mmc: dw_mmc: update kernel-doc comments for dw_mci

cur_slot and num_slots has been removed from struct dw_mci in 42f989c002f2.
Unfortunately, inline documentation was not updated so far.

Fix @lock field documentation in Locking section.
Move @mrq field of struct dw_mci_slot mention closer to it
description, so no one could miss this slightest detail.

Couple of code style fixes as a bonus.

Signed-off-by: Alexey Roslyakov <alexey.roslyakov@gmail.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h
index 1424bd4..9c7085a 100644 (file)
--- a/drivers/mmc/host/dw_mmc.h
+++ b/drivers/mmc/host/dw_mmc.h
@@ -65,8 +65,7 @@ struct dw_mci_dma_slave {
  * @fifo_reg: Pointer to MMIO registers for data FIFO
  * @sg: Scatterlist entry currently being processed by PIO code, if any.
  * @sg_miter: PIO mapping scatterlist iterator.
- * @cur_slot: The slot which is currently using the controller.
- * @mrq: The request currently being processed on @cur_slot,
+ * @mrq: The request currently being processed on @slot,
  *     or NULL if the controller is idle.
  * @cmd: The command currently being sent to the card, or NULL.
  * @data: The data currently being transferred, or NULL if no data
@@ -102,7 +101,6 @@ struct dw_mci_dma_slave {
  * @bus_hz: The rate of @mck in Hz. This forms the basis for MMC bus
  *     rate and timeout calculations.
  * @current_speed: Configured rate of the controller.
- * @num_slots: Number of slots available.
  * @fifoth_val: The value of FIFOTH register.
  * @verid: Denote Version ID.
  * @dev: Device associated with the MMC controller.
@@ -134,17 +132,17 @@ struct dw_mci_dma_slave {
  * =======
  *
  * @lock is a softirq-safe spinlock protecting @queue as well as
+ * @slot, @mrq and @state. These must always be updated
  * at the same time while holding @lock.
+ * The @mrq field of struct dw_mci_slot is also protected by @lock,
+ * and must always be written at the same time as the slot is added to
+ * @queue.
  *
  * @irq_lock is an irq-safe spinlock protecting the INTMASK register
  * to allow the interrupt handler to modify it directly.  Held for only long
  * enough to read-modify-write INTMASK and no other locks are grabbed when
  * holding this one.
  *
- * The @mrq field of struct dw_mci_slot is also protected by @lock,
- * and must always be written at the same time as the slot is added to
- * @queue.
- *
  * @pending_events and @completed_events are accessed using atomic bit
  * operations, so they don't need any locking.
  *
@@ -321,8 +319,8 @@ struct dw_mci_board {
 #define SDMMC_ENABLE_SHIFT     0x110
 #define SDMMC_DATA(x)          (x)
 /*
-* Registers to support idmac 64-bit address mode
-*/
+ * Registers to support idmac 64-bit address mode
+ */
 #define SDMMC_DBADDRL          0x088
 #define SDMMC_DBADDRU          0x08c
 #define SDMMC_IDSTS64          0x090
@@ -449,7 +447,8 @@ struct dw_mci_board {
        (SDMMC_CTRL_RESET | SDMMC_CTRL_FIFO_RESET | SDMMC_CTRL_DMA_RESET)
 
 /* FIFO register access macros. These should not change the data endian-ness
- * as they are written to memory to be dealt with by the upper layers */
+ * as they are written to memory to be dealt with by the upper layers
+ */
 #define mci_fifo_readw(__reg)  __raw_readw(__reg)
 #define mci_fifo_readl(__reg)  __raw_readl(__reg)
 #define mci_fifo_readq(__reg)  __raw_readq(__reg)