};
&gpio6 {
- usb_hub_reset {
+ usb-hub-reset-hog {
gpio-hog;
gpios = <10 GPIO_ACTIVE_HIGH>;
output-high;
};
&gpio6 {
- usb1-reset {
+ usb1-reset-hog {
gpio-hog;
gpios = <10 GPIO_ACTIVE_LOW>;
output-low;
* When GP1_20 is LOW LVDS0 is connected to the LVDS connector
* When GP1_20 is HIGH LVDS0 is connected to the LT8918L
*/
- lvds-connector-en-gpio {
+ lvds-connector-en-hog {
gpio-hog;
gpios = <20 GPIO_ACTIVE_HIGH>;
output-low;
* When GP0_17 is low LVDS[01] are connected to the LVDS connector
* When GP0_17 is high LVDS[01] are connected to the LT8918L
*/
- lvds-connector-en-gpio{
+ lvds-connector-en-hog {
gpio-hog;
gpios = <17 GPIO_ACTIVE_HIGH>;
output-low;
};
&pinctrl {
- /delete-node/ can0-stb;
- /delete-node/ can1-stb;
+ /delete-node/ can0-stb-hog;
+ /delete-node/ can1-stb-hog;
/delete-node/ gpio-sd0-pwr-en-hog;
/delete-node/ sd0-dev-sel-hog;
/delete-node/ sd1-pwr-en-hog;
};
/* SW7 should be at position 2->3 so that GPIO8_CAN0_STB line is activated */
- can0-stb {
+ can0-stb-hog {
gpio-hog;
gpios = <RZG2L_GPIO(42, 2) GPIO_ACTIVE_HIGH>;
output-low;
};
/* SW8 should be at position 2->3 so that GPIO9_CAN1_STB line is activated */
- can1-stb {
+ can1-stb-hog {
gpio-hog;
gpios = <RZG2L_GPIO(42, 3) GPIO_ACTIVE_HIGH>;
output-low;
#if SW_RSPI_CAN
/* SW8 should be at position 2->3 so that GPIO9_CAN1_STB line is activated */
- can1-stb {
+ can1-stb-hog {
gpio-hog;
gpios = <RZG2L_GPIO(44, 3) GPIO_ACTIVE_HIGH>;
output-low;