like systems. In\r
+particular, you can safely ignore any information that talks about\r
+"Configure".\r
+\r
+You may also want to look at two other options for building\r
+a perl that will work on Windows NT: the README.cygwin and\r
+README.os2 files, which each give a different set of rules to build\r
+a Perl that will work on Win32 platforms. Those two methods will\r
+probably enable you to build a more Unix-compatible perl, but you\r
+will also need to download and use various other build-time and\r
+run-time support software described in those files.\r
+\r
+This set of instructions is meant to describe a so-called "native"\r
+port of Perl to Win32 platforms. The resulting Perl requires no\r
+additional software to run (other than what came with your operating\r
+system). Currently, this port is capable of using one of the\r
+following compilers:\r
+\r
+ Borland C++ version 5.02 or later\r
+ Microsoft Visual C++ version 4.2 or later\r
+ Mingw32 with GCC version 2.95.2 or better\r
+\r
+The last of these is a high quality freeware compiler. Support\r
+for it is still experimental. (Older versions of GCC are known\r
+not to work.)\r
+\r
+This port currently supports MakeMaker (the set of modules that\r
+is used to build extensions to perl). Therefore, you should be\r
+able to build and install most extensions found in the CPAN sites.\r
+See L<Usage Hints> below for general hints about this.\r
+\r
+=head2 Setting Up\r
+\r
+=over 4\r
+\r
+=item Make\r
+\r
+You need a "make" program to build the sources. If you are using\r
+Visual C++ under Windows NT or 2000, nmake will work. All other\r
+builds need dmake.\r
+\r
+dmake is a freely available make that has very nice macro features\r
+and parallelability.\r
+\r
+A port of dmake for Windows is available from:\r
+\r
+ http://www.cpan.org/authors/id/GSAR/dmake-4.1pl1-win32.zip\r
+\r
+(This is a fixed version of original dmake sources obtained from\r
+http://www.wticorp.com/dmake/. As of version 4.1PL1, the original\r
+sources did not build as shipped, and had various other problems.\r
+A patch is included in the above fixed version.)\r
+\r
+Fetch and install dmake somewhere on your path (follow the instructions\r
+in the README.NOW file).\r
+\r
+=item Command Shell\r
+\r
+Use the default "cmd" shell that comes with NT. Some versions of the\r
+popular 4DOS/NT shell have incompatibilities that may cause you trouble.\r
+If the build fails under that shell, try building again with the cmd\r
+shell.\r
+\r
+The nmake Makefile also has known incompatibilities with the\r
+"command.com" shell that comes with Windows 9x. You will need to\r
+use dmake and makefile.mk to build under Windows 9x.\r
+\r
+The surest way to build it is on Windows NT, using the cmd shell.\r
+\r
+Make sure the path to the build directory does not contain spaces. The\r
+build usually works in this circumstance, but some tests will fail.\r
+\r
+=item Borland C++\r
+\r
+If you are using the Borland compiler, you will need dmake.\r
+(The make that Borland supplies is seriously crippled, and will not\r
+work for MakeMaker builds.)\r
+\r
+See L/"Make"> above.\r
+\r
+=item Microsoft Visual C++\r
+\r
+The nmake that comes with Visual C++ will suffice for building.\r
+You will need to run the VCVARS32.BAT file usually found somewhere\r
+like C:\MSDEV4.2\BIN. This will set your build environment.\r
+\r
+You can also use dmake to build using Visual C++, provided:\r
+you set OSRELEASE to "microsft" (or whatever the directory name\r
+under which the Visual C dmake configuration lives) in your environment,\r
+and edit win32/config.vc to change "make=nmake" into "make=dmake". The\r
+latter step is only essential if you want to use dmake as your default\r
+make for building extensions using MakeMaker.\r
+\r
+=item Mingw32 with GCC\r
+\r
+GCC-2.95.2 binaries can be downloaded from:\r
+\r
+ ftp://ftp.xraylith.wisc.edu/pub/khan/gnu-win32/mingw32/\r
+\r
+The GCC-2.95.2 bundle comes with Mingw32 libraries and headers.\r
+\r
+Make sure you install the binaries that work with MSVCRT.DLL as indicated\r
+in the README for the GCC bundle. You may need to set up a few environment\r
+variables (usually run from a batch file).\r
+\r
+The version of gcc-2.95.2-msvcrt.exe released 7 November 1999 left out\r
+a fix for certain command line quotes, so be sure to download and install\r
+fixes/quote-fix-msvcrt.exe too.\r
+\r
+You also need dmake. See L</"Make"> above on how to get it.\r
+\r
+=back\r
+\r
+=head2 Building\r
+\r
+=over 4\r
+\r
+=item *\r
+\r
+Make sure you are in the "win32" subdirectory under the perl toplevel.\r
+This directory contains a "Makefile" that will work with\r
+versions of nmake that come with Visual C++, and a dmake "makefile.mk"\r
+that will work for all supported compilers. The defaults in the dmake\r
+makefile are setup to build using the GCC compiler.\r
+\r
+=item *\r
+\r
+Edit the makefile.mk (or Makefile, if using nmake) and change the values\r
+of INST_DRV and INST_TOP. You can also enable various build\r
+flags. These are explained in the makefiles.\r
+\r
+You will have to make sure CCTYPE is set correctly, and CCHOME points\r
+to wherever you installed your compiler.\r
+\r
+The default value for CCHOME in the makefiles for Visual C++\r
+may not be correct for some versions. Make sure the default exists\r
+and is valid.\r
+\r
+If you have either the source or a library that contains des_fcrypt(),\r
+enable the appropriate option in the makefile. des_fcrypt() is not\r
+bundled with the distribution due to US Government restrictions\r
+on the export of cryptographic software. Nevertheless, this routine\r
+is part of the "libdes" library (written by Eric Young) which is widely\r
+available worldwide, usually along with SSLeay (for example:\r
+"ftp://fractal.mta.ca/pub/crypto/SSLeay/DES/"). Set CRYPT_SRC to the\r
+name of the file that implements des_fcrypt(). Alternatively, if\r
+you have built a library that contains des_fcrypt(), you can set\r
+CRYPT_LIB to point to the library name. The location above contains\r
+many versions of the "libdes" library, all with slightly different\r
+implementations of des_fcrypt(). Older versions have a single,\r
+self-contained file (fcrypt.c) that implements crypt(), so they may be\r
+easier to use. A patch against the fcrypt.c found in libdes-3.06 is\r
+in des_fcrypt.patch.\r
+\r
+Perl will also build without des_fcrypt(), but the crypt() builtin will\r
+fail at run time.\r
+\r
+Be sure to read the instructions near the top of the makefiles carefully.\r
+\r
+=item *\r
+\r
+Type "dmake" (or "nmake" if you are using that make).\r
+\r
+This should build everything. Specifically, it will create perl.exe,\r
+perl56.dll at the perl toplevel, and various other extension dll's\r
+under the lib\auto directory. If the build fails for any reason, make\r
+sure you have done the previous steps correctly.\r
+\r
+=back\r
+\r
+=head2 Testing\r
+\r
+Type "dmake test" (or "nmake test"). This will run most of the tests from\r
+the testsuite (many tests will be skipped).\r
+\r
+There should be no test failures when running under Windows NT 4.0 or\r
+Windows 2000. Many tests I<will> fail under Windows 9x due to the inferior\r
+command shell.\r
+\r
+Some test failures may occur if you use a command shell other than the\r
+native "cmd.exe", or if you are building from a path that contains\r
+spaces. So don't do that.\r
+\r
+If you are running the tests from a emacs shell window, you may see\r
+failures in op/stat.t. Run "dmake test-notty" in that case.\r
+\r
+If you're using the Borland compiler, you may see a failure in op/taint.t\r
+arising from the inability to find the Borland Runtime DLLs on the system\r
+default path. You will need to copy the DLLs reported by the messages\r
+from where Borland chose to install it, into the Windows system directory\r
+(usually somewhere like C:\WINNT\SYSTEM32), and rerun the test.\r
+\r
+Please report any other failures as described under L<BUGS AND CAVEATS>.\r
+\r
+=head2 Installation\r
+\r
+Type "dmake install" (or "nmake install"). This will put the newly\r
+built perl and the libraries under whatever C<INST_TOP> points to in the\r
+Makefile. It will also install the pod documentation under\r
+C<$INST_TOP\$VERSION\lib\pod> and HTML versions of the same under\r
+C<$INST_TOP\$VERSION\lib\pod\html>. To use the Perl you just installed,\r
+you will need to add two components to your PATH environment variable,\r
+C<$INST_TOP\$VERSION\bin>, and C<$INST_TOP\$VERSION\bin\$ARCHNAME>.\r
+For example:\r
+\r
+ set PATH c:\perl\5.6.0\bin;c:\perl\5.6.0\bin\MSWin32-x86;%PATH%\r
+\r
+If you opt to comment out INST_VER and INST_ARCH in the makefiles, the\r
+installation structure is much simpler. In that case, it will be\r
+sufficient to add a single entry to the path, for instance:\r
+\r
+ set PATH c:\perl\bin;%PATH%\r
+\r
+=head2 Usage Hints\r
+\r
+=over 4\r
+\r
+=item Environment Variables\r
+\r
+The installation paths that you set during the build get compiled\r
+into perl, so you don't have to do anything additional to start\r
+using that perl (except add its location to your PATH variable).\r
+\r
+If you put extensions in unusual places, you can set PERL5LIB\r
+to a list of paths separated by semicolons where you want perl\r
+to look for libraries. Look for descriptions of other environment\r
+variables you can set in L<perlrun>.\r
+\r
+You can also control the shell that perl uses to run system() and\r
+backtick commands via PERL5SHELL. See L<perlrun>.\r
+\r
+Perl does not depend on the registry, but it can look up certain default\r
+values if you choose to put them there. Perl attempts to read entries from\r
+C<HKEY_CURRENT_USER\Software\Perl> and C<HKEY_LOCAL_MACHINE\Software\Perl>.\r
+Entries in the former override entries in the latter. One or more of the\r
+following entries (of type REG_SZ or REG_EXPAND_SZ) may be set:\r
+\r
+ lib-$] version-specific standard library path to add to @INC\r
+ lib standard library path to add to @INC\r
+ sitelib-$] version-specific site library path to add to @INC\r
+ sitelib site library path to add to @INC\r
+ vendorlib-$] version-specific vendor library path to add to @INC\r
+ vendorlib vendor library path to add to @INC\r
+ PERL* fallback for all %ENV lookups that begin with "PERL"\r
+\r
+Note the C<$]> in the above is not literal. Substitute whatever version\r
+of perl you want to honor that entry, e.g. C<5.6.0>. Paths must be\r
+separated with semicolons, as usual on win32.\r
+\r
+=item File Globbing\r
+\r
+By default, perl handles file globbing using the File::Glob extension,\r
+which provides portable globbing.\r
+\r
+If you want perl to use globbing that emulates the quirks of DOS\r
+filename conventions, you might want to consider using File::DosGlob\r
+to override the internal glob() implementation. See L<File::DosGlob> for\r
+details.\r
+\r
+=item Using perl from the command line\r
+\r
+If you are accustomed to using perl from various command-line\r
+shells found in UNIX environments, you will be less than pleased\r
+with what Windows offers by way of a command shell.\r
+\r
+The crucial thing to understand about the Windows environment is that\r
+the command line you type in is processed twice before Perl sees it.\r
+First, your command shell (usually CMD.EXE on Windows NT, and\r
+COMMAND.COM on Windows 9x) preprocesses the command line, to handle\r
+redirection, environment variable expansion, and location of the\r
+executable to run. Then, the perl executable splits the remaining\r
+command line into individual arguments, using the C runtime library\r
+upon which Perl was built.\r
+\r
+It is particularly important to note that neither the shell nor the C\r
+runtime do any wildcard expansions of command-line arguments (so\r
+wildcards need not be quoted). Also, the quoting behaviours of the\r
+shell and the C runtime are rudimentary at best (and may, if you are\r
+using a non-standard shell, be inconsistent). The only (useful) quote\r
+character is the double quote ("). It can be used to protect spaces in\r
+arguments and other special characters. The Windows NT documentation\r
+has almost no description of how the quoting rules are implemented, but\r
+here are some general observations based on experiments: The C runtime\r
+breaks arguments at spaces and passes them to programs in argc/argv.\r
+Doublequotes can be used to prevent arguments with spaces in them from\r
+being split up. You can put a double quote in an argument by escaping\r
+it with a backslash and enclosing the whole argument within double\r
+quotes. The backslash and the pair of double quotes surrounding the\r
+argument will be stripped by the C runtime.\r
+\r
+The file redirection characters "<", ">", and "|" can be quoted by\r
+double quotes (although there are suggestions that this may not always\r
+be true). Single quotes are not treated as quotes by the shell or the C\r
+runtime. The caret "^" has also been observed to behave as a quoting\r
+character, but this appears to be a shell feature, and the caret is not\r
+stripped from the command line, so Perl still sees it (and the C runtime\r
+phase does not treat the caret as a quote character).\r
+\r
+Here are some examples of usage of the "cmd" shell:\r
+\r
+This prints two doublequotes:\r
+\r
+ perl -e "print '\"\"' "\r
+\r
+This does the same:\r
+\r
+ perl -e "print \"\\\"\\\"\" "\r
+\r
+This prints "bar" and writes "foo" to the file "blurch":\r
+\r
+ perl -e "print 'foo'; print STDERR 'bar'" > blurch\r
+\r
+This prints "foo" ("bar" disappears into nowhereland):\r
+\r
+ perl -e "print 'foo'; print STDERR 'bar'" 2> nul\r
+\r
+This prints "bar" and writes "foo" into the file "blurch":\r
+\r
+ perl -e "print 'foo'; print STDERR 'bar'" 1> blurch\r
+\r
+This pipes "foo" to the "less" pager and prints "bar" on the console:\r
+\r
+ perl -e "print 'foo'; print STDERR 'bar'" | less\r
+\r
+This pipes "foo\nbar\n" to the less pager:\r
+\r
+ perl -le "print 'foo'; print STDERR 'bar'" 2>&1 | less\r
+\r
+This pipes "foo" to the pager and writes "bar" in the file "blurch":\r
+\r
+ perl -e "print 'foo'; print STDERR 'bar'" 2> blurch | less\r
+\r
+\r
+Discovering the usefulness of the "command.com" shell on Windows 9x\r
+is left as an exercise to the reader :)\r
+\r
+One particularly pernicious problem with the 4NT command shell for\r
+Windows NT is that it (nearly) always treats a % character as indicating\r
+that environment variable expansion is needed. Under this shell, it is\r
+therefore important to always double any % characters which you want\r
+Perl to see (for example, for hash variables), even when they are\r
+quoted.\r
+\r
+=item Building Extensions\r
+\r
+The Comprehensive Perl Archive Network (CPAN) offers a wealth\r
+of extensions, some of which require a C compiler to build.\r
+Look in http://www.cpan.org/ for more information on CPAN.\r
+\r
+Note that not all of the extensions available from CPAN may work\r
+in the Win32 environment; you should check the information at\r
+http://testers.cpan.org/ before investing too much effort into\r
+porting modules that don't readily build.\r
+\r
+Most extensions (whether they require a C compiler or not) can\r
+be built, tested and installed with the standard mantra:\r
+\r
+ perl Makefile.PL\r
+ $MAKE\r
+ $MAKE test\r
+ $MAKE install\r
+\r
+where $MAKE is whatever 'make' program you have configured perl to\r
+use. Use "perl -V:make" to find out what this is. Some extensions\r
+may not provide a testsuite (so "$MAKE test" may not do anything, or\r
+fail), but most serious ones do.\r
+\r
+It is important that you use a supported 'make' program, and\r
+ensure Config.pm knows about it. If you don't have nmake, you can\r
+either get dmake from the location mentioned earlier, or get an\r
+old version of nmake reportedly available from:\r
+\r
+ ftp://ftp.microsoft.com/Softlib/MSLFILES/nmake15.exe\r
+\r
+Another option is to use the make written in Perl, available from\r
+CPAN:\r
+\r
+ http://www.cpan.org/authors/id/NI-S/Make-0.03.tar.gz\r
+\r
+You may also use dmake. See L</"Make"> above on how to get it.\r
+\r
+Note that MakeMaker actually emits makefiles with different syntax\r
+depending on what 'make' it thinks you are using. Therefore, it is\r
+important that one of the following values appears in Config.pm:\r
+\r
+ make='nmake' # MakeMaker emits nmake syntax\r
+ make='dmake' # MakeMaker emits dmake syntax\r
+ any other value # MakeMaker emits generic make syntax\r
+ (e.g GNU make, or Perl make)\r
+\r
+If the value doesn't match the 'make' program you want to use,\r
+edit Config.pm to fix it.\r
+\r
+If a module implements XSUBs, you will need one of the supported\r
+C compilers. You must make sure you have set up the environment for\r
+the compiler for command-line compilation.\r
+\r
+If a module does not build for some reason, look carefully for\r
+why it failed, and report problems to the module author. If\r
+it looks like the extension building support is at fault, report\r
+that with full details of how the build failed using the perlbug\r
+utility.\r
+\r
+=item Command-line Wildcard Expansion\r
+\r
+The default command shells on DOS descendant operating systems (such\r
+as they are) usually do not expand wildcard arguments supplied to\r
+programs. They consider it the application's job to handle that.\r
+This is commonly achieved by linking the application (in our case,\r
+perl) with startup code that the C runtime libraries usually provide.\r
+However, doing that results in incompatible perl versions (since the\r
+behavior of the argv expansion code differs depending on the\r
+compiler, and it is even buggy on some compilers). Besides, it may\r
+be a source of frustration if you use such a perl binary with an\r
+alternate shell that *does* expand wildcards.\r
+\r
+Instead, the following solution works rather well. The nice things\r
+about it: 1) you can start using it right away 2) it is more powerful,\r
+because it will do the right thing with a pattern like */*/*.c\r
+3) you can decide whether you do/don't want to use it 4) you can\r
+extend the method to add any customizations (or even entirely\r
+different kinds of wildcard expansion).\r
+\r
+ C:\> copy con c:\perl\lib\Wild.pm\r
+ # Wild.pm - emulate shell @ARGV expansion on shells that don't\r
+ use File::DosGlob;\r
+ @ARGV = map {\r
+ my @g = File::DosGlob::glob($_) if /[*?]/;\r
+ @g ? @g : $_;\r
+ } @ARGV;\r
+ 1;\r
+ ^Z\r
+ C:\> set PERL5OPT=-MWild\r
+ C:\> perl -le "for (@ARGV) { print }" */*/perl*.c\r
+ p4view/perl/perl.c\r
+ p4view/perl/perlio.c\r
+ p4view/perl/perly.c\r
+ perl5.005/win32/perlglob.c\r
+ perl5.005/win32/perllib.c\r
+ perl5.005/win32/perlglob.c\r
+ perl5.005/win32/perllib.c\r
+ perl5.005/win32/perlglob.c\r
+ perl5.005/win32/perllib.c\r
+\r
+Note there are two distinct steps there: 1) You'll have to create\r
+Wild.pm and put it in your perl lib directory. 2) You'll need to\r
+set the PERL5OPT environment variable. If you want argv expansion\r
+to be the default, just set PERL5OPT in your default startup\r
+environment.\r
+\r
+If you are using the Visual C compiler, you can get the C runtime's\r
+command line wildcard expansion built into perl binary. The resulting\r
+binary will always expand unquoted command lines, which may not be\r
+what you want if you use a shell that does that for you. The expansion\r
+done is also somewhat less powerful than the approach suggested above.\r
+\r
+=item Win32 Specific Extensions\r
+\r
+A number of extensions specific to the Win32 platform are available\r
+from CPAN. You may find that many of these extensions are meant to\r
+be used under the Activeware port of Perl, which used to be the only\r
+native port for the Win32 platform. Since the Activeware port does not\r
+have adequate support for Perl's extension building tools, these\r
+extensions typically do not support those tools either, and therefore\r
+cannot be built using the generic steps shown in the previous section.\r
+\r
+To ensure smooth transitioning of existing code that uses the\r
+ActiveState port, there is a bundle of Win32 extensions that contains\r
+all of the ActiveState extensions and most other Win32 extensions from\r
+CPAN in source form, along with many added bugfixes, and with MakeMaker\r
+support. This bundle is available at:\r
+\r
+ http://www.cpan.org/authors/id/GSAR/libwin32-0.151.zip\r
+\r
+See the README in that distribution for building and installation\r
+instructions. Look for later versions that may be available at the\r
+same location.\r
+\r
+=item Running Perl Scripts\r
+\r
+Perl scripts on UNIX use the "#!" (a.k.a "shebang") line to\r
+indicate to the OS that it should execute the file using perl.\r
+Win32 has no comparable means to indicate arbitrary files are\r
+executables.\r
+\r
+Instead, all available methods to execute plain text files on\r
+Win32 rely on the file "extension". There are three methods\r
+to use this to execute perl scripts:\r
+\r
+=over 8\r
+\r
+=item 1\r
+\r
+There is a facility called "file extension associations" that will\r
+work in Windows NT 4.0. This can be manipulated via the two\r
+commands "assoc" and "ftype" that come standard with Windows NT\r
+4.0. Type "ftype /?" for a complete example of how to set this\r
+up for perl scripts (Say what? You thought Windows NT wasn't\r
+perl-ready? :).\r
+\r
+=item 2\r
+\r
+Since file associations don't work everywhere, and there are\r
+reportedly bugs with file associations where it does work, the\r
+old method of wrapping the perl script to make it look like a\r
+regular batch file to the OS, may be used. The install process\r
+makes available the "pl2bat.bat" script which can be used to wrap\r
+perl scripts into batch files. For example:\r
+\r
+ pl2bat foo.pl\r
+\r
+will create the file "FOO.BAT". Note "pl2bat" strips any\r
+.pl suffix and adds a .bat suffix to the generated file.\r
+\r
+If you use the 4DOS/NT or similar command shell, note that\r
+"pl2bat" uses the "%*" variable in the generated batch file to\r
+refer to all the command line arguments, so you may need to make\r
+sure that construct works in batch files. As of this writing,\r
+4DOS/NT users will need a "ParameterChar = *" statement in their\r
+4NT.INI file, or will need to execute "setdos /p*" in the 4DOS/NT\r
+startup file to enable this to work.\r
+\r
+=item 3\r
+\r
+Using "pl2bat" has a few problems: the file name gets changed,\r
+so scripts that rely on C<$0> to find what they must do may not\r
+run properly; running "pl2bat" replicates the contents of the\r
+original script, and so this process can be maintenance intensive\r
+if the originals get updated often. A different approach that\r
+avoids both problems is possible.\r
+\r
+A script called "runperl.bat" is available that can be copied\r
+to any filename (along with the .bat suffix). For example,\r
+if you call it "foo.bat", it will run the file "foo" when it is\r
+executed. Since you can run batch files on Win32 platforms simply\r
+by typing the name (without the extension), this effectively\r
+runs the file "foo", when you type either "foo" or "foo.bat".\r
+With this method, "foo.bat" can even be in a different location\r
+than the file "foo", as long as "foo" is available somewhere on\r
+the PATH. If your scripts are on a filesystem that allows symbolic\r
+links, you can even avoid copying "runperl.bat".\r
+\r
+Here's a diversion: copy "runperl.bat" to "runperl", and type\r
+"runperl". Explain the observed behavior, or lack thereof. :)\r
+Hint: .gnidnats llits er'uoy fi ,"lrepnur" eteled :tniH\r
+\r
+=back\r
+\r
+=item Miscellaneous Things\r
+\r
+A full set of HTML documentation is installed, so you should be\r
+able to use it if you have a web browser installed on your\r
+system.\r
+\r
+C<perldoc> is also a useful tool for browsing information contained\r
+in the documentation, especially in conjunction with a pager\r
+like C<less> (recent versions of which have Win32 support). You may\r
+have to set the PAGER environment variable to use a specific pager.\r
+"perldoc -f foo" will print information about the perl operator\r
+"foo".\r
+\r
+If you find bugs in perl, you can run C<perlbug> to create a\r
+bug report (you may have to send it manually if C<perlbug> cannot\r
+find a mailer on your system).\r
+\r
+=back\r
+\r
+=head1 BUGS AND CAVEATS\r
+\r
+Some of the built-in functions do not act exactly as documented in\r
+L<perlfunc>, and a few are not implemented at all. To avoid\r
+surprises, particularly if you have had prior exposure to Perl\r
+in other operating environments or if you intend to write code\r
+that will be portable to other environments, see L<perlport>\r
+for a reasonably definitive list of these differences.\r
+\r
+Not all extensions available from CPAN may build or work properly\r
+in the Win32 environment. See L</"Building Extensions">.\r
+\r
+Most C<socket()> related calls are supported, but they may not\r
+behave as on Unix platforms. See L<perlport> for the full list.\r
+\r
+Signal handling may not behave as on Unix platforms (where it\r
+doesn't exactly "behave", either :). For instance, calling C<die()>\r
+or C<exit()> from signal handlers will cause an exception, since most\r
+implementations of C<signal()> on Win32 are severely crippled.\r
+Thus, signals may work only for simple things like setting a flag\r
+variable in the handler. Using signals under this port should\r
+currently be considered unsupported.\r
+\r
+Please send detailed descriptions of any problems and solutions that \r
+you may find to <F<perlbug@perl.com>>, along with the output produced\r
+by C<perl -V>.\r
+\r
+=head1 AUTHORS\r
+\r
+=over 4\r
+\r
+Gary Ng E<lt>71564.1743@CompuServe.COME<gt>\r
+\r
+Gurusamy Sarathy E<lt>gsar@activestate.comE<gt>\r
+\r
+Nick Ing-Simmons E<lt>nick@ni-s.u-net.comE<gt>\r
+\r
+=back\r
+\r
+This document is maintained by Gurusamy Sarathy.\r
+\r
+=head1 SEE ALSO\r
+\r
+L<perl>\r
+\r
+=head1 HISTORY\r
+\r
+This port was originally contributed by Gary Ng around 5.003_24,\r
+and borrowed from the Hip Communications port that was available\r
+at the time. Various people have made numerous and sundry hacks\r
+since then.\r
+\r
+Borland support was added in 5.004_01 (Gurusamy Sarathy).\r
+\r
+GCC/mingw32 support was added in 5.005 (Nick Ing-Simmons).\r
+\r
+Support for PERL_OBJECT was added in 5.005 (ActiveState Tool Corp).\r
+\r
+Support for fork() emulation was added in 5.6 (ActiveState Tool Corp).\r
+\r
+Win9x support was added in 5.6 (Benjamin Stuhl).\r
+\r
+Last updated: 22 March 2000\r
+\r
+=cut\r
-@echo off
-set CONFIG=
-set PATH_SEPARATOR=;
-set PATH_EXPAND=y
-sh -c 'if test $PATH_SEPARATOR = ";"; then exit 1; fi'
-if ERRORLEVEL 1 goto path_sep_ok
-echo Error:\a
-echo Make sure the environment variable PATH_SEPARATOR=; while building perl!
-echo Please check your DJGPP.ENV!
-goto end
-
-:path_sep_ok
-sh -c 'if test $PATH_EXPAND = "Y" -o $PATH_EXPAND = "y"; then exit 1; fi'
-if ERRORLEVEL 1 goto path_exp_ok
-echo Error:\a
-echo Make sure the environment variable PATH_EXPAND=Y while building perl!
-echo Please check your DJGPP.ENV!
-goto end
-
-:path_exp_ok
-sh -c '$SHELL -c "exit 128"'
-if ERRORLEVEL 128 goto shell_ok
-
-echo Error:\a
-echo The SHELL environment variable must be set to the full path of your sh.exe!
-goto end
-
-:shell_ok
-sh -c 'if test ! -d /tmp; then mkdir /tmp; fi'
-cp djgpp.c config.over ..
-cd ..
-echo Running sed...
-sh djgpp/djgppsed.sh
-
-echo Running Configure...
-sh Configure %1 %2 %3 %4 %5 %6 %7 %8 %9
-:end
+@echo off\r
+set CONFIG=\r
+set PATH_SEPARATOR=;\r
+set PATH_EXPAND=y\r
+sh -c 'if test $PATH_SEPARATOR = ";"; then exit 1; fi'\r
+if ERRORLEVEL 1 goto path_sep_ok\r
+echo Error:\a\r
+echo Make sure the environment variable PATH_SEPARATOR=; while building perl!\r
+echo Please check your DJGPP.ENV!\r
+goto end\r
+\r
+:path_sep_ok\r
+sh -c 'if test $PATH_EXPAND = "Y" -o $PATH_EXPAND = "y"; then exit 1; fi'\r
+if ERRORLEVEL 1 goto path_exp_ok\r
+echo Error:\a\r
+echo Make sure the environment variable PATH_EXPAND=Y while building perl!\r
+echo Please check your DJGPP.ENV!\r
+goto end\r
+\r
+:path_exp_ok\r
+sh -c '$SHELL -c "exit 128"'\r
+if ERRORLEVEL 128 goto shell_ok\r
+\r
+echo Error:\a\r
+echo The SHELL environment variable must be set to the full path of your sh.exe!\r
+goto end\r
+\r
+:shell_ok\r
+sh -c 'if test ! -d /tmp; then mkdir /tmp; fi'\r
+cp djgpp.c config.over ..\r
+cd ..\r
+echo Running sed...\r
+sh djgpp/djgppsed.sh\r
+\r
+echo Running Configure...\r
+sh Configure %1 %2 %3 %4 %5 %6 %7 %8 %9\r
+:end\r
-#
-# Makefile to build perl on Windows NT using Microsoft NMAKE.
-#
-# This is set up to build a perl.exe that runs off a shared library
-# (perl56.dll). Also makes individual DLLs for the XS extensions.
-#
-
-##
-## Make sure you read README.win32 *before* you mess with anything here!
-##
-
-##
-## Build configuration. Edit the values below to suit your needs.
-##
-
-#
-# Set these to wherever you want "nmake install" to put your
-# newly built perl.
-#
-INST_DRV = c:
-INST_TOP = $(INST_DRV)\perl
-
-#
-# Comment this out if you DON'T want your perl installation to be versioned.
-# This means that the new installation will overwrite any files from the
-# old installation at the same INST_TOP location. Leaving it enabled is
-# the safest route, as perl adds the extra version directory to all the
-# locations it installs files to. If you disable it, an alternative
-# versioned installation can be obtained by setting INST_TOP above to a
-# path that includes an arbitrary version string.
-#
-INST_VER = \5.6.0
-
-#
-# Comment this out if you DON'T want your perl installation to have
-# architecture specific components. This means that architecture-
-# specific files will be installed along with the architecture-neutral
-# files. Leaving it enabled is safer and more flexible, in case you
-# want to build multiple flavors of perl and install them together in
-# the same location. Commenting it out gives you a simpler
-# installation that is easier to understand for beginners.
-#
-INST_ARCH = \$(ARCHNAME)
-
-#
-# uncomment to enable multiple interpreters. This is need for fork()
-# emulation.
-#
-#USE_MULTI = define
-
-#
-# Beginnings of interpreter cloning/threads; still very incomplete.
-# This should be enabled to get the fork() emulation. This needs
-# USE_MULTI as well.
-#
-#USE_ITHREADS = define
-
-#
-# uncomment to enable the implicit "host" layer for all system calls
-# made by perl. This needs USE_MULTI above. This is also needed to
-# get fork().
-#
-#USE_IMP_SYS = define
-
-#
-# WARNING! This option is deprecated and will eventually go away (enable
-# USE_ITHREADS instead).
-#
-# uncomment to enable threads-capabilities. This is incompatible with
-# USE_ITHREADS, and is only here for people who may have come to rely
-# on the experimental Thread support that was in 5.005.
-#
-#USE_5005THREADS= define
-
-#
-# WARNING! This option is deprecated and will eventually go away (enable
-# USE_MULTI instead).
-#
-# uncomment next line if you want to use the PERL_OBJECT build option.
-# DO NOT ENABLE unless you have legacy code that relies on the C++
-# CPerlObj class that was available in 5.005. This cannot be enabled
-# if you ask for USE_5005THREADS above.
-#
-#USE_OBJECT = define
-
-#
-# uncomment one of the following lines if you are using either
-# Visual C++ 2.x or Visual C++ 6.x (aka Visual Studio 98)
-#
-#CCTYPE = MSVC20
-#CCTYPE = MSVC60
-
-#
-# uncomment next line if you want debug version of perl (big,slow)
-#
-#CFG = Debug
-
-#
-# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
-# It has patches that fix known bugs in older versions of MSVCRT.DLL.
-# This currently requires VC 5.0 with Service Pack 3 or later.
-# Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/
-# and follow the directions in the package to install.
-#
-# Not recommended if you have VC 6.x and you're not running Windows 9x.
-#
-#USE_PERLCRT = define
-
-#
-# uncomment to enable linking with setargv.obj under the Visual C
-# compiler. Setting this options enables perl to expand wildcards in
-# arguments, but it may be harder to use alternate methods like
-# File::DosGlob that are more powerful. This option is supported only with
-# Visual C.
-#
-#USE_SETARGV = define
-
-#
-# if you have the source for des_fcrypt(), uncomment this and make sure the
-# file exists (see README.win32). File should be located in the same
-# directory as this file.
-#
-#CRYPT_SRC = fcrypt.c
-
-#
-# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
-# library, uncomment this, and make sure the library exists (see README.win32)
-# Specify the full pathname of the library.
-#
-#CRYPT_LIB = fcrypt.lib
-
-#
-# set this if you wish to use perl's malloc
-# WARNING: Turning this on/off WILL break binary compatibility with extensions
-# you may have compiled with/without it. Be prepared to recompile all
-# extensions if you change the default. Currently, this cannot be enabled
-# if you ask for USE_IMP_SYS above.
-#
-#PERL_MALLOC = define
-
-#
-# set the install locations of the compiler include/libraries
-# Running VCVARS32.BAT is *required* when using Visual C.
-# Some versions of Visual C don't define MSVCDIR in the environment,
-# so you may have to set CCHOME explicitly (spaces in the path name should
-# not be quoted)
-#
-#CCHOME = f:\msvc20
-CCHOME = $(MSVCDIR)
-CCINCDIR = $(CCHOME)\include
-CCLIBDIR = $(CCHOME)\lib
-
-#
-# Additional compiler flags can be specified here.
-#
-
-#
-# This should normally be disabled. Adding -DPERL_POLLUTE enables support
-# for old symbols by default, at the expense of extreme pollution. You most
-# probably just want to build modules that won't compile with
-# perl Makefile.PL POLLUTE=1
-# instead of enabling this. Please report such modules to the respective
-# authors.
-#
-#BUILDOPT = $(BUILDOPT) -DPERL_POLLUTE
-
-#
-# This should normally be disabled. Enabling it will disable the File::Glob
-# implementation of CORE::glob.
-#
-#BUILDOPT = $(BUILDOPT) -DPERL_EXTERNAL_GLOB
-
-#
-# This should normally be disabled. Enabling it causes perl to read scripts
-# in text mode (which is the 5.005 behavior) and will break ByteLoader.
-#BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS
-
-#
-# specify semicolon-separated list of extra directories that modules will
-# look for libraries (spaces in path names need not be quoted)
-#
-EXTRALIBDIRS =
-
-#
-# set this to your email address (perl will guess a value from
-# from your loginname and your hostname, which may not be right)
-#
-#EMAIL =
-
-##
-## Build configuration ends.
-##
-
-##################### CHANGE THESE ONLY IF YOU MUST #####################
-
-!IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
-D_CRYPT = undef
-!ELSE
-D_CRYPT = define
-CRYPT_FLAG = -DHAVE_DES_FCRYPT
-!ENDIF
-
-!IF "$(USE_OBJECT)" == "define"
-PERL_MALLOC = undef
-USE_5005THREADS = undef
-USE_MULTI = undef
-USE_IMP_SYS = define
-!ENDIF
-
-!IF "$(PERL_MALLOC)" == ""
-PERL_MALLOC = undef
-!ENDIF
-
-!IF "$(USE_5005THREADS)" == ""
-USE_5005THREADS = undef
-!ENDIF
-
-!IF "$(USE_5005THREADS)" == "define"
-USE_ITHREADS = undef
-!ENDIF
-
-!IF "$(USE_IMP_SYS)" == "define"
-PERL_MALLOC = undef
-!ENDIF
-
-!IF "$(USE_MULTI)" == ""
-USE_MULTI = undef
-!ENDIF
-
-!IF "$(USE_OBJECT)" == ""
-USE_OBJECT = undef
-!ENDIF
-
-!IF "$(USE_ITHREADS)" == ""
-USE_ITHREADS = undef
-!ENDIF
-
-!IF "$(USE_IMP_SYS)" == ""
-USE_IMP_SYS = undef
-!ENDIF
-
-!IF "$(USE_PERLCRT)" == ""
-USE_PERLCRT = undef
-!ENDIF
-
-!IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" == "defineundefundefundef"
-USE_MULTI = define
-!ENDIF
-
-!IF "$(USE_ITHREADS)$(USE_MULTI)$(USE_OBJECT)" == "defineundefundef"
-USE_MULTI = define
-USE_5005THREADS = undef
-!ENDIF
-
-!IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef"
-BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
-!ENDIF
-
-!IF "$(USE_IMP_SYS)" != "undef"
-BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS
-!ENDIF
-
-!IF "$(PROCESSOR_ARCHITECTURE)" == ""
-PROCESSOR_ARCHITECTURE = x86
-!ENDIF
-
-!IF "$(USE_OBJECT)" == "define"
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-object
-!ELSE
-!IF "$(USE_5005THREADS)" == "define"
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread
-!ELSE
-!IF "$(USE_MULTI)" == "define"
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
-!ELSE
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
-!ENDIF
-!ENDIF
-!ENDIF
-
-!IF "$(USE_ITHREADS)" == "define"
-ARCHNAME = $(ARCHNAME)-thread
-!ENDIF
-
-# Visual Studio 98 specific
-!IF "$(CCTYPE)" == "MSVC60"
-
-# VC 6.0 can load the socket dll on demand. Makes the test suite
-# run in about 10% less time.
-DELAYLOAD = -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib
-
-# VC 6.0 seems capable of compiling perl correctly with optimizations
-# enabled. Anything earlier fails tests.
-!IF "$(CFG)" == ""
-CFG = Optimize
-!ENDIF
-!ENDIF
-
-ARCHDIR = ..\lib\$(ARCHNAME)
-COREDIR = ..\lib\CORE
-AUTODIR = ..\lib\auto
-LIBDIR = ..\lib
-EXTDIR = ..\ext
-PODDIR = ..\pod
-EXTUTILSDIR = $(LIBDIR)\ExtUtils
-
-#
-INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
-INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
-INST_LIB = $(INST_TOP)$(INST_VER)\lib
-INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
-INST_COREDIR = $(INST_ARCHLIB)\CORE
-INST_POD = $(INST_LIB)\pod
-INST_HTML = $(INST_POD)\html
-
-#
-# Programs to compile, build .lib files and link
-#
-
-CC = cl
-LINK32 = link
-LIB32 = $(LINK32) -lib
-RSC = rc
-
-#
-# Options
-#
-
-INCLUDES = -I$(COREDIR) -I.\include -I. -I..
-#PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
-DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
-LOCDEFS = -DPERLDLL -DPERL_CORE
-SUBSYS = console
-CXX_FLAG = -TP -GX
-
-!IF "$(USE_PERLCRT)" != "define"
-LIBC = msvcrt.lib
-!ELSE
-LIBC = PerlCRT.lib
-!ENDIF
-
-PERLEXE_RES =
-PERLDLL_RES =
-
-!IF "$(CFG)" == "Debug"
-! IF "$(CCTYPE)" == "MSVC20"
-OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
-! ELSE
-OPTIMIZE = -Od -MD -Zi -DDEBUGGING
-! ENDIF
-LINK_DBG = -debug -pdb:none
-!ELSE
-! IF "$(CFG)" == "Optimize"
-# -O1 yields smaller code, which turns out to be faster than -O2
-#OPTIMIZE = -O2 -MD -DNDEBUG
-OPTIMIZE = -O1 -MD -DNDEBUG
-! ELSE
-OPTIMIZE = -Od -MD -DNDEBUG
-! ENDIF
-LINK_DBG = -release
-!ENDIF
-
-!IF "$(USE_OBJECT)" == "define"
-OPTIMIZE = $(OPTIMIZE) $(CXX_FLAG)
-BUILDOPT = $(BUILDOPT) -DPERL_OBJECT
-!ENDIF
-
-!IF "$(USE_PERLCRT)" != "define"
-BUILDOPT = $(BUILDOPT) -DPERL_MSVCRT_READFIX
-!ENDIF
-
-LIBBASEFILES = $(CRYPT_LIB) \
- oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
- comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
- netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
- version.lib odbc32.lib odbccp32.lib
-
-# we add LIBC here, since we may be using PerlCRT.dll
-LIBFILES = $(LIBBASEFILES) $(LIBC)
-
-CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
- $(PCHFLAGS) $(OPTIMIZE)
-LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
- -libpath:"$(INST_COREDIR)" \
- -machine:$(PROCESSOR_ARCHITECTURE)
-OBJOUT_FLAG = -Fo
-EXEOUT_FLAG = -Fe
-
-CFLAGS_O = $(CFLAGS) $(BUILDOPT)
-
-#################### do not edit below this line #######################
-############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
-
-o = .obj
-
-#
-# Rules
-#
-
-.SUFFIXES : .c $(o) .dll .lib .exe .rc .res
-
-.c$(o):
- $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
-
-.y.c:
- $(NOOP)
-
-$(o).dll:
- $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
- -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
-
-.rc.res:
- $(RSC) -i.. $<
-
-#
-# various targets
-PERLIMPLIB = ..\perl56.lib
-PERLDLL = ..\perl56.dll
-
-MINIPERL = ..\miniperl.exe
-MINIDIR = .\mini
-PERLEXE = ..\perl.exe
-WPERLEXE = ..\wperl.exe
-GLOBEXE = ..\perlglob.exe
-CONFIGPM = ..\lib\Config.pm
-MINIMOD = ..\lib\ExtUtils\Miniperl.pm
-X2P = ..\x2p\a2p.exe
-
-PL2BAT = bin\pl2bat.pl
-GLOBBAT = bin\perlglob.bat
-
-UTILS = \
- ..\utils\h2ph \
- ..\utils\splain \
- ..\utils\dprofpp \
- ..\utils\perlbug \
- ..\utils\pl2pm \
- ..\utils\c2ph \
- ..\utils\h2xs \
- ..\utils\perldoc \
- ..\utils\perlcc \
- ..\pod\checkpods \
- ..\pod\pod2html \
- ..\pod\pod2latex \
- ..\pod\pod2man \
- ..\pod\pod2text \
- ..\pod\pod2usage \
- ..\pod\podchecker \
- ..\pod\podselect \
- ..\x2p\find2perl \
- ..\x2p\s2p \
- bin\exetype.pl \
- bin\runperl.pl \
- bin\pl2bat.pl \
- bin\perlglob.pl \
- bin\search.pl
-
-MAKE = nmake -nologo
-
-CFGSH_TMPL = config.vc
-CFGH_TMPL = config_H.vc
-
-XCOPY = xcopy /f /r /i /d
-RCOPY = xcopy /f /r /i /e /d
-NOOP = @echo
-NULL =
-
-#
-# filenames given to xsubpp must have forward slashes (since it puts
-# full pathnames in #line strings)
-XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
- -C++ -prototypes
-
-MICROCORE_SRC = \
- ..\av.c \
- ..\deb.c \
- ..\doio.c \
- ..\doop.c \
- ..\dump.c \
- ..\globals.c \
- ..\gv.c \
- ..\hv.c \
- ..\mg.c \
- ..\op.c \
- ..\perl.c \
- ..\perlapi.c \
- ..\perly.c \
- ..\pp.c \
- ..\pp_ctl.c \
- ..\pp_hot.c \
- ..\pp_sys.c \
- ..\regcomp.c \
- ..\regexec.c \
- ..\run.c \
- ..\scope.c \
- ..\sv.c \
- ..\taint.c \
- ..\toke.c \
- ..\universal.c \
- ..\utf8.c \
- ..\util.c \
- ..\xsutils.c
-
-EXTRACORE_SRC = $(EXTRACORE_SRC) perllib.c
-
-!IF "$(PERL_MALLOC)" == "define"
-EXTRACORE_SRC = $(EXTRACORE_SRC) ..\malloc.c
-!ENDIF
-
-!IF "$(USE_OBJECT)" != "define"
-EXTRACORE_SRC = $(EXTRACORE_SRC) ..\perlio.c
-!ENDIF
-
-WIN32_SRC = \
- .\win32.c \
- .\win32sck.c \
- .\win32thread.c
-
-!IF "$(CRYPT_SRC)" != ""
-WIN32_SRC = $(WIN32_SRC) .\$(CRYPT_SRC)
-!ENDIF
-
-DLL_SRC = $(DYNALOADER).c
-
-X2P_SRC = \
- ..\x2p\a2p.c \
- ..\x2p\hash.c \
- ..\x2p\str.c \
- ..\x2p\util.c \
- ..\x2p\walk.c
-
-CORE_NOCFG_H = \
- ..\av.h \
- ..\cop.h \
- ..\cv.h \
- ..\dosish.h \
- ..\embed.h \
- ..\form.h \
- ..\gv.h \
- ..\handy.h \
- ..\hv.h \
- ..\iperlsys.h \
- ..\mg.h \
- ..\nostdio.h \
- ..\op.h \
- ..\opcode.h \
- ..\perl.h \
- ..\perlapi.h \
- ..\perlsdio.h \
- ..\perlsfio.h \
- ..\perly.h \
- ..\pp.h \
- ..\proto.h \
- ..\regexp.h \
- ..\scope.h \
- ..\sv.h \
- ..\thread.h \
- ..\unixish.h \
- ..\utf8.h \
- ..\util.h \
- ..\warnings.h \
- ..\XSUB.h \
- ..\EXTERN.h \
- ..\perlvars.h \
- ..\intrpvar.h \
- ..\thrdvar.h \
- .\include\dirent.h \
- .\include\netdb.h \
- .\include\sys\socket.h \
- .\win32.h
-
-CORE_H = $(CORE_NOCFG_H) .\config.h
-
-MICROCORE_OBJ = $(MICROCORE_SRC:.c=.obj)
-CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)
-WIN32_OBJ = $(WIN32_SRC:.c=.obj)
-MINICORE_OBJ = $(MICROCORE_OBJ:..\=.\mini\) \
- $(MINIDIR)\miniperlmain$(o) \
- $(MINIDIR)\perlio$(o)
-MINIWIN32_OBJ = $(WIN32_OBJ:.\=.\mini\)
-MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
-DLL_OBJ = $(DLL_SRC:.c=.obj)
-X2P_OBJ = $(X2P_SRC:.c=.obj)
-
-PERLDLL_OBJ = $(CORE_OBJ)
-PERLEXE_OBJ = perlmain$(o)
-
-PERLDLL_OBJ = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
-#PERLEXE_OBJ = $(PERLEXE_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
-
-!IF "$(USE_SETARGV)" != ""
-SETARGV_OBJ = setargv$(o)
-!ENDIF
-
-DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
- Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
- Sys/Hostname Storable
-STATIC_EXT = DynaLoader
-NONXS_EXT = Errno
-
-DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
-SOCKET = $(EXTDIR)\Socket\Socket
-FCNTL = $(EXTDIR)\Fcntl\Fcntl
-OPCODE = $(EXTDIR)\Opcode\Opcode
-SDBM_FILE = $(EXTDIR)\SDBM_File\SDBM_File
-IO = $(EXTDIR)\IO\IO
-POSIX = $(EXTDIR)\POSIX\POSIX
-ATTRS = $(EXTDIR)\attrs\attrs
-THREAD = $(EXTDIR)\Thread\Thread
-B = $(EXTDIR)\B\B
-RE = $(EXTDIR)\re\re
-DUMPER = $(EXTDIR)\Data\Dumper\Dumper
-ERRNO = $(EXTDIR)\Errno\Errno
-PEEK = $(EXTDIR)\Devel\Peek\Peek
-BYTELOADER = $(EXTDIR)\ByteLoader\ByteLoader
-DPROF = $(EXTDIR)\Devel\DProf\DProf
-GLOB = $(EXTDIR)\File\Glob\Glob
-HOSTNAME = $(EXTDIR)\Sys\Hostname\Hostname
-STORABLE = $(EXTDIR)\Storable\Storable
-
-SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll
-FCNTL_DLL = $(AUTODIR)\Fcntl\Fcntl.dll
-OPCODE_DLL = $(AUTODIR)\Opcode\Opcode.dll
-SDBM_FILE_DLL = $(AUTODIR)\SDBM_File\SDBM_File.dll
-IO_DLL = $(AUTODIR)\IO\IO.dll
-POSIX_DLL = $(AUTODIR)\POSIX\POSIX.dll
-ATTRS_DLL = $(AUTODIR)\attrs\attrs.dll
-THREAD_DLL = $(AUTODIR)\Thread\Thread.dll
-B_DLL = $(AUTODIR)\B\B.dll
-DUMPER_DLL = $(AUTODIR)\Data\Dumper\Dumper.dll
-PEEK_DLL = $(AUTODIR)\Devel\Peek\Peek.dll
-RE_DLL = $(AUTODIR)\re\re.dll
-BYTELOADER_DLL = $(AUTODIR)\ByteLoader\ByteLoader.dll
-DPROF_DLL = $(AUTODIR)\Devel\DProf\DProf.dll
-GLOB_DLL = $(AUTODIR)\File\Glob\Glob.dll
-HOSTNAME_DLL = $(AUTODIR)\Sys\Hostname\Hostname.dll
-STORABLE_DLL = $(AUTODIR)\Storable\Storable.dll
-
-ERRNO_PM = $(LIBDIR)\Errno.pm
-
-EXTENSION_C = \
- $(SOCKET).c \
- $(FCNTL).c \
- $(OPCODE).c \
- $(SDBM_FILE).c \
- $(IO).c \
- $(POSIX).c \
- $(ATTRS).c \
- $(THREAD).c \
- $(RE).c \
- $(DUMPER).c \
- $(PEEK).c \
- $(B).c \
- $(BYTELOADER).c \
- $(DPROF).c \
- $(GLOB).c \
- $(HOSTNAME).c \
- $(STORABLE).c
-
-EXTENSION_DLL = \
- $(SOCKET_DLL) \
- $(FCNTL_DLL) \
- $(OPCODE_DLL) \
- $(SDBM_FILE_DLL)\
- $(IO_DLL) \
- $(POSIX_DLL) \
- $(ATTRS_DLL) \
- $(DUMPER_DLL) \
- $(PEEK_DLL) \
- $(B_DLL) \
- $(RE_DLL) \
- $(THREAD_DLL) \
- $(BYTELOADER_DLL) \
- $(DPROF_DLL) \
- $(GLOB_DLL) \
- $(HOSTNAME_DLL) \
- $(STORABLE_DLL)
-
-EXTENSION_PM = \
- $(ERRNO_PM)
-
-POD2HTML = $(PODDIR)\pod2html
-POD2MAN = $(PODDIR)\pod2man
-POD2LATEX = $(PODDIR)\pod2latex
-POD2TEXT = $(PODDIR)\pod2text
-
-CFG_VARS = \
- "INST_DRV=$(INST_DRV)" \
- "INST_TOP=$(INST_TOP)" \
- "INST_VER=$(INST_VER)" \
- "INST_ARCH=$(INST_ARCH)" \
- "archname=$(ARCHNAME)" \
- "cc=$(CC)" \
- "ccflags=$(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)" \
- "cf_email=$(EMAIL)" \
- "d_crypt=$(D_CRYPT)" \
- "d_mymalloc=$(PERL_MALLOC)" \
- "libs=$(LIBFILES)" \
- "incpath=$(CCINCDIR:"=\")" \
- "libperl=$(PERLIMPLIB:..\=)" \
- "libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \
- "libc=$(LIBC)" \
- "make=nmake" \
- "static_ext=$(STATIC_EXT)" \
- "dynamic_ext=$(DYNAMIC_EXT)" \
- "nonxs_ext=$(NONXS_EXT)" \
- "use5005threads=$(USE_5005THREADS)" \
- "useithreads=$(USE_ITHREADS)" \
- "usethreads=$(USE_5005THREADS)" \
- "usemultiplicity=$(USE_MULTI)" \
- "LINK_FLAGS=$(LINK_FLAGS:"=\")" \
- "optimize=$(OPTIMIZE:"=\")"
-
-#
-# Top targets
-#
-
-all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \
- $(X2P) $(EXTENSION_DLL) $(EXTENSION_PM)
-
-$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
-
-#------------------------------------------------------------
-
-$(GLOBEXE) : perlglob$(o)
- $(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
- perlglob$(o) setargv$(o)
-
-perlglob$(o) : perlglob.c
-
-config.w32 : $(CFGSH_TMPL)
- copy $(CFGSH_TMPL) config.w32
-
-.\config.h : $(CFGH_TMPL)
- -del /f config.h
- copy $(CFGH_TMPL) config.h
-
-..\config.sh : config.w32 $(MINIPERL) config_sh.PL
- $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh
-
-# this target is for when changes to the main config.sh happen
-# edit config.{b,v,g}c and make this target once for each supported
-# compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
-regen_config_h:
- perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
- cd ..
- -del /f perl.exe
- perl configpm
- cd win32
- -del /f $(CFGH_TMPL)
- -mkdir $(COREDIR)
- -perl -I..\lib config_h.PL "INST_VER=$(INST_VER)"
- rename config.h $(CFGH_TMPL)
-
-$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
- cd .. && miniperl configpm
- if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
- $(XCOPY) ..\*.h $(COREDIR)\*.*
- $(XCOPY) *.h $(COREDIR)\*.*
- $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
- $(RCOPY) include $(COREDIR)\*.*
- $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
- || $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)
-
-$(MINIPERL) : $(MINIDIR) $(MINI_OBJ)
- $(LINK32) -subsystem:console -out:$@ @<<
- $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ)
-<<
-
-$(MINIDIR) :
- if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
-
-$(MINICORE_OBJ) : $(CORE_NOCFG_H)
- $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c
-
-$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
- $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c
-
-# -DPERL_IMPLICIT_SYS needs C++ for perllib.c
-# This is the only file that depends on perlhost.h, vmem.h, and vdir.h
-!IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef"
-perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
- $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
-!ENDIF
-
-# 1. we don't want to rebuild miniperl.exe when config.h changes
-# 2. we don't want to rebuild miniperl.exe with non-default config.h
-$(MINI_OBJ) : $(CORE_NOCFG_H)
-
-$(WIN32_OBJ) : $(CORE_H)
-$(CORE_OBJ) : $(CORE_H)
-$(DLL_OBJ) : $(CORE_H)
-$(X2P_OBJ) : $(CORE_H)
-
-perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
- $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \
- CCTYPE=$(CCTYPE) > perldll.def
-
-$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)
- $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @<<
- $(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES)
-<<
- $(XCOPY) $(PERLIMPLIB) $(COREDIR)
-
-$(MINIMOD) : $(MINIPERL) ..\minimod.pl
- cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
-
-..\x2p\a2p$(o) : ..\x2p\a2p.c
- $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
-
-..\x2p\hash$(o) : ..\x2p\hash.c
- $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
-
-..\x2p\str$(o) : ..\x2p\str.c
- $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
-
-..\x2p\util$(o) : ..\x2p\util.c
- $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
-
-..\x2p\walk$(o) : ..\x2p\walk.c
- $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
-
-$(X2P) : $(MINIPERL) $(X2P_OBJ)
- $(MINIPERL) ..\x2p\find2perl.PL
- $(MINIPERL) ..\x2p\s2p.PL
- $(LINK32) -subsystem:console -out:$@ @<<
- $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ)
-<<
-
-perlmain.c : runperl.c
- copy runperl.c perlmain.c
-
-perlmain$(o) : perlmain.c
- $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
-
-$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
- $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \
- $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
- copy $(PERLEXE) $(WPERLEXE)
- $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
- copy splittree.pl ..
- $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
-
-$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
- if not exist $(AUTODIR) mkdir $(AUTODIR)
- cd $(EXTDIR)\$(*B)
- ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
- ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
- cd ..\..\win32
- $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
- $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
- cd $(EXTDIR)\$(*B)
- $(XSUBPP) dl_win32.xs > $(*B).c
- cd ..\..\win32
-
-$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
- copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
-
-$(DUMPER_DLL): $(PERLEXE) $(DUMPER).xs
- cd $(EXTDIR)\Data\$(*B)
- ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\..\win32
-
-$(DPROF_DLL): $(PERLEXE) $(DPROF).xs
- cd $(EXTDIR)\Devel\$(*B)
- ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\..\win32
-
-$(GLOB_DLL): $(PERLEXE) $(GLOB).xs
- cd $(EXTDIR)\File\$(*B)
- ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\..\win32
-
-$(PEEK_DLL): $(PERLEXE) $(PEEK).xs
- cd $(EXTDIR)\Devel\$(*B)
- ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\..\win32
-
-$(RE_DLL): $(PERLEXE) $(RE).xs
- cd $(EXTDIR)\$(*B)
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\win32
-
-$(B_DLL): $(PERLEXE) $(B).xs
- cd $(EXTDIR)\$(*B)
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\win32
-
-$(THREAD_DLL): $(PERLEXE) $(THREAD).xs
- cd $(EXTDIR)\$(*B)
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\win32
-
-$(ATTRS_DLL): $(PERLEXE) $(ATTRS).xs
- cd $(EXTDIR)\$(*B)
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\win32
-
-$(POSIX_DLL): $(PERLEXE) $(POSIX).xs
- cd $(EXTDIR)\$(*B)
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\win32
-
-$(IO_DLL): $(PERLEXE) $(IO).xs
- cd $(EXTDIR)\$(*B)
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\win32
-
-$(SDBM_FILE_DLL) : $(PERLEXE) $(SDBM_FILE).xs
- cd $(EXTDIR)\$(*B)
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\win32
-
-$(FCNTL_DLL): $(PERLEXE) $(FCNTL).xs
- cd $(EXTDIR)\$(*B)
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\win32
-
-$(OPCODE_DLL): $(PERLEXE) $(OPCODE).xs
- cd $(EXTDIR)\$(*B)
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\win32
-
-$(SOCKET_DLL): $(PERLEXE) $(SOCKET).xs
- cd $(EXTDIR)\$(*B)
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\win32
-
-$(HOSTNAME_DLL): $(PERLEXE) $(HOSTNAME).xs
- cd $(EXTDIR)\Sys\$(*B)
- ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\..\win32
-
-$(BYTELOADER_DLL): $(PERLEXE) $(BYTELOADER).xs
- cd $(EXTDIR)\$(*B)
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\win32
-
-$(STORABLE_DLL): $(PERLEXE) $(STORABLE).xs
- cd $(EXTDIR)\$(*B)
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\win32
-
-$(ERRNO_PM): $(PERLEXE) $(ERRNO)_pm.PL
- cd $(EXTDIR)\$(*B)
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\win32
-
-doc: $(PERLEXE)
- $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
- --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \
- --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
-
-utils: $(PERLEXE) $(X2P)
- cd ..\utils
- $(MAKE) PERL=$(MINIPERL)
- cd ..\pod
- copy ..\README.amiga .\perlamiga.pod
- copy ..\README.cygwin .\perlcygwin.pod
- copy ..\README.dos .\perldos.pod
- copy ..\README.hpux .\perlhpux.pod
- copy ..\README.machten .\perlmachten.pod
- copy ..\README.os2 .\perlos2.pod
- copy ..\vms\perlvms.pod .\perlvms.pod
- copy ..\README.win32 .\perlwin32.pod
- $(MAKE) -f ..\win32\pod.mak converters
- cd ..\lib
- $(PERLEXE) lib_pm.PL
- cd ..\win32
- $(PERLEXE) $(PL2BAT) $(UTILS)
-
-distclean: clean
- -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
- $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD)
- -del /f *.def *.map
- -del /f $(EXTENSION_DLL) $(EXTENSION_PM)
- -del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm
- -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
- -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
- -del /f $(LIBDIR)\XSLoader.pm
- -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
- -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm
- -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
- -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
- -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm
- -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
- -del /f $(LIBDIR)\File\Glob.pm
- -del /f $(LIBDIR)\Storable.pm
- -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO
- -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread
- -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B
- -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data
- -del /f $(PODDIR)\*.html
- -del /f $(PODDIR)\*.bat
- cd ..\utils
- -del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc dprofpp
- -del /f *.bat
- cd ..\win32
- cd ..\x2p
- -del /f find2perl s2p
- -del /f *.bat
- cd ..\win32
- -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
- -del /f $(CONFIGPM)
- -del /f bin\*.bat
- cd $(EXTDIR)
- -del /s *.lib *.def *.map *.pdb *.bs Makefile *$(o) pm_to_blib
- cd ..\win32
- -if exist $(AUTODIR) rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR)
- -if exist $(COREDIR) rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR)
-
-install : all installbare installhtml
-
-installbare : utils
- $(PERLEXE) ..\installperl
- if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
- $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
- $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
-
-installhtml : doc
- $(RCOPY) html\*.* $(INST_HTML)\*.*
-
-inst_lib : $(CONFIGPM)
- copy splittree.pl ..
- $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
- $(RCOPY) ..\lib $(INST_LIB)\*.*
-
-minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils
- $(XCOPY) $(MINIPERL) ..\t\perl.exe
- $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
- attrib -r ..\t\*.*
- copy test ..\t
- cd ..\t
- $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
- cd ..\win32
-
-test-prep : all utils
- $(XCOPY) $(PERLEXE) ..\t\$(NULL)
- $(XCOPY) $(PERLDLL) ..\t\$(NULL)
- $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
-
-test : test-prep
- cd ..\t
- $(PERLEXE) -I..\lib harness
- cd ..\win32
-
-test-notty : test-prep
- set PERL_SKIP_TTY_TEST=1
- cd ..\t
- $(PERLEXE) -I..\lib harness
- cd ..\win32
-
-test-wide : test-prep
- set HARNESS_PERL_SWITCHES=-C
- cd ..\t
- $(PERLEXE) -I..\lib harness
- cd ..\win32
-
-test-wide-notty : test-prep
- set PERL_SKIP_TTY_TEST=1
- set HARNESS_PERL_SWITCHES=-C
- cd ..\t
- $(PERLEXE) -I..\lib harness
- cd ..\win32
-
-clean :
- -@erase miniperlmain$(o)
- -@erase $(MINIPERL)
- -@erase perlglob$(o)
- -@erase perlmain$(o)
- -@erase config.w32
- -@erase /f config.h
- -@erase $(GLOBEXE)
- -@erase $(PERLEXE)
- -@erase $(WPERLEXE)
- -@erase $(PERLDLL)
- -@erase $(CORE_OBJ)
- -if exist $(MINIDIR) rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR)
- -@erase $(WIN32_OBJ)
- -@erase $(DLL_OBJ)
- -@erase $(X2P_OBJ)
- -@erase ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res
- -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
- -@erase ..\x2p\*.exe ..\x2p\*.bat
- -@erase *.ilk
- -@erase *.pdb
-
-# Handy way to run perlbug -ok without having to install and run the
-# installed perlbug. We don't re-run the tests here - we trust the user.
-# Please *don't* use this unless all tests pass.
-# If you want to report test failures, use "nmake nok" instead.
-ok: utils
- $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
-
-okfile: utils
- $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
-
-nok: utils
- $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
-
-nokfile: utils
- $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok
+#\r
+# Makefile to build perl on Windows NT using Microsoft NMAKE.\r
+#\r
+# This is set up to build a perl.exe that runs off a shared library\r
+# (perl56.dll). Also makes individual DLLs for the XS extensions.\r
+#\r
+\r
+##\r
+## Make sure you read README.win32 *before* you mess with anything here!\r
+##\r
+\r
+##\r
+## Build configuration. Edit the values below to suit your needs.\r
+##\r
+\r
+#\r
+# Set these to wherever you want "nmake install" to put your\r
+# newly built perl.\r
+#\r
+INST_DRV = c:\r
+INST_TOP = $(INST_DRV)\perl\r
+\r
+#\r
+# Comment this out if you DON'T want your perl installation to be versioned.\r
+# This means that the new installation will overwrite any files from the\r
+# old installation at the same INST_TOP location. Leaving it enabled is\r
+# the safest route, as perl adds the extra version directory to all the\r
+# locations it installs files to. If you disable it, an alternative\r
+# versioned installation can be obtained by setting INST_TOP above to a\r
+# path that includes an arbitrary version string.\r
+#\r
+INST_VER = \5.6.0\r
+\r
+#\r
+# Comment this out if you DON'T want your perl installation to have\r
+# architecture specific components. This means that architecture-\r
+# specific files will be installed along with the architecture-neutral\r
+# files. Leaving it enabled is safer and more flexible, in case you\r
+# want to build multiple flavors of perl and install them together in\r
+# the same location. Commenting it out gives you a simpler\r
+# installation that is easier to understand for beginners.\r
+#\r
+INST_ARCH = \$(ARCHNAME)\r
+\r
+#\r
+# uncomment to enable multiple interpreters. This is need for fork()\r
+# emulation.\r
+#\r
+#USE_MULTI = define\r
+\r
+#\r
+# Beginnings of interpreter cloning/threads; still very incomplete.\r
+# This should be enabled to get the fork() emulation. This needs\r
+# USE_MULTI as well.\r
+#\r
+#USE_ITHREADS = define\r
+\r
+#\r
+# uncomment to enable the implicit "host" layer for all system calls\r
+# made by perl. This needs USE_MULTI above. This is also needed to\r
+# get fork().\r
+#\r
+#USE_IMP_SYS = define\r
+\r
+#\r
+# WARNING! This option is deprecated and will eventually go away (enable\r
+# USE_ITHREADS instead).\r
+#\r
+# uncomment to enable threads-capabilities. This is incompatible with\r
+# USE_ITHREADS, and is only here for people who may have come to rely\r
+# on the experimental Thread support that was in 5.005.\r
+#\r
+#USE_5005THREADS= define\r
+\r
+#\r
+# WARNING! This option is deprecated and will eventually go away (enable\r
+# USE_MULTI instead).\r
+#\r
+# uncomment next line if you want to use the PERL_OBJECT build option.\r
+# DO NOT ENABLE unless you have legacy code that relies on the C++\r
+# CPerlObj class that was available in 5.005. This cannot be enabled\r
+# if you ask for USE_5005THREADS above.\r
+#\r
+#USE_OBJECT = define\r
+\r
+#\r
+# uncomment one of the following lines if you are using either\r
+# Visual C++ 2.x or Visual C++ 6.x (aka Visual Studio 98)\r
+#\r
+#CCTYPE = MSVC20\r
+#CCTYPE = MSVC60\r
+\r
+#\r
+# uncomment next line if you want debug version of perl (big,slow)\r
+#\r
+#CFG = Debug\r
+\r
+#\r
+# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.\r
+# It has patches that fix known bugs in older versions of MSVCRT.DLL.\r
+# This currently requires VC 5.0 with Service Pack 3 or later.\r
+# Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/\r
+# and follow the directions in the package to install.\r
+#\r
+# Not recommended if you have VC 6.x and you're not running Windows 9x.\r
+#\r
+#USE_PERLCRT = define\r
+\r
+#\r
+# uncomment to enable linking with setargv.obj under the Visual C\r
+# compiler. Setting this options enables perl to expand wildcards in\r
+# arguments, but it may be harder to use alternate methods like\r
+# File::DosGlob that are more powerful. This option is supported only with\r
+# Visual C.\r
+#\r
+#USE_SETARGV = define\r
+\r
+#\r
+# if you have the source for des_fcrypt(), uncomment this and make sure the\r
+# file exists (see README.win32). File should be located in the same\r
+# directory as this file.\r
+#\r
+#CRYPT_SRC = fcrypt.c\r
+\r
+#\r
+# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a\r
+# library, uncomment this, and make sure the library exists (see README.win32)\r
+# Specify the full pathname of the library.\r
+#\r
+#CRYPT_LIB = fcrypt.lib\r
+\r
+#\r
+# set this if you wish to use perl's malloc\r
+# WARNING: Turning this on/off WILL break binary compatibility with extensions\r
+# you may have compiled with/without it. Be prepared to recompile all\r
+# extensions if you change the default. Currently, this cannot be enabled\r
+# if you ask for USE_IMP_SYS above.\r
+#\r
+#PERL_MALLOC = define\r
+\r
+#\r
+# set the install locations of the compiler include/libraries\r
+# Running VCVARS32.BAT is *required* when using Visual C.\r
+# Some versions of Visual C don't define MSVCDIR in the environment,\r
+# so you may have to set CCHOME explicitly (spaces in the path name should\r
+# not be quoted)\r
+#\r
+#CCHOME = f:\msvc20\r
+CCHOME = $(MSVCDIR)\r
+CCINCDIR = $(CCHOME)\include\r
+CCLIBDIR = $(CCHOME)\lib\r
+\r
+#\r
+# Additional compiler flags can be specified here.\r
+#\r
+\r
+#\r
+# This should normally be disabled. Adding -DPERL_POLLUTE enables support\r
+# for old symbols by default, at the expense of extreme pollution. You most\r
+# probably just want to build modules that won't compile with\r
+# perl Makefile.PL POLLUTE=1\r
+# instead of enabling this. Please report such modules to the respective\r
+# authors.\r
+#\r
+#BUILDOPT = $(BUILDOPT) -DPERL_POLLUTE\r
+\r
+#\r
+# This should normally be disabled. Enabling it will disable the File::Glob\r
+# implementation of CORE::glob.\r
+#\r
+#BUILDOPT = $(BUILDOPT) -DPERL_EXTERNAL_GLOB\r
+\r
+#\r
+# This should normally be disabled. Enabling it causes perl to read scripts\r
+# in text mode (which is the 5.005 behavior) and will break ByteLoader.\r
+#BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS\r
+\r
+#\r
+# specify semicolon-separated list of extra directories that modules will\r
+# look for libraries (spaces in path names need not be quoted)\r
+#\r
+EXTRALIBDIRS =\r
+\r
+#\r
+# set this to your email address (perl will guess a value from\r
+# from your loginname and your hostname, which may not be right)\r
+#\r
+#EMAIL =\r
+\r
+##\r
+## Build configuration ends.\r
+##\r
+\r
+##################### CHANGE THESE ONLY IF YOU MUST #####################\r
+\r
+!IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""\r
+D_CRYPT = undef\r
+!ELSE\r
+D_CRYPT = define\r
+CRYPT_FLAG = -DHAVE_DES_FCRYPT\r
+!ENDIF\r
+\r
+!IF "$(USE_OBJECT)" == "define"\r
+PERL_MALLOC = undef\r
+USE_5005THREADS = undef\r
+USE_MULTI = undef\r
+USE_IMP_SYS = define\r
+!ENDIF\r
+\r
+!IF "$(PERL_MALLOC)" == ""\r
+PERL_MALLOC = undef\r
+!ENDIF\r
+\r
+!IF "$(USE_5005THREADS)" == ""\r
+USE_5005THREADS = undef\r
+!ENDIF\r
+\r
+!IF "$(USE_5005THREADS)" == "define"\r
+USE_ITHREADS = undef\r
+!ENDIF\r
+\r
+!IF "$(USE_IMP_SYS)" == "define"\r
+PERL_MALLOC = undef\r
+!ENDIF\r
+\r
+!IF "$(USE_MULTI)" == ""\r
+USE_MULTI = undef\r
+!ENDIF\r
+\r
+!IF "$(USE_OBJECT)" == ""\r
+USE_OBJECT = undef\r
+!ENDIF\r
+\r
+!IF "$(USE_ITHREADS)" == ""\r
+USE_ITHREADS = undef\r
+!ENDIF\r
+\r
+!IF "$(USE_IMP_SYS)" == ""\r
+USE_IMP_SYS = undef\r
+!ENDIF\r
+\r
+!IF "$(USE_PERLCRT)" == ""\r
+USE_PERLCRT = undef\r
+!ENDIF\r
+\r
+!IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" == "defineundefundefundef"\r
+USE_MULTI = define\r
+!ENDIF\r
+\r
+!IF "$(USE_ITHREADS)$(USE_MULTI)$(USE_OBJECT)" == "defineundefundef"\r
+USE_MULTI = define\r
+USE_5005THREADS = undef\r
+!ENDIF\r
+\r
+!IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef"\r
+BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT\r
+!ENDIF\r
+\r
+!IF "$(USE_IMP_SYS)" != "undef"\r
+BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS\r
+!ENDIF\r
+\r
+!IF "$(PROCESSOR_ARCHITECTURE)" == ""\r
+PROCESSOR_ARCHITECTURE = x86\r
+!ENDIF\r
+\r
+!IF "$(USE_OBJECT)" == "define"\r
+ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-object\r
+!ELSE\r
+!IF "$(USE_5005THREADS)" == "define"\r
+ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread\r
+!ELSE\r
+!IF "$(USE_MULTI)" == "define"\r
+ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi\r
+!ELSE\r
+ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)\r
+!ENDIF\r
+!ENDIF\r
+!ENDIF\r
+\r
+!IF "$(USE_ITHREADS)" == "define"\r
+ARCHNAME = $(ARCHNAME)-thread\r
+!ENDIF\r
+\r
+# Visual Studio 98 specific\r
+!IF "$(CCTYPE)" == "MSVC60"\r
+\r
+# VC 6.0 can load the socket dll on demand. Makes the test suite\r
+# run in about 10% less time.\r
+DELAYLOAD = -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib \r
+\r
+# VC 6.0 seems capable of compiling perl correctly with optimizations\r
+# enabled. Anything earlier fails tests.\r
+!IF "$(CFG)" == ""\r
+CFG = Optimize\r
+!ENDIF\r
+!ENDIF\r
+\r
+ARCHDIR = ..\lib\$(ARCHNAME)\r
+COREDIR = ..\lib\CORE\r
+AUTODIR = ..\lib\auto\r
+LIBDIR = ..\lib\r
+EXTDIR = ..\ext\r
+PODDIR = ..\pod\r
+EXTUTILSDIR = $(LIBDIR)\ExtUtils\r
+\r
+#\r
+INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin\r
+INST_BIN = $(INST_SCRIPT)$(INST_ARCH)\r
+INST_LIB = $(INST_TOP)$(INST_VER)\lib\r
+INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)\r
+INST_COREDIR = $(INST_ARCHLIB)\CORE\r
+INST_POD = $(INST_LIB)\pod\r
+INST_HTML = $(INST_POD)\html\r
+\r
+#\r
+# Programs to compile, build .lib files and link\r
+#\r
+\r
+CC = cl\r
+LINK32 = link\r
+LIB32 = $(LINK32) -lib\r
+RSC = rc\r
+\r
+#\r
+# Options\r
+#\r
+\r
+INCLUDES = -I$(COREDIR) -I.\include -I. -I..\r
+#PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX \r
+DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)\r
+LOCDEFS = -DPERLDLL -DPERL_CORE\r
+SUBSYS = console\r
+CXX_FLAG = -TP -GX\r
+\r
+!IF "$(USE_PERLCRT)" != "define"\r
+LIBC = msvcrt.lib\r
+!ELSE\r
+LIBC = PerlCRT.lib\r
+!ENDIF\r
+\r
+PERLEXE_RES =\r
+PERLDLL_RES =\r
+\r
+!IF "$(CFG)" == "Debug"\r
+! IF "$(CCTYPE)" == "MSVC20"\r
+OPTIMIZE = -Od -MD -Z7 -DDEBUGGING\r
+! ELSE\r
+OPTIMIZE = -Od -MD -Zi -DDEBUGGING\r
+! ENDIF\r
+LINK_DBG = -debug -pdb:none\r
+!ELSE\r
+! IF "$(CFG)" == "Optimize"\r
+# -O1 yields smaller code, which turns out to be faster than -O2\r
+#OPTIMIZE = -O2 -MD -DNDEBUG\r
+OPTIMIZE = -O1 -MD -DNDEBUG\r
+! ELSE\r
+OPTIMIZE = -Od -MD -DNDEBUG\r
+! ENDIF\r
+LINK_DBG = -release\r
+!ENDIF\r
+\r
+!IF "$(USE_OBJECT)" == "define"\r
+OPTIMIZE = $(OPTIMIZE) $(CXX_FLAG)\r
+BUILDOPT = $(BUILDOPT) -DPERL_OBJECT\r
+!ENDIF\r
+\r
+!IF "$(USE_PERLCRT)" != "define"\r
+BUILDOPT = $(BUILDOPT) -DPERL_MSVCRT_READFIX\r
+!ENDIF\r
+\r
+LIBBASEFILES = $(CRYPT_LIB) \\r
+ oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \\r
+ comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \\r
+ netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \\r
+ version.lib odbc32.lib odbccp32.lib\r
+\r
+# we add LIBC here, since we may be using PerlCRT.dll\r
+LIBFILES = $(LIBBASEFILES) $(LIBC)\r
+\r
+CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \\r
+ $(PCHFLAGS) $(OPTIMIZE)\r
+LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \\r
+ -libpath:"$(INST_COREDIR)" \\r
+ -machine:$(PROCESSOR_ARCHITECTURE)\r
+OBJOUT_FLAG = -Fo\r
+EXEOUT_FLAG = -Fe\r
+\r
+CFLAGS_O = $(CFLAGS) $(BUILDOPT)\r
+\r
+#################### do not edit below this line #######################\r
+############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############\r
+\r
+o = .obj\r
+\r
+#\r
+# Rules\r
+# \r
+\r
+.SUFFIXES : .c $(o) .dll .lib .exe .rc .res\r
+\r
+.c$(o):\r
+ $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<\r
+\r
+.y.c:\r
+ $(NOOP)\r
+\r
+$(o).dll:\r
+ $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \\r
+ -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL) \r
+\r
+.rc.res:\r
+ $(RSC) -i.. $<\r
+\r
+#\r
+# various targets\r
+PERLIMPLIB = ..\perl56.lib\r
+PERLDLL = ..\perl56.dll\r
+\r
+MINIPERL = ..\miniperl.exe\r
+MINIDIR = .\mini\r
+PERLEXE = ..\perl.exe\r
+WPERLEXE = ..\wperl.exe\r
+GLOBEXE = ..\perlglob.exe\r
+CONFIGPM = ..\lib\Config.pm\r
+MINIMOD = ..\lib\ExtUtils\Miniperl.pm\r
+X2P = ..\x2p\a2p.exe\r
+\r
+PL2BAT = bin\pl2bat.pl\r
+GLOBBAT = bin\perlglob.bat\r
+\r
+UTILS = \\r
+ ..\utils\h2ph \\r
+ ..\utils\splain \\r
+ ..\utils\dprofpp \\r
+ ..\utils\perlbug \\r
+ ..\utils\pl2pm \\r
+ ..\utils\c2ph \\r
+ ..\utils\h2xs \\r
+ ..\utils\perldoc \\r
+ ..\utils\perlcc \\r
+ ..\pod\checkpods \\r
+ ..\pod\pod2html \\r
+ ..\pod\pod2latex \\r
+ ..\pod\pod2man \\r
+ ..\pod\pod2text \\r
+ ..\pod\pod2usage \\r
+ ..\pod\podchecker \\r
+ ..\pod\podselect \\r
+ ..\x2p\find2perl \\r
+ ..\x2p\s2p \\r
+ bin\exetype.pl \\r
+ bin\runperl.pl \\r
+ bin\pl2bat.pl \\r
+ bin\perlglob.pl \\r
+ bin\search.pl\r
+\r
+MAKE = nmake -nologo\r
+\r
+CFGSH_TMPL = config.vc\r
+CFGH_TMPL = config_H.vc\r
+\r
+XCOPY = xcopy /f /r /i /d\r
+RCOPY = xcopy /f /r /i /e /d\r
+NOOP = @echo\r
+NULL =\r
+\r
+#\r
+# filenames given to xsubpp must have forward slashes (since it puts\r
+# full pathnames in #line strings)\r
+XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \\r
+ -C++ -prototypes\r
+\r
+MICROCORE_SRC = \\r
+ ..\av.c \\r
+ ..\deb.c \\r
+ ..\doio.c \\r
+ ..\doop.c \\r
+ ..\dump.c \\r
+ ..\globals.c \\r
+ ..\gv.c \\r
+ ..\hv.c \\r
+ ..\mg.c \\r
+ ..\op.c \\r
+ ..\perl.c \\r
+ ..\perlapi.c \\r
+ ..\perly.c \\r
+ ..\pp.c \\r
+ ..\pp_ctl.c \\r
+ ..\pp_hot.c \\r
+ ..\pp_sys.c \\r
+ ..\regcomp.c \\r
+ ..\regexec.c \\r
+ ..\run.c \\r
+ ..\scope.c \\r
+ ..\sv.c \\r
+ ..\taint.c \\r
+ ..\toke.c \\r
+ ..\universal.c \\r
+ ..\utf8.c \\r
+ ..\util.c \\r
+ ..\xsutils.c\r
+\r
+EXTRACORE_SRC = $(EXTRACORE_SRC) perllib.c\r
+\r
+!IF "$(PERL_MALLOC)" == "define"\r
+EXTRACORE_SRC = $(EXTRACORE_SRC) ..\malloc.c\r
+!ENDIF\r
+\r
+!IF "$(USE_OBJECT)" != "define"\r
+EXTRACORE_SRC = $(EXTRACORE_SRC) ..\perlio.c\r
+!ENDIF\r
+\r
+WIN32_SRC = \\r
+ .\win32.c \\r
+ .\win32sck.c \\r
+ .\win32thread.c \r
+\r
+!IF "$(CRYPT_SRC)" != ""\r
+WIN32_SRC = $(WIN32_SRC) .\$(CRYPT_SRC)\r
+!ENDIF\r
+\r
+DLL_SRC = $(DYNALOADER).c\r
+\r
+X2P_SRC = \\r
+ ..\x2p\a2p.c \\r
+ ..\x2p\hash.c \\r
+ ..\x2p\str.c \\r
+ ..\x2p\util.c \\r
+ ..\x2p\walk.c\r
+\r
+CORE_NOCFG_H = \\r
+ ..\av.h \\r
+ ..\cop.h \\r
+ ..\cv.h \\r
+ ..\dosish.h \\r
+ ..\embed.h \\r
+ ..\form.h \\r
+ ..\gv.h \\r
+ ..\handy.h \\r
+ ..\hv.h \\r
+ ..\iperlsys.h \\r
+ ..\mg.h \\r
+ ..\nostdio.h \\r
+ ..\op.h \\r
+ ..\opcode.h \\r
+ ..\perl.h \\r
+ ..\perlapi.h \\r
+ ..\perlsdio.h \\r
+ ..\perlsfio.h \\r
+ ..\perly.h \\r
+ ..\pp.h \\r
+ ..\proto.h \\r
+ ..\regexp.h \\r
+ ..\scope.h \\r
+ ..\sv.h \\r
+ ..\thread.h \\r
+ ..\unixish.h \\r
+ ..\utf8.h \\r
+ ..\util.h \\r
+ ..\warnings.h \\r
+ ..\XSUB.h \\r
+ ..\EXTERN.h \\r
+ ..\perlvars.h \\r
+ ..\intrpvar.h \\r
+ ..\thrdvar.h \\r
+ .\include\dirent.h \\r
+ .\include\netdb.h \\r
+ .\include\sys\socket.h \\r
+ .\win32.h\r
+\r
+CORE_H = $(CORE_NOCFG_H) .\config.h\r
+\r
+MICROCORE_OBJ = $(MICROCORE_SRC:.c=.obj)\r
+CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)\r
+WIN32_OBJ = $(WIN32_SRC:.c=.obj)\r
+MINICORE_OBJ = $(MICROCORE_OBJ:..\=.\mini\) \\r
+ $(MINIDIR)\miniperlmain$(o) \\r
+ $(MINIDIR)\perlio$(o)\r
+MINIWIN32_OBJ = $(WIN32_OBJ:.\=.\mini\)\r
+MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)\r
+DLL_OBJ = $(DLL_SRC:.c=.obj)\r
+X2P_OBJ = $(X2P_SRC:.c=.obj)\r
+\r
+PERLDLL_OBJ = $(CORE_OBJ)\r
+PERLEXE_OBJ = perlmain$(o)\r
+\r
+PERLDLL_OBJ = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)\r
+#PERLEXE_OBJ = $(PERLEXE_OBJ) $(WIN32_OBJ) $(DLL_OBJ)\r
+\r
+!IF "$(USE_SETARGV)" != ""\r
+SETARGV_OBJ = setargv$(o)\r
+!ENDIF\r
+\r
+DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \\r
+ Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \\r
+ Sys/Hostname Storable\r
+STATIC_EXT = DynaLoader\r
+NONXS_EXT = Errno\r
+\r
+DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader\r
+SOCKET = $(EXTDIR)\Socket\Socket\r
+FCNTL = $(EXTDIR)\Fcntl\Fcntl\r
+OPCODE = $(EXTDIR)\Opcode\Opcode\r
+SDBM_FILE = $(EXTDIR)\SDBM_File\SDBM_File\r
+IO = $(EXTDIR)\IO\IO\r
+POSIX = $(EXTDIR)\POSIX\POSIX\r
+ATTRS = $(EXTDIR)\attrs\attrs\r
+THREAD = $(EXTDIR)\Thread\Thread\r
+B = $(EXTDIR)\B\B\r
+RE = $(EXTDIR)\re\re\r
+DUMPER = $(EXTDIR)\Data\Dumper\Dumper\r
+ERRNO = $(EXTDIR)\Errno\Errno\r
+PEEK = $(EXTDIR)\Devel\Peek\Peek\r
+BYTELOADER = $(EXTDIR)\ByteLoader\ByteLoader\r
+DPROF = $(EXTDIR)\Devel\DProf\DProf\r
+GLOB = $(EXTDIR)\File\Glob\Glob\r
+HOSTNAME = $(EXTDIR)\Sys\Hostname\Hostname\r
+STORABLE = $(EXTDIR)\Storable\Storable\r
+\r
+SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll\r
+FCNTL_DLL = $(AUTODIR)\Fcntl\Fcntl.dll\r
+OPCODE_DLL = $(AUTODIR)\Opcode\Opcode.dll\r
+SDBM_FILE_DLL = $(AUTODIR)\SDBM_File\SDBM_File.dll\r
+IO_DLL = $(AUTODIR)\IO\IO.dll\r
+POSIX_DLL = $(AUTODIR)\POSIX\POSIX.dll\r
+ATTRS_DLL = $(AUTODIR)\attrs\attrs.dll\r
+THREAD_DLL = $(AUTODIR)\Thread\Thread.dll\r
+B_DLL = $(AUTODIR)\B\B.dll\r
+DUMPER_DLL = $(AUTODIR)\Data\Dumper\Dumper.dll\r
+PEEK_DLL = $(AUTODIR)\Devel\Peek\Peek.dll\r
+RE_DLL = $(AUTODIR)\re\re.dll\r
+BYTELOADER_DLL = $(AUTODIR)\ByteLoader\ByteLoader.dll\r
+DPROF_DLL = $(AUTODIR)\Devel\DProf\DProf.dll\r
+GLOB_DLL = $(AUTODIR)\File\Glob\Glob.dll\r
+HOSTNAME_DLL = $(AUTODIR)\Sys\Hostname\Hostname.dll\r
+STORABLE_DLL = $(AUTODIR)\Storable\Storable.dll\r
+\r
+ERRNO_PM = $(LIBDIR)\Errno.pm\r
+\r
+EXTENSION_C = \\r
+ $(SOCKET).c \\r
+ $(FCNTL).c \\r
+ $(OPCODE).c \\r
+ $(SDBM_FILE).c \\r
+ $(IO).c \\r
+ $(POSIX).c \\r
+ $(ATTRS).c \\r
+ $(THREAD).c \\r
+ $(RE).c \\r
+ $(DUMPER).c \\r
+ $(PEEK).c \\r
+ $(B).c \\r
+ $(BYTELOADER).c \\r
+ $(DPROF).c \\r
+ $(GLOB).c \\r
+ $(HOSTNAME).c \\r
+ $(STORABLE).c\r
+\r
+EXTENSION_DLL = \\r
+ $(SOCKET_DLL) \\r
+ $(FCNTL_DLL) \\r
+ $(OPCODE_DLL) \\r
+ $(SDBM_FILE_DLL)\\r
+ $(IO_DLL) \\r
+ $(POSIX_DLL) \\r
+ $(ATTRS_DLL) \\r
+ $(DUMPER_DLL) \\r
+ $(PEEK_DLL) \\r
+ $(B_DLL) \\r
+ $(RE_DLL) \\r
+ $(THREAD_DLL) \\r
+ $(BYTELOADER_DLL) \\r
+ $(DPROF_DLL) \\r
+ $(GLOB_DLL) \\r
+ $(HOSTNAME_DLL) \\r
+ $(STORABLE_DLL)\r
+\r
+EXTENSION_PM = \\r
+ $(ERRNO_PM)\r
+\r
+POD2HTML = $(PODDIR)\pod2html\r
+POD2MAN = $(PODDIR)\pod2man\r
+POD2LATEX = $(PODDIR)\pod2latex\r
+POD2TEXT = $(PODDIR)\pod2text\r
+\r
+CFG_VARS = \\r
+ "INST_DRV=$(INST_DRV)" \\r
+ "INST_TOP=$(INST_TOP)" \\r
+ "INST_VER=$(INST_VER)" \\r
+ "INST_ARCH=$(INST_ARCH)" \\r
+ "archname=$(ARCHNAME)" \\r
+ "cc=$(CC)" \\r
+ "ccflags=$(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)" \\r
+ "cf_email=$(EMAIL)" \\r
+ "d_crypt=$(D_CRYPT)" \\r
+ "d_mymalloc=$(PERL_MALLOC)" \\r
+ "libs=$(LIBFILES)" \\r
+ "incpath=$(CCINCDIR:"=\")" \\r
+ "libperl=$(PERLIMPLIB:..\=)" \\r
+ "libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \\r
+ "libc=$(LIBC)" \\r
+ "make=nmake" \\r
+ "static_ext=$(STATIC_EXT)" \\r
+ "dynamic_ext=$(DYNAMIC_EXT)" \\r
+ "nonxs_ext=$(NONXS_EXT)" \\r
+ "use5005threads=$(USE_5005THREADS)" \\r
+ "useithreads=$(USE_ITHREADS)" \\r
+ "usethreads=$(USE_5005THREADS)" \\r
+ "usemultiplicity=$(USE_MULTI)" \\r
+ "LINK_FLAGS=$(LINK_FLAGS:"=\")" \\r
+ "optimize=$(OPTIMIZE:"=\")"\r
+\r
+#\r
+# Top targets\r
+#\r
+\r
+all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \\r
+ $(X2P) $(EXTENSION_DLL) $(EXTENSION_PM)\r
+\r
+$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c\r
+\r
+#------------------------------------------------------------\r
+\r
+$(GLOBEXE) : perlglob$(o)\r
+ $(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \\r
+ perlglob$(o) setargv$(o) \r
+\r
+perlglob$(o) : perlglob.c\r
+\r
+config.w32 : $(CFGSH_TMPL)\r
+ copy $(CFGSH_TMPL) config.w32\r
+\r
+.\config.h : $(CFGH_TMPL)\r
+ -del /f config.h\r
+ copy $(CFGH_TMPL) config.h\r
+\r
+..\config.sh : config.w32 $(MINIPERL) config_sh.PL\r
+ $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh\r
+\r
+# this target is for when changes to the main config.sh happen\r
+# edit config.{b,v,g}c and make this target once for each supported\r
+# compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)\r
+regen_config_h:\r
+ perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh\r
+ cd ..\r
+ -del /f perl.exe\r
+ perl configpm\r
+ cd win32\r
+ -del /f $(CFGH_TMPL)\r
+ -mkdir $(COREDIR)\r
+ -perl -I..\lib config_h.PL "INST_VER=$(INST_VER)"\r
+ rename config.h $(CFGH_TMPL)\r
+\r
+$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl\r
+ cd .. && miniperl configpm\r
+ if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)\r
+ $(XCOPY) ..\*.h $(COREDIR)\*.*\r
+ $(XCOPY) *.h $(COREDIR)\*.*\r
+ $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*\r
+ $(RCOPY) include $(COREDIR)\*.*\r
+ $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \\r
+ || $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)\r
+\r
+$(MINIPERL) : $(MINIDIR) $(MINI_OBJ)\r
+ $(LINK32) -subsystem:console -out:$@ @<<\r
+ $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ)\r
+<<\r
+\r
+$(MINIDIR) :\r
+ if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"\r
+\r
+$(MINICORE_OBJ) : $(CORE_NOCFG_H)\r
+ $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c\r
+\r
+$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)\r
+ $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c\r
+\r
+# -DPERL_IMPLICIT_SYS needs C++ for perllib.c\r
+# This is the only file that depends on perlhost.h, vmem.h, and vdir.h\r
+!IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef"\r
+perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h\r
+ $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c\r
+!ENDIF\r
+\r
+# 1. we don't want to rebuild miniperl.exe when config.h changes\r
+# 2. we don't want to rebuild miniperl.exe with non-default config.h\r
+$(MINI_OBJ) : $(CORE_NOCFG_H)\r
+\r
+$(WIN32_OBJ) : $(CORE_H)\r
+$(CORE_OBJ) : $(CORE_H)\r
+$(DLL_OBJ) : $(CORE_H)\r
+$(X2P_OBJ) : $(CORE_H)\r
+\r
+perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl\r
+ $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \\r
+ CCTYPE=$(CCTYPE) > perldll.def\r
+\r
+$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)\r
+ $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @<<\r
+ $(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES)\r
+<<\r
+ $(XCOPY) $(PERLIMPLIB) $(COREDIR)\r
+\r
+$(MINIMOD) : $(MINIPERL) ..\minimod.pl\r
+ cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm\r
+\r
+..\x2p\a2p$(o) : ..\x2p\a2p.c\r
+ $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c\r
+\r
+..\x2p\hash$(o) : ..\x2p\hash.c\r
+ $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c\r
+\r
+..\x2p\str$(o) : ..\x2p\str.c\r
+ $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c\r
+\r
+..\x2p\util$(o) : ..\x2p\util.c\r
+ $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c\r
+\r
+..\x2p\walk$(o) : ..\x2p\walk.c\r
+ $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c\r
+\r
+$(X2P) : $(MINIPERL) $(X2P_OBJ)\r
+ $(MINIPERL) ..\x2p\find2perl.PL\r
+ $(MINIPERL) ..\x2p\s2p.PL\r
+ $(LINK32) -subsystem:console -out:$@ @<<\r
+ $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ)\r
+<<\r
+\r
+perlmain.c : runperl.c \r
+ copy runperl.c perlmain.c\r
+\r
+perlmain$(o) : perlmain.c\r
+ $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c\r
+\r
+$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)\r
+ $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \\r
+ $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)\r
+ copy $(PERLEXE) $(WPERLEXE)\r
+ $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS\r
+ copy splittree.pl .. \r
+ $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)\r
+\r
+$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)\r
+ if not exist $(AUTODIR) mkdir $(AUTODIR)\r
+ cd $(EXTDIR)\$(*B)\r
+ ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL\r
+ ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL\r
+ cd ..\..\win32\r
+ $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)\r
+ $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)\r
+ cd $(EXTDIR)\$(*B)\r
+ $(XSUBPP) dl_win32.xs > $(*B).c\r
+ cd ..\..\win32\r
+\r
+$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs\r
+ copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs\r
+\r
+$(DUMPER_DLL): $(PERLEXE) $(DUMPER).xs\r
+ cd $(EXTDIR)\Data\$(*B)\r
+ ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl\r
+ $(MAKE)\r
+ cd ..\..\..\win32\r
+\r
+$(DPROF_DLL): $(PERLEXE) $(DPROF).xs\r
+ cd $(EXTDIR)\Devel\$(*B)\r
+ ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl\r
+ $(MAKE)\r
+ cd ..\..\..\win32\r
+\r
+$(GLOB_DLL): $(PERLEXE) $(GLOB).xs\r
+ cd $(EXTDIR)\File\$(*B)\r
+ ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl\r
+ $(MAKE)\r
+ cd ..\..\..\win32\r
+\r
+$(PEEK_DLL): $(PERLEXE) $(PEEK).xs\r
+ cd $(EXTDIR)\Devel\$(*B)\r
+ ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl\r
+ $(MAKE)\r
+ cd ..\..\..\win32\r
+\r
+$(RE_DLL): $(PERLEXE) $(RE).xs\r
+ cd $(EXTDIR)\$(*B)\r
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl\r
+ $(MAKE)\r
+ cd ..\..\win32\r
+\r
+$(B_DLL): $(PERLEXE) $(B).xs\r
+ cd $(EXTDIR)\$(*B)\r
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl\r
+ $(MAKE)\r
+ cd ..\..\win32\r
+\r
+$(THREAD_DLL): $(PERLEXE) $(THREAD).xs\r
+ cd $(EXTDIR)\$(*B)\r
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl\r
+ $(MAKE)\r
+ cd ..\..\win32\r
+\r
+$(ATTRS_DLL): $(PERLEXE) $(ATTRS).xs\r
+ cd $(EXTDIR)\$(*B)\r
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl\r
+ $(MAKE)\r
+ cd ..\..\win32\r
+\r
+$(POSIX_DLL): $(PERLEXE) $(POSIX).xs\r
+ cd $(EXTDIR)\$(*B)\r
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl\r
+ $(MAKE)\r
+ cd ..\..\win32\r
+\r
+$(IO_DLL): $(PERLEXE) $(IO).xs\r
+ cd $(EXTDIR)\$(*B)\r
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl\r
+ $(MAKE)\r
+ cd ..\..\win32\r
+\r
+$(SDBM_FILE_DLL) : $(PERLEXE) $(SDBM_FILE).xs\r
+ cd $(EXTDIR)\$(*B)\r
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl\r
+ $(MAKE)\r
+ cd ..\..\win32\r
+\r
+$(FCNTL_DLL): $(PERLEXE) $(FCNTL).xs\r
+ cd $(EXTDIR)\$(*B)\r
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl\r
+ $(MAKE)\r
+ cd ..\..\win32\r
+\r
+$(OPCODE_DLL): $(PERLEXE) $(OPCODE).xs\r
+ cd $(EXTDIR)\$(*B)\r
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl\r
+ $(MAKE)\r
+ cd ..\..\win32\r
+\r
+$(SOCKET_DLL): $(PERLEXE) $(SOCKET).xs\r
+ cd $(EXTDIR)\$(*B)\r
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl\r
+ $(MAKE)\r
+ cd ..\..\win32\r
+\r
+$(HOSTNAME_DLL): $(PERLEXE) $(HOSTNAME).xs\r
+ cd $(EXTDIR)\Sys\$(*B)\r
+ ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl\r
+ $(MAKE)\r
+ cd ..\..\..\win32\r
+\r
+$(BYTELOADER_DLL): $(PERLEXE) $(BYTELOADER).xs\r
+ cd $(EXTDIR)\$(*B)\r
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl\r
+ $(MAKE)\r
+ cd ..\..\win32\r
+\r
+$(STORABLE_DLL): $(PERLEXE) $(STORABLE).xs\r
+ cd $(EXTDIR)\$(*B)\r
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl\r
+ $(MAKE)\r
+ cd ..\..\win32\r
+\r
+$(ERRNO_PM): $(PERLEXE) $(ERRNO)_pm.PL\r
+ cd $(EXTDIR)\$(*B)\r
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl\r
+ $(MAKE)\r
+ cd ..\..\win32\r
+\r
+doc: $(PERLEXE)\r
+ $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \\r
+ --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \\r
+ --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse\r
+\r
+utils: $(PERLEXE) $(X2P)\r
+ cd ..\utils\r
+ $(MAKE) PERL=$(MINIPERL)\r
+ cd ..\pod\r
+ copy ..\README.amiga .\perlamiga.pod\r
+ copy ..\README.cygwin .\perlcygwin.pod\r
+ copy ..\README.dos .\perldos.pod\r
+ copy ..\README.hpux .\perlhpux.pod\r
+ copy ..\README.machten .\perlmachten.pod\r
+ copy ..\README.os2 .\perlos2.pod\r
+ copy ..\vms\perlvms.pod .\perlvms.pod\r
+ copy ..\README.win32 .\perlwin32.pod\r
+ $(MAKE) -f ..\win32\pod.mak converters\r
+ cd ..\lib\r
+ $(PERLEXE) lib_pm.PL\r
+ cd ..\win32\r
+ $(PERLEXE) $(PL2BAT) $(UTILS)\r
+\r
+distclean: clean\r
+ -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \\r
+ $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD)\r
+ -del /f *.def *.map\r
+ -del /f $(EXTENSION_DLL) $(EXTENSION_PM)\r
+ -del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm\r
+ -del /f $(EXTDIR)\DynaLoader\dl_win32.xs\r
+ -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm\r
+ -del /f $(LIBDIR)\XSLoader.pm\r
+ -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm\r
+ -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm\r
+ -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm\r
+ -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm\r
+ -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm\r
+ -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm\r
+ -del /f $(LIBDIR)\File\Glob.pm\r
+ -del /f $(LIBDIR)\Storable.pm\r
+ -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO\r
+ -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread\r
+ -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B\r
+ -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data\r
+ -del /f $(PODDIR)\*.html\r
+ -del /f $(PODDIR)\*.bat\r
+ cd ..\utils\r
+ -del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc dprofpp\r
+ -del /f *.bat\r
+ cd ..\win32\r
+ cd ..\x2p\r
+ -del /f find2perl s2p\r
+ -del /f *.bat\r
+ cd ..\win32\r
+ -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new\r
+ -del /f $(CONFIGPM)\r
+ -del /f bin\*.bat\r
+ cd $(EXTDIR)\r
+ -del /s *.lib *.def *.map *.pdb *.bs Makefile *$(o) pm_to_blib\r
+ cd ..\win32\r
+ -if exist $(AUTODIR) rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR)\r
+ -if exist $(COREDIR) rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR)\r
+\r
+install : all installbare installhtml\r
+\r
+installbare : utils\r
+ $(PERLEXE) ..\installperl\r
+ if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*\r
+ $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*\r
+ $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*\r
+\r
+installhtml : doc\r
+ $(RCOPY) html\*.* $(INST_HTML)\*.*\r
+\r
+inst_lib : $(CONFIGPM)\r
+ copy splittree.pl .. \r
+ $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)\r
+ $(RCOPY) ..\lib $(INST_LIB)\*.*\r
+\r
+minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils\r
+ $(XCOPY) $(MINIPERL) ..\t\perl.exe\r
+ $(XCOPY) $(GLOBEXE) ..\t\$(NULL)\r
+ attrib -r ..\t\*.*\r
+ copy test ..\t\r
+ cd ..\t\r
+ $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t\r
+ cd ..\win32\r
+\r
+test-prep : all utils\r
+ $(XCOPY) $(PERLEXE) ..\t\$(NULL)\r
+ $(XCOPY) $(PERLDLL) ..\t\$(NULL)\r
+ $(XCOPY) $(GLOBEXE) ..\t\$(NULL)\r
+\r
+test : test-prep\r
+ cd ..\t\r
+ $(PERLEXE) -I..\lib harness\r
+ cd ..\win32\r
+\r
+test-notty : test-prep\r
+ set PERL_SKIP_TTY_TEST=1\r
+ cd ..\t\r
+ $(PERLEXE) -I..\lib harness\r
+ cd ..\win32\r
+\r
+test-wide : test-prep\r
+ set HARNESS_PERL_SWITCHES=-C\r
+ cd ..\t\r
+ $(PERLEXE) -I..\lib harness\r
+ cd ..\win32\r
+\r
+test-wide-notty : test-prep\r
+ set PERL_SKIP_TTY_TEST=1\r
+ set HARNESS_PERL_SWITCHES=-C\r
+ cd ..\t\r
+ $(PERLEXE) -I..\lib harness\r
+ cd ..\win32\r
+\r
+clean : \r
+ -@erase miniperlmain$(o)\r
+ -@erase $(MINIPERL)\r
+ -@erase perlglob$(o)\r
+ -@erase perlmain$(o)\r
+ -@erase config.w32\r
+ -@erase /f config.h\r
+ -@erase $(GLOBEXE)\r
+ -@erase $(PERLEXE)\r
+ -@erase $(WPERLEXE)\r
+ -@erase $(PERLDLL)\r
+ -@erase $(CORE_OBJ)\r
+ -if exist $(MINIDIR) rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR)\r
+ -@erase $(WIN32_OBJ)\r
+ -@erase $(DLL_OBJ)\r
+ -@erase $(X2P_OBJ)\r
+ -@erase ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res\r
+ -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat\r
+ -@erase ..\x2p\*.exe ..\x2p\*.bat\r
+ -@erase *.ilk\r
+ -@erase *.pdb\r
+ \r
+# Handy way to run perlbug -ok without having to install and run the\r
+# installed perlbug. We don't re-run the tests here - we trust the user.\r
+# Please *don't* use this unless all tests pass.\r
+# If you want to report test failures, use "nmake nok" instead.\r
+ok: utils\r
+ $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"\r
+\r
+okfile: utils\r
+ $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok\r
+ \r
+nok: utils\r
+ $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"\r
+ \r
+nokfile: utils\r
+ $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok\r
-#
-# Makefile to build perl on Windows NT using DMAKE.
-# Supported compilers:
-# Visual C++ 2.0 thro 6.0
-# Borland C++ 5.02
-# Mingw32 with gcc-2.95.2 or better **experimental**
-#
-# This is set up to build a perl.exe that runs off a shared library
-# (perl56.dll). Also makes individual DLLs for the XS extensions.
-#
-
-##
-## Make sure you read README.win32 *before* you mess with anything here!
-##
-
-##
-## Build configuration. Edit the values below to suit your needs.
-##
-
-#
-# Set these to wherever you want "dmake install" to put your
-# newly built perl.
-#
-INST_DRV *= c:
-INST_TOP *= $(INST_DRV)\perl
-
-#
-# Comment this out if you DON'T want your perl installation to be versioned.
-# This means that the new installation will overwrite any files from the
-# old installation at the same INST_TOP location. Leaving it enabled is
-# the safest route, as perl adds the extra version directory to all the
-# locations it installs files to. If you disable it, an alternative
-# versioned installation can be obtained by setting INST_TOP above to a
-# path that includes an arbitrary version string.
-#
-INST_VER *= \5.6.0
-
-#
-# Comment this out if you DON'T want your perl installation to have
-# architecture specific components. This means that architecture-
-# specific files will be installed along with the architecture-neutral
-# files. Leaving it enabled is safer and more flexible, in case you
-# want to build multiple flavors of perl and install them together in
-# the same location. Commenting it out gives you a simpler
-# installation that is easier to understand for beginners.
-#
-INST_ARCH *= \$(ARCHNAME)
-
-#
-# uncomment to enable multiple interpreters. This is need for fork()
-# emulation.
-#
-#USE_MULTI *= define
-
-#
-# Beginnings of interpreter cloning/threads; still very incomplete.
-# This should be enabled to get the fork() emulation. This needs
-# USE_MULTI as well.
-#
-#USE_ITHREADS *= define
-
-#
-# uncomment to enable the implicit "host" layer for all system calls
-# made by perl. This needs USE_MULTI above. This is also needed to
-# get fork().
-#
-#USE_IMP_SYS *= define
-
-#
-# WARNING! This option is deprecated and will eventually go away (enable
-# USE_ITHREADS instead).
-#
-# uncomment to enable threads-capabilities. This is incompatible with
-# USE_ITHREADS, and is only here for people who may have come to rely
-# on the experimental Thread support that was in 5.005.
-#
-#USE_5005THREADS *= define
-
-#
-# WARNING! This option is deprecated and will eventually go away (enable
-# USE_MULTI instead).
-#
-# uncomment next line if you want to use the PERL_OBJECT build option.
-# DO NOT ENABLE unless you have legacy code that relies on the C++
-# CPerlObj class that was available in 5.005. This cannot be enabled
-# if you ask for USE_5005THREADS above.
-#
-#USE_OBJECT *= define
-
-#
-# uncomment exactly one of the following
-#
-# Visual C++ 2.x
-#CCTYPE *= MSVC20
-# Visual C++ > 2.x and < 6.x
-#CCTYPE *= MSVC
-# Visual C++ >= 6.x
-#CCTYPE *= MSVC60
-# Borland 5.02 or later
-#CCTYPE *= BORLAND
-# mingw32+gcc-2.95.2 or better
-CCTYPE *= GCC
-
-#
-# uncomment this if you are compiling under Windows 95/98 and command.com
-# (not needed if you're running under 4DOS/NT 6.01 or later)
-#IS_WIN95 *= define
-
-#
-# uncomment next line if you want debug version of perl (big,slow)
-# If not enabled, we automatically try to use maximum optimization
-# with all compilers that are known to have a working optimizer.
-#
-#CFG *= Debug
-
-#
-# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
-# It has patches that fix known bugs in older versions of MSVCRT.DLL.
-# This currently requires VC 5.0 with Service Pack 3 or later.
-# Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/
-# and follow the directions in the package to install.
-#
-# Not recommended if you have VC 6.x and you're not running Windows 9x.
-#
-#USE_PERLCRT *= define
-
-#
-# uncomment to enable linking with setargv.obj under the Visual C
-# compiler. Setting this options enables perl to expand wildcards in
-# arguments, but it may be harder to use alternate methods like
-# File::DosGlob that are more powerful. This option is supported only with
-# Visual C.
-#
-#USE_SETARGV *= define
-
-#
-# if you have the source for des_fcrypt(), uncomment this and make sure the
-# file exists (see README.win32). File should be located in the same
-# directory as this file.
-#
-#CRYPT_SRC *= fcrypt.c
-
-#
-# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
-# library, uncomment this, and make sure the library exists (see README.win32)
-# Specify the full pathname of the library.
-#
-#CRYPT_LIB *= fcrypt.lib
-
-#
-# set this if you wish to use perl's malloc
-# WARNING: Turning this on/off WILL break binary compatibility with extensions
-# you may have compiled with/without it. Be prepared to recompile all
-# extensions if you change the default. Currently, this cannot be enabled
-# if you ask for USE_IMP_SYS above.
-#
-#PERL_MALLOC *= define
-
-#
-# set the install locations of the compiler include/libraries
-# Running VCVARS32.BAT is *required* when using Visual C.
-# Some versions of Visual C don't define MSVCDIR in the environment,
-# so you may have to set CCHOME explicitly (spaces in the path name should
-# not be quoted)
-#
-#CCHOME *= c:\bc5
-#CCHOME *= $(MSVCDIR)
-CCHOME *= c:\gcc-2.95.2-msvcrt
-CCINCDIR *= $(CCHOME)\include
-CCLIBDIR *= $(CCHOME)\lib
-
-#
-# Additional compiler flags can be specified here.
-#
-
-#
-# This should normally be disabled. Adding -DPERL_POLLUTE enables support
-# for old symbols by default, at the expense of extreme pollution. You most
-# probably just want to build modules that won't compile with
-# perl Makefile.PL POLLUTE=1
-# instead of enabling this. Please report such modules to the respective
-# authors.
-#
-#BUILDOPT += -DPERL_POLLUTE
-
-#
-# This should normally be disabled. Enabling it will disable the File::Glob
-# implementation of CORE::glob.
-#
-#BUILDOPT += -DPERL_EXTERNAL_GLOB
-
-#
-# This should normally be disabled. Enabling it causes perl to read scripts
-# in text mode (which is the 5.005 behavior) and will break ByteLoader.
-#BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
-
-#
-# specify semicolon-separated list of extra directories that modules will
-# look for libraries (spaces in path names need not be quoted)
-#
-EXTRALIBDIRS *=
-
-#
-# set this to point to cmd.exe (only needed if you use some
-# alternate shell that doesn't grok cmd.exe style commands)
-#
-#SHELL *= g:\winnt\system32\cmd.exe
-
-#
-# set this to your email address (perl will guess a value from
-# from your loginname and your hostname, which may not be right)
-#
-#EMAIL *=
-
-##
-## Build configuration ends.
-##
-
-##################### CHANGE THESE ONLY IF YOU MUST #####################
-
-.IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
-D_CRYPT = undef
-.ELSE
-D_CRYPT = define
-CRYPT_FLAG = -DHAVE_DES_FCRYPT
-.ENDIF
-
-.IF "$(USE_OBJECT)" == "define"
-PERL_MALLOC != undef
-USE_5005THREADS != undef
-USE_MULTI != undef
-USE_IMP_SYS != define
-.ENDIF
-
-PERL_MALLOC *= undef
-
-USE_5005THREADS *= undef
-
-.IF "$(USE_5005THREADS)" == "define"
-USE_ITHREADS != undef
-.ENDIF
-
-.IF "$(USE_IMP_SYS)" == "define"
-PERL_MALLOC != undef
-.ENDIF
-
-USE_MULTI *= undef
-USE_OBJECT *= undef
-USE_ITHREADS *= undef
-USE_IMP_SYS *= undef
-USE_PERLCRT *= undef
-
-.IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" == "defineundefundefundef"
-USE_MULTI != define
-.ENDIF
-
-.IF "$(USE_ITHREADS)$(USE_MULTI)$(USE_OBJECT)" == "defineundefundef"
-USE_MULTI != define
-USE_5005THREADS != undef
-.ENDIF
-
-.IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef"
-BUILDOPT += -DPERL_IMPLICIT_CONTEXT
-.ENDIF
-
-.IF "$(USE_IMP_SYS)" != "undef"
-BUILDOPT += -DPERL_IMPLICIT_SYS
-.ENDIF
-
-.IMPORT .IGNORE : PROCESSOR_ARCHITECTURE
-
-PROCESSOR_ARCHITECTURE *= x86
-
-.IF "$(USE_OBJECT)" == "define"
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-object
-.ELIF "$(USE_5005THREADS)" == "define"
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread
-.ELIF "$(USE_MULTI)" == "define"
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
-.ELSE
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
-.ENDIF
-
-.IF "$(USE_ITHREADS)" == "define"
-ARCHNAME !:= $(ARCHNAME)-thread
-.ENDIF
-
-# Visual Studio 98 specific
-.IF "$(CCTYPE)" == "MSVC60"
-
-# VC 6.0 can load the socket dll on demand. Makes the test suite
-# run in about 10% less time.
-DELAYLOAD *= -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib
-
-# VC 6.0 seems capable of compiling perl correctly with optimizations
-# enabled. Anything earlier fails tests.
-CFG *= Optimize
-.ENDIF
-
-ARCHDIR = ..\lib\$(ARCHNAME)
-COREDIR = ..\lib\CORE
-AUTODIR = ..\lib\auto
-LIBDIR = ..\lib
-EXTDIR = ..\ext
-PODDIR = ..\pod
-EXTUTILSDIR = $(LIBDIR)\ExtUtils
-
-#
-INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
-INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
-INST_LIB = $(INST_TOP)$(INST_VER)\lib
-INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
-INST_COREDIR = $(INST_ARCHLIB)\CORE
-INST_POD = $(INST_LIB)\pod
-INST_HTML = $(INST_POD)\html
-
-#
-# Programs to compile, build .lib files and link
-#
-
-.USESHELL :
-
-.IF "$(CCTYPE)" == "BORLAND"
-
-CC = bcc32
-LINK32 = tlink32
-LIB32 = tlib /P128
-IMPLIB = implib -c
-RSC = rc
-
-#
-# Options
-#
-INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"
-#PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch
-DEFINES = -DWIN32 $(CRYPT_FLAG)
-LOCDEFS = -DPERLDLL -DPERL_CORE
-SUBSYS = console
-CXX_FLAG = -P
-
-LIBC = cw32mti.lib
-LIBFILES = $(CRYPT_LIB) import32.lib $(LIBC) odbc32.lib odbccp32.lib
-
-.IF "$(CFG)" == "Debug"
-OPTIMIZE = -v -D_RTLDLL -DDEBUGGING
-LINK_DBG = -v
-.ELSE
-OPTIMIZE = -O2 -D_RTLDLL
-LINK_DBG =
-.ENDIF
-
-CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
- $(PCHFLAGS) $(OPTIMIZE)
-LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
-OBJOUT_FLAG = -o
-EXEOUT_FLAG = -e
-LIBOUT_FLAG =
-
-.ELIF "$(CCTYPE)" == "GCC"
-
-CC = gcc
-LINK32 = gcc
-LIB32 = ar rc
-IMPLIB = dlltool
-RSC = rc
-
-o = .o
-a = .a
-
-#
-# Options
-#
-
-INCLUDES = -I$(COREDIR) -I.\include -I. -I..
-DEFINES = -DWIN32 $(CRYPT_FLAG)
-LOCDEFS = -DPERLDLL -DPERL_CORE
-SUBSYS = console
-CXX_FLAG = -xc++
-
-LIBC = -lmsvcrt
-
-# same libs as MSVC
-LIBFILES = $(CRYPT_LIB) $(LIBC) \
- -lmoldname -lkernel32 -luser32 -lgdi32 \
- -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
- -loleaut32 -lnetapi32 -luuid -lwsock32 -lmpr \
- -lwinmm -lversion -lodbc32
-
-.IF "$(CFG)" == "Debug"
-OPTIMIZE = -g -DDEBUGGING
-LINK_DBG = -g
-.ELSE
-OPTIMIZE = -g -O2
-LINK_DBG =
-.ENDIF
-
-CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
-LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
-OBJOUT_FLAG = -o
-EXEOUT_FLAG = -o
-LIBOUT_FLAG =
-
-# NOTE: we assume that GCC uses MSVCRT.DLL
-BUILDOPT += -fno-strict-aliasing -DPERL_MSVCRT_READFIX
-
-.ELSE
-
-CC = cl
-LINK32 = link
-LIB32 = $(LINK32) -lib
-RSC = rc
-
-#
-# Options
-#
-
-INCLUDES = -I$(COREDIR) -I.\include -I. -I..
-#PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
-DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
-LOCDEFS = -DPERLDLL -DPERL_CORE
-SUBSYS = console
-CXX_FLAG = -TP -GX
-
-.IF "$(USE_PERLCRT)" != "define"
-LIBC = msvcrt.lib
-.ELSE
-LIBC = PerlCRT.lib
-.ENDIF
-
-PERLEXE_RES =
-PERLDLL_RES =
-
-.IF "$(CFG)" == "Debug"
-.IF "$(CCTYPE)" == "MSVC20"
-OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
-.ELSE
-OPTIMIZE = -Od -MD -Zi -DDEBUGGING
-.ENDIF
-LINK_DBG = -debug -pdb:none
-.ELSE
-.IF "$(CFG)" == "Optimize"
-# -O1 yields smaller code, which turns out to be faster than -O2
-#OPTIMIZE = -O2 -MD -DNDEBUG
-OPTIMIZE = -O1 -MD -DNDEBUG
-.ELSE
-OPTIMIZE = -Od -MD -DNDEBUG
-.ENDIF
-LINK_DBG = -release
-.ENDIF
-
-LIBBASEFILES = $(CRYPT_LIB) \
- oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
- comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
- netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
- version.lib odbc32.lib odbccp32.lib
-
-# we add LIBC here, since we may be using PerlCRT.dll
-LIBFILES = $(LIBBASEFILES) $(LIBC)
-
-CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
- $(PCHFLAGS) $(OPTIMIZE)
-LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
- -libpath:"$(INST_COREDIR)" \
- -machine:$(PROCESSOR_ARCHITECTURE)
-OBJOUT_FLAG = -Fo
-EXEOUT_FLAG = -Fe
-LIBOUT_FLAG = /out:
-
-.IF "$(USE_PERLCRT)" != "define"
-BUILDOPT += -DPERL_MSVCRT_READFIX
-.ENDIF
-
-.ENDIF
-
-.IF "$(USE_OBJECT)" == "define"
-OPTIMIZE += $(CXX_FLAG)
-BUILDOPT += -DPERL_OBJECT
-.ENDIF
-
-CFLAGS_O = $(CFLAGS) $(BUILDOPT)
-
-# used to allow local linking flags that are not propogated into Config.pm,
-# currently unused
-# -- BKS, 12-12-1999
-PRIV_LINK_FLAGS *=
-BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
-
-#################### do not edit below this line #######################
-############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
-
-o *= .obj
-a *= .lib
-
-LKPRE = INPUT (
-LKPOST = )
-
-#
-# Rules
-#
-
-.SUFFIXES : .c $(o) .dll $(a) .exe .rc .res
-
-.c$(o):
- $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
-
-.y.c:
- $(NOOP)
-
-$(o).dll:
-.IF "$(CCTYPE)" == "BORLAND"
- $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def
- $(IMPLIB) $(*B).lib $@
-.ELIF "$(CCTYPE)" == "GCC"
- $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
- $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
-.ELSE
- $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
- -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
-.ENDIF
-
-.rc.res:
- $(RSC) -i.. $<
-
-#
-# various targets
-MINIPERL = ..\miniperl.exe
-MINIDIR = .\mini
-PERLEXE = ..\perl.exe
-WPERLEXE = ..\wperl.exe
-GLOBEXE = ..\perlglob.exe
-CONFIGPM = ..\lib\Config.pm
-MINIMOD = ..\lib\ExtUtils\Miniperl.pm
-X2P = ..\x2p\a2p.exe
-
-PL2BAT = bin\pl2bat.pl
-GLOBBAT = bin\perlglob.bat
-
-UTILS = \
- ..\utils\h2ph \
- ..\utils\splain \
- ..\utils\dprofpp \
- ..\utils\perlbug \
- ..\utils\pl2pm \
- ..\utils\c2ph \
- ..\utils\h2xs \
- ..\utils\perldoc \
- ..\utils\perlcc \
- ..\pod\checkpods \
- ..\pod\pod2html \
- ..\pod\pod2latex \
- ..\pod\pod2man \
- ..\pod\pod2text \
- ..\pod\pod2usage \
- ..\pod\podchecker \
- ..\pod\podselect \
- ..\x2p\find2perl \
- ..\x2p\s2p \
- bin\exetype.pl \
- bin\runperl.pl \
- bin\pl2bat.pl \
- bin\perlglob.pl \
- bin\search.pl
-
-.IF "$(CCTYPE)" == "BORLAND"
-
-CFGSH_TMPL = config.bc
-CFGH_TMPL = config_H.bc
-
-.ELIF "$(CCTYPE)" == "GCC"
-
-CFGSH_TMPL = config.gc
-CFGH_TMPL = config_H.gc
-PERLIMPLIB = ..\libperl56$(a)
-
-.ELSE
-
-CFGSH_TMPL = config.vc
-CFGH_TMPL = config_H.vc
-
-.ENDIF
-
-PERLIMPLIB *= ..\perl56$(a)
-PERLDLL = ..\perl56.dll
-
-XCOPY = xcopy /f /r /i /d
-RCOPY = xcopy /f /r /i /e /d
-NOOP = @echo
-
-#
-# filenames given to xsubpp must have forward slashes (since it puts
-# full pathnames in #line strings)
-XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
- -C++ -prototypes
-
-MICROCORE_SRC = \
- ..\av.c \
- ..\deb.c \
- ..\doio.c \
- ..\doop.c \
- ..\dump.c \
- ..\globals.c \
- ..\gv.c \
- ..\hv.c \
- ..\mg.c \
- ..\op.c \
- ..\perl.c \
- ..\perlapi.c \
- ..\perly.c \
- ..\pp.c \
- ..\pp_ctl.c \
- ..\pp_hot.c \
- ..\pp_sys.c \
- ..\regcomp.c \
- ..\regexec.c \
- ..\run.c \
- ..\scope.c \
- ..\sv.c \
- ..\taint.c \
- ..\toke.c \
- ..\universal.c \
- ..\utf8.c \
- ..\util.c \
- ..\xsutils.c
-
-EXTRACORE_SRC += perllib.c
-
-.IF "$(PERL_MALLOC)" == "define"
-EXTRACORE_SRC += ..\malloc.c
-.ENDIF
-
-.IF "$(USE_OBJECT)" != "define"
-EXTRACORE_SRC += ..\perlio.c
-.ENDIF
-
-WIN32_SRC = \
- .\win32.c \
- .\win32sck.c \
- .\win32thread.c
-
-.IF "$(CRYPT_SRC)" != ""
-WIN32_SRC += .\$(CRYPT_SRC)
-.ENDIF
-
-DLL_SRC = $(DYNALOADER).c
-
-X2P_SRC = \
- ..\x2p\a2p.c \
- ..\x2p\hash.c \
- ..\x2p\str.c \
- ..\x2p\util.c \
- ..\x2p\walk.c
-
-CORE_NOCFG_H = \
- ..\av.h \
- ..\cop.h \
- ..\cv.h \
- ..\dosish.h \
- ..\embed.h \
- ..\form.h \
- ..\gv.h \
- ..\handy.h \
- ..\hv.h \
- ..\iperlsys.h \
- ..\mg.h \
- ..\nostdio.h \
- ..\op.h \
- ..\opcode.h \
- ..\perl.h \
- ..\perlapi.h \
- ..\perlsdio.h \
- ..\perlsfio.h \
- ..\perly.h \
- ..\pp.h \
- ..\proto.h \
- ..\regexp.h \
- ..\scope.h \
- ..\sv.h \
- ..\thread.h \
- ..\unixish.h \
- ..\utf8.h \
- ..\util.h \
- ..\warnings.h \
- ..\XSUB.h \
- ..\EXTERN.h \
- ..\perlvars.h \
- ..\intrpvar.h \
- ..\thrdvar.h \
- .\include\dirent.h \
- .\include\netdb.h \
- .\include\sys\socket.h \
- .\win32.h
-
-CORE_H = $(CORE_NOCFG_H) .\config.h
-
-MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))
-CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
-WIN32_OBJ = $(WIN32_SRC:db:+$(o))
-MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
-MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}
-MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
-DLL_OBJ = $(DLL_SRC:db:+$(o))
-X2P_OBJ = $(X2P_SRC:db:+$(o))
-
-PERLDLL_OBJ = $(CORE_OBJ)
-PERLEXE_OBJ = perlmain$(o)
-
-PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
-
-.IF "$(USE_SETARGV)" != ""
-SETARGV_OBJ = setargv$(o)
-.ENDIF
-
-DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
- Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
- Sys/Hostname Storable
-STATIC_EXT = DynaLoader
-NONXS_EXT = Errno
-
-DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
-SOCKET = $(EXTDIR)\Socket\Socket
-FCNTL = $(EXTDIR)\Fcntl\Fcntl
-OPCODE = $(EXTDIR)\Opcode\Opcode
-SDBM_FILE = $(EXTDIR)\SDBM_File\SDBM_File
-IO = $(EXTDIR)\IO\IO
-POSIX = $(EXTDIR)\POSIX\POSIX
-ATTRS = $(EXTDIR)\attrs\attrs
-THREAD = $(EXTDIR)\Thread\Thread
-B = $(EXTDIR)\B\B
-RE = $(EXTDIR)\re\re
-DUMPER = $(EXTDIR)\Data\Dumper\Dumper
-ERRNO = $(EXTDIR)\Errno\Errno
-PEEK = $(EXTDIR)\Devel\Peek\Peek
-BYTELOADER = $(EXTDIR)\ByteLoader\ByteLoader
-DPROF = $(EXTDIR)\Devel\DProf\DProf
-GLOB = $(EXTDIR)\File\Glob\Glob
-HOSTNAME = $(EXTDIR)\Sys\Hostname\Hostname
-STORABLE = $(EXTDIR)\Storable\Storable
-
-SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll
-FCNTL_DLL = $(AUTODIR)\Fcntl\Fcntl.dll
-OPCODE_DLL = $(AUTODIR)\Opcode\Opcode.dll
-SDBM_FILE_DLL = $(AUTODIR)\SDBM_File\SDBM_File.dll
-IO_DLL = $(AUTODIR)\IO\IO.dll
-POSIX_DLL = $(AUTODIR)\POSIX\POSIX.dll
-ATTRS_DLL = $(AUTODIR)\attrs\attrs.dll
-THREAD_DLL = $(AUTODIR)\Thread\Thread.dll
-B_DLL = $(AUTODIR)\B\B.dll
-DUMPER_DLL = $(AUTODIR)\Data\Dumper\Dumper.dll
-PEEK_DLL = $(AUTODIR)\Devel\Peek\Peek.dll
-RE_DLL = $(AUTODIR)\re\re.dll
-BYTELOADER_DLL = $(AUTODIR)\ByteLoader\ByteLoader.dll
-DPROF_DLL = $(AUTODIR)\Devel\DProf\DProf.dll
-GLOB_DLL = $(AUTODIR)\File\Glob\Glob.dll
-HOSTNAME_DLL = $(AUTODIR)\Sys\Hostname\Hostname.dll
-STORABLE_DLL = $(AUTODIR)\Storable\Storable.dll
-
-ERRNO_PM = $(LIBDIR)\Errno.pm
-
-EXTENSION_C = \
- $(SOCKET).c \
- $(FCNTL).c \
- $(OPCODE).c \
- $(SDBM_FILE).c \
- $(IO).c \
- $(POSIX).c \
- $(ATTRS).c \
- $(THREAD).c \
- $(RE).c \
- $(DUMPER).c \
- $(PEEK).c \
- $(B).c \
- $(BYTELOADER).c \
- $(DPROF).c \
- $(GLOB).c \
- $(HOSTNAME).c \
- $(STORABLE).c
-
-EXTENSION_DLL = \
- $(SOCKET_DLL) \
- $(FCNTL_DLL) \
- $(OPCODE_DLL) \
- $(SDBM_FILE_DLL)\
- $(IO_DLL) \
- $(POSIX_DLL) \
- $(ATTRS_DLL) \
- $(DUMPER_DLL) \
- $(PEEK_DLL) \
- $(B_DLL) \
- $(RE_DLL) \
- $(THREAD_DLL) \
- $(BYTELOADER_DLL) \
- $(DPROF_DLL) \
- $(GLOB_DLL) \
- $(HOSTNAME_DLL) \
- $(STORABLE_DLL)
-
-EXTENSION_PM = \
- $(ERRNO_PM)
-
-POD2HTML = $(PODDIR)\pod2html
-POD2MAN = $(PODDIR)\pod2man
-POD2LATEX = $(PODDIR)\pod2latex
-POD2TEXT = $(PODDIR)\pod2text
-
-# vars must be separated by "\t+~\t+", since we're using the tempfile
-# version of config_sh.pl (we were overflowing someone's buffer by
-# trying to fit them all on the command line)
-# -- BKS 10-17-1999
-CFG_VARS = \
- INST_DRV=$(INST_DRV) ~ \
- INST_TOP=$(INST_TOP:s/\/\\/) ~ \
- INST_VER=$(INST_VER:s/\/\\/) ~ \
- INST_ARCH=$(INST_ARCH) ~ \
- archname=$(ARCHNAME) ~ \
- cc=$(CC) ~ \
- ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
- cf_email=$(EMAIL) ~ \
- d_crypt=$(D_CRYPT) ~ \
- d_mymalloc=$(PERL_MALLOC) ~ \
- libs=$(LIBFILES:f) ~ \
- incpath=$(CCINCDIR:s/\/\\/) ~ \
- libperl=$(PERLIMPLIB:f) ~ \
- libpth=$(CCLIBDIR:s/\/\\/);$(EXTRALIBDIRS:s/\/\\/) ~ \
- libc=$(LIBC) ~ \
- make=dmake ~ \
- _o=$(o) obj_ext=$(o) ~ \
- _a=$(a) lib_ext=$(a) ~ \
- static_ext=$(STATIC_EXT) ~ \
- dynamic_ext=$(DYNAMIC_EXT) ~ \
- nonxs_ext=$(NONXS_EXT) ~ \
- use5005threads=$(USE_5005THREADS) ~ \
- useithreads=$(USE_ITHREADS) ~ \
- usethreads=$(USE_5005THREADS) ~ \
- usemultiplicity=$(USE_MULTI) ~ \
- LINK_FLAGS=$(LINK_FLAGS:s/\/\\/) ~ \
- optimize=$(OPTIMIZE)
-
-#
-# set up targets varying between Win95 and WinNT builds
-#
-
-.IF "$(IS_WIN95)" == "define"
-MK2 = .\makefile.95
-RIGHTMAKE = __switch_makefiles
-NOOP = @rem
-.ELSE
-MK2 = __not_needed
-RIGHTMAKE = __not_needed
-.ENDIF
-
-#
-# Top targets
-#
-
-all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \
- $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \
- $(X2P) $(EXTENSION_DLL) $(EXTENSION_PM)
-
-$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
-
-#----------------------------------------------------------------
-
-#-------------------- BEGIN Win95 SPECIFIC ----------------------
-
-# this target is a jump-off point for Win95
-# 1. it switches to the Win95-specific makefile if it exists
-# (__do_switch_makefiles)
-# 2. it prints a message when the Win95-specific one finishes (__done)
-# 3. it then kills this makefile by trying to make __no_such_target
-
-__switch_makefiles: __do_switch_makefiles __done __no_such_target
-
-__do_switch_makefiles:
-.IF "$(NOTFIRST)" != "true"
- if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true
-.ELSE
- $(NOOP)
-.ENDIF
-
-.IF "$(NOTFIRST)" != "true"
-__done:
- @echo Build process complete. Ignore any errors after this message.
- @echo Run "dmake test" to test and "dmake install" to install
-
-.ELSE
-# dummy targets for Win95-specific makefile
-
-__done:
- $(NOOP)
-
-__no_such_target:
- $(NOOP)
-
-.ENDIF
-
-# This target is used to generate the new makefile (.\makefile.95) for Win95
-
-.\makefile.95: .\makefile.mk
- $(MINIPERL) genmk95.pl makefile.mk $(MK2)
-
-#--------------------- END Win95 SPECIFIC ---------------------
-
-# a blank target for when builds don't need to do certain things
-# this target added for Win95 port but used to keep the WinNT port able to
-# use this file
-__not_needed:
- $(NOOP)
-
-$(GLOBEXE) : perlglob$(o)
-.IF "$(CCTYPE)" == "BORLAND"
- $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c
- $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \
- "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,
-.ELIF "$(CCTYPE)" == "GCC"
- $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
-.ELSE
- $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
- perlglob$(o) setargv$(o)
-.ENDIF
-
-perlglob$(o) : perlglob.c
-
-config.w32 : $(CFGSH_TMPL)
- copy $(CFGSH_TMPL) config.w32
-
-.\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
- -del /f config.h
- copy $(CFGH_TMPL) config.h
-
-..\config.sh : config.w32 $(MINIPERL) config_sh.PL
- $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
- $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh
-
-# this target is for when changes to the main config.sh happen
-# edit config.{b,v,g}c and make this target once for each supported
-# compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
-regen_config_h:
- perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
- $(CFGSH_TMPL) > ..\config.sh
- -cd .. && del /f perl.exe
- cd .. && perl configpm
- -del /f $(CFGH_TMPL)
- -mkdir $(COREDIR)
- -perl -I..\lib config_h.PL "INST_VER=$(INST_VER)"
- rename config.h $(CFGH_TMPL)
-
-$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
- cd .. && miniperl configpm
- if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
- $(XCOPY) ..\*.h $(COREDIR)\*.*
- $(XCOPY) *.h $(COREDIR)\*.*
- $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
- $(RCOPY) include $(COREDIR)\*.*
- $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
- || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
-
-$(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
-.IF "$(CCTYPE)" == "BORLAND"
- $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
- @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
-.ELIF "$(CCTYPE)" == "GCC"
- $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \
- $(mktmp $(LKPRE) $(MINI_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
-.ELSE
- $(LINK32) -subsystem:console -out:$@ \
- @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,\\))
-.ENDIF
-
-$(MINIDIR) :
- if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
-
-$(MINICORE_OBJ) : $(CORE_NOCFG_H)
- $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c
-
-$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
- $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c
-
-# -DPERL_IMPLICIT_SYS needs C++ for perllib.c
-# rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
-# unless the .IF is true), so instead we use a .ELSE with the default.
-# This is the only file that depends on perlhost.h, vmem.h, and vdir.h
-
-perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
-.IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef"
- $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
-.ELSE
- $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
-.ENDIF
-
-# 1. we don't want to rebuild miniperl.exe when config.h changes
-# 2. we don't want to rebuild miniperl.exe with non-default config.h
-$(MINI_OBJ) : $(CORE_NOCFG_H)
-
-$(WIN32_OBJ) : $(CORE_H)
-$(CORE_OBJ) : $(CORE_H)
-$(DLL_OBJ) : $(CORE_H)
-$(X2P_OBJ) : $(CORE_H)
-
-perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
- $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
- $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def
-
-$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)
-.IF "$(CCTYPE)" == "BORLAND"
- $(LINK32) -Tpd -ap $(BLINK_FLAGS) \
- @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,\\)\n \
- $@,\n \
- $(LIBFILES)\n \
- perldll.def\n)
- $(IMPLIB) $*.lib $@
-.ELIF "$(CCTYPE)" == "GCC"
- $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
- $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
- dlltool --output-lib $(PERLIMPLIB) \
- --dllname $(PERLDLL:b).dll \
- --def perldll.def \
- --base-file perl.base \
- --output-exp perl.exp
- $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
- $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) \
- perl.exp $(LKPOST))
-.ELSE
- $(LINK32) -dll -def:perldll.def -out:$@ \
- @$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \
- $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,\\))
-.ENDIF
- $(XCOPY) $(PERLIMPLIB) $(COREDIR)
-
-$(MINIMOD) : $(MINIPERL) ..\minimod.pl
- cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
-
-..\x2p\a2p$(o) : ..\x2p\a2p.c
- $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
-
-..\x2p\hash$(o) : ..\x2p\hash.c
- $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
-
-..\x2p\str$(o) : ..\x2p\str.c
- $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
-
-..\x2p\util$(o) : ..\x2p\util.c
- $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
-
-..\x2p\walk$(o) : ..\x2p\walk.c
- $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
-
-$(X2P) : $(MINIPERL) $(X2P_OBJ)
- $(MINIPERL) ..\x2p\find2perl.PL
- $(MINIPERL) ..\x2p\s2p.PL
-.IF "$(CCTYPE)" == "BORLAND"
- $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
- @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
-.ELIF "$(CCTYPE)" == "GCC"
- $(LINK32) -v -o $@ $(BLINK_FLAGS) \
- $(mktmp $(LKPRE) $(X2P_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
-.ELSE
- $(LINK32) -subsystem:console -out:$@ \
- @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,\\))
-.ENDIF
-
-perlmain.c : runperl.c
- copy runperl.c perlmain.c
-
-perlmain$(o) : perlmain.c
- $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
-
-$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
-.IF "$(CCTYPE)" == "BORLAND"
- $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
- @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,\\)\n \
- $(@:s,\,\\),\n \
- $(PERLIMPLIB) $(LIBFILES)\n)
-.ELIF "$(CCTYPE)" == "GCC"
- $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
- $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)
-.ELSE
- $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
- $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
-.ENDIF
- copy $(PERLEXE) $(WPERLEXE)
- $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
- copy splittree.pl ..
- $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
-
-$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
- if not exist $(AUTODIR) mkdir $(AUTODIR)
- cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
- cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
- $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
- $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
- cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c
- $(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .
-
-$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
- copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
-
-$(DUMPER_DLL): $(PERLEXE) $(DUMPER).xs
- cd $(EXTDIR)\Data\$(*B) && \
- ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
- cd $(EXTDIR)\Data\$(*B) && $(MAKE)
-
-$(DPROF_DLL): $(PERLEXE) $(DPROF).xs
- cd $(EXTDIR)\Devel\$(*B) && \
- ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
- cd $(EXTDIR)\Devel\$(*B) && $(MAKE)
-
-$(GLOB_DLL): $(PERLEXE) $(GLOB).xs
- cd $(EXTDIR)\File\$(*B) && \
- ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
- cd $(EXTDIR)\File\$(*B) && $(MAKE)
-
-$(PEEK_DLL): $(PERLEXE) $(PEEK).xs
- cd $(EXTDIR)\Devel\$(*B) && \
- ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
- cd $(EXTDIR)\Devel\$(*B) && $(MAKE)
-
-$(RE_DLL): $(PERLEXE) $(RE).xs
- cd $(EXTDIR)\$(*B) && \
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- cd $(EXTDIR)\$(*B) && $(MAKE)
-
-$(B_DLL): $(PERLEXE) $(B).xs
- cd $(EXTDIR)\$(*B) && \
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- cd $(EXTDIR)\$(*B) && $(MAKE)
-
-$(THREAD_DLL): $(PERLEXE) $(THREAD).xs
- cd $(EXTDIR)\$(*B) && \
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- cd $(EXTDIR)\$(*B) && $(MAKE)
-
-$(ATTRS_DLL): $(PERLEXE) $(ATTRS).xs
- cd $(EXTDIR)\$(*B) && \
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- cd $(EXTDIR)\$(*B) && $(MAKE)
-
-$(POSIX_DLL): $(PERLEXE) $(POSIX).xs
- cd $(EXTDIR)\$(*B) && \
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- cd $(EXTDIR)\$(*B) && $(MAKE)
-
-$(IO_DLL): $(PERLEXE) $(IO).xs
- cd $(EXTDIR)\$(*B) && \
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- cd $(EXTDIR)\$(*B) && $(MAKE)
-
-$(SDBM_FILE_DLL) : $(PERLEXE) $(SDBM_FILE).xs
- cd $(EXTDIR)\$(*B) && \
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- cd $(EXTDIR)\$(*B) && $(MAKE)
-
-$(FCNTL_DLL): $(PERLEXE) $(FCNTL).xs
- cd $(EXTDIR)\$(*B) && \
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- cd $(EXTDIR)\$(*B) && $(MAKE)
-
-$(OPCODE_DLL): $(PERLEXE) $(OPCODE).xs
- cd $(EXTDIR)\$(*B) && \
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- cd $(EXTDIR)\$(*B) && $(MAKE)
-
-$(SOCKET_DLL): $(PERLEXE) $(SOCKET).xs
- cd $(EXTDIR)\$(*B) && \
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- cd $(EXTDIR)\$(*B) && $(MAKE)
-
-$(HOSTNAME_DLL): $(PERLEXE) $(HOSTNAME).xs
- cd $(EXTDIR)\Sys\$(*B) && \
- ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
- cd $(EXTDIR)\Sys\$(*B) && $(MAKE)
-
-$(BYTELOADER_DLL): $(PERLEXE) $(BYTELOADER).xs
- cd $(EXTDIR)\$(*B) && \
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- cd $(EXTDIR)\$(*B) && $(MAKE)
-
-$(STORABLE_DLL): $(PERLEXE) $(STORABLE).xs
- cd $(EXTDIR)\$(*B) && \
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- cd $(EXTDIR)\$(*B) && $(MAKE)
-
-$(ERRNO_PM): $(PERLEXE) $(ERRNO)_pm.PL
- cd $(EXTDIR)\$(*B) && \
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- cd $(EXTDIR)\$(*B) && $(MAKE)
-
-doc: $(PERLEXE)
- $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
- --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
- --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
-
-utils: $(PERLEXE) $(X2P)
- cd ..\utils && $(MAKE) PERL=$(MINIPERL)
- copy ..\README.amiga ..\pod\perlamiga.pod
- copy ..\README.cygwin ..\pod\perlcygwin.pod
- copy ..\README.dos ..\pod\perldos.pod
- copy ..\README.hpux ..\pod\perlhpux.pod
- copy ..\README.machten ..\pod\perlmachten.pod
- copy ..\README.os2 ..\pod\perlos2.pod
- copy ..\README.os2 ..\pod\perlos2.pod
- copy ..\vms\perlvms.pod ..\pod\perlvms.pod
- cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
- cd ..\lib && $(PERLEXE) lib_pm.PL
- $(PERLEXE) $(PL2BAT) $(UTILS)
-
-distclean: clean
- -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
- $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)
- -del /f *.def *.map
- -del /f $(EXTENSION_DLL) $(EXTENSION_PM)
- -del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm
- -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
- -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
- -del /f $(LIBDIR)\XSLoader.pm
- -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
- -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm
- -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
- -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
- -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm
- -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
- -del /f $(LIBDIR)\File\Glob.pm
- -del /f $(LIBDIR)\Storable.pm
- -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO
- -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread
- -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B
- -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data
- -del /f $(PODDIR)\*.html
- -del /f $(PODDIR)\*.bat
- -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc \
- dprofpp *.bat
- -cd ..\x2p && del /f find2perl s2p *.bat
- -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
- -del /f $(CONFIGPM)
- -del /f bin\*.bat
- -cd $(EXTDIR) && del /s *$(a) *.def *.map *.pdb *.bs Makefile *$(o) \
- pm_to_blib
- -if exist $(AUTODIR) rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR)
- -if exist $(COREDIR) rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR)
-
-install : all installbare installhtml
-
-installbare : $(RIGHTMAKE) utils
- $(PERLEXE) ..\installperl
- if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
- $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
- $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
-
-installhtml : doc
- $(RCOPY) html\*.* $(INST_HTML)\*.*
-
-inst_lib : $(CONFIGPM)
- copy splittree.pl ..
- $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
- $(RCOPY) ..\lib $(INST_LIB)\*.*
-
-minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils
- $(XCOPY) $(MINIPERL) ..\t\perl.exe
-.IF "$(CCTYPE)" == "BORLAND"
- $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
-.ELSE
- $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
-.ENDIF
- attrib -r ..\t\*.*
- copy test ..\t
- cd ..\t && \
- $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
-
-test-prep : all utils
- $(XCOPY) $(PERLEXE) ..\t\$(NULL)
- $(XCOPY) $(PERLDLL) ..\t\$(NULL)
-.IF "$(CCTYPE)" == "BORLAND"
- $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
-.ELSE
- $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
-.ENDIF
-
-test : $(RIGHTMAKE) test-prep
- cd ..\t && $(PERLEXE) -I..\lib harness
-
-test-notty : test-prep
- set PERL_SKIP_TTY_TEST=1 && \
- cd ..\t && $(PERLEXE) -I.\lib harness
-
-test-wide : test-prep
- set HARNESS_PERL_SWITCHES=-C && \
- cd ..\t && $(PERLEXE) -I..\lib harness
-
-test-wide-notty : test-prep
- set PERL_SKIP_TTY_TEST=1 && \
- set HARNESS_PERL_SWITCHES=-C && \
- cd ..\t && $(PERLEXE) -I..\lib harness
-
-clean :
- -@erase miniperlmain$(o)
- -@erase $(MINIPERL)
- -@erase perlglob$(o)
- -@erase perlmain$(o)
- -@erase config.w32
- -@erase /f config.h
- -@erase $(GLOBEXE)
- -@erase $(PERLEXE)
- -@erase $(WPERLEXE)
- -@erase $(PERLDLL)
- -@erase $(CORE_OBJ)
- -if exist $(MINIDIR) rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR)
- -@erase $(WIN32_OBJ)
- -@erase $(DLL_OBJ)
- -@erase $(X2P_OBJ)
- -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
- -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
- -@erase ..\x2p\*.exe ..\x2p\*.bat
- -@erase *.ilk
- -@erase *.pdb
-
-# Handy way to run perlbug -ok without having to install and run the
-# installed perlbug. We don't re-run the tests here - we trust the user.
-# Please *don't* use this unless all tests pass.
-# If you want to report test failures, use "dmake nok" instead.
-ok: utils
- $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
-
-okfile: utils
- $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
-
-nok: utils
- $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
-
-nokfile: utils
- $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok
+#\r
+# Makefile to build perl on Windows NT using DMAKE.\r
+# Supported compilers:\r
+# Visual C++ 2.0 thro 6.0\r
+# Borland C++ 5.02\r
+# Mingw32 with gcc-2.95.2 or better **experimental**\r
+#\r
+# This is set up to build a perl.exe that runs off a shared library\r
+# (perl56.dll). Also makes individual DLLs for the XS extensions.\r
+#\r
+\r
+##\r
+## Make sure you read README.win32 *before* you mess with anything here!\r
+##\r
+\r
+##\r
+## Build configuration. Edit the values below to suit your needs.\r
+##\r
+\r
+#\r
+# Set these to wherever you want "dmake install" to put your\r
+# newly built perl.\r
+#\r
+INST_DRV *= c:\r
+INST_TOP *= $(INST_DRV)\perl\r
+\r
+#\r
+# Comment this out if you DON'T want your perl installation to be versioned.\r
+# This means that the new installation will overwrite any files from the\r
+# old installation at the same INST_TOP location. Leaving it enabled is\r
+# the safest route, as perl adds the extra version directory to all the\r
+# locations it installs files to. If you disable it, an alternative\r
+# versioned installation can be obtained by setting INST_TOP above to a\r
+# path that includes an arbitrary version string.\r
+#\r
+INST_VER *= \5.6.0\r
+\r
+#\r
+# Comment this out if you DON'T want your perl installation to have\r
+# architecture specific components. This means that architecture-\r
+# specific files will be installed along with the architecture-neutral\r
+# files. Leaving it enabled is safer and more flexible, in case you\r
+# want to build multiple flavors of perl and install them together in\r
+# the same location. Commenting it out gives you a simpler\r
+# installation that is easier to understand for beginners.\r
+#\r
+INST_ARCH *= \$(ARCHNAME)\r
+\r
+#\r
+# uncomment to enable multiple interpreters. This is need for fork()\r
+# emulation.\r
+#\r
+#USE_MULTI *= define\r
+\r
+#\r
+# Beginnings of interpreter cloning/threads; still very incomplete.\r
+# This should be enabled to get the fork() emulation. This needs\r
+# USE_MULTI as well.\r
+#\r
+#USE_ITHREADS *= define\r
+\r
+#\r
+# uncomment to enable the implicit "host" layer for all system calls\r
+# made by perl. This needs USE_MULTI above. This is also needed to\r
+# get fork().\r
+#\r
+#USE_IMP_SYS *= define\r
+\r
+#\r
+# WARNING! This option is deprecated and will eventually go away (enable\r
+# USE_ITHREADS instead).\r
+#\r
+# uncomment to enable threads-capabilities. This is incompatible with\r
+# USE_ITHREADS, and is only here for people who may have come to rely\r
+# on the experimental Thread support that was in 5.005.\r
+#\r
+#USE_5005THREADS *= define\r
+\r
+#\r
+# WARNING! This option is deprecated and will eventually go away (enable\r
+# USE_MULTI instead).\r
+#\r
+# uncomment next line if you want to use the PERL_OBJECT build option.\r
+# DO NOT ENABLE unless you have legacy code that relies on the C++\r
+# CPerlObj class that was available in 5.005. This cannot be enabled\r
+# if you ask for USE_5005THREADS above.\r
+#\r
+#USE_OBJECT *= define\r
+\r
+#\r
+# uncomment exactly one of the following\r
+# \r
+# Visual C++ 2.x\r
+#CCTYPE *= MSVC20\r
+# Visual C++ > 2.x and < 6.x\r
+#CCTYPE *= MSVC\r
+# Visual C++ >= 6.x\r
+#CCTYPE *= MSVC60\r
+# Borland 5.02 or later\r
+#CCTYPE *= BORLAND\r
+# mingw32+gcc-2.95.2 or better\r
+CCTYPE *= GCC\r
+\r
+#\r
+# uncomment this if you are compiling under Windows 95/98 and command.com\r
+# (not needed if you're running under 4DOS/NT 6.01 or later)\r
+#IS_WIN95 *= define\r
+\r
+#\r
+# uncomment next line if you want debug version of perl (big,slow)\r
+# If not enabled, we automatically try to use maximum optimization\r
+# with all compilers that are known to have a working optimizer.\r
+#\r
+#CFG *= Debug\r
+\r
+#\r
+# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.\r
+# It has patches that fix known bugs in older versions of MSVCRT.DLL.\r
+# This currently requires VC 5.0 with Service Pack 3 or later.\r
+# Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/\r
+# and follow the directions in the package to install.\r
+#\r
+# Not recommended if you have VC 6.x and you're not running Windows 9x.\r
+#\r
+#USE_PERLCRT *= define\r
+\r
+#\r
+# uncomment to enable linking with setargv.obj under the Visual C\r
+# compiler. Setting this options enables perl to expand wildcards in\r
+# arguments, but it may be harder to use alternate methods like\r
+# File::DosGlob that are more powerful. This option is supported only with\r
+# Visual C.\r
+#\r
+#USE_SETARGV *= define\r
+\r
+#\r
+# if you have the source for des_fcrypt(), uncomment this and make sure the\r
+# file exists (see README.win32). File should be located in the same\r
+# directory as this file.\r
+#\r
+#CRYPT_SRC *= fcrypt.c\r
+\r
+#\r
+# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a\r
+# library, uncomment this, and make sure the library exists (see README.win32)\r
+# Specify the full pathname of the library.\r
+#\r
+#CRYPT_LIB *= fcrypt.lib\r
+\r
+#\r
+# set this if you wish to use perl's malloc\r
+# WARNING: Turning this on/off WILL break binary compatibility with extensions\r
+# you may have compiled with/without it. Be prepared to recompile all\r
+# extensions if you change the default. Currently, this cannot be enabled\r
+# if you ask for USE_IMP_SYS above.\r
+#\r
+#PERL_MALLOC *= define\r
+\r
+#\r
+# set the install locations of the compiler include/libraries\r
+# Running VCVARS32.BAT is *required* when using Visual C.\r
+# Some versions of Visual C don't define MSVCDIR in the environment,\r
+# so you may have to set CCHOME explicitly (spaces in the path name should\r
+# not be quoted)\r
+#\r
+#CCHOME *= c:\bc5\r
+#CCHOME *= $(MSVCDIR)\r
+CCHOME *= c:\gcc-2.95.2-msvcrt\r
+CCINCDIR *= $(CCHOME)\include\r
+CCLIBDIR *= $(CCHOME)\lib\r
+\r
+#\r
+# Additional compiler flags can be specified here.\r
+#\r
+\r
+#\r
+# This should normally be disabled. Adding -DPERL_POLLUTE enables support\r
+# for old symbols by default, at the expense of extreme pollution. You most\r
+# probably just want to build modules that won't compile with\r
+# perl Makefile.PL POLLUTE=1\r
+# instead of enabling this. Please report such modules to the respective\r
+# authors.\r
+#\r
+#BUILDOPT += -DPERL_POLLUTE\r
+\r
+#\r
+# This should normally be disabled. Enabling it will disable the File::Glob\r
+# implementation of CORE::glob.\r
+#\r
+#BUILDOPT += -DPERL_EXTERNAL_GLOB\r
+\r
+#\r
+# This should normally be disabled. Enabling it causes perl to read scripts\r
+# in text mode (which is the 5.005 behavior) and will break ByteLoader.\r
+#BUILDOPT += -DPERL_TEXTMODE_SCRIPTS\r
+\r
+#\r
+# specify semicolon-separated list of extra directories that modules will\r
+# look for libraries (spaces in path names need not be quoted)\r
+#\r
+EXTRALIBDIRS *=\r
+\r
+#\r
+# set this to point to cmd.exe (only needed if you use some\r
+# alternate shell that doesn't grok cmd.exe style commands)\r
+#\r
+#SHELL *= g:\winnt\system32\cmd.exe\r
+\r
+#\r
+# set this to your email address (perl will guess a value from\r
+# from your loginname and your hostname, which may not be right)\r
+#\r
+#EMAIL *=\r
+\r
+##\r
+## Build configuration ends.\r
+##\r
+\r
+##################### CHANGE THESE ONLY IF YOU MUST #####################\r
+\r
+.IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""\r
+D_CRYPT = undef\r
+.ELSE\r
+D_CRYPT = define\r
+CRYPT_FLAG = -DHAVE_DES_FCRYPT\r
+.ENDIF\r
+\r
+.IF "$(USE_OBJECT)" == "define"\r
+PERL_MALLOC != undef\r
+USE_5005THREADS != undef\r
+USE_MULTI != undef\r
+USE_IMP_SYS != define\r
+.ENDIF\r
+\r
+PERL_MALLOC *= undef\r
+\r
+USE_5005THREADS *= undef\r
+\r
+.IF "$(USE_5005THREADS)" == "define"\r
+USE_ITHREADS != undef\r
+.ENDIF\r
+\r
+.IF "$(USE_IMP_SYS)" == "define"\r
+PERL_MALLOC != undef\r
+.ENDIF\r
+\r
+USE_MULTI *= undef\r
+USE_OBJECT *= undef\r
+USE_ITHREADS *= undef\r
+USE_IMP_SYS *= undef\r
+USE_PERLCRT *= undef\r
+\r
+.IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" == "defineundefundefundef"\r
+USE_MULTI != define\r
+.ENDIF\r
+\r
+.IF "$(USE_ITHREADS)$(USE_MULTI)$(USE_OBJECT)" == "defineundefundef"\r
+USE_MULTI != define\r
+USE_5005THREADS != undef\r
+.ENDIF\r
+\r
+.IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef"\r
+BUILDOPT += -DPERL_IMPLICIT_CONTEXT\r
+.ENDIF\r
+\r
+.IF "$(USE_IMP_SYS)" != "undef"\r
+BUILDOPT += -DPERL_IMPLICIT_SYS\r
+.ENDIF\r
+\r
+.IMPORT .IGNORE : PROCESSOR_ARCHITECTURE\r
+\r
+PROCESSOR_ARCHITECTURE *= x86\r
+\r
+.IF "$(USE_OBJECT)" == "define"\r
+ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-object\r
+.ELIF "$(USE_5005THREADS)" == "define"\r
+ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread\r
+.ELIF "$(USE_MULTI)" == "define"\r
+ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi\r
+.ELSE\r
+ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)\r
+.ENDIF\r
+\r
+.IF "$(USE_ITHREADS)" == "define"\r
+ARCHNAME !:= $(ARCHNAME)-thread\r
+.ENDIF\r
+\r
+# Visual Studio 98 specific\r
+.IF "$(CCTYPE)" == "MSVC60"\r
+\r
+# VC 6.0 can load the socket dll on demand. Makes the test suite\r
+# run in about 10% less time.\r
+DELAYLOAD *= -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib \r
+\r
+# VC 6.0 seems capable of compiling perl correctly with optimizations\r
+# enabled. Anything earlier fails tests.\r
+CFG *= Optimize\r
+.ENDIF\r
+\r
+ARCHDIR = ..\lib\$(ARCHNAME)\r
+COREDIR = ..\lib\CORE\r
+AUTODIR = ..\lib\auto\r
+LIBDIR = ..\lib\r
+EXTDIR = ..\ext\r
+PODDIR = ..\pod\r
+EXTUTILSDIR = $(LIBDIR)\ExtUtils\r
+\r
+#\r
+INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin\r
+INST_BIN = $(INST_SCRIPT)$(INST_ARCH)\r
+INST_LIB = $(INST_TOP)$(INST_VER)\lib\r
+INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)\r
+INST_COREDIR = $(INST_ARCHLIB)\CORE\r
+INST_POD = $(INST_LIB)\pod\r
+INST_HTML = $(INST_POD)\html\r
+\r
+#\r
+# Programs to compile, build .lib files and link\r
+#\r
+\r
+.USESHELL :\r
+\r
+.IF "$(CCTYPE)" == "BORLAND"\r
+\r
+CC = bcc32\r
+LINK32 = tlink32\r
+LIB32 = tlib /P128\r
+IMPLIB = implib -c\r
+RSC = rc\r
+\r
+#\r
+# Options\r
+#\r
+INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"\r
+#PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch \r
+DEFINES = -DWIN32 $(CRYPT_FLAG)\r
+LOCDEFS = -DPERLDLL -DPERL_CORE\r
+SUBSYS = console\r
+CXX_FLAG = -P\r
+\r
+LIBC = cw32mti.lib\r
+LIBFILES = $(CRYPT_LIB) import32.lib $(LIBC) odbc32.lib odbccp32.lib\r
+\r
+.IF "$(CFG)" == "Debug"\r
+OPTIMIZE = -v -D_RTLDLL -DDEBUGGING\r
+LINK_DBG = -v\r
+.ELSE\r
+OPTIMIZE = -O2 -D_RTLDLL\r
+LINK_DBG = \r
+.ENDIF\r
+\r
+CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \\r
+ $(PCHFLAGS) $(OPTIMIZE)\r
+LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"\r
+OBJOUT_FLAG = -o\r
+EXEOUT_FLAG = -e\r
+LIBOUT_FLAG = \r
+\r
+.ELIF "$(CCTYPE)" == "GCC"\r
+\r
+CC = gcc\r
+LINK32 = gcc\r
+LIB32 = ar rc\r
+IMPLIB = dlltool\r
+RSC = rc\r
+\r
+o = .o\r
+a = .a\r
+\r
+#\r
+# Options\r
+#\r
+\r
+INCLUDES = -I$(COREDIR) -I.\include -I. -I..\r
+DEFINES = -DWIN32 $(CRYPT_FLAG)\r
+LOCDEFS = -DPERLDLL -DPERL_CORE\r
+SUBSYS = console\r
+CXX_FLAG = -xc++\r
+\r
+LIBC = -lmsvcrt\r
+\r
+# same libs as MSVC\r
+LIBFILES = $(CRYPT_LIB) $(LIBC) \\r
+ -lmoldname -lkernel32 -luser32 -lgdi32 \\r
+ -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \\r
+ -loleaut32 -lnetapi32 -luuid -lwsock32 -lmpr \\r
+ -lwinmm -lversion -lodbc32\r
+\r
+.IF "$(CFG)" == "Debug"\r
+OPTIMIZE = -g -DDEBUGGING\r
+LINK_DBG = -g\r
+.ELSE\r
+OPTIMIZE = -g -O2\r
+LINK_DBG = \r
+.ENDIF\r
+\r
+CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)\r
+LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"\r
+OBJOUT_FLAG = -o\r
+EXEOUT_FLAG = -o\r
+LIBOUT_FLAG = \r
+\r
+# NOTE: we assume that GCC uses MSVCRT.DLL\r
+BUILDOPT += -fno-strict-aliasing -DPERL_MSVCRT_READFIX\r
+\r
+.ELSE\r
+\r
+CC = cl\r
+LINK32 = link\r
+LIB32 = $(LINK32) -lib\r
+RSC = rc\r
+\r
+#\r
+# Options\r
+#\r
+\r
+INCLUDES = -I$(COREDIR) -I.\include -I. -I..\r
+#PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX \r
+DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)\r
+LOCDEFS = -DPERLDLL -DPERL_CORE\r
+SUBSYS = console\r
+CXX_FLAG = -TP -GX\r
+\r
+.IF "$(USE_PERLCRT)" != "define"\r
+LIBC = msvcrt.lib\r
+.ELSE\r
+LIBC = PerlCRT.lib\r
+.ENDIF\r
+\r
+PERLEXE_RES =\r
+PERLDLL_RES =\r
+\r
+.IF "$(CFG)" == "Debug"\r
+.IF "$(CCTYPE)" == "MSVC20"\r
+OPTIMIZE = -Od -MD -Z7 -DDEBUGGING\r
+.ELSE\r
+OPTIMIZE = -Od -MD -Zi -DDEBUGGING\r
+.ENDIF\r
+LINK_DBG = -debug -pdb:none\r
+.ELSE\r
+.IF "$(CFG)" == "Optimize"\r
+# -O1 yields smaller code, which turns out to be faster than -O2\r
+#OPTIMIZE = -O2 -MD -DNDEBUG\r
+OPTIMIZE = -O1 -MD -DNDEBUG\r
+.ELSE\r
+OPTIMIZE = -Od -MD -DNDEBUG\r
+.ENDIF\r
+LINK_DBG = -release\r
+.ENDIF\r
+\r
+LIBBASEFILES = $(CRYPT_LIB) \\r
+ oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \\r
+ comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \\r
+ netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \\r
+ version.lib odbc32.lib odbccp32.lib\r
+\r
+# we add LIBC here, since we may be using PerlCRT.dll\r
+LIBFILES = $(LIBBASEFILES) $(LIBC)\r
+\r
+CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \\r
+ $(PCHFLAGS) $(OPTIMIZE)\r
+LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \\r
+ -libpath:"$(INST_COREDIR)" \\r
+ -machine:$(PROCESSOR_ARCHITECTURE)\r
+OBJOUT_FLAG = -Fo\r
+EXEOUT_FLAG = -Fe\r
+LIBOUT_FLAG = /out:\r
+\r
+.IF "$(USE_PERLCRT)" != "define"\r
+BUILDOPT += -DPERL_MSVCRT_READFIX\r
+.ENDIF\r
+\r
+.ENDIF\r
+\r
+.IF "$(USE_OBJECT)" == "define"\r
+OPTIMIZE += $(CXX_FLAG)\r
+BUILDOPT += -DPERL_OBJECT\r
+.ENDIF\r
+\r
+CFLAGS_O = $(CFLAGS) $(BUILDOPT)\r
+\r
+# used to allow local linking flags that are not propogated into Config.pm,\r
+# currently unused\r
+# -- BKS, 12-12-1999\r
+PRIV_LINK_FLAGS *=\r
+BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)\r
+\r
+#################### do not edit below this line #######################\r
+############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############\r
+\r
+o *= .obj\r
+a *= .lib\r
+\r
+LKPRE = INPUT (\r
+LKPOST = )\r
+\r
+#\r
+# Rules\r
+# \r
+\r
+.SUFFIXES : .c $(o) .dll $(a) .exe .rc .res\r
+\r
+.c$(o):\r
+ $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<\r
+\r
+.y.c:\r
+ $(NOOP)\r
+\r
+$(o).dll:\r
+.IF "$(CCTYPE)" == "BORLAND"\r
+ $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def\r
+ $(IMPLIB) $(*B).lib $@\r
+.ELIF "$(CCTYPE)" == "GCC"\r
+ $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)\r
+ $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@\r
+.ELSE\r
+ $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \\r
+ -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL) \r
+.ENDIF\r
+\r
+.rc.res:\r
+ $(RSC) -i.. $<\r
+\r
+#\r
+# various targets\r
+MINIPERL = ..\miniperl.exe\r
+MINIDIR = .\mini\r
+PERLEXE = ..\perl.exe\r
+WPERLEXE = ..\wperl.exe\r
+GLOBEXE = ..\perlglob.exe\r
+CONFIGPM = ..\lib\Config.pm\r
+MINIMOD = ..\lib\ExtUtils\Miniperl.pm\r
+X2P = ..\x2p\a2p.exe\r
+\r
+PL2BAT = bin\pl2bat.pl\r
+GLOBBAT = bin\perlglob.bat\r
+\r
+UTILS = \\r
+ ..\utils\h2ph \\r
+ ..\utils\splain \\r
+ ..\utils\dprofpp \\r
+ ..\utils\perlbug \\r
+ ..\utils\pl2pm \\r
+ ..\utils\c2ph \\r
+ ..\utils\h2xs \\r
+ ..\utils\perldoc \\r
+ ..\utils\perlcc \\r
+ ..\pod\checkpods \\r
+ ..\pod\pod2html \\r
+ ..\pod\pod2latex \\r
+ ..\pod\pod2man \\r
+ ..\pod\pod2text \\r
+ ..\pod\pod2usage \\r
+ ..\pod\podchecker \\r
+ ..\pod\podselect \\r
+ ..\x2p\find2perl \\r
+ ..\x2p\s2p \\r
+ bin\exetype.pl \\r
+ bin\runperl.pl \\r
+ bin\pl2bat.pl \\r
+ bin\perlglob.pl \\r
+ bin\search.pl\r
+\r
+.IF "$(CCTYPE)" == "BORLAND"\r
+\r
+CFGSH_TMPL = config.bc\r
+CFGH_TMPL = config_H.bc\r
+\r
+.ELIF "$(CCTYPE)" == "GCC"\r
+\r
+CFGSH_TMPL = config.gc\r
+CFGH_TMPL = config_H.gc\r
+PERLIMPLIB = ..\libperl56$(a)\r
+\r
+.ELSE\r
+\r
+CFGSH_TMPL = config.vc\r
+CFGH_TMPL = config_H.vc\r
+\r
+.ENDIF\r
+\r
+PERLIMPLIB *= ..\perl56$(a)\r
+PERLDLL = ..\perl56.dll\r
+\r
+XCOPY = xcopy /f /r /i /d\r
+RCOPY = xcopy /f /r /i /e /d\r
+NOOP = @echo\r
+\r
+#\r
+# filenames given to xsubpp must have forward slashes (since it puts\r
+# full pathnames in #line strings)\r
+XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \\r
+ -C++ -prototypes\r
+\r
+MICROCORE_SRC = \\r
+ ..\av.c \\r
+ ..\deb.c \\r
+ ..\doio.c \\r
+ ..\doop.c \\r
+ ..\dump.c \\r
+ ..\globals.c \\r
+ ..\gv.c \\r
+ ..\hv.c \\r
+ ..\mg.c \\r
+ ..\op.c \\r
+ ..\perl.c \\r
+ ..\perlapi.c \\r
+ ..\perly.c \\r
+ ..\pp.c \\r
+ ..\pp_ctl.c \\r
+ ..\pp_hot.c \\r
+ ..\pp_sys.c \\r
+ ..\regcomp.c \\r
+ ..\regexec.c \\r
+ ..\run.c \\r
+ ..\scope.c \\r
+ ..\sv.c \\r
+ ..\taint.c \\r
+ ..\toke.c \\r
+ ..\universal.c \\r
+ ..\utf8.c \\r
+ ..\util.c \\r
+ ..\xsutils.c\r
+\r
+EXTRACORE_SRC += perllib.c\r
+\r
+.IF "$(PERL_MALLOC)" == "define"\r
+EXTRACORE_SRC += ..\malloc.c\r
+.ENDIF\r
+\r
+.IF "$(USE_OBJECT)" != "define"\r
+EXTRACORE_SRC += ..\perlio.c\r
+.ENDIF\r
+\r
+WIN32_SRC = \\r
+ .\win32.c \\r
+ .\win32sck.c \\r
+ .\win32thread.c \r
+\r
+.IF "$(CRYPT_SRC)" != ""\r
+WIN32_SRC += .\$(CRYPT_SRC)\r
+.ENDIF\r
+\r
+DLL_SRC = $(DYNALOADER).c\r
+\r
+X2P_SRC = \\r
+ ..\x2p\a2p.c \\r
+ ..\x2p\hash.c \\r
+ ..\x2p\str.c \\r
+ ..\x2p\util.c \\r
+ ..\x2p\walk.c\r
+\r
+CORE_NOCFG_H = \\r
+ ..\av.h \\r
+ ..\cop.h \\r
+ ..\cv.h \\r
+ ..\dosish.h \\r
+ ..\embed.h \\r
+ ..\form.h \\r
+ ..\gv.h \\r
+ ..\handy.h \\r
+ ..\hv.h \\r
+ ..\iperlsys.h \\r
+ ..\mg.h \\r
+ ..\nostdio.h \\r
+ ..\op.h \\r
+ ..\opcode.h \\r
+ ..\perl.h \\r
+ ..\perlapi.h \\r
+ ..\perlsdio.h \\r
+ ..\perlsfio.h \\r
+ ..\perly.h \\r
+ ..\pp.h \\r
+ ..\proto.h \\r
+ ..\regexp.h \\r
+ ..\scope.h \\r
+ ..\sv.h \\r
+ ..\thread.h \\r
+ ..\unixish.h \\r
+ ..\utf8.h \\r
+ ..\util.h \\r
+ ..\warnings.h \\r
+ ..\XSUB.h \\r
+ ..\EXTERN.h \\r
+ ..\perlvars.h \\r
+ ..\intrpvar.h \\r
+ ..\thrdvar.h \\r
+ .\include\dirent.h \\r
+ .\include\netdb.h \\r
+ .\include\sys\socket.h \\r
+ .\win32.h\r
+\r
+CORE_H = $(CORE_NOCFG_H) .\config.h\r
+\r
+MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))\r
+CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))\r
+WIN32_OBJ = $(WIN32_SRC:db:+$(o))\r
+MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}\r
+MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}\r
+MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)\r
+DLL_OBJ = $(DLL_SRC:db:+$(o))\r
+X2P_OBJ = $(X2P_SRC:db:+$(o))\r
+\r
+PERLDLL_OBJ = $(CORE_OBJ)\r
+PERLEXE_OBJ = perlmain$(o)\r
+\r
+PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)\r
+\r
+.IF "$(USE_SETARGV)" != ""\r
+SETARGV_OBJ = setargv$(o)\r
+.ENDIF\r
+\r
+DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \\r
+ Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \\r
+ Sys/Hostname Storable\r
+STATIC_EXT = DynaLoader\r
+NONXS_EXT = Errno\r
+\r
+DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader\r
+SOCKET = $(EXTDIR)\Socket\Socket\r
+FCNTL = $(EXTDIR)\Fcntl\Fcntl\r
+OPCODE = $(EXTDIR)\Opcode\Opcode\r
+SDBM_FILE = $(EXTDIR)\SDBM_File\SDBM_File\r
+IO = $(EXTDIR)\IO\IO\r
+POSIX = $(EXTDIR)\POSIX\POSIX\r
+ATTRS = $(EXTDIR)\attrs\attrs\r
+THREAD = $(EXTDIR)\Thread\Thread\r
+B = $(EXTDIR)\B\B\r
+RE = $(EXTDIR)\re\re\r
+DUMPER = $(EXTDIR)\Data\Dumper\Dumper\r
+ERRNO = $(EXTDIR)\Errno\Errno\r
+PEEK = $(EXTDIR)\Devel\Peek\Peek\r
+BYTELOADER = $(EXTDIR)\ByteLoader\ByteLoader\r
+DPROF = $(EXTDIR)\Devel\DProf\DProf\r
+GLOB = $(EXTDIR)\File\Glob\Glob\r
+HOSTNAME = $(EXTDIR)\Sys\Hostname\Hostname\r
+STORABLE = $(EXTDIR)\Storable\Storable\r
+\r
+SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll\r
+FCNTL_DLL = $(AUTODIR)\Fcntl\Fcntl.dll\r
+OPCODE_DLL = $(AUTODIR)\Opcode\Opcode.dll\r
+SDBM_FILE_DLL = $(AUTODIR)\SDBM_File\SDBM_File.dll\r
+IO_DLL = $(AUTODIR)\IO\IO.dll\r
+POSIX_DLL = $(AUTODIR)\POSIX\POSIX.dll\r
+ATTRS_DLL = $(AUTODIR)\attrs\attrs.dll\r
+THREAD_DLL = $(AUTODIR)\Thread\Thread.dll\r
+B_DLL = $(AUTODIR)\B\B.dll\r
+DUMPER_DLL = $(AUTODIR)\Data\Dumper\Dumper.dll\r
+PEEK_DLL = $(AUTODIR)\Devel\Peek\Peek.dll\r
+RE_DLL = $(AUTODIR)\re\re.dll\r
+BYTELOADER_DLL = $(AUTODIR)\ByteLoader\ByteLoader.dll\r
+DPROF_DLL = $(AUTODIR)\Devel\DProf\DProf.dll\r
+GLOB_DLL = $(AUTODIR)\File\Glob\Glob.dll\r
+HOSTNAME_DLL = $(AUTODIR)\Sys\Hostname\Hostname.dll\r
+STORABLE_DLL = $(AUTODIR)\Storable\Storable.dll\r
+\r
+ERRNO_PM = $(LIBDIR)\Errno.pm\r
+\r
+EXTENSION_C = \\r
+ $(SOCKET).c \\r
+ $(FCNTL).c \\r
+ $(OPCODE).c \\r
+ $(SDBM_FILE).c \\r
+ $(IO).c \\r
+ $(POSIX).c \\r
+ $(ATTRS).c \\r
+ $(THREAD).c \\r
+ $(RE).c \\r
+ $(DUMPER).c \\r
+ $(PEEK).c \\r
+ $(B).c \\r
+ $(BYTELOADER).c \\r
+ $(DPROF).c \\r
+ $(GLOB).c \\r
+ $(HOSTNAME).c \\r
+ $(STORABLE).c\r
+\r
+EXTENSION_DLL = \\r
+ $(SOCKET_DLL) \\r
+ $(FCNTL_DLL) \\r
+ $(OPCODE_DLL) \\r
+ $(SDBM_FILE_DLL)\\r
+ $(IO_DLL) \\r
+ $(POSIX_DLL) \\r
+ $(ATTRS_DLL) \\r
+ $(DUMPER_DLL) \\r
+ $(PEEK_DLL) \\r
+ $(B_DLL) \\r
+ $(RE_DLL) \\r
+ $(THREAD_DLL) \\r
+ $(BYTELOADER_DLL) \\r
+ $(DPROF_DLL) \\r
+ $(GLOB_DLL) \\r
+ $(HOSTNAME_DLL) \\r
+ $(STORABLE_DLL)\r
+\r
+EXTENSION_PM = \\r
+ $(ERRNO_PM)\r
+\r
+POD2HTML = $(PODDIR)\pod2html\r
+POD2MAN = $(PODDIR)\pod2man\r
+POD2LATEX = $(PODDIR)\pod2latex\r
+POD2TEXT = $(PODDIR)\pod2text\r
+\r
+# vars must be separated by "\t+~\t+", since we're using the tempfile\r
+# version of config_sh.pl (we were overflowing someone's buffer by\r
+# trying to fit them all on the command line)\r
+# -- BKS 10-17-1999\r
+CFG_VARS = \\r
+ INST_DRV=$(INST_DRV) ~ \\r
+ INST_TOP=$(INST_TOP:s/\/\\/) ~ \\r
+ INST_VER=$(INST_VER:s/\/\\/) ~ \\r
+ INST_ARCH=$(INST_ARCH) ~ \\r
+ archname=$(ARCHNAME) ~ \\r
+ cc=$(CC) ~ \\r
+ ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \\r
+ cf_email=$(EMAIL) ~ \\r
+ d_crypt=$(D_CRYPT) ~ \\r
+ d_mymalloc=$(PERL_MALLOC) ~ \\r
+ libs=$(LIBFILES:f) ~ \\r
+ incpath=$(CCINCDIR:s/\/\\/) ~ \\r
+ libperl=$(PERLIMPLIB:f) ~ \\r
+ libpth=$(CCLIBDIR:s/\/\\/);$(EXTRALIBDIRS:s/\/\\/) ~ \\r
+ libc=$(LIBC) ~ \\r
+ make=dmake ~ \\r
+ _o=$(o) obj_ext=$(o) ~ \\r
+ _a=$(a) lib_ext=$(a) ~ \\r
+ static_ext=$(STATIC_EXT) ~ \\r
+ dynamic_ext=$(DYNAMIC_EXT) ~ \\r
+ nonxs_ext=$(NONXS_EXT) ~ \\r
+ use5005threads=$(USE_5005THREADS) ~ \\r
+ useithreads=$(USE_ITHREADS) ~ \\r
+ usethreads=$(USE_5005THREADS) ~ \\r
+ usemultiplicity=$(USE_MULTI) ~ \\r
+ LINK_FLAGS=$(LINK_FLAGS:s/\/\\/) ~ \\r
+ optimize=$(OPTIMIZE)\r
+\r
+#\r
+# set up targets varying between Win95 and WinNT builds\r
+#\r
+\r
+.IF "$(IS_WIN95)" == "define"\r
+MK2 = .\makefile.95\r
+RIGHTMAKE = __switch_makefiles\r
+NOOP = @rem\r
+.ELSE\r
+MK2 = __not_needed\r
+RIGHTMAKE = __not_needed\r
+.ENDIF\r
+\r
+#\r
+# Top targets\r
+#\r
+\r
+all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \\r
+ $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \\r
+ $(X2P) $(EXTENSION_DLL) $(EXTENSION_PM)\r
+\r
+$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c\r
+\r
+#----------------------------------------------------------------\r
+\r
+#-------------------- BEGIN Win95 SPECIFIC ----------------------\r
+\r
+# this target is a jump-off point for Win95\r
+# 1. it switches to the Win95-specific makefile if it exists\r
+# (__do_switch_makefiles)\r
+# 2. it prints a message when the Win95-specific one finishes (__done)\r
+# 3. it then kills this makefile by trying to make __no_such_target\r
+\r
+__switch_makefiles: __do_switch_makefiles __done __no_such_target\r
+\r
+__do_switch_makefiles:\r
+.IF "$(NOTFIRST)" != "true"\r
+ if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true\r
+.ELSE\r
+ $(NOOP)\r
+.ENDIF\r
+\r
+.IF "$(NOTFIRST)" != "true"\r
+__done:\r
+ @echo Build process complete. Ignore any errors after this message.\r
+ @echo Run "dmake test" to test and "dmake install" to install\r
+\r
+.ELSE\r
+# dummy targets for Win95-specific makefile\r
+\r
+__done:\r
+ $(NOOP)\r
+\r
+__no_such_target:\r
+ $(NOOP)\r
+\r
+.ENDIF\r
+\r
+# This target is used to generate the new makefile (.\makefile.95) for Win95\r
+\r
+.\makefile.95: .\makefile.mk\r
+ $(MINIPERL) genmk95.pl makefile.mk $(MK2)\r
+\r
+#--------------------- END Win95 SPECIFIC ---------------------\r
+\r
+# a blank target for when builds don't need to do certain things\r
+# this target added for Win95 port but used to keep the WinNT port able to \r
+# use this file\r
+__not_needed:\r
+ $(NOOP)\r
+\r
+$(GLOBEXE) : perlglob$(o)\r
+.IF "$(CCTYPE)" == "BORLAND"\r
+ $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c\r
+ $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \\r
+ "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,\r
+.ELIF "$(CCTYPE)" == "GCC"\r
+ $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)\r
+.ELSE\r
+ $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \\r
+ perlglob$(o) setargv$(o) \r
+.ENDIF\r
+\r
+perlglob$(o) : perlglob.c\r
+\r
+config.w32 : $(CFGSH_TMPL)\r
+ copy $(CFGSH_TMPL) config.w32\r
+\r
+.\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)\r
+ -del /f config.h\r
+ copy $(CFGH_TMPL) config.h\r
+\r
+..\config.sh : config.w32 $(MINIPERL) config_sh.PL\r
+ $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \\r
+ $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh\r
+\r
+# this target is for when changes to the main config.sh happen\r
+# edit config.{b,v,g}c and make this target once for each supported\r
+# compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)\r
+regen_config_h:\r
+ perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \\r
+ $(CFGSH_TMPL) > ..\config.sh\r
+ -cd .. && del /f perl.exe\r
+ cd .. && perl configpm\r
+ -del /f $(CFGH_TMPL)\r
+ -mkdir $(COREDIR)\r
+ -perl -I..\lib config_h.PL "INST_VER=$(INST_VER)"\r
+ rename config.h $(CFGH_TMPL)\r
+\r
+$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl\r
+ cd .. && miniperl configpm\r
+ if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)\r
+ $(XCOPY) ..\*.h $(COREDIR)\*.*\r
+ $(XCOPY) *.h $(COREDIR)\*.*\r
+ $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*\r
+ $(RCOPY) include $(COREDIR)\*.*\r
+ $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \\r
+ || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)\r
+\r
+$(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)\r
+.IF "$(CCTYPE)" == "BORLAND"\r
+ $(LINK32) -Tpe -ap $(BLINK_FLAGS) \\r
+ @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)\r
+.ELIF "$(CCTYPE)" == "GCC"\r
+ $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \\r
+ $(mktmp $(LKPRE) $(MINI_OBJ:s,\,\\) $(LIBFILES) $(LKPOST)) \r
+.ELSE\r
+ $(LINK32) -subsystem:console -out:$@ \\r
+ @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,\\))\r
+.ENDIF\r
+\r
+$(MINIDIR) :\r
+ if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"\r
+\r
+$(MINICORE_OBJ) : $(CORE_NOCFG_H)\r
+ $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c\r
+\r
+$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)\r
+ $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c\r
+\r
+# -DPERL_IMPLICIT_SYS needs C++ for perllib.c\r
+# rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless\r
+# unless the .IF is true), so instead we use a .ELSE with the default.\r
+# This is the only file that depends on perlhost.h, vmem.h, and vdir.h\r
+\r
+perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h\r
+.IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef"\r
+ $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c\r
+.ELSE\r
+ $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c\r
+.ENDIF\r
+\r
+# 1. we don't want to rebuild miniperl.exe when config.h changes\r
+# 2. we don't want to rebuild miniperl.exe with non-default config.h\r
+$(MINI_OBJ) : $(CORE_NOCFG_H)\r
+\r
+$(WIN32_OBJ) : $(CORE_H)\r
+$(CORE_OBJ) : $(CORE_H)\r
+$(DLL_OBJ) : $(CORE_H)\r
+$(X2P_OBJ) : $(CORE_H)\r
+\r
+perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl\r
+ $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \\r
+ $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def\r
+\r
+$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)\r
+.IF "$(CCTYPE)" == "BORLAND"\r
+ $(LINK32) -Tpd -ap $(BLINK_FLAGS) \\r
+ @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,\\)\n \\r
+ $@,\n \\r
+ $(LIBFILES)\n \\r
+ perldll.def\n)\r
+ $(IMPLIB) $*.lib $@\r
+.ELIF "$(CCTYPE)" == "GCC"\r
+ $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \\r
+ $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))\r
+ dlltool --output-lib $(PERLIMPLIB) \\r
+ --dllname $(PERLDLL:b).dll \\r
+ --def perldll.def \\r
+ --base-file perl.base \\r
+ --output-exp perl.exp\r
+ $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \\r
+ $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) \\r
+ perl.exp $(LKPOST))\r
+.ELSE\r
+ $(LINK32) -dll -def:perldll.def -out:$@ \\r
+ @$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \\r
+ $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,\\))\r
+.ENDIF\r
+ $(XCOPY) $(PERLIMPLIB) $(COREDIR)\r
+\r
+$(MINIMOD) : $(MINIPERL) ..\minimod.pl\r
+ cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm\r
+\r
+..\x2p\a2p$(o) : ..\x2p\a2p.c\r
+ $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c\r
+\r
+..\x2p\hash$(o) : ..\x2p\hash.c\r
+ $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c\r
+\r
+..\x2p\str$(o) : ..\x2p\str.c\r
+ $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c\r
+\r
+..\x2p\util$(o) : ..\x2p\util.c\r
+ $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c\r
+\r
+..\x2p\walk$(o) : ..\x2p\walk.c\r
+ $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c\r
+\r
+$(X2P) : $(MINIPERL) $(X2P_OBJ)\r
+ $(MINIPERL) ..\x2p\find2perl.PL\r
+ $(MINIPERL) ..\x2p\s2p.PL\r
+.IF "$(CCTYPE)" == "BORLAND"\r
+ $(LINK32) -Tpe -ap $(BLINK_FLAGS) \\r
+ @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)\r
+.ELIF "$(CCTYPE)" == "GCC"\r
+ $(LINK32) -v -o $@ $(BLINK_FLAGS) \\r
+ $(mktmp $(LKPRE) $(X2P_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))\r
+.ELSE\r
+ $(LINK32) -subsystem:console -out:$@ \\r
+ @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,\\))\r
+.ENDIF\r
+\r
+perlmain.c : runperl.c \r
+ copy runperl.c perlmain.c\r
+\r
+perlmain$(o) : perlmain.c\r
+ $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c\r
+\r
+$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)\r
+.IF "$(CCTYPE)" == "BORLAND"\r
+ $(LINK32) -Tpe -ap $(BLINK_FLAGS) \\r
+ @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,\\)\n \\r
+ $(@:s,\,\\),\n \\r
+ $(PERLIMPLIB) $(LIBFILES)\n)\r
+.ELIF "$(CCTYPE)" == "GCC"\r
+ $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \\r
+ $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)\r
+.ELSE\r
+ $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \\r
+ $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)\r
+.ENDIF\r
+ copy $(PERLEXE) $(WPERLEXE)\r
+ $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS\r
+ copy splittree.pl .. \r
+ $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)\r
+\r
+$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)\r
+ if not exist $(AUTODIR) mkdir $(AUTODIR)\r
+ cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL\r
+ cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL\r
+ $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)\r
+ $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)\r
+ cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c\r
+ $(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .\r
+\r
+$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs\r
+ copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs\r
+\r
+$(DUMPER_DLL): $(PERLEXE) $(DUMPER).xs\r
+ cd $(EXTDIR)\Data\$(*B) && \\r
+ ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl\r
+ cd $(EXTDIR)\Data\$(*B) && $(MAKE)\r
+\r
+$(DPROF_DLL): $(PERLEXE) $(DPROF).xs\r
+ cd $(EXTDIR)\Devel\$(*B) && \\r
+ ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl\r
+ cd $(EXTDIR)\Devel\$(*B) && $(MAKE)\r
+\r
+$(GLOB_DLL): $(PERLEXE) $(GLOB).xs\r
+ cd $(EXTDIR)\File\$(*B) && \\r
+ ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl\r
+ cd $(EXTDIR)\File\$(*B) && $(MAKE)\r
+\r
+$(PEEK_DLL): $(PERLEXE) $(PEEK).xs\r
+ cd $(EXTDIR)\Devel\$(*B) && \\r
+ ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl\r
+ cd $(EXTDIR)\Devel\$(*B) && $(MAKE)\r
+\r
+$(RE_DLL): $(PERLEXE) $(RE).xs\r
+ cd $(EXTDIR)\$(*B) && \\r
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl\r
+ cd $(EXTDIR)\$(*B) && $(MAKE)\r
+\r
+$(B_DLL): $(PERLEXE) $(B).xs\r
+ cd $(EXTDIR)\$(*B) && \\r
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl\r
+ cd $(EXTDIR)\$(*B) && $(MAKE)\r
+\r
+$(THREAD_DLL): $(PERLEXE) $(THREAD).xs\r
+ cd $(EXTDIR)\$(*B) && \\r
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl\r
+ cd $(EXTDIR)\$(*B) && $(MAKE)\r
+\r
+$(ATTRS_DLL): $(PERLEXE) $(ATTRS).xs\r
+ cd $(EXTDIR)\$(*B) && \\r
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl\r
+ cd $(EXTDIR)\$(*B) && $(MAKE)\r
+\r
+$(POSIX_DLL): $(PERLEXE) $(POSIX).xs\r
+ cd $(EXTDIR)\$(*B) && \\r
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl\r
+ cd $(EXTDIR)\$(*B) && $(MAKE)\r
+\r
+$(IO_DLL): $(PERLEXE) $(IO).xs\r
+ cd $(EXTDIR)\$(*B) && \\r
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl\r
+ cd $(EXTDIR)\$(*B) && $(MAKE)\r
+\r
+$(SDBM_FILE_DLL) : $(PERLEXE) $(SDBM_FILE).xs\r
+ cd $(EXTDIR)\$(*B) && \\r
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl\r
+ cd $(EXTDIR)\$(*B) && $(MAKE)\r
+\r
+$(FCNTL_DLL): $(PERLEXE) $(FCNTL).xs\r
+ cd $(EXTDIR)\$(*B) && \\r
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl\r
+ cd $(EXTDIR)\$(*B) && $(MAKE)\r
+\r
+$(OPCODE_DLL): $(PERLEXE) $(OPCODE).xs\r
+ cd $(EXTDIR)\$(*B) && \\r
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl\r
+ cd $(EXTDIR)\$(*B) && $(MAKE)\r
+\r
+$(SOCKET_DLL): $(PERLEXE) $(SOCKET).xs\r
+ cd $(EXTDIR)\$(*B) && \\r
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl\r
+ cd $(EXTDIR)\$(*B) && $(MAKE)\r
+\r
+$(HOSTNAME_DLL): $(PERLEXE) $(HOSTNAME).xs\r
+ cd $(EXTDIR)\Sys\$(*B) && \\r
+ ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl\r
+ cd $(EXTDIR)\Sys\$(*B) && $(MAKE)\r
+\r
+$(BYTELOADER_DLL): $(PERLEXE) $(BYTELOADER).xs\r
+ cd $(EXTDIR)\$(*B) && \\r
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl\r
+ cd $(EXTDIR)\$(*B) && $(MAKE)\r
+\r
+$(STORABLE_DLL): $(PERLEXE) $(STORABLE).xs\r
+ cd $(EXTDIR)\$(*B) && \\r
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl\r
+ cd $(EXTDIR)\$(*B) && $(MAKE)\r
+\r
+$(ERRNO_PM): $(PERLEXE) $(ERRNO)_pm.PL\r
+ cd $(EXTDIR)\$(*B) && \\r
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl\r
+ cd $(EXTDIR)\$(*B) && $(MAKE)\r
+\r
+doc: $(PERLEXE)\r
+ $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \\r
+ --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\\r
+ --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse\r
+\r
+utils: $(PERLEXE) $(X2P)\r
+ cd ..\utils && $(MAKE) PERL=$(MINIPERL)\r
+ copy ..\README.amiga ..\pod\perlamiga.pod\r
+ copy ..\README.cygwin ..\pod\perlcygwin.pod\r
+ copy ..\README.dos ..\pod\perldos.pod\r
+ copy ..\README.hpux ..\pod\perlhpux.pod\r
+ copy ..\README.machten ..\pod\perlmachten.pod\r
+ copy ..\README.os2 ..\pod\perlos2.pod\r
+ copy ..\README.os2 ..\pod\perlos2.pod\r
+ copy ..\vms\perlvms.pod ..\pod\perlvms.pod\r
+ cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters\r
+ cd ..\lib && $(PERLEXE) lib_pm.PL\r
+ $(PERLEXE) $(PL2BAT) $(UTILS)\r
+\r
+distclean: clean\r
+ -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \\r
+ $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)\r
+ -del /f *.def *.map\r
+ -del /f $(EXTENSION_DLL) $(EXTENSION_PM)\r
+ -del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm\r
+ -del /f $(EXTDIR)\DynaLoader\dl_win32.xs\r
+ -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm\r
+ -del /f $(LIBDIR)\XSLoader.pm\r
+ -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm\r
+ -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm\r
+ -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm\r
+ -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm\r
+ -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm\r
+ -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm\r
+ -del /f $(LIBDIR)\File\Glob.pm\r
+ -del /f $(LIBDIR)\Storable.pm\r
+ -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO\r
+ -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread\r
+ -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B\r
+ -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data\r
+ -del /f $(PODDIR)\*.html\r
+ -del /f $(PODDIR)\*.bat\r
+ -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc \\r
+ dprofpp *.bat\r
+ -cd ..\x2p && del /f find2perl s2p *.bat\r
+ -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new\r
+ -del /f $(CONFIGPM)\r
+ -del /f bin\*.bat\r
+ -cd $(EXTDIR) && del /s *$(a) *.def *.map *.pdb *.bs Makefile *$(o) \\r
+ pm_to_blib\r
+ -if exist $(AUTODIR) rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR)\r
+ -if exist $(COREDIR) rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR)\r
+\r
+install : all installbare installhtml\r
+\r
+installbare : $(RIGHTMAKE) utils\r
+ $(PERLEXE) ..\installperl\r
+ if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*\r
+ $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*\r
+ $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*\r
+\r
+installhtml : doc\r
+ $(RCOPY) html\*.* $(INST_HTML)\*.*\r
+\r
+inst_lib : $(CONFIGPM)\r
+ copy splittree.pl .. \r
+ $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)\r
+ $(RCOPY) ..\lib $(INST_LIB)\*.*\r
+\r
+minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils\r
+ $(XCOPY) $(MINIPERL) ..\t\perl.exe\r
+.IF "$(CCTYPE)" == "BORLAND"\r
+ $(XCOPY) $(GLOBBAT) ..\t\$(NULL)\r
+.ELSE\r
+ $(XCOPY) $(GLOBEXE) ..\t\$(NULL)\r
+.ENDIF\r
+ attrib -r ..\t\*.*\r
+ copy test ..\t\r
+ cd ..\t && \\r
+ $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t\r
+\r
+test-prep : all utils\r
+ $(XCOPY) $(PERLEXE) ..\t\$(NULL)\r
+ $(XCOPY) $(PERLDLL) ..\t\$(NULL)\r
+.IF "$(CCTYPE)" == "BORLAND"\r
+ $(XCOPY) $(GLOBBAT) ..\t\$(NULL)\r
+.ELSE\r
+ $(XCOPY) $(GLOBEXE) ..\t\$(NULL)\r
+.ENDIF\r
+\r
+test : $(RIGHTMAKE) test-prep\r
+ cd ..\t && $(PERLEXE) -I..\lib harness\r
+\r
+test-notty : test-prep\r
+ set PERL_SKIP_TTY_TEST=1 && \\r
+ cd ..\t && $(PERLEXE) -I.\lib harness\r
+\r
+test-wide : test-prep\r
+ set HARNESS_PERL_SWITCHES=-C && \\r
+ cd ..\t && $(PERLEXE) -I..\lib harness\r
+\r
+test-wide-notty : test-prep\r
+ set PERL_SKIP_TTY_TEST=1 && \\r
+ set HARNESS_PERL_SWITCHES=-C && \\r
+ cd ..\t && $(PERLEXE) -I..\lib harness\r
+\r
+clean : \r
+ -@erase miniperlmain$(o)\r
+ -@erase $(MINIPERL)\r
+ -@erase perlglob$(o)\r
+ -@erase perlmain$(o)\r
+ -@erase config.w32\r
+ -@erase /f config.h\r
+ -@erase $(GLOBEXE)\r
+ -@erase $(PERLEXE)\r
+ -@erase $(WPERLEXE)\r
+ -@erase $(PERLDLL)\r
+ -@erase $(CORE_OBJ)\r
+ -if exist $(MINIDIR) rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR)\r
+ -@erase $(WIN32_OBJ)\r
+ -@erase $(DLL_OBJ)\r
+ -@erase $(X2P_OBJ)\r
+ -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res\r
+ -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat\r
+ -@erase ..\x2p\*.exe ..\x2p\*.bat\r
+ -@erase *.ilk\r
+ -@erase *.pdb\r
+\r
+# Handy way to run perlbug -ok without having to install and run the\r
+# installed perlbug. We don't re-run the tests here - we trust the user.\r
+# Please *don't* use this unless all tests pass.\r
+# If you want to report test failures, use "dmake nok" instead.\r
+ok: utils\r
+ $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"\r
+\r
+okfile: utils\r
+ $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok\r
+ \r
+nok: utils\r
+ $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"\r
+ \r
+nokfile: utils\r
+ $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok\r
projects / platform / upstream / perl.git / commitdiff