When counting down the counter start from preset value
and fire event when reach 0.
-What: /sys/bus/iio/devices/iio:deviceX/in_count_quadrature_mode_available
-KernelVersion: 4.12
-Contact: benjamin.gaignard@st.com
-Description:
- Reading returns the list possible quadrature modes.
-
-What: /sys/bus/iio/devices/iio:deviceX/in_count0_quadrature_mode
-KernelVersion: 4.12
-Contact: benjamin.gaignard@st.com
-Description:
- Configure the device counter quadrature modes:
-
- channel_A:
- Encoder A input servers as the count input and B as
- the UP/DOWN direction control input.
-
- channel_B:
- Encoder B input serves as the count input and A as
- the UP/DOWN direction control input.
-
- quadrature:
- Encoder A and B inputs are mixed to get direction
- and count with a scale of 0.25.
-
What: /sys/bus/iio/devices/iio:deviceX/in_count_enable_mode_available
KernelVersion: 4.12
Contact: benjamin.gaignard@st.com
if (!tty->ops->write)
return -EOPNOTSUPP;
+
+ mutex_lock(&speakup_tty_mutex);
+ if (speakup_tty) {
+ mutex_unlock(&speakup_tty_mutex);
+ return -EBUSY;
+ }
speakup_tty = tty;
ldisc_data = kmalloc(sizeof(*ldisc_data), GFP_KERNEL);
- if (!ldisc_data)
+ if (!ldisc_data) {
+ speakup_tty = NULL;
+ mutex_unlock(&speakup_tty_mutex);
return -ENOMEM;
+ }
init_completion(&ldisc_data->completion);
ldisc_data->buf_free = true;
speakup_tty->disc_data = ldisc_data;
+ mutex_unlock(&speakup_tty_mutex);
return 0;
}
.reg_bits = 32,
.val_bits = 32,
.reg_stride = 4,
- .max_register = 0x24,
+ .max_register = QUPRD,
};
static const struct regmap_config ti_eqep_regmap16_config = {
.reg_bits = 16,
.val_bits = 16,
.reg_stride = 2,
- .max_register = 0x1e,
+ .max_register = QCPRDLAT,
};
static int ti_eqep_probe(struct platform_device *pdev)
KX_MAX_CHIPS /* this must be last */
};
+enum kx_acpi_type {
+ ACPI_GENERIC,
+ ACPI_SMO8500,
+ ACPI_KIOX010A,
+};
+
struct kxcjk1013_data {
struct i2c_client *client;
struct iio_trigger *dready_trig;
bool motion_trigger_on;
int64_t timestamp;
enum kx_chipset chipset;
- bool is_smo8500_device;
+ enum kx_acpi_type acpi_type;
};
enum kxcjk1013_axis {
{19163, 1, 0},
{38326, 0, 1} };
+#ifdef CONFIG_ACPI
+enum kiox010a_fn_index {
+ KIOX010A_SET_LAPTOP_MODE = 1,
+ KIOX010A_SET_TABLET_MODE = 2,
+};
+
+static int kiox010a_dsm(struct device *dev, int fn_index)
+{
+ acpi_handle handle = ACPI_HANDLE(dev);
+ guid_t kiox010a_dsm_guid;
+ union acpi_object *obj;
+
+ if (!handle)
+ return -ENODEV;
+
+ guid_parse("1f339696-d475-4e26-8cad-2e9f8e6d7a91", &kiox010a_dsm_guid);
+
+ obj = acpi_evaluate_dsm(handle, &kiox010a_dsm_guid, 1, fn_index, NULL);
+ if (!obj)
+ return -EIO;
+
+ ACPI_FREE(obj);
+ return 0;
+}
+#endif
+
static int kxcjk1013_set_mode(struct kxcjk1013_data *data,
enum kxcjk1013_mode mode)
{
{
int ret;
+#ifdef CONFIG_ACPI
+ if (data->acpi_type == ACPI_KIOX010A) {
+ /* Make sure the kbd and touchpad on 2-in-1s using 2 KXCJ91008-s work */
+ kiox010a_dsm(&data->client->dev, KIOX010A_SET_LAPTOP_MODE);
+ }
+#endif
+
ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_WHO_AM_I);
if (ret < 0) {
dev_err(&data->client->dev, "Error reading who_am_i\n");
static const char *kxcjk1013_match_acpi_device(struct device *dev,
enum kx_chipset *chipset,
- bool *is_smo8500_device)
+ enum kx_acpi_type *acpi_type)
{
const struct acpi_device_id *id;
return NULL;
if (strcmp(id->id, "SMO8500") == 0)
- *is_smo8500_device = true;
+ *acpi_type = ACPI_SMO8500;
+ else if (strcmp(id->id, "KIOX010A") == 0)
+ *acpi_type = ACPI_KIOX010A;
*chipset = (enum kx_chipset)id->driver_data;
} else if (ACPI_HANDLE(&client->dev)) {
name = kxcjk1013_match_acpi_device(&client->dev,
&data->chipset,
- &data->is_smo8500_device);
+ &data->acpi_type);
} else
return -ENODEV;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &kxcjk1013_info;
- if (client->irq > 0 && !data->is_smo8500_device) {
+ if (client->irq > 0 && data->acpi_type != ACPI_SMO8500) {
ret = devm_request_threaded_irq(&client->dev, client->irq,
kxcjk1013_data_rdy_trig_poll,
kxcjk1013_event_handler,
#define JZ4725B_ADC_BATTERY_HIGH_VREF_BITS 10
#define JZ4740_ADC_BATTERY_HIGH_VREF (7500 * 0.986)
#define JZ4740_ADC_BATTERY_HIGH_VREF_BITS 12
-#define JZ4770_ADC_BATTERY_VREF 6600
+#define JZ4770_ADC_BATTERY_VREF 1200
#define JZ4770_ADC_BATTERY_VREF_BITS 12
#define JZ_ADC_IRQ_AUX BIT(0)
mutex_unlock(&adc->lock);
}
-static void ingenic_adc_enable(struct ingenic_adc *adc,
- int engine,
- bool enabled)
+static void ingenic_adc_enable_unlocked(struct ingenic_adc *adc,
+ int engine,
+ bool enabled)
{
u8 val;
- mutex_lock(&adc->lock);
val = readb(adc->base + JZ_ADC_REG_ENABLE);
if (enabled)
val &= ~BIT(engine);
writeb(val, adc->base + JZ_ADC_REG_ENABLE);
+}
+
+static void ingenic_adc_enable(struct ingenic_adc *adc,
+ int engine,
+ bool enabled)
+{
+ mutex_lock(&adc->lock);
+ ingenic_adc_enable_unlocked(adc, engine, enabled);
mutex_unlock(&adc->lock);
}
static int ingenic_adc_capture(struct ingenic_adc *adc,
int engine)
{
+ u32 cfg;
u8 val;
int ret;
- ingenic_adc_enable(adc, engine, true);
+ /*
+ * Disable CMD_SEL temporarily, because it causes wrong VBAT readings,
+ * probably due to the switch of VREF. We must keep the lock here to
+ * avoid races with the buffer enable/disable functions.
+ */
+ mutex_lock(&adc->lock);
+ cfg = readl(adc->base + JZ_ADC_REG_CFG);
+ writel(cfg & ~JZ_ADC_REG_CFG_CMD_SEL, adc->base + JZ_ADC_REG_CFG);
+
+ ingenic_adc_enable_unlocked(adc, engine, true);
ret = readb_poll_timeout(adc->base + JZ_ADC_REG_ENABLE, val,
!(val & BIT(engine)), 250, 1000);
if (ret)
- ingenic_adc_enable(adc, engine, false);
+ ingenic_adc_enable_unlocked(adc, engine, false);
+
+ writel(cfg, adc->base + JZ_ADC_REG_CFG);
+ mutex_unlock(&adc->lock);
return ret;
}
#include <linux/err.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
+#include <linux/property.h>
#include <linux/iopoll.h>
#include <linux/io.h>
#include <linux/iio/iio.h>
goto err_disable_clk;
}
+ adc_dev->dev_comp = device_get_match_data(&pdev->dev);
+
mutex_init(&adc_dev->lock);
mt6577_auxadc_mod_reg(adc_dev->reg_base + MT6577_AUXADC_MISC,
* struct stm32_adc_common_regs - stm32 common registers
* @csr: common status register offset
* @ccr: common control register offset
- * @eoc1_msk: adc1 end of conversion flag in @csr
- * @eoc2_msk: adc2 end of conversion flag in @csr
- * @eoc3_msk: adc3 end of conversion flag in @csr
+ * @eoc_msk: array of eoc (end of conversion flag) masks in csr for adc1..n
+ * @ovr_msk: array of ovr (overrun flag) masks in csr for adc1..n
* @ier: interrupt enable register offset for each adc
* @eocie_msk: end of conversion interrupt enable mask in @ier
*/
struct stm32_adc_common_regs {
u32 csr;
u32 ccr;
- u32 eoc1_msk;
- u32 eoc2_msk;
- u32 eoc3_msk;
+ u32 eoc_msk[STM32_ADC_MAX_ADCS];
+ u32 ovr_msk[STM32_ADC_MAX_ADCS];
u32 ier;
u32 eocie_msk;
};
static const struct stm32_adc_common_regs stm32f4_adc_common_regs = {
.csr = STM32F4_ADC_CSR,
.ccr = STM32F4_ADC_CCR,
- .eoc1_msk = STM32F4_EOC1 | STM32F4_OVR1,
- .eoc2_msk = STM32F4_EOC2 | STM32F4_OVR2,
- .eoc3_msk = STM32F4_EOC3 | STM32F4_OVR3,
+ .eoc_msk = { STM32F4_EOC1, STM32F4_EOC2, STM32F4_EOC3},
+ .ovr_msk = { STM32F4_OVR1, STM32F4_OVR2, STM32F4_OVR3},
.ier = STM32F4_ADC_CR1,
- .eocie_msk = STM32F4_EOCIE | STM32F4_OVRIE,
+ .eocie_msk = STM32F4_EOCIE,
};
/* STM32H7 common registers definitions */
static const struct stm32_adc_common_regs stm32h7_adc_common_regs = {
.csr = STM32H7_ADC_CSR,
.ccr = STM32H7_ADC_CCR,
- .eoc1_msk = STM32H7_EOC_MST | STM32H7_OVR_MST,
- .eoc2_msk = STM32H7_EOC_SLV | STM32H7_OVR_SLV,
+ .eoc_msk = { STM32H7_EOC_MST, STM32H7_EOC_SLV},
+ .ovr_msk = { STM32H7_OVR_MST, STM32H7_OVR_SLV},
.ier = STM32H7_ADC_IER,
- .eocie_msk = STM32H7_EOCIE | STM32H7_OVRIE,
+ .eocie_msk = STM32H7_EOCIE,
};
static const unsigned int stm32_adc_offset[STM32_ADC_MAX_ADCS] = {
{
struct stm32_adc_priv *priv = irq_desc_get_handler_data(desc);
struct irq_chip *chip = irq_desc_get_chip(desc);
+ int i;
u32 status;
chained_irq_enter(chip, desc);
* before invoking the interrupt handler (e.g. call ISR only for
* IRQ-enabled ADCs).
*/
- if (status & priv->cfg->regs->eoc1_msk &&
- stm32_adc_eoc_enabled(priv, 0))
- generic_handle_irq(irq_find_mapping(priv->domain, 0));
-
- if (status & priv->cfg->regs->eoc2_msk &&
- stm32_adc_eoc_enabled(priv, 1))
- generic_handle_irq(irq_find_mapping(priv->domain, 1));
-
- if (status & priv->cfg->regs->eoc3_msk &&
- stm32_adc_eoc_enabled(priv, 2))
- generic_handle_irq(irq_find_mapping(priv->domain, 2));
+ for (i = 0; i < priv->cfg->num_irqs; i++) {
+ if ((status & priv->cfg->regs->eoc_msk[i] &&
+ stm32_adc_eoc_enabled(priv, i)) ||
+ (status & priv->cfg->regs->ovr_msk[i]))
+ generic_handle_irq(irq_find_mapping(priv->domain, i));
+ }
chained_irq_exit(chip, desc);
};
* @start_conv: routine to start conversions
* @stop_conv: routine to stop conversions
* @unprepare: optional unprepare routine (disable, power-down)
+ * @irq_clear: routine to clear irqs
* @smp_cycles: programmable sampling time (ADC clock cycles)
*/
struct stm32_adc_cfg {
void (*start_conv)(struct iio_dev *, bool dma);
void (*stop_conv)(struct iio_dev *);
void (*unprepare)(struct iio_dev *);
+ void (*irq_clear)(struct iio_dev *indio_dev, u32 msk);
const unsigned int *smp_cycles;
};
STM32F4_ADON | STM32F4_DMA | STM32F4_DDS);
}
+static void stm32f4_adc_irq_clear(struct iio_dev *indio_dev, u32 msk)
+{
+ struct stm32_adc *adc = iio_priv(indio_dev);
+
+ stm32_adc_clr_bits(adc, adc->cfg->regs->isr_eoc.reg, msk);
+}
+
static void stm32h7_adc_start_conv(struct iio_dev *indio_dev, bool dma)
{
struct stm32_adc *adc = iio_priv(indio_dev);
stm32_adc_clr_bits(adc, STM32H7_ADC_CFGR, STM32H7_DMNGT_MASK);
}
+static void stm32h7_adc_irq_clear(struct iio_dev *indio_dev, u32 msk)
+{
+ struct stm32_adc *adc = iio_priv(indio_dev);
+ /* On STM32H7 IRQs are cleared by writing 1 into ISR register */
+ stm32_adc_set_bits(adc, adc->cfg->regs->isr_eoc.reg, msk);
+}
+
static int stm32h7_adc_exit_pwr_down(struct iio_dev *indio_dev)
{
struct stm32_adc *adc = iio_priv(indio_dev);
}
}
+static void stm32_adc_irq_clear(struct iio_dev *indio_dev, u32 msk)
+{
+ struct stm32_adc *adc = iio_priv(indio_dev);
+
+ adc->cfg->irq_clear(indio_dev, msk);
+}
+
static irqreturn_t stm32_adc_threaded_isr(int irq, void *data)
{
struct iio_dev *indio_dev = data;
struct stm32_adc *adc = iio_priv(indio_dev);
const struct stm32_adc_regspec *regs = adc->cfg->regs;
u32 status = stm32_adc_readl(adc, regs->isr_eoc.reg);
+ u32 mask = stm32_adc_readl(adc, regs->ier_eoc.reg);
- if (status & regs->isr_ovr.mask)
+ /* Check ovr status right now, as ovr mask should be already disabled */
+ if (status & regs->isr_ovr.mask) {
+ /*
+ * Clear ovr bit to avoid subsequent calls to IRQ handler.
+ * This requires to stop ADC first. OVR bit state in ISR,
+ * is propaged to CSR register by hardware.
+ */
+ adc->cfg->stop_conv(indio_dev);
+ stm32_adc_irq_clear(indio_dev, regs->isr_ovr.mask);
dev_err(&indio_dev->dev, "Overrun, stopping: restart needed\n");
+ return IRQ_HANDLED;
+ }
- return IRQ_HANDLED;
+ if (!(status & mask))
+ dev_err_ratelimited(&indio_dev->dev,
+ "Unexpected IRQ: IER=0x%08x, ISR=0x%08x\n",
+ mask, status);
+
+ return IRQ_NONE;
}
static irqreturn_t stm32_adc_isr(int irq, void *data)
struct stm32_adc *adc = iio_priv(indio_dev);
const struct stm32_adc_regspec *regs = adc->cfg->regs;
u32 status = stm32_adc_readl(adc, regs->isr_eoc.reg);
+ u32 mask = stm32_adc_readl(adc, regs->ier_eoc.reg);
+
+ if (!(status & mask))
+ return IRQ_WAKE_THREAD;
if (status & regs->isr_ovr.mask) {
/*
.start_conv = stm32f4_adc_start_conv,
.stop_conv = stm32f4_adc_stop_conv,
.smp_cycles = stm32f4_adc_smp_cycles,
+ .irq_clear = stm32f4_adc_irq_clear,
};
static const struct stm32_adc_cfg stm32h7_adc_cfg = {
.prepare = stm32h7_adc_prepare,
.unprepare = stm32h7_adc_unprepare,
.smp_cycles = stm32h7_adc_smp_cycles,
+ .irq_clear = stm32h7_adc_irq_clear,
};
static const struct stm32_adc_cfg stm32mp1_adc_cfg = {
.prepare = stm32h7_adc_prepare,
.unprepare = stm32h7_adc_unprepare,
.smp_cycles = stm32h7_adc_smp_cycles,
+ .irq_clear = stm32h7_adc_irq_clear,
};
static const struct of_device_id stm32_adc_of_match[] = {
struct cros_ec_sensorhub *sensor_hub = dev_get_drvdata(dev->parent);
struct cros_ec_dev *ec = sensor_hub->ec;
struct cros_ec_sensor_platform *sensor_platform = dev_get_platdata(dev);
- u32 ver_mask;
+ u32 ver_mask, temp;
int frequencies[ARRAY_SIZE(state->frequencies) / 2] = { 0 };
int ret, i;
&frequencies[2],
&state->fifo_max_event_count);
} else {
- frequencies[1] = state->resp->info_3.min_frequency;
- frequencies[2] = state->resp->info_3.max_frequency;
- state->fifo_max_event_count =
- state->resp->info_3.fifo_max_event_count;
+ if (state->resp->info_3.max_frequency == 0) {
+ get_default_min_max_freq(state->resp->info.type,
+ &frequencies[1],
+ &frequencies[2],
+ &temp);
+ } else {
+ frequencies[1] = state->resp->info_3.min_frequency;
+ frequencies[2] = state->resp->info_3.max_frequency;
+ }
+ state->fifo_max_event_count = state->resp->info_3.fifo_max_event_count;
}
for (i = 0; i < ARRAY_SIZE(frequencies); i++) {
state->frequencies[2 * i] = frequencies[i] / 1000;
static void st_lsm6dsx_shub_wait_complete(struct st_lsm6dsx_hw *hw)
{
struct st_lsm6dsx_sensor *sensor;
- u32 odr;
+ u32 odr, timeout;
sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]);
odr = (hw->enable_mask & BIT(ST_LSM6DSX_ID_ACC)) ? sensor->odr : 12500;
- msleep((2000000U / odr) + 1);
+ /* set 10ms as minimum timeout for i2c slave configuration */
+ timeout = max_t(u32, 2000000U / odr + 1, 10);
+ msleep(timeout);
}
/*
config VCNL4035
tristate "VCNL4035 combined ALS and proximity sensor"
+ select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
select REGMAP_I2C
depends on I2C
return 0;
}
-static int mt7621_pcie_request_resources(struct mt7621_pcie *pcie,
- struct list_head *res)
+static void mt7621_pcie_add_resources(struct mt7621_pcie *pcie,
+ struct list_head *res)
{
- struct device *dev = pcie->dev;
-
pci_add_resource_offset(res, &pcie->io, pcie->offset.io);
pci_add_resource_offset(res, &pcie->mem, pcie->offset.mem);
- pci_add_resource(res, &pcie->busn);
-
- return devm_request_pci_bus_resources(dev, res);
}
static int mt7621_pcie_register_host(struct pci_host_bridge *host,
setup_cm_memory_region(pcie);
- err = mt7621_pcie_request_resources(pcie, &res);
- if (err) {
- dev_err(dev, "Error requesting resources\n");
- return err;
- }
+ mt7621_pcie_add_resources(pcie, &res);
err = mt7621_pcie_register_host(bridge, &res);
if (err) {
config DMA_RALINK
tristate "RALINK DMA support"
depends on RALINK && !SOC_RT288X
+ depends on DMADEVICES
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
{ SDIO_DEVICE(0x024c, 0x0525), },
{ SDIO_DEVICE(0x024c, 0x0623), },
{ SDIO_DEVICE(0x024c, 0x0626), },
+ { SDIO_DEVICE(0x024c, 0x0627), },
{ SDIO_DEVICE(0x024c, 0xb723), },
{ /* end: all zeroes */ },
};
goto err_disable_clk;
up->gpios = mctrl_gpio_init(port, 0);
- if (IS_ERR(up->gpios) && PTR_ERR(up->gpios) != -ENOSYS)
- return PTR_ERR(up->gpios);
+ if (IS_ERR(up->gpios) && PTR_ERR(up->gpios) != -ENOSYS) {
+ ret = PTR_ERR(up->gpios);
+ goto err_disable_clk;
+ }
up->rts_gpiod = mctrl_gpio_to_gpiod(up->gpios, UART_GPIO_RTS);
struct imx_port *sport = dev_id;
unsigned int usr1, usr2, ucr1, ucr2, ucr3, ucr4;
irqreturn_t ret = IRQ_NONE;
+ unsigned long flags = 0;
- spin_lock(&sport->port.lock);
+ /*
+ * IRQs might not be disabled upon entering this interrupt handler,
+ * e.g. when interrupt handlers are forced to be threaded. To support
+ * this scenario as well, disable IRQs when acquiring the spinlock.
+ */
+ spin_lock_irqsave(&sport->port.lock, flags);
usr1 = imx_uart_readl(sport, USR1);
usr2 = imx_uart_readl(sport, USR2);
ret = IRQ_HANDLED;
}
- spin_unlock(&sport->port.lock);
+ spin_unlock_irqrestore(&sport->port.lock, flags);
return ret;
}
unsigned int ucr1;
unsigned long flags = 0;
int locked = 1;
- int retval;
-
- retval = clk_enable(sport->clk_per);
- if (retval)
- return;
- retval = clk_enable(sport->clk_ipg);
- if (retval) {
- clk_disable(sport->clk_per);
- return;
- }
if (sport->port.sysrq)
locked = 0;
if (locked)
spin_unlock_irqrestore(&sport->port.lock, flags);
-
- clk_disable(sport->clk_ipg);
- clk_disable(sport->clk_per);
}
/*
retval = uart_set_options(&sport->port, co, baud, parity, bits, flow);
- clk_disable(sport->clk_ipg);
if (retval) {
- clk_unprepare(sport->clk_ipg);
+ clk_disable_unprepare(sport->clk_ipg);
goto error_console;
}
- retval = clk_prepare(sport->clk_per);
+ retval = clk_prepare_enable(sport->clk_per);
if (retval)
- clk_unprepare(sport->clk_ipg);
+ clk_disable_unprepare(sport->clk_ipg);
error_console:
return retval;
vp->cb_break_before = afs_calc_vnode_cb_break(vnode);
vp->vnode = vnode;
vp->put_vnode = true;
+ vp->speculative = true; /* vnode not locked */
}
}
}
op->flags &= ~AFS_OPERATION_DIR_CONFLICT;
}
} else if (vp->scb.have_status) {
+ if (vp->dv_before + vp->dv_delta != vp->scb.status.data_version &&
+ vp->speculative)
+ /* Ignore the result of a speculative bulk status fetch
+ * if it splits around a modification op, thereby
+ * appearing to regress the data version.
+ */
+ goto out;
afs_apply_status(op, vp);
if (vp->scb.have_cb)
afs_apply_callback(op, vp);
}
}
+out:
write_sequnlock(&vnode->cb_lock);
if (vp->scb.have_status)
bool update_ctime:1; /* Need to update the ctime */
bool set_size:1; /* Must update i_size */
bool op_unlinked:1; /* True if file was unlinked by op */
+ bool speculative:1; /* T if speculative status fetch (no vnode lock) */
};
/*
struct ext4_filename *fname);
static inline void ext4_update_dx_flag(struct inode *inode)
{
- if (!ext4_has_feature_dir_index(inode->i_sb)) {
+ if (!ext4_has_feature_dir_index(inode->i_sb) &&
+ ext4_test_inode_flag(inode, EXT4_INODE_INDEX)) {
/* ext4_iget() should have caught this... */
WARN_ON_ONCE(ext4_has_feature_metadata_csum(inode->i_sb));
ext4_clear_inode_flag(inode, EXT4_INODE_INDEX);
} else if (test_opt2(sb, DAX_INODE)) {
SEQ_OPTS_PUTS("dax=inode");
}
-
- if (test_opt2(sb, JOURNAL_FAST_COMMIT))
- SEQ_OPTS_PUTS("fast_commit");
-
ext4_show_quota_options(seq, sb);
return 0;
}
}
/**
- * Force and wait upon a commit if the calling process is not within
- * transaction. This is used for forcing out undo-protected data which contains
- * bitmaps, when the fs is running out of space.
+ * jbd2_journal_force_commit_nested - Force and wait upon a commit if the
+ * calling process is not within transaction.
*
* @journal: journal to force
* Returns true if progress was made.
+ *
+ * This is used for forcing out undo-protected data which contains
+ * bitmaps, when the fs is running out of space.
*/
int jbd2_journal_force_commit_nested(journal_t *journal)
{
}
/**
- * int journal_force_commit() - force any uncommitted transactions
+ * jbd2_journal_force_commit() - force any uncommitted transactions
* @journal: journal to force
*
* Caller want unconditional commit. We can only force the running transaction
/**
- * int jbd2_journal_load() - Read journal from disk.
+ * jbd2_journal_load() - Read journal from disk.
* @journal: Journal to act on.
*
* Given a journal_t structure which tells us which disk blocks contain
}
/**
- * void jbd2_journal_destroy() - Release a journal_t structure.
+ * jbd2_journal_destroy() - Release a journal_t structure.
* @journal: Journal to act on.
*
* Release a journal_t structure once it is no longer in use by the
/**
- *int jbd2_journal_check_used_features() - Check if features specified are used.
+ * jbd2_journal_check_used_features() - Check if features specified are used.
* @journal: Journal to check.
* @compat: bitmask of compatible features
* @ro: bitmask of features that force read-only mount
}
/**
- * int jbd2_journal_check_available_features() - Check feature set in journalling layer
+ * jbd2_journal_check_available_features() - Check feature set in journalling layer
* @journal: Journal to check.
* @compat: bitmask of compatible features
* @ro: bitmask of features that force read-only mount
}
/**
- * int jbd2_journal_set_features() - Mark a given journal feature in the superblock
+ * jbd2_journal_set_features() - Mark a given journal feature in the superblock
* @journal: Journal to act on.
* @compat: bitmask of compatible features
* @ro: bitmask of features that force read-only mount
}
/*
- * jbd2_journal_clear_features () - Clear a given journal feature in the
+ * jbd2_journal_clear_features() - Clear a given journal feature in the
* superblock
* @journal: Journal to act on.
* @compat: bitmask of compatible features
EXPORT_SYMBOL(jbd2_journal_clear_features);
/**
- * int jbd2_journal_flush () - Flush journal
+ * jbd2_journal_flush() - Flush journal
* @journal: Journal to act on.
*
* Flush all data for a given journal to disk and empty the journal.
}
/**
- * int jbd2_journal_wipe() - Wipe journal contents
+ * jbd2_journal_wipe() - Wipe journal contents
* @journal: Journal to act on.
* @write: flag (see below)
*
}
/**
- * void jbd2_journal_abort () - Shutdown the journal immediately.
+ * jbd2_journal_abort () - Shutdown the journal immediately.
* @journal: the journal to shutdown.
* @errno: an error number to record in the journal indicating
* the reason for the shutdown.
}
/**
- * int jbd2_journal_errno () - returns the journal's error state.
+ * jbd2_journal_errno() - returns the journal's error state.
* @journal: journal to examine.
*
* This is the errno number set with jbd2_journal_abort(), the last
}
/**
- * int jbd2_journal_clear_err () - clears the journal's error state
+ * jbd2_journal_clear_err() - clears the journal's error state
* @journal: journal to act on.
*
* An error must be cleared or acked to take a FS out of readonly
}
/**
- * void jbd2_journal_ack_err() - Ack journal err.
+ * jbd2_journal_ack_err() - Ack journal err.
* @journal: journal to act on.
*
* An error must be cleared or acked to take a FS out of readonly
/**
- * handle_t *jbd2_journal_start() - Obtain a new handle.
+ * jbd2_journal_start() - Obtain a new handle.
* @journal: Journal to start transaction on.
* @nblocks: number of block buffer we might modify
*
EXPORT_SYMBOL(jbd2_journal_free_reserved);
/**
- * int jbd2_journal_start_reserved() - start reserved handle
+ * jbd2_journal_start_reserved() - start reserved handle
* @handle: handle to start
* @type: for handle statistics
* @line_no: for handle statistics
EXPORT_SYMBOL(jbd2_journal_start_reserved);
/**
- * int jbd2_journal_extend() - extend buffer credits.
+ * jbd2_journal_extend() - extend buffer credits.
* @handle: handle to 'extend'
* @nblocks: nr blocks to try to extend by.
* @revoke_records: number of revoke records to try to extend by.
}
/**
- * int jbd2_journal_restart() - restart a handle .
+ * jbd2__journal_restart() - restart a handle .
* @handle: handle to restart
* @nblocks: nr credits requested
* @revoke_records: number of revoke record credits requested
EXPORT_SYMBOL(jbd2_journal_restart);
/**
- * void jbd2_journal_lock_updates () - establish a transaction barrier.
+ * jbd2_journal_lock_updates () - establish a transaction barrier.
* @journal: Journal to establish a barrier on.
*
* This locks out any further updates from being started, and blocks
}
/**
- * void jbd2_journal_unlock_updates (journal_t* journal) - release barrier
+ * jbd2_journal_unlock_updates () - release barrier
* @journal: Journal to release the barrier on.
*
* Release a transaction barrier obtained with jbd2_journal_lock_updates().
}
/**
- * int jbd2_journal_get_write_access() - notify intent to modify a buffer for metadata (not data) update.
+ * jbd2_journal_get_write_access() - notify intent to modify a buffer
+ * for metadata (not data) update.
* @handle: transaction to add buffer modifications to
* @bh: bh to be used for metadata writes
*
* unlocked buffer beforehand. */
/**
- * int jbd2_journal_get_create_access () - notify intent to use newly created bh
+ * jbd2_journal_get_create_access () - notify intent to use newly created bh
* @handle: transaction to new buffer to
* @bh: new buffer.
*
}
/**
- * int jbd2_journal_get_undo_access() - Notify intent to modify metadata with
+ * jbd2_journal_get_undo_access() - Notify intent to modify metadata with
* non-rewindable consequences
* @handle: transaction
* @bh: buffer to undo
}
/**
- * void jbd2_journal_set_triggers() - Add triggers for commit writeout
+ * jbd2_journal_set_triggers() - Add triggers for commit writeout
* @bh: buffer to trigger on
* @type: struct jbd2_buffer_trigger_type containing the trigger(s).
*
}
/**
- * int jbd2_journal_dirty_metadata() - mark a buffer as containing dirty metadata
+ * jbd2_journal_dirty_metadata() - mark a buffer as containing dirty metadata
* @handle: transaction to add buffer to.
* @bh: buffer to mark
*
}
/**
- * void jbd2_journal_forget() - bforget() for potentially-journaled buffers.
+ * jbd2_journal_forget() - bforget() for potentially-journaled buffers.
* @handle: transaction handle
* @bh: bh to 'forget'
*
}
/**
- * int jbd2_journal_stop() - complete a transaction
+ * jbd2_journal_stop() - complete a transaction
* @handle: transaction to complete.
*
* All done for a particular handle.
}
/**
- * int jbd2_journal_try_to_free_buffers() - try to free page buffers.
+ * jbd2_journal_try_to_free_buffers() - try to free page buffers.
* @journal: journal for operation
* @page: to try and free
*
}
/**
- * void jbd2_journal_invalidatepage()
+ * jbd2_journal_invalidatepage()
* @journal: journal to use for flush...
* @page: page to flush
* @offset: start of the range to invalidate
#define JI_WAIT_DATA (1 << __JI_WAIT_DATA)
/**
- * struct jbd_inode - The jbd_inode type is the structure linking inodes in
+ * struct jbd2_inode - The jbd_inode type is the structure linking inodes in
* ordered mode present in a transaction so that we can sync them during commit.
*/
struct jbd2_inode {
projects / platform / kernel / linux-rpi.git / commitdiff