i2c: Allow i2c_add_numbered_adapter() to assign a bus id
authorGrant Likely <grant.likely@secretlab.ca>
Mon, 25 Jul 2011 15:49:43 +0000 (17:49 +0200)
committerJean Delvare <khali@endymion.delvare>
Mon, 25 Jul 2011 15:49:43 +0000 (17:49 +0200)
Currently, if an i2c bus driver supports both static and dynamic bus
ids, it needs to choose between calling i2c_add_numbered_adapter() and
i2c_add_adapter().  This patch makes i2c_add_numbered_adapter()
redirect to i2c_add_adapter() if the requested bus id is -1.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
drivers/i2c/busses/i2c-cpm.c
drivers/i2c/busses/i2c-pxa.c
drivers/i2c/busses/i2c-s6000.c
drivers/i2c/i2c-core.c

index 3a20961..b1d9cd2 100644 (file)
@@ -662,11 +662,8 @@ static int __devinit cpm_i2c_probe(struct platform_device *ofdev)
        /* register new adapter to i2c module... */
 
        data = of_get_property(ofdev->dev.of_node, "linux,i2c-index", &len);
-       if (data && len == 4) {
-               cpm->adap.nr = *data;
-               result = i2c_add_numbered_adapter(&cpm->adap);
-       } else
-               result = i2c_add_adapter(&cpm->adap);
+       cpm->adap.nr = (data && len == 4) ? be32_to_cpup(data) : -1;
+       result = i2c_add_numbered_adapter(&cpm->adap);
 
        if (result < 0) {
                dev_err(&ofdev->dev, "Unable to register with I2C\n");
index f59224a..d603646 100644 (file)
@@ -1079,7 +1079,7 @@ static int i2c_pxa_probe(struct platform_device *dev)
         * The reason to do so is to avoid sysfs names that only make
         * sense when there are multiple adapters.
         */
-       i2c->adap.nr = dev->id != -1 ? dev->id : 0;
+       i2c->adap.nr = dev->id;
        snprintf(i2c->adap.name, sizeof(i2c->adap.name), "pxa_i2c-i2c.%u",
                 i2c->adap.nr);
 
@@ -1142,10 +1142,7 @@ static int i2c_pxa_probe(struct platform_device *dev)
        i2c->adap.dev.of_node = dev->dev.of_node;
 #endif
 
-       if (i2c_type == REGS_CE4100)
-               ret = i2c_add_adapter(&i2c->adap);
-       else
-               ret = i2c_add_numbered_adapter(&i2c->adap);
+       ret = i2c_add_numbered_adapter(&i2c->adap);
        if (ret < 0) {
                printk(KERN_INFO "I2C: Failed to add bus\n");
                goto eadapt;
index cb5d01e..c64ba73 100644 (file)
@@ -341,10 +341,7 @@ static int __devinit s6i2c_probe(struct platform_device *dev)
        i2c_wr16(iface, S6_I2C_TXTL, 0);
 
        platform_set_drvdata(dev, iface);
-       if (bus_num < 0)
-               rc = i2c_add_adapter(p_adap);
-       else
-               rc = i2c_add_numbered_adapter(p_adap);
+       rc = i2c_add_numbered_adapter(p_adap);
        if (rc)
                goto err_irq_free;
        return 0;
index 9a58994..131079a 100644 (file)
@@ -925,6 +925,9 @@ EXPORT_SYMBOL(i2c_add_adapter);
  * or otherwise built in to the system's mainboard, and where i2c_board_info
  * is used to properly configure I2C devices.
  *
+ * If the requested bus number is set to -1, then this function will behave
+ * identically to i2c_add_adapter, and will dynamically assign a bus number.
+ *
  * If no devices have pre-been declared for this bus, then be sure to
  * register the adapter before any dynamically allocated ones.  Otherwise
  * the required bus ID may not be available.
@@ -940,6 +943,8 @@ int i2c_add_numbered_adapter(struct i2c_adapter *adap)
        int     id;
        int     status;
 
+       if (adap->nr == -1) /* -1 means dynamically assign bus id */
+               return i2c_add_adapter(adap);
        if (adap->nr & ~MAX_ID_MASK)
                return -EINVAL;