ALSA: asihpi - Remove int flag polling code preparing for stream interrupts.

Interrupt flag used for message handshake will be required for
stream interrupts, so conditionally compiled code without
HPI6205_NO_HSR_POLL defined can never be used;  removing it.

Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

diff --git a/sound/pci/asihpi/hpi6205.c b/sound/pci/asihpi/hpi6205.c
index 5fe535b..cbf79a9 100644 (file)
--- a/sound/pci/asihpi/hpi6205.c
+++ b/sound/pci/asihpi/hpi6205.c
@@ -527,10 +527,6 @@ static u16 create_adapter_obj(struct hpi_adapter_obj *pao,
        struct hpi_hw_obj *phw = pao->priv;
        struct bus_master_interface *interface;
        u32 phys_addr;
-#ifndef HPI6205_NO_HSR_POLL
-       u32 time_out = HPI6205_TIMEOUT;
-       u32 temp1;
-#endif
        int i;
        u16 err;
 
@@ -584,27 +580,6 @@ static u16 create_adapter_obj(struct hpi_adapter_obj *pao,
 
        interface = phw->p_interface_buffer;
 
-#ifndef HPI6205_NO_HSR_POLL
-       /* wait for first interrupt indicating the DSP init is done */
-       time_out = HPI6205_TIMEOUT * 10;
-       temp1 = 0;
-       while (((temp1 & C6205_HSR_INTSRC) == 0) && --time_out)
-               temp1 = ioread32(phw->prHSR);
-
-       if (temp1 & C6205_HSR_INTSRC)
-               HPI_DEBUG_LOG(INFO,
-                       "Interrupt confirming DSP code running OK\n");
-       else {
-               HPI_DEBUG_LOG(ERROR,
-                       "Timed out waiting for interrupt "
-                       "confirming DSP code running\n");
-               return HPI6205_ERROR_6205_NO_IRQ;
-       }
-
-       /* reset the interrupt */
-       iowrite32(C6205_HSR_INTSRC, phw->prHSR);
-#endif
-
        /* make sure the DSP has started ok */
        if (!wait_dsp_ack(phw, H620_HIF_RESET, HPI6205_TIMEOUT * 10)) {
                HPI_DEBUG_LOG(ERROR, "timed out waiting reset state \n");
@@ -1982,9 +1957,6 @@ static short hpi6205_transfer_data(struct hpi_adapter_obj *pao, u8 *p_data,
        struct hpi_hw_obj *phw = pao->priv;
        u32 data_transferred = 0;
        u16 err = 0;
-#ifndef HPI6205_NO_HSR_POLL
-       u32 time_out;
-#endif
        u32 temp2;
        struct bus_master_interface *interface = phw->p_interface_buffer;
 
@@ -2009,14 +1981,10 @@ static short hpi6205_transfer_data(struct hpi_adapter_obj *pao, u8 *p_data,
 
                interface->transfer_size_in_bytes = this_copy;
 
-#ifdef HPI6205_NO_HSR_POLL
                /* DSP must change this back to nOperation */
                interface->dsp_ack = H620_HIF_IDLE;
-#endif
-
                send_dsp_command(phw, operation);
 
-#ifdef HPI6205_NO_HSR_POLL
                temp2 = wait_dsp_ack(phw, operation, HPI6205_TIMEOUT);
                HPI_DEBUG_LOG(DEBUG, "spun %d times for data xfer of %d\n",
                        HPI6205_TIMEOUT - temp2, this_copy);
@@ -2029,40 +1997,6 @@ static short hpi6205_transfer_data(struct hpi_adapter_obj *pao, u8 *p_data,
 
                        break;
                }
-#else
-               /* spin waiting on the result */
-               time_out = HPI6205_TIMEOUT;
-               temp2 = 0;
-               while ((temp2 == 0) && time_out--) {
-                       /* give 16k bus mastering transfer time to happen */
-                       /*(16k / 132Mbytes/s = 122usec) */
-                       hpios_delay_micro_seconds(20);
-                       temp2 = ioread32(phw->prHSR);
-                       temp2 &= C6205_HSR_INTSRC;
-               }
-               HPI_DEBUG_LOG(DEBUG, "spun %d times for data xfer of %d\n",
-                       HPI6205_TIMEOUT - time_out, this_copy);
-               if (temp2 == C6205_HSR_INTSRC) {
-                       HPI_DEBUG_LOG(VERBOSE,
-                               "Interrupt from HIF <data> OK\n");
-                       /*
-                          if(interface->dwDspAck != nOperation) {
-                          HPI_DEBUG_LOG(DEBUG("interface->dwDspAck=%d,
-                          expected %d \n",
-                          interface->dwDspAck,nOperation);
-                          }
-                        */
-               }
-/* need to handle this differently... */
-               else {
-                       HPI_DEBUG_LOG(ERROR,
-                               "Interrupt from HIF <data> BAD\n");
-                       err = HPI_ERROR_DSP_HARDWARE;
-               }
-
-               /* reset the interrupt from the DSP */
-               iowrite32(C6205_HSR_INTSRC, phw->prHSR);
-#endif
                if (operation == H620_HIF_GET_DATA)
                        memcpy(&p_data[data_transferred],
                                (void *)&interface->u.b_data[0], this_copy);
@@ -2119,9 +2053,6 @@ static unsigned int message_count;
 static u16 message_response_sequence(struct hpi_adapter_obj *pao,
        struct hpi_message *phm, struct hpi_response *phr)
 {
-#ifndef HPI6205_NO_HSR_POLL
-       u32 temp2;
-#endif
        u32 time_out, time_out2;
        struct hpi_hw_obj *phw = pao->priv;
        struct bus_master_interface *interface = phw->p_interface_buffer;
@@ -2164,38 +2095,6 @@ static u16 message_response_sequence(struct hpi_adapter_obj *pao,
        /* spin waiting on HIF interrupt flag (end of msg process) */
        time_out = HPI6205_TIMEOUT;
 
-#ifndef HPI6205_NO_HSR_POLL
-       temp2 = 0;
-       while ((temp2 == 0) && --time_out) {
-               temp2 = ioread32(phw->prHSR);
-               temp2 &= C6205_HSR_INTSRC;
-               hpios_delay_micro_seconds(1);
-       }
-       if (temp2 == C6205_HSR_INTSRC) {
-               rmb();  /* ensure we see latest value for dsp_ack */
-               if ((interface->dsp_ack != H620_HIF_GET_RESP)) {
-                       HPI_DEBUG_LOG(DEBUG,
-                               "(%u)interface->dsp_ack(0x%x) != "
-                               "H620_HIF_GET_RESP, t=%u\n", message_count,
-                               interface->dsp_ack,
-                               HPI6205_TIMEOUT - time_out);
-               } else {
-                       HPI_DEBUG_LOG(VERBOSE,
-                               "(%u)int with GET_RESP after %u\n",
-                               message_count, HPI6205_TIMEOUT - time_out);
-               }
-
-       } else {
-               /* can we do anything else in response to the error ? */
-               HPI_DEBUG_LOG(ERROR,
-                       "Interrupt from HIF module BAD (function %x)\n",
-                       phm->function);
-       }
-
-       /* reset the interrupt from the DSP */
-       iowrite32(C6205_HSR_INTSRC, phw->prHSR);
-#endif
-
        /* read the result */
        if (time_out) {
                if (interface->u.response_buffer.size <= phr->size)

diff --git a/sound/pci/asihpi/hpi6205.h b/sound/pci/asihpi/hpi6205.h
index e00edb0..df2f02c 100644 (file)
--- a/sound/pci/asihpi/hpi6205.h
+++ b/sound/pci/asihpi/hpi6205.h
@@ -25,9 +25,6 @@ Copyright AudioScience, Inc., 2003
 #ifndef _HPI6205_H_
 #define _HPI6205_H_
 
-/* transitional conditional compile shared between host and DSP */
-/* #define HPI6205_NO_HSR_POLL */
-
 #include "hpi_internal.h"
 
 /***********************************************************