[ARM] pxa/em-x270: prepare addition of eXeda machine to em-x270.c

Change several GPIO assignment from static to run-time
  Split MFP table to common and EM-X270 specific parts
  Introduce em_x270_module_init

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>

diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 20ed10c..ea09918 100644 (file)
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -60,7 +60,11 @@
 #define GPIO93_CAM_RESET       (93)
 #define GPIO95_MMC_WP          (95)
 
-static unsigned long em_x270_pin_config[] = {
+static int mmc_cd;
+static int nand_rb;
+static int dm9000_flags;
+
+static unsigned long common_pin_config[] = {
        /* AC'97 */
        GPIO28_AC97_BITCLK,
        GPIO29_AC97_SDATA_IN_0,
@@ -167,7 +171,6 @@ static unsigned long em_x270_pin_config[] = {
 
        /* GPIO */
        GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,       /* sleep/resume button */
-       GPIO95_GPIO,                            /* MMC Write protect */
 
        /* power controls */
        GPIO20_GPIO     | MFP_LPM_DRIVE_LOW,    /* GPRS_PWEN */
@@ -176,13 +179,17 @@ static unsigned long em_x270_pin_config[] = {
 
        /* NAND controls */
        GPIO11_GPIO     | MFP_LPM_DRIVE_HIGH,   /* NAND CE# */
-       GPIO56_GPIO,                            /* NAND Ready/Busy */
 
        /* interrupts */
-       GPIO13_GPIO,    /* MMC card detect */
        GPIO41_GPIO,    /* DM9000 interrupt */
 };
 
+static unsigned long em_x270_pin_config[] = {
+       GPIO13_GPIO,    /* MMC card detect */
+       GPIO56_GPIO,    /* NAND Ready/Busy */
+       GPIO95_GPIO,    /* MMC Write protect */
+};
+
 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
 static struct resource em_x270_dm9000_resource[] = {
        [0] = {
@@ -203,7 +210,7 @@ static struct resource em_x270_dm9000_resource[] = {
 };
 
 static struct dm9000_plat_data em_x270_dm9000_platdata = {
-       .flags          = DM9000_PLATF_32BITONLY,
+       .flags          = DM9000_PLATF_NO_EEPROM,
 };
 
 static struct platform_device em_x270_dm9000 = {
@@ -218,6 +225,7 @@ static struct platform_device em_x270_dm9000 = {
 
 static void __init em_x270_init_dm9000(void)
 {
+       em_x270_dm9000_platdata.flags |= dm9000_flags;
        platform_device_register(&em_x270_dm9000);
 }
 #else
@@ -307,7 +315,7 @@ static int em_x270_nand_device_ready(struct mtd_info *mtd)
 {
        dsb();
 
-       return gpio_get_value(GPIO56_NAND_RB);
+       return gpio_get_value(nand_rb);
 }
 
 static struct mtd_partition em_x270_partition_info[] = {
@@ -372,14 +380,14 @@ static void __init em_x270_init_nand(void)
 
        gpio_direction_output(GPIO11_NAND_CS, 1);
 
-       err = gpio_request(GPIO56_NAND_RB, "NAND R/B");
+       err = gpio_request(nand_rb, "NAND R/B");
        if (err) {
                pr_warning("EM-X270: failed to request NAND R/B gpio\n");
                gpio_free(GPIO11_NAND_CS);
                return;
        }
 
-       gpio_direction_input(GPIO56_NAND_RB);
+       gpio_direction_input(nand_rb);
 
        platform_device_register(&em_x270_nand);
 }
@@ -483,7 +491,7 @@ static int em_x270_mci_init(struct device *dev,
                return PTR_ERR(em_x270_sdio_ldo);
        }
 
-       err = request_irq(gpio_to_irq(GPIO13_MMC_CD), em_x270_detect_int,
+       err = request_irq(gpio_to_irq(mmc_cd), em_x270_detect_int,
                              IRQF_DISABLED | IRQF_TRIGGER_RISING |
                              IRQF_TRIGGER_FALLING,
                              "MMC card detect", data);
@@ -503,7 +511,7 @@ static int em_x270_mci_init(struct device *dev,
        return 0;
 
 err_gpio_wp:
-       free_irq(gpio_to_irq(GPIO13_MMC_CD), data);
+       free_irq(gpio_to_irq(mmc_cd), data);
 err_irq:
        regulator_put(em_x270_sdio_ldo);
 
@@ -526,7 +534,7 @@ static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
 
 static void em_x270_mci_exit(struct device *dev, void *data)
 {
-       free_irq(gpio_to_irq(GPIO13_MMC_CD), data);
+       free_irq(gpio_to_irq(mmc_cd), data);
 }
 
 static int em_x270_mci_get_ro(struct device *dev)
@@ -911,10 +919,21 @@ static void __init em_x270_init_da9030(void)
        i2c_register_board_info(1, &em_x270_i2c_pmic_info, 1);
 }
 
-static void __init em_x270_init(void)
+static void __init em_x270_module_init(void)
 {
        pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config));
 
+       mmc_cd = GPIO13_MMC_CD;
+       nand_rb = GPIO56_NAND_RB;
+       dm9000_flags = DM9000_PLATF_32BITONLY;
+}
+
+static void __init em_x270_init(void)
+{
+       pxa2xx_mfp_config(ARRAY_AND_SIZE(common_pin_config));
+
+       em_x270_module_init();
+
        em_x270_init_da9030();
        em_x270_init_dm9000();
        em_x270_init_rtc();