+2009-02-06 Pedro Alves <pedro@codesourcery.com>
+
+ * target.h (enum target_object): Add new TARGET_OBJECT_SIGNAL_INFO.
+ * infrun.c (siginfo_value_read, siginfo_value_write): New.
+ (siginfo_value_funcs): New.
+ (siginfo_make_value): New.
+ (_initialize_infrun): Create the $_siginfo convenience variable.
+ * gdbtypes.h (append_composite_type_field_aligned): Declare.
+ * gdbtypes.c (append_composite_type_field): Rename to...
+ (append_composite_type_field_aligned): ... this. Add ALIGNMENT
+ argument. Handle it.
+ (append_composite_type_field): Rewrite on top of
+ append_composite_type_field_aligned.
+ * value.h (internalvar_make_value): New typedef.
+ (struct internalvar) <make_value>: New field.
+ (create_internalvar_type_lazy): Declare.
+ * value.c (create_internalvar): Clear make_value.
+ (create_internalvar_type_lazy): New.
+ (value_of_internalvar): If make_value is set use it.
+ (preserve_values): Skip internal variables that don't have a
+ value.
+ * gdbarch.sh (get_siginfo_type): New.
+ * gdbarch.h, gdbarch.c: Regenerate.
+
+ * linux-tdep.h, linux-tdep.c: New.
+ * amd64-linux-tdep.c: Include "linux-tdep.h".
+ (amd64_linux_init_abi): Register linux_get_siginfo_type and
+ linux_get_siginfo_mapper.
+ * i386-linux-tdep.c: Include "linux-tdep.h".
+ (i386_linux_init_abi): Register linux_get_siginfo_type and
+ linux_get_siginfo_mapper.
+ * arm-linux-tdep.c: Include "linux-tdep.h".
+ (i386_linux_init_abi): Register linux_get_siginfo_type and
+ linux_get_siginfo_mapper.
+
+ * linux-nat.c (linux_xfer_siginfo): New.
+ (linux_nat_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
+ * remote.c (PACKET_qXfer_siginfo_read)
+ (PACKET_qXfer_siginfo_write): New.
+ (feature remote_protocol_features): Add "qXfer:siginfo:read" and
+ "qXfer:siginfo:write" features.
+ (remote_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
+ (_initialize_remote): Add "set/show remote read-siginfo-object"
+ and "set/show remote write-siginfo-object" commands.
+
+ * Makefile.in (ALL_TARGET_OBS): Add linux-tdep.o.
+ (HFILES_NO_SRCDIR): Add linux-tdep.h.
+ (ALLDEPFILES): Add linux-tdep.c.
+
+ * configure.tgt (arm*-*-linux* | arm*-*-uclinux*)
+ (i[34567]86-*-linux*, x86_64-*-linux*): Add linux-tdep.o to
+ gdb_target_obs.
+
2009-02-06 Jim Blandy <jimb@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Vladimir Prus <vladimir@codesourcery.com>
i386-sol2-tdep.o i386-tdep.o i387-tdep.o \
i386-dicos-tdep.o \
iq2000-tdep.o \
+ linux-tdep.o \
m32c-tdep.o \
m32r-linux-tdep.o m32r-tdep.o \
m68hc11-tdep.o \
config/rs6000/nm-rs6000.h top.h bsd-kvm.h gdb-stabs.h reggroups.h \
annotate.h sim-regno.h dictionary.h dfp.h main.h frame-unwind.h \
remote-fileio.h i386-linux-tdep.h vax-tdep.h objc-lang.h \
-sentinel-frame.h bcache.h symfile.h windows-tdep.h
+sentinel-frame.h bcache.h symfile.h windows-tdep.h linux-tdep.h
# Header files that already have srcdir in them, or which are in objdir.
irix5-nat.c \
libunwind-frame.c \
linux-fork.c \
+ linux-tdep.c \
m68hc11-tdep.c \
m32r-tdep.c \
m32r-linux-nat.c m32r-linux-tdep.c \
#include "gdbtypes.h"
#include "reggroups.h"
#include "amd64-linux-tdep.h"
+#include "linux-tdep.h"
#include "gdb_string.h"
simple_displaced_step_free_closure);
set_gdbarch_displaced_step_location (gdbarch,
displaced_step_at_entry_point);
+
+ set_gdbarch_get_siginfo_type (gdbarch, linux_get_siginfo_type);
}
\f
#include "arm-tdep.h"
#include "arm-linux-tdep.h"
+#include "linux-tdep.h"
#include "glibc-tdep.h"
#include "gdb_string.h"
/* Core file support. */
set_gdbarch_regset_from_core_section (gdbarch,
arm_linux_regset_from_core_section);
+
+ set_gdbarch_get_siginfo_type (gdbarch, linux_get_siginfo_type);
}
void
arm*-*-linux*)
# Target: ARM based machine running GNU/Linux
gdb_target_obs="arm-tdep.o arm-linux-tdep.o glibc-tdep.o \
- solib.o solib-svr4.o symfile-mem.o corelow.o"
+ solib.o solib-svr4.o symfile-mem.o corelow.o linux-tdep.o"
build_gdbserver=yes
;;
arm*-*-netbsd* | arm*-*-knetbsd*-gnu)
i[34567]86-*-linux*)
# Target: Intel 386 running GNU/Linux
gdb_target_obs="i386-tdep.o i386-linux-tdep.o glibc-tdep.o i387-tdep.o \
- solib.o solib-svr4.o symfile-mem.o corelow.o"
+ solib.o solib-svr4.o symfile-mem.o corelow.o linux-tdep.o"
build_gdbserver=yes
;;
i[34567]86-*-gnu*)
# Target: GNU/Linux x86-64
gdb_target_obs="amd64-tdep.o amd64-linux-tdep.o i386-tdep.o \
i387-tdep.o i386-linux-tdep.o glibc-tdep.o \
- solib.o solib-svr4.o corelow.o symfile-mem.o"
+ solib.o solib-svr4.o corelow.o symfile-mem.o linux-tdep.o"
build_gdbserver=yes
;;
x86_64-*-freebsd* | x86_64-*-kfreebsd*-gnu)
2009-02-06 Pedro Alves <pedro@codesourcery.com>
+ * gdb.texinfo (Signals): Document $_siginfo.
+ (Convenience Variables): Mention $_siginfo.
+ (Remote Configuration): Document qXfer:siginfo:read,
+ qXfer:siginfo:write packets, and the read-siginfo-object,
+ write-siginfo-object commands.
+
+2009-02-06 Pedro Alves <pedro@codesourcery.com>
+
* gdbint.texinfo (Values): New chapter.
2009-02-06 Tom Tromey <tromey@redhat.com>
you can continue with @samp{signal 0}. @xref{Signaling, ,Giving your
Program a Signal}.
+@cindex extra signal information
+@anchor{extra signal information}
+
+On some targets, @value{GDBN} can inspect extra signal information
+associated with the intercepted signal, before it is actually
+delivered to the program being debugged. This information is exported
+by the convenience variable @code{$_siginfo}, and consists of data
+that is passed by the kernel to the signal handler at the time of the
+receipt of a signal. The data type of the information itself is
+target dependent. You can see the data type using the @code{ptype
+$_siginfo} command. On Unix systems, it typically corresponds to the
+standard @code{siginfo_t} type, as defined in the @file{signal.h}
+system header.
+
+Here's an example, on a @sc{gnu}/Linux system, printing the stray
+referenced address that raised a segmentation fault.
+
+@smallexample
+@group
+(@value{GDBP}) continue
+Program received signal SIGSEGV, Segmentation fault.
+0x0000000000400766 in main ()
+69 *(int *)p = 0;
+(@value{GDBP}) ptype $_siginfo
+type = struct @{
+ int si_signo;
+ int si_errno;
+ int si_code;
+ union @{
+ int _pad[28];
+ struct @{...@} _kill;
+ struct @{...@} _timer;
+ struct @{...@} _rt;
+ struct @{...@} _sigchld;
+ struct @{...@} _sigfault;
+ struct @{...@} _sigpoll;
+ @} _sifields;
+@}
+(@value{GDBP}) ptype $_siginfo._sifields._sigfault
+type = struct @{
+ void *si_addr;
+@}
+(@value{GDBP}) p $_siginfo._sifields._sigfault.si_addr
+$1 = (void *) 0x7ffff7ff7000
+@end group
+@end smallexample
+
+Depending on target support, @code{$_siginfo} may also be writable.
+
@node Thread Stops
@section Stopping and Starting Multi-thread Programs
@vindex $_exitcode@r{, convenience variable}
The variable @code{$_exitcode} is automatically set to the exit code when
the program being debugged terminates.
+
+@item $_siginfo
+@vindex $_siginfo@r{, convenience variable}
+The variable @code{$_siginfo} is bound to extra signal information
+inspection (@pxref{extra signal information}).
@end table
On HP-UX systems, if you refer to a function or variable name that
@tab @code{qXfer:spu:write}
@tab @code{info spu}
+@item @code{read-siginfo-object}
+@tab @code{qXfer:siginfo:read}
+@tab @code{print $_siginfo}
+
+@item @code{write-siginfo-object}
+@tab @code{qXfer:siginfo:write}
+@tab @code{set $_siginfo}
+
@item @code{get-thread-local-@*storage-address}
@tab @code{qGetTLSAddr}
@tab Displaying @code{__thread} variables
@tab @samp{-}
@tab Yes
+@item @samp{qXfer:siginfo:read}
+@tab No
+@tab @samp{-}
+@tab Yes
+
+@item @samp{qXfer:siginfo:write}
+@tab No
+@tab @samp{-}
+@tab Yes
+
@item @samp{QNonStop}
@tab No
@tab @samp{-}
The remote stub understands the @samp{qXfer:spu:write} packet
(@pxref{qXfer spu write}).
+@item qXfer:siginfo:read
+The remote stub understands the @samp{qXfer:siginfo:read} packet
+(@pxref{qXfer siginfo read}).
+
+@item qXfer:siginfo:write
+The remote stub understands the @samp{qXfer:siginfo:write} packet
+(@pxref{qXfer siginfo write}).
+
@item QNonStop
The remote stub understands the @samp{QNonStop} packet
(@pxref{QNonStop}).
This packet is not probed by default; the remote stub must request it,
by supplying an appropriate @samp{qSupported} response (@pxref{qSupported}).
+@item qXfer:siginfo:read::@var{offset},@var{length}
+@anchor{qXfer siginfo read}
+Read contents of the extra signal information on the target
+system. The annex part of the generic @samp{qXfer} packet must be
+empty (@pxref{qXfer read}).
+
+This packet is not probed by default; the remote stub must request it,
+by supplying an appropriate @samp{qSupported} response
+(@pxref{qSupported}).
+
@item qXfer:spu:read:@var{annex}:@var{offset},@var{length}
@anchor{qXfer spu read}
Read contents of an @code{spufs} file on the target system. The
@item qXfer:@var{object}:write:@var{annex}:@var{offset}:@var{data}@dots{}
@cindex write data into object, remote request
+@anchor{qXfer write}
Write uninterpreted bytes into the target's special data area
identified by the keyword @var{object}, starting at @var{offset} bytes
into the data. @var{data}@dots{} is the binary-encoded data
formats, listed below.
@table @samp
+@item qXfer:siginfo:write::@var{offset}:@var{data}@dots{}
+@anchor{qXfer siginfo write}
+Write @var{data} to the extra signal information on the target system.
+The annex part of the generic @samp{qXfer} packet must be
+empty (@pxref{qXfer write}).
+
+This packet is not probed by default; the remote stub must request it,
+by supplying an appropriate @samp{qSupported} response
+(@pxref{qSupported}).
+
@item qXfer:spu:write:@var{annex}:@var{offset}:@var{data}@dots{}
@anchor{qXfer spu write}
Write @var{data} to an @code{spufs} file on the target system. The
int sofun_address_maybe_missing;
gdbarch_target_signal_from_host_ftype *target_signal_from_host;
gdbarch_target_signal_to_host_ftype *target_signal_to_host;
+ gdbarch_get_siginfo_type_ftype *get_siginfo_type;
gdbarch_record_special_symbol_ftype *record_special_symbol;
int has_global_solist;
};
0, /* sofun_address_maybe_missing */
default_target_signal_from_host, /* target_signal_from_host */
default_target_signal_to_host, /* target_signal_to_host */
+ 0, /* get_siginfo_type */
0, /* record_special_symbol */
0, /* has_global_solist */
/* startup_gdbarch() */
/* Skip verify of sofun_address_maybe_missing, invalid_p == 0 */
/* Skip verify of target_signal_from_host, invalid_p == 0 */
/* Skip verify of target_signal_to_host, invalid_p == 0 */
+ /* Skip verify of get_siginfo_type, has predicate */
/* Skip verify of record_special_symbol, has predicate */
/* Skip verify of has_global_solist, invalid_p == 0 */
buf = ui_file_xstrdup (log, &dummy);
"gdbarch_dump: get_longjmp_target = <%s>\n",
host_address_to_string (gdbarch->get_longjmp_target));
fprintf_unfiltered (file,
+ "gdbarch_dump: gdbarch_get_siginfo_type_p() = %d\n",
+ gdbarch_get_siginfo_type_p (gdbarch));
+ fprintf_unfiltered (file,
+ "gdbarch_dump: get_siginfo_type = <0x%lx>\n",
+ (long) gdbarch->get_siginfo_type);
+ fprintf_unfiltered (file,
"gdbarch_dump: has_global_solist = %s\n",
plongest (gdbarch->has_global_solist));
fprintf_unfiltered (file,
}
int
+gdbarch_get_siginfo_type_p (struct gdbarch *gdbarch)
+{
+ gdb_assert (gdbarch != NULL);
+ return gdbarch->get_siginfo_type != NULL;
+}
+
+struct type *
+gdbarch_get_siginfo_type (struct gdbarch *gdbarch)
+{
+ gdb_assert (gdbarch != NULL);
+ gdb_assert (gdbarch->get_siginfo_type != NULL);
+ if (gdbarch_debug >= 2)
+ fprintf_unfiltered (gdb_stdlog, "gdbarch_get_siginfo_type called\n");
+ return gdbarch->get_siginfo_type (gdbarch);
+}
+
+void
+set_gdbarch_get_siginfo_type (struct gdbarch *gdbarch,
+ gdbarch_get_siginfo_type_ftype get_siginfo_type)
+{
+ gdbarch->get_siginfo_type = get_siginfo_type;
+}
+
+int
gdbarch_record_special_symbol_p (struct gdbarch *gdbarch)
{
gdb_assert (gdbarch != NULL);
extern int gdbarch_target_signal_to_host (struct gdbarch *gdbarch, enum target_signal ts);
extern void set_gdbarch_target_signal_to_host (struct gdbarch *gdbarch, gdbarch_target_signal_to_host_ftype *target_signal_to_host);
+/* Extra signal info inspection.
+
+ Return a type suitable to inspect extra signal information. */
+
+extern int gdbarch_get_siginfo_type_p (struct gdbarch *gdbarch);
+
+typedef struct type * (gdbarch_get_siginfo_type_ftype) (struct gdbarch *gdbarch);
+extern struct type * gdbarch_get_siginfo_type (struct gdbarch *gdbarch);
+extern void set_gdbarch_get_siginfo_type (struct gdbarch *gdbarch, gdbarch_get_siginfo_type_ftype *get_siginfo_type);
+
/* Record architecture-specific information from the symbol table. */
extern int gdbarch_record_special_symbol_p (struct gdbarch *gdbarch);
# signal number.
m:int:target_signal_to_host:enum target_signal ts:ts::default_target_signal_to_host::0
+# Extra signal info inspection.
+#
+# Return a type suitable to inspect extra signal information.
+M:struct type *:get_siginfo_type:void:
+
# Record architecture-specific information from the symbol table.
M:void:record_special_symbol:struct objfile *objfile, asymbol *sym:objfile, sym
+2009-02-06 Pedro Alves <pedro@codesourcery.com>
+
+ * server.c (handle_query): Report qXfer:siginfo:read and
+ qXfer:siginfo:write as supported and handle them.
+ * target.h (struct target_ops) <qxfer_siginfo>: New field.
+ * linux-low.c (linux_xfer_siginfo): New.
+ (linux_target_ops): Set it.
+
2009-01-26 Pedro Alves <pedro@codesourcery.com>
* server.c (gdbserver_usage): Mention --remote-debug.
return len;
}
+static int
+linux_xfer_siginfo (const char *annex, unsigned char *readbuf,
+ unsigned const char *writebuf, CORE_ADDR offset, int len)
+{
+ struct siginfo siginfo;
+ long pid = -1;
+
+ if (current_inferior == NULL)
+ return -1;
+
+ pid = pid_of (get_thread_process (current_inferior));
+
+ if (debug_threads)
+ fprintf (stderr, "%s siginfo for lwp %ld.\n",
+ readbuf != NULL ? "Reading" : "Writing",
+ pid);
+
+ if (offset > sizeof (siginfo))
+ return -1;
+
+ if (ptrace (PTRACE_GETSIGINFO, pid, 0, &siginfo) != 0)
+ return -1;
+
+ if (offset + len > sizeof (siginfo))
+ len = sizeof (siginfo) - offset;
+
+ if (readbuf != NULL)
+ memcpy (readbuf, (char *) &siginfo + offset, len);
+ else
+ {
+ memcpy ((char *) &siginfo + offset, writebuf, len);
+ if (ptrace (PTRACE_SETSIGINFO, pid, 0, &siginfo) != 0)
+ return -1;
+ }
+
+ return len;
+}
+
static struct target_ops linux_target_ops = {
linux_create_inferior,
linux_attach,
NULL,
hostio_last_error_from_errno,
linux_qxfer_osdata,
+ linux_xfer_siginfo,
};
static void
return;
}
+ if (the_target->qxfer_siginfo != NULL
+ && strncmp ("qXfer:siginfo:read:", own_buf, 19) == 0)
+ {
+ unsigned char *data;
+ int n;
+ CORE_ADDR ofs;
+ unsigned int len;
+ char *annex;
+
+ require_running (own_buf);
+
+ /* Reject any annex; grab the offset and length. */
+ if (decode_xfer_read (own_buf + 19, &annex, &ofs, &len) < 0
+ || annex[0] != '\0')
+ {
+ strcpy (own_buf, "E00");
+ return;
+ }
+
+ /* Read one extra byte, as an indicator of whether there is
+ more. */
+ if (len > PBUFSIZ - 2)
+ len = PBUFSIZ - 2;
+ data = malloc (len + 1);
+ if (!data)
+ return;
+ n = (*the_target->qxfer_siginfo) (annex, data, NULL, ofs, len + 1);
+ if (n < 0)
+ write_enn (own_buf);
+ else if (n > len)
+ *new_packet_len_p = write_qxfer_response (own_buf, data, len, 1);
+ else
+ *new_packet_len_p = write_qxfer_response (own_buf, data, n, 0);
+
+ free (data);
+ return;
+ }
+
+ if (the_target->qxfer_siginfo != NULL
+ && strncmp ("qXfer:siginfo:write:", own_buf, 20) == 0)
+ {
+ char *annex;
+ int n;
+ unsigned int len;
+ CORE_ADDR ofs;
+ unsigned char *data;
+
+ require_running (own_buf);
+
+ strcpy (own_buf, "E00");
+ data = malloc (packet_len - 19);
+ if (!data)
+ return;
+ if (decode_xfer_write (own_buf + 20, packet_len - 20, &annex,
+ &ofs, &len, data) < 0)
+ {
+ free (data);
+ return;
+ }
+
+ n = (*the_target->qxfer_siginfo)
+ (annex, NULL, (unsigned const char *)data, ofs, len);
+ if (n < 0)
+ write_enn (own_buf);
+ else
+ sprintf (own_buf, "%x", n);
+
+ free (data);
+ return;
+ }
+
/* Protocol features query. */
if (strncmp ("qSupported", own_buf, 10) == 0
&& (own_buf[10] == ':' || own_buf[10] == '\0'))
if (the_target->qxfer_spu != NULL)
strcat (own_buf, ";qXfer:spu:read+;qXfer:spu:write+");
+ if (the_target->qxfer_siginfo != NULL)
+ strcat (own_buf, ";qXfer:siginfo:read+;qXfer:siginfo:write+");
+
/* We always report qXfer:features:read, as targets may
install XML files on a subsequent call to arch_setup.
If we reported to GDB on startup that we don't support
int (*qxfer_osdata) (const char *annex, unsigned char *readbuf,
unsigned const char *writebuf, CORE_ADDR offset,
int len);
+
+ /* Read/Write extra signal info. */
+ int (*qxfer_siginfo) (const char *annex, unsigned char *readbuf,
+ unsigned const char *writebuf,
+ CORE_ADDR offset, int len);
};
extern struct target_ops *the_target;
/* Helper function. Append a field to a composite type. */
void
-append_composite_type_field (struct type *t, char *name,
- struct type *field)
+append_composite_type_field_aligned (struct type *t, char *name,
+ struct type *field, int alignment)
{
struct field *f;
TYPE_NFIELDS (t) = TYPE_NFIELDS (t) + 1;
{
TYPE_LENGTH (t) = TYPE_LENGTH (t) + TYPE_LENGTH (field);
if (TYPE_NFIELDS (t) > 1)
- FIELD_BITPOS (f[0]) = (FIELD_BITPOS (f[-1])
- + (TYPE_LENGTH (FIELD_TYPE (f[-1]))
- * TARGET_CHAR_BIT));
+ {
+ FIELD_BITPOS (f[0]) = (FIELD_BITPOS (f[-1])
+ + (TYPE_LENGTH (FIELD_TYPE (f[-1]))
+ * TARGET_CHAR_BIT));
+
+ if (alignment)
+ {
+ int left = FIELD_BITPOS (f[0]) % (alignment * TARGET_CHAR_BIT);
+ if (left)
+ {
+ FIELD_BITPOS (f[0]) += left;
+ TYPE_LENGTH (t) += left / TARGET_CHAR_BIT;
+ }
+ }
+ }
}
}
+void
+append_composite_type_field (struct type *t, char *name,
+ struct type *field)
+{
+ append_composite_type_field_aligned (t, name, field, 0);
+}
+
int
can_dereference (struct type *t)
{
extern struct type *init_composite_type (char *name, enum type_code code);
extern void append_composite_type_field (struct type *t, char *name,
struct type *field);
+extern void append_composite_type_field_aligned (struct type *t,
+ char *name,
+ struct type *field,
+ int alignment);
/* Helper functions to construct a bit flags type. An initially empty
type is created using init_flag_type(). Flags are then added using
#include "i386-tdep.h"
#include "i386-linux-tdep.h"
+#include "linux-tdep.h"
#include "glibc-tdep.h"
#include "solib-svr4.h"
#include "symtab.h"
simple_displaced_step_free_closure);
set_gdbarch_displaced_step_location (gdbarch,
displaced_step_at_entry_point);
+
+ set_gdbarch_get_siginfo_type (gdbarch, linux_get_siginfo_type);
}
/* Provide a prototype to silence -Wmissing-prototypes. */
printf_filtered (_("\nUse the \"handle\" command to change these tables.\n"));
}
+
+/* The $_siginfo convenience variable is a bit special. We don't know
+ for sure the type of the value until we actually have a chance to
+ fetch the data. The type can change depending on gdbarch, so it it
+ also dependent on which thread you have selected.
+
+ 1. making $_siginfo be an internalvar that creates a new value on
+ access.
+
+ 2. making the value of $_siginfo be an lval_computed value. */
+
+/* This function implements the lval_computed support for reading a
+ $_siginfo value. */
+
+static void
+siginfo_value_read (struct value *v)
+{
+ LONGEST transferred;
+
+ transferred =
+ target_read (¤t_target, TARGET_OBJECT_SIGNAL_INFO,
+ NULL,
+ value_contents_all_raw (v),
+ value_offset (v),
+ TYPE_LENGTH (value_type (v)));
+
+ if (transferred != TYPE_LENGTH (value_type (v)))
+ error (_("Unable to read siginfo"));
+}
+
+/* This function implements the lval_computed support for writing a
+ $_siginfo value. */
+
+static void
+siginfo_value_write (struct value *v, struct value *fromval)
+{
+ LONGEST transferred;
+
+ transferred = target_write (¤t_target,
+ TARGET_OBJECT_SIGNAL_INFO,
+ NULL,
+ value_contents_all_raw (fromval),
+ value_offset (v),
+ TYPE_LENGTH (value_type (fromval)));
+
+ if (transferred != TYPE_LENGTH (value_type (fromval)))
+ error (_("Unable to write siginfo"));
+}
+
+static struct lval_funcs siginfo_value_funcs =
+ {
+ siginfo_value_read,
+ siginfo_value_write
+ };
+
+/* Return a new value with the correct type for the siginfo object of
+ the current thread. Return a void value if there's no object
+ available. */
+
+struct value *
+siginfo_make_value (struct internalvar *var)
+{
+ struct type *type;
+ struct gdbarch *gdbarch;
+
+ if (target_has_stack
+ && !ptid_equal (inferior_ptid, null_ptid))
+ {
+ gdbarch = get_frame_arch (get_current_frame ());
+
+ if (gdbarch_get_siginfo_type_p (gdbarch))
+ {
+ type = gdbarch_get_siginfo_type (gdbarch);
+
+ return allocate_computed_value (type, &siginfo_value_funcs, NULL);
+ }
+ }
+
+ return allocate_value (builtin_type_void);
+}
+
\f
/* Inferior thread state.
These are details related to the inferior itself, and don't include
observer_attach_thread_ptid_changed (infrun_thread_ptid_changed);
observer_attach_thread_stop_requested (infrun_thread_stop_requested);
+
+ /* Explicitly create without lookup, since that tries to create a
+ value with a void typed value, and when we get here, gdbarch
+ isn't initialized yet. At this point, we're quite sure there
+ isn't another convenience variable of the same name. */
+ create_internalvar_type_lazy ("_siginfo", siginfo_make_value);
}
}
static LONGEST
+linux_xfer_siginfo (struct target_ops *ops, enum target_object object,
+ const char *annex, gdb_byte *readbuf,
+ const gdb_byte *writebuf, ULONGEST offset, LONGEST len)
+{
+ struct lwp_info *lp;
+ LONGEST n;
+ int pid;
+ struct siginfo siginfo;
+
+ gdb_assert (object == TARGET_OBJECT_SIGNAL_INFO);
+ gdb_assert (readbuf || writebuf);
+
+ pid = GET_LWP (inferior_ptid);
+ if (pid == 0)
+ pid = GET_PID (inferior_ptid);
+
+ if (offset > sizeof (siginfo))
+ return -1;
+
+ errno = 0;
+ ptrace (PTRACE_GETSIGINFO, pid, (PTRACE_TYPE_ARG3) 0, &siginfo);
+ if (errno != 0)
+ return -1;
+
+ if (offset + len > sizeof (siginfo))
+ len = sizeof (siginfo) - offset;
+
+ if (readbuf != NULL)
+ memcpy (readbuf, (char *)&siginfo + offset, len);
+ else
+ {
+ memcpy ((char *)&siginfo + offset, writebuf, len);
+ errno = 0;
+ ptrace (PTRACE_SETSIGINFO, pid, (PTRACE_TYPE_ARG3) 0, &siginfo);
+ if (errno != 0)
+ return -1;
+ }
+
+ return len;
+}
+
+static LONGEST
linux_nat_xfer_partial (struct target_ops *ops, enum target_object object,
const char *annex, gdb_byte *readbuf,
const gdb_byte *writebuf,
ULONGEST offset, LONGEST len)
{
- struct cleanup *old_chain = save_inferior_ptid ();
+ struct cleanup *old_chain;
LONGEST xfer;
+ if (object == TARGET_OBJECT_SIGNAL_INFO)
+ return linux_xfer_siginfo (ops, object, annex, readbuf, writebuf,
+ offset, len);
+
+ old_chain = save_inferior_ptid ();
+
if (is_lwp (inferior_ptid))
inferior_ptid = pid_to_ptid (GET_LWP (inferior_ptid));
--- /dev/null
+/* Target-dependent code for GNU/Linux, architecture independent.
+
+ Copyright (C) 2009 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+#include "defs.h"
+#include "gdbtypes.h"
+
+/* This function is suitable for architectures that don't
+ extend/override the standard siginfo structure. */
+
+struct type *
+linux_get_siginfo_type (struct gdbarch *gdbarch)
+{
+ struct type *int_type, *uint_type, *long_type, *void_ptr_type;
+ struct type *uid_type, *pid_type;
+ struct type *sigval_type, *clock_type;
+ struct type *siginfo_type, *sifields_type;
+ struct type *type;
+
+ int_type = init_type (TYPE_CODE_INT,
+ gdbarch_int_bit (gdbarch) / HOST_CHAR_BIT,
+ 0, "int", NULL);
+ uint_type = init_type (TYPE_CODE_INT,
+ gdbarch_int_bit (gdbarch) / HOST_CHAR_BIT,
+ 0, "unsigned int", NULL);
+ long_type = init_type (TYPE_CODE_INT,
+ gdbarch_long_bit (gdbarch) / HOST_CHAR_BIT,
+ 0, "long", NULL);
+ void_ptr_type = lookup_pointer_type (builtin_type (gdbarch)->builtin_void);
+
+ /* sival_t */
+ sigval_type = init_composite_type (NULL, TYPE_CODE_UNION);
+ TYPE_NAME (sigval_type) = xstrdup ("sigval_t");
+ append_composite_type_field (sigval_type, "sival_int", int_type);
+ append_composite_type_field (sigval_type, "sival_ptr", void_ptr_type);
+
+ /* __pid_t */
+ pid_type = init_type (TYPE_CODE_TYPEDEF, TYPE_LENGTH (int_type),
+ TYPE_FLAG_TARGET_STUB, NULL, NULL);
+ TYPE_NAME (pid_type) = xstrdup ("__pid_t");
+ TYPE_TARGET_TYPE (pid_type) = int_type;
+
+ /* __uid_t */
+ uid_type = init_type (TYPE_CODE_TYPEDEF, TYPE_LENGTH (uint_type),
+ TYPE_FLAG_TARGET_STUB, NULL, NULL);
+ TYPE_NAME (uid_type) = xstrdup ("__uid_t");
+ TYPE_TARGET_TYPE (uid_type) = uint_type;
+
+ /* __clock_t */
+ clock_type = init_type (TYPE_CODE_TYPEDEF, TYPE_LENGTH (long_type),
+ TYPE_FLAG_TARGET_STUB, NULL, NULL);
+ TYPE_NAME (clock_type) = xstrdup ("__clock_t");
+ TYPE_TARGET_TYPE (clock_type) = long_type;
+
+ /* _sifields */
+ sifields_type = init_composite_type (NULL, TYPE_CODE_UNION);
+
+ {
+ const int si_max_size = 128;
+ int si_pad_size;
+ int size_of_int = gdbarch_int_bit (gdbarch) / HOST_CHAR_BIT;
+
+ /* _pad */
+ if (gdbarch_ptr_bit (gdbarch) == 64)
+ si_pad_size = (si_max_size / size_of_int) - 4;
+ else
+ si_pad_size = (si_max_size / size_of_int) - 3;
+ append_composite_type_field (sifields_type, "_pad",
+ init_vector_type (int_type, si_pad_size));
+ }
+
+ /* _kill */
+ type = init_composite_type (NULL, TYPE_CODE_STRUCT);
+ append_composite_type_field (type, "si_pid", pid_type);
+ append_composite_type_field (type, "si_uid", uid_type);
+ append_composite_type_field (sifields_type, "_kill", type);
+
+ /* _timer */
+ type = init_composite_type (NULL, TYPE_CODE_STRUCT);
+ append_composite_type_field (type, "si_tid", int_type);
+ append_composite_type_field (type, "si_overrun", int_type);
+ append_composite_type_field (type, "si_sigval", sigval_type);
+ append_composite_type_field (sifields_type, "_timer", type);
+
+ /* _rt */
+ type = init_composite_type (NULL, TYPE_CODE_STRUCT);
+ append_composite_type_field (type, "si_pid", pid_type);
+ append_composite_type_field (type, "si_uid", uid_type);
+ append_composite_type_field (type, "si_sigval", sigval_type);
+ append_composite_type_field (sifields_type, "_rt", type);
+
+ /* _sigchld */
+ type = init_composite_type (NULL, TYPE_CODE_STRUCT);
+ append_composite_type_field (type, "si_pid", pid_type);
+ append_composite_type_field (type, "si_uid", uid_type);
+ append_composite_type_field (type, "si_status", int_type);
+ append_composite_type_field (type, "si_utime", clock_type);
+ append_composite_type_field (type, "si_stime", clock_type);
+ append_composite_type_field (sifields_type, "_sigchld", type);
+
+ /* _sigfault */
+ type = init_composite_type (NULL, TYPE_CODE_STRUCT);
+ append_composite_type_field (type, "si_addr", void_ptr_type);
+ append_composite_type_field (sifields_type, "_sigfault", type);
+
+ /* _sigpoll */
+ type = init_composite_type (NULL, TYPE_CODE_STRUCT);
+ append_composite_type_field (type, "si_band", long_type);
+ append_composite_type_field (type, "si_fd", int_type);
+ append_composite_type_field (sifields_type, "_sigpoll", type);
+
+ /* struct siginfo */
+ siginfo_type = init_composite_type (NULL, TYPE_CODE_STRUCT);
+ TYPE_NAME (siginfo_type) = xstrdup ("siginfo");
+ append_composite_type_field (siginfo_type, "si_signo", int_type);
+ append_composite_type_field (siginfo_type, "si_errno", int_type);
+ append_composite_type_field (siginfo_type, "si_code", int_type);
+ append_composite_type_field_aligned (siginfo_type,
+ "_sifields", sifields_type,
+ TYPE_LENGTH (long_type));
+
+ return siginfo_type;
+}
--- /dev/null
+/* Target-dependent code for GNU/Linux, architecture independent.
+
+ Copyright (C) 2009 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+#ifndef LINUX_TDEP_H
+#define LINUX_TDEP_H
+
+struct type *linux_get_siginfo_type (struct gdbarch *);
+
+#endif /* linux-tdep.h */
PACKET_vRun,
PACKET_QStartNoAckMode,
PACKET_vKill,
+ PACKET_qXfer_siginfo_read,
+ PACKET_qXfer_siginfo_write,
PACKET_MAX
};
PACKET_QStartNoAckMode },
{ "multiprocess", PACKET_DISABLE, remote_multi_process_feature, -1 },
{ "QNonStop", PACKET_DISABLE, remote_non_stop_feature, -1 },
+ { "qXfer:siginfo:read", PACKET_DISABLE, remote_supported_packet,
+ PACKET_qXfer_siginfo_read },
+ { "qXfer:siginfo:write", PACKET_DISABLE, remote_supported_packet,
+ PACKET_qXfer_siginfo_write },
};
static void
[PACKET_qXfer_spu_write]);
}
+ /* Handle extra signal info using qxfer packets. */
+ if (object == TARGET_OBJECT_SIGNAL_INFO)
+ {
+ if (readbuf)
+ return remote_read_qxfer (ops, "siginfo", annex, readbuf, offset, len,
+ &remote_protocol_packets
+ [PACKET_qXfer_siginfo_read]);
+ else
+ return remote_write_qxfer (ops, "siginfo", annex, writebuf, offset, len,
+ &remote_protocol_packets
+ [PACKET_qXfer_siginfo_write]);
+ }
+
/* Only handle flash writes. */
if (writebuf != NULL)
{
add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_osdata],
"qXfer:osdata:read", "osdata", 0);
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_siginfo_read],
+ "qXfer:siginfo:read", "read-siginfo-object", 0);
+
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_siginfo_write],
+ "qXfer:siginfo:write", "write-siginfo-object", 0);
+
add_packet_config_cmd (&remote_protocol_packets[PACKET_qGetTLSAddr],
"qGetTLSAddr", "get-thread-local-storage-address",
0);
TARGET_OBJECT_LIBRARIES,
/* Get OS specific data. The ANNEX specifies the type (running
processes, etc.). */
- TARGET_OBJECT_OSDATA
+ TARGET_OBJECT_OSDATA,
+ /* Extra signal info. Usually the contents of `siginfo_t' on unix
+ platforms. */
+ TARGET_OBJECT_SIGNAL_INFO,
/* Possible future objects: TARGET_OBJECT_FILE, ... */
};
+2009-02-06 Pedro Alves <pedro@codesourcery.com>
+
+ * gdb.base/siginfo-obj.c, gdb.base/siginfo-obj.exp: New.
+
2009-02-06 Thiago Jung Bauermann <bauerman@br.ibm.com>
* gdb.python/python-cmd.exp: New file.
--- /dev/null
+/* This testcase is part of GDB, the GNU debugger.
+
+ Copyright 2004, 2007, 2008 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+*/
+
+#include <signal.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/mman.h>
+#include <unistd.h>
+
+static void *p;
+
+static void
+handler (int sig, siginfo_t *info, void *context)
+{
+ /* Copy to local vars, as the test wants to read them, and si_addr,
+ etc. may be preprocessor defines. */
+ int ssi_errno = info->si_errno;
+ int ssi_signo = info->si_signo;
+ int ssi_code = info->si_code;
+ void *ssi_addr = info->si_addr;
+
+ _exit (0); /* set breakpoint here */
+}
+
+int
+main (void)
+{
+ /* Set up unwritable memory. */
+ {
+ size_t len;
+ len = sysconf(_SC_PAGESIZE);
+ p = mmap (0, len, PROT_NONE, MAP_ANON|MAP_PRIVATE, -1, 0);
+ if (p == MAP_FAILED)
+ {
+ perror ("mmap");
+ return 1;
+ }
+ }
+ /* Set up the signal handler. */
+ {
+ struct sigaction action;
+ memset (&action, 0, sizeof (action));
+ action.sa_sigaction = handler;
+ action.sa_flags |= SA_SIGINFO;
+ if (sigaction (SIGSEGV, &action, NULL))
+ {
+ perror ("sigaction");
+ return 1;
+ }
+ }
+ /* Trigger SIGSEGV. */
+ *(int *)p = 0;
+ return 0;
+}
--- /dev/null
+# Copyright 2004, 2007, 2008 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+
+# The program siginfo-obj.c arranges for a signal handler registered
+# using sigaction's sa_sigaction / SA_SIGINFO to be called with
+# si_addr filled in.
+
+# This test confirms that we can inspect signal info using the
+# $_siginfo convenience variable.
+
+if [target_info exists gdb,nosignals] {
+ verbose "Skipping siginfo-obj.exp because of nosignals."
+ continue
+}
+
+if { ! [istarget "i?86-*-linux*"]
+ && ! [istarget "x86_64-*-linux*"]
+ && ! [istarget "arm*-*-linux*"] } {
+ verbose "Skipping siginfo-obj.exp because of lack of support."
+ return
+}
+
+if $tracelevel then {
+ strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+set testfile siginfo-obj
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+ untested "Couldn't compile ${srcfile}.c"
+ return -1
+}
+
+# get things started
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+# Advance to main
+if { ![runto_main] } then {
+ gdb_suppress_tests;
+}
+
+# Run to the signal.
+gdb_test "continue" ".*Program received signal SIGSEGV.*" "continue to signal"
+
+set ssi_addr ""
+set test "Extract si_addr"
+gdb_test_multiple "p \$_siginfo" "$test" {
+ -re "si_addr = ($hex).*$gdb_prompt $" {
+ set ssi_addr $expect_out(1,string)
+ pass "$test"
+ }
+}
+
+set test "Extract si_errno"
+gdb_test_multiple "p \$_siginfo" "$test" {
+ -re "si_errno = (\[0-9\]\+).*$gdb_prompt $" {
+ set ssi_errno $expect_out(1,string)
+ pass "$test"
+ }
+}
+
+set test "Extract si_code"
+gdb_test_multiple "p \$_siginfo" "$test" {
+ -re "si_code = (\[0-9\]\+).*$gdb_prompt $" {
+ set ssi_code $expect_out(1,string)
+ pass "$test"
+ }
+}
+
+set test "Extract si_signo"
+gdb_test_multiple "p \$_siginfo" "$test" {
+ -re "si_signo = (\[0-9\]\+).*$gdb_prompt $" {
+ set ssi_signo $expect_out(1,string)
+ pass "$test"
+ }
+}
+
+set bp_location [gdb_get_line_number "set breakpoint here"]
+
+gdb_test "break $bp_location"
+gdb_test "continue" ".* handler .*" "continue to handler"
+
+gdb_test "p ssi_addr" " = \\(void \\*\\) $ssi_addr"
+gdb_test "p ssi_errno" " = $ssi_errno"
+gdb_test "p ssi_code" " = $ssi_code"
+gdb_test "p ssi_signo" " = $ssi_signo"
+
+# Again, but this time, patch si_addr and check that the inferior sees
+# the changed value.
+
+# Advance to main
+if { ![runto_main] } then {
+ gdb_suppress_tests;
+}
+
+# Run to the signal.
+gdb_test "continue" ".*Program received signal SIGSEGV.*" "continue to signal"
+
+set test "Set si_addr"
+gdb_test "p \$_siginfo._sifields._sigfault.si_addr = 0x666" " = \\(void \\*\\) 0x666"
+gdb_test "p \$_siginfo.si_errno = 666" " = 666"
+gdb_test "p \$_siginfo.si_code = 999" " = 999"
+gdb_test "p \$_siginfo.si_signo = 11" " = 11"
+
+gdb_test "break $bp_location"
+gdb_test "continue" ".* handler .*" "continue to handler"
+
+gdb_test "p ssi_addr" " = \\(void \\*\\) 0x666"
+gdb_test "p ssi_errno" " = 666"
+gdb_test "p ssi_code" " = 999"
+gdb_test "p ssi_signo" " = 11"
var->name = concat (name, (char *)NULL);
var->value = allocate_value (builtin_type_void);
var->endian = gdbarch_byte_order (current_gdbarch);
+ var->make_value = NULL;
release_value (var->value);
var->next = internalvars;
internalvars = var;
return var;
}
+/* Create an internal variable with name NAME and register FUN as the
+ function that value_of_internalvar uses to create a value whenever
+ this variable is referenced. NAME should not normally include a
+ dollar sign. */
+
+struct internalvar *
+create_internalvar_type_lazy (char *name, internalvar_make_value fun)
+{
+ struct internalvar *var;
+ var = (struct internalvar *) xmalloc (sizeof (struct internalvar));
+ var->name = concat (name, (char *)NULL);
+ var->value = NULL;
+ var->make_value = fun;
+ var->endian = gdbarch_byte_order (current_gdbarch);
+ var->next = internalvars;
+ internalvars = var;
+ return var;
+}
/* Look up an internal variable with name NAME. NAME should not
normally include a dollar sign.
int i, j;
gdb_byte temp;
- val = value_copy (var->value);
- if (value_lazy (val))
- value_fetch_lazy (val);
-
- /* If the variable's value is a computed lvalue, we want references
- to it to produce another computed lvalue, where referencces and
- assignments actually operate through the computed value's
- functions.
-
- This means that internal variables with computed values behave a
- little differently from other internal variables: assignments to
- them don't just replace the previous value altogether. At the
- moment, this seems like the behavior we want. */
- if (var->value->lval == lval_computed)
- VALUE_LVAL (val) = lval_computed;
+ if (var->make_value != NULL)
+ val = (*var->make_value) (var);
else
{
- VALUE_LVAL (val) = lval_internalvar;
- VALUE_INTERNALVAR (val) = var;
+ val = value_copy (var->value);
+ if (value_lazy (val))
+ value_fetch_lazy (val);
+
+ /* If the variable's value is a computed lvalue, we want
+ references to it to produce another computed lvalue, where
+ referencces and assignments actually operate through the
+ computed value's functions.
+
+ This means that internal variables with computed values
+ behave a little differently from other internal variables:
+ assignments to them don't just replace the previous value
+ altogether. At the moment, this seems like the behavior we
+ want. */
+ if (var->value->lval == lval_computed)
+ VALUE_LVAL (val) = lval_computed;
+ else
+ {
+ VALUE_LVAL (val) = lval_internalvar;
+ VALUE_INTERNALVAR (val) = var;
+ }
}
/* Values are always stored in the target's byte order. When connected to a
preserve_one_value (cur->values[i], objfile, copied_types);
for (var = internalvars; var; var = var->next)
- preserve_one_value (var->value, objfile, copied_types);
+ if (var->value)
+ preserve_one_value (var->value, objfile, copied_types);
for (val = values_in_python; val; val = val->next)
preserve_one_value (val, objfile, copied_types);
/* Internal variables (variables for convenience of use of debugger)
are recorded as a chain of these structures. */
+typedef struct value * (*internalvar_make_value) (struct internalvar *);
+
struct internalvar
{
struct internalvar *next;
char *name;
struct value *value;
+ internalvar_make_value make_value;
int endian;
};
extern struct internalvar *create_internalvar (char *name);
+extern struct internalvar *
+ create_internalvar_type_lazy (char *name, internalvar_make_value fun);
+
extern struct internalvar *lookup_internalvar (char *name);
extern int value_equal (struct value *arg1, struct value *arg2);
projects / platform / upstream / binutils.git / commitdiff