This involves changes to shared test files used by ExtUtils::MakeMaker and ExtUtils::Install, in particular updating the core/MakeMaker version of ExtUtils/t/basic.t so that it reflects the 1.50_03 version, and then splitting it in half into basic.pl and basic_finish.pl, which are then evalled (together) by basic.t. ExtUtils::Install does somethign similar but only with basic.pl.
This also silences an odd warning from MM_Any.pm that comes up once in a while, which I believe is to do with a deeper core failure as it occurs in code utterly unrelated to these changes.
This patch needs to be pushed upstream to the ExtUtils::MakeMaker distribution on CPAN under Schwern's supervision.
In this way it will be possible to simply copy the t/basic.pl from core into ExtUtils::Install or into ExtUtils::MakeMaker or whatever.
Includes the following changes from ExtUtils::Install:
1.50_04
SVN revision 41.
Restructure tests to make it easier to maintain given it is distributed in various
ways in three different packages.
1.50_03
SVN revision 40.
Sigh, just after i released 1.50_02 I noticed that a test modified in it will fail
under VMS. So this is a fixup release for that alone.
1.50_02
SVN revision 39.
Synchronize with the changes that were made in blead perl
patch #33567. VMS changes by Craig Berry. See
http://public.activestate.com/cgi-bin/perlbrowse/p/33567
This was marked in the pod as 1.51 but not actually version bumped.
So I've marked it as 1.50_02 as a test release prior to putting it out
as the real 1.51
This release also restores the missing installed.t which was accidentally
missed by the MANIFEST having a duplicate entry for install.t instead.
Probably something should have warned about this, but I haven't worked out
what.
Includes changes from Activestate/ActivePerl:
- To make installation less chatty when not under verbose mode. See
http://rt.cpan.org/Public/Bug/Display.html?id=5903
- To install HTML documentation files under builds that set $Config{installhtmldir}
(and presumably also create HTML versions of the pod -- which is quite nice actually :-)
http://rt.cpan.org/Ticket/Display.html?id=37727
p4raw-id: //depot/perl@34742
lib/ExtUtils/README MakeMaker README
lib/ExtUtils/t/00compile.t See if MakeMaker modules compile
lib/ExtUtils/t/backwards.t Check MakeMaker's backwards compatibility
-lib/ExtUtils/t/basic.t See if MakeMaker can build a module
+lib/ExtUtils/t/basic.t See if MakeMaker can build a module (wrapper for basic.pl and basic_finish.pl)
+lib/ExtUtils/t/basic.pl See if MakeMaker can build a module (part 1)
+lib/ExtUtils/t/basic_finish.pl See if MakeMaker can build a module (part 2)
lib/ExtUtils/t/build_man.t Set if MakeMaker builds manpages
lib/ExtUtils/t/bytes.t Test ExtUtils::MakeMaker::bytes
lib/ExtUtils/t/can_write_dir.t Does the _can_write_dir function of ExtUtils::Install work properly?
=head1 VERSION
-1.51
+1.50_04
=cut
-$VERSION = '1.50_01';
+$VERSION = '1.50_04';
$VERSION = eval $VERSION;
=pod
if ($pack{'write'}) {
$dir = install_rooted_dir(dirname($pack{'write'}));
_mkpath( $dir, 0, 0755, $verbose, $dry_run );
- print "Writing $pack{'write'}\n";
+ print "Writing $pack{'write'}\n" if $verbose;
$packlist->write(install_rooted_file($pack{'write'})) unless $dry_run;
}
my $INST_SCRIPT = File::Spec->catdir($Curdir,'blib','script');
my $INST_MAN1DIR = File::Spec->catdir($Curdir,'blib','man1');
my $INST_MAN3DIR = File::Spec->catdir($Curdir,'blib','man3');
+
+ my @INST_HTML;
+ if($Config{installhtmldir}) {
+ my $INST_HTMLDIR = File::Spec->catdir($Curdir,'blib','html');
+ @INST_HTML = ($INST_HTMLDIR => $Config{installhtmldir});
+ }
+
install({
read => "$Config{sitearchexp}/auto/$FULLEXT/.packlist",
write => "$Config{installsitearch}/auto/$FULLEXT/.packlist",
$INST_SCRIPT => $Config{installscript},
$INST_MAN1DIR => $Config{installman1dir},
$INST_MAN3DIR => $Config{installman3dir},
+ @INST_HTML,
},1,0,0);
}
package ExtUtils::MM_Any;
use strict;
-our $VERSION = '6.48';
+our $VERSION = '6.48_01';
use Carp;
use File::Spec;
sub make {
my $self = shift;
- my $make = lc $self->{MAKE};
+ my $make = lc($self->{MAKE}|| '');
# Truncate anything like foomake6 to just foomake.
$make =~ s/^(\w+make).*/$1/;
my $make = make_run();
run("$make"); # this is necessary due to a dmake bug.
-my $install_out = run("$make install");
-is( $?, 0, ' make install exited normally' ) || diag $install_out;
+# Test 'make install VERBINST=1'
+my $make_install_verbinst = make_macro($make, 'install', VERBINST => 1);
+my $install_out = run($make_install_verbinst);
+is( $?, 0, 'install' ) || diag $install_out;
like( $install_out, qr/^Installing /m );
like( $install_out, qr/^Writing /m );
--- /dev/null
+#!/usr/bin/perl -w
+
+# *NOTE* This is executed by basic.t and is included in both ExtUtils-Install
+# and ExtUtils-MakeMaker as well as Perl itself. Which bits of it execute depend
+# on each given packages basic.t
+
+# This test puts MakeMaker through the paces of a basic perl module
+# build, test and installation of the Big::Fat::Dummy module.
+
+use strict;
+use Config;
+use ExtUtils::MakeMaker;
+
+use Test::More tests => $::TESTS;
+use MakeMaker::Test::Utils;
+use MakeMaker::Test::Setup::BFD;
+use File::Find;
+use File::Spec;
+use File::Path;
+
+# 'make disttest' sets a bunch of environment variables which interfere
+# with our testing.
+delete @ENV{qw(PREFIX LIB MAKEFLAGS)};
+
+my $perl = which_perl();
+my $Is_VMS = $^O eq 'VMS';
+
+# GNV logical interferes with testing
+$ENV{'bin'} = '[.bin]' if $Is_VMS;
+
+chdir 't';
+
+perl_lib;
+
+my $Touch_Time = calibrate_mtime();
+
+$| = 1;
+
+ok( setup_recurs(), 'setup' );
+END {
+ ok( chdir File::Spec->updir );
+ ok( teardown_recurs(), 'teardown' );
+}
+
+ok( chdir('Big-Dummy'), "chdir'd to Big-Dummy" ) ||
+ diag("chdir failed: $!");
+
+my @mpl_out = run(qq{$perl Makefile.PL "PREFIX=../dummy-install"});
+END { rmtree '../dummy-install'; }
+
+cmp_ok( $?, '==', 0, 'Makefile.PL exited with zero' ) ||
+ diag(@mpl_out);
+
+my $makefile = makefile_name();
+ok( grep(/^Writing $makefile for Big::Dummy/,
+ @mpl_out) == 1,
+ 'Makefile.PL output looks right');
+
+ok( grep(/^Current package is: main$/,
+ @mpl_out) == 1,
+ 'Makefile.PL run in package main');
+
+ok( -e $makefile, 'Makefile exists' );
+
+# -M is flakey on VMS
+my $mtime = (stat($makefile))[9];
+cmp_ok( $Touch_Time, '<=', $mtime, ' its been touched' );
+
+END { unlink makefile_name(), makefile_backup() }
+
+my $make = make_run();
+
+{
+ # Supress 'make manifest' noise
+ local $ENV{PERL_MM_MANIFEST_VERBOSE} = 0;
+ my $manifest_out = run("$make manifest");
+ ok( -e 'MANIFEST', 'make manifest created a MANIFEST' );
+ ok( -s 'MANIFEST', ' its not empty' );
+}
+
+END { unlink 'MANIFEST'; }
+
+unless ($::TEST_INSTALL_ONLY) {
+ my $ppd_out = run("$make ppd");
+ is( $?, 0, ' exited normally' ) || diag $ppd_out;
+ ok( open(PPD, 'Big-Dummy.ppd'), ' .ppd file generated' );
+ my $ppd_html;
+ { local $/; $ppd_html = <PPD> }
+ close PPD;
+ like( $ppd_html, qr{^<SOFTPKG NAME="Big-Dummy" VERSION="0,01,0,0">}m,
+ ' <SOFTPKG>' );
+ like( $ppd_html, qr{^\s*<TITLE>Big-Dummy</TITLE>}m, ' <TITLE>' );
+ like( $ppd_html, qr{^\s*<ABSTRACT>Try "our" hot dog's</ABSTRACT>}m, # Unconfuse highlighters: '
+ ' <ABSTRACT>');
+ like( $ppd_html,
+ qr{^\s*<AUTHOR>Michael G Schwern <schwern\@pobox.com></AUTHOR>}m,
+ ' <AUTHOR>' );
+ like( $ppd_html, qr{^\s*<IMPLEMENTATION>}m, ' <IMPLEMENTATION>');
+ like( $ppd_html, qr{^\s*<DEPENDENCY NAME="strict" VERSION="0,0,0,0" />}m,
+ ' <DEPENDENCY>' );
+ like( $ppd_html, qr{^\s*<OS NAME="$Config{osname}" />}m,
+ ' <OS>' );
+ my $archname = $Config{archname};
+ $archname .= "-". substr($Config{version},0,3) if $] >= 5.008;
+ like( $ppd_html, qr{^\s*<ARCHITECTURE NAME="$archname" />}m,
+ ' <ARCHITECTURE>');
+ like( $ppd_html, qr{^\s*<CODEBASE HREF="" />}m, ' <CODEBASE>');
+ like( $ppd_html, qr{^\s*</IMPLEMENTATION>}m, ' </IMPLEMENTATION>');
+ like( $ppd_html, qr{^\s*</SOFTPKG>}m, ' </SOFTPKG>');
+ END { unlink 'Big-Dummy.ppd' }
+}
+
+my $test_out = run("$make test");
+like( $test_out, qr/All tests successful/, 'make test' );
+is( $?, 0, ' exited normally' ) ||
+ diag $test_out;
+
+# Test 'make test TEST_VERBOSE=1'
+my $make_test_verbose = make_macro($make, 'test', TEST_VERBOSE => 1);
+$test_out = run("$make_test_verbose");
+like( $test_out, qr/ok \d+ - TEST_VERBOSE/, 'TEST_VERBOSE' );
+like( $test_out, qr/All tests successful/, ' successful' );
+is( $?, 0, ' exited normally' ) ||
+ diag $test_out;
+
+# Test 'make install VERBINST=1'
+my $make_install_verbinst = make_macro($make, 'install', VERBINST => 1);
+my $install_out = run($make_install_verbinst);
+is( $?, 0, 'install' ) || diag $install_out;
+like( $install_out, qr/^Installing /m );
+like( $install_out, qr/^Writing /m );
+
+ok( -r '../dummy-install', ' install dir created' );
+my %files = ();
+find( sub {
+ # do it case-insensitive for non-case preserving OSs
+ my $file = lc $_;
+
+ # VMS likes to put dots on the end of things that don't have them.
+ $file =~ s/\.$// if $Is_VMS;
+
+ $files{$file} = $File::Find::name;
+}, '../dummy-install' );
+ok( $files{'dummy.pm'}, ' Dummy.pm installed' );
+ok( $files{'liar.pm'}, ' Liar.pm installed' );
+ok( $files{'program'}, ' program installed' );
+ok( $files{'.packlist'}, ' packlist created' );
+ok( $files{'perllocal.pod'},' perllocal.pod created' );
+
+
+SKIP: {
+ skip 'VMS install targets do not preserve $(PREFIX)', 9 if $Is_VMS;
+
+ $install_out = run("$make install PREFIX=elsewhere VERBINST=1");
+ is( $?, 0, 'install with PREFIX override' ) || diag $install_out;
+ like( $install_out, qr/^Installing /m );
+ like( $install_out, qr/^Writing /m );
+
+ ok( -r 'elsewhere', ' install dir created' );
+ %files = ();
+ find( sub { $files{$_} = $File::Find::name; }, 'elsewhere' );
+ ok( $files{'Dummy.pm'}, ' Dummy.pm installed' );
+ ok( $files{'Liar.pm'}, ' Liar.pm installed' );
+ ok( $files{'program'}, ' program installed' );
+ ok( $files{'.packlist'}, ' packlist created' );
+ ok( $files{'perllocal.pod'},' perllocal.pod created' );
+ rmtree('elsewhere');
+}
+
+
+SKIP: {
+ skip 'VMS install targets do not preserve $(DESTDIR)', 11 if $Is_VMS;
+
+ $install_out = run("$make install PREFIX= DESTDIR=other VERBINST=1");
+ is( $?, 0, 'install with DESTDIR' ) ||
+ diag $install_out;
+ like( $install_out, qr/^Installing /m );
+ like( $install_out, qr/^Writing /m );
+
+ ok( -d 'other', ' destdir created' );
+ %files = ();
+ my $perllocal;
+ find( sub {
+ $files{$_} = $File::Find::name;
+ }, 'other' );
+ ok( $files{'Dummy.pm'}, ' Dummy.pm installed' );
+ ok( $files{'Liar.pm'}, ' Liar.pm installed' );
+ ok( $files{'program'}, ' program installed' );
+ ok( $files{'.packlist'}, ' packlist created' );
+ ok( $files{'perllocal.pod'},' perllocal.pod created' );
+
+ ok( open(PERLLOCAL, $files{'perllocal.pod'} ) ) ||
+ diag("Can't open $files{'perllocal.pod'}: $!");
+ { local $/;
+ unlike(<PERLLOCAL>, qr/other/, 'DESTDIR should not appear in perllocal');
+ }
+ close PERLLOCAL;
+
+# TODO not available in the min version of Test::Harness we require
+# ok( open(PACKLIST, $files{'.packlist'} ) ) ||
+# diag("Can't open $files{'.packlist'}: $!");
+# { local $/;
+# local $TODO = 'DESTDIR still in .packlist';
+# unlike(<PACKLIST>, qr/other/, 'DESTDIR should not appear in .packlist');
+# }
+# close PACKLIST;
+
+ rmtree('other');
+}
+
+
+SKIP: {
+ skip 'VMS install targets do not preserve $(PREFIX)', 10 if $Is_VMS;
+
+ $install_out = run("$make install PREFIX=elsewhere DESTDIR=other/ VERBINST=1");
+ is( $?, 0, 'install with PREFIX override and DESTDIR' ) ||
+ diag $install_out;
+ like( $install_out, qr/^Installing /m );
+ like( $install_out, qr/^Writing /m );
+
+ ok( !-d 'elsewhere', ' install dir not created' );
+ ok( -d 'other/elsewhere', ' destdir created' );
+ %files = ();
+ find( sub { $files{$_} = $File::Find::name; }, 'other/elsewhere' );
+ ok( $files{'Dummy.pm'}, ' Dummy.pm installed' );
+ ok( $files{'Liar.pm'}, ' Liar.pm installed' );
+ ok( $files{'program'}, ' program installed' );
+ ok( $files{'.packlist'}, ' packlist created' );
+ ok( $files{'perllocal.pod'},' perllocal.pod created' );
+ rmtree('other');
+}
}
}
-use strict;
-use Config;
-use ExtUtils::MakeMaker;
+# The test logic is shared between MakeMaker and Install
+# because in MakeMaker we test aspects that we are uninterested
+# in with Install.pm, however MakeMaker needs to know if it
+# accidentally breaks Install. So we have this two stage test file
+# thing happening.
+
+# This version is distinct to MakeMaker and the core.
+
+use vars qw/$TESTS $TEST_INSTALL_ONLY/;
+use Cwd qw(cwd);
+
+$::TESTS= 55 + 30;
+$::TEST_INSTALL_ONLY= 0;
+
+(my $start=$0)=~s/\.t$/.pl/;
+(my $finish=$start)=~s/\.pl$/_finish.pl/;
+my $code;
+for my $file ($start,$finish) {
+ open my $fh,$file or die "Failed to read: $file";
+ $code .= do {
+ local $/;
+ <$fh>;
+ };
+ close $fh;
+ $code .= "\n;\n";
+}
+eval $code or die $@,$code;
-use Test::More tests => 85;
-use MakeMaker::Test::Utils;
-use MakeMaker::Test::Setup::BFD;
-use File::Find;
-use File::Spec;
-use File::Path;
-
-# 'make disttest' sets a bunch of environment variables which interfere
-# with our testing.
-delete @ENV{qw(PREFIX LIB MAKEFLAGS)};
-
-my $perl = which_perl();
-my $Is_VMS = $^O eq 'VMS';
-
-# GNV logical interferes with testing
-$ENV{'bin'} = '[.bin]' if $Is_VMS;
-
-chdir 't';
-
-perl_lib;
-
-my $Touch_Time = calibrate_mtime();
-
-$| = 1;
-
-ok( setup_recurs(), 'setup' );
-END {
- ok( chdir File::Spec->updir );
- ok( teardown_recurs(), 'teardown' );
-}
-
-ok( chdir('Big-Dummy'), "chdir'd to Big-Dummy" ) ||
- diag("chdir failed: $!");
-
-my @mpl_out = run(qq{$perl Makefile.PL "PREFIX=../dummy-install"});
-END { rmtree '../dummy-install'; }
-
-cmp_ok( $?, '==', 0, 'Makefile.PL exited with zero' ) ||
- diag(@mpl_out);
-
-my $makefile = makefile_name();
-ok( grep(/^Writing $makefile for Big::Dummy/,
- @mpl_out) == 1,
- 'Makefile.PL output looks right');
-
-ok( grep(/^Current package is: main$/,
- @mpl_out) == 1,
- 'Makefile.PL run in package main');
-
-ok( -e $makefile, 'Makefile exists' );
-
-# -M is flakey on VMS
-my $mtime = (stat($makefile))[9];
-cmp_ok( $Touch_Time, '<=', $mtime, ' its been touched' );
-
-END { unlink makefile_name(), makefile_backup() }
-
-my $make = make_run();
-
-{
- # Supress 'make manifest' noise
- local $ENV{PERL_MM_MANIFEST_VERBOSE} = 0;
- my $manifest_out = run("$make manifest");
- ok( -e 'MANIFEST', 'make manifest created a MANIFEST' );
- ok( -s 'MANIFEST', ' its not empty' );
-}
-
-END { unlink 'MANIFEST'; }
-
-
-my $ppd_out = run("$make ppd");
-is( $?, 0, ' exited normally' ) || diag $ppd_out;
-ok( open(PPD, 'Big-Dummy.ppd'), ' .ppd file generated' );
-my $ppd_html;
-{ local $/; $ppd_html = <PPD> }
-close PPD;
-like( $ppd_html, qr{^<SOFTPKG NAME="Big-Dummy" VERSION="0,01,0,0">}m,
- ' <SOFTPKG>' );
-like( $ppd_html, qr{^\s*<TITLE>Big-Dummy</TITLE>}m, ' <TITLE>' );
-like( $ppd_html, qr{^\s*<ABSTRACT>Try "our" hot dog's</ABSTRACT>}m,
- ' <ABSTRACT>');
-like( $ppd_html,
- qr{^\s*<AUTHOR>Michael G Schwern <schwern\@pobox.com></AUTHOR>}m,
- ' <AUTHOR>' );
-like( $ppd_html, qr{^\s*<IMPLEMENTATION>}m, ' <IMPLEMENTATION>');
-like( $ppd_html, qr{^\s*<DEPENDENCY NAME="strict" VERSION="0,0,0,0" />}m,
- ' <DEPENDENCY>' );
-like( $ppd_html, qr{^\s*<OS NAME="$Config{osname}" />}m,
- ' <OS>' );
-my $archname = $Config{archname};
-$archname .= "-". substr($Config{version},0,3) if $] >= 5.008;
-like( $ppd_html, qr{^\s*<ARCHITECTURE NAME="$archname" />}m,
- ' <ARCHITECTURE>');
-like( $ppd_html, qr{^\s*<CODEBASE HREF="" />}m, ' <CODEBASE>');
-like( $ppd_html, qr{^\s*</IMPLEMENTATION>}m, ' </IMPLEMENTATION>');
-like( $ppd_html, qr{^\s*</SOFTPKG>}m, ' </SOFTPKG>');
-END { unlink 'Big-Dummy.ppd' }
-
-
-my $test_out = run("$make test");
-like( $test_out, qr/All tests successful/, 'make test' );
-is( $?, 0, ' exited normally' ) ||
- diag $test_out;
-
-# Test 'make test TEST_VERBOSE=1'
-my $make_test_verbose = make_macro($make, 'test', TEST_VERBOSE => 1);
-$test_out = run("$make_test_verbose");
-like( $test_out, qr/ok \d+ - TEST_VERBOSE/, 'TEST_VERBOSE' );
-like( $test_out, qr/All tests successful/, ' successful' );
-is( $?, 0, ' exited normally' ) ||
- diag $test_out;
-
-
-my $install_out = run("$make install");
-is( $?, 0, 'install' ) || diag $install_out;
-like( $install_out, qr/^Installing /m );
-like( $install_out, qr/^Writing /m );
-
-ok( -r '../dummy-install', ' install dir created' );
-my %files = ();
-find( sub {
- # do it case-insensitive for non-case preserving OSs
- my $file = lc $_;
-
- # VMS likes to put dots on the end of things that don't have them.
- $file =~ s/\.$// if $Is_VMS;
-
- $files{$file} = $File::Find::name;
-}, '../dummy-install' );
-ok( $files{'dummy.pm'}, ' Dummy.pm installed' );
-ok( $files{'liar.pm'}, ' Liar.pm installed' );
-ok( $files{'program'}, ' program installed' );
-ok( $files{'.packlist'}, ' packlist created' );
-ok( $files{'perllocal.pod'},' perllocal.pod created' );
-
-
-SKIP: {
- skip 'VMS install targets do not preserve $(PREFIX)', 9 if $Is_VMS;
-
- $install_out = run("$make install PREFIX=elsewhere");
- is( $?, 0, 'install with PREFIX override' ) || diag $install_out;
- like( $install_out, qr/^Installing /m );
- like( $install_out, qr/^Writing /m );
-
- ok( -r 'elsewhere', ' install dir created' );
- %files = ();
- find( sub { $files{$_} = $File::Find::name; }, 'elsewhere' );
- ok( $files{'Dummy.pm'}, ' Dummy.pm installed' );
- ok( $files{'Liar.pm'}, ' Liar.pm installed' );
- ok( $files{'program'}, ' program installed' );
- ok( $files{'.packlist'}, ' packlist created' );
- ok( $files{'perllocal.pod'},' perllocal.pod created' );
- rmtree('elsewhere');
-}
-
-
-SKIP: {
- skip 'VMS install targets do not preserve $(DESTDIR)', 11 if $Is_VMS;
-
- $install_out = run("$make install PREFIX= DESTDIR=other");
- is( $?, 0, 'install with DESTDIR' ) ||
- diag $install_out;
- like( $install_out, qr/^Installing /m );
- like( $install_out, qr/^Writing /m );
-
- ok( -d 'other', ' destdir created' );
- %files = ();
- my $perllocal;
- find( sub {
- $files{$_} = $File::Find::name;
- }, 'other' );
- ok( $files{'Dummy.pm'}, ' Dummy.pm installed' );
- ok( $files{'Liar.pm'}, ' Liar.pm installed' );
- ok( $files{'program'}, ' program installed' );
- ok( $files{'.packlist'}, ' packlist created' );
- ok( $files{'perllocal.pod'},' perllocal.pod created' );
-
- ok( open(PERLLOCAL, $files{'perllocal.pod'} ) ) ||
- diag("Can't open $files{'perllocal.pod'}: $!");
- { local $/;
- unlike(<PERLLOCAL>, qr/other/, 'DESTDIR should not appear in perllocal');
- }
- close PERLLOCAL;
-
-# TODO not available in the min version of Test::Harness we require
-# ok( open(PACKLIST, $files{'.packlist'} ) ) ||
-# diag("Can't open $files{'.packlist'}: $!");
-# { local $/;
-# local $TODO = 'DESTDIR still in .packlist';
-# unlike(<PACKLIST>, qr/other/, 'DESTDIR should not appear in .packlist');
-# }
-# close PACKLIST;
-
- rmtree('other');
-}
-
-
-SKIP: {
- skip 'VMS install targets do not preserve $(PREFIX)', 10 if $Is_VMS;
-
- $install_out = run("$make install PREFIX=elsewhere DESTDIR=other/");
- is( $?, 0, 'install with PREFIX override and DESTDIR' ) ||
- diag $install_out;
- like( $install_out, qr/^Installing /m );
- like( $install_out, qr/^Writing /m );
-
- ok( !-d 'elsewhere', ' install dir not created' );
- ok( -d 'other/elsewhere', ' destdir created' );
- %files = ();
- find( sub { $files{$_} = $File::Find::name; }, 'other/elsewhere' );
- ok( $files{'Dummy.pm'}, ' Dummy.pm installed' );
- ok( $files{'Liar.pm'}, ' Liar.pm installed' );
- ok( $files{'program'}, ' program installed' );
- ok( $files{'.packlist'}, ' packlist created' );
- ok( $files{'perllocal.pod'},' perllocal.pod created' );
- rmtree('other');
-}
-
-
-my $dist_test_out = run("$make disttest");
-is( $?, 0, 'disttest' ) || diag($dist_test_out);
-
-# Test META.yml generation
-use ExtUtils::Manifest qw(maniread);
-
-my $distdir = 'Big-Dummy-0.01';
-$distdir =~ s/\./_/g if $Is_VMS;
-my $meta_yml = "$distdir/META.yml";
-
-ok( !-f 'META.yml', 'META.yml not written to source dir' );
-ok( -f $meta_yml, 'META.yml written to dist dir' );
-ok( !-e "META_new.yml", 'temp META.yml file not left around' );
-
-SKIP: {
- # META.yml spec 1.4 was added in 0.11
- skip "Test::YAML::Meta >= 0.11 required", 2
- unless eval { require Test::YAML::Meta } and
- Test::YAML::Meta->VERSION >= 0.11;
-
- Test::YAML::Meta::meta_spec_ok($meta_yml);
-}
-
-ok open META, $meta_yml or diag $!;
-my $meta = join '', <META>;
-ok close META;
-
-is $meta, <<"END";
---- #YAML:1.0
-name: Big-Dummy
-version: 0.01
-abstract: Try "our" hot dog's
-author:
- - Michael G Schwern <schwern\@pobox.com>
-license: unknown
-distribution_type: module
-configure_requires:
- ExtUtils::MakeMaker: 0
-requires:
- strict: 0
-no_index:
- directory:
- - t
- - inc
-generated_by: ExtUtils::MakeMaker version $ExtUtils::MakeMaker::VERSION
-meta-spec:
- url: http://module-build.sourceforge.net/META-spec-v1.4.html
- version: 1.4
-END
-
-my $manifest = maniread("$distdir/MANIFEST");
-# VMS is non-case preserving, so we can't know what the MANIFEST will
-# look like. :(
-_normalize($manifest);
-is( $manifest->{'meta.yml'}, 'Module meta-data (added by MakeMaker)' );
-
-
-# Test NO_META META.yml suppression
-unlink $meta_yml;
-ok( !-f $meta_yml, 'META.yml deleted' );
-@mpl_out = run(qq{$perl Makefile.PL "NO_META=1"});
-cmp_ok( $?, '==', 0, 'Makefile.PL exited with zero' ) || diag(@mpl_out);
-my $distdir_out = run("$make distdir");
-is( $?, 0, 'distdir' ) || diag($distdir_out);
-ok( !-f $meta_yml, 'META.yml generation suppressed by NO_META' );
-
-
-# Make sure init_dirscan doesn't go into the distdir
-@mpl_out = run(qq{$perl Makefile.PL "PREFIX=../dummy-install"});
-
-cmp_ok( $?, '==', 0, 'Makefile.PL exited with zero' ) || diag(@mpl_out);
-
-ok( grep(/^Writing $makefile for Big::Dummy/, @mpl_out) == 1,
- 'init_dirscan skipped distdir') ||
- diag(@mpl_out);
-
-# I know we'll get ignored errors from make here, that's ok.
-# Send STDERR off to oblivion.
-open(SAVERR, ">&STDERR") or die $!;
-open(STDERR, ">".File::Spec->devnull) or die $!;
-
-my $realclean_out = run("$make realclean");
-is( $?, 0, 'realclean' ) || diag($realclean_out);
-
-open(STDERR, ">&SAVERR") or die $!;
-close SAVERR;
-
-
-sub _normalize {
- my $hash = shift;
-
- while(my($k,$v) = each %$hash) {
- delete $hash->{$k};
- $hash->{lc $k} = $v;
- }
-}
--- /dev/null
+# *NOTE* This is executed by basic.t and is included in both ExtUtils-MakeMaker
+# as well as Perlcore. Note also that it is expected to be executed in a do "FILE"
+# immediately after basic.plt is executed (similarly).
+
+# It is NOT expected to be executed under ExtUtils-Install alone, and in fact is not
+# distributed there, however it is expected to be executed under ExtUtils-MakeMaker
+# and Perl itself.
+
+my $dist_test_out = run("$make disttest");
+is( $?, 0, 'disttest' ) || diag($dist_test_out);
+
+# Test META.yml generation
+use ExtUtils::Manifest qw(maniread);
+
+my $distdir = 'Big-Dummy-0.01';
+$distdir =~ s/\./_/g if $Is_VMS;
+my $meta_yml = "$distdir/META.yml";
+
+ok( !-f 'META.yml', 'META.yml not written to source dir' );
+ok( -f $meta_yml, 'META.yml written to dist dir' );
+ok( !-e "META_new.yml", 'temp META.yml file not left around' );
+
+SKIP: {
+ # META.yml spec 1.4 was added in 0.11
+ skip "Test::YAML::Meta >= 0.11 required", 2
+ unless eval { require Test::YAML::Meta } and
+ Test::YAML::Meta->VERSION >= 0.11;
+
+ Test::YAML::Meta::meta_spec_ok($meta_yml);
+}
+
+ok open META, $meta_yml or diag $!;
+my $meta = join '', <META>;
+ok close META;
+
+is $meta, <<"END";
+--- #YAML:1.0
+name: Big-Dummy
+version: 0.01
+abstract: Try "our" hot dog's
+author:
+ - Michael G Schwern <schwern\@pobox.com>
+license: unknown
+distribution_type: module
+configure_requires:
+ ExtUtils::MakeMaker: 0
+requires:
+ strict: 0
+no_index:
+ directory:
+ - t
+ - inc
+generated_by: ExtUtils::MakeMaker version $ExtUtils::MakeMaker::VERSION
+meta-spec:
+ url: http://module-build.sourceforge.net/META-spec-v1.4.html
+ version: 1.4
+END
+
+my $manifest = maniread("$distdir/MANIFEST");
+# VMS is non-case preserving, so we can't know what the MANIFEST will
+# look like. :(
+_normalize($manifest);
+is( $manifest->{'meta.yml'}, 'Module meta-data (added by MakeMaker)' );
+
+
+# Test NO_META META.yml suppression
+unlink $meta_yml;
+ok( !-f $meta_yml, 'META.yml deleted' );
+@mpl_out = run(qq{$perl Makefile.PL "NO_META=1"});
+cmp_ok( $?, '==', 0, 'Makefile.PL exited with zero' ) || diag(@mpl_out);
+my $distdir_out = run("$make distdir");
+is( $?, 0, 'distdir' ) || diag($distdir_out);
+ok( !-f $meta_yml, 'META.yml generation suppressed by NO_META' );
+
+
+# Make sure init_dirscan doesn't go into the distdir
+@mpl_out = run(qq{$perl Makefile.PL "PREFIX=../dummy-install"});
+
+cmp_ok( $?, '==', 0, 'Makefile.PL exited with zero' ) || diag(@mpl_out);
+
+ok( grep(/^Writing $makefile for Big::Dummy/, @mpl_out) == 1,
+ 'init_dirscan skipped distdir') ||
+ diag(@mpl_out);
+
+# I know we'll get ignored errors from make here, that's ok.
+# Send STDERR off to oblivion.
+open(SAVERR, ">&STDERR") or die $!;
+open(STDERR, ">".File::Spec->devnull) or die $!;
+
+my $realclean_out = run("$make realclean");
+is( $?, 0, 'realclean' ) || diag($realclean_out);
+
+open(STDERR, ">&SAVERR") or die $!;
+close SAVERR;
+
+
+sub _normalize {
+ my $hash = shift;
+
+ while(my($k,$v) = each %$hash) {
+ delete $hash->{$k};
+ $hash->{lc $k} = $v;
+ }
+}
projects / platform / upstream / perl.git / commitdiff