staging: comedi: addi-data: remove the board attach noise

Remove all the kernel messages from i_ADDI_Attach(). These are just
additional boot noise.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/comedi/drivers/addi-data/addi_common.c b/drivers/staging/comedi/drivers/addi-data/addi_common.c
index 0413a14..48a9001 100644 (file)
--- a/drivers/staging/comedi/drivers/addi-data/addi_common.c
+++ b/drivers/staging/comedi/drivers/addi-data/addi_common.c
@@ -125,7 +125,6 @@ static int i_ADDI_Attach(struct comedi_device *dev, struct comedi_devconfig *it)
        if ((i_pci_card_data(card, &pci_bus, &pci_slot, &pci_func, &io_addr[0],
                                &irq)) < 0) {
                i_pci_card_free(card);
-               printk(" - Can't get AMCC data!\n");
                return -EIO;
        }
 
@@ -133,7 +132,6 @@ static int i_ADDI_Attach(struct comedi_device *dev, struct comedi_devconfig *it)
        iobase_main = io_addr[1];
        iobase_addon = io_addr[2];
        iobase_reserved = io_addr[3];
-       printk("\nBus %d: Slot %d: Funct%d\nBase0: 0x%8llx\nBase1: 0x%8llx\nBase2: 0x%8llx\nBase3: 0x%8llx\n", pci_bus, pci_slot, pci_func, (unsigned long long)io_addr[0], (unsigned long long)io_addr[1], (unsigned long long)io_addr[2], (unsigned long long)io_addr[3]);
 
        if ((this_board->pc_EepromChip == NULL)
                || (strcmp(this_board->pc_EepromChip, ADDIDATA_9054) != 0)) {
@@ -159,10 +157,8 @@ static int i_ADDI_Attach(struct comedi_device *dev, struct comedi_devconfig *it)
                devpriv->amcc = card;
                devpriv->iobase = (int) io_addr[2];
                devpriv->i_IobaseReserved = (int) io_addr[3];
-               printk("\nioremap begin");
                devpriv->dw_AiBase = ioremap(io_addr[3],
                                             this_board->i_IorangeBase3);
-               printk("\nioremap end");
        }
 
        /* Initialize parameters that can be overridden in EEPROM */
@@ -185,24 +181,15 @@ static int i_ADDI_Attach(struct comedi_device *dev, struct comedi_devconfig *it)
        if (irq > 0) {
                if (request_irq(irq, v_ADDI_Interrupt, IRQF_SHARED,
                                this_board->pc_DriverName, dev) < 0) {
-                       printk(", unable to allocate IRQ %u, DISABLING IT",
-                               irq);
                        irq = 0;        /* Can't use IRQ */
-               } else {
-                       printk("\nirq=%u", irq);
                }
-       } else {
-               printk(", IRQ disabled");
        }
 
-       printk("\nOption %d %d %d\n", it->options[0], it->options[1],
-               it->options[2]);
        dev->irq = irq;
 
        /*  Read eepeom and fill addi_board Structure */
 
        if (this_board->i_PCIEeprom) {
-               printk("\nPCI Eeprom used");
                if (!(strcmp(this_board->pc_EepromChip, "S5920"))) {
                        /*  Set 3 wait stait */
                        if (!(strcmp(this_board->pc_DriverName, "apci035"))) {
@@ -213,12 +200,8 @@ static int i_ADDI_Attach(struct comedi_device *dev, struct comedi_devconfig *it)
                        /*  Enable the interrupt for the controller */
                        dw_Dummy = inl(devpriv->i_IobaseAmcc + 0x38);
                        outl(dw_Dummy | 0x2000, devpriv->i_IobaseAmcc + 0x38);
-                       printk("\nEnable the interrupt for the controller");
                }
-               printk("\nRead Eeprom");
                addi_eeprom_read_info(dev, io_addr[0]);
-       } else {
-               printk("\nPCI Eeprom unused");
        }
 
        if (it->options[2] > 0) {
@@ -228,7 +211,6 @@ static int i_ADDI_Attach(struct comedi_device *dev, struct comedi_devconfig *it)
        }
 
        if (devpriv->s_EeParameters.i_Dma) {
-               printk("\nDMA used");
                if (devpriv->us_UseDma == ADDI_ENABLE) {
                        /*  alloc DMA buffers */
                        devpriv->b_DmaDoubleBuffer = 0;
@@ -252,21 +234,11 @@ static int i_ADDI_Attach(struct comedi_device *dev, struct comedi_devconfig *it)
                                                ul_DmaBufferVirtual[i]);
                                }
                        }
-                       if (!devpriv->ul_DmaBufferVirtual[0]) {
-                               printk
-                                       (", Can't allocate DMA buffer, DMA disabled!");
+                       if (!devpriv->ul_DmaBufferVirtual[0])
                                devpriv->us_UseDma = ADDI_DISABLE;
-                       }
 
-                       if (devpriv->ul_DmaBufferVirtual[1]) {
+                       if (devpriv->ul_DmaBufferVirtual[1])
                                devpriv->b_DmaDoubleBuffer = 1;
-                       }
-               }
-
-               if ((devpriv->us_UseDma == ADDI_ENABLE)) {
-                       printk("\nDMA ENABLED\n");
-               } else {
-                       printk("\nDMA DISABLED\n");
                }
        }
 
@@ -424,7 +396,6 @@ static int i_ADDI_Attach(struct comedi_device *dev, struct comedi_devconfig *it)
                }
        }
 
-       printk("\ni_ADDI_Attach end\n");
        i_ADDI_Reset(dev);
        devpriv->b_ValidDriver = 1;
        return 0;