#include <asm/uasm.h>
#include <asm/octeon/octeon.h>
+#include <asm/octeon/cvmx-boot-vector.h>
/* The count needed to achieve timeout_sec. */
static unsigned int timeout_cnt;
"Watchdog cannot be stopped once started (default="
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-static u32 nmi_stage1_insns[64] __initdata;
-/* We need one branch and therefore one relocation per target label. */
-static struct uasm_label labels[5] __initdata;
-static struct uasm_reloc relocs[5] __initdata;
-
-enum lable_id {
- label_enter_bootloader = 1
-};
-
-/* Some CP0 registers */
-#define K0 26
-#define C0_CVMMEMCTL 11, 7
-#define C0_STATUS 12, 0
-#define C0_EBASE 15, 1
-#define C0_DESAVE 31, 0
+static struct cvmx_boot_vector_element *octeon_wdt_bootvector;
void octeon_wdt_nmi_stage2(void);
-static void __init octeon_wdt_build_stage1(void)
-{
- int i;
- int len;
- u32 *p = nmi_stage1_insns;
-#ifdef CONFIG_HOTPLUG_CPU
- struct uasm_label *l = labels;
- struct uasm_reloc *r = relocs;
-#endif
-
- /*
- * For the next few instructions running the debugger may
- * cause corruption of k0 in the saved registers. Since we're
- * about to crash, nobody probably cares.
- *
- * Save K0 into the debug scratch register
- */
- uasm_i_dmtc0(&p, K0, C0_DESAVE);
-
- uasm_i_mfc0(&p, K0, C0_STATUS);
-#ifdef CONFIG_HOTPLUG_CPU
- if (octeon_bootloader_entry_addr)
- uasm_il_bbit0(&p, &r, K0, ilog2(ST0_NMI),
- label_enter_bootloader);
-#endif
- /* Force 64-bit addressing enabled */
- uasm_i_ori(&p, K0, K0, ST0_UX | ST0_SX | ST0_KX);
- uasm_i_mtc0(&p, K0, C0_STATUS);
-
-#ifdef CONFIG_HOTPLUG_CPU
- if (octeon_bootloader_entry_addr) {
- uasm_i_mfc0(&p, K0, C0_EBASE);
- /* Coreid number in K0 */
- uasm_i_andi(&p, K0, K0, 0xf);
- /* 8 * coreid in bits 16-31 */
- uasm_i_dsll_safe(&p, K0, K0, 3 + 16);
- uasm_i_ori(&p, K0, K0, 0x8001);
- uasm_i_dsll_safe(&p, K0, K0, 16);
- uasm_i_ori(&p, K0, K0, 0x0700);
- uasm_i_drotr_safe(&p, K0, K0, 32);
- /*
- * Should result in: 0x8001,0700,0000,8*coreid which is
- * CVMX_CIU_WDOGX(coreid) - 0x0500
- *
- * Now ld K0, CVMX_CIU_WDOGX(coreid)
- */
- uasm_i_ld(&p, K0, 0x500, K0);
- /*
- * If bit one set handle the NMI as a watchdog event.
- * otherwise transfer control to bootloader.
- */
- uasm_il_bbit0(&p, &r, K0, 1, label_enter_bootloader);
- uasm_i_nop(&p);
- }
-#endif
-
- /* Clear Dcache so cvmseg works right. */
- uasm_i_cache(&p, 1, 0, 0);
-
- /* Use K0 to do a read/modify/write of CVMMEMCTL */
- uasm_i_dmfc0(&p, K0, C0_CVMMEMCTL);
- /* Clear out the size of CVMSEG */
- uasm_i_dins(&p, K0, 0, 0, 6);
- /* Set CVMSEG to its largest value */
- uasm_i_ori(&p, K0, K0, 0x1c0 | 54);
- /* Store the CVMMEMCTL value */
- uasm_i_dmtc0(&p, K0, C0_CVMMEMCTL);
-
- /* Load the address of the second stage handler */
- UASM_i_LA(&p, K0, (long)octeon_wdt_nmi_stage2);
- uasm_i_jr(&p, K0);
- uasm_i_dmfc0(&p, K0, C0_DESAVE);
-
-#ifdef CONFIG_HOTPLUG_CPU
- if (octeon_bootloader_entry_addr) {
- uasm_build_label(&l, p, label_enter_bootloader);
- /* Jump to the bootloader and restore K0 */
- UASM_i_LA(&p, K0, (long)octeon_bootloader_entry_addr);
- uasm_i_jr(&p, K0);
- uasm_i_dmfc0(&p, K0, C0_DESAVE);
- }
-#endif
- uasm_resolve_relocs(relocs, labels);
-
- len = (int)(p - nmi_stage1_insns);
- pr_debug("Synthesized NMI stage 1 handler (%d instructions)\n", len);
-
- pr_debug("\t.set push\n");
- pr_debug("\t.set noreorder\n");
- for (i = 0; i < len; i++)
- pr_debug("\t.word 0x%08x\n", nmi_stage1_insns[i]);
- pr_debug("\t.set pop\n");
-
- if (len > 32)
- panic("NMI stage 1 handler exceeds 32 instructions, was %d\n",
- len);
-}
-
static int cpu2core(int cpu)
{
#ifdef CONFIG_SMP
core = cpu2core(cpu);
+ octeon_wdt_bootvector[core].target_ptr = (u64)octeon_wdt_nmi_stage2;
+
/* Disable it before doing anything with the interrupts. */
ciu_wdog.u64 = 0;
cvmx_write_csr(CVMX_CIU_WDOGX(core), ciu_wdog.u64);
int ret;
u64 *ptr;
+ octeon_wdt_bootvector = cvmx_boot_vector_get();
+ if (!octeon_wdt_bootvector) {
+ pr_err("Error: Cannot allocate boot vector.\n");
+ return -ENOMEM;
+ }
+
/*
* Watchdog time expiration length = The 16 bits of LEN
* represent the most significant bits of a 24 bit decrementer
return ret;
}
- /* Build the NMI handler ... */
- octeon_wdt_build_stage1();
-
- /* ... and install it. */
- ptr = (u64 *) nmi_stage1_insns;
- for (i = 0; i < 16; i++) {
- cvmx_write_csr(CVMX_MIO_BOOT_LOC_ADR, i * 8);
- cvmx_write_csr(CVMX_MIO_BOOT_LOC_DAT, ptr[i]);
- }
- cvmx_write_csr(CVMX_MIO_BOOT_LOC_CFGX(0), 0x81fc0000);
-
cpumask_clear(&irq_enabled_cpus);
ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "watchdog/octeon:online",
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2007 Cavium Networks
+ * Copyright (C) 2007-2017 Cavium, Inc.
*/
#include <asm/asm.h>
#include <asm/regdef.h>
-#define SAVE_REG(r) sd $r, -32768+6912-(32-r)*8($0)
+#define CVMSEG_BASE -32768
+#define CVMSEG_SIZE 6912
+#define SAVE_REG(r) sd $r, CVMSEG_BASE + CVMSEG_SIZE - ((32 - r) * 8)($0)
NESTED(octeon_wdt_nmi_stage2, 0, sp)
.set push
.set noreorder
.set noat
- /* Save all registers to the top CVMSEG. This shouldn't
+ /* Clear Dcache so cvmseg works right. */
+ cache 1,0($0)
+ /* Use K0 to do a read/modify/write of CVMMEMCTL */
+ dmfc0 k0, $11, 7
+ /* Clear out the size of CVMSEG */
+ dins k0, $0, 0, 6
+ /* Set CVMSEG to its largest value */
+ ori k0, k0, 0x1c0 | 54
+ /* Store the CVMMEMCTL value */
+ dmtc0 k0, $11, 7
+ /*
+ * Restore K0 from the debug scratch register, it was saved in
+ * the boot-vector code.
+ */
+ dmfc0 k0, $31
+
+ /*
+ * Save all registers to the top CVMSEG. This shouldn't
* corrupt any state used by the kernel. Also all registers
- * should have the value right before the NMI. */
+ * should have the value right before the NMI.
+ */
SAVE_REG(0)
SAVE_REG(1)
SAVE_REG(2)
SAVE_REG(29)
SAVE_REG(30)
SAVE_REG(31)
+ /* Write zero to all CVMSEG locations per Core-15169 */
+ dli a0, CVMSEG_SIZE - (33 * 8)
+1: sd zero, CVMSEG_BASE(a0)
+ daddiu a0, a0, -8
+ bgez a0, 1b
+ nop
/* Set the stack to begin right below the registers */
- li sp, -32768+6912-32*8
+ dli sp, CVMSEG_BASE + CVMSEG_SIZE - (32 * 8)
/* Load the address of the third stage handler */
- dla a0, octeon_wdt_nmi_stage3
+ dla $25, octeon_wdt_nmi_stage3
/* Call the third stage handler */
- jal a0
+ jal $25
/* a0 is the address of the saved registers */
move a0, sp
/* Loop forvever if we get here. */
-1: b 1b
+2: b 2b
nop
.set pop
END(octeon_wdt_nmi_stage2)
projects / platform / kernel / linux-rpi.git / commitdiff