esp: use tty_port

Switch esp to use the new tty_port structures

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/drivers/char/esp.c b/drivers/char/esp.c
index 84840ba..2eaf09f 100644 (file)
--- a/drivers/char/esp.c
+++ b/drivers/char/esp.c
@@ -128,9 +128,9 @@ static struct tty_driver *esp_driver;
 
 #if defined(MODULE) && defined(SERIAL_DEBUG_MCOUNT)
 #define DBG_CNT(s) printk(KERN_DEBUG "(%s): [%x] refc=%d, serc=%d, ttyc=%d -> %s\n", \
-                               tty->name, info->flags, \
+                               tty->name, info->port.flags, \
                                serial_driver.refcount, \
-                               info->count, tty->count, s)
+                               info->port.count, tty->count, s)
 #else
 #define DBG_CNT(s)
 #endif
@@ -172,13 +172,13 @@ static inline int serial_paranoia_check(struct esp_struct *info,
 
 static inline unsigned int serial_in(struct esp_struct *info, int offset)
 {
-       return inb(info->port + offset);
+       return inb(info->io_port + offset);
 }
 
 static inline void serial_out(struct esp_struct *info, int offset,
                              unsigned char value)
 {
-       outb(value, info->port+offset);
+       outb(value, info->io_port+offset);
 }
 
 /*
@@ -273,7 +273,7 @@ static inline void release_pio_buffer(struct esp_pio_buffer *buf)
 
 static inline void receive_chars_pio(struct esp_struct *info, int num_bytes)
 {
-       struct tty_struct *tty = info->tty;
+       struct tty_struct *tty = info->port.tty;
        int i;
        struct esp_pio_buffer *pio_buf;
        struct esp_pio_buffer *err_buf;
@@ -295,7 +295,7 @@ static inline void receive_chars_pio(struct esp_struct *info, int num_bytes)
 
        for (i = 0; i < num_bytes - 1; i += 2) {
                *((unsigned short *)(pio_buf->data + i)) =
-                       inw(info->port + UART_ESI_RX);
+                       inw(info->io_port + UART_ESI_RX);
                err_buf->data[i] = serial_in(info, UART_ESI_RWS);
                err_buf->data[i + 1] = (err_buf->data[i] >> 3) & status_mask;
                err_buf->data[i] &= status_mask;
@@ -308,7 +308,7 @@ static inline void receive_chars_pio(struct esp_struct *info, int num_bytes)
        }
 
        /* make sure everything is still ok since interrupts were enabled */
-       tty = info->tty;
+       tty = info->port.tty;
 
        if (!tty) {
                release_pio_buffer(pio_buf);
@@ -325,7 +325,7 @@ static inline void receive_chars_pio(struct esp_struct *info, int num_bytes)
 
                        if (err_buf->data[i] & 0x04) {
                                flag = TTY_BREAK;
-                               if (info->flags & ASYNC_SAK)
+                               if (info->port.flags & ASYNC_SAK)
                                        do_SAK(tty);
                        } else if (err_buf->data[i] & 0x02)
                                flag = TTY_FRAME;
@@ -370,7 +370,7 @@ static void receive_chars_dma(struct esp_struct *info, int num_bytes)
 static inline void receive_chars_dma_done(struct esp_struct *info,
                                            int status)
 {
-       struct tty_struct *tty = info->tty;
+       struct tty_struct *tty = info->port.tty;
        int num_bytes;
        unsigned long flags;
 
@@ -396,7 +396,7 @@ static inline void receive_chars_dma_done(struct esp_struct *info,
                        if (status & 0x10) {
                                statflag = TTY_BREAK;
                                (info->icount.brk)++;
-                               if (info->flags & ASYNC_SAK)
+                               if (info->port.flags & ASYNC_SAK)
                                        do_SAK(tty);
                        } else if (status & 0x08) {
                                statflag = TTY_FRAME;
@@ -451,7 +451,7 @@ static inline void transmit_chars_pio(struct esp_struct *info,
 
                for (i = 0; i < space_avail - 1; i += 2) {
                        outw(*((unsigned short *)(pio_buf->data + i)),
-                            info->port + UART_ESI_TX);
+                            info->io_port + UART_ESI_TX);
                }
 
                if (space_avail & 0x0001)
@@ -470,8 +470,8 @@ static inline void transmit_chars_pio(struct esp_struct *info,
        }
 
        if (info->xmit_cnt < WAKEUP_CHARS) {
-               if (info->tty)
-                       tty_wakeup(info->tty);
+               if (info->port.tty)
+                       tty_wakeup(info->port.tty);
 
 #ifdef SERIAL_DEBUG_INTR
                printk("THRE...");
@@ -507,8 +507,8 @@ static inline void transmit_chars_dma(struct esp_struct *info, int num_bytes)
        info->xmit_tail = (info->xmit_tail + dma_bytes) & (ESP_XMIT_SIZE - 1);
 
        if (info->xmit_cnt < WAKEUP_CHARS) {
-               if (info->tty)
-                       tty_wakeup(info->tty);
+               if (info->port.tty)
+                       tty_wakeup(info->port.tty);
 
 #ifdef SERIAL_DEBUG_INTR
                printk("THRE...");
@@ -575,18 +575,18 @@ static void check_modem_status(struct esp_struct *info)
                wake_up_interruptible(&info->delta_msr_wait);
        }
 
-       if ((info->flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) {
+       if ((info->port.flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) {
 #if (defined(SERIAL_DEBUG_OPEN) || defined(SERIAL_DEBUG_INTR))
                printk("ttys%d CD now %s...", info->line,
                       (status & UART_MSR_DCD) ? "on" : "off");
 #endif
                if (status & UART_MSR_DCD)
-                       wake_up_interruptible(&info->open_wait);
+                       wake_up_interruptible(&info->port.open_wait);
                else {
 #ifdef SERIAL_DEBUG_OPEN
                        printk("scheduling hangup...");
 #endif
-                       tty_hangup(info->tty);
+                       tty_hangup(info->port.tty);
                }
        }
 }
@@ -609,7 +609,7 @@ static irqreturn_t rs_interrupt_single(int irq, void *dev_id)
 
        spin_lock(&info->lock);
 
-       if (!info->tty) {
+       if (!info->port.tty) {
                spin_unlock(&info->lock);
                return IRQ_NONE;
        }
@@ -647,7 +647,7 @@ static irqreturn_t rs_interrupt_single(int irq, void *dev_id)
                num_bytes = serial_in(info, UART_ESI_STAT1) << 8;
                num_bytes |= serial_in(info, UART_ESI_STAT2);
 
-               num_bytes = tty_buffer_request_room(info->tty, num_bytes);
+               num_bytes = tty_buffer_request_room(info->port.tty, num_bytes);
 
                if (num_bytes) {
                        if (dma_bytes ||
@@ -661,7 +661,7 @@ static irqreturn_t rs_interrupt_single(int irq, void *dev_id)
 
        if (!(info->stat_flags & (ESP_STAT_DMA_RX | ESP_STAT_DMA_TX)) &&
            (scratch & 0x02) && (info->IER & UART_IER_THRI)) {
-               if ((info->xmit_cnt <= 0) || info->tty->stopped) {
+               if ((info->xmit_cnt <= 0) || info->port.tty->stopped) {
                        info->IER &= ~UART_IER_THRI;
                        serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK);
                        serial_out(info, UART_ESI_CMD2, info->IER);
@@ -782,7 +782,7 @@ static int startup(struct esp_struct *info)
 
        spin_lock_irqsave(&info->lock, flags);
 
-       if (info->flags & ASYNC_INITIALIZED)
+       if (info->port.flags & ASYNC_INITIALIZED)
                goto out;
 
        if (!info->xmit_buf) {
@@ -806,7 +806,7 @@ static int startup(struct esp_struct *info)
        num_chars |= serial_in(info, UART_ESI_STAT2);
 
        while (num_chars > 1) {
-               inw(info->port + UART_ESI_RX);
+               inw(info->io_port + UART_ESI_RX);
                num_chars -= 2;
        }
 
@@ -834,9 +834,9 @@ static int startup(struct esp_struct *info)
 
        if (retval) {
                if (capable(CAP_SYS_ADMIN)) {
-                       if (info->tty)
+                       if (info->port.tty)
                                set_bit(TTY_IO_ERROR,
-                                       &info->tty->flags);
+                                       &info->port.tty->flags);
                        retval = 0;
                }
                goto out_unlocked;
@@ -874,30 +874,30 @@ static int startup(struct esp_struct *info)
        serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK);
        serial_out(info, UART_ESI_CMD2, info->IER);
 
-       if (info->tty)
-               clear_bit(TTY_IO_ERROR, &info->tty->flags);
+       if (info->port.tty)
+               clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
        info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
        spin_unlock_irqrestore(&info->lock, flags);
 
        /*
         * Set up the tty->alt_speed kludge
         */
-       if (info->tty) {
-               if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
-                       info->tty->alt_speed = 57600;
-               if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
-                       info->tty->alt_speed = 115200;
-               if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
-                       info->tty->alt_speed = 230400;
-               if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
-                       info->tty->alt_speed = 460800;
+       if (info->port.tty) {
+               if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+                       info->port.tty->alt_speed = 57600;
+               if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+                       info->port.tty->alt_speed = 115200;
+               if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+                       info->port.tty->alt_speed = 230400;
+               if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+                       info->port.tty->alt_speed = 460800;
        }
 
        /*
         * set the speed of the serial port
         */
        change_speed(info);
-       info->flags |= ASYNC_INITIALIZED;
+       info->port.flags |= ASYNC_INITIALIZED;
        return 0;
 
 out:
@@ -914,7 +914,7 @@ static void shutdown(struct esp_struct *info)
 {
        unsigned long   flags, f;
 
-       if (!(info->flags & ASYNC_INITIALIZED))
+       if (!(info->port.flags & ASYNC_INITIALIZED))
                return;
 
 #ifdef SERIAL_DEBUG_OPEN
@@ -951,7 +951,7 @@ static void shutdown(struct esp_struct *info)
 
                while (current_port) {
                        if ((current_port != info) &&
-                           (current_port->flags & ASYNC_INITIALIZED))
+                           (current_port->port.flags & ASYNC_INITIALIZED))
                                break;
 
                        current_port = current_port->next_port;
@@ -974,7 +974,7 @@ static void shutdown(struct esp_struct *info)
        serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK);
        serial_out(info, UART_ESI_CMD2, 0x00);
 
-       if (!info->tty || (info->tty->termios->c_cflag & HUPCL))
+       if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL))
                info->MCR &= ~(UART_MCR_DTR|UART_MCR_RTS);
 
        info->MCR &= ~UART_MCR_OUT2;
@@ -982,10 +982,10 @@ static void shutdown(struct esp_struct *info)
        serial_out(info, UART_ESI_CMD2, UART_MCR);
        serial_out(info, UART_ESI_CMD2, info->MCR);
 
-       if (info->tty)
-               set_bit(TTY_IO_ERROR, &info->tty->flags);
+       if (info->port.tty)
+               set_bit(TTY_IO_ERROR, &info->port.tty->flags);
 
-       info->flags &= ~ASYNC_INITIALIZED;
+       info->port.flags &= ~ASYNC_INITIALIZED;
        spin_unlock_irqrestore(&info->lock, flags);
 }
 
@@ -1002,10 +1002,10 @@ static void change_speed(struct esp_struct *info)
        unsigned char flow1 = 0, flow2 = 0;
        unsigned long flags;
 
-       if (!info->tty || !info->tty->termios)
+       if (!info->port.tty || !info->port.tty->termios)
                return;
-       cflag = info->tty->termios->c_cflag;
-       port = info->port;
+       cflag = info->port.tty->termios->c_cflag;
+       port = info->io_port;
 
        /* byte size and parity */
        switch (cflag & CSIZE) {
@@ -1029,9 +1029,9 @@ static void change_speed(struct esp_struct *info)
        if (cflag & CMSPAR)
                cval |= UART_LCR_SPAR;
 #endif
-       baud = tty_get_baud_rate(info->tty);
+       baud = tty_get_baud_rate(info->port.tty);
        if (baud == 38400 &&
-               ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST))
+               ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST))
                quot = info->custom_divisor;
        else {
                if (baud == 134) /* Special case since 134 is really 134.5 */
@@ -1046,49 +1046,49 @@ static void change_speed(struct esp_struct *info)
        if (baud) {
                /* Actual rate */
                baud = BASE_BAUD/quot;
-               tty_encode_baud_rate(info->tty, baud, baud);
+               tty_encode_baud_rate(info->port.tty, baud, baud);
        }
        info->timeout = ((1024 * HZ * bits * quot) / BASE_BAUD) + (HZ / 50);
 
        /* CTS flow control flag and modem status interrupts */
        /* info->IER &= ~UART_IER_MSI; */
        if (cflag & CRTSCTS) {
-               info->flags |= ASYNC_CTS_FLOW;
+               info->port.flags |= ASYNC_CTS_FLOW;
                /* info->IER |= UART_IER_MSI; */
                flow1 = 0x04;
                flow2 = 0x10;
        } else
-               info->flags &= ~ASYNC_CTS_FLOW;
+               info->port.flags &= ~ASYNC_CTS_FLOW;
        if (cflag & CLOCAL)
-               info->flags &= ~ASYNC_CHECK_CD;
+               info->port.flags &= ~ASYNC_CHECK_CD;
        else
-               info->flags |= ASYNC_CHECK_CD;
+               info->port.flags |= ASYNC_CHECK_CD;
 
        /*
         * Set up parity check flag
         */
        info->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
-       if (I_INPCK(info->tty))
+       if (I_INPCK(info->port.tty))
                info->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
-       if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
+       if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
                info->read_status_mask |= UART_LSR_BI;
 
        info->ignore_status_mask = 0;
 #if 0
        /* This should be safe, but for some broken bits of hardware... */
-       if (I_IGNPAR(info->tty)) {
+       if (I_IGNPAR(info->port.tty)) {
                info->ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
                info->read_status_mask |= UART_LSR_PE | UART_LSR_FE;
        }
 #endif
-       if (I_IGNBRK(info->tty)) {
+       if (I_IGNBRK(info->port.tty)) {
                info->ignore_status_mask |= UART_LSR_BI;
                info->read_status_mask |= UART_LSR_BI;
                /*
                 * If we're ignore parity and break indicators, ignore
                 * overruns too.  (For real raw support).
                 */
-               if (I_IGNPAR(info->tty)) {
+               if (I_IGNPAR(info->port.tty)) {
                        info->ignore_status_mask |= UART_LSR_OE | \
                                UART_LSR_PE | UART_LSR_FE;
                        info->read_status_mask |= UART_LSR_OE | \
@@ -1096,7 +1096,7 @@ static void change_speed(struct esp_struct *info)
                }
        }
 
-       if (I_IXOFF(info->tty))
+       if (I_IXOFF(info->port.tty))
                flow1 |= 0x81;
 
        spin_lock_irqsave(&info->lock, flags);
@@ -1116,10 +1116,10 @@ static void change_speed(struct esp_struct *info)
        serial_out(info, UART_ESI_CMD2, flow2);
 
        /* set flow control characters (XON/XOFF only) */
-       if (I_IXOFF(info->tty)) {
+       if (I_IXOFF(info->port.tty)) {
                serial_out(info, UART_ESI_CMD1, ESI_SET_FLOW_CHARS);
-               serial_out(info, UART_ESI_CMD2, START_CHAR(info->tty));
-               serial_out(info, UART_ESI_CMD2, STOP_CHAR(info->tty));
+               serial_out(info, UART_ESI_CMD2, START_CHAR(info->port.tty));
+               serial_out(info, UART_ESI_CMD2, STOP_CHAR(info->port.tty));
                serial_out(info, UART_ESI_CMD2, 0x10);
                serial_out(info, UART_ESI_CMD2, 0x21);
                switch (cflag & CSIZE) {
@@ -1355,9 +1355,9 @@ static int get_serial_info(struct esp_struct *info,
        memset(&tmp, 0, sizeof(tmp));
        tmp.type = PORT_16550A;
        tmp.line = info->line;
-       tmp.port = info->port;
+       tmp.port = info->io_port;
        tmp.irq = info->irq;
-       tmp.flags = info->flags;
+       tmp.flags = info->port.flags;
        tmp.xmit_fifo_size = 1024;
        tmp.baud_base = BASE_BAUD;
        tmp.close_delay = info->close_delay;
@@ -1407,7 +1407,7 @@ static int set_serial_info(struct esp_struct *info,
 
        if ((new_serial.type != PORT_16550A) ||
            (new_serial.hub6) ||
-           (info->port != new_serial.port) ||
+           (info->io_port != new_serial.port) ||
            (new_serial.baud_base != BASE_BAUD) ||
            (new_serial.irq > 15) ||
            (new_serial.irq < 2) ||
@@ -1425,9 +1425,9 @@ static int set_serial_info(struct esp_struct *info,
                if (change_irq ||
                    (new_serial.close_delay != info->close_delay) ||
                    ((new_serial.flags & ~ASYNC_USR_MASK) !=
-                    (info->flags & ~ASYNC_USR_MASK)))
+                    (info->port.flags & ~ASYNC_USR_MASK)))
                        return -EPERM;
-               info->flags = ((info->flags & ~ASYNC_USR_MASK) |
+               info->port.flags = ((info->port.flags & ~ASYNC_USR_MASK) |
                               (new_serial.flags & ASYNC_USR_MASK));
                info->custom_divisor = new_serial.custom_divisor;
        } else {
@@ -1441,9 +1441,9 @@ static int set_serial_info(struct esp_struct *info,
                                if ((current_async->line >= info->line) &&
                                    (current_async->line < (info->line + 8))) {
                                        if (current_async == info) {
-                                               if (current_async->count > 1)
+                                               if (current_async->port.count > 1)
                                                        return -EBUSY;
-                                       } else if (current_async->count)
+                                       } else if (current_async->port.count)
                                                return -EBUSY;
                                }
 
@@ -1456,7 +1456,7 @@ static int set_serial_info(struct esp_struct *info,
                 * At this point, we start making changes.....
                 */
 
-               info->flags = ((info->flags & ~ASYNC_FLAGS) |
+               info->port.flags = ((info->port.flags & ~ASYNC_FLAGS) |
                               (new_serial.flags & ASYNC_FLAGS));
                info->custom_divisor = new_serial.custom_divisor;
                info->close_delay = new_serial.close_delay * HZ/100;
@@ -1487,18 +1487,18 @@ static int set_serial_info(struct esp_struct *info,
                }
        }
 
-       if (info->flags & ASYNC_INITIALIZED) {
-               if (((old_info.flags & ASYNC_SPD_MASK) !=
-                    (info->flags & ASYNC_SPD_MASK)) ||
+       if (info->port.flags & ASYNC_INITIALIZED) {
+               if (((old_info.port.flags & ASYNC_SPD_MASK) !=
+                    (info->port.flags & ASYNC_SPD_MASK)) ||
                    (old_info.custom_divisor != info->custom_divisor)) {
-                       if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
-                               info->tty->alt_speed = 57600;
-                       if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
-                               info->tty->alt_speed = 115200;
-                       if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
-                               info->tty->alt_speed = 230400;
-                       if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
-                               info->tty->alt_speed = 460800;
+                       if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+                               info->port.tty->alt_speed = 57600;
+                       if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+                               info->port.tty->alt_speed = 115200;
+                       if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+                               info->port.tty->alt_speed = 230400;
+                       if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+                               info->port.tty->alt_speed = 460800;
                        change_speed(info);
                }
        } else
@@ -1554,9 +1554,9 @@ static int set_esp_config(struct esp_struct *info,
 
                        while (current_async) {
                                if (current_async == info) {
-                                       if (current_async->count > 1)
+                                       if (current_async->port.count > 1)
                                                return -EBUSY;
-                               } else if (current_async->count)
+                               } else if (current_async->port.count)
                                        return -EBUSY;
 
                                current_async = current_async->next_port;
@@ -1578,7 +1578,7 @@ static int set_esp_config(struct esp_struct *info,
                        spin_unlock_irqrestore(&info->lock, flags);
                } else {
                        /* DMA mode to PIO mode only */
-                       if (info->count > 1)
+                       if (info->port.count > 1)
                                return -EBUSY;
 
                        shutdown(info);
@@ -1634,7 +1634,7 @@ static int set_esp_config(struct esp_struct *info,
                spin_unlock_irqrestore(&info->lock, flags);
        }
 
-       if (!(info->flags & ASYNC_INITIALIZED))
+       if (!(info->port.flags & ASYNC_INITIALIZED))
                retval = startup(info);
 
        return retval;
@@ -1917,9 +1917,9 @@ static void rs_close(struct tty_struct *tty, struct file *filp)
 
 #ifdef SERIAL_DEBUG_OPEN
        printk(KERN_DEBUG "rs_close ttys%d, count = %d\n",
-                                               info->line, info->count);
+                                               info->line, info->port.count);
 #endif
-       if (tty->count == 1 && info->count != 1) {
+       if (tty->count == 1 && info->port.count != 1) {
                /*
                 * Uh, oh.  tty->count is 1, which means that the tty
                 * structure will be freed.  Info->count should always
@@ -1927,19 +1927,19 @@ static void rs_close(struct tty_struct *tty, struct file *filp)
                 * one, we've got real problems, since it means the
                 * serial port won't be shutdown.
                 */
-               printk(KERN_DEBUG "rs_close: bad serial port count; tty->count is 1, info->count is %d\n", info->count);
-               info->count = 1;
+               printk(KERN_DEBUG "rs_close: bad serial port count; tty->count is 1, info->port.count is %d\n", info->port.count);
+               info->port.count = 1;
        }
-       if (--info->count < 0) {
+       if (--info->port.count < 0) {
                printk(KERN_ERR "rs_close: bad serial port count for ttys%d: %d\n",
-                      info->line, info->count);
-               info->count = 0;
+                      info->line, info->port.count);
+               info->port.count = 0;
        }
-       if (info->count) {
+       if (info->port.count) {
                DBG_CNT("before DEC-2");
                goto out;
        }
-       info->flags |= ASYNC_CLOSING;
+       info->port.flags |= ASYNC_CLOSING;
 
        spin_unlock_irqrestore(&info->lock, flags);
        /*
@@ -1958,7 +1958,7 @@ static void rs_close(struct tty_struct *tty, struct file *filp)
        /* info->IER &= ~UART_IER_RLSI; */
        info->IER &= ~UART_IER_RDI;
        info->read_status_mask &= ~UART_LSR_DR;
-       if (info->flags & ASYNC_INITIALIZED) {
+       if (info->port.flags & ASYNC_INITIALIZED) {
 
                spin_lock_irqsave(&info->lock, flags);
                serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK);
@@ -1981,15 +1981,15 @@ static void rs_close(struct tty_struct *tty, struct file *filp)
        rs_flush_buffer(tty);
        tty_ldisc_flush(tty);
        tty->closing = 0;
-       info->tty = NULL;
+       info->port.tty = NULL;
 
-       if (info->blocked_open) {
+       if (info->port.blocked_open) {
                if (info->close_delay)
                        msleep_interruptible(jiffies_to_msecs(info->close_delay));
-               wake_up_interruptible(&info->open_wait);
+               wake_up_interruptible(&info->port.open_wait);
        }
-       info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
-       wake_up_interruptible(&info->close_wait);
+       info->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
+       wake_up_interruptible(&info->port.close_wait);
        return;
 
 out:
@@ -2047,10 +2047,10 @@ static void esp_hangup(struct tty_struct *tty)
 
        rs_flush_buffer(tty);
        shutdown(info);
-       info->count = 0;
-       info->flags &= ~ASYNC_NORMAL_ACTIVE;
-       info->tty = NULL;
-       wake_up_interruptible(&info->open_wait);
+       info->port.count = 0;
+       info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
+       info->port.tty = NULL;
+       wake_up_interruptible(&info->port.open_wait);
 }
 
 /*
@@ -2071,11 +2071,11 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
         * until it's done, and then try again.
         */
        if (tty_hung_up_p(filp) ||
-           (info->flags & ASYNC_CLOSING)) {
-               if (info->flags & ASYNC_CLOSING)
-                       interruptible_sleep_on(&info->close_wait);
+           (info->port.flags & ASYNC_CLOSING)) {
+               if (info->port.flags & ASYNC_CLOSING)
+                       interruptible_sleep_on(&info->port.close_wait);
 #ifdef SERIAL_DO_RESTART
-               if (info->flags & ASYNC_HUP_NOTIFY)
+               if (info->port.flags & ASYNC_HUP_NOTIFY)
                        return -EAGAIN;
                else
                        return -ERESTARTSYS;
@@ -2090,7 +2090,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
         */
        if ((filp->f_flags & O_NONBLOCK) ||
            (tty->flags & (1 << TTY_IO_ERROR))) {
-               info->flags |= ASYNC_NORMAL_ACTIVE;
+               info->port.flags |= ASYNC_NORMAL_ACTIVE;
                return 0;
        }
 
@@ -2100,20 +2100,20 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
        /*
         * Block waiting for the carrier detect and the line to become
         * free (i.e., not in use by the callout).  While we are in
-        * this loop, info->count is dropped by one, so that
+        * this loop, info->port.count is dropped by one, so that
         * rs_close() knows when to free things.  We restore it upon
         * exit, either normal or abnormal.
         */
        retval = 0;
-       add_wait_queue(&info->open_wait, &wait);
+       add_wait_queue(&info->port.open_wait, &wait);
 #ifdef SERIAL_DEBUG_OPEN
        printk(KERN_DEBUG "block_til_ready before block: ttys%d, count = %d\n",
-              info->line, info->count);
+              info->line, info->port.count);
 #endif
        spin_lock_irqsave(&info->lock, flags);
        if (!tty_hung_up_p(filp))
-               info->count--;
-       info->blocked_open++;
+               info->port.count--;
+       info->port.blocked_open++;
        while (1) {
                if ((tty->termios->c_cflag & CBAUD)) {
                        unsigned int scratch;
@@ -2128,9 +2128,9 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
                }
                set_current_state(TASK_INTERRUPTIBLE);
                if (tty_hung_up_p(filp) ||
-                   !(info->flags & ASYNC_INITIALIZED)) {
+                   !(info->port.flags & ASYNC_INITIALIZED)) {
 #ifdef SERIAL_DO_RESTART
-                       if (info->flags & ASYNC_HUP_NOTIFY)
+                       if (info->port.flags & ASYNC_HUP_NOTIFY)
                                retval = -EAGAIN;
                        else
                                retval = -ERESTARTSYS;
@@ -2144,7 +2144,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
                if (serial_in(info, UART_ESI_STAT2) & UART_MSR_DCD)
                        do_clocal = 1;
 
-               if (!(info->flags & ASYNC_CLOSING) &&
+               if (!(info->port.flags & ASYNC_CLOSING) &&
                    (do_clocal))
                        break;
                if (signal_pending(current)) {
@@ -2153,25 +2153,25 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
                }
 #ifdef SERIAL_DEBUG_OPEN
                printk(KERN_DEBUG "block_til_ready blocking: ttys%d, count = %d\n",
-                      info->line, info->count);
+                      info->line, info->port.count);
 #endif
                spin_unlock_irqrestore(&info->lock, flags);
                schedule();
                spin_lock_irqsave(&info->lock, flags);
        }
        set_current_state(TASK_RUNNING);
-       remove_wait_queue(&info->open_wait, &wait);
+       remove_wait_queue(&info->port.open_wait, &wait);
        if (!tty_hung_up_p(filp))
-               info->count++;
-       info->blocked_open--;
+               info->port.count++;
+       info->port.blocked_open--;
        spin_unlock_irqrestore(&info->lock, flags);
 #ifdef SERIAL_DEBUG_OPEN
        printk(KERN_DEBUG "block_til_ready after blocking: ttys%d, count = %d\n",
-              info->line, info->count);
+              info->line, info->port.count);
 #endif
        if (retval)
                return retval;
-       info->flags |= ASYNC_NORMAL_ACTIVE;
+       info->port.flags |= ASYNC_NORMAL_ACTIVE;
        return 0;
 }
 
@@ -2204,12 +2204,12 @@ static int esp_open(struct tty_struct *tty, struct file *filp)
        }
 
 #ifdef SERIAL_DEBUG_OPEN
-       printk(KERN_DEBUG "esp_open %s, count = %d\n", tty->name, info->count);
+       printk(KERN_DEBUG "esp_open %s, count = %d\n", tty->name, info->port.count);
 #endif
        spin_lock_irqsave(&info->lock, flags);
-       info->count++;
+       info->port.count++;
        tty->driver_data = info;
-       info->tty = tty;
+       info->port.tty = tty;
 
        spin_unlock_irqrestore(&info->lock, flags);
 
@@ -2263,7 +2263,7 @@ static int autoconfig(struct esp_struct *info)
        int port_detected = 0;
        unsigned long flags;
 
-       if (!request_region(info->port, REGION_SIZE, "esp serial"))
+       if (!request_region(info->io_port, REGION_SIZE, "esp serial"))
                return -EIO;
 
        spin_lock_irqsave(&info->lock, flags);
@@ -2300,7 +2300,7 @@ static int autoconfig(struct esp_struct *info)
                }
        }
        if (!port_detected)
-               release_region(info->port, REGION_SIZE);
+               release_region(info->io_port, REGION_SIZE);
 
        spin_unlock_irqrestore(&info->lock, flags);
        return (port_detected);
@@ -2414,7 +2414,7 @@ static int __init espserial_init(void)
        offset = 0;
 
        do {
-               info->port = esp[i] + offset;
+               info->io_port = esp[i] + offset;
                info->irq = irq[i];
                info->line = (i * 8) + (offset / 8);
 
@@ -2425,9 +2425,9 @@ static int __init espserial_init(void)
                }
 
                info->custom_divisor = (divisor[i] >> (offset / 2)) & 0xf;
-               info->flags = STD_COM_FLAGS;
+               info->port.flags = STD_COM_FLAGS;
                if (info->custom_divisor)
-                       info->flags |= ASYNC_SPD_CUST;
+                       info->port.flags |= ASYNC_SPD_CUST;
                info->magic = ESP_MAGIC;
                info->close_delay = 5*HZ/10;
                info->closing_wait = 30*HZ;
@@ -2436,13 +2436,13 @@ static int __init espserial_init(void)
                info->config.flow_off = flow_off;
                info->config.pio_threshold = pio_threshold;
                info->next_port = ports;
-               init_waitqueue_head(&info->open_wait);
-               init_waitqueue_head(&info->close_wait);
+               init_waitqueue_head(&info->port.open_wait);
+               init_waitqueue_head(&info->port.close_wait);
                init_waitqueue_head(&info->delta_msr_wait);
                init_waitqueue_head(&info->break_wait);
                ports = info;
                printk(KERN_INFO "ttyP%d at 0x%04x (irq = %d) is an ESP ",
-                       info->line, info->port, info->irq);
+                       info->line, info->io_port, info->irq);
 
                if (info->line % 8) {
                        printk("secondary port\n");
@@ -2498,8 +2498,8 @@ static void __exit espserial_exit(void)
        put_tty_driver(esp_driver);
 
        while (ports) {
-               if (ports->port)
-                       release_region(ports->port, REGION_SIZE);
+               if (ports->io_port)
+                       release_region(ports->io_port, REGION_SIZE);
                temp_async = ports->next_port;
                kfree(ports);
                ports = temp_async;

diff --git a/include/linux/hayesesp.h b/include/linux/hayesesp.h
index 2177ee5..940aeb5 100644 (file)
--- a/include/linux/hayesesp.h
+++ b/include/linux/hayesesp.h
@@ -76,11 +76,10 @@ struct hayes_esp_config {
 
 struct esp_struct {
        int                     magic;
+       struct tty_port         port;
        spinlock_t              lock;
-       int                     port;
+       int                     io_port;
        int                     irq;
-       int                     flags;          /* defined in tty.h */
-       struct tty_struct       *tty;
        int                     read_status_mask;
        int                     ignore_status_mask;
        int                     timeout;
@@ -93,14 +92,10 @@ struct esp_struct {
        int                     MCR;    /* Modem control register */
        unsigned long           last_active;
        int                     line;
-       int                     count;      /* # of fd on device */
-       int                     blocked_open; /* # of blocked opens */
        unsigned char           *xmit_buf;
        int                     xmit_head;
        int                     xmit_tail;
        int                     xmit_cnt;
-       wait_queue_head_t       open_wait;
-       wait_queue_head_t       close_wait;
        wait_queue_head_t       delta_msr_wait;
        wait_queue_head_t       break_wait;
        struct async_icount     icount; /* kernel counters for the 4 input interrupts */