mtd: rawnand: stm32_fmc2: use FMC2_TIMEOUT_5S for timeouts

FMC2_TIMEOUT_5S will be used each time that we need to wait.
It was seen, during stress tests in an overloaded system,
that we could be close to 1 second, even if we never met this
value. To be safe, FMC2_TIMEOUT_MS is set to 5 seconds.

Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>

diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
index f43e3ec..2e947a3 100644 (file)
--- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
+++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
@@ -131,6 +131,8 @@
 
 #define FMC2_NSEC_PER_SEC              1000000000L
 
+#define FMC2_TIMEOUT_5S                        5000000
+
 enum stm32_fmc2_ecc {
        FMC2_ECC_HAM = 1,
        FMC2_ECC_BCH4 = 4,
@@ -339,7 +341,7 @@ static int stm32_fmc2_ham_calculate(struct mtd_info *mtd, const u8 *data,
        int ret;
 
        ret = readl_poll_timeout(fmc2->io_base + FMC2_SR, sr,
-                                sr & FMC2_SR_NWRF, 10000);
+                                sr & FMC2_SR_NWRF, FMC2_TIMEOUT_5S);
        if (ret < 0) {
                pr_err("Ham timeout\n");
                return ret;
@@ -424,7 +426,7 @@ static int stm32_fmc2_bch_calculate(struct mtd_info *mtd, const u8 *data,
 
        /* Wait until the BCH code is ready */
        ret = readl_poll_timeout(fmc2->io_base + FMC2_BCHISR, bchisr,
-                                bchisr & FMC2_BCHISR_EPBRF, 10000);
+                                bchisr & FMC2_BCHISR_EPBRF, FMC2_TIMEOUT_5S);
        if (ret < 0) {
                pr_err("Bch timeout\n");
                return ret;
@@ -472,7 +474,7 @@ static int stm32_fmc2_bch_correct(struct mtd_info *mtd, u8 *dat,
 
        /* Wait until the decoding error is ready */
        ret = readl_poll_timeout(fmc2->io_base + FMC2_BCHISR, bchisr,
-                                bchisr & FMC2_BCHISR_DERF, 10000);
+                                bchisr & FMC2_BCHISR_DERF, FMC2_TIMEOUT_5S);
        if (ret < 0) {
                pr_err("Bch timeout\n");
                return ret;